how to connect r8 and r10 via bt...how to connect r8 and r10 via bt turn on your tsc3 data collector...
Post on 06-Mar-2020
25 Views
Preview:
TRANSCRIPT
Page 1
How to connect R8 and R10 via BT
Turn on your TSC3 Data collector and click on Start
Start Trimble Access
Page 2
Trimble Access 2014.10 started (or Any Version)
Click on Settings
Page 3
Click on Connect
Click on Bluetooth
Page 4
Click on Configuration
Click on Add new devices
Page 5
Searching for Bluetooth Devices
Select a device to connect
Page 6
Select R10 and click next
Leave Passcode blank and hit next
Page 7
R10 added successfully
Click on Add new device
Page 8
Searching for Bluetooth Devices
Select R8 and click next
Page 9
Leave Passcode blank and hit next
R8 added successfully
Page 10
R10 & R8 and the devices list, click OK
Select your Rover and Base from the drop down list
Page 11
Select your Rover to be R10
Select your Base
Page 12
Select your Base from the drop down list and make sure it is not R10
Select your Base to be R8 and Accept
top related