general catalogue of noise insulation materials · kundt’s tube measures transmission and...
Post on 13-Apr-2018
213 Views
Preview:
TRANSCRIPT
General Catalogue of
NOISE INSULATION MATERIALS
AMC MECANOCAUCHO®
Factory 1
Factory 2
MORE THAN 45 YEARS OF EXPERIENCESince 1969 AMC MECANOCAUCHO® have been designing and manufacturing products for the attenuation of structural borne noise and vibration for a wide range of Industry. In 1990, to compliment the structural borne aspect, AMC began to design and manufacture a range of AKUSTIKABSORBER® composites to attenuate Airborne noise.
1969 1995
QUALITYCOMMITMENT Only the very highest quality raw materials go into the manufacture of AMC-MECANOCAUCHO® manufactures high quality products, with state of the art machinery, to produce these effective, high quality composites.
All the prodtucts in this catalogue have been tested acoustically at the AMC laboratory; the results of these tests can be seen on each spec sheet.
Lack of fulfilment of conditions as set out in the Certification Agreement may render this certificate invalid.
ACCREDITED UNIT: DNV BUSINESS ASSURANCE ESPAÑA, S.L, C/ GARROTXA, 6-8, PL. 3 OF.1, 08820, EL PRAT DE LLOBREGAT, BARCELONA, SPAIN, TEL:+34 93 4792600
www.dnvba.es
No 06/C-MA004No 06/C-MA004
DNV BUSINESS ASSURANCEMANAGEMENT SYSTEM CERTIFICATE
Certificate number 167692-2014-AE-IBE-ENAC
This is to certify that the management system of the company
APLICACIONES MECANICAS DEL CAUCHO, S.A. AMCSA
Industrialdea, Pabellón 35, Zona A, 20159, Asteasu, Gipuzkoa, Spain
complies with the standard
ISO 14001:2004
This certificate is valid for the following scope
DESIGN, MANUFACTURING AND SALES OF ANTI-VIBRATION MOUNTS FOR ALL KIND OF MACHINERY.
Initial Certification date 18.11.2014
Place and dateBarcelona, 19.11.2014
Este certificado es válido hasta: (This certificate is valid until)
18.11.2017
Accredited UnitDNV BUSINESS ASSURANCE ESPAÑA, S.L.
The audit has been performed under the supervision of
Asier Beitia Albert Canadell Auditor Jefe Country Manager
ISO 14001: 2014ISO 9001:2014
Lack of fulfilment of conditions as set out in the Certification Agreement may render this certificate invalid.
ACCREDITED UNIT: DNV BUSINESS ASSURANCE ESPAÑA, S.L, C/ GARROTXA, 6-8, PL. 3 OF.1, 08820, EL PRAT DE LLOBREGAT, BARCELONA, SPAIN, TEL:+34 93 4792600
www.dnvba.es
DNV BUSINESS ASSURANCEMANAGEMENT SYSTEM CERTIFICATE
Certificate number 166553-2014-AQ-IBE-ENAC
This is to certify that the management system of the company
APLICACIONES MECANICAS DEL CAUCHO, S.A. AMCSA
Industrialdea,Pabellón 35, Zona A, 20159, Asteasu, Gipuzkoa, Spain
complies with the standard
ISO 9001:2008
This certificate is valid for the following scope
DESIGN, MANUFACTURING AND SALES OF ANTI-VIBRATION MOUNTS FOR ALL KIND OF MACHINERY.
Initial Certification date 09.10.2002
Place and dateBarcelona, 19.11.2014
This certificate is valid until 31.10.2017
Accredited UnitDNV BUSINESS ASSURANCE ESPAÑA, S.L.
