heuft inline - empty bottle inspector - heuft ... · pdf fileinjection points on plastic...
Post on 14-Mar-2018
238 Views
Preview:
TRANSCRIPT
www.heuft.com
HEUFT InLine
What is the definition of an empty bottle inspection?
An all around inspection of the bottle
before filling - the HEUFT InLine sol-
ves this task using a minimum amount
of space whilst providing maximum in-
spection quality.
It is possible to detect small faults even
in difficult areas by means of the HEUFT
reflexx image processing system. The
HEUFT InLine is impressive because it
reliably detects faults with an extreme-
ly low false rejection rate whether de-
aling with stress cracks in the base of
PET bottles or transparent faults behind
embossed marks.
HEUFT offers this top-class technology
in a linear machine. This reduces the
investment and maintenance costs in-
volved. The operating advantages e.g.
during a brand change are a further
plus factor which have made this system
so successful.
HEUFT redefines the state of the art in
the empty bottle inspection sector again
and again. Standards are set by com-
bining extensive practical experience
and the use of the latest technical pos-
sibilities. New techniques are regular-
ly offered as retrofits so that this level
of technological development is al-
ways achieved. This makes the HEUFT
InLine a future-proof investment.
www.heuft.com
HEUFT InLine
The base inspection
The base inspection checks the inside
and the outside of the container base.
An in-focus and extremely high-contrast
picture of the base is taken by means of
the stroboscope illumination. Existing
structures such as knurling or embossed
marks in glass bottles as well as mould
injection points on plastic bottles are
filtered out during the subsequent pic-
ture analysis. Contamination or dama-
ge as regards the base are marked as
objects and evaluated. It is even pos-
sible to find transparent contamination
which can hardly be identified by the
human eye due to the use of optic fil-
ters.
HEUFT uses a sophisticated centring
method for the base picture so that this
also functions when the bottle material
is not optimal. The selectivity between
a small fault and tolerable fluctuations
in the bottle material therefore achieves
an impressive quality.
A 6x6 mm fault A foreign object
A 3x3 mm fault A glass splinter
www.heuft.com
HEUFT InLine
The residual liquid detection
Liquid in a container before the filling
process poses a high risk to the quality
of a product. Such residue is found in
the HEUFT InLine by means of two dif-
ferent measuring methods:
The HF detection
An electric field is generated in the base
area of the container in the case of the
high frequency measurement. Conduc-
tive liquids in a container change this
field. Even a single drop of lye can be
reliably detected in this way.
The IR detection
The infrared measurement is based on
the absorption of infrared radiation in
a liquid. Non-conductive material can
be detected by a special sensor which
measures the infrared radiation which
has passed through.
Residual liquid in a container
www.heuft.com
HEUFT InLine
The sidewall inspection
An all around view of a bottle is a basic
requirement in order to detect all possi-
ble contamination and damage. A pic-
ture is taken, the bottle is rotated and
another picture is taken in the HEUFT
InLine so that the edge areas of one
view are in the centre of the picture in
the next view.
The existing structures are examined in
the pictures of the bottles in order to
clearly differentiate these from possible
existing faults. Embossed marks which
occur in an undefined position can be
localised by means of the finely stag-
gered sectioning of the picture signal.
The image processing system is thus
in a position to detect faults which are
hidden behind such glass marks. It is
now even possible to differentiate bet-
ween common disturbing effects such
as drops of water on the bottle or scuf-
fing and opaque as well as transparent
faults due to the development of intelli-
gent filters.
Therefore HEUFT has set another miles-
tone towards optimal detection reliabili-
ty with a minimum false rejection rate.
The double sidewall inspection with a 90° rotation
www.heuft.com
HEUFT InLine
Damage to the sealing surface can je-
opardise the quality of a product and
can present a health risk to the consu-
mer. The HEUFT InLine reflexx has a
wide range of analysis tools in order to
reliably detect critical faults.
The optical arrangement with a power-
ful stroboscope illumination and a high
resolution camera provides a clear pic-
ture of the finish.
The sealing surface inspection
The picture of the finish is optimally
centred first which is an important re-
quirement in order to be able to carry
out an exact picture analysis.
The centred picture is then examined
using extensive evaluation algorithms.
The result is a clear differentiation bet-
ween common signs of wear which oc-
cur in the case of returnable bottles and
have to be tolerated and chips which
have to result in the rejection of the
container.
