how to make bird's nest ring diy jewelry making tutorial

How To Make: Bird’s Nest Ring

Materials: 10 Inches of 20 Gauge Copper Wire, 3 Jade Beads – Size 4 mm

Tools: Wire Cutter, Round Nose Pliers, Mandrel

Take Notice that 10” of the wire is for a ring in size 7, if you wish to make smaller or bigger ring,You need to cute more or less wire!

Step 1: Insert the bead onto the wire. It should be in the middle of it

Step 2: Wrap wire around the mandrel as shown in the photo

Step 3: Put other beads onto the wires

Step 4: Bend wires around the eye of the ring creating round shape/frame of it

Step 5: Take the ring off the mandrel

Step 6: Wrap remaining wires around the base. Trim wire if you need to and smooth the edges

Step 7: Put ring again on the mandrel (in case the band was bent a little during creating). Now your ring is ready to wear!

Design