have a nice day !! !

Intro to LinMot

HAVE A NICE DAY !!!

Intro to LinMot

A Presentation byLinMot, Inc.

Intro to LinMot # 3

Some LinMot BasicsLinMot based near Zurich, Switzerland. LinMot’s parent company is NTI AG. LinMot was started in 1993 to bring their Linear Motor Technology to the global marketplace.Here in the US, LinMot’s North American Office is located in Elkhorn, WI.Most products are stocked in Elkhorn, WI with extensive stock in Switzerland.Because we use FedEx exclusively, we can get product from Switzerland to the customer in 72 hours or less - better than a lot of domestic companies!

Intro to LinMot # 4

LinMot Products

Linear Motors, Mounting Flanges, Guided Actuators, Servo Controllers, Power Supplies and Cables

Intro to LinMot # 5

Linear Motors

Intro to LinMot # 6

What Makes ‘Em Great!

Strokes up to 60” (5 feet) ± 0.002” repeatabilityForces up to 200 pounds peakSpeeds up to 120 inches per secondAccelerations up to 40 g’sLifetime of up to 2 BILLION CYCLESRugged construction (wash down)Temperature range of 140°F to -40°F (60°C to -40°C). Great for freezers where pneumatics freeze up!

Intro to LinMot # 7

Even Hollow Sliders

Intro to LinMot # 8

Strokes Up To 5 feet

On the short end, we have customers using these with a stroke of 0.040” (1mm). They happen to be moving at 120 Hz!If it’s a short horizontal move, the slider will support itself and a light load.For longer moves, or where there’s a substantial mass that needs to be supported, we have guided actuators.If it’s a long horizontal move, the load needs to be supported.

Intro to LinMot # 9

These Are Guided Actuators

Strokes to 16” (420mm)Forces to 131 poundsOil-Lite Bushings or Recirculating Ball Bearings

Use bushings for wet/dirty environment or fast accel. Use ball bearings for longer life in clean environments.

Intro to LinMot # 10

These are B-Guides

Oil-Lite Bushings or Recirculating Ball Bearings.These require “High Clearance” sliders.

Intro to LinMot # 11

These are G-Guides

Strokes up to 5½ feet.Recirculating Ball Bearings only.

Intro to LinMot # 12

G-Guide Application

Comes as a “kit” – some assembly required.Customer provides cable track.

Intro to LinMot # 13

Long Moves or Heavy Loads

The load (and the slider) need to be supported.

Intro to LinMot # 14

You Don’t Have To Move the Slider

Some examples of “Moving Stator” configurations.LinMot provides kits for mounting the slider properly.

Intro to LinMot # 15

Where Are LinMot Motors Used?

PackagingMaterial HandlingMedicalOther

Let’s look in detail.

Intro to LinMot # 16

Packaging

Label applicationStampingDispensing Especially if wash down is required

WindingCarton assemblyProduct insertionGluing

Intro to LinMot # 17

Material Handling

Pick and placeReject product bumpoffCuttingStackingProduct compressionMachine vision inspectionSorting

Intro to LinMot # 18

Medical

Liquid dispensingSample handling

Intro to LinMot # 19

Other

Product testing It’s sometimes hard to find components that

last as long as what’s being tested. LinMot does!

Intro to LinMot # 20

Some Not-So-Good Applications

Metal Machining Ferrous metal chips stick to the magnetic

slider

High temperature (above 140°F/60°C)Where there’s sticky stuff Especially if it only gets sticky when the

motor is off, like when it dries or cools (chocolate is a good example)

Intro to LinMot # 21

That’s It!!

Any other questions?If you haven’t seen it already, let’s watch a movie!

The End(of this one, anyway)