The audit has been performed under the supervision of
Jorge de Miguel Albert Canadell Auditor Jefe Country Manager
No 03/C-SC005No 03/C-SC005
PD BEIGE .........................Pág. 10
PD WHITE ........................Pág. 12
PD BLACK ........................Pág. 14
PS BLACK ........................Pág. 16
PS WHITE .........................Pág. 18
PF BLACK .........................Pág. 20
PAI ...................................Pág. 22
PI .....................................Pág. 24
AGLO D ...........................Pág. 26
AGLO FAR ........................Pág. 28
AGLO PAI .........................Pág. 30
AGLO PI ...........................Pág. 32
FD ....................................Pág. 34
FAR ..................................Pág. 36
FAI ...................................Pág. 38
FI .....................................Pág. 40
FARM ...............................Pág. 42
FAIM ................................Pág. 44
FDM ................................Pág. 46
FIM ..................................Pág. 48
PAIM ................................Pág. 50
PDM ................................Pág. 52
PFM .................................Pág. 54
PIM ..................................Pág. 56
PSM .................................Pág. 58
PD30M ............................Pág. 60
FAI30M ............................Pág. 62
PT ....................................Pág. 64
PT FIRE-RESISTANT ..........Pág. 66
PT FIREABSORBER .........Pág. 68
HEAVY MASSES .............Pág. 70
PAVIABSORBER ...............Pág. 72
PYRAMIDAL GRAY ...........Pág. 74
PYRAMIDAL FIRE-RESISTANT .......Pág. 76
CAI ..................................Pág. 78
CAIM ...............................Pág. 80
MARINE ...........................Pág. 82
FIXING NAIL + NAUTIC COVER ....Pág. 84
INDEX
v
Akustikabsorber products are materials designed to reduce reverberation and increase the attenuation between chambers.
AMC MECANOCAUCHO® provides customers with its vast experience and know how in a wide variety of applications and installations.
Examples of different cabin executions to reduce noise emission to the exterior while maintaining proper ventilation.
AM
C E
NG
INEE
RIN
G 1. APPLICATIONS ANDINSTALLATION GUIDE
Absorbentmaterial lining Heavy-density sheet
Speakers and silencers
Absorbent material lining
Heavy-density sheet
Encapsulated with single or double openings.
Absorbent material lining
Heavy-density sheet
Perimeter area equivalent to that of the inputs an outputs of the machine cover.
Spacer
Análisis de tensiones por FEM no lineal.
Kundts Tube is very sophisticated stan-dardized test equipment, behaviour in the absorbtion and isolation against a range of frequencies.
Kundt’s tube measures transmission and absorption of a normal perpendi-cular impact wave.
“If we compare the measurements at-tained in a reverberating or transmis-sion chamber, the results will always be poorer in Kundt’s tube, since all the waves produced in the tube are direct impacts”.
Development of new products:
Knowing our client’s specific needs, we develop new akustikabsorber com-posites. Kundts Tube is very sophisti-cated standardized test equipment, behaviour in the absorbtion and iso-lation against a range of frequencies.
2. ACOUSTIC CHARACTERISTICS: KUNDT’S TUBE
Absorption coefficient1
900m
800m
700m
600m
500m
400m
300m
200m
100m
0m
0 500 1k 1,5k 2k 2,5k 3k 3,5k 4k 4,5k 5k 5,5k 6k
PD40 perforatedPD15 perforated PD25 perforated
PD BEIGE
45,00
40,00
35,00
30,00
25,00
20,00
15,00
10,00
5,00
0
TL(d
B)
0 500 1.000 1.500 2.000 2.500 3.000 3.500 4.000 4.500 5.000 5.500 6.000
PD15 with sheet PD25 with sheet PD40 with sheet
Hz
Transmission Loss (dB) PD BEIGE
PD BEIGE
[dB(A)/20.0uPa]
Medición realizadaCON AkustikabsorberAutospectrum (Signal 2) - Punto 2ZWorking: 4: Input: CPB Analyzer
80
70
60
50
40
30
20
10
0
-10
-2031,5 63 125 250 500
[Hz]1k 2k 4k 8k 16k
Medición realizadaSIN AkustikabsorberAutospectrum (Signal 1) - Punto 2ZWorking: 4: Input: CPB Analyzer
To effectively treat noise problems the rasnge of frequencies and sound levels must be identified. With that detailed information calculations can then be ca-rried out to determine the best method and type of composite.
AMC MECANOCAUCHO® applies its experience and know how in measuring and evaluating customers problems to successfully treat their applications by reducing machine produced noise and vibration emmissions.