The sealing surface inspection
www.heuft.com
HEUFT InLine
Damage to the thread of a screw clo-
sure finish makes it difficult to open the
bottle and can cause cuts depending
on the extent of the damage.
The HEUFT thread detection inspects
the screw closure finish on a glass bottle
completely. In contrast to comparable
systems the complete thread is also ex-
amined if it has more than one thread
turn.
The thread inspection
A picture is taken of the complete cir-
cumference of the closure area by
means of two cameras and a mirror
system. The individual pictures of the
different views are then put together
and checked for faults.
The HEUFT reflexx image processing
system makes a clear separation bet-
ween uncritical signs of wear and cri-
tical chips in the thread turn possible.
The total length can also be measured
when examining the complete thread.
This ensures that smooth chips at the
beginning or end of the thread turn are
also detected.
The thread detection
www.heuft.com
HEUFT InLine
Combining two camera pictures in real
time can only be achieved by using
extremely powerful image processing
technology. The calculating speeds
of image processors available on the
market are quickly exhausted in this
connection. Therefore HEUFT develops
its own image processing systems which
are exactly tailored to the requirements
of the inspection devices.
The HEUFT reflexx image processing system
Many of the necessary picture analyses
are carried out by the HEUFT reflexx
technology at a hardware level. This
saves time which can then be used for
the subsequent analysis at a software
level.
Each individual container is meticulous-
ly inspected using this procedure even
in the case of lines with an output of
72,000 containers per hour.
The HEUFT reflexx image processing card
www.heuft.com
HEUFT InLine
The HEUFT InLine is not only impressive
due to its inspection results. Importance
was attached to optimal hygienic condi-
tions with regard to its construction.
The smooth machine platform which is
easy to wash off prevents dirt entering
the drive area where it can quickly settle
and build up. Even edges and surfaces
provide optimal conditions in order to
prevent the accumulation of germs.
HEUFT CleanDesign - tidy and clean
The surfaces to be cleaned are rela-
tively high and therefore arranged in a
user-friendly manner. They are easily
accessible and clearly visible for clea-
ning purposes. Dark corners which
could be overlooked when cleaning are
searched for in vain in the case of this
construction.
At HEUFT easily accessible maintenance
and operating elements are also part of
the HEUFT CleanDesign. A central lu-
brication system and a motor-controlled
vertical adjustment device are both ex-
amples of a clean intersection between
man and machine which makes it easy
to keep the machine in optimal conditi-
on during daily operation.
www.heuft.com
HEUFT InLine
The HEUFT InLine with HEUFT reflexx
technology offers an optimal fault de-
tection with a minimum false rejection
rate. In this way the following foreign
objects are detected with a reliability of
99.9% in a standard glass bottle and
rejected:
wire (bent open paper clip), crumpled up
film from a cigarette packet, a cigarette
filter, a razor-blade (halved lengthwise),
a drinking straw (white, upright on the
Specifications
base), a crown cork, a condom, a hypo-
dermic needle, a tamper evidence ring
for a plastic screw closure, crumpled up
paper (wet, 70 mm x 70 mm) and an
O-ring (10 mm diameter) lying on the
base.
The false rejection rate for an All Surface
Empty Bottle Inspector (ASEBI) is less
than 0.5% of the processed bottles.
Other guaranteed values for detecting
chips on finishes and threads, contami-
nation on the base and at the sidewall
and residual liquids for standard bottles
as well as individual bottles are availa-
ble upon request.
Furthermore you can ensure that your
empty bottle inspector is always ful-
ly operational using an automatic test
bottle log.
