how to make a marshmallow shooter by pierce h
Post on 24-Dec-2015
219 Views
Preview:
TRANSCRIPT
How to Make a Marshmallow Shooter
By Pierce H.
Step 1. What you need…
• Marshmallows• (22 inches of 1/2 PVC
pipe (1/2 is a the nominal diameter, its actual outer diameter is closer to 7/8 inch), 2 end caps, 2 three way junctions, and 2 elbows.)
Step 2: Cut the PVC to length• Cut 1 length of 7 inches and 5 lengths of 3 inches.
Hacksawing is a good choice for cutting this PVC to length
Step 3: Assembly• Layout your pieces and assemble them. Friction
should hold them all together.
Step 4. test.• Point the gun in a safe direction. Load a mini
marshmallow into the mouth piece, seal your lips to the mouthpiece, and give the gun a quick burst of air. Keep your ammunition sealed. Dry marshmallows don't work very well.
Conclusion
Thanks for watching!
•
top related