ground support equipment adp-5 - swiss air-data · 2019-01-15 · mass: 0.145 kg p∕n:...

Ground Support Equipment ADP-5.5

Tip Cover

The ADP-5.5 tip cover is specifically designed to provide a secure fit on the tip of the ADP-5.5 probe. The cover protects the probe on the ground against rain, dust and outside elements.

The tip cover is made from durable, water resistant and signal-red fabric. A "Remove before Flight" flag is attached on the front of the tip cover.

P∕N: SIM-A0D-A10

RS232-to-USB Converter Cable

With the help of this RS232-to-USB converter cable the maintenance interface of the RTMC can be easily connected with an USB connector of the personal connector if the there is no RS-232 connector available on the PC or mobile computer.

The cable has a length of 100 cm. For technical details see http://www.ftdichip.com.

P∕N: SIM-0F9-5A4

Pressure Test Adapter Ps/Pt

The Ps/Pt pressure test adapter is used to pressure test total pressure (Pt) and static pressure (Ps) of the ADP-5.5 probe on the ground with the help of an air data test set. The adapter is made from high quality aluminum and features Ø4mm pressure nipples.

Mass: 0.145 kg

P∕N: SIM-906-060

Pressure Test Adapter AoA/AoS

The AoA/AoS pressure test adapter is used to pressure test angle of attack (AoA) and angle of side-slip (AoS) of the ADP-5.5 probe on the ground with the help of an air data test set. The adapter is made from high quality aluminum and features five Ø4mm pressure nipples (±AoA, ±AoS and Pt).

Mass: 0.270 kg

P∕N: SIM-3FB-ED5

Price, Availability and Lead Time

Call factory for details.

Contact Information

Simtec Buergel AGIm Soerlibrunnen 15CH 4106 TherwilSWITZERLAND

Tel.: +41 61 7231710E-mail: info@swiss-airdata.comWeb.: http://www.swiss-airdata.com

02.05.2016Release 1