www.heuft.com
HEUFT InLine
We do everything in order to provide
the highest quality at the best price:
• the HEUFT SPECTRUM range with
a uniform hardware and software
architecture
• an in-housedeveloped imagepro-
cessing system which is optimally
tailored to the range of application
• easyintegrationintoexistinglines
• advantageoussparepartsstorage
The cost advantages with HEUFT
• minimumamountofspacerequired
• fastchangeovertimes
• changepartsnotnecessary
• fast trouble shooting due to the
HEUFT PILOT operating surface
• minimummaintenancerequired
• easy identificationofwearingparts
and spare parts due an integrated
spare parts catalogue with exploded
views and photographs
• robustandstablecomponents
• longservicelife
• hardwearingdesign
• the HEUFT TeleService - fast trou-
bleshooting by means of help for
self-help
• a future-proof investment due to
retrofit option for new technologies
• amodularsystemforeasyretrofitting
www.heuft.com
HEUFT InLine
• integratedEthernetinterfacesaswell
as TCP/IP access to all networks
• connectioncapabilitytoaprecon-
figured DDE interface and SQL
database
• theHEUFTPILOT graphical user
surface with a comprehensible
menu structure for easy operating
Networking
• operationpossibleeitherviajog
shuttle or touchscreen on the
TFT screen at the device or via a
network
• automatictransferofcounter
readings or fault messages by SMS
to a mobile phone or by e-mail if
required
• firewallprotectedconnectionto
the remote service by Ethernet –
the HEUFT TeleService can access
the line directly and rectify faults
at short notice by means of remote
diagnosis if the customer wishes
www.heuft.com
HEUFT InLine
• multilingual,simplyarranged,com-
prehensible menu structure with
extensive help boxes and complete
on-line user‘s manual - the opera-
ting surface can be supplied in any
language / graphic characters if
required
• easyidentificationofsparepartswith
online and offline spare parts list with
photographs and exploded views - the
The HEUFT PILOT
order can be sent from the device
either to an internal purchasing de-
partment or directly to HEUFT
• password-protectedoperatorlevels,
can be adjusted to suit the tasks of
the operating staff, the quality assu-
rance department etc.
• clear fault messages with service
notes and support in order to avoid
downtimes
• the operator receives all the infor-
mation during a brand changeover
regarding the necessary steps in
order to exclude possible operating
errors
www.heuft.com
HEUFT InLine
The HEUFT flip The HEUFT DELTA-K The HEUFT DELTA-FW
Different rejection systems are used for
the HEUFT InLine depending on the
application.
The HEUFT DELTA-FW
• arobustall-roundsystemforspeeds
up to 72,000 containers per hour
• lyingcontainers,foreignobjectsand
burst bottles in the infeed area are
cleared away
HEUFT rejector
The HEUFT flip
• asingle-segmentrejectorforcylind-
rical containers
• par t icular ly smooth transversal
acceleration of the containers
• an ex tremely compact, hygienic
construction
The HEUFT mono
•asingle-segmentrejectorforcylind-
rical containers
•an ex tremely compact, hygienic
construction
The HEUFT DELTA-K
• a multi-segment rejector which is
particularly well suited for the empty
bottle section
• smoothrejectionofshapedorunsta-
ble containers by means of single-
point guidance
www.heuft.com
HEUFT InLine
The HEUFT fluid The HEUFT eXaminer XAThe HEUFT SX
The following products may also be of
interest to you:
The HEUFT SX
• sortsreturnableglassandPETbottles
• upto72,000bottlesperhour
• ensuresanunmixedcontainerflow
• compact construction, minimum
space required
Other HEUFT products
The HEUFT eXaminer XA
• anX-rayinspectionforfilledcontainers
• lowradiationrates
• thedetectionofforeignobjectseven
if the container bases are curved
• an optimal detection by using the
HEUFT reflexx image processing
technology
The HEUFT fluid
• thedetectionofresidualliquidsand
metal closures
• upto120,000bottlesperhour
The HEUFT synchron
• carefulbottletransport
• pressureless combining of contai-
ners
• forglassandPETbottles,cansand
plastic containers
CONTACT DETAILS
HEUFT QUALIPLUS B.V.
Deventer, NETHERLANDS
Phone: + 31 570 6617 00
netherlands@heuft.com
HEUFT SYSTEMTECHNIK GMBH
Burgbrohl, GERMANY
Phone: +49 2636 56 0
info@heuft.com
HEUFT LTD.
Tamworth, GREAT BRITAIN
Phone: +44 1 827 25 5800
uk@heuft.com
HEUFT HISPANIA, S.A.
Madrid, SPAIN
Phone: +34 91 6667 300
spain@heuft.com
HEUFT FRANCE S.A.
Brumath, FRANCE
Phone: +33 388 59 3000
france@heuft.com
HEUFT ITALIA s.r.l.
