gurit product catalogue sea / nz / au product catalogue 3 gpc- apac-29-1117 contents prepreg &...
Post on 09-Apr-2018
236 Views
Preview:
TRANSCRIPT
GURIT PRODUCT CATALOGUEAustralia, New Zealand and South-East Asia
info-nz@gurit.com
www.gurit.comVersion 29 - November 2017
Cover photo credits: ©Tim Wright, Cheoy Lee Shipyards Ltd.
GuritSEA/NZ/AUProductCatalogue 2 GPC-APAC-29-1117
Introduction to Gurit Gurit is renowned as one of the leading global manufacturers and suppliers of composite materials
and engineering. Gurit's unique approach integrates structural design, materials science and process
engineering to offer a complete turnkey composite solution.
Gurit offers a combination of innovative, durable, industry-leading composite products with unrivalled
in-house technical expertise, ensuring best-in-class operation wherever it is applied. The versatility
and durability of Gurit's products and in-depth engineering knowledge means every project delivers a
performance that is finely tuned to individual specifications and needs. Gurit's long history of
development and innovation has increased part quality and durability while continual streamlining of
processes have improved productivity and reduced costs.
Gurit offers an impressive portfolio of standardised and customised products suitable for a full range of
requirements, including a comprehensive range of tooling, reinforcement and prepreg materials.
Gurit's patent-approved, award-winning SPRINT™ technology offers lightweight, cost-effective
solutions for a number of applications, reducing production time and cost by up to 60%, and weight by
up to 40%. Gurit® Corecell™ is a leading structural foam core material, which has become widely
accepted for the construction of large, high performance structures.
How to use this Product Catalogue This catalogue has been produced to provide information on our product portfolio. Each individual
product code is categorised as one of the following:
Gurit is also well served by a network of representatives, who hold stocks of Gurit products locally,
and who can also act as a local point of contact for technical and sales information. A list of these
representatives is given at the end of this publication.
Brief descriptions of each product and product group are given throughout to facilitate product
selection, with full information on any product obtainable from the relevant technical datasheet. These
are available on the Gurit website, www.gurit.com, or by contacting customer support. Contact details
for customer support are given at the end of this publication.
The product catalogue structure is given in the contents page. For placing orders, contact details can
be found at the end of this product catalogue. Written orders may be provided by fax, letter or email.
Please use the order codes provided to ensure that you obtain the correct products.
Some Gurit products are subject to export control restrictions and destinations subject to
trade restrictions. Please contact your local Gurit Customer Support office for details.
AU/NZ = stocked product in Australia and New Zealand
AU = stocked in Australia only
NZ = stocked in New Zealand only
SPECIALIST = please contact your local customer support team for product availability
GuritSEA/NZ/AUProductCatalogue 3 GPC-APAC-29-1117
Contents Prepreg & SPRINT™ Materials .............................................................................................................................. 4Fibre Definitions of HEC, IMC, HMC and UHMC.........................................................................................................................................5
Low Temperature Curing Prepreg & SPRINT™ Materials.........................................................................................................................6
Performance Prepreg & SPRINT™ Materials..............................................................................................................................................8
High Performance Prepreg Materials...........................................................................................................................................................13
Aerospace Qualified Prepreg Materials.......................................................................................................................................................17
Industrial Prepreg & SPRINT™ Materials...................................................................................................................................................18
Prepreg & SPRINT™ Ancillaries..................................................................................................................................................................22
Fire Retardant Materials ....................................................................................................................................... 26Fire Retardant Laminating Systems.............................................................................................................................................................27
Fire Retardant SPRINT™ Systems..............................................................................................................................................................27
Fire Retardant Prepreg Systems..................................................................................................................................................................28
Core Materials ....................................................................................................................................................... 29Introduction......................................................................................................................................................................................................29
Forms of Supply..............................................................................................................................................................................................30
Core Materials Range....................................................................................................................................................................................32
Nomex Honeycomb........................................................................................................................................................................................36
B³ Smartpac from Gurit..................................................................................................................................................................................38
Gurit Hi-Panels................................................................................................................................................................................................39
Adhesive Systems ................................................................................................................................................ 40Spabond Adhesives........................................................................................................................................................................................40
Liquid & Filled Systems ....................................................................................................................................... 44Laminating Systems.......................................................................................................................................................................................45
Infusion Systems.............................................................................................................................................................................................49
RTM System....................................................................................................................................................................................................51
Multi-Purpose Systems..................................................................................................................................................................................52
Code Selector..................................................................................................................................................................................................53
Filling and Fairing............................................................................................................................................................................................55
Tooling Products.............................................................................................................................................................................................56
Coatings...........................................................................................................................................................................................................58
Reinforcements ..................................................................................................................................................... 59Availability........................................................................................................................................................................................................60
Reinforcement Nomenclature.......................................................................................................................................................................60
E-Glass Products............................................................................................................................................................................................61
Chopped Strand Mat......................................................................................................................................................................................63
Carbon Products.............................................................................................................................................................................................63
Aramid Products..............................................................................................................................................................................................64
Ancillary Products ................................................................................................................................................ 65
Vacuum Consumables ......................................................................................................................................... 68
Gurit Structural Engineering ............................................................................................................................... 71
Contact .................................................................................................................................................................. 71Notes.................................................................................................................................................................................................................77
GuritSEA/NZ/AUProductCatalogue 4 GPC-APAC-29-1117
Prepreg & SPRINT™ Materials
Gurit’s long history supplying out of autoclave prepregs to the wind energy & marine
industries has allowed Gurit to lead the way by introducing the next generation of
prepregs, specifically designed to make large composite component manufacture
faster, easier and cheaper.
Prepreg Materials
Pre-impregnated materials (prepregs) are reinforcement fibres or fabrics into which a pre-
catalysed resin system has been impregnated by a machine. The resin systems in these
materials react very slowly at room temperature, giving rise to working times of many days or
months. Prepreg resins can only be fully cured by heating them to the prescribed cure
temperature. The accuracy of the machinery used to combine the fabric or fibre with the
resin ensures that laminates produced from prepregs have more consistent and higher fibre
contents than can be achieved by wet lay-up techniques. This allows the use of very tough,
strong resin systems that would be too high in viscosity to be impregnated by hand.
SPRINT™ Materials
SPRINT™ materials consist of a layer of fibre reinforcement either side of a pre-cast, pre-
catalysed resin film with a very lightweight tack film on one face. The material therefore has
the appearance of dry reinforcement, which has resin concealed at its centre. SPRINT™
materials are produced by a process that differs from conventional prepreg so that the fibres
in the reinforcements remain dry and un-impregnated by the resin. SPRINT™ materials are
laid up in a mould and vacuum bagged as for conventional prepreg. However, when the
vacuum is applied, the air transport properties of the dry reinforcement enable air trapped in
the fibre bundles and between layers to be easily removed. When the temperature is then
raised for the cure, the resin film softens and flows into the air-free reinforcement. The void
content of the resultant laminate is extremely low (typically 0-0.5%).
Fibre Definitions of HEC, IMC, HMC and UHMC ..................................................................................................... 5
Low Temperature Curing Prepreg & SPRINT™ Materials ....................................................................................... 6
Performance Prepreg & SPRINT™ Materials .......................................................................................................... 8
High Performance Prepreg Materials ..................................................................................................................... 13
Aerospace Qualified Prepreg Materials .................................................................................................................. 17
Industrial Prepreg & SPRINT™ Materials .............................................................................................................. 18
Prepreg & SPRINT™ Ancillaries ............................................................................................................................ 22
GuritSEA/NZ/AUProductCatalogue 5 GPC-APAC-29-1117
Fibre Definitions of HEC, IMC, HMC and UHMC
Fibre Description Strength (MPa) Modulus (GPa)
HEC High Elongation Carbon > 4000 227 to 257
IMC Intermediate Modulus Carbon > 4400 275 to 310
HMC High Modulus Carbon > 4300 365 to 405
UHMC Ultra High Modulus Carbon > 4000 420 to 455
Bespoke products are available for high-volume custom applications, where specific variants of width, resin content, fibre weight, tack levels and backers can be requested. For specific enquiries please contact your local customer support representative.
Gurit prepreg product formats are described as one of the following:
1PA – single release paper applied to one side only
1PO – single poly backer applied to one side only
POPA – one poly backer and one paper applied to either side
2DPE – two poly backers applied to each side
S/S – single sided SPRINT™ product
/XXXX – the 2nd reinforcement used in a double sided SPRINT™ e.g. /XC305
/CM – manufactured for cosmetic applications
GuritSEA/NZ/AUProductCatalogue 6 GPC-APAC-29-1117
Low Temperature Curing Prepreg & SPRINT™ Materials
Gurit’s range of low temperature curing prepregs have been developed to allow for the use of cost-effective tooling solutions in the construction of large components.
Product Selector
Format System Main Features Fastest Cure
Recommended Processing Method Max Tg1
Typical Applications
Prepreg SE 70 ¬ Curable at 70°C in thick sections
¬ Available in SPRINT™ and prepreg formats
¬ Range of compatible 70°C curing products
25 mins at 120°C
¬ Autoclave ¬ Press Moulding ¬ Vacuum Bagging
126°C
Sandwich structures with honeycomb, foam and balsa cores
SPRINT™ ST 70
SE 70 SE 70 is a family of hot melt, low temperature (70ºC) cure, epoxy prepreg systems. They have been developed for use in the construction of large components using low energy cure cycles, and have an out-life of 28 days at 21°C. Excellent properties can be achieved at this cure temperature, particularly compressive and interlaminar shear strengths.
ST 70 This is a low temperature (70ºC) cure, SPRINT™ system. Developed for use in the construction of large components using low energy cure cycles, it has an out-life of 21 days at 21°C. Excellent properties can be achieved at this cure temperature, particularly compressive and interlaminar shear strengths. ST 70 is DNV-GL approved for some glass and carbon products. Please contact your customer support representative for more information.
GuritAU/NZ/SEAProductCatalogue 7 GPC-APAC-29-1117
Code Selector Low Temperature Curing Prepreg SE 70
Reinf. Wt (gsm) Width (mm) Resin
Content (%) Format Length (lm) Quantity (m2) Order Code Availability
Unidirectional High Elongation Carbon (HEC)
HEC 200 400 37 POPA 150 60 PP53-2344 SPECIALIST
HEC 200 400 35 2DPE 200 80 PP53-5948 NZ
HEC 300 400 35 POPA 150 60 PP53-4165 SPECIALIST
HEC 300 400 35 2DPE 150 60 PP53-6104 NZ
Unidirectional High Modulus Carbon (HMC)
HMC 300 400 33 POPA 150 60 PP53-5783 SPECIALIST
Woven High Elongation Carbon (HEC)
RC200T 194 1270 40 1PO 60 76.2 PP13-3792 SPECIALIST
RC200T 194 1270 38 2DPE 50 63.5 PP13-5944 NZ
RC303T 300 1270 38 1PO 50 63.5 PP13-5541 SPECIALIST
RC416T 416 1270 40 1PO 40 50.8 PP13-4473 SPECIALIST
RC660T 660 1270 40 2DPE 25 31.75 PP13-6592 SPECIALIST
Stitched Multi-axial High Elongation Carbon (HEC)
XC411 410 1270 42 2DPE 40 50.8 PP23-5716 NZ
Stitched Multi-axial E-Glass
QE600 600 1200 42 1PO 25 30 PP21-6035 SPECIALIST
Peel Ply
NPP80 80 1000 50 1PA 100 100 PP15-4245 SPECIALIST
Resin Film
SE 70 Film 0 1270 100 No Carrier 150 190.5 PP00-5809 SPECIALIST
Low Temperature Curing SPRINT™ ST 70
Reinf. Wt
(gsm) Width (mm)
Resin Content (%) Format Tack
Film Length
(lm) Quantity
(m2) Order Code Availability
Woven High Elongation Carbon (HEC)
RC416T 416 1270 42 S/S No 100 127 SA13-4493 SPECIALIST
RC416T 416 1270 42 S/S MET STL No 100 127 ST13-7092 SPECIALIST
RC303T/RC303T 600 1270 42 F/S POPA Yes 15 19.05 SA13-4555 SPECIALIST
Stitched Multi-axial High Elongation Carbon (HEC)
XC411 410 1270 42 S/S No 25 31.75 SA23-4494 SPECIALIST
Stitched Multi-axial E-Glass
QE1200 1200 1200 42 S/S No 10 12 ST21-5613 SPECIALIST
AU/NZ = stocked product
AU = stocked in Australia only
NZ = stocked in New Zealand only
SPECIALIST = please contact your local customer support team for product availability
GuritAU/NZ/SEAProductCatalogue 8 GPC-APAC-29-1117
Performance Prepreg & SPRINT™ Materials
Gurit’s range of performance prepregs provide a good balance of mechanical thermal and performance with flexible curing options.
Product Selector
Format System Main Features Fastest Cure
Recommended Processing Method
Max Tg1
Typical Applications
Prepreg SE 84LV
¬ Versatile high-strength prepreg system
¬ Curable at 80°C in thick sections
60 mins at 120°C
¬ Autoclave ¬ Press Moulding ¬ Vacuum Bagging
115°C
High performance light-weight, high-stress structures – round the world yacht hulls and decks
SPRINT™ ST 94
¬ Drape and tackiness optimised for excellent handling
¬ Ideal for complex or vertical mouldings
¬ Excellent balance of mechanical performance and toughness
45 mins at 120°C
¬ Autoclave ¬ Press Moulding ¬ Vacuum Bagging
115°C
Ideal for large structures where heavyweight materials need to remain in the mould for long durations prior to curing
SPRINT™ ST 95
¬ Good balance of mechanical properties
¬ Dry fabric resin infusion enables efficient air evacuation
¬ Toughened – resistant to micro-cracking
60 mins at 120°C
¬ Autoclave ¬ Press Moulding ¬ Vacuum Bagging
125°C High volume industrial grade toughened SPRINT™ material
SE 84LV SE 84LV is an exceptionally versatile hot-melt, epoxy prepreg, it can be cured at temperatures as low as 80°C, or it can be used for faster moulding of components at 120°C. This is achieved with an extremely good out-life of up to 56 days at 21°C. SE 84LV is a tough system, and offers excellent mechanical properties on a wide variety of reinforcing fabrics and fibres.
ST 94 ST 94 is a toughened SPRINT™ system offering a good balance of mechanical properties. It comprises of a single layer of reinforcement fabric plied against a resin filmed paper. The resin film has a medium tack that makes it ideal for vertical surface applications. Although moderately tacky, ST 94 can be repositioned once in place without disturbing the underlying single SPRINT™ layers.
ST 95 ST 95 is a toughened SPRINT™ system that offers an extremely good balance of mechanical properties. With a minimum cure temperature of 85°C (with a suitable post-cure), it is ideal for structural components where improved performance and resistance to micro-cracking is desired. ST 95 resin matrix has good flow resistant characteristics that make it stable at room temperature (21°C). The product has a light tack on one side which aids placement in a mould tool. For details of cure schedules, please refer to data sheet.
GuritAU/NZ/SEAProductCatalogue 9 GPC-APAC-29-1117
Code Selector SE 84LV
Reinf. Wt (gsm) Width (mm) Resin
Content (%) Format Length (lm) Quantity (m2) Order Code Availability
Unidirectional High Elongation Carbon (HEC)
HEC 150 400 37 POPA 200 80 PC53-4161 AU
HEC 150 400 35 POPA 200 80 PC53-4407 SPECIALIST
HEC 200 400 37 POPA 200 80 PC53-4160 SPECIALIST
HEC 200 400 33 POPA 200 80 PC53-6183 SPECIALIST
HEC 300 400 35 POPA 150 60 PC53-4163 AU/NZ
HEC 300 400 32 POPA 150 60 PC53-5892 SPECIALIST
HEC 300 300 32 2DPE 150 60 PC53-7096 SPECIALIST
HEC 300 1200 37 2DPE 40 48 PC53-6473 SPECIALIST
HEC 450 400 35 POPA 100 40 PC53-4159 AU
Hybrid - Unidirectional High Elongation Carbon (HEC) with SA 80 Adhesive Film
HEC 300 400 35 SA80/250g 100 40 PC53-4853 SPECIALIST
HEC 300 400 35 SA80/300g 100 40 PC53-6070 SPECIALIST
Unidirectional Intermediate Modulus Carbon (IMC)
IMC 150 400 37 POPA 200 80 PC53-6178 SPECIALIST
IMC 150 400 35 POPA 150 60 PC53-1725 SPECIALIST
IMC 150 400 35 2DPE 200 80 PC53-6185 SPECIALIST
IMC 200 300 37 POPA 250 75 PC53-5635 SPECIALIST
IMC 300 150 35 POPA 150 22.5 PC53-7072 SPECIALIST
IMC 300 400 35 POPA 150 60 PC53-2306 SPECIALIST
IMC 300 400 35 2DPE 150 60 PC53-5748 SPECIALIST
IMC 450 400 35 2DPE 100 40 PC53-7003 SPECIALIST
Unidirectional High Modulus Carbon (HMC)
HMC 150 400 35 POPA 200 80 PC53-1807 SPECIALIST
HMC 150 400 32 2DPE 200 80 PC53-5581 SPECIALIST
HMC 200 400 33 2DPE 200 80 PC53-6634 SPECIALIST
HMC 300 400 37 2DPE 150 60 PC53-4579 SPECIALIST
HMC 300 400 33 POPA 150 60 PC53-5690 SPECIALIST
HMC(M40J) 300 300 32 2DPE 175 52.5 PC53-6389 SPECIALIST
HMC 300 1200 37 2DPE 40 48 PC53-6474 SPECIALIST
AU/NZ = stocked product
AU = stocked in Australia only
NZ = stocked in New Zealand only
SPECIALIST = please contact your local customer support team for product availability
For indicative purposes only, product availability subject to change at any time. Please contact Gurit Customer Service team for further information.
GuritAU/NZ/SEAProductCatalogue 10 GPC-APAC-29-1117
Code Selector Continued SE 84LV
Reinf. Wt (gsm) Width (mm) Resin
Content (%) Format Length (lm) Quantity (m2) Order Code Availability
Unidirectional High Modulus Carbon (HMC)
HMC 450 400 32 2DPE 100 40 PC53-7098 SPECIALIST
Woven High Elongation Carbon (HEC)
RC200T 200 1270 40 2DPE 50 63.5 PC13-5707 AU/NZ
RC200T 194 1270 42 1PO 50 63.5 PC13-2646 SPECIALIST
RC200P 200 1270 42 1PO 50 63.5 PC13-5801 SPECIALIST
RC303T 300 1270 42 1PO 35 44.45 PC13-2710 SPECIALIST
RC416T 416 1270 40 1PO 25 31.75 PC13-2682 SPECIALIST
RC660T 660 1270 43.5 2DPE 20 25.4 PC13-4849 SPECIALIST
RC660T 660 1270 40 1PO 20 25.4 PC13-2693 SPECIALIST
Stitched Multi-axial High Elongation Carbon (HEC)
XC150 154 1270 40 1PO 75 95.25 PC23-5252 SPECIALIST
XC305 305 1270 41 1PO 50 63.5 PC23-4362 SPECIALIST
XC305 305 1270 39 2DPE 50 63.5 PC23-5931 SPECIALIST
XC411 410 1270 40 2DPE 30 38.1 PC23-5708 AU/NZ
XC411 410 1270 40 1PO 30 38.1 PC23-1738 SPECIALIST
XC611 615 1270 40 2DPE 25 31.75 PC23-4891 SPECIALIST
Woven E-Glass and Aramid
RE50P 47 1270 45 POPA 100 127 PC11-6514 SPECIALIST
RE100H4 105 1200 38 2DPE 100 120 PC11-6686 SPECIALIST
RE165T 160 1270 56 POPA 60 76.2 PC11-6771 SPECIALIST
RE295 292 1240 39 1PO 50 62 PC11-4005 SPECIALIST
RE301H8D 300 1270 40 POPA 25 31.75 PC11-5901 SPECIALIST
REA390S 390 1200 39 1PO 50 60 PC11-1741 SPECIALIST
Stitched Multi-axial E-Glass
XE603 606 1250 36 1PO 25 31.25 PC21-1747 SPECIALIST
XE905 942 1270 35 1PO 15 19.05 PC21-1748 SPECIALIST
QE1203 1203 1270 35 2DPE 100 127 PC21-1749 SPECIALIST
Peel Ply
NPP80 80 1000 50 1PA 100 100 PC15-1744 NZ
AU/NZ = stocked product
AU = stocked in Australia only
NZ = stocked in New Zealand only
SPECIALIST = please contact your local customer support team for product availability
For indicative purposes only, product availability subject to change at any time. Please contact Gurit Customer Service team for further information.
GuritAU/NZ/SEAProductCatalogue 11 GPC-APAC-29-1117
Performance Single Sided SPRINT™
ST 94
Reinf. Wt (gsm)
Width (mm)
Resin Content (%) Format Tack
Film Length
(lm) Quantity
(m2) Order Code Availability
Woven High Elongation Carbon (HEC)
RC200T 194 1270 42 S/S No 100 127 SR13-6001 SPECIALIST
RC200T 194 1270 42 S/S No 50 63.5 SR13-2880 SPECIALIST
RC303T 300 1270 42 S/S No 30 38.1 SR13-2845 SPECIALIST
RC303T 300 1270 38 S/S No 25 31.75 SR13-5693 SPECIALIST
RC416T 416 1270 42 S/S No 100 127 SR13-3550 SPECIALIST
RC416T 416 1270 38 S/S No 25 31.75 SR13-5694 SPECIALIST
RC660T 660 1270 42 S/S No 47 59.69 SR13-5350 SPECIALIST
RC660T 660 1270 42 S/S No 18 22.86 SR13-3109 SPECIALIST
Stitched Multi-axial High Elongation Carbon (HEC)
XC305 305 1270 42 S/S No 100 127 SR23-6829 SPECIALIST
XC411 410 1270 42 S/S No 25 31.75 SR23-3134 SPECIALIST
XC411 410 1270 42 S/S No 100 127 SR23-3134L SPECIALIST
XC611 615 1270 40 S/S No 125 158.75 SR23-5358 SPECIALIST
XC611 615 1270 42 S/S No 20 25.4 SR23-7126 SPECIALIST
QC800 800 1270 40 S/S No 49 62.23 SR23-6910 SPECIALIST
Woven E-Glass
RE301H8 300 1270 35 S/S No 25 31.75 SR11-5877 SPECIALIST
RE400T 390 1250 52 S/S No 25 31.25 SR11-5820 SPECIALIST
RE400T 390 1250 35 S/S No 25 31.25 SR11-7002 SPECIALIST
WRE581T 580 1250 41 S/S No 25 31.25 SR11-6932 SPECIALIST
WRE581T 580 1250 33 S/S No 25 31.25 SR11-3219 SPECIALIST
WRE850T 850 1250 35 S/S No 16 20 SR11-5431 SPECIALIST
Stitched Multi-axial Glass and Aramid
XA450 465 1270 46 S/S No 20 25.4 SR22-5298 SPECIALIST
XE603 606 1255 35 S/S No 60 75.3 SR21-7062 SPECIALIST
XE603 606 1255 48 S/S No 150 188.25 SR21-4558 SPECIALIST
XE603 606 1255 35 S/S No 60 75.3 SA21-2748 SPECIALIST
XE905 942 1270 36 S/S No 49 62.23 SR21-5896 SPECIALIST
QE600 600 1200 33 S/S No 50 60 SR21-2518L SPECIALIST
QE1200 1200 1200 41 S/S No 50 60 SR21-3244L SPECIALIST
QE1200 1200 1200 32 S/S No 50 60 SR21-2424L SPECIALIST
Resin Film
ST 94 Film 0 1160 100 Resin Film No 100 116 SR00-6124 SPECIALIST
GuritAU/NZ/SEAProductCatalogue 12 GPC-APAC-29-1117
Performance Double Sided SPRINT™
ST 95
Reinf. Wt
(gsm)
Width (mm)
Resin Content
(%) Format Tack
Film Length
(lm) Quantity
(m2) Order Code Availability
Woven High Elongation Carbon (HEC)
RC303T/RC303T 600 1270 51 F/S Yes 15 19.05 SL13-2878 SPECIALIST
RC416T/XC305 721 1270 56 F/S Yes 13 16.51 SL23-7000 SPECIALIST
RC416T/XC305 721 1270 52 F/S Yes 13 16.51 SL23-4384 SPECIALIST
RC416T/XC305 721 1270 42 F/S POPA Yes 100 127 SL23-6509 SPECIALIST
RC416T/XC411 826 1270 52 F/S POPA Yes 100 127 SL23-6511 SPECIALIST
RC416T/XC411 826 1270 42 POPA Yes 100 127 SL23-6964 SPECIALIST
RC416T/XA450A 881 1270 48 F/S Yes 12.5 15.875 SL22-3775 SPECIALIST
Stitched Multi-axial High Elongation Carbon (HEC)
+45C2/-45C2 422 1270 42 F/S POPA No 30 38.1 SL43-2057 SPECIALIST
+45E3/-45E3 600 1270 42 POPA Yes 18 22.86 SL41-3199 SPECIALIST
Stitched Multi-axial E-Glass
RE301/RE301 592 1270 36 F/S POPA Yes 15 19.05 SL11-2891 SPECIALIST
RA320/RA320 640 1270 45 F/S POPA Yes 15 19.05 SL12-5300 SPECIALIST
WRE581T/ WRE581T 1160 1250 48 F/S POPA Yes 48 60 SL11-7095 SPECIALIST
WRE581T/ WRE581T 1160 1250 41 F/S POPA Yes 100 125 SL11-2560L SPECIALIST
WRE581T/ WRE581T 1160 1250 41 F/S POPA Yes 10 12.5 SL11-2560 SPECIALIST
AU/NZ = stocked product
AU = stocked in Australia only
NZ = stocked in New Zealand only
SPECIALIST = please contact your local customer support team for product availability
For indicative purposes only, product availability subject to change at any time. Please contact Gurit Customer Service team for further information.
GuritAU/NZ/SEAProductCatalogue 13 GPC-APAC-29-1117
High Performance Prepreg Materials
Gurit’s range of high performance prepregs offer exceptional benefits for a wide range of applications from rapid component manufacture to high-end cosmetic finishes.
Product Selector
Format System Main Features Fastest Cure
Recommended Processing Method Max Tg1
Typical Applications
SPRINT ST110 ¬ Car Body Panel
System SPRINT Resin
30 mins at 130°C
¬ Autoclave ¬ Vacuum Bag 115°C
Body and closure panels for automotive applications
Prepreg SC 110(T2)
¬ White spot free high clarity resin for cosmetic parts
¬ Versatile, high strength prepreg resin system
¬ Flexible cure as low as 85°C
20 mins at 150°C
¬ Autoclave ¬ Press Moulding 125°C
Ideal for high visual quality components without white-wash or white spots
Prepreg SC 160
¬ Class leading resin clarity
¬ High temperature performance
15 mins at 160°C
¬ Autoclave ¬ Press Moulding 180°C
Suitable for use in high temperature applications
Prepreg SE 84 Nano
¬ Nano-technology for outstanding mechanicals
¬ Benefits from attributes of SE84LV
60 mins at 120°C
¬ Autoclave ¬ Press Moulding ¬ Vacuum Bagging
140°C
High compressive property application e.g. very high performance yacht masts and foils
Prepreg Smartcure™
¬ Rapid cure in less than 5 minutes
¬ Ideal for Hot-in Hot-out press moulding manufacture
5 mins at 150°C ¬ Press Moulding 175°C
High volume component manufacture.
ST 110 for Car Body SPRINT™ (CBS) Structural ST 110 is used to form a multi layered material referred to as CBS Car Body SPRINT. It is used alongside a suitable surfacing film (SF80, SF80FROBL or SF96) and SY110 Syntactic Core to build up a CBS panel. The woven carbon and glass reinforcements can be used to lay up various panel combinations to suit the required stiffness and weight targets needed.
For our range of surfacing films and syntactic core materials see Prepreg & SPRINT™ Ancillaries.
GuritAU/NZ/SEAProductCatalogue 14 GPC-APAC-29-1117
SC 110(T2) SC 110(T2) is ideally suited to achieve visual surface quality. This cosmetic grade prepreg utilize a high clarity, versatile, hot-melt epoxy resin formulation. This specifically developed, unique formulation produces truly white-wash-free parts resulting in increased production output and scrap cost savings of up to 20%. SC 110(T2) can be cured at temperatures as low as 80°C or even faster cures are achievable using press moulding technologies at temperatures up to 150°C. QUV SE Accelerated Weathering Test has revealed that Gurit SC 110(T2) carbon prepreg offers superior weathering performance compared with the current market range.
SC 160 SC 160 are the first choice for perfect visual surface quality. The cosmetic grade prepregs utilize a high clarity, versatile, hot-melt epoxy resin formulation. SC 160 can be cured at temperatures as low as 130°C or even faster cures are achievable using press moulding technologies at temperatures up to 160°C. SC 160 offers class leading resin clarity for a prepreg resin suitable for use in high temperature applications of up to 160°C.
SE 84 Nano SE 84 Nano is a high performance hot-melt epoxy prepreg. When vacuum bag moulded, SE 84 Nano has a 10% increase in compressive strength compared to SE 84LV through a combination of Gurit proprietary formulation technology and 3M™ Matrix Resin. This marriage of technology delivers a significant boost to mechanical properties with the cure and handling characteristics of SE 84LV.
Smartcure™ Press moulding is the most common production method in the automotive industry to increase production rates for structural and body panel applications to serial production levels. Gurit is assisting this growth by offering prepreg-based products suitable for various press moulding applications. The company has developed a range of prepregs which can be supplied in diverse reinforcement formats that will offer effective deposition rates.
Gurit Smartcure™ is your fastest option for high volume press moulding production of structural automotive components. Cycle times of 5 minutes combined with preforming capability at room temperature and reduced finishing efforts result in increased production output as well as time and cost savings per part. True hot in, hot out processing of the innovative epoxy resin prepregs at steady press temperature guarantees constant part quality and energy savings combined with a good surface finish that is suitable for direct painting with various paints.
GuritAU/NZ/SEAProductCatalogue 15 GPC-APAC-29-1117
Code Selector ST 110
ST 110
Reinf. Wt (gsm) Width (mm) Resin
Content (%) Format Length (lm) Quantity (m2) Order Code Availability
Woven High Elongation Carbon (HEC)
RC200T(C) 194 1270 42 S/S 50 63.5 SA13-6158 SPECIALIST
Woven E-Glass
RE400T 390 1250 42 S/S 50 62.5 SA11-6157 SPECIALIST
Cosmetic Prepreg
SC 110(T2)
Reinf. Wt (gsm) Width (mm) Resin
Content (%) Format Length (lm) Quantity (m2) Order Code Availability
Woven High Elongation Carbon (HEC)
RC200P 200 1270 40 2DPE/CM 50 63.5 PA13-6404 SPECIALIST
RC200T 194 1270 40 2DPE/CM 50 63.5 PA13-6860 AU/NZ
RC245T 245 1250 40 2DPE/CM 50 62.5 PA13-6355 SPECIALIST
RC380T 380 1250 40 2DPE 46 57.5 PA13-6425 SPECIALIST
RC400T 400 1270 40 2DPE/CM 25 31.75 PA13-6567 SPECIALIST
RC430P 430 1200 40 2DPE 25 30 PA13-6427 SPECIALIST
RC600T 600 1250 40 2DPE 25 31.3 PA13-6429 SPECIALIST
RC660T 660 1270 35 2DPE 20 25.4 PA13-6431 SPECIALIST
Black Pigmented (BL) Woven High Elongation Carbon (HEC)
RC200T 194 1270 40 POPA 50 63.5 PA13-6988 SPECIALIST
Stitched Multi-axial High Elongation Carbon (HEC)
XC305 305 1270 40 2DPE 50 63.5 PA23-6702 SPECIALIST
Stitched Multi-axial Glass
XE603 606 1255 35 2DPE 20 25.1 PA21-6465 SPECIALIST
SC 160
Reinf. Wt (gsm) Width (mm) Resin
Content (%) Format Length (lm) Quantity (m2) Order Code Availability
Woven High Elongation Carbon (HEC)
RC200P 200 1270 40 2DPE/CM 50 63.5 PA13-6444 SPECIALIST
RC200T 194 1270 40 2DPE/CM 50 63.5 PA13-7012 SPECIALIST
RC245T 245 1250 40 2DPE/CM 50 62.5 PA13-6343 SPECIALIST
RC380T 380 1250 40 2DPE 46 57.5 PA13-6412 SPECIALIST
RC660T 660 1270 35 2DPE 20 25.4 PA13-6451 SPECIALIST
AU/NZ = stocked product
AU = stocked in Australia only
NZ = stocked in New Zealand only
SPECIALIST = please contact your local customer support team for product availability
For indicative purposes only, product availability subject to change at any time. Please contact Gurit Customer Service team for further information.
GuritAU/NZ/SEAProductCatalogue 16 GPC-APAC-29-1117
High Compression Strength Prepreg
SE 84 Nano
Reinf. Wt (gsm) Width (mm) Resin
Content (%) Format Length (lm) Quantity (m2) Order Code Availability
Unidirectional Intermediate Modulus Carbon (IMC)
IMC 300 400 36 2DPE 150 60 PC53-6737 SPECIALIST
5 Minute Curing Prepreg
Smartcure
Reinf. Wt (gsm) Width (mm) Resin
Content (%) Format Length (lm) Quantity (m2) Order Code Availability
Unidirectional High Elongation Carbon (HEC)
HEC 195 1270 39 POPA 50 63.5 PA53-6489 SPECIALIST
HEC(TC35R) 195 1270 39 POPA 50 63.5 PA53-6857 SPECIALIST
Woven High Elongation Carbon (HEC)
RC200P 200 1270 42 POPA 50 63.5 PA13-6784 SPECIALIST
RC200T 194 1270 40 2DPE 50 63.5 PA13-6775 SPECIALIST
RC245T 245 1250 46 2DPE 50 62.5 PA13-6648 SPECIALIST
RC380T 380 1250 42 POPA 32 40 PA13-6630 SPECIALIST
AU/NZ = stocked product
AU = stocked in Australia only
NZ = stocked in New Zealand only
SPECIALIST = please contact your local customer support team for product availability
For indicative purposes only, product availability subject to change at any time. Please contact Gurit Customer Service team for further information.
GuritAU/NZ/SEAProductCatalogue 17 GPC-APAC-29-1117
Aerospace Qualified Prepreg Materials
Advanced Composite Materials for the Aerospace Industry
Gurit has developed a broad range of strong, light and fire-retardant aerospace materials which are ideally suited for interior or structural components such as passenger and cargo floor panels, cabin linings, ceiling panels, air ducts, plenums, overhead compartments, lavatories, galleys, bars, wardrobes, partitions, seats, flap track and belly fairings, winglets and fins, landing gear doors, trailing edges and brackets.
Gurit offers four resin chemistries:
Chemistry Description
Phenolic Phenolic based chemistry is well established within the aerospace and rail industries where ultimate fire retardant, low smoke emission and low smoke toxicity (FST) properties are required. Phenolic prepregs are therefore commonly used in interior aircraft components such as side walls and flooring.
Epoxy
Gurit has a range of fire-retardant epoxy systems suitable for applications where increased mechanical properties are required. They generally exhibit good flame spread properties and can be used in more structural components compared to phenolics such as flooring panels. Where the optimum blend of FST and mechanical properties is required, Gurit epoxy prepregs also can be co-cured with phenolic prepregs. This is an established approach to the manufacture of aerospace flooring sandwich panels.
Cyanate Ester
Cyanate ester prepregs provide excellent FST properties and can be used in thermally demanding applications due to their high glass transition temperatures (>200oC). Laminates constructed with cyanate ester prepregs demonstrate very low gas permeability and are volatile-free, resulting in low void and porous free components. This together with their excellent FST and high Tg properties make them ideal for air-conditioning ducting construction in aerospace applications.
Benzoxazine
Gurit’s Benzoxazine prepregs represent the next generation of fire-retardant chemistry where similar FST properties to phenolics are required. An advantage of Benzoxazine chemistry is that it is phenol and formaldehyde free meeting the latest environmental standards. Additionally, during cure, Benzoxazine prepregs are volatile-free resulting in low void and porous-free components, therefore eliminating costly reworking processes associated with the manufacture of phenolic-based prepreg components.
For further information on product availability contact your local Gurit sales office.
GuritAU/NZ/SEAProductCatalogue 18 GPC-APAC-29-1117
Industrial Prepreg & SPRINT™ Materials
Gurit’s range of high industrial prepreg products were developed for the cost-effective manufacture of very large structures such as wind turbine blades using heavyweight reinforcements and low-cost chemistry.
Product Selector
Format System Main Features Fastest Cure
Recommended Processing Method Max Tg1
Typical Applications
Prepreg Sparpreg™
¬ UD prepreg ideal for thick structural sections
¬ Excellent handling & processing properties – no de-bulk
¬ Fully compatible with Gurit SPRINT™ and prepreg products
45 mins at 120°C
¬ Autoclave ¬ Press Moulding ¬ Vacuum Bagging
125°C
High quality monolithic unidirectional Components that require fast single shot production in thick sections
Prepreg
WE 91-1 ¬ High tack epoxy prepreg 45 mins
at 120°C
¬ Autoclave ¬ Press Moulding ¬ Vacuum Bagging
125°C
Large Structural components such as wind turbine blade shells and shear webs WE 91-2 ¬ Medium tack epoxy
prepreg
Prepreg WE 92
¬ Medium tack epoxy prepreg
¬ Cost effective for large structures
45 mins at 120°C
¬ Autoclave ¬ Press Moulding ¬ Vacuum Bagging
125°C
Large Structural components such as wind turbine blade shells and shear webs
SPRINT™ WT 93
¬ Low tack SPRINT™ resin matrix
¬ Dry fabric enables efficient air evacuation
45 mins at 120°C
¬ Autoclave ¬ Press Moulding ¬ Vacuum Bagging
125°C
Large Structural components such as wind turbine blade shells, shear webs, spars and roots
Sparpreg
SparPreg™ is an advanced UD prepreg, developed to enable to economic manufacture of unidirectional spar caps for more demanding spar designs. SparPreg™ is specifically formulated to produce low void content unidirectional prepreg from vacuum bag only processing.
WE 91-1 / WE 91-2
The WE91 prepreg product range comprises of two tack variants; WE 91-1 high tack and WE 91-2 medium tack prepregs. WE 91 is a high flow epoxy prepreg ideally suited to structural composite component manufacture. It can be cured at temperatures as low as 85⁰C, but can also be used for the rapid manufacture of components through its 45-minute cure at 120°C.
GuritAU/NZ/SEAProductCatalogue 19 GPC-APAC-29-1117
All of this can be achieved together with an out-life of 60 days at 21°C. WE 91-2 is designed for vacuum bag processing and offers excellent mechanical performance on glass and carbon fibre reinforcements.
WE 92
WE 92 is a high flow epoxy prepreg ideally suited to the manufacture of thick sections. It can be cured at temperatures as low as 85°C, but can also be used for the rapid manufacture of components through its 45-minute cure at 120°C. All of this can be achieved together with an out-life of 60 days at 21°C.
WT 93
WT 93 is a SPRINT™ resin system that can be cured at temperatures as low as 85⁰C, but can also be used for the rapid manufacture of components through its 45-minute cure at 120⁰C. All of this can be achieved together with an out-life of 21 days at 21⁰C. WT 93 is designed for vacuum bag processing and offers excellent mechanical performance on glass and carbon fibre reinforcements.
Gurit’s innovative WT 93 SPRINT™ product range uses a high flow, low tack epoxy prepreg and is ideally suited to the manufacture of thick sections such as turbine blade roots or spars.
GuritAU/NZ/SEAProductCatalogue 20 GPC-APAC-29-1117
Code Selector
Sparpreg
Reinf. Wt (gsm) Width (mm) Resin
Content (%) Format Length (lm) Quantity (m2) Order Code Availability
Unidirectional High Elongation Carbon (HEC)
HEC 600 1240 34 2DPE 120 148.8 PA53-5995 SPECIALIST
HEC 600 400 34 2DPE 110 44 PA53-5513 SPECIALIST
HEC 600 300 34 2DPE 100 30 PA53-6685 SPECIALIST
Unidirectional E-Glass (EGL)
EGL 1600 900 32 2DPE 219 197.1 PA51-4994 SPECIALIST
Woven High Elongation Carbon (HEC)
RC660T 660 1270 40 2DPE 100 127 PA13-6399 SPECIALIST
WE 91-1
Reinf. Wt (gsm) Width (mm) Resin
Content (%) Format Length (lm) Quantity (m2) Order Code Availability
Unidirectional E-Glass (EGL)
EGL 1200 900 32 2DPE 307 276.3 PA51-3984 SPECIALIST
EGL 1500 1470 32 2DPE 243 357.21 PA51-3985 SPECIALIST
EGL 1500 970 32 2DPE 294 285.18 PA51-3987 SPECIALIST
EGL 1600 1000 32 2DPE 219 219 PA51-3989 SPECIALIST
Woven E-Glass
WRE600/UD90 608 200 35 2DPE 160 32 PA11-4326 SPECIALIST
Stitched Multi-axial E-Glass
XE603 604 1250 35 2DPE 390 487.5 PA21-3980 SPECIALIST
XE603 604 1250 50 2DPE 390 487.5 PA21-3981 SPECIALIST
Peel Ply
NPP80G 80 1200 50 S/S 100 120 SA15-5053 SPECIALIST NPP80 80 1200 50 S/S 100 120 SA15-4886 SPECIALIST
NPP80 80 1200 50 1PA 100 120 SA15-6090 SPECIALIST
NPP80 80 1000 50 S/S 50 50 SA15-3087 SPECIALIST
WE 91-2
Reinf. Wt (gsm) Width (mm) Resin
Content (%) Format Length (lm) Quantity (m2) Order Code Availability
Stitched Multi-axial E-Glass
XE1000 1014 1250 48 2DPE 248 310 PA21-6094 SPECIALIST
XE603 604 245 45 1PO 125 30.625 PA21-5420 SPECIALIST
XE603 600 1255 45 POPA 378 474.39 PA21-4096 SPECIALIST
AU/NZ = stocked product
AU = stocked in Australia only
NZ = stocked in New Zealand only
SPECIALIST = please contact your local customer support team for product availability
For indicative purposes only, product availability subject to change at any time. Please contact Gurit Customer Service team for further information.
GuritAU/NZ/SEAProductCatalogue 21 GPC-APAC-29-1117
WE 92
Reinf. Wt (gsm) Width (mm) Resin
Content (%) Format Length (lm) Quantity (m2) Order Code Availability
Stitched Multi-axial E-Glass
YE1200 1273 1260 43 2DPE 169 212.94 PA21-61601 SPECIALIST
WT 93
Reinf. Wt (gsm) Width (mm) Resin
Content (%) Format Length (lm) Quantity (m2) Order Code Availability
Stitched Multi-axial E-Glass
XE603 604 1255 35 S/S 105 131.775 SA21-5224 SPECIALIST
+45E3/-45E3 600 1270 35 1PO 250 317.5 SA41-4767R SPECIALIST
QE1174L 1173 1270 41 S/S 75 95.25 SA21-4390 SPECIALIST 1Includes 50g/m2 Fleece
AU/NZ = stocked product
AU = stocked in Australia only
NZ = stocked in New Zealand only
SPECIALIST = please contact your local customer support team for product availability
For indicative purposes only, product availability subject to change at any time. Please contact Gurit Customer Service team for further information.
GuritAU/NZ/SEAProductCatalogue 22 GPC-APAC-29-1117
Prepreg & SPRINT™ Ancillaries
To complement Gurit’s prepreg product range, Gurit also offers co-curable ancillary products including surfacing films, adhesive films, light-weight cores and intensifying pastes.
Product Selector
Format System Main Features Lowest Cure
Recommended Processing Method
Max Tg1
Typical Applications
Adhesive Film
SA 70 ¬ Highly toughened resin
matrix ¬ Consistent bond-line
thickness and weight ¬ High strain to failure,
high toughness ¬ Excellent handling and
no mixing required
16 hrs at 70°C
¬ Autoclave ¬ Press Moulding ¬ Vacuum Bagging
110°C
Co-cure with 70°C prepregs for core and high strength adhesive bonding applications
SA 80 12 hrs at 80°C 100°C
Co-cure with 80°C prepregs for core and high strength adhesive bonding applications
Surface Films
SF 70 ¬ Surface film to generate a resin rich surface
¬ Suitable for sub-surface applications
16 hrs at 70°C ¬ Autoclave
¬ Press Moulding ¬ Vacuum Bagging
90°C Co-cure with 70°C prepregs for resin rich surface
SF 80 12 hrs at 80°C 100°C
Co-cure with 80°C prepregs for resin rich surface
SF 96
¬ Pinhole free surface for easy preparation and application of paint system
10 hrs at 85°C
¬ Autoclave ¬ Press Moulding ¬ Vacuum Bagging
115°C
Co-cure with 85°C prepregs for resin rich surface ideal for sanding / priming prior to painting
SF 95VH ¬ Silicon carbide filled
film to generate very hard wearing surfaces
10 hrs at 85°C
¬ Autoclave ¬ Press Moulding ¬ Vacuum Bagging
130°C
Ideal for applications that require a highly toughened system such as car body undertrays
Intensifying Pastes
SP 11100
¬ Co-curable with prepreg systems
¬ Compatibility of handling and processing
¬ Ideal for core splicing and gap filling
16 hrs at 70°C
¬ Autoclave ¬ Press Moulding ¬ Vacuum Bagging
75°C Core splicing and gap filling with 70°C prepregs
SP 4832 12 hrs at 80°C 100°C
Low density, core splicing and gap filling with 80°C prepregs
SP 9435 12 hrs at 85°C 100°C
Core splicing, prevent bridging and gap filling with 85°C prepregs
Syntactic Core SY 110
¬ Lightweight drapable core material
¬ Co-curable with most Gurit Epoxy Prepregs & SPRINT™
¬ Fast lay-up times ¬ Available at 0.7mm
and 1.0mm thickness
12 hrs at 80°C ¬ Vacuum Bagging 110°C
Produces ultra-light and stiff panels
GuritAU/NZ/SEAProductCatalogue 23 GPC-APAC-29-1117
Adhesive Films
SA 70 is an adhesive film that is designed for secondary bonding, core-bonding and for co-curing with the range of Gurit prepregs. It can be cured at temperatures as low as 70° C, or can be more quickly cured at temperatures above 120°C. The product has an out-life of 28 days.
SA 80 is an adhesive film that is designed for secondary bonding, core-bonding and for co-curing with the range of Gurit prepregs. It can be cured at temperatures as low as 80°C, or can be more quickly cured at temperatures above 120°C. It has an out-life of 56 days at room temperature.
Surface Films
Gurit have a range of surfacing materials specific to a number of applications. SF 70 and 80 are pale green lightweight, sandable films curable at 70°C and 80°C respectively. It provides a pin-hole free surface to all marine mouldings with minimal print-through, onto which a paint finish can be applied.
SF 95VH is a silicon carbide filled surfacing system developed initially for the automotive sector to protect vulnerable underbody components of both GT racing and sports cars which minimises fibre damage from foreign object impacts. For details of cure schedules, please refer to data sheet.
SF 96 is a grey filled epoxy film designed to enhance the surface finish of composite components. Curable at 85°C with a vacuum only process it provides an easy sanding pinhole free surface finish with minimal print through from the underlying laminate. SF 96 provides a stable surface onto which a paint finish can be applied once lightly keyed.
Syntactic Core
SY 110 is a lightweight drapable core material that is designed to be co-curable with most Gurit Epoxy Prepregs & SPRINT™ to produce ultra-light and stiff panels. SY 110 has a wide process window, curing from 85-130ºC. SY 110 is available at 0.7mm and 1.0mm thickness.
Intensifying Pastes
Gurit’s mono-component pastes are pre-catalysed adhesive/filler systems that can be used in conjunction with Gurit prepregs and SPRINT™. They are used as in-situ fillers to bridge corners or tight radii and can also be used as core splicing adhesives. The system range covers black and white variants in high and low densities. Being pre-catalysed system, they require freezer storage for long-term stock holding. Out-life at 21°C is 20 days.
GuritAU/NZ/SEAProductCatalogue 24 GPC-APAC-29-1117
Code Selector
Adhesive Films SA 70
Reinf. Wt (gsm) Width (mm) Resin
Weight (g) Format Length (lm) Quantity (m2) Order Code Availability
SA 70 Film 0 1270 100g No Carrier 100 127 PP00-3640 SPECIALIST
SA 70 Film 0 1270 150g No Carrier 81 102.87 PP00-5549 SPECIALIST
SA 70 Film 0 1270 200g No Carrier 79 100.33 PP00-5550 SPECIALIST
SA 70 Film 0 1270 250g No Carrier 75 95.25 PP00-2967 SPECIALIST
SA 70 Film 25 1270 150g Scrim 100 127 PP11-3420 NZ
SA 70 Film 25 1270 250g Scrim 80 101.6 PP11-2279 NZ
SA 70 Film 25 1270 400g Scrim 50 63.5 PP11-2278 SPECIALIST
SA 80
Reinf. Wt (gsm) Width (mm) Resin
Weight (g) Format Length (lm) Quantity (m2) Order Code Availability
SA 80 Film 0 1270 100g No Carrier 100 127 PC00-735 SPECIALIST
SA 80 Film 0 1270 150g No Carrier 100 127 PP00-5476 SPECIALIST
SA 80 Film 0 1270 200g No Carrier 100 127 PC001778 SPECIALIST
SA 80 Film 0 1270 250g No Carrier 80 101.6 PC00-4202 SPECIALIST
SA 80 Film 0 1270 250g No Carrier 300 381 PC00-6437 SPECIALIST
SA 80 Film 0 1270 300g No Carrier 50 63.5 PC00-2270 SPECIALIST
SA 80 Film 0 1270 400g No Carrier 50 63.5 PC004361 SPECIALIST
SA 80 Film 25 1270 150g Scrim 100 127 PC11-666 SPECIALIST
SA 80 Film 25 1270 200g Scrim 80 101.6 PC11-669 AU
SA 80 Film 25 1270 250g Scrim 80 101.6 PC11-579 AU/NZ
SA 80 Film 25 1270 250g Scrim 20* 25.4 PC11-7022 SPECIALIST
SA 80 Film 25 1270 300g Scrim 80 101.6 PC11-804 SPECIALIST
SA 80 Film 25 1270 400g Scrim 50 63.5 PC11-580 SPECIALIST
SA 80 Film 25 1270 500g Scrim 50 63.5 PC11-3102 SPECIALIST
Black Pigmented (BL) Adhesive Film
SA 80 Film 25 1270 250g Scrim 79 100.3 PC11-5799 SPECIALIST
SA 80 Film 25 1270 400g Scrim 60 76.2 PC11-6007 SPECIALIST *note that a minimum 4 roll order applies & an additional price premium may be applied
AU/NZ = stocked product
AU = stocked in Australia only
NZ = stocked in New Zealand only
SPECIALIST = please contact your local customer support team for product availability
For indicative purposes only, product availability subject to change at any time. Please contact Gurit Customer Service team for further information.
GuritAU/NZ/SEAProductCatalogue 25 GPC-APAC-29-1117
Surfacing Films
Reinf. Wt (gsm) Width (mm) Resin
Weight (g) Format Length (lm) Quantity (m2) Order Code Availability
SF70 Film 138 1260 150g 2 Scrims 50 63 SC11-4405 SPECIALIST
SF80 Film 138 1255 150g 2 Scrims 80 100.4 SC11-2829 SPECIALIST
SF80 Film 138 1255 150g 2 Scrims 20* 25.1 SC11-7021 SPECIALIST
SF96 Film 138 1260 300g 2 Scrims 40 50.4 SA11-7004 SPECIALIST
SF96 Film 69 1260 700g Scrim 30 37.8 SA11-4587 SPECIALIST
SF95VH Film 50 1270 300g Scrim 50 63.5 SA11-1654 SPECIALIST *note that a minimum 4 roll order applies & an additional price premium may be applied
Syntactic Core Films
SY 110
Width (mm)
Resin Weight (g)
Thickness (mm) Format Length (lm) Quantity
(m2) Order Code Availability
SY 110 Film 1270 560 0.7 No Carrier 33 41.9 SA00-4606 SPECIALIST
SY 110 Film 1250 800 1.0 No Carrier 60 37.5 SA00-2691 SPECIALIST
AU/NZ = stocked product
AU = stocked in Australia only
NZ = stocked in New Zealand only
SPECIALIST = please contact your local customer support team for product availability
For indicative purposes only, product availability subject to change at any time. Please contact Gurit Customer Service team for further information.
GuritAU/NZ/SEAProductCatalogue 26 GPC-APAC-29-1117
Fire Retardant Materials
Gurit’s range of Fire Retardant (FR) products are designed to deliver high performance laminates whilst meeting demanding fire requirements. The ease of use and processing properties of these systems allow large parts to be manufactured in one operation using vacuum only consolidation.
The FR range is available in a wide variety of formats from ambient curing liquid systems to elevated temperature curing SPRINT™ products. Typical applications include cladding of buildings, interior and exterior train parts, commercial/military craft and fire protection on passenger ferries/superyachts.
Product Selector Format System Main Features Intended
Application Fire Test Standards
Laminating Ampreg 21FR
¬ Range of working times ¬ Capable of ambient only cures ¬ Ideal for wet laminating large
composite structures
Large Civil Structures
BS 476 (Parts 6 & 7) UL94
SPRINT™ ST 91FR
¬ Outstanding compressive properties ¬ Low void content vacuum bag
processing ¬ Controlled flow ¬ Light tack – suitable for use in higher
ambient temperature
Civil Structures ASTM E84 UL94 BS476 Part 7
ST 120FRSBL ¬ 95°C Curable ¬ 120°C Tg ¬ Low smoke formulation ¬ Excellent tack and drape ¬ HL2 in R7 to EN45545
Rail / Industrial / commercial marine craft
EN45545 ASTM E84
Prepreg
SE 120FRSBL
SE 90FRBL
¬ Black tinted resin ¬ Outstanding compressive properties ¬ Controlled flow ¬ Light tack
Civil Structures
Resin Film SA 120FRSBL ¬ 95°C Curable ¬ 120°C Tg ¬ Low smoke formulation ¬ Improves de-moulded surface finish ¬ HL2 in R7 to EN45545
Rail / Industrial / commercial marine craft
EN45545 ASTM E84
Surface Film
SF 120FRSBL
SF 80FROBL ¬ Effect FR layer to epoxy substrates ¬ High gloss black surface finish ¬ Resistant to Moisture ingress
Protection of structural components; engine bays and exhaust runs in marine craft
ISO 5660-1 FMVSS302
Fire Retardant Laminating Systems ....................................................................................................................... 27
Fire Retardant SPRINT™ Systems ........................................................................................................................ 27
Fire Retardant Prepreg Systems ............................................................................................................................ 28
GuritAU/NZ/SEAProductCatalogue 27 GPC-APAC-29-1117
Code Selector
Fire Retardant Laminating Systems
Ampreg 21FR Size Units Description Mix Ratio (R:H) Order Code Availability
Individual resin component size
Resin 257 kg AMPREG 21FR RESIN 257KG
F122-005 SPECIALIST
Resin 15.85 kg AMPREG 21FR RESIN 15.85KG F122-004 SPECIALIST
Use the mix ratio to select recommended hardener component size
Standard 18 kg AMPREG21 HARD STD 18KG
100:21 (by weight)
F121-018 SPECIALIST
Standard 3.33 kg AMPREG21 HARD STD 3.33KG F121-036 SPECIALIST
Slow 3.33 kg AMPREG21 HARD SLOW 3.33KG F121-037 SPECIALIST
Extra Slow 18 kg AMPREG21 HARD EXT-SLOW 18KG F121-020 SPECIALIST
Ultra Slow 900 kg AMPREG 21FR UL-SLOW HARD 900KG 100:18
(by weight)
F122-007 SPECIALIST
Ultra Slow 15.4 kg AMPREG 21FR UL-SLOW HARD 15.4KG F122-006 SPECIALIST
Ultra Slow 15.4 kg AMPREG 21FR UL-SLOW HARD 15.4KG A/F F122-008 SPECIALIST
Fire Retardant SPRINT™ Systems
SPRINT™ Reinf. Wt (gsm)
Width (mm) RC (%) Format Length (lm) Quantity
(m2) Order Code Availability
ST 91FR
XC411 410 1270 42 S/S 150 190.5 SA23-6855 SPECIALIST
WRE581T 580 1250 37 S/S 50 62.5 SA11-6361 SPECIALIST
YE905 911 1270 51 S/S 49 62.2 SA21-5615 SPECIALIST
ST 120FRSBL
RC200T 194 1270 48 S/S 40 50.8 SA13-7009 SPECIALIST
XC411 410 1270 48 S/S 25 31.8 SA23-6944 SPECIALIST
RC416T 416 1270 48 S/S/L 100 127 SA13-6943 SPECIALIST
WRE581T 580 1250 42 S/S 20 25 SA11-6945 SPECIALIST
GuritAU/NZ/SEAProductCatalogue 28 GPC-APAC-29-1117
Fire Retardant Prepreg Systems
Prepreg Reinf. Wt (gsm)
Width (mm) RC (%) Format Length
(lm) Quantity
(m2) Order Code Availability
SE 90FRBL
XC411 410 1270 40 1PO 45 57.15 PG23-5123 SPECIALIST
HEC 450 400 35 POPA 100 40 PG53-5122 SPECIALIST
SE 120FRSBL
HEC 200 300 45 POPA 167 50 PA53-7008 SPECIALIST
Ancillaries Reinf. Reinf.