MeaurementWITHOUT Noise insuation material
MeaurementWITH Noise insuation material
3. MEASUREMENTS
Measurement from a distance of 7 meters in diameter.
Measurement from a distance of 1 meter in diameter.
Sound measurement of an industrial machine.
1
2
3
4
5
67
8
8
GENERAL CATALOGUEAKUSTIKABSORBER
ACOUSTIC KNOWLEDGE
Reverberation time: The reverberation phenomenon is produced as a consequence of the consecutive bouncing of the sound wave on the walls of an enclosure. The reverberation time is the length of time needed for a sound pressure to decay 60dB in the enclosure or cabin.
Basic concepts of acoustics within Industry: When calculating or designing the isolation of a room or a vehicle cabin the following concepts are important.
1.-ABSORPTION: It is of interest to place absorbent materials to reduce the emission
levels of the room, by absorbing part of the interior walls’ reflections, the level within will always be less, therefore there is less to isolate.
2.-ISOLATION: Mass always plays an important role when isolating a wall, according to the mass law, when mass is doubled the acoustic isolation increases 6dB.
All isolation panels have a critical frequency that depends on the panel’s mass and rigidity. The panel’s damping coefficient will determine how much the isolation will be reduced at this point, the higher the damping the lower the reduction.
NOISE THERMOMETER
Absorption Coefficient (azul con 2 mp, Combined - C)average azul 2 mp combined with txiki average azuk 2mp
•Jet at a height of 60 m.
•Discotheque.
•Automatic hammer.
•Motorbike at full throttle.•Shouting.
•Underground train on rails.•Coffee grinder 0.60 m away.•Heated discussion.•Motorway 15 m away.•Industrial fan.•Refuse lorry.
•Noisy office.
•Vacuum cleaner.
•Air conditioner.
•Normal conversation.
•Closed windows.
•Whispering.
•Quiet living room.
•Library.
•Silent bedroom.
•Radio studio.
•Desert.
•Hearing threshold
painful
intolerable
strong
noisy
low
very low
silent
9
AKUSTIKABSORBER MATERIAL SELECTION GUIDE
2627
GEN
ERA
L C
ATA
LOG
UE
AK
UST
IKA
BSO
RBER
SPEC
IFIC
ATI
ON
S
AG
LO D
Beig
e pe
rfor
ated
PV
C f
acin
g an
d bo
und
poly
uret
hane
foa
m w
ith a
den
sity
of
150
Kg/
m3.
Lini
ng in
terio
r of
sou
ndpr
oof
cabi
ns a
nd v
ehic
les,
go
od a
bsor
ptio
n.
20 m
m.
40
mm
.
Con
sult
for
roll
man
ufac
turin
g.
2000
x 1
000
mm
. She
ets.
Com
posi
tion
App
licat
ions
Form
ats
20 m
m.
40 m
m.
Beig
e pe
rfor
ated
PV
C f
acin
g an
d bo
und
poly
uret
hane
fo
am w
ith a
den
sity
of
150
Kg/
m3 .
Ove
rall
air-
born
e no
ise
isol
atio
n us
e
Type
Co
de
SELF
- A
DH
ESIV
ER w
(d
B)
AG
LO D
150
/20
2830
0-
23
AG
LO D
A 1
50/2
028
302
x23
AG
LO D
150
/40
2830
1-
23
AG
LO D
A 1
50/4
028
303
x23
Abs
orpt
ion
coef
ficie
nt
1
900m
800m
700m
600m
500m
400m
300m
200m
100m 0m
0 50
0 1k
1,
5k
2k
2,5k
3k
3,
5k
4k
4,5k
5k
5,
5k
6k
AG
LO D
20
Hz
AG
LO D
40
TL(dB)
0 50
0 1.
000
1.50
0 2.
000
2.50
0 3.
000
3.50
0 4.
000
4.50
0 5.
000
5.50
0 6.