Vigevano, ITALY
Phone: +39 0381 290411
italy@heuft.com
HEUFT SCAN Aps
Gilleleje, DENMARK
Phone: +45 4836 5070
scandinavia@heuft.com
HEUFT USA Inc.
Downers Grove, USA
Phone: +1 630 968 9011
usa@heuft.com
INTERNET:
www.heuft.com
E-MAIL:
info@heuft.com
HEUFT DO BRASIL Ltda.
Alphaville-S.P., BRASIL
Phone: +55 11 4195 7671
brasil@heuft.com
HEUFT S.A.
Beccar, ARGENTINA
Phone: +54 11 4719 6945
argentina@heuft.com
HEUFT MEXICO S.A. de C.V.
México,D.F.,MEXICO
Phone: +52 55 5562 8450
mexico@heuft.com
HEUFT Systems Technology Co., Ltd.
Shanghai, CHINA
Phone: +86 21 6434 3911
china@heuft.com
OOO HEUFT EURASIA
Moscow, RUSSIA
Phone: +7-495-935-8704
eurasia@heuft.com
HEUFT ASIA LTD
Hong Kong, CHINA
Phone: +86 21 6434 3911
asia@heuft.com
HEUFT AUSTRIA GMBH
Leobersdorf, AUSTRIA
Phone: +43 2256 65556 0
austria@heuft.com
HEUFT SYSTEMTECHNIK GMBH | Brohltalstr. 31-33 | 56659 Burgbrohl | Germany | Phone: +49 2636 560 | Fax: +49 2636 562 56 | info@heuft.com | www.heuft.com
HM
DIR
P00
2 EN
G 1
.02
FUNCTIONS• baseinspection• inspectionofthefinisharea• sidewallinspectionfordetecting contamination and damage• inspectionfordetectingdamage to the thread
• inspectionespeciallyfordetecting transparent foil in a bottle• mineralringdetection• scuffingdetection• tworesidualliquiddetections(forlyeand
water as well as varnish and oil) [more] *
THE ADVANTAGES• series productionmakes short delivery
times and a very attractive price possible
The HEUFT InLine empty bottle inspectionfor containers made of glass and of plastic
* [more] detailed information on www.heuft.com/ir
Fast and precise reproducible brand adjustments [more] *
Very hygienic due to open construction and machine platform with flangeless superstructure [more] *
The HEUFT reflexx image processing system for the highest in-spection quality with a minimum false rejection rate [more] *
Excellent detection quality due to tailored hardware and software [more] *
Folding sidewall module for optimal accessibility [more] *
• simpleupgradingand retrofitting due to modular design• integrated,future-proof network interface (Industrial Ethernet and TCP/IP)• remoteserviceconnectionvia the Inter face and SQL/DDE data bank interface [more] *
