hdd mobile dvr manual
Post on 17-Jan-2022
8 Views
Preview:
TRANSCRIPT
HDD Mobile DVR Manual
版本号 20101210 1
HDD Mobile DVR Manual
HDD Mobile DVR Manual
版本号 20101210 2
Catalogue
1 Product Specification .................................................................................................................. 3
2 Product Applications ................................................................................................................... 6
3 Appearance of Product ................................................................................................................ 6
4 Remote Control Function Instruction ....................................................................................... 13
5 Device Functions and Operation Guide .................................................................................... 15
5.1 User Login......................................................................................................................... 17
5.2 General Setting .................................................................................................................. 18
5.2.1 Basic Setting ................................................................................................................. 18
5.2.2 Vehicle Setting .............................................................................................................. 20
5.2.3 Channel Setting ............................................................................................................. 20
5.2.4 Record Setting ............................................................................................................... 22
5.2.5 Network Setting ............................................................................................................ 24
5.2.5.1 Local network ....................................................................................................... 24
5.2.5.2 3G Setting ............................................................................................................. 25
5.2.5.3 WIFI Setting ......................................................................................................... 26
5.2.5.4 Center Setting ....................................................................................................... 27
5.2.6 Alarm Setting ................................................................................................................ 27
5.2.6.1 IO setting ............................................................................................................... 28
5.2.6.2 Speed Setting ........................................................................................................ 29
5.2.6.3 Accelerate Setting ................................................................................................. 30
5.2.6.4 Termperature Setting............................................................................................. 31
5.2.7 Display Setting .............................................................................................................. 31
5.3 Record Search ................................................................................................................... 32
5.4 Manage tool....................................................................................................................... 34
5.4.1 User Account ................................................................................................................. 34
5.4.2 Disk Manage ................................................................................................................. 36
5.4.3 System upgrade ............................................................................................................. 36
5.4.4 Config Manage.............................................................................................................. 37
5.4.5 Log search ..................................................................................................................... 38
5.4.6 Abnormal manage ......................................................................................................... 40
5.5 Peripheral .......................................................................................................................... 40
5.5.1 VGA .............................................................................................................................. 41
5.5.2 PTZ ................................................................................................................................ 42
5.6 System Information ........................................................................................................... 43
HDD Mobile DVR Manual
版本号 20101210 3
1 Product specification
HDD MDVR (Automotive) is a cost-effective, functional and scalable device designed for
video surveillance and remote monitoring of your mobile assets. It uses a high-speed
processor, an embedded Linux platform and combines the most advanced IT processes such
as H.264 Video Compression/Decompression, networking and GPS positioning technology.
MDVR enables CIF, HD1 and D1 video formats. Drivers' driving information, recording and
wireless data are uploaded to SD Memory Cards which are used as the storage medium. A
MDVR centric software platform (CMS) can be realized with links to a Central Alarm
monitoring system for remote management and playback analysis. The MDVR may look
simple in its exterior design, provides powerful auto black box features, installation
flexibility and high reliability.
MDVR Specifications to see Table 1
Table1: MDVR Specifications
Items Parameters Specifications
System
Language Chinese/English
Operation Menu Graphical User interface(OSD menu)
Password Users Password/ Administrator Password
Video
Video input 4-CH video input 1.0Vp-p,75Ω
Video output 1-CH video COMPOSITE output 1.0Vp-p,75Ω
Video Display 1 channel or synchronous 4 channels
Video Singal PAL、NTSC
Video
Compression
H.264 Main profile
PAL:100f at D1/s, NTSC: 120f at D1/s
Audio
Audio input 4-ch Audio input
Audio output 1-ch Audio output
Recording mode Audio & Video sync Recording
Image Video format CIF/HD1/D1 option
HDD Mobile DVR Manual
版本号 20101210 4
processing &
storage
Video stream
Stardard ISO14496-10
Video bitrate
CIF: 1536Kbps ~ 128Kbps , 4 levels optional.
Highest:0 level Lowest: 3 level
HD1: 2048Kbps ~ 512Kbps , 4 levels optional.