000
AG
LO D
20 w
ith s
heet
AG
LO D
40 w
ith s
heet
Hz
Tra
nsm
issi
on L
oss
(dB)
AG
LO D
AG
LO D
60,0
0
50,0
0
40,0
0
30,0
0
20,0
0
10,0
0 0
Thic
knes
ses
• M
easu
rem
ents
acc
ordi
ng t
o U
NE-
EN IS
O 1
40-3
st
anda
rd (D
ecem
ber
1995
) Aco
ustic
Isol
atio
n of
C
onst
ruct
ion
Mat
eria
ls in
Lab
orat
ory
Mea
sure
men
ts.
• C
orre
spon
ds c
ompl
etel
y w
ith IS
O 1
40-3
(199
5)
stan
dard
. •
Can
cels
and
sub
stitu
tes
UN
E 74
-040
/3 (1
984)
st
anda
rd.
• C
alcu
latio
ns a
ccor
ding
to
NBE
CA
88.
BY
ITS
AB
SOR
PTIO
N C
OEF
FIC
IEN
T
BY
ITS
ISO
LATI
ON
VA
LUES
BY
ITS
THIC
KN
ESSE
S
BY
ITS
CO
MPO
SITI
ON
BY
ITS
APP
LIC
ATI
ON
S
BY
ITS
RO
LL O
R S
HEE
T FO
RM
AT
BY
SEL
F-A
DH
ESIV
E O
R N
OT
10
GENERAL CATALOGUEAKUSTIKABSORBER
SPECIFICATIONS
PD BEIGE15 mm.
25 mm.
40 mm.
Composition Perforated beige coloured PVC facing and absorbing polyurethane foam.
ApplicationsLining interior of soundproof cabins and vehicles, good absorption.
Thicknesses 15 mm. 25 mm. 40 mm.
Formats1200 x1000 mm. Sheets. 15 mm. thick, 8 Sheets per box.25 mm. thick, 5 Sheets per box.40 mm. thick, 3 Sheets per box.
Perforated beige coloured PVC facing
and absorbing polyurethane foam.
Type CodeSELF-
ADHESIVERw
(dB)
PD-15 sheet 26003 - 10
PD-15 A sheet 26071 x 10
PD-15 roll 26011 - 10
PD-15 A roll 26126 x 10
PD-25 sheet 26006 - 8
PD-25 A sheet 26072 x 8
PD-25 roll 26013 - 8
PD-25 A roll 26029 x 8
PD-40 sheet 26009 - 18
PD-40 A sheet 26073 x 18
PD-40 roll 26015 - 18
PD-40 A roll 26074 x 18
Overall air-borne noise
isolation use
• Measurements according to UNE-EN ISO 140-3 standard (December 1995) Acoustic Isolation of Construction Materials in Laboratory Measurements.
• Corresponds completely with ISO 140-3(1995) standard.
• Cancels and substitutes UNE 74-040/3 (1984) standard.
• Calculations according to NBECA88.
1500 mm. wide x approx. 25 m. long Rolls.
11
Hz
Absorption coefficient 1
900m
800m
700m
600m
500m
400m
300m
200m
100m
0m
0 500 1k 1,5k 2k 2,5k 3k 3,5k 4k 4,5k 5k 5,5k 6k
PD40 perforatedPD15 perforated PD25 perforated
PD BEIGE
45,00
40,00
35,00
30,00
25,00
20,00
15,00
10,00
5,00
0
TL(d
B)
0 500 1.000 1.500 2.000 2.500 3.000 3.500 4.000 4.500 5.000 5.500 6.000
PD15 with sheet PD25 with sheet PD40 with sheet
Hz
Transmission Loss (dB) PD BEIGE
12
GENERAL CATALOGUEAKUSTIKABSORBER
SPECIFICATIONS
PD WHITE
Perforated white coloured PVC facing
and absorbing polyurethane foam.
Perforated white coloured PVC facing and absorbing polyurethane foam.Composition
Interior lining soundproof cabins or vehicles, good absorption.Applications
15 mm. 25 mm. 40 mm.
1200 x 1000 mm. Sheets. 15 mm. thick, 8 Sheets per box.25 mm. thick, 5 Sheets per box.40 mm. thick, 3 Sheets per box.
Formats
Overall air-borne noise
isolation use
15 mm.
25 mm.
40 mm.