980615
14701000-1500
www.heuft.com
HEUFT InLine
空瓶检测的定义是什么?
灌装机前的瓶子的全身检测- HEUFT InLine
在提供最大检测质量的同时使用最小空
间解决这个任务。
通过HEUFT reflexx图象处理系统可以检
测即使 是在 艰 难区域内的小的故
障。HEUFT InLine给人留下深刻的印象,
因为它处理PET瓶子的应力裂纹或者细纹
标记后的透明故障时能够以非常低的误
剔除率可靠的检测故障。
HEUFT在一个直线机器内提供这个高级
的技术。这减少了投资和相应的维护成
本。操作优点例如在瓶型变化期间是一
个额外的因素,使得该系统非常成功。
HEUFT在空瓶检测设备一次又一次的重
新定义了先进的技术水平。通过结合广泛
的实践经验和使用最新的技术来设置标
准。通常情况下通过升级使设备能保持该
技术领域领先的发展水平。这使得HEUFT
InLine成为着眼为未来明智的投资。
www.heuft.com
HEUFT InLine
瓶底检测
瓶底检测检查容器底部的内部和外
部。通过频闪观测仪照明获取瓶底的清
晰的高对比度照片。已有的结构,例如玻
璃瓶内的压花或者细纹标记和塑料瓶上
的模具注射点在后来的图片分析中都被
过滤掉。瓶底的污染或损坏标记为异物
并被评估。使用光学过滤器甚至能够找
到人类肉眼很难识别的透明污染。
HEUFT使用成熟的瓶底图片对中技术使
当瓶子的材料不是最佳的时候该功能也
能使用。因此,瓶子材料的小的故障和相
当大的波动之间的选择性达到了一个给
人深刻印象的检测质量。
6x6 mm故障 异物
3x3 mm故障 玻璃碎片
www.heuft.com
HEUFT InLine
残液检测
灌装过程前的容器内的液体对产品的质
量造成一个很大的危险。HEUFT InLine通
过两个不同的测量桥找到这样的残留:
HF高频检测
在高频测量的情况下,容器底部区域产生
导电区域。容器内的液体改变一个电场的
情况。这样,即使一滴碱液也能被可靠的
检测出来。
IR红外线检测
红外线测量基于液体内红外线辐射的吸
收。非传导材料可以通过一个特殊的传感
器测量通过的红外线辐射检测出来。
容器内的残留液体
www.heuft.com
HEUFT InLine
侧壁检测
为了检测所有可能的污染和损坏,需要一
个瓶子的全身视图。HEUFT InLine获取一
个图片,旋转瓶子,然后获取另一个图片
使一个视图的边缘区域在下一个视图的
图片的中间。
在瓶子的图片里检查已有的结构以便清
晰从可能存在的故障中区分开来。某个未
定义位置里的细纹标记可以通过图片信
号的精确交错截面来定位。因此,图象处
理系统处于一个检测隐藏在这样的玻璃
标记后的故障的位置。甚至可以区分一
般的干扰效果例如瓶子上的水滴或刮伤
和由于只能过滤器发展而产生的不透明
和透明的缺陷。
因此,HEUFT树立了一个最小误剔除率优
化检测可靠性的里程碑。
双侧壁检测,旋转90°
www.heuft.com
HEUFT InLine
密封表面的损坏可能危及产品的质量并
对消费者呈现出健康危险。HEUFT InLine
reflexx具有广范围的分析工具以便可靠的
检测严重的故障。
带有强大的频闪观测仪照明和高分辨率
照相机的光学排列提供一张清晰的瓶口
图片。
密封表面检测
瓶口的图片优先居中,这是一个重要的要
求,以便能够进行准确的图片分析。
然后使用广泛的评估算法检查居中的图
片。
结果清晰的区分了返回瓶子所发生的必须
允许的一般的损坏标记和导致容器剔除
的碎片。
密封表面检测
www.heuft.com
HEUFT InLine
螺旋封盖瓶口的螺纹的损坏使得难以打
开瓶子而且可能根据损坏的范围而导致
切口。
HEUFT螺纹检测完全检测玻璃瓶上的螺
旋封盖瓶口。和比得上的系统相比较,如
果有不止一个螺纹旋转,整个螺纹都要
检查。
螺纹检测
通过两个照相机和一个镜子系统获取封盖
区域的整个圆周的图片。然后不同视图的
单独的图片放在一起并检查故障。
HEUFT reflexx图象处理系统可以清楚的
分离不严重的磨损标记和螺纹旋转的严
重的碎片。总长度也可以在检查整个螺纹
的时候测量。这样保证了也能检测到螺纹
旋转的开始和末端的光滑碎片。
螺纹检测
www.heuft.com
HEUFT InLine
只有使用非常强大的图象处理技术才能实
时地结合两个照相机图片。市场上图象处
理器的计算速度往往达不到这样的技术要
求。因此,HEUFT研发了自己的图象处理系
统,非常精确的适合检测设备的需求。
许多必要的图片分析通过HEUFT reflexx
技术以一个硬件水平来进行。这节省了时
间,这些时间可以用于后来软件水平的
分析。
HEUFT reflexx图象处理系统
使用该程序小心的检测每个单独的容
器,即使是在生产线每小时输出72,000个
容器的情况下。
HEUFT reflexx图象处理系统
www.heuft.com
HEUFT InLine
HEUFT InLine由于其检测结果不仅仅给
人留下了深刻的印象。关于其结构的最好
的卫生条件也是很重要的。
容易清洗的光滑的机器平台阻止灰尘进
入快速解决并增大的驱动区域。为了阻止
细菌的堆积,即使是边缘和表面也提供
最好的条件。
HEUFT CleanDesign – 整齐干净
需清洁的表面相当的高,因此以一种用户
友好的方式来安排。为了清洁目的,他们
很容易达到并清晰可见。在该结构的情
况下,尝试寻找清洁时可能忽视的死角是
徒劳的。
在HEUFT,很容易达到的维护和操作元
件也是HEUFT CleanDesign的一部分。中
央润滑系统和电机控制的垂直调节装置
也是人工和机器之间清洁交叉的例子,
这使得在日常操作期间容易保持机器处
于最佳条件。
www.heuft.com
HEUFT InLine
带有HEUFT reflexx技术的HEUFT InLine
提供了最佳故障检测,误剔除率最小。这
样以下标准玻璃瓶中的异物被以99.9%的
可靠性检测并被剔除:
电线(弯曲打开的纸夹),香烟包装上起
皱的薄膜,香烟过滤器,剃刀刀片(纵向平
分),吸管(白色,底部直立),皇冠盖,避
孕套,皮下注射器针头,塑料螺旋封盖的
颈环,起皱的纸(湿的,70 mm x 70 mm)
和瓶底的O型环(10mm直径)。
说明
全部表面空瓶验瓶机(ASEBI)的误剔除
率小于处理瓶子的0.5%。
检测瓶口和螺纹上的碎片,瓶底和侧壁上
的污染和标准瓶子的液体以及每个单独的
瓶子的其他保证值按照要求有效。
而且你能够通过使用自动测试瓶日志确
保你的空瓶验瓶机总是处于完全操作状
态。
www.heuft.com
HEUFT InLine
我们所做的一切只是为了以最好的价格
提供最高的质量:
• HEUFT SPECTRUM带有统一的硬件和
软件结构
• 室内研发的图象处理系统最适合应用
范围
• 容易整合到已有的生产线
• 有利的备件存储
• 仅需要很少的空间
使用HEUFT产品的成本优势
• 快速的转换时间
• 改变不需要的备件
• HEUFT PILOT操作终端所带来的快速
故障解决
• 需要的最小维护
• 由于其集成的带有暴露的视图和图片
的备件目录而容易识别的磨损件和备
件
• 稳定的组件
• 长期使用寿命
• 耐磨设计
• HEUFTTeleService - 通过帮助快速
自助解决故障
• 由于其新技术的翻新选项而被未来证
明了的投资
• 模块化系统容易升级
www.heuft.com
HEUFT InLine
• 操作可能通过设备TFT屏幕上的点动闸
或者触摸屏或者通过网络
• 综合的以太网界面和TCP/IP访问所有
的网络
• HEUFT PILOT图表操作界面带有容易
理解的菜单结构容易操作
• 自动通过SMS如果必要的话通过电子
邮件把计数器读数或者故障信息传输
到移动电话上
网络
• 到一个重新配置的DDE界面和SQL数
据库的连接能力
• 通过以太网把防火墙保护连接到远
程服务上– 如果客户愿意,HEUFT
TeleService可以通过远程诊断的方式
直接访问设备并短时间内矫正故障
www.heuft.com
HEUFT InLine
• 使用多种语言,简单计划,带有广阔的
帮助盒和完整的在线用户手册的容易
理解的菜单结构-如果需要的话,该操
作界面可以应用任何语言/图解符号
• 拥有在线和离线带有照片和公开视图
的备件清单容易识别备件- 订单可以
从设备处发往内部采购部门或者直接
发往HEUFT
HEUFT PILOT
• 密码保护的操作员级别可以调节以
适应操作人员,质量保证部门等的任
务。
• 清除带有服务注意事项和支持的错误
信息以避免停工期
• 在瓶型转换期间,操作员接收关于必
要步骤的所有信息以便排除可能的操
作错误
www.heuft.com
HEUFT InLine
HEUFT flip HEUFT DELTA-K HEUFT DELTA-FW
HEUFT InLine根据应用软件使用不同的
剔除系统。
HEUFT DELTA-FW
• 多功能的系统,速度达到每小时
72,000个容器
• 清除进瓶区域的倒瓶,异物和爆瓶
HEUFT剔除器
HEUFT flip
• 用于圆柱形容器的单段剔除器
• 容器非常平稳的横向加速度
• 一个非常紧密卫生的结构
HEUFT mono
•用于圆柱形容器的单段剔除器
• 一个非常紧密卫生的结构
HEUFT DELTA-K
• 多段剔除器尤其非常适合空瓶部分
• 通过单点指导平稳剔除成形的或者不
稳定的容器
www.heuft.com
HEUFT InLine
HEUFT fluid HEUFT eXaminer XAHEUFT SX
你也许对以下产品感兴趣:
HEUFT SX
• 分类返回的玻璃和PET瓶子
• 多达72,000瓶每小时
• 确保不混合瓶流
• 满足最小空间需求的紧凑结构
其他HEUFT产品
HEUFT eXaminer XA
• 灌装容器X-ray检测
• 低辐射率
• 检测异物,即使容器底部弯曲
• 通过使用HEUFT reflexx图象处理技术
的最优检测
HEUFT fluid
• 检测残留液体和金属封盖
• 多达120,000瓶每小时
HEUFT synchron
• 小心的瓶子传输
• 无压力组合容器
• 玻璃瓶和PET瓶,罐子和塑料容器
联系方式
HEUFT QUALIPLUS B.V.
Deventer, NETHERLANDS
电话: + 31 570 6617 00
netherlands@heuft.com
HEUFT SYSTEMTECHNIK GMBH
Burgbrohl, GERMANY
电话: +49 2636 56 0
info@heuft.com
HEUFT LTD.
Tamworth, GREAT BRITAIN
电话: +44 1 827 25 5800
uk@heuft.com
HEUFT HISPANIA, S.A.
Madrid, SPAIN
电话: +34 91 6667 300
spain@heuft.com
HEUFT FRANCE S.A.
Brumath, FRANCE
电话: +33 388 59 3000
france@heuft.com
HEUFT ITALIA s.r.l.
Vigevano, ITALY
电话: +39 0381 290411
italy@heuft.com
HEUFT SCAN Aps
Gilleleje, DENMARK
电话: +45 4836 5070
scandinavia@heuft.com
HEUFT USA Inc.
Downers Grove, USA
电话: +1 630 968 9011
usa@heuft.com
INTERNET:
www.heuft.com
E-MAIL:
info@heuft.com
HEUFT DO BRASIL Ltda.
Alphaville-S.P., BRASIL
电话: +55 11 4195 7671
brasil@heuft.com
HEUFT S.A.
Beccar, ARGENTINA
电话: +54 11 4719 6945
argentina@heuft.com
HEUFT MEXICO S.A. de C.V.
México, D.F., MEXICO
电话: +52 55 5562 8450
mexico@heuft.com
HEUFT Systems Technology Co., Ltd.
Shanghai, CHINA
电话: +86 21 6434 3911
china@heuft.com
OOO HEUFT EURASIA
Moscow, RUSSIA
电话: +7-495-935-8704
eurasia@heuft.com
HEUFT ASIA LTD
Hong Kong, CHINA
电话: +86 21 6434 3911
asia@heuft.com
HEUFT AUSTRIA GMBH
Leobersdorf, AUSTRIA
电话: +43 2256 65556 0
austria@heuft.com
HEUFT SYSTEMTECHNIK GMBH | Brohltalstr. 31-33 | 56659 Burgbrohl | Germany | Phone: +49 2636 560 | Fax: +49 2636 562 56 | info@heuft.com | www.heuft.com
HM
DIR
P00
2 C
HI 1
.02
功能
• 瓶底检测
• 瓶口区域检测
• 侧壁检测检测污染和损坏
• 检测螺纹的损坏
• 瓶子里透明铝箔的检测
• 矿物环检测
• 刮伤检测
• 两个残留液检测(检测碱和水以及漆
和油)
[更多]*
优点
• 系列产品缩短运输发货时间,可以使价
格更优惠
HEUFT InLine空瓶检测用于玻璃和塑料容器
* [更多]详细信息
请登录 www.heuft.com/ir
快速精确的重新再生
产瓶型调节
[更多]*
由于打开的结构和带有无凸
缘的上层结构的机器平台而
非常卫生 [更多]*
HEUFT reflexx图象处理系统以
最小的误剔除率达到最高的检
测质量 [更多]*
由于适合的硬件和软件而具
有的非常好的检测质量 [更多]*
可以达到最优的折
叠侧壁模块 [更多]*
• 由于模块化设计而具有的简单升级和
更新
• 综合的禁得住未来考验的网络界
面(工业以太网和TCP/IP)
• 通过界面和SQL/DDE数据库界面的远
程服务连接
[更多]*
980615
14701000-1500
top related