Wt (gsm)
Width (mm)
Resin Weight (g) Format Length
(lm) Quantity
(m2) Order Code Availability
SA 120FRSBL Scrim 25 1270 250 Resin Film 50 62.8 PA11-6940 SPECIALIST
SF 120FRSBL 2 Scrims 138 1255 200 Surface Film 50 63.5 SA11-6941 SPECIALIST
SF 80FROBL Scrim 25 1270 220 Surface Film 60 76.2 SC00-2243 SPECIALIST
SF 80FROBL 2 Scrims 138 1260 220 Surface Film 50 63 SC11-5341 SPECIALIST
AU/NZ = stocked product
AU = stocked in Australia only
NZ = stocked in New Zealand only
SPECIALIST = please contact your local customer support team for product availability
For indicative purposes only, product availability subject to change at any time. Please contact Gurit Customer Service team for further information.
GuritAU/NZ/SEAProductCatalogue 29 GPC-APAC-29-1117
Core Materials
Introduction Cores in a sandwich construction are specified by designers and architects to increase stiffness and reduce the weight of a composite structure. Gurit has a range of core materials to fit any specification or manufacturing process.
Gurit® Corecell™ Gurit® Corecell™ is a structural foam core material using a SAN polymer base featuring high toughness and impact resistant characteristics. Gurit® Corecell™ has become widely accepted for the construction of large, high performance structures. Although originally developed for the marine industry, it is now used in a range of other applications such as wind turbines and sub-sea vessels. Gurit® Corecell™ grades have various type approvals including the American Bureau of Shipping (ABS), Det Norske Veritas (DNV), Germanischer Lloyd (GL), Registro Italiano Navale (RINA) and Bureau Veritas (BV). Please check for additional product approvals.
Gurit® PVC Gurit® PVC is a closed cell, cross-linked PVC foam. It provides high strength to weight ratio for all composite application, as well as the addition of high temperature grades in 60 and 80 kg/m3 densities.
Gurit® PVCell™ PVCell™ G-Foam is a closed cell, cross-linked PVC foam. Key features of PVCell™ G-Foam include outstanding chemical resistance, negligible water absorption, and good thermal insulation capabilities. It is compatible with most common resin systems including epoxy, polyester and vinylester.
Gurit® G-PET™ Gurit® G-PET™ is a highly adaptable, recyclable, thermoplastic foam with a good balance of mechanical properties, temperature resistance, density and cost for a wide range of applications and production processes. Gurit® G-PET™ is approved by Germanischer Lloyd (GL) and American Bureau of Shipping (ABS). Gurit® G-PET™ is approved by Det Norske Veritas (DNV).
Gurit® Kerdyn™ Green - New core to be released through 2017 Gurit® Kerdyn™ Green is a recyclable, thermoplastic foam produced out of 100% recycled PET with good mechanical properties, temperature resistance and significantly improved resin uptake. Offering a cost efficient solution against higher performance cores, the range will offer both normal and fire retardant densities.
Gurit® Balsaflex™ Gurit® Balsaflex™ is the classic end-grain balsa wood core, featuring highest strength and stiffness to weight ratio of all core materials. Gurit® Balsaflex™ is available in range of densities, thickness and format/finish. Gurit® Balsaflex™ is approved by Germanischer Lloyd (GL) and Lloyd's Register
GuritAU/NZ/SEAProductCatalogue 30 GPC-APAC-29-1117
Forms of Supply Gurit standard product forms are described below. Gurit can also tailor sheets to your own specification - please call to discuss your requirements.
PL – Plain Sheet – Optimum material properties. Limited bending in-mould.
PH – Plain with Bleeder Holes – Assists air release in vacuum bag processes.
Cuts for conformability (Foam)
Gurit knife cut finish is standard on Gurit® Corecell™ and Gurit® Kerdyn™. Saw cut is standard for Gurit® PVC while knife cut finish on Gurit® PVC is limited. Knife cuts are not visible when the sheets lie flat and these narrow knife-cuts minimize unnecessary resin consumption compared to saw-cut core finishes. Please be advised that cuts are dependent upon the density and thickness of the material. Higher density and thickness materials may need to be saw cut. Maximum sheet size is half of a full-size sheet. Please contact your customer support representative for more information.
SC – Single Cut – Provides flexibility in a single direction on one or both side s of a sheet. If done on both sides, the cuts intersect so no bleeder holes are necessary for vacuum bagging. Max sheet size is half of a full-size sheet.
DC – Double Cut – Provides optimum flexibility in two directions on one or two sides of the sheets. If Double-Cut on both sides, the intersecting cuts make DC a highly effective resin infusion medium. Max sheet size is half of a full-size sheet.
CS – Contour Scrim – Provides optimum flexibility in two directions. Sheets are cut in 30mm squares and bonded to a glass scrim. Available in half sheet size only.
GuritAU/NZ/SEAProductCatalogue 31 GPC-APAC-29-1117
Forms of Supply VIC – Vacuum Infusion Core – There are several VIC options and G urit can customise grooving patterns and bleeder holes as required. For curved laminate sections, double-sided DC is very effective system for resin infusion with low weight gain. Heat-forming VIC surface cut also useful for obtaining curved panels with minimal resin uptake.
Product Formats (Balsa)
Gurit® Balsaflex™ is available plain or with typical formats including perforations, microgrooves, with or without scrim, contour scrim and with optional coating.
Other Product Formats
Bead and Cove - Bead and cove strip planking aids the building of large, curved structures, in a mouldless build method.
Fillet strips – Triangular edge strips to create tapered panel edge drop-offs, or stringer base fillets.
Kits – Gurit has an extensive kitting capability to provide all the formats described here in customized, numbered, ready to use, CNC machined kits.
GuritAU/NZ/SEAProductCatalogue 32 GPC-APAC-29-1117
Core Materials Range Gurit® Corecell™ M Gurit® Corecell™ M is the next generation of Gurit® Corecell™. Combining high static properties, high toughness and compatibility with infusion and prepreg processes. Gurit® Corecell™ M benefits from American Bureau of Shipping (ABS), Det Norske Veritas (DNV), Germanischer Lloyd (GL), Registro Italiano Navale (RINA) and Bureau Veritas (BV) certification.
Gurit® Corecell™ S Gurit® Corecell™ S has been developed primarily to resist hydrostatic pressures in sub-sea applications. It is manufactured in two densities, and buoyancy modules can therefore be designed to depths up to 1100 metres (averages). Gurit® Corecell™ S is only available in full thickness.
Gurit® Corecell™ T Gurit® Corecell™ T is the lightest density Corecell™ foam available. T400 provides improved compressive strength over M60 and is better suited for thin skinned laminates. Gurit® Corecell™ T has ABS, GL, and DNV certification.
Gurit® G-PET™ Gurit® G-PET™ is a highly adaptable, recyclable, thermoplastic foam with a good balance of mechanical properties, temperature resistance, density and cost for a wide range of applications and production processes. Gurit® G-PET™ has GL certification.
Gurit® Kerdyn™ Green - New core to be released through 2017
Gurit® Kerdyn™ Green and Gurit® Kerdyn™ Green FR are both 100% recycled PET foam, offering a wide range of densities and significantly improved resin uptake performance. The latest product range is currently under DNV-GL certification.
Gurit® PVC Gurit® PVC is a closed cell, cross-linked PVC foam. It provides high strength to weight ratio for all composite applications. Gurit® PVC has DNV certification. The Gurit® PVC range also offers HT60 and HT80 with high temperature processing up to 140°C.
Gurit® PVCell™
PVCell™ G-Foam is an all purpose core and can be used in decks, hull sides, bulkheads, floors and wind turbine blade shells. PVCell™ G-Foam is compatible with most common resin systems including epoxy, polyester and vinylester. PVCell™ has various approvals including GL and DNV.
Gurit® Balsaflex™ Gurit® Balsaflex™ is the classic high quality end-grain balsa wood core. Rigid panels are available in higher thickness, flexible panels are available up to 55mm. Large flexible panels with 1220 x 1220mm are also available. Gurit® Balsaflex™ has GL certification.
GuritAU/NZ/SEAProductCatalogue 33 GPC-APAC-29-1117
Code Selector Gurit® Corecell™
Corecell Short Edge Marking Nominal Density Nominal
Sheet Size Unbonded Thickness
Range Availability
kg/m3 mm mm
Gurit® Corecell™ M available from the Gurit AU / NZ and Gurit Tianjin (China) sites
M60 Yellow + Green 65 1285x2605 3-50 AU/NZ
M80 Yellow + Blue 85 1220x2440 3-50 AU/NZ
M100 Yellow + Black 107.5 1130x2275 3-48 AU/NZ
M130 Yellow + Light Brown 140 1015x2045 3-40 AU/NZ
M200 Yellow + Brown 200 915x1830 3-30 AU/NZ
Gurit® Corecell™ Tavailable from the Gurit site in Magog (Canada)
T400 White + Green 71 1285x2605 3-53 SPECIALIST
T500 White + Blue 94 1195x2440 3-40 SPECIALIST
Gurit® Corecell™ Savailable from the Gurit site in Magog (Canada)
S1200 Red + Brown 210 890x1830 21-24 SPECIALIST
S1800 Red + Mauve 315 785x1600 16-21 SPECIALIST
Gurit® G-PET™
Core Type Short Edge Marking Nominal Density Nominal
Sheet Size Unbonded Thickness
Range Availability
kg/m3 mm mm
G-PET available from the Gurit AU / NZ and Gurit Tianjin (China) sites
80 Brown + Yellow 80 1005/1220 x 2440 3-245 AU
90 Brown + Orange 94 1005/1220 x 2440 3-245 NZ
100 Brown + Green 104 1005/1220 x 2440 3-245 SPECIALIST
110 Brown + Blue 114 1005/1220 x 2440 3-245 SPECIALIST
135 Brown + Grey 135 1005/1220 x 2440 3-245 SPECIALIST
200 Brown + Black 200 1005/1220 x 2440 3-245 SPECIALIST
G-PET FR available from the Gurit Tianjin (China) sites
75 Blue + Yellow 75 1005/1220 x 2440 3-245 SPECIALIST
100 Blue + Green 100 1005/1220 x 2440 3-245 SPECIALIST
G-PET LITE available from the Gurit Tianjin (China) sites
Comment : LITE being available in all densities but only supplied in thickness range 10-150mm (3/8-6 inches)
Please note: Maximum unbonded thicknesses can vary across Gurit sites. Please contact your local sales representative for more information
GuritAU/NZ/SEAProductCatalogue 34 GPC-APAC-29-1117
Gurit® Kerdyn™ Green - New product to be released through 2017
Core Type Short Edge Marking Nominal Density Nominal
Sheet Size
Unbonded Thickness
Range Availability
kg/m3 mm mm
Gurit® Kerdyn™ Green available from the Gurit NZ and Gurit Tianjin (China) sites
100 Green 100 1005 x 2440 5-200 SPECIALIST
115 Black 115 1005 x 2440 5-175 SPECIALIST
135 Black + Green 135 1005 x 2440 5-150 SPECIALIST
150 Orange 150 1005 x 2440 5-135 SPECIALIST
200 Black + Yellow 200 1005 x 2440 5-100 SPECIALIST
250 Black + Blue 250 1005 x 2440 5-80 SPECIALIST
Gurit® Kerdyn™ Green FR available from the Gurit NZ and Gurit Tianjin (China) sites
80 Blue + Red 80 1005 x 2440 5-200 SPECIALIST
115 Black + Red 115 1005 x 2440 5-175 SPECIALIST
180 Brown + Red 180 1005 x 2440 5-110 SPECIALIST
Gurit® PVC and PVC HT
Core Type Short Edge Marking Nominal Density Nominal
Sheet Size
Unbonded Thickness
Range Availability
kg/m3 mm mm
Gurit® PVC is available through selected countries. Contact your local sales representative for more information.
40 Azure 40
1330 x 2850 3-84 NZ
48 Lilac 48 1270 x 2730 3-80 NZ
60 Yellow 60 1150 x 2450 3-78 AU/NZ
80 Green 80 1020 x 2180 3-72 AU/NZ
100 Red 100 950 x 2050 3-68 NZ
130 Blue 130 850 x 1900 3-58 NZ
200 Brown 200 750 x 1600 3-48 NZ
250 Green 250 700 x 1500 3-47 SPECIALISTZ
Gurit® PVC HT is available through selected countries. Contact your local sales representative for more information.
HT60 Pink 60
1120 x 2400 3-78 SPECIALIST
HT80 Light Yellow 80 1005 x 2150 3-75 SPECIALIST
GuritAU/NZ/SEAProductCatalogue 35 GPC-APAC-29-1117
Gurit® PVCell™
Core Type Short Edge Marking Nominal Density Nominal
Sheet Size
Unbonded Thickness
Range Availability
kg/m3 mm mm
Gurit® PVCell is available through selected countries. Contact your local sales representative for more information.
45 Red + Blue 48
1220 x 2440 3-80 SPECIALIST
60 Red + Green 60 1220 x 2440 3-75 SPECIALIST
80 Red + Black 80 1220 x 2440 3-70 SPECIALIST
100 Red + White 100 1100 x 2200 3-65 SPECIALIST
130 Red + Yellow 130 950 x 1900 3-50 SPECIALIST
200 Red + Grey 200 810 x 1620 3-45 SPECIALIST
Gurit® Balsaflex™
Core Type Short Edge Marking Nominal Density Nominal
Sheet Size
Unbonded Thickness
Range Availability
kg/m3 mm mm
Gurit® Balsaflex™ available from the Gurit site in Equador
110 Written 110
610x1220 6.35-55 SPECIALIST
150 Written 155 610x1220 6.35-55 SPECIALIST
220 Written 220 610x1220 6.35-55 SPECIALIST
Please note: Maximum unbonded thicknesses can vary across Gurit sites. Please contact your local sales representative for more information
GuritAU/NZ/SEAProductCatalogue 36 GPC-APAC-29-1117
Nomex Honeycomb Nomex Honeycomb - Plain Sheet (Hex)
Plain sheet Nomex is manufactured from Aramid paper & is a very uniform looking honeycomb cell shape. The shear properties vary with direction, with substantially higher values in width direction of the sheet (TL). The plain sheet is not formable like both the PX and OX cell shapes.
¬ The Ribbon direction is the TL direction ¬ Has the highest shear property (only direction only) of all three types of Nomex.
Average Density (kg/m3)
48 64 72 80 96
Sheet Length (mm) 2440 2440 2440 2440 2440
Width (mm) 1220 1220 1220 1220 1220
Area (m2) 2.98 2.98 2.98 2.98 2.98
Thickness Range (mm) Thickness range offered is 3mm up to maximum 400mm upon request
Paper Thickness (um) 51 51 51 or 76 51 or 76 76
Commercial / Aerospace Grade Commercial Commercial Commercial Commercial Commercial
Cell Size 1/8" (3.2mm) 1/8" (3.2mm) 1/8" (3.2mm) 1/8" (3.2mm) 1/8" (3.2mm)
AU/NZ NZ SPECIALIST SPECIALIST SPECIALIST
Nomex Honeycomb – Over Expanded (OX)
The Over Expanded Nomex (OX) offers excellent formability over complex shapes but the shear properties are substantially lower than plain sheet Nomex.
¬ Good formability ¬ Low shear properties
The Ribbon direction is the TL direction Average Density (kg/m3)
29 48 64 72 80
Sheet Length (mm) 2438 2438 2438 2438 2438
Width (mm) 990 990 990 990 990
Area (m2) 2.41 2.41 2.41 2.41 2.41
Thickness Range (mm) Thickness range offered is 3mm up to maximum 400mm upon request
Paper Thickness (um) 51 51 or 76 51 or 76 51 or 76 76
Commercial / Aerospace Grade Commercial Commercial Commercial Commercial Commercial
Cell Size 3/16" (4.8mm) 3/16" (4.8mm) 3/16" (4.8mm) 3/16" (4.8mm) 3/16" (4.8mm)
SPECIALIST/NZ SPECIALIST NZ SPECIALIST SPECIALIST
GuritAU/NZ/SEAProductCatalogue 37 GPC-APAC-29-1117
Nomex Guide - which Nomex should I use?
Partially Expanded Nomex (PX) is manufactured with 3/1000th inch (76um) Aramid paper which is 50% thicker than the standard paper used in both the plain sheet (Hex) and Over Expanded (OX). The result of this is that it offers substantially higher shear properties in both directions over the standard OX while still offering the formability of the Over Expanded cell shape.
¬ The shear properties of PX Nomex are fairly even in both the TW & TL directions but are substantially better than OX Nomex.
¬ The Ribbon direction is the TL direction Over Expanded Nomex (OX) is manufactured with 2/1000th inch (51um) Aramid paper. This offer excellent formability over complex shapes but the shear properties are substantially lower than both the PX & plain sheet Nomex.
¬ Good formability ¬ Low shear properties ¬ The Ribbon direction is the TL direction
Plain Sheet Nomex (Hex) is manufactured from 2/1000th inch (51um) Aramid paper and is a very uniform looking honeycomb cell shape. The shear properties vary with direction, with substantially higher values in width direction of the sheet (TL). The plain sheet is not formable like both the PX and OX cell shapes.
¬ The Ribbon direction is the TL direction ¬ Has the highest shear property (only direction only) of all three types of nomex.
High Shear Plain Sheet (HS Hex) is manufactured from 3/1000th inch (76um) Aramid paper. The shears are higher due to the thicker paper. Kevlar 636 Honeycomb is available, it must be noted that this material is expensive and inherently stiffer to bend around any shape. The shear properties are higher than standard Nomex material & may allow (depending on the structural engineers) weight saving by utilising lower densities.
GuritAU/NZ/SEAProductCatalogue 38 GPC-APAC-29-1117
B³ Smartpac from Gurit B³ SmartPac is a versatile construction solution that helps builders manufacture composite components more efficiently and cost-effectively than ever before. B³ SmartPac comprises all the reinforcement and core materials required for the job, pre-cut to the exact shape and size to fit the mould, and clearly labelled for alignment and location. The materials are packed in boxes in the order of assembly, and are accompanied by a comprehensive schematic and written construction manual, with a process defined in conjunction with the builder, and with integral quality controls.
B³ Smartpac Benefits
¬ Reduced overall costs through: ¬ reduced time in-mould ¬ reduced labour costs ¬ reduced waste levels ¬ reduced material costs
¬ Repeatable process with known costs and known quality ¬ Efficient procurement
¬ Order one B³ SmartPac instead of multiple materials ¬ One-stop-shop for materials, engineering, quality control, and process support
¬ Improved overall quality
The B³ SmartPac is suitable for many types of marine applications, and most processing techniques and products.
¬ Volume production boats ¬ Semi-custombuilds ¬ Custom builds ¬ Commercial/military boats ¬ Superyachts ¬ Hand lay-up ¬ Epoxy, vinylester, polyester ¬ Vacuum infusion ¬ Resin Transfer Moulding (RTM) ¬ Prepreg and SPRINT™
Whatever the requirement, Gurit can package and supply the B³ SmartPac to meet your specific needs.
GuritAU/NZ/SEAProductCatalogue 39 GPC-APAC-29-1117
Gurit Hi-Panels Gurit Hi-Panels offer customers ease and speed of build, reduced set up and labour costs, and high quality construction of their composite part.
Hi-Panels are epoxy infused composite panels, which can be made from a variety of Gurit’s core materials, with glass and/or carbon skins, and are either structurally engineered by the company’s in-house team or manufactured to the customer’s specification.
They are suitable for a range of applications such as the structural elements of sailing yachts or power boats, hatch lids, doors and so on.
Hi-Panels can be delivered as finished panels, with maximum dimensions of 9m x 2m, or cut to shape, as supplied by the customer. The shapes can be labelled, and remain tabbed in the original panel for ease of transportation and storage.
Please contact Gurit on email at info-nz@gurit.com or phone 64 9 415 6262 for more information. Please note: Hi-Panels are currently only available in Australia, New Zealand and the Pacific Islands
GuritAU/NZ/SEAProductCatalogue 40 GPC-APAC-29-1117
Adhesive Systems
The Spabond™ range is supplied in various formats to suit different requirements. Cartridge applicators provide perfectly mixed adhesive to the joint, cleanly and with a minimum of waste. For larger volume applications Spabond™ adhesives can be mixed and dispensed using a range of mixing machines.
Gurit adhesive systems product descriptions may contain the following nomenclature:
S/S – straight sided metal pail for mixing machine extrusion and automated dispense
Spabond Adhesives
System Description Hardener Mix Ratio Working Time Clamp Time* Sag Max
Temp
Spabond™ 300 Series: structural, high dynamic load applications
Spabond™ 335
Toughened gap filling epoxy adhesive system.
Fast (Black) 2:1
(by volume)
10 - 30 mins 3 - 6hrs
5mm 65°C Slow (Grey) 1 – 2hrs 8 – 9hrs
Extra Slow 6 – 10hrs 10 – 25hrs
Spabond™ 340LV HT
High strength, rubber toughened, fast dispense. Uses: Industrial, wind energy and marine.
Fast (Red) 2:1
(by volume)
20 – 40mins 2 – 5hrs 20 –
25mm 68°C Slow (Purple) 1 - 2hrs 10 – 20hrs
Extra Slow (Blue) 2.5 – 6hrs 15 – 35hrs
Spabond™ 345
Highly sag resistant. Uses: highest performance marine projects
Fast (Black) 2:1
(by volume)
20 – 40mins 3 – 8hrs 15 –
30mm
75°C
Slow (Red) 2 - 3hrs 7 – 16hrs 85°C
Extra Slow (Blue) 3 – 6hrs 10 – 25hrs 80°C
Spabond™ 500 Series: specialist substrate and applications
Spabond™ 5 Minute `Tacking and secondary bonding. 1:1
(by volume) 90 seconds 15 mins 10 - 15mm 55°C
Spabond™ 540 Spabond™ 540LV
High elongation, long bonding times.
Fast (Red)
1:1 (by volume)
30 - 40mins 2 – 5hrs
20 – 30mm
56°C
Standard (Purple) 1 – 2hrs 10 – 20hrs 58°C
Low viscosity resin option for easier application.
Slow (Green) 3 – 6hrs 20 – 30hrs 52°C
Extra Slow (Blue) 6.5hrs tbc tbc
Spabond™ 568 Core bonding adhesive 2:1
(by volume) 5 – 6 hrs 24 hrs 10mm 65°C
Spabond™ 570
Easy mixing/smooth spreading. Bonds all woods
1:1 (by volume) 90 mins 10 - 15 hrs 10 -
20mm 55°C
Spabond™ 700 Series: rapid structural adhesives
Spabond™ 730
High strength, rapid curing. General purpose adhesive.
1:1 (by volume) 3 – 5 mins 1 – 2 hrs 10 -
15mm 60°C
*clamp time is determined as the time to reach a cleavage strength of 2kN
Please note: A suitable mixing method is required to mix and dispense Spabond™ adhesives. For our range of dispense guns and mix heads, please refer to the Ancillary Products section.
GuritAU/NZ/SEAProductCatalogue 41 GPC-APAC-29-1117
Code Selector
Spabond™ 300 Series: structural, high dynamic load applications
Spabond™ 335 Size Units Description Mix Ratio (R:H) Order Code Availability
Resin 20 kg SP335 RESIN 20KG F644-032 SPECIALIST
Fast 9.2 kg SP335 HARD FAST 9.2KG 100:46 (by weight) F644-039 SPECIALIST
Standard 8.8 kg SP335 HARD STD 8.8KG 100:44 (by weight) F644-036 SPECIALIST
Extra-slow 8.4 kg SP335 HARD X-SLOW 8.4KG 100:42 (by weight) F644-037 SPECIALIST
Spabond™ 340LVHT Size Units Description Mix Ratio
(R:H) Order Code Availability
Resin and hardener pack sizes
HT Fast Pack 400 ml SP340LV R/HF-HT 400ml CART/BOX OF 20
F645-094 AU/NZ
HT Fast Pack 900 ml SP340LV-R/HF-HT 900ml CART/BOX OF 10 F645-046 SPECIALIST
HT Slow Pack 400 ml SP340LV R/HSL-HT 400ml CART/BOX OF 20 F645-095 AU/NZ
HT Slow Pack 900 ml SP340LV-R/HSL-HT 900ml CART/BOX OF 10 F645-048 SPECIALIST
HT Extra-slow 400 ml SP340LV R/HXS-HT 400ml CART/BOX OF 20 F645-096 SPECIALIST
HT Extra-slow 900 ml SP340LV-R/HXS-HT 900ml CART/BOX OF 10 F645-069 SPECIALIST
Individual resin component size
Resin 200 kg SP340LV RESIN 200KG
F645-049 SPECIALIST
Resin 20 kg SP340LV RESIN 20KG F645-053 AU/NZ
Resin 20 kg SP340LV RESIN 20KG S/S F645-054 SPECIALIST
Use the mix ratio to select recommended hardener component size
HT Fast 200 kg SP340 HARD FAST (HT) 200KG 100:49
(by weight)
F645-080 SPECIALIST
HT Fast 20 kg SP340 HARD FAST (HT) 20KG F645-078 SPECIALIST
HT Fast 10 kg SP340 HARD FAST (HT) 10KG F645-097 AU/NZ
HT Slow 200 kg SP340 HARD SLOW (HT) 200KG 100:49
(by weight)
F645-071 SPECIALIST
HT Slow 20 kg SP340 HARD SLOW (HT) 20KG F645-072 SPECIALIST
HT Slow 10 kg SP340 HARD SLOW (HT) 10KG F645-098 AU/NZ
HT Extra-slow 200 kg SP340 HARD EX-SLOW (HT) 200KG 100:47
(by weight)
F645-083 SPECIALIST
HT Extra-slow 20 kg SP340 HARD EX-SLOW (HT) 20KG F645-081 SPECIALIST
HT Extra-slow 10 kg SP340 HARD EX-SLOW (HT) 10KG F645-099 AU/NZ
AU/NZ = stocked product
AU = stocked in Australia only
NZ = stocked in New Zealand only
SPECIALIST = please contact your local customer support team for product availability
For indicative purposes only, product availability subject to change at any time. Please contact Gurit Customer Service team for further information.
GuritAU/NZ/SEAProductCatalogue 42 GPC-APAC-29-1117
Spabond™ 345 Size Units Description Mix Ratio (R:H) Order Code Availability
Resin and hardener pack sizes
Fast Pack 400 ml SP345 R/HF 400ml CART/BOX 20
F646-016 SPECIALIST
Black Fast Pack 400 ml SP345 R/HFBL400ml CART/BOX 20 F646-024 SPECIALIST
Slow Pack 400 ml SP345 R/HSL 400ml CART/BOX 20 F646-014 SPECIALIST
Individual resin component size
Resin 20 kg SP345 RESIN 20KG F646-038 SPECIALIST
Use the mix ratio to select recommended hardener component size
Fast 20 kg SP345 HARD FAST 20KG 100:48
(by weight)
F646-049 SPECIALIST
Fast 9.6 kg SP345 HARD FAST 9.6KG F646-041 SPECIALIST
Black Fast 9.6 kg SP345 HARD FAST BLACK 9.6KG F646-042 SPECIALIST
Slow 20 kg SP345 HARD SLOW 20KG 100:48 (by weight)
F646-048 SPECIALIST
Slow 9.6 kg SP345 HARD SLOW 9.6KG F646-043 SPECIALIST
Extra-slow 9.6 kg SP345 HARD EX-SLOW 9.6KG 100:48 (by weight) F646-044 SPECIALIST
Spabond™ 500 Series: specialist substrate and applications
Spabond™ 5 Min Size Units Description Mix Ratio
(R:H) Order Code Availability
Resin and hardener pack sizes
Pack 400 ml SP 5-MIN.ADH.R/H 400ml CARTRIDGE/BOX 20 F652-021 SPECIALIST
Resin 310 ml SP 5-MIN.ADH.RES.310ml N/ PIGCART/BOX 20 F652-025 AU
Hardener 310 ml SP 5-MIN.ADH.HARD.310ml N/PIGCART/BOX 20 F652-027 AU
Spabond™ 540 Size Units Description Mix Ratio (R:H) Order Code Availability
Resin and hardener pack sizes
Fast Pack 600 ml SP540LV R/HF 600ml CART/BOX OF 12
F648-044 SPECIALIST
Standard Pack 600 ml SP540LV R/HSTD 600ml CART/BOX OF 12 F648-045 SPECIALIST
Individual resin component size
Resin 200 kg SP540 RESIN 200KG
F648-042 SPECIALIST
Resin 20 kg SP540 RESIN 20KG F648-041 AU
LV Resin 20 kg SP540LV RESIN 20KG F648-013 SPECIALIST
Use the mix ratio to select recommended hardener component size
Fast 18.4 kg SP540 HARD FAST 18.4KG 100:95 (by weight) F648-010 SPECIALIST
Standard 184 kg SP540 HARD STD 184KG 100:92 (by weight)
F648-033 SPECIALIST
Standard 18.4 kg SP540 STANDARD HARDENER 18.4KG F648-022 SPECIALIST
Slow 184 kg SP540 SLOW HARDENER 184KG 100:93 (by weight)
F648-038 SPECIALIST
Slow 18.4 kg SP540 SLOW HARDENER 18.4KG F648-030 AU
Extra-slow 18.4 kg SP540 HARD EXTRA SLOW 18.4KG 100:91 (by weight)
F648-048 SPECIALIST
For our range of dispense guns and mix heads, please refer to the Ancillary Products section.
GuritAU/NZ/SEAProductCatalogue 43 GPC-APAC-29-1117
Spabond™ 568 Size Units Description Mix Ratio (R:H) Order Code Availability
Individual resin component size
Resin 17.5 kg SP568 RESIN 17.5KG F654-023 SPECIALIST
Resin 10 kg SP568 RESIN 10KG (15.1L) F654-021 SPECIALIST
Use the mix ratio to select recommended hardener component size
Hardener 7.7 kg SP568 HARD EXTRA-SLOW 7.7KG 100:44 (by weight)
F654-024 SPECIALIST
Hardener 4.4 kg SP568 HARD EXTRA SLOW 4.4KG/7.6L F654-022 SPECIALIST
Spabond™ 570 Size Units Description Mix Ratio (R:H) Order Code Availability
Individual resin component size
Resin 20 kg SP570 RESIN 20KG 100:44 (by weight) F640-021 SPECIALIST
Resin 5 kg SP570 RESIN 5KG F640-019 SPECIALIST
Use the mix ratio to select recommended hardener component size
Hardener 20 kg SP570 HARD STANDARD 20KG 100:44 (by weight)
F640-022 SPECIALIST
Hardener 5 kg SP570 HARD STANDARD 5KG F640-020 SPECIALIST
Spabond™ 700 Series: rapid structural adhesives
Spabond™ 730 Size Units Description Mix Ratio (R:H) Order Code Availability
Resin and hardener pack sizes
Pack 400 ml SP730 R/H 400ml CART/BOX 20 F650-007 SPECIALIST
For our range of dispense guns and mix heads, please refer to the Ancillary Products section.
AU/NZ = stocked product
AU = stocked in Australia only
NZ = stocked in New Zealand only
SPECIALIST = please contact your local customer support team for product availability
For indicative purposes only, product availability subject to change at any time. Please contact Gurit Customer Service team for further information.
GuritAU/NZ/SEAProductCatalogue 44 GPC-APAC-29-1117
Liquid & Filled Systems
Gurit is a leading supplier of high performance epoxy products formulated to meet market and customer needs.
Gurit’s innovative approach and expertise in epoxy formulations continues to deliver market leading products for a wide range of market segments. Gurit provides a complete range of formulated products from in-mould gelcoats to multi-purpose systems.
Laminating Systems ............................................................................................................................................... 45
Infusion Systems .................................................................................................................................................... 49
RTM System ........................................................................................................................................................... 51
Multi-Purpose Systems ........................................................................................................................................... 52
Code Selector ......................................................................................................................................................... 53
Filling and Fairing ................................................................................................................................................... 55
Tooling Products ..................................................................................................................................................... 56
Coatings.................................................................................................................................................................. 58
GuritAU/NZ/SEAProductCatalogue 45 GPC-APAC-29-1117
Laminating Systems
The Ampreg wet laminating range consists of standard, commonly used laminating products, as well as systems with higher strengths and operating temperatures. A complete range of hardeners and modifiers give a wide variety of working times, viscosities and thixotropy.
Product Selector
System Description Hardener Speed Mix ratio Intended Application
Ampreg 21 Good wet out; low by-product and good through cure
Fast 1-2 hrs
100:33 (parts by weight)
General purpose
Standard 2-3 hrs
Slow 6-7 hrs
Extra Slow 7-10 hrs
High Tg 14 hrs
Ampreg 22 Good wet out; low by-product; good Tg generation
Fast 1-2 hrs
100 : 28 (parts by weight)
Medium to large mouldings
Standard 2-3 hrs
Slow 6-7 hrs
Extra Slow 7-10 hrs
14 hour 14 hrs
Ampreg 26
Premium laminating system with high mechanical properties and high Tg
Fast 1-2 hrs 100:33
(parts by weight)
High performance large mouldings Slow 7 hrs
Ultra Slow 8-10 hrs
Ampreg F230-1
3 component expanding epoxy system good for gap filling with consistent foam density
Slow Fully foamed less than 1 hr, Cure time varies with geometry
100:23 (parts by weight)
Rudder foils, crash bars
Extra Slow
Ampreg Thixotropic Pregel
Resin additive with a grease-like consistency, used primarily as a thixotrope - to be added to low viscosity laminating resins for applications where resin drainage is a concern.
Refer to product datasheet
Refer to product datasheet. Compatible systems: ¬ Ampreg 21 ¬ Ampreg 22 ¬ Ampreg 26
Vertical and overhead laminating situations, particularly where heavy, open weave fabrics are being used
Ampreg Adhesion Promoter
A unique resin system formulated to promote the adhesion between epoxy and vinylester resin
Ampreg Adhesion Promoter 100:28
(parts by weight)
Existing polyester gelcoats with higher performance epoxy resins supplied by Gurit.
GuritAU/NZ/SEAProductCatalogue 46 GPC-APAC-29-1117
Code Selector Laminating Systems
Ampreg 21 Size Units Description Mix Ratio (R:H) Order Code Availability
Resin and hardener pack sizes
Fast Pack 13.33 kg AMPREG21 R/H FAST 13.33KG PACK
F121-057 SPECIALIST
Fast Pack 3.6 kg AMPREG21 R/H FAST 3.6KG PACK F121-011 SPECIALIST
Fast Pack 1.33 kg AMPREG21 R/H FAST 1.33KG PACK F121-032 SPECIALIST
Standard Pack 3.6 kg AMPREG21 R/H STD 3.6KG PACK F121-012 SPECIALIST
Standard Pack 1.33 kg AMPREG21 R/H STD 1.33KG PACK F121-030 SPECIALIST
Slow Pack 3.6 kg AMPREG21 R/H SLOW 3.6KG PACK F121-013 SPECIALIST
Slow Pack 1.33 kg AMPREG21 R/H SLOW 1.33KG PACK F121-031 SPECIALIST
Extra-slow Pack 3.6 kg AMPREG21 R/H EXT-SLOW 3.6KG PACK F121-014 SPECIALIST
Individual resin component size
Resin 1000 kg AMPREG21 RESIN 1000KG
F121-016 SPECIALIST
Resin 216 kg AMPREG21 RESIN 216KG F121-015 SPECIALIST
Resin 20 kg AMPREG21 RESIN 20KG F121-002 SPECIALIST
Resin 10 kg AMPREG21 RESIN 10KG F121-034 SPECIALIST
Resin 2.7 kg AMPREG21 RESIN 2.7KG F121-001 SPECIALIST
Use the mix ratio to select recommended hardener component size
Fast 165 kg AMPREG21 HARD FAST 165KG
100:33 (parts by weight)
F121-021 SPECIALIST
Fast 18 kg AMPREG21 HARD FAST 18KG F121-017 SPECIALIST
Fast 18 kg AMPREG21 HARD FAST 18KG A/F F121-056 SPECIALIST
Fast 6.66 kg AMPREG21 HARD FAST 6.66KG F121-004 SPECIALIST
Fast 3.33 kg AMPREG21 HARD FAST 3.33KG F121-035 SPECIALIST
Standard 165 kg AMPREG21 HARD STD 165KG
100:33 (parts by weight)
F121-022 SPECIALIST
Standard 18 kg AMPREG21 HARD STD 18KG F121-018 SPECIALIST
Standard 6.66 kg AMPREG21 HARD STD 6.66KG F121-006 SPECIALIST
Standard 3.33 kg AMPREG21 HARD STD 3.33KG F121-036 SPECIALIST
Slow 165 kg AMPREG21 HARD SLOW 165KG
100:33 (parts by weight)
F121-023 SPECIALIST
Slow 18 kg AMPREG21 HARD SLOW 18KG F121-019 SPECIALIST
Slow 18 kg AMPREG21 HARD SLOW 18KG A/F F121-060 SPECIALIST
Slow 6.66 kg AMPREG21 HARD SLOW 6.66KG F121-008 SPECIALIST
Slow 3.33 kg AMPREG21 HARD SLOW 3.33KG F121-037 SPECIALIST
Extra-slow 165 kg AMPREG21 HARD EXT-SLOW 165KG 100:33
(parts by weight)
F121-024 SPECIALIST
Extra-slow 18 kg AMPREG21 HARD EXT-SLOW 18KG F121-020 SPECIALIST
Extra-slow 6.66 kg AMPREG21 HARD EXT-SLOW 6.66KG F121-010 SPECIALIST
Ampreg 22 Size Units Description Mix Ratio (R:H) Order Code Availability
Resin and hardener pack sizes
Fast Pack 4.23 kg AMPREG22 R/H FAST 4.23KG PACK
F118-020 AU
Standard Pack 5 x 1 kg AMPREG22 R/H STD 5x1KG PACK F118-059 SPECIALIST
Standard Pack 4.23 kg AMPREG22 R/H STD 4.23KG PACK F118-048 SPECIALIST
Standard Pack 4.23 kg AMPREG22 R/H STD CLEAR 4.23KG PACK F118-083 SPECIALIST
Standard Pack 1 kg AMPREG22 R/H STD 1KG PACK BOXED F118-072 SPECIALIST
Slow Pack 4.23 kg AMPREG22 R/H SLOW 4.23KG PACK F118-037 AU
GuritAU/NZ/SEAProductCatalogue 47 GPC-APAC-29-1117
Individual resin component size
Resin 1000 kg AMPREG22 RESIN 1000KG
F118-009 SPECIALIST
Resin 193 kg AMPREG22 RESIN 193KG F118-063 AU/NZ
Resin 20 kg AMPREG22 RESIN 20KG F118-061 AU/NZ
Resin 10 kg AMPREG22 RESIN 10KG F118-006 SPECIALIST
Use the mix ratio to select recommended hardener component size
Fast 900 kg AMPREG22 HARD FAST 900KG
100:28 (by weight)
F118-030 SPECIALIST
Fast 180 kg AMPREG22 HARD FAST 180KG F118-018 AU/NZ
Fast 18 kg AMPREG22 HARD FAST 18KG F118-062 AU/NZ
Fast 5.6 kg AMPREG22 HARD FAST 5.6KG F118-073 AU/NZ
Fast 2.8 kg AMPREG22 HARD FAST 2.8KG F118-012 SPECIALIST
Standard 900 kg AMPREG22 HARD STD 900KG
100:28 (by weight)
F118-050 SPECIALIST
Standard 180 kg AMPREG22 HARD STD 180KG F118-042 AU/NZ
Standard 18 kg AMPREG22 HARD STD 18KG F118-066 AU/NZ
Standard 5.6 kg AMPREG22 HARD STD 5.6KG F118-074 AU/NZ
Standard 2.8 kg AMPREG22 HARD STD 2.8KG F118-039 SPECIALIST
Slow 900 kg AMPREG22 HARD SLOW 900KG
100:28 (by weight)
F118-051 SPECIALIST
Slow 180 kg AMPREG22 HARD SLOW 180KG F118-036 AU/NZ
Slow 18 kg AMPREG22 HARD SLOW 18KG F118-065 AU/NZ
Slow 5.6 kg AMPREG22 HARD SLOW 5.6KG F118-075 AU/NZ
Slow 5.66 kg AMPREG22 HARD SLOW 5.6KG A/F F118-085 SPECIALIST
Slow 2.8 kg AMPREG22 HARD SLOW 2.8KG F118-033 SPECIALIST
Extra-slow 900 kg AMPREG22 HARD EXT-SLOW 900KG
100:28 (by weight)
F118-031 SPECIALIST
Extra-slow 180 kg AMPREG22 HARD EXT-SLOW 180KG F118-019 AU/NZ
Extra-slow 18 kg AMPREG22 HARD EXT-SLOW 18KG F118-064 AU/NZ
Extra-slow 5.6 kg AMPREG22 HARD EXT-SLOW 5.6KG F118-076 AU/NZ
Extra-slow 2.8 kg AMPREG22 HARD EXT-SLOW 2.8KG F118-068 SPECIALIST
AU/NZ = stocked product
AU = stocked in Australia only
NZ = stocked in New Zealand only
SPECIALIST = please contact your local customer support team for product availability
For indicative purposes only, product availability subject to change at any time. Please contact Gurit Customer Service team for further information.
GuritAU/NZ/SEAProductCatalogue 48 GPC-APAC-29-1117
Ampreg 26 Size Units Description Mix Ratio (R:H) Order Code Availability
Resin and hardener pack sizes
Fast Pack 6.67 kg AMPREG26 R/H FAST 6.67KG PACK
F116-033 SPECIALIST
Slow Pack 6.67 kg AMPREG26 R/H SLOW 6.67KG PACK F116-034 SPECIALIST
Individual resin component size
Resin 216 kg AMPREG26 RESIN 216KG
F116-036 SPECIALIST
Resin 20 kg AMPREG26 RESIN 20KG F116-035 SPECIALIST
Use the mix ratio to select recommended hardener component size
Fast 18 kg AMPREG26 HARD FAST 18KG
100:33 (by weight)
F116-037 SPECIALIST
Fast 18 kg AMPREG26 HARD FAST 18KG A/F F116-043 SPECIALIST
Fast 6.66 kg AMPREG26 HARD FAST 6.66KG F116-039 SPECIALIST
Fast 6.66 kg AMPREG26 HARD FAST 6.66KG A/F F116-042 SPECIALIST
Slow 180 kg AMPREG26 HARD SLOW 180KG
100:33 (by weight)
F116-030 SPECIALIST
Slow 18 kg AMPREG26 HARD SLOW 18KG F116-038 SPECIALIST
Slow 18 kg AMPREG26 HARD SLOW 18KG A/F F116-044 SPECIALIST
Slow 6.66 kg AMPREG26 HARD SLOW 6.66KG F116-040 SPECIALIST
Slow 6.66 kg AMPREG26 HARD SLOW 6.66KG A/F F116-041 SPECIALIST
Foaming Epoxy System
F 230-1 Size Units Description Mix Ratio (R:H) Order Code Availability
Resin and hardener pack sizes
Resin 14.5 kg AMPREG F230-1 RESIN 14.5KG F113-007 AU
Individual resin component size
Slow Pack 3.53 kg AMPREG F230-1 HARD SLOW 3.53KG PACK A/F
100:23 (by weight) F113-008 AU
Ampreg Thixotropic Pregel
Ampreg TP Size Units Description Mix Ratio (R:H) Order Code Availability
Resin 193 kg AMPREG TP RESIN 193KG Refer to product datasheet. Compatible systems: ¬ Ampreg 21 ¬ Ampreg 22 ¬ Ampreg 26
F120-009 SPECIALIST
Resin 20 kg AMPREG TP RESIN 20KG F120-008 SPECIALIST
Ampreg Adhesion Promoter
Ampreg TP Size Units Description Mix Ratio (R:H) Order Code Availability
Pack kg AMPREG ADHESION PROMOTER 20KG 100:28 (by weight) F119-002 SPECIALIST
AU/NZ = stocked product
AU = stocked in Australia only
NZ = stocked in New Zealand only
SPECIALIST = please contact your local customer support team for product availability
For indicative purposes only, product availability subject to change at any time. Please contact Gurit Customer Service team for further information.
GuritAU/NZ/SEAProductCatalogue 49 GPC-APAC-29-1117
Infusion Systems
The PRIME™ infusion system from Gurit has been used successfully for the single-operation moulding of components ranging from narrow carbon yacht masts, up to 80' yacht hulls and wind turbine blades. PRIME™ infusion resin has a much reduced viscosity and longer working time, which makes it ideal for infusing very large parts with complex reinforcements in one operation.
PRIME™ epoxy infusion systems are at the forefront of the development of liquid epoxies for "under the bag" infusion processes, such as SCRIMP™, RIFT (resin infusion under flexible tooling), and VARTM (vacuum assisted resin transfer moulding).
Product Selector
System Description Hardener Speed Mix ratio Intended Application
PRIME™ 27
Low viscosity, good mechanical properties, very low exotherm in thick sections
Fast 20 mins 100:28
(parts by weight) Suitable for the female moulding of large complex components
Slow 1 hr
Extra Slow 4 hrs
High Tg
3 hrs 20 mins 100:25
(parts by weight)
GuritAU/NZ/SEAProductCatalogue 50 GPC-APAC-29-1117
Code Selector
Infusion Systems
Prime™ 27 Size Units Description Mix Ratio (R:H) Order Code Availability
Individual resin component size
Resin 1000 kg PRIME27 RESIN 1000KG
F160-043 SPECIALIST
Resin 214 kg PRIME27 RESIN 214KG F160-041 AU/NZ Resin 18.6 kg PRIME27 RESIN 18.6KG F160-057 AU/NZ
Use the mix ratio to select recommended hardener component size
Fast 900 kg PRIME HARD FAST 900KG
100:28 (by weight)
F160-072 SPECIALIST
Fast 180 kg PRIME HARD FAST 180KG F160-018 SPECIALIST
Fast 19 kg PRIME HARD FAST 19KG F160-068 AU
Fast 5.2 kg PRIME HARD FAST 5.2KG F160-053 AU
Slow 900 kg PRIME HARD SLOW 900KG
100:28 (by weight)
F160-045 SPECIALIST
Slow 180 kg PRIME HARD SLOW 180KG F160-032 SPECIALIST
Slow 19 kg PRIME HARD SLOW 19KG F160-069 AU/NZ Slow 5.2 kg PRIME HARD SLOW 5.2KG F160-054 AU/NZ
Extra-slow 900 kg PRIME HARD EX-SLOW 900KG
100:28 (by weight)
F160-033 SPECIALIST
Extra-slow 180 kg PRIME HARD EX-SLOW 180KG F160-028 SPECIALIST
Extra-slow 19 kg PRIME HARD EX-SLOW 19KG F160-070 SPECIALIST
Extra-slow 5.2 kg PRIME HARD EX-SLOW 5.2KG F160-055 SPECIALIST
High Tg 178 kg PRIME HIGH Tg HARDENER 178KG 100:25
(by weight)
F160-089 SPECIALIST
High Tg 17.6 kg PRIME HIGH Tg HARDENER 17.6KG F160-088 SPECIALIST
High Tg 8.8 kg PRIME HIGH Tg HARDENER 8.8KG F160-087 SPECIALIST
ULV Slow 13.95 kg PRIME ULV HARD SLOW 13.95KG 100:28 (by weight)
F160-074 SPECIALIST
ULV Slow 3.8 kg PRIME ULV HARD SLOW 3.8KG F160-075 SPECIALIST
AU/NZ = stocked product
AU = stocked in Australia only
NZ = stocked in New Zealand only
SPECIALIST = please contact your local customer support team for product availability
For indicative purposes only, product availability subject to change at any time. Please contact Gurit Customer Service team for further information.
GuritAU/NZ/SEAProductCatalogue 51 GPC-APAC-29-1117
RTM System
PRIME™ 180 High Tg Resin RTM System
PRIME™ 180 is a two-component toughened epoxy system specifically developed for RTM production of high-quality structural carbon components such as wheel rims, tubs, and structural parts. Low viscosity at low temperatures enables convenient manufacture of complex or thick section laminates. Following a post cure to 180°C, PRIME™ 180 features a good level of clarity which allows for carbon cosmetic finishes to be achieved directly from moulding. Coated with UV-resistant lacquer ensures long-term UV stability of the finished parts where required.
Code Selector
PRIME™ 180 Size Units Description Mix Ratio (R:H) Order Code Availability
Resin 200 kg PRIME180 RESIN 200KG 1:1 (by weight)
F168-002 SPECIALIST
Resin 20 kg PRIME180 RESIN 20KG F168-001 SPECIALIST
Hardener 200 kg PRIME180 HARDENER 200KG
F168-004 SPECIALIST
Hardener 20 kg PRIME180 HARDENER 20KG F168-003 SPECIALIST
AU/NZ = stocked product
AU = stocked in Australia only
NZ = stocked in New Zealand only
SPECIALIST = please contact your local customer support team for product availability
For indicative purposes only, product availability subject to change at any time. Please contact Gurit Customer Service team for further information.
GuritAU/NZ/SEAProductCatalogue 52 GPC-APAC-29-1117
Multi-Purpose Systems
The Ampreg wet laminating range consists of standard, commonly used laminating products, as well as systems with higher strengths and operating temperatures. A complete range of hardeners and modifiers give a wide variety of working times, viscosities and thixotropy.
Product Selector
System Description Hardener Speed Mix ratio Intended Application
Handipack
Multi-purpose epoxy, supplied only in a small pack. It is designed for quick repair work and small scale construction jobs.
Handipack 15 mins 100:50
(parts by volume)
Laminating, coating or as an adhesive or filling compound.
SP 106
All-purpose epoxy which can be used for gluing, coating, laminating and filling
Fast 15 mins
100:18 (parts by weight)
Clear coating for wood and other substrates, or for laminating.
Slow 20 mins
Extra Slow 35 mins
SP 115 Low viscosity, UV stable high clarity laminating system
115 30 mins 100:33
(parts by weight)
Surfboards, Clear parts
SP 320
Solvent-free, clear epoxy coating that provides a high clarity, tough finish to whatever it is applied to.
Fast 15 mins 100:33
(parts by weight)
Coating wood to provide a depth of clarity that can only otherwise be achieved with many more coats of a conventional varnish.
Slow 30 mins
Eposeal 300
Solvent-based, low viscosity epoxy primer with an extremely low viscosity which ensures that the product achieves rapid and deep penetration of porous surfaces.
EP 300 - 100:30 (by weight)
Developed primarily for use on wood but can also be used on other materials such as GRP, stone, ferrocement, brick, etc.
GuritAU/NZ/SEAProductCatalogue 53 GPC-APAC-29-1117
Code Selector
Handipack Multi-purpose Epoxy System Handipack Size Units Description Mix Ratio (R:H) Order Code Availability
Resin 10 litres HANDIPACK R/H+PUMPS 375ml, BOX OF 5 2:1 (by volume) F520-011 SPECIALIST
SP106 Multi-purpose Epoxy System SP 106 Size Units Description Mix Ratio (R:H) Order Code Availability
Resin and hardener pack sizes
Fast Pack 3.02 kg SP106 RES/HARD FAST 3.02KG PACK
F510-041 NZ
Fast Pack 5 x 1 kg SP106 RES/HARD FAST 5x1KGPACK F510-037 SPECIALIST
Slow Pack 3.02 kg SP106 RES/HARD SLOW 3.02KG PACK F510-042 NZ
Slow Pack 5 x 1 kg SP106 RES/HARD SLOW 5x1KGPACK F510-038 SPECIALIST
Individual resin component size
Resin 1000 kg SP106 RESIN 1000KG
F510-034 SPECIALIST
Resin 216 kg SP106 RESIN 216KG F510-008 NZ
Resin 20 kg SP106 RESIN 20KG F510-051 NZ
Resin 10 kg SP106 RESIN 10.0KG F510-004 SPECIALIST
Use the mix ratio to select recommended hardener component size
Fast 19.5 kg SP106 HARD FAST 19.5KG
5:1 (by volume)
F510-020 SPECIALIST
Fast 3.6 kg SP106 HARD FAST 3.6KG F510-018 NZ
Fast 1.8 kg SP106 HARD FAST 1.8 KG (0.9x2) F510-019 SPECIALIST
Slow 180 kg SP106 HARD SLOW 180KG
5:1 (by volume)
F510-033 SPECIALIST
Slow 19.5 kg SP106 HARD SLOW 19.5KG F510-032 NZ
Slow 3.6 kg SP106 HARD SLOW 3.6KG F510-053 NZ
Slow 1.8 kg SP106 HARD SLOW 1.8KG (0.9x2) F510-031 NZ
Extra-slow 19.5 kg SP106 HARD EXTRA-SLOW 19.5KG 5:1 (by volume)
F510-047 SPECIALIST
Extra-slow 3.6 kg SP106 HARD EXTRA-SLOW 3.6KG F510-052 SPECIALIST
SP115 UV Stable, High Clarity Epoxy System SP 115 Size Units Description Mix Ratio (R:H) Order Code Availability
Resin and hardener pack sizes
Pack 5 x 1 kg SP115 RES/HARD BOX 5x1KG PACK
F110-017 SPECIALIST
Pack 5 kg SP115 RESIN/HARD 5KG PACK F110-020 AU
Individual resin component size
Resin 198 kg SP115 RESIN 198KG
F110-024 SPECIALIST
Resin 20 kg SP115 RESIN 20.0KG F110-023 AU
Use the mix ratio to select recommended hardener component size
Hardener 16.5 kg SP115 HARD 16.5KG 100:33 (by weight)
F110-025 SPECIALIST
Hardener 6.66 kg SP115 HARD 6.66KG F110-026 AU
GuritAU/NZ/SEAProductCatalogue 54 GPC-APAC-29-1117
SP 320 Multi-purpose Epoxy Coating System
SP 320 Size Units Description Mix Ratio (R:H) Order Code Availability
1. Available resin and hardener pack sizes
Pack 5 x 1 kg SP320 RES/HARD FAST 5x1KGPACK
F505-024 SPECIALIST
Pack 5 x 1 kg SP320 RES/HARD SLOW 5x1KGPACK F505-025 SPECIALIST
Pack 4 kg SP320 RESIN/HARD FAST 4KG PACK F505-028 SPECIALIST
Pack 4 kg SP320 RESIN/HARD SLOW 4KG PACK F505-029 SPECIALIST
Individual resin component size
Resin 20 kg SP320 RESIN 20KG F505-035 SPECIALIST
Use the mix ratio to select recommended hardener component size
Hardener 6.66 kg SP320 HARD FAST 6.66KG 100:33 (by weight)
F505-038 SPECIALIST
Hardener 6.66 kg SP320 HARD SLOW 6.66KG F505-039 SPECIALIST
SP 300 Wood Coating
SP 300 Size Units Description Mix Ratio (R:H) Order Code Availability
Pack 5 x 1 litres SP300 EPOSEAL RES&HARD 5x1L PACKS 100:30 (by weight)
F705-013 SPECIALIST
Pack 5 litres SP300 EPOSEAL RES&HARD 5L PACK F705-012 SPECIALIST
GuritAU/NZ/SEAProductCatalogue 55 GPC-APAC-29-1117
Filling and Fairing
Gurit’s filling and fairing systems for the finishing of component manufacture, offer a range of working times, good sandability and compatibility with a wide range of primers. S-Fill 15 Minute Epoxy Filler System Gurit’s S’Fill 15 Minute Filler is an epoxy filler system designed for rapid cure at ambient temperature, to allow sanding without clogging at just over an hour after application. As well as rapid cure and good sandability, the system has been developed to offer ease of dispense and mixing, good sag resistance during application, good cured properties. The system offers a simple 1:1 mix ratio, high levels of adhesion, low shrinkage and good thermal and mechanical properties.
S-Fair 600 Epoxy Fairing System S-Fair 600 is a simple 1:1 by volume, two component filler designed for filling and fairing large composite and metal structures such as hulls and decks. It can be applied up to a thickness of 35mm on a vertical surface. It is easy to sand and is compatible with a wide range of primers and top coats typically used in the marine market for the finishing of yachts. It is available with two hardeners; Fast and Standard, which enables the customer to tailor the working/cure time to the ambient workshop temperature.
Code Selector S-Fill 15 Minute Epoxy Filler System
S-Fill 15 Min Size Units Description Mix Ratio (R:H) Order Code Availability
Pack 2 litres S FILL 15 MIN. RES&HARD 2L PACK F930-006 SPECIALIST
S-Fair 600 Size Units Description Mix Ratio (R:H) Order Code Availability
Individual resin component size
Resin 10 litres S FAIR 600 RESIN 10L
F920-003 SPECIALIST
Resin 2.5 litres S FAIR 600 RESIN 2.5L F920-001 SPECIALIST
Use the mix ratio to select recommended hardener component size
Fast 10 litres S FAIR 600 FAST HARDENER 10L 1:1 (by volume)
F920-110 SPECIALIST
Fast 2.5 litres S FAIR 600 FAST HARDENER 2.5L F920-111 SPECIALIST
Standard 10 litres S FAIR 600 STD HARDENER 10L 1:1 (by volume)
F920-004 SPECIALIST
Standard 2.5 litres S FAIR 600 STD HARDENER 2.5L F920-002 SPECIALIST
AU/NZ = stocked product
AU = stocked in Australia only
NZ = stocked in New Zealand only
SPECIALIST = please contact your local customer support team for product availability
For indicative purposes only, product availability subject to change at any time. Please contact Gurit Customer Service team for further information.
GuritAU/NZ/SEAProductCatalogue 56 GPC-APAC-29-1117
Tooling Products
As the technical leaders in commercial composite materials, Gurit offers a complete range of composite tooling products.
Gurit's tooling product range consists of a tooling paste designed for pattern manufacture and a range of ambient curing mould materials that can be used up to an operating temperature of 160°C.
Product Selector
Type Product Operating Temperature Description
Tooling Pastes T-Paste 70-2 130°C
T-Paste 70-2 has been designed for customers looking for a fast and reliable way to manufacture patterns and direct moulds. T-Paste 70-2 combined with CNC technology allows more design freedom and improves pattern/direct mould accuracy whilst reducing production processes.
Please note: A mixing machine is required to mix and dispense the T-Paste 70-2 product. For more information on suitable mixing machines, please contact Gurit.
Gelcoats T-Gel 130-1 130°C
T-Gel 130-1 is an epoxy gelcoat system for manufacturing glass or carbon reinforced mould tools. T-Gel 130-1 is compatible with Gurit’s range of 130⁰C / 265⁰F tooling laminating, infusion and repair materials.
Laminating Systems T-Lam 130-1 130°C
T-Lam 130-1 is an epoxy tooling system designed for wet laminating glass or carbon moulds. T-Lam 130-1 is compatible with T-Prime 130-1.
Infusion Resin T-Prime 130 130°C T-Prime 130-1 is a low viscosity epoxy tooling system for manufacturing infused glass and carbon moulds. It is compatible with T-Lam 130-1 laminating.
Infusion Resin T-Prime 160 160°C T-Prime 160 is a low viscosity epoxy tooling system for manufacturing infused glass and carbon moulds.
GuritAU/NZ/SEAProductCatalogue 57 GPC-APAC-29-1117
Code Selector
Tooling Pastes
T-Paste 70-2 Size Units Description Mix Ratio (R:H) Order Code Availability
Resin 190 litres T-PASTE 70-2 RESIN 190L 100:100 (by volume)
F940-122 SPECIALIST Hardener 190 litres T-PASTE 70-2 HARDENER 190L F940-123 SPECIALIST
Please note: A mixing machine is required to mix and dispense the T-Paste 70-2 product. For more information on suitable mixing machines, please contact Gurit.
Gelcoats
Laminating Systems
T-Lam 130-1 Size Units Description Mix Ratio (R:H) Order Code Availability
Resin 20 kg T-LAM 130-1 RESIN 20KG 100:40 (by weight)
F140-202 SPECIALIST
Hardener 8 kg T-LAM 130-1 HARDENER 8KG A/F F140-205 SPECIALIST
Infusion Systems
T-Prime 130-1 Size Units Description Mix Ratio (R:H) Order Code Availability
Individual resin component size
Resin 185 kg T-PRIME 130-1 RESIN 185KG
F163-100 SPECIALIST
Resin 12.5 kg T-PRIME 130-1 RESIN 12.5KG F163-102 SPECIALIST
Use the mix ratio to select recommended hardener component size
Hardener 16.7 kg T-PRIME 130-1 HARD 16.7KG 100:27 (by weight)
F163-106 SPECIALIST
Hardener 3.4 kg T-PRIME 130-1 HARD 3.4KG F163-103 SPECIALIST
T-Prime 160 Size Units Description Mix Ratio (R:H) Order Code Availability
Individual resin component size
Resin 200 kg T-PRIME 160 RESIN 200KG
F166-003 SPECIALIST
Resin 20 kg T-PRIME 160 RESIN 20KG F166-005 SPECIALIST
Use the mix ratio to select recommended hardener component size
Hardener 180 kg T-PRIME 160 HARDENER 180KG 100:35 (by weight)
F166-009 SPECIALIST
Hardener 17.5 kg T-PRIME 160 HARD 17.5KG A/F F166-008 SPECIALIST
T-Gel 130-1 Size Units Description Mix Ratio (R:H) Order Code Availability
Pack 7.6 kg T-GEL130-1 RES&HARD 7.6KG PACK F340-112 SPECIALIST
GuritAU/NZ/SEAProductCatalogue 58 GPC-APAC-29-1117
Coatings
Gurit’s range of coating epoxies is the foundation of our formulated products business. First developed in the early 1980's, specifically to meet the needs of the wooden boat builder/restorer, Gurit's comprehensive range of products is as popular today as when it was first introduced.
Our coating products are hard wearing and versatile partners for the multi-purpose systems. Available in both solvent and solvent-free formulations, coatings are suitable for a range of applications, including osmosis treatment, priming, top coating and varnishing.
Product Selector
Type Product Description
In-mould Process Coat CR 3400
CR 3400 is an in-mould epoxy surfacing system for epoxy laminates and is designed to be used as the base for the subsequent application of a paint scheme. CR 3400 is therefore formulated to be easy to sand so that once released, the CR 3400 surface can be readily keyed prior to the application of the paint system. The product has a considerably longer over-coating window than other gelcoats - up to one day with Standard hardener at 20°C.
Code Selector In-mould Process Coat
CR 3400 Size Units Description Mix Ratio (R:H) Order Code Availability
Resin 19 kg CR3400 RESIN 19KG 100:30 (by weight)
F346-013 SPECIALIST
Hardener 5.7 kg CR3400 HARD STD 5.7KG F346-015 SPECIALIST
AU/NZ = stocked product
AU = stocked in Australia only
NZ = stocked in New Zealand only
SPECIALIST = please contact your local customer support team for product availability
For indicative purposes only, product availability subject to change at any time. Please contact Gurit Customer Service team for further information.
GuritAU/NZ/SEAProductCatalogue 59 GPC-APAC-29-1117
Reinforcements
Gurit supplies an extensive range of reinforcements suitable for composite component manufacture and repair. These materials are based on the most widely used fibre types and fibre orientations and incorporate a variety of construction techniques in their manufacture.
Our range of Reinforcements is presented by fibre type:
¬ Glass Products – E Glass
¬ Carbon Products
¬ Hybrid combinations of the above fibres
Then sub-divided into the following categories, based on the orientations of the primary structural fibres / tows :
¬ Unidirectional Fabrics – A variety of construction styles with all structural fibres generally running at 0° where optimum mechanical properties or local reinforcement is required. The Style is generally Unitex (‘UT’) which offers a balance of handling properties.
¬ Woven Fabrics – A wide range of woven fabrics, available in plain, twill and satin weave formations with fibres at 0°/90°.
¬ Multiaxial Fabrics – Stitched construction with fibres at +/-45° or 0°/90° (Double Bias), 0°/+45°/-45° (Triaxial) and 0°/+45°/-45°/90° (Quadraxial). These products offer excellent mechanical properties, and have optimised fibre spread for high laminate quality.
¬ Tapes – Narrow (< 200mm) fabric versions of the above
Availability...............................................................................................................................................................................60
Reinforcement Nomenclature..............................................................................................................................................60
E-Glass Products...................................................................................................................................................................61
Chopped Strand Mat.............................................................................................................................................................63
Carbon Products....................................................................................................................................................................63
Aramid Products.....................................................................................................................................................................64
GuritAU/NZ/SEAProductCatalogue 60 GPC-APAC-29-1117
Availability The supply of dry reinforcements is subject to a minimum single roll quantity per style for most items. Smaller quantities of fabric are available from Gurit’s network of distributors, subject to cutting and handling charges.
This catalogue describes Gurit’s standard range of reinforcement materials. If your preferred reinforcement is not listed in the following pages, please contact Gurit, as we can offer alternative weaves, weights, fibres and fibre combinations in most styles. Non-standard items may be subject to limited availability. Width availability may change from time to time.
For further information, confirmation of stock levels and technical advice on Gurit’s reinforcement materials - please contact your local Customer Support Team.
Reinforcement Nomenclature 1st Letter:
General Construction of Reinforcement Fabric
WR = Woven rovings - (glass)
R = Woven fabric - yarn (glass) or tows (carbon)
X = Double bias (±45°) stitched fabric
Q = Quadraxial (0°/90°/±45°) stitched fabric
Y = Triaxial (0°/±45°) stitched fabric
UT = Unitex woven low-crimp unidirectional fabric
UF = Unifibre non-woven unidirectional fabric
2nd Letter: Fibre Type (or Major Component in Hybrid)
E = E glass
S = S glass (or R glass)
C = Carbon
3rd letter:
2nd Fibre Type - Minor Component in Hybrid (as above);
also: (when present) T = Tape version
Final digit: Identifier to distinguish otherwise similar fabrics.
Suffix letter: For woven fabrics, the following suffixes indicate the weave:
P = Plain
T = 2x2 twill
S = 3x1 twill
T4 = 4x4 twill
Hx = Satin (where x = harness number)
C = Crowsfoot
B = Basket
Q = Quadran
Example:
UT-C300/500
UD carbon in Unitex
Nominal weight 300g/m2
Width 500mm
GuritAU/NZ/SEAProductCatalogue 61 GPC-APAC-29-1117
Code Selector E-Glass Products Description Width (mm) Length (lm) Quantity (m2) Order Units Order Code Availability
Uni-directional Reinforcement Fabrics
UT-E250 500 200 100 m2 R161-015 NZ
UT-E500 500 100 50 m2 R161-021 AU/NZ
UE851-100 100 60 6 m2 4173 AU/NZ
UE851-150 150 50.2 7.53 m2 4174 AU/NZ
UE850-1270 1270 44 55.8 m2 4181 NZ
0/90° Woven Yarn
RE86P 1050 105 110.25 m2 R111-008 AU/NZ
RE165T 1270 105 133.35 m2 R111-203 AU/NZ
RE200 1020 100 102 m2 4040 AU/NZ
RE295H4 1240 105 130 m2 R111-113 AU
RE301H8D 1270 100 127 m2 R111-117 AU
RE290 1020 100 102 m2 4070 NZ
0/90° Woven Roving Yarn
WRE601-1270 1270 65.6 83.3 m2 4686 NZ
WRE801-1270 1270 49.2 62.5 m2 4687 NZ
±45° Double Bias Stitched Fabrics
XE150 1270 100 127 m2 R121-003-3 NZ XE210 1270 100 127 m2 R121-003-2 AU XE256 1270 100 127 m2 R121-003-1 AU
XE304 1270 100 127 m2 R121-190 AU/NZ
XE415-1270 1270 94.8 120.35 m2 4360 AU/NZ
XE625-1270 1270 63 80 m2 4400B AU/NZ XE825-1270 1270 38.2 48.48 m2 4430 AU/NZ With CSM Backing
XE435M225-1270 1270 52 66 m2 4490 AU/NZ
XE602M225-1270 1270 47.1 59.85 m2 4540 AU/NZ XE800M225-1270 1270 30.7 39.04 m2 4530 NZ /±45° Double Bias Stitched Tapes
XE415-100 100 94.8 9.5 lm 4363 NZ
XE415-150 150 94.8 14.2 lm 4366 NZ XE415-200 200 94.8 19 lm 4364 NZ XE625-100 100 63 6.3 lm 4403B NZ XE625-150 150 63 9.45 lm 4406B NZ
XE625-200 200 63 12.6 lm 4409B NZ
XE820-100 100 38.2 3.8 lm 4433 NZ
XE820-150 150 38.2 5.7 lm 4436 NZ XE820-200 200 38.2 7.6 lm 4438 NZ
GuritAU/NZ/SEAProductCatalogue 62 GPC-APAC-29-1117
Description Width (mm) Length (lm) Quantity (m2) Order Units Order Code Availability
/±45° Double Bias Stitched Tapes cont’d
With CSM Backing
XE602M225-100 100 47.1 4.71 lm 4543 NZ XE602M225-150 150 47.1 7.07 lm 4546 NZ
0/90° Biaxial Stitched Fabric
BE453-1270 1270 80 101.6 m2 R141-006-1 AU/NZ BE615-1270 1270 51.2 65.04 m2 4215 AU/NZ
BE825-1270 1270 47.6 60.5 m2 4235 NZ With CSM Backing
BE630M225-1270 1270 45.4 57.65 m2 4263 NZ
BE825M225-1270 1270 37.4 47.5 m2 4283 NZ
0°/±45° Triaxial Stitched Fabric
YE810U-1270 1270 38.9 49.4 m2 4628 NZ
ZE920U-1270 1270 34.3 43.56 m2 4615 NZ
0°/90°/±45° Quadraxial Stitched Fabric
QE610-1270 1270 51.9 65.88 m2 4655 AU/NZ
QE851-1270 1270 46.3 58.8 m2 4661 AU/NZ QE1178-1270 1270 33.4 42.4 m2 4674 AU/NZ
Matline
Description Width (mm) Length (lm) Quantity (m2) Order Units Order Code Availability
M200-1000 1000 80 80 m2 3692 NZ
M300-1000 1000 50 50 m2 3693 NZ
M500-1000 1000 30 30 m2 3695 NZ
AU/NZ = stocked product AU = stocked in Australia only NZ = stocked in New Zealand only
SPECIALIST = please contact your local customer support team for product availability
GuritAU/NZ/SEAProductCatalogue 63 GPC-APAC-29-1117
Carbon Products Description Width (mm) Length (lm) Quantity (m2) Order Units Order Code Availability
Uni-directional Reinforcement Fabrics
UT-C200 500 150 75 m2 R163-039 AU/NZ
UT-C300 500 125 62.5 m2 R163-040 AU/NZ
UT-C450 500 100 50 m2 R163-064 AU/NZ
Unidirectional Reinforcement Tapes
Non-crimp plain weave type (Unix) in carbon. Typical uses for these tapes are in the local reinforcement of predominantly glass composite structures, where the load paths are known.
RUCT170-65 65 50 3.25 Roll R163-006-2 AU
RUCT480-100 100 50 5 Roll 6353G AU
0/90° Woven Reinforcements
Gurit reserves the right to interchange 1000mm & 1270mm based upon availability Woven fabrics produced from HSC.
RC155T 1000 100 100 m2 R113-001-3 AU/NZ
RC155T 1200 100 120 m2 R113-001-4 AU
RC200T 1270 100 127 m2 R113-013-3 AU/NZ
RC200P 1270 100 127 m2 R113-007-9 AU/NZ
RC200(WS)T 1270 100 127 m2 R113-013-5 AU
RC241T 1200 100 120 m2 R113-013-7 AU/NZ
RC600T 1000 50 50 m2 6295 AU
±45° Double Bias Stitched Fabrics
XC101 1270 100 127 m2 R123-100-3 AU/NZ
XC151 1270 100 127 m2 R123-100-2 AU/NZ
XC302 1270 100 127 m2 R123-060 AU/NZ
XC411 1270 100 127 m2 6251A AU/NZ
Chopped Strand Mat Description Width (mm) Length (lm) Quantity (kg) Order Units Order Code Availability
CSM225-E-1040 1040 128.2 30 kg 4721 NZ
CSM300-P-1040 1040 96.15 30 kg 4738 NZ
CSM300-E-1040 1040 96.15 30 kg 4737 NZ
CSM450-E-1040 1040 64.1 30 kg 4747 NZ
CSM450-P-1040 1040 64.1 30 kg 4752 NZ
CSM600-P-1270 1270 45.9 35 kg 4765 NZ
GuritAU/NZ/SEAProductCatalogue 64 GPC-APAC-29-1117
Description Width (mm) Length (lm) Quantity (m2) Order Units Order Code Availability
Carbon Braided Sox
CSOX255-50 50 lm 6405 NZ
CSOX280-25 25 lm 6410 NZ
±45° Carbon Double Bias Stitched Tapes
XC 411-100 100 100 10 Roll 6252A NZ
XC 411-150 150 100 15 Roll 6249A NZ
Aramid Products Description Width (mm) Length (lm) Quantity (m2) Order Units Order Code Availability
0/90° Woven
RA175P-1270 1270 50 63.5 m2 R112-003-2 NZ
RA320HS-1270 1270 50 63.5 m2 6141 NZ
AU/NZ = stocked product
AU = stocked in Australia only
NZ = stocked in New Zealand only
SPECIALIST = please contact your local customer support team for product availability
For indicative purposes only, product availability subject to change at any time. Please contact Gurit Customer Service team for further information.
GuritAU/NZ/SEAProductCatalogue 65 GPC-APAC-29-1117
Ancillary Products
In order to assist in the use of the wide range of materials manufactured and supplied by Gurit, a range of Ancillary Products are also available. These have been refined over many years to enable users to handle products safely and to obtain the very best results from Gurit materials. The Ancillary Products are grouped together into three main categories:
Filler Powders A range of filler powders which are designed to modify the properties of some of the Gurit liquid solvent-free resin systems, and so create resin mixes for use as fillers and adhesives. The fillers form three distinct categories: hollow spheres, short fibres, and flow modifiers.
Hollow spheres Increase the volume and reduce the density of any resin system and are used to make adhesive mixes and filling & fairing mixes.
¬ Microballoons: Brown microsphere filler powder used to make glues or paste fillers.
¬ Glass Bubbles: White microsphere filler powder used to make glues or paste fillers.
Short Fibres For adding strength to a resin and hardener mix used as a structural adhesive, short reinforcing fibres are often added which act in a similar strengthening way to the long reinforcing fibres used in composite construction.
¬ Microfibres: Cellulose fibres used to make adhesive mixes.
Flow Modifiers The most common material for modifying the flow properties of a resin mix is colloidal silica. This is a very fine powder which is added in conjunction with other fillers to ‘thicken’ mixes and reduce their flow on vertical surfaces (increase thixotropy).
¬ Colloidal Silica: Fine, anti-sag, filler powder. Use in combination with other filler powders.
Solvents A range of solvents for cleaning tools and surfaces. Due to the very different chemistry of some of the Gurit products from each other, it is important that the correct solvents are selected for the intended application.
Pigments A range of pigments that can be added to some Gurit products to adjust the colour / visual appearance. Please contact Gurit Technical Support for further guidance on the correct usage / addition of pigments which can vary by product.
Application, Processing and Sundry items Pumps and dispense equipment, application and processing items and pigments.
GuritAU/NZ/SEAProductCatalogue 66 GPC-APAC-29-1117
Code Selector
Filler Powders
Description Approximate Volume Size Units Order Code Availability
Hollow spheres
MICROBALLOONS 0.3KG 3 litres 0.3 kg A225-003 AU
MICROBALLOONS 5KG 50 litres 5 kg A225-005 SPECIALIST
MICROBALLOONS 12KG 120 litres 12 kg A225-007 SPECIALIST
GLASS BUBBLES 0.12KG 1 – 1.5 litres (min order 5) 0.12 kg A230-005 SPECIALIST
GLASS BUBBLES 0.12KG 2 - 3 litres 0.3 kg A230-001 NZ
GLASS BUBBLES 0.12KG 30 - 50 litres 5 kg A230-003 SPECIALIST
Short Fibres
MICROFIBRES 0.5KG 5 litres 0.5 kg A215-003 SPECIALIST
MICROFIBRES 5KG 50 litres 5 kg A215-005 SPECIALIST
MICROFIBRES 10KG 100 litres 10 kg A215-008 SPECIALIST
Flow Modifies
COLLOIDAL SILICA 0.25KG 5 litres 0.25 kg A220-003 AU/NZ
COLLOIDAL SILICA 2.5KG 50 litres 2.5 kg A220-005 SPECIALIST
COLLOIDAL SILICA 10KG 200 litres 10 kg A220-006 SPECIALIST
Cleaning Solvents
Description Application Size Units Order Code Availability
SP FAST EPOXY SOLVENT 5L Surface degreaser 5 litres A105-003 SPECIALIST
SP STD EPOXY SOLVENT 5L By-product remover 5 litres A108-003 SPECIALIST
Please note, Gurit’s solvent-free epoxies such as SP 106, Ampreg 22 should never have solvent added to them to ‘thin them down’. If a lower viscosity, thinner epoxy product is required then this should be achieved by gentle warming of the product, or warming the surface to which the product is applied. Note that any extra heat applied will also accelerate the product’s rate of cure. Alternatively, there may be a different Gurit epoxy product with a more suitable viscosity for the intended application. For the correct solvent for a given application, please see the resin systems data sheet for details.
Pigments
Description Colour Size Units Order Code Availability
SP PIGMENT WHITE 0.5KG White 0.5 kg A445-002 SPECIALIST
SP PIGMENT BLACK 0.5KG Black 0.5 kg A445-004 SPECIALIST
AU/NZ = stocked product
AU = stocked in Australia only
NZ = stocked in New Zealand only
SPECIALIST = please contact your local customer support team for product availability
For indicative purposes only, product availability subject to change at any time. Please contact Gurit Customer Service team for further information.
GuritAU/NZ/SEAProductCatalogue 67 GPC-APAC-29-1117
Code Selector Continued Application, Processing and Sundry items
Volume Description Size Units Order Code Availability
Dispense Guns
900ml 2: 1 / Pneumatic / PC Cox Gun, PPA 1 EACH K215-039 SPECIALIST
600ml 1:1 / Pneumatic / PC Cox Gun, PPA 300A 1 EACH K215-050 SPECIALIST
400ml 2:1 / Manual / Metix Gun DM400-01 1 EACH K215-021 SPECIALIST
400ml 2:1 / Pneumatic / Metix Gun DM400-85-01 1 EACH K215-022 SPECIALIST
400ml Sintex Dual Cartridge Gun 400ml 1 EACH K215-021-3 AU/NZ Dispense Gun Mix Heads
900ml Box of 20 x 16mm, 20 Element round mix head (screw connection) 1 EACH A640-021 SPECIALIST
900ml Box of 20 x 13mm, 18 Element round mix head (bell inlet) 1 EACH A640-009 SPECIALIST
600ml Box of 20 x 10.7mm, 19 Element square mix head (screw connection) 1 EACH A640-019 SPECIALIST
400ml Box of 20 x 10.7mm 20 Element 1 EACH A640-022 AU/NZ
Description Comments Size Units Order Code Availability
Miscellaneous Dispense Equipment
10cc Syringe* 1cc graduations 1 EACH A660-001 SPECIALIST
50cc Syringe* 10cc graduations 1 EACH A660-002 SPECIALIST
25 litre Drum Tap Small plastic 1 EACH K342-005 SPECIALIST
200 litre Drum Tap Large plastic 1 EACH K342-010 SPECIALIST
Plastic Mini-pump Pair Mini-pump pair for any 1kg pack 1 EACH K216-318 SPECIALIST
Pump Sets Please contact Gurit Customer Support for pump set availability
Application and Processing Items
Reusable Mixing Pots 0.5L (0.8L max) Minimum order of 100 1 EACH A640-013 SPECIALIST
Clear lid for Mixing Pots For use with A640-013 1 EACH A640-014 SPECIALIST
5” Spiked roller – inc. frame/handle For de-aeration of prepreg 1 EACH A610-001 SPECIALIST
Mixing Sticks Box of 100 sticks 1 EACH A640-004 SPECIALIST
* Syringes should be washed with warm water and a mild detergent, then flushed with clean water and allowed to air dry before use.
AU/NZ = stocked product
AU = stocked in Australia only
NZ = stocked in New Zealand only
SPECIALIST = please contact your local customer support team for product availability
For indicative purposes only, product availability subject to change at any time. Please contact Gurit Customer Service team for further information.
GuritAU/NZ/SEAProductCatalogue 68 GPC-APAC-29-1117
Vacuum Consumables
The range of vacuum consumables has been designed for use in a wide range of vacuum bag processes. Such processes include autoclave/ prepreg curing, wet lay-up, low temperature oven/ prepreg processes and infusion processes. Gurit has selected a specific range of products which are particularly suitable for working with Gurit's epoxy prepreg and laminating systems where they are regularly used for the curing of large composite structures at temperatures up to 150°C.
Sealant Tapes Sealant tape is used to seal the tool to the vacuum bag in order to provide an airtight seal. The tapes are tacky to ensure a positive seal is achieved against a variety of tool surfaces.
Peel Plies Peel plies are fine weave fabrics which are applied to the laminate stack to provide a clean, contaminant-free textured surface, suitable for secondary bonding, filling or painting. Our range is green in colour.
Release Films Release films are used to separate and release the laminate from the vacuum stack following the cure of the component. These films are perforated to allow a certain bleed of resin from the laminate into a breather material such as Econoweave 44W.
Breather Fabrics / Meshes Breather fabrics are used to absorb excess resin (bleed) from a laminate which is being cured under vacuum. The fabric also allows the air, or any volatiles, to be evacuated prior to, and during the cure cycle.
Vacuum Bagging Films Vacuum bagging films are used to effectively seal the whole of the area of the composite laminate to be cured.
Self Adhesive Mould Release Materials Self-adhesive mould release materials are used to cover moulds as an effective alternative to the use of release wax or liquids.
Flash / Release / Shrink Tapes Flash tapes are used to locate vacuum consumable materials or to mask off areas to be painted, sanded or to prevent damage. Some of these tapes have release qualities so they can be used as tool repair tapes if necessary. Shrinktapes are used to consolidate specific components.
For further information on product availability contact your local Gurit office.
GuritAU/NZ/SEAProductCatalogue 69 GPC-APAC-29-1117
Peel Plies
Description Order Code Availability
PP85-1270 Peelply Red Stripe 85 gsm x 1270mm 8052A AU
PP85-1000A Peelply Red Stripe 85 gsm x 1000mm V620-004-AP AU
PP80-150 Peelply Tracer Red Stripe 80 x 150mm 8056 NZ
PP80-200 Peelply Tracer Red Stripe 80 x 200mm 8057 NZ
PP80-250 Peelply Tracer Red Stripe 80 x 250mm 8058 NZ
PP80-760 Peelply Tracer Red Stripe 80 x 760mm 8051 NZ
PP80-1270 Peelply Tracer Red Stripe 80 x 1270mm 8052 NZ
Release Film
Description Order Code Availability
RFHT25B(P3)-1525 Perforated Release Film Blue 25mu P3 x 1525mm 8420 NZ
RFHT25B(P31)1525 Perforated Release Film Blue 25mu P31 x 1525mm 8426 NZ
RFHT25B(P6)-1525 Perforated Release Film Blue 25mu P6 x 1525mm 8425 NZ
RFHT3700(P16)-1525 RFHT3700-P16-001-60"-2000'-SHT 8452 NZ
RFHT50G(P)-1525 Perforated Release Film Green 50mu P x 1525mm 8450 NZ
RFHT50G(P6)-1525 Perforated Release Film Green (Dahlar) 50mu P6 perf x 1525m 8451 NZ
RF50-2000 Release Film Non Perforated 50mu x 2000mm 8410 NZ
RFNP50-2000 Release Film Perforated 50mu x 2000mm 8411 NZ WL3600 MP22 WL3600 MP22 Perforated x 1200mm V600-002-AP AU WL3600 P3 WL3600 P3 Perforated x 1200mm V600-003-AP AU WL3600-P98-1200 Release Film P98 Perforated x 1200mm Low Temperature V600-024-AP AU
Vacuum Bagging Films
Description Order Code Availability
VFHT50G-4060 Vacuum Bag Film Green 50 Micron x 4060mm 8259 NZ
VFHT75G-2030 Vacuum Bag Film Green 75Micron x 2030mm 8278 NZ
VFHT75G-4060 Vacuum Bag Film Green 75Micron x 4060mm 8281 NZ
VFSL37G-1525 Stretchlon 200 .0015 x 60" x 1525mm 8205 NZ
VF125-4000 Vacuum Film 125mu x 4000mm 8210 NZ
VFHT50G-2794 Vac Bag Film Green 50 Micron x 2794 VE80-001-AP AU
AU/NZ = stocked product
AU = stocked in Australia only
NZ = stocked in New Zealand only
SPECIALIST = please contact your local customer support team for product availability
For indicative purposes only, product availability subject to change at any time. Please contact Gurit Customer Service team for further information.
GuritAU/NZ/SEAProductCatalogue 70 GPC-APAC-29-1117
Mould Release Materials
Description Order Code Availability
PTFE-RF1000 V750-001 AU/NZ
Breather Fabrics/Meshes
Description Order Code Availability
BF135-1525 Breather 135g/m² x 1525mm wide (139.5m²/roll) 8315 NZ
BM5-910 Mesh Breather / Bleeder x 910mm (45.5m² roll) 8340 NZ
BFW150-1520 Breather 150 g/m² x 1520mm wide V660-001-AP AU
TMS-G-1042 Hi Performance Resin Transfer Medium - 1042mm 8956 NZ
UW606-1525 Ultraweave 606 204 g/m² (6 oz/yd²) x 1525mm wide x 45.72m (69.72m²/roll) 8316 NZ
Sealant Tapes
Description Order Code Availability
ST3Y-12 Sealant Tape 3.2mm x 12.7mm Yellow, 7.62LM/roll 8535 AU/NZ
ST3B-12 AT90B SEALANT TAPE 30x15M ROLL V700-001-AP AU/NZ
Other
Description Order Code Availability
VV-401C Vac Valve 401C In bag connections 8922 NZ ATAC2 Airtac 2 Spray Contact Adhesive 8520 NZ
GrapPowder.75 Graphite powder 0.75kg A235-001 AU
FB1-25 Flashbreaker 1/25mm V720-001 AU/NZ
FB1-50 Flashbreaker 50mm High Temp Pressure 8515 NZ
HST575-32 Heat Shrink Tape 32mm 8543 NZ
HST575-64 Heat Shrink Tape 64mm 8545 NZ
LFT75-178 Lay Flat Tubing .003 gauge x 178mm (228lm/roll) 8224 NZ
LFT75-304 Lay Flat Tubing .003 gauge x 304.8mm (305 lm/roll) 8227 NZ
LFT75-457 Lay Flat Tubing .003 gauge x 457mm (305lm/roll) 8232 NZ
LFT75-686 Lay Flat Tubing .003 gauge x 686mm (228lm/roll) 8233 NZ
PTFE 2-50 High Temp PTFE Pressure Sensitive Tape .002 x 2" 8505 NZ
QD500TF Quick Disconnects with Viton O-Rings 1/4" (threaded) 8927 NZ
GuritAU/NZ/SEAProductCatalogue 71 GPC-APAC-29-1117
Gurit Structural Engineering
Gurit’s engineering team has specialised in composite structures for over 35 years, with a heritage that was founded in some of the most demanding marine applications on the planet. Early on our design and analysis tools were honed on high level race boats, composite superyachts, high speed motor yachts and military vessels. Gurit now has considerable experience with innovative engineering of many different structures, across an ever expanding range of applications, with our focus being on the design of efficient and safe composite structures regardless of the application
¬ Industrial and product design ¬ Marine ¬ Transportation ¬ Civil and architectural structures ¬ Renewable energy
Gurit offers substantial experience and capacity in composites engineering with design offices, in New Zealand, UK, France and Italy comprising 40 engineers and designers. The team incorporates finite element specialists experienced in the analysis of advanced composite structures and engineers experienced in production detailing and through build support. From concept through to detailed analysis and production support, and right through to in-service monitoring of structures, the Gurit engineering team offers a full spectrum of engineering design capabilities
Engineering tasks include: ¬ Conceptual design ¬ Laminate design & optimisation ¬ Analysis using in-house tools ¬ CAD ¬ On-site engineering support ¬ On site data acquisition and monitoring ¬ Certification authority liaison ¬ Mechanical testing of materials in our accredited testing lab ¬ Weight and cost estimates and optimisation ¬ Design review, peer review, inspection and repair specifications ¬ FEA static, non-linear and dynamic analysis including crash simulation
Software utilised in-house includes: ¬ Proprietary specialist software ¬ AutoCAD ¬ SolidWorks ¬ Rhino ¬ Patran/Nastran with laminate modeller
GuritAU/NZ/SEAProductCatalogue 72 GPC-APAC-29-1117
Gurit Mechanical Testing
Key to the design of composite materials is understanding how the material behaves and performs. Gurit engineering runs and internationally accredited mechanical testing laboratory specialised in FRP composites for our customers. Mechanical testing can be done for a number of purposes:
¬ design certification and third party approval of as-built properties ¬ post build surveyors, forensics or to establish repair specifications ¬ establish baseline materials properties for design ¬ research and development to test new idea, validate concepts and build methods
Key to the success of this laboratory is that it is run by experienced composite design engineers who are available to help you to design and appropriate materials test program for your needs. This includes design of test specimens for standard programs, design and implementation of customised and specific tests, interpretation and reporting on the results to enable them to be implemented into your project or process.
In addition to the mechanical testing at the Auckland site the test lab is also linked with Gurit's extensive test lab in the UK for a variety of testing for Tg, fibre weight fraction (by burnoff and microscopy) environmental exposures, as well as links to universities and commercial laboratories for specialised testing.
Mechanical testing laboratory set up with:
¬ Instron UTM 3369 with an 1148 50kN load cell. A-grade annual calibration report available upon request
¬ LVDT ¬ Extensometer ¬ Strain gauge controller
Gurit provides accredited testing to the following standards:
¬ ASTM D3039M-08 – Tensile testing of polymer matrix composite materials ¬ ASTM D790 – 07e1 – Single Skin Flexure (three point bend) ¬ ASTM D6272-01 – Single Skin Flexure (four-point bend) ¬ ASTM D3165-07 and ASTM D3528 -96 (2008) – Single and Double lap shear of
adhesive joints ¬ ASTM D2344 00 (2006) – Apparent interlaminar shear strength by short beam flexure ¬ ASTM D5961 – 08 – Bearing response of polymer matrix composites
GuritAU/NZ/SEAProductCatalogue 73 GPC-APAC-29-1117
a) Tensile tests in accordance with the following standards up to 50 kN force ASTM C 297/C 297M-04 Flatwise tensile strength of sandwich constructions ASTM D 1623-09 Tensile and tensile adhesion properties of rigid cellular plastics ASTM D 3039/D 3039M-08 Tensile properties of polymer matrix composite materials ISO 527-5:2009 Plastics Determination of tensile properties – Part 5: Test conditions for unidirectional fibre-reinforced plastic composites
(b) Compression tests in accordance with the following standards up to 50 kN force ASTM C 365/C 365M-05 Flatwise compressive properties of sandwich cores ASTM D 695-08 Compressive properties of rigid plastics ASTM D 1621-04a Compressive properties of rigid cellular plastics ASTM D 6641/D 6641M-09 Compressive properties of polymer matrix composite materials using a combined loading compression (CLC) test fixture ISO 844:2007 Rigid cellular plastics – Determination of compression properties
(c) Flexure and stiffness in accordance with the following standards AS 3572.10-2002 Determination of the initial ring stiffness of glass filament reinforced plastic pipes (constant deflection test only) ASTM D 790 07e1 Flexural properties of unreinforced and reinforced plastics and electrical insulating materials ASTM D 2344/D 2344M-00(2006) Short-beam strength of polymer matrix composite materials and their laminates ASTM D 2412-02(2008) Determination of external loading characteristics of plastic pipe by parallel-plate loading ASTM 6272-02(2008) e1 Flexural properties of unreinforced and reinforced plastics and electrical insulating materials by four-point bending ASTM D 7249/D 7249M -06 Facing properties of sandwich constructions by long beam flexure ASTM D 7250/D 7250M-06 Determining sandwich beam flexural and shear stiffness
(d) Shear strength in accordance with the following standards ASTM C393/C 393M-06 Core shear properties of sandwich constructions by beam flexure ASTM 3165-07 Strength properties of adhesives in shear by tension loading of single-lap-joint laminated assembles ASTM 3528-96(2008) Strength properties of double lap shear adhesive joints by tension
(e) Density and specific gravity in accordance with the following standards ASTM C 271/C 271M- 05 Density of sandwich core materials
(f) Constituent tests in accordance with the following standards ASTM D 3171-09 Constituent content of composite materials (weight fraction test only)
(h) Other tests ASTM D 5961/D 5961M-08 Bearing response of polymer matrix composite laminates (ultimate bearing strength test only)
GuritAU/NZ/SEAProductCatalogue 74 GPC-APAC-29-1117
Other custom and speciality testing:
¬ Hoop Tensile Strength of Pipe ISO 8521
¬ Longitudinal Tensile Strength of Pipe ISO 8513 ¬ AS 4257.6 (Plastic roof and wall cladding materials – determination of impact resistance)
Our accreditations:
GuritAU/NZ/SEAProductCatalogue 75 GPC-APAC-29-1117
Contact Gurit (Asia Pacific) Ltd is available during standard business hours Monday to Friday 0830 – 1700 (NZSDST/ AEST). Outside of these hours you will be greeted by an answering service with the option to leave a message.
Please use the contact numbers provided in the table below for all enquires.
Email and Website All personnel can be contacted directly by email. If you are not sure who to contact please use the generic customer support e-mail address instead.
Information on products can be found at our website www.gurit.com. The site contains the most up to date information on all products, available to download in PDF format.
Contacting Gurit Asia Pacific (APAC) Contacts
Main Switchboard Telephone Fax
Gurit (NZ) +64 (0)9 415 6262 +64 (0)9 415 7262
Gurit (Aus) +61 (0)2 9979 7248 +61 (0)2 9979 6378
Customer Support
Gurit (NZ) +64 (0)9 415 6262 +64 (0)9 415 7262
Gurit (Aus) +61 (0)2 9979 7248 +61 (0)2 9979 6378
Sales Team
Sales (NZ) +64 (0)9 415 6262 +64 (0)9 415 7262
Sales (Aus) +61 (0)2 9979 7248 +61 (0)2 9979 6378
Marketing Communications +64 (0)9 970 2943 +64 (0)9 415 7262
Engineering +64 (0)9 970 2942
General E-mail contact info-nz@gurit.com info-au@gurit.com
GuritAU/NZ/SEAProductCatalogue 76 GPC-APAC-29-1117
Notes
GuritAU/NZ/SEAProductCatalogue 77 GPC-APAC-29-1117
Notes
Gurit SEA/NZ/AU Product Catalogue-29-1117
info-nz@gurit.com
www.gurit.com
top related