Highest:0 level Lowest: 3 level
D1: 4Mbps ~ 1Mbps,4 levels optional. Highest:0
level Lowest: 3 level
Audio Bitrate 8KB/s
Storage Support One HDD Max 1TB
Alarm
Alarm input 8 alarm input,below 4V is low level alarm 4V,above 4V
are up level alarm
Alarm output 2 alarm output,output up level:12V
Communication
Interface
RS485 Interface Support 2-RS485 interface
RS232 Interface Support 1-RS232 interface
WIFI Interface Support 802.11b/g
Extended
interface
Support connecting Auto Station Reporter or control panel via extended
interface
Audio amplifier
interface Support 2ch Audio output, can contact 20W speaker directly
3G
Communication WCDMA/EVDO Optional
GPS Built-in GPS module, Geographic co-ordinates 、 speed can be read in
coding flow,and can be uploaded via wireless
Acceleration
Sensor Built in acceleration G-Sensor
HDD Mobile DVR Manual
版本号 20101210 5
Software
Analysis of PC
playback
Playback Recording on PC,and analyse the vehicle
recording info.
CMS
Via Wifi, to meet Video preview、GPS upload、alarm
upload, central command and parameters configuration,
etc
Software
Upgrade Support Flash disk to upgrade
MDVR electric Specifications to see Table 2
MDVR Electric Specifications
Items Parameters Specifications
Power input 8—36V +8V~+36V, When long-term under 8V, or long-term over
36V, Auto power off, enter protected mode.
Power output 12V 12V(+/-0.2V),Max:2A.
Vehicle key
signal
≤4V OFF
≥5V ON
Video input
impedance 75Ω 75Ω for each video input impedance
Video output
Volt 2Vp-p
Input 2Vp-p CVBS analog signal, reveal device input need
75Ω impedance to fit
I/O interface 0—4V Low level alarm
4V 以上 High level alarm
Operating Temp 40℃-80℃ Under well-ventilated enviroment.
HDD Mobile DVR Manual
版本号 20101210 6
2 Product Applications
3 Appearance of Product
1.The whole appearance
The whole appearance as picture 2:
HDD Mobile DVR Manual
版本号 20101210 7
Picture 2 :MDVR whole appearance
2. Device Drawing Dimension & Install Holes
As picture 3:
Picture 3: Device Dimention and Hole Drawing
3. Front & Back Panel led & Plug-in module.
As picture 5:
HDD Mobile DVR Manual
版本号 20101210 8
Picture 4: 4 Channel Front Panel LED Drawing
Front Panel definition as below:
Front Panel definition Drawing
Interface Items Description
Vedio out V-OUT Video analog output
Audio out A-OUT Audio Analog Output
LED
HDD light on if HDD exist,flash when recording
REC Recording LED , light on when recording
GPS GPS singal LED , light on when GPS module
exist ,flash if singal exsitGPS
POWER Power LED ,light on when power work
normally
ALM Alarm LED, light on when device work
abnormally
CAM1/CAM2/CAM3/CAM4
Light on as CAM1/CAM2/CAM3/CAM4 has
signal, or else, no light on
WIFI Light on when WIFI module exist
2G/3G Light on when 3G module exist
USB Light on when USB removable disk is inserted
SD Light on if SD card exist
HDD Mobile DVR Manual
版本号 20101210 9
HTR Light on when heated
IR receiver IR Receive remote control singal
Electronic
key LOCK
When device is working unlock the
E-key,system will power off ,lock the E-key .system
will work normally
Network
Interface RJ45
Insert network cable ,the LED will light on
when network is connected successfully
Back panel inteface definition :
1.
HDD Mobile DVR Manual
版本号 20101210 10
picture 5: 4 Channel Back Panel Interface Drawing
Back panel inteface definition as picture 4:
Table 4: Back panel inteface Definition Table
Interface Items Description
WIFI Antenna Inteface WIFI Wireless Lan antenna interface,support
two interfaces
GPS Antenna Inteface GPS GPS Antenna Inteface
2G/3G Antenna
Inteface
2G/3G 2G/3G Antenna Inteface
Power Input Interface DC8-36V Power input interface
Printer Interface MCU/ICP System debugging information interface
Extention Interface EXTENTION Control panel interface
Sensor Interface ALARM IN/OUT Swich input interface,high level(>4V)
Vehicle speed pulse
input interface
SPEED Input Vehicle speed pulse singal ,
differential input
Serial Interface
RS485 2 RS485 interface
Serial Interface
RS232 1 RS232 interface
Speaker Interface SPEAKER Audio power amplifier output
USB Interface USB&SATA Mirror image recording storage media
HD Vedio Output
Interface
CVBS&VGA HD Vedio Output Interface
5. Power cable
Power cable as picture 9,one end is 6pin white plug , it connect with the 6pin white plug of
device back panel.The red and black cables are directly connect to the vehicle's battery. Red
cable to positive , black cable to negtive. Yellow cable is FIREWIRE. The device will
HDD Mobile DVR Manual
版本号 20101210 11
automatically start when turn on the vehicle key ,and close when turn off the vehicle key . Yellow
cable is connected to the gear that vehicle key open all the dashboard light(the gear of
starting vehicle motor ).