Type CodeSELF-
ADHESIVERw
(dB)
PD-15 white sheet 26075 - 10
PD-15 A white sheet 26078 x 10
PD-15 roll white 26081 - 10
PD-15 A roll white 26084 x 10
PD-25 white sheet 26076 - 8
PD-25 A white sheet 26079 x 8
PD-25 roll white 26082 - 8
PD-25 A roll white 26085 x 8
PD-40 white sheet 26077 - 18
PD-40 A white sheet 26080 x 18
PD-40 roll white 26083 - 18
PD-40A roll white 26086 x 181500 mm. wide x approx. 20 m. long Rolls.
Thicknesses
• Measurements according to UNE-EN ISO 140-3 standard (December 1995) Acoustic Isolation of Construction Materials in Laboratory Measurements.
• Corresponds completely with ISO 140-3(1995) standard.
• Cancels and substitutes UNE 74-040/3 (1984) standard.
• Calculations according to NBECA88.
13
Absorption coefficient 1
900m
800m
700m
600m
500m
400m
300m
200m
100m
0m
0 500 1k 1,5k 2k 2,5k 3k 3,5k 4k 4,5k 5k 5,5k 6k
PD40 perforatedPD15 perforated PD25 perforated
TL(d
B)
0 500 1.000 1.500 2.000 2.500 3.000 3.500 4.000 4.500 5.000 5.500 6.000
PD15 with sheet PD25 with sheet PD40 with sheet Hz
Transmission Loss (dB)45,00
40,00
35,00
30,00
25,00
20,00
15,00
10,00
5,00
0
PD WHITE
PD WHITE
Hz
14
GENERAL CATALOGUEAKUSTIKABSORBER
SPECIFICATIONS
PD BLACK
Perforated white coloured PVC facing
and absorbing polyurethane foam.
Perforated black coloured PVC facing and absorbing polyurethane foam.Composition
Interior lining soundproof cabins or vehicles, good absorption.Applications
15 mm. 25 mm. 40 mm.
1200 x 1000 mm. Sheets. 15 mm. thick, 8 Sheets per box.25 mm. thick, 5 Sheets per box.40 mm. thick, 3 Sheets per box.
Formats
Overall air-borne noise
isolation use
15 mm.
25 mm.
40 mm.
Type CodeSELF-
ADHESIVERw
(dB)
PD-15 black sheet 26381 - 10
PD-15 A black sheet 26382 x 10
PD-15 roll black 26383 - 10
PD-15 A roll black 26384 x 10
PD-25 black sheet 26385 - 8
PD-25 A black sheet 26386 x 8
PD-25 roll black 26387 - 8
PD-25 A roll black 26388 x 8
PD-40 black sheet 26389 - 18
PD-40 A black sheet 26390 x 18
PD-40 roll black 26391 - 18
PD-40A roll black 26392 x 181500 mm. wide x approx. 20 m. long Rolls.
Thicknesses
• Measurements according to UNE-EN ISO 140-3 standard (December 1995) Acoustic Isolation of Construction Materials in Laboratory Measurements.
• Corresponds completely with ISO 140-3(1995) standard.
• Cancels and substitutes UNE 74-040/3 (1984) standard.
• Calculations according to NBECA88.
15
Absorption coefficient 1
900m
800m
700m
600m
500m
400m
300m
200m
100m
0m
0 500 1k 1,5k 2k 2,5k 3k 3,5k 4k 4,5k 5k 5,5k 6k
TL(d
B)
0 500 1.000 1.500 2.000 2.500 3.000 3.500 4.000 4.500 5.000 5.500 6.000
Hz
Transmission Loss (dB)45,00
40,00
35,00
30,00
25,00
20,00
15,00
10,00
5,00
0
PD BLACK
PD BLACK
Hz
PD15 with sheet PD25 with sheet PD40 with sheet
PD40 perforatedPD15 perforated PD25 perforated
16
GENERAL CATALOGUEAKUSTIKABSORBER
SPECIFICATIONS
PS BLACK
Black PU film and absorbing polyurethane foam.Composition
Interior lining of soundproof cabins or vehicles where the danger of hydrocarbons or water coming in contact with the absorbent material exists.
Applications
15 mm. 25 mm. 40 mm.
