good safety practice in toll collection system and ... · working at height mobile or elevated ......

Mr. Kris LEUNGEngineering Manager

email: kris.leung@autotoll.com.hk

© Autotoll Limited 2017

18 October 2017

Good Safety Practice in Toll Collection System and

Electronic Toll Collection System Installations at Tsing Ma Control Area

Project BackgroundToll Collection System Installation at Lantau Toll Plaza

Kowloon bound: K1 - K12 (12 sets) Airport bound: A8 - A20 (13 sets)

Toll Collection System Installation at Ma Wan Toll PlazaMa Wan bound: M1 & M2 (2 sets)Kowloon bound: M3 & M4 (2 sets)

Electronic Toll Collection System Installation at Lantau Toll Plaza (for two-way toll collection)

Airport bound: A12, A18 & A19 (3 sets)

Electronic Toll Collection System Installation at Ma Wan Toll Plaza (for two-way toll collection)

Kowloon bound: M3 & M4 (2 sets)

Location Plan and Bird’s Eye View of the Site

Location Plan and Bird’s Eye View of the Site

Lantau Toll Plaza

Ma Wan Toll Plaza

Autotoll LimitedAutotoll Limited

Toll Collection SystemIntelligent Transportation System (ITS) Telematics Service PlatformEV Charging Platform

International CertificationISO 9001:2008 ISO 14001:2004OHSAS 18001:2007

Major Site Works

InstallationToll island,Toll booth,Toll plaza canopy,Carriageway &Administration Building

Safety Training

Induction training for new comersRegular Toolbox TalksSite Specific Safety Training/ Toolbox Talks conducted by TIML

Safety Promotion

Adopt Safety Bulletin Board with statisticsEncourage the use of mobile Safety App from CIC (through QR code printed on Site Worker Caring Card for easy download)Circulate work safety alerts stored in vehicle and control room

Guidance to new comersSite Specific Notes with useful guidelines, contacts and emergency procedureSite Worker Caring Card highlighting key site specific elements

Pre-work arrangement

Exercise before work Qigong practice to promote healthy lifestyleJob debriefPre work risk assessment (PWRA)Suitable PPE check

Safety Facility

Suitable Personnel Protection Equipment (PPE)Enhanced PPE: helmet with Y-type chin strap, sunshade brim and neck protectorFirst aid box with competent staff contacts

Safe Site Management (I)

Enhance site communicationSite-in-charge contact is placed in proper signs at different working areas to enhance communication with other parties at site

Identify work statusProper signs are displayed to indicate the status of work at different working areas (e.g. work in progress, testing in progress, etc.)

Safe Site Management (II)

Identify the work area (esp. Hazardous Area)

Proper labels are placed to delineate the responsible party of the corresponding site

Properly cover the work using reusable PVC trunking boards before making good the trench work

Regularly apply larvicidal oil and remove stagnant water after rainy day to combat mosquitoes, spreading Dengue and Zika

Safety Site Management (II)

Site Safety

Segregation of Traffic –Cones and tape to alert site personnel not to enter adjacent lanes with live trafficCone-off area would be extended for early traffic diversion for high speed vehicles using ETC lanesNight work with limited working window for fast lane with ETC service

Carried out by Registered Electrical Workers (REW)All electrical tools are AC110V (low voltage) or re-chargeable/ cordless type.

Electrical works

Working at height

Mobile or elevated platform operated by competent personSling for Hand Tools to prevent falling object Adoption of platform ladder

Working in hot weather

Job rotationSheltered work areaSheltered rest area, drinking water, washing facility powered by TIML

Provision of sufficient welfare facilities

SSEC meetingSSEMC meetingSafety walk

Safety monitoring measures

Promotion of “Care of Workers Opinion” award to collect frontline workers’ opinions on safety through questionnaire

Silicone sweatband was adopted Diverging sweat away from worker’s eyes which may affect work safety

Innovative and creative safety measures (I)

Site Safety Slogan Design Award

Outstanding Safety Staff Award assessed by TIML through questionnaire

Innovative and creative safety measures (II)

QR codes on equipment that link to information on how to use equipment appropriately

Innovative and creative safety measures (III)

Tailor-made safety shock absorbers with safety stickers and recycled foams

Innovative and creative safety measures (IV)

Thank You !