Notes:
1)Before connecting, confirm the voltage is between 8V—36V or else ,if over this range ,the
device will be fired
2)After connecting the cables, Ensure that power cables are insulated to prevent short circuiting
and burning out the battery.
3)The Yellow cable must be connected to the vehicle ignition cable, otherwise the device will not
be able to execute the delayed shutdown and the final moment of the video will be lost;
4)Note: Connection to the vehicle's engine must be connected directly to the positive anode of
the battery. Do Not Use bond strap for grounding as it will produce negative pulses that would
interfere the device's normal operation. The negative pole of the power code must be Φ1.5mm and
above.
picture 6: Power Input Cable Piture
6.GPS antenna
As picture 7:
GPS antenna
HDD Mobile DVR Manual
版本号 20101210 12
Picture 7: GPS antenna
7.Alarm input and output:
The device has 8 alarm input and 2 alarm output interfaces. Alarm input detection is level
detection.Various state of alarm level can be detected while the vehicle is in motion, such as
braking, steering horn etc. Below is a diagram that shows when the braking vane Is depressed, the
MDVR would be able to detect the high level, otherwise, just detect the low level.
Alarm outputs are level output drive capability for the 200MA, if you want to drive relatively
large power device, must connect external relay. Shown below is the Alarm output photoelectric
alarm wiring diagram.
8. Device Installation Guide
A Inspecting the Accessories
After unpacking, please check the device for damage or deformation. If there are, please do
not install the device and get in touch with the supplier. In the product box there is a packing list.
Please cross check this list with the device and its accompanying accessories.
B HDD、SIM card、SD card installation
Unlock by the key, insert the HDD into the HDD slot in front of the mainframe. Notice: if
draw out THE HDD,the front part of HDD should has a space of over 150cm(the length of
HDD),SIM card is located on the communication board,move the small baffle at the bottom of
the mainframe,you can see the interface of SIM card .
Connect MDVR
sensor input cable
Stoplight
lissihohao
hodihfoah
odlight
+24V Braking vane
24V MDVR alarm output
HDD Mobile DVR Manual
版本号 20101210 13
If system support wireless network communication, need install SIM card; SIM card and
SIM are in the same location,you can see them ,just when you move the baffle at the bottom
of the mainframe .
4 Remote Control Function Instruction
There is no control button on MDVR panel, need remote control to fit operating
Key-press & function as below:
Digit keys zone:
【0-9】key:Under setting,use for select digit. During playback and preview,1、2、
3、4 is for the switch of the channels
【+】、【-】key:adjust digit when plus or deduct
【ENTER】key:under setting,means select and save
On playback condition, press ENTER can reveal parameters in OSD OVERLAY menu
when it‟s ON on screen.
Other function keys :
HDD Mobile DVR Manual
版本号 20101210 14
Figure 8 Other function keys on remote control
Startup/power off Through screen, press this button twice for reboot(soft start key)
(note:can‟t be use now)
LOGIN
When setting password,press LOGIN input password。
Do please remember password due to device have no reset
function.
INFO Check info
Digit keys1,2,3,4
Switch between 1-channel and 4-channel version. Press it, show
4-channel. Press digit key 1,2,3,4, can separately switch to
CH1,CH2,CH3,CH4
RETURN Return to up grade, exit setup menu and return to screen.
PAUSE / STEP When playback recording, press STEP, a time play a step, press
PAUSE, it stop. Press play key, then normally play.
GOTO When play back, press it can jump to designated time and play.
FRAME Press FRAME key, then FRAME play.
(PLAY) PLAY key, (when PAUSE, it will show still image)
FWD FWD for playback recording, 4 grades: 2X,4X,8X,16X
REW REW for playback recording, 4 grades: 2X,4X,8X,16X
■ Stop manual recording key
● Start manual recording key
NEXT Turn to next page/ next file when playing.
PREV Turn to previous page/ previous file when playing
AUTO、PRESET、
ZOOM+/- 、
FOCUS+/- 、
IRIS+/- 、 PTZ 、
PRESET 、
RECALL、BRUSH
PTZ function keys
HDD Mobile DVR Manual
版本号 20101210 15
F1、F2、F3 F1 is shortcut key,F2,F3 are Spare keys. (Reserved for future)
5 Device Functions and Operation Guide
The System include five modules:general setup、record search、manage tool、peripheral,system
info.Function Structure refer to Pic.8
Notice:
1.All of below sub-menu setting will only be effective after confirm”Save”,Otherwise the setting
is noneffective.
2.There will be a yellow frame surround the icon,means means secleted the fucstion.Otherwise
means not.
3. Number input could use both the number key in the IR Remote and soft keyboard.While the
number enter coulde only use the soft keyboard.Press “Return” to back to the Sub-menu.
HDD Mobile DVR Manual
版本号 20101210 16
Basic Setup
Power Setup
Network Setup
Password
Setup
Normal Setup
Channel Setup
Timer Setup
Sub-stream
Setup
Sensor Setup
Speed Setup
Acceleration
SetupTemperature
Setup
Format
Configure
Setup
Upgrade
LOG Search
3G Setup
WIFI Setup
Login
System Setup
Record Setup
Vehicle Setup
Tools
Playback
Shortcut
Module
System
Information
Picture 8: Functions Structure
HDD Mobile DVR Manual
版本号 20101210 17
5.1 User Login
Connect power cable ,then press LOGIN on remote control to operate,
As picture 9:
Picture 9:Login
Instruction:
1.Device No.:Set the Series No.for each device.It will show on the right side of the series
No.input frame.Users just input the same No. as it show
2.User‟s Name and Password:Set the user‟s info in the user‟s management module in
system.Input user‟s name and the password,enter the system and operate
according to the permission
After log in,users will see the main menu of the system.as Picture 10:
Picture 10:Menu
HDD Mobile DVR Manual
版本号 20101210 18
5.2 General Setting
General Setting including 7 functions:Basic,vehicle setting,channel setting, record
setting,network setting,alarm setting and display setting,as picture 11:
Picture 11:Gengeral Set
5.2.1 Basic Setting
As picture 12:
Picture 12: Basic Set
Instruction:
1. Time Setting:User can set the time,If choose “24 hours”time version,it could set the tiem
HDD Mobile DVR Manual
版本号 20101210 19
within 24 hours,otherwise could only set the time within 12 hours.The revised time will be
controled by the system,For example,The tens digit of hour could set “2” as the biggest,if the input
number is bigger than “2”,it will default as “2” automaticly.
Select the column you need to revise,move the cursor to the number you need to revise,and
input the new number directly.
2.Date Setting:User can set the date, The revised date will also be controled by the system,For
example,The tens digit of monte could set “1” as the biggest,if the input number is bigger than
“1”,it will default as “2” automaticly.
Select the column you need to revise,move the cursor to the number you need to revise,and
input the new number directly.
3.Time Version:User select this column,then press”enter” to open the fram,choose on/off,then
press”enter”to enable the function.The selected letter will be white color.Wehn choose “on”,the
time version will be 24 hour version.When “off” the time version will be 12 hour version,and it
will be a “AM/PM” option behine the time frame.Not matter on/off,the recording package time
use 24 hours version
4.Date :Operation way as above
5.Time zone: Operation way as above,different area user could choose their local time zone.
6.OPR Time Out:Operation way as above,There are 1/5/15min three options.
7.Timing Mode:Three options:Manual,NTP,Auto.When select “Auto”,it will adjust the time
auto via GPS.When select “Manual”,user could only revise the system time by themselves.When
select “NTP”,I will show “NTP IP”,”NTP” two column.Input the server IP in the NTP IP
column,if select “auto” in the NTP mode,when achieve the adjusted time,the timing will be
automaticlly done via server.
8.Timing Time:Input the GPS auto timing time.
9.Power Mode:There are “Ignition/Timing” two options.Ignition:The DVR will be auto power
on when the vehicle start the engine,auto shut down when the vehicle turn off.Choose this
mode,could set shut down delay(5-180min).
Timing mode:the DVR will auto power on at the setting time.When choose this mode,user
should set the auto power on/off time,timing recording
HDD Mobile DVR Manual
版本号 20101210 20
5.2.2 Vehicle Setting
As bellow:
Picture 13 :Vehicle Set
Instruction:
1.Dev Num:User can set the Dev Num in this module.
2.Dev S/N:The Dev S/N is only series NO.for each device when leaving factory,It is written into this
chip,could not be revised.User could check it here.
3.The use of Soft Keyboard:Chinese/English.When input English,choose the letter and
press[enter].Press 【 S】to input the block letters.
4.Company name,Vehicle Number,Driver Name,Route No:Select the column and input the
number;Press [Enter] into the soft keyboard screen
5.2.3 Channel Setting
As picture 14:
HDD Mobile DVR Manual
版本号 20101210 21
Picture 14:Channel Set
Instruction:
1. Channel:There are 1/2/3/4 four channels for option.
2. REC Mode:There are AUTO/SCHEDULE/MANUAL/STOP,When user select
“AUTO”,Device will auto record after it power on;When user select”Schedule”,set
relevant schedule in the schedule setting.When user select”Manual”,Press”record”to
start recording,press “stop”to stop.When a channel select “Stop”,then it will not start
recording not matter what happen.
3.Resolution,Image Quality:These are recording parameter.User can set different recording
resolution(D1/HD1/CIF),Pal(1-25),NTSC(1-30) options for different
resolution.Different Imange Quality for option(1-3).D1 is the highest
resolution,0 is the best image qualtiy.
4.Sound Recording,Preview,Video Loss:When sound recording function open up,the video
will be phonic;when the function shut,the video file will have only image
not sound;When preview function open up,the video in this channel will be
showed in the channel sreen,when the function shut,the channel screen will
show no video.When the Video Loss funtion open up,then,it will
show”Video Loss”in this channel screen when the video lose.
5.Sub-Streaming:This the video parameter for network transmission.When it open up,there
will be a setting buttom to set the parameter behine.Every channel could
HDD Mobile DVR Manual
版本号 20101210 22
set different video resolution for network transmission.Different
resolution(HD1/CIF/QCIF),Different frame per second(1-25),Different
image quality(0-3);HD1 is the highest resolution,0 is the best image
quality.
6.Copy current parameter:When user need to set the parameter of several channels or all
channels,can set one channel first,and then,input the relevant channel
number or all channel to copy the parameter to them.Optional channel :
1-4channels,all channels
5.2.4 Record Setting
As Picture 15
Picture 15:Record Set
HDD Mobile DVR Manual
版本号 20101210 23
Picture 16:Record Plan
Instruction:
1.Output Version:PAL/NTSC for option.Choose the same version with Input version.
2.Recording Schedule:After selected”Schedule”in Recording Mode,user need to set the schedule
here.Select “Enter”to enter the setting screen,as picutre 16.There are two period schedule for
setting.If the recording schedule for everyday one week are the same,user could set the time in
“everyday”,and choose the relevant recording type(Normal/Event/Alarm).It will begin
recording if fufill the recording type.If everyday a week has different recording schedule,user
could set two schedule for each day.
3. Alarm Record Set:Select this column,press “enter”to enter the setting window.
Alarm output time:15s/30s/45s/60s for option.
Alarm pre-record:It will pre-record a period of time before alarm according to the setting
time(1min-60min).
Alarm recording delay:After alarm stop,it will still record a period time according to this
setting(1min-30min)
4 Event Record:Setting way is the same with alarm record setting.
5.Others:Auto overlay.When this function open up,the current new video will overlay the earliest
recording when the HD is full to make sure the HD space is enough to continue recording.If this
function shut,the devise will stop recording after the HD full.
Time Period:The time period of each video.User can choose15/30/45/60min,as each package
time.
HDD Mobile DVR Manual
版本号 20101210 24
Alarm file lock:The storage time extension for alarm files.Within the protection time,even the
HD is full,the alarm files will not be overlayed.Press enter to select 5/7/10/15 days.
5. Recording Type:Including I frame/Normal.I fps means,the devise will only record I
fram,Normal means recording all.
6. Buzzer Switch: With buzzer ON , when it alarm , you can hear the voice ; if it „s OFF ,
No any noice.
7. Event record export: Turn on it , all the events record will be exported to the stoage
Device ,
8. Export device: Pre USB/Postpositive USB/HD, user can select thestorage device of export
record.
9. Mirror Record : Turn on it , there will be mirror record and kept in external HDD or other
storage device ; turn off it , no any mirror record.
5.2.5 Network Setting
As picture 17, it including 3G setting、WIFI setting 、center setting.
Picture 17 :Network Set
5.2.5.1 Local network
As picture 18:
HDD Mobile DVR Manual
版本号 20101210 25
Picture 18: Lan Set
Instructions:
This module don't used on car DVR.
5.2.5.2 3G Setting
When DVR connect network by 3G,set up network in this step ,as picture 19:
Picture 19: 3G Set
Instructions:
1. Insert related SIM card according to the communication configuration (WCDMA and
EVDO) of the device.
HDD Mobile DVR Manual
版本号 20101210 26
2. Edit the following information on 3G setting interface:
a. Set WIRELESS as ON;
b. Select the communication type on TYPE ,if the device support WCDMA type,then select
WCDMA ; it it support EVDO ,then select EVDO ,press ENTER to select it ;
c. Default APN and CENTER NUM,input the user name and password of your SIM
card ,keep it blank if no, press ENTER to access to software interface and set up it .
3. Press INFO on remote control , you will see the related information of 3G
communication,if need reported into CMS server, then input the CMS center IP or domain
name address and port No in center IP of center setting.
5.2.5.3 WIFI Setting
As picture 20:
Picture 20: WIFI Set
Instructions:
1.Insert WIFI antenna;
2.Edit the following information on WIFI setting interface:
a. Set up the ENABLE and ENCRIPTION as ON .AUTH mode including WPA,WPA-PSK,
OPEN and SHARE . ENCRIPT TYPE including TKIP and AES; The AUTH MODE is not act at
present, so just select OPEN (no need authentication);Select WEP on ENCRIPT TYPE . Press
ENTER to set it up.
HDD Mobile DVR Manual
版本号 20101210 27
b. Input SSID and password , set up IP、NETMASK and GATEWAY. Press ENTER to set up
SSID and password; When set up IP、NETMASK and GATEWAY, select the part that need
modification,and input figure.
c. Check WIFI connection status in sytem information interface,if WIFI singal >-60 d B, it
means WIFI has connected with network.If need reported to CMS server, then input the CMS
center IP or domain name address and port No in center IP of center setting.
5.2.5.4 Center Setting
As picture 21:
Picture 21:Center Set
Instructions:
1.Server Address: IP/ DOMAIN setting, if select IP,input IP of CMS center server; if select
DOMAIN setting ,input DOMAIN address in the address line;
2. Control Port: The port No seted up as gateway is usually 8501; When changing server IP、
control port , just select the line and press No keys.
5.2.6 Alarm Setting
Alarm setting including IO setting 、speed setting、accelerate setting、temperature setting ,
HDD Mobile DVR Manual
版本号 20101210 28
as picture 22:
Picture 22:Alarm Set
5.2.6.1 IO setting
As picture 23:
Picture 23: Lo Set
Instructions:
1. IO : There are 8 IO interface( default as IO01-IO08), select the IO that you need
HDD Mobile DVR Manual
版本号 20101210 29
setting in IO line;
2.Name : Definite the IO name according to different interface when install DVR;
3.Enable:Set ENABLE as ON to start up the IO;
4.Electronic Level:With ENABLE ON ,user can confirm the level of causing alarm, < 4v is
low level ,> 4v is high level;
5.Type: User can delimit the IO is alarm or event;
6.Record:ON/OFF option. With ON status , if the recorded vedio type is defined
In plan record ,it will be recorded when contact the IO ; with OFF status , no record even
contact the IO.
7.Output Select:There are two alarm output interface(output 1 and output 2),user can select
output interface of every IO but not output.
8.Output Time:User can delimit the contact duration time of the IO
9.Lock: Select lock , then the record of this IO will be locked , it can be deleted or added
only unlocked it or over the alarm record protection time ; If unlocked it ,it „s
the same as common record.
5.2.6.2 Speed Setting
As picture 24:
s
Picture 24: Speed Set
Instructions:
HDD Mobile DVR Manual
版本号 20101210 30
1.Speed Source :GPS/ vehicle setup option in Speed Source, press ENTER to select it . If
select GPS ,the speed can be tranmitted into device only with GPS module and GPS singal exist;
If select vehicle setup .pls connect the peripheral sensor to count speed ratio ,then input it into P/S
line and keep it ,you‟ll see the vehicle real-time speed in CHECK line.
2.Speed Unit:User can select different speed unit KPH and MPH, then the speed unit of
TERESHOLD is the same as this unit.
3.Enable :Turn on ENABLE to start this functiom,or else , it lower or higher speed alarm won‟ t
act.
4.Tereshold: User can set up the alarm speed ,it will alarm when the speed is lower or higher
than the tereshold of alarm speed .
5.Record: User can self-define it „s event or alarm ,if the recorded vedio type has been seted
up in plan record , then it will start to record it after alarm
6.Lock: Select lock ,record of this IO will be locked , it can be deleted or covered only when it
„s unlocked or over alarm record protection time ; or else , it „s the same as common record .
5.2.6.3 Accelerate Setting
As picture 25:
Picture 25: Accelerate Set
HDD Mobile DVR Manual
版本号 20101210 31
5.2.6.4 Termperature Setting
As picture 26
Picture 26: Temperature Set
Instruction
1.Temperature Unit :Select the Temperature Unit (℃and ℉)as required ,then the TERESHOLD
unit will be the same as the selected one .
2.Enable: Set ENABLE as ON to start the function ,if it‟ s OFF , the low and high temperature
the alarm function won‟t act .
3. TETESHOLD:User can set up the alarm termperature here , when the termperature is lower
or higher than TERESHOLD , it will alarm.
4.Record:. User can self-define it „s event or alarm ,if the recorded vedio type has been seted up
in plan record , then it will start to record it after alarm
5.Lock: when select LOCK , the record of this IO will be locked ,it can be deleted or covered
only when it‟s unlocked or over alarm record protection
Time ; If it‟s unlocked, it‟s the same as commin record .
5.2.7 Display Setting
As picture 27:
HDD Mobile DVR Manual
版本号 20101210 32
Picture 27: Display Set
Instructions:
The information displayed is mainly time、GPS、speed、IO 、WIFI singal、3G singal、
connection status. Select the items ,then press ENTER to operate.
1.Display: Turn on it , you can see the corresponding information on sreen , if turn off it , no
any information.
2.Record:It mainly control if the information is added on the record ,if turn on it , you can see
the corresponding information on vedio record when playback .
5.3 Record Search
Search and playback the record files, as picture 28:
HDD Mobile DVR Manual
版本号 20101210 33
Picture 28: Record Search
Picture 29:Record Search Result
Notice:
Greed numbers show recording was executed at the date. Put into the date, start time, the end
time, the channel, record type , then search the files you need.
The record types include :Starting up record, Alarm recorder, Even recorder and so on.
If there is not any record file searched according setting conditions, system will show: No
Search, please search again.
The picture 29 is the list of searching according to the conditions .
, , , mean move to last file, next file, last page, next page. Press play key to
HDD Mobile DVR Manual
版本号 20101210 34
playback the chose files.
【FWD】: Forward key. Press one time, the speed will increase to twice, press twice, the
speed will increase to double, it can be to fourfold.
【PAUSE/STEP】: Pause key
【REW】: Fast reverse key
【PLAY】: when in FWD, REW,PAUSE situation, press PLAY to recover normal play
situation.
5.4 Manage tool
Set user account, disk manage, upgrade, config manage, log search, abnormal
As picture 30.
Picture 30: Manage tool
5.4.1 User Account
Set user password and limits of authority, as picture 31 :
HDD Mobile DVR Manual
版本号 20101210 35
Picture 31:User Account
Picture 32:User Set
Notice:
1. When the password enable is ON, please input password to log in system; When the
password enable is OFF, press【LOGIN】to go into system directly .
2. System user own all limits of authority , can manage normal user: ADD USER,
MODIFY USER, DELECT USER; and domestic user just has the limits
authorized by system administrator .
Choose the ADD button, press 【enter】go into interface, as picture 32 . Put into
HDD Mobile DVR Manual
版本号 20101210 36
user name , choose the user type (system user /domestic consumer), set password,
authorize limits , then click SAVE . Modify or delete user in the user account
interface .
5.4.2 Disk Manage
Disk manage as picture 33:
Picture 33: Disk Manage
Notice:
Select media HDD, click format ; then a prompt drums out , click SAVE to start format,
DVR System will be restart once format completed.
5.4.3 System upgrade
System upgrade as Picture 34 :
HDD Mobile DVR Manual
版本号 20101210 37
Picture 34: System Upgrade
Notice:
Choose the upgrade ( Firmware or single chip software), CURRENT VERSION shows
the current version information . There are two ways to upgrade system:
1.Put the software file into Usb Flash drive , then connect to MDVR, when the MDVR
starts, system will update software automatically .
2. Choose the upgrade Firmware or single chip software, then click UPGRADE.
Important notice: Don‟t cut power or restart system when system is upgrading.
5.4.4 Config Manage
Config manage as picture 35 :
HDD Mobile DVR Manual
版本号 20101210 38
Picture 35:Configuration Manage
Note:
1. When execute export configuration, The configuration information will save in HDD.
2. Press New configuration import into information for the same setting MDVR.
3, Press Reset setting , then the MDVR will recover the setting at the time when leave factory.
System will restart when recover default configuration.
5.4.5 Log search
Log search as Picture 36:
HDD Mobile DVR Manual
版本号 20101210 39
Picture 36: Log Search
Picture 37:Log Search Result
。
Notice:
Greed numbers show recording was executed at the date. Put into the date, start time, the end
time by remote control, then search the files you need.
The log types include : alarm ,event, operation, system.If there is not any record file searched
according setting conditions, system will show: No
Search, please search again.
HDD Mobile DVR Manual
版本号 20101210 40
The picture 37 is the list of searching according to the conditions .
, , , mean move to last file, next file, last page, next page. Press play key to
playback the chose files.
5.4.6 Abnormal manage
Abnormal manage as picture 38 :
Picture 38:Abnormal Manage
Notice:
There are for abnormal types , so four types abnormal disposes : BUZZER ALARM,
CENTER LINK DISCONNECT,TRIGGER ALARM, REBOOT ALARM.
5.5 Peripheral
It „s mainly the management of PTZ and VGA, as picture 39:
HDD Mobile DVR Manual
版本号 20101210 41
Picture 39: Peripheral
5.5.1 VGA
Picture 40: VGA
Instruction:
When user need output HD vedio, connect the HD vedio output cable in CVBS&VGA
HDD Mobile DVR Manual
版本号 20101210 42
interface at the back of the device,then setup system display resolution,there are four selections
including 800*600,1024*768,1280*1024,1366*768.
5.5.2 PTZ
PTZ setup as picture 41:
Picture 41:PTZ Set
Instructions:
1.Channel: Select the channel No of the PTZ;
2.Protocol: PELCO-D and PELCO-P protocol;
3.Baud Rate:Including 1200/2400/4800/9600 four selections,user can select;
Different PTZ setting according to different baud rate;
4.Data Bit: Data bit is usually 8,choose 1-8;
5.Stop Bit: Stop bit is usually 1, choose 1 and 2;
6.Check: Check bit , choose none;
7.Address Code:Input the corresponding address with PTZ ;
8.Cable Connecting:Negtive connect with RS485-B,negtive connect with RS485-A.
9.Remote Control Operation:Setup , , , on menu guide, they are up、down、
left、right, “+”、“-”of 【ZOOM】 is zoom in and zoom out function key.
【Focus】 adjust focus distance.【IRIS-】 adjust IR light,【PRESET】i
preset 【RECALL】 call preset 【BRUSH】refresh the interface.
Notes:After user setup the parameter of PTZ,select the channel that connect with PTZ, then
use the remote control to control PTZ, for example,PTZ is connected on channel 2,
then shift to channel 2 to control it .
HDD Mobile DVR Manual
版本号 20101210 43
5.6 System Information
Picture 42:System Info
Instructions:
Access to system info interface by system info module of software or press”info”key on
remote control, it mainly show some basic info of system,such as hardware version info、GPS、
SIM info、3G info、WIFI connection condition 、alarm info、hard disk storage condition.
top related