1200 x 1000 mm. Sheets. 15 mm. thick, 8 Sheets per box.25 mm. thick, 5 Sheets per box.40 mm. thick, 3 Sheets per box.
Formats
15 mm.
25 mm.
40 mm.
Black PU film and absorbing
polyurethane foam.
Type CodeSELF-
ADHESIVERw
(dB)
PS-15 sheet 26001 - 12
PS-15 A sheet 26087 x 12
PS-15 roll 26010 - 12
PS-15 A roll 26068 x 12
PS-25 sheet 26004 - 12
PS-25 A sheet 26088 x 12
PS-25 roll 26012 - 12
PS-25 A roll 26090 x 12
PS-40 sheet 26007 - 17
PS-40 A sheet 26089 x 17
PS-40 roll 26014 - 17
PS-40 A roll 26091 x 17
Overall air-borne noise
isolation use
1500 mm. wide x approx. 20 m. long Rolls.
Thicknesses
• Measurements according to UNE-EN ISO 140-3 standard (December 1995) Acoustic Isolation of Construction Materials in Laboratory Measurements.
• Corresponds completely with ISO 140-3(1995) standard.
• Cancels and substitutes UNE 74-040/3 (1984) standard.
• Calculations according to NBECA88.
17
Absorption coefficient
1
900m
800m
700m
600m
500m
400m
300m
200m
100m
0m
0 500 1k 1,5k 2k 2,5k 3k 3,5k 4k 4,5k 5k 5,5k 6k
PS40PS15
Hz
PS25
TL(d
B)
0 500 1.000 1.500 2.000 2.500 3.000 3.500 4.000 4.500 5.000 5.500 6.000
PS15 with sheet PS25 with sheet PS40 with sheet
Hz
Transmission Loss (dB)
35,00
30,00
25,00
20,00
15,00
10,00
5,00
0
PS BLACK
PS BLACK
18
GENERAL CATALOGUEAKUSTIKABSORBER
SPECIFICATIONS
PS WHITE
White PU film and absorbing polyurethane foam.
Interior lining of soundproof cabins or vehicles where the danger of hydrocarbons or water coming in contact with the absorbent material exists.
15 mm. 25 mm. 40 mm.
1200 x 1000 mm. Sheets. 15 mm. thick, 8 Sheets per box.25 mm. thick, 5 Sheets per box.40 mm. thick, 3 Sheets per box.
Composition
Applications
Formats
15 mm.
25 mm.
40 mm.
White PU film and absorbing polyurethane
foam.
Type CodeSELF-
ADHESIVERw
(dB)
PS-15 sheet 26002 - 12
PS-15 A sheet 26092 x 12
PS-15 roll 26058 - 12
PS-15 A roll 26095 x 12
PS-25 sheet 26005 - 12
PS-25 A sheet 26093 x 12
PS-25 roll 26059 - 12
PS-25 A roll 26096 x 12
PS-40 sheet 26008 - 17
PS-40 A sheet 26094 x 17
PS-40 roll 26060 - 17
PS-40 A roll 26097 x 17
Overall air-borne noise
isolation use
1500 mm. wide x approx. 20 m. long Rolls.
Thicknesses
• Measurements according to UNE-EN ISO 140-3 standard (December 1995) Acoustic Isolation of Construction Materials in Laboratory Measurements.
• Corresponds completely with ISO 140-3(1995) standard.
• Cancels and substitutes UNE 74-040/3 (1984) standard.
• Calculations according to NBECA88.
19
PS WHITE
PS WHITE35,00
30,00
25,00
20,00
15,00
10,00
5,00
0
Absorption coefficient
1
900m
800m
700m
600m
500m
400m
300m
200m
100m
0m
0 500 1k 1,5k 2k 2,5k 3k 3,5k 4k 4,5k 5k 5,5k 6k
PS40PS15 PS25
TL(d
B)
0 500 1.000 1.500 2.000 2.500 3.000 3.500 4.000 4.500 5.000 5.500 6.000
PS15 with sheet PS25 with sheet PS40 with sheet
Hz
Transmission Loss (dB)
Hz
20
GENERAL CATALOGUEAKUSTIKABSORBER
SPECIFICATIONS
PF BