hd-3 electronic drum kit...hd-3 electronic drum kit assembly guide easy assembly guide if you have...
Post on 24-Jan-2021
6 Views
Preview:
TRANSCRIPT
HD-3 Electronic Drum Kit
ASSEMBLY GUIDE
EASY ASSEMBLY GUIDEIF YOU HAVE ANY QUESTIONS CALL OUR TOLL FREE HELPLINE
888-998-9848DO NOT RETURN TO THE STORE
1. Carefully unpack all contents of box
Not Pictured:(1) Labeled Wiring Harness(1) Pair Drumsticks(1) Drumstick HolderVelcro Strips
RID
EC
RA
SH
HH
HH
CM
AS
TE
R O
UT
TO
M2
TO
M1
SN
AR
EA
UX
INT
OM
3K
ICK
TO TOM1 TO TOM2
TO TOM3
TO RIDE
TO KICK
US
B
TO
HO
ST
TO CRASH
TO HH
TO SNARE
Drum Frame
Cymbal Arms
Hi-Hat Control Pedal Kick Pedal
SnareToms
Cymbals
Sound Module
UNBOXING YOUR DRUM KIT
(1) Hi-Hat Cymbal
(1) Crash Cymbal(1) Ride Cymbal
(1) Sound Module(1) Snare Drum
(3) Tom Drums
Kick PedalHi-Hat Control Pedal
Drum Kit Components
DRUM KIT ASSEMBLY
2. Attach the cymbal arms to the drum frame indicated positions .
3. Attach the cymbals to the cymbal arms as shown.
4. Align the holes in Snare Drum Pad and the three Tom Drum Pads and insert them into the pole on the Drum Frame as shown.
5. Attach the Drum Pads in the positions hown below.
DRUM KIT ASSEMBLY (CON’T)
6. Insert the rod of sound module stand into the Drum Frame clamp as shown, then tight-en.
7. Please put Hi-hat control pedal on the left and Kick pedal on the right.
RIDE CRASH HH HHC MASTER OUT
TOM2 TOM1 SNARE AUX INTOM3 KICK
USB TO HOST
TOM1 TOM2
TOM3
RIDE
KICK
CRASH
Hi-hat
SNARE
Hi-hat control
RIDE CRASH Hi-hat Hi-hat control
TOM1TOM2TOM3 SNARE KICK
DRUM KIT WIRING DIAGRAM8. Connect the wiring harness to the interface at the bottom of the drum sound module, then connect the labeled cables to their corresponding drum pads, cymbals and pedals, as show below.
Drum Module Connector Panel
10. Attach the included power supply adapter and the headphones to drum sound module connector panel.
AC POWER
POWER
ON OFF
PHONES
DC 9V
17 18
9. Extend the drum throne legs and secure the legs with the wingut. (fig 1) Fasten the drum throne stool to the height adjustment rod and secure the stool with the wingnut. (fig 2) Set up the drum throne at the desired height as shown below. (fig 3)
DRUM THRONE ASSEMBLY
(fig. 3) (fig. 2) (fig. 1)
Virgin Musical Instrument CompanyPO BOX 2908
LA MESA, CA 91943info@virginmusicalinstruments.comwww.virginmusicalinstruments.com
Virgin (VMI) is the Parent Company of Hitman Drums
If you have any questions about your drum kit please contact us toll free 888-998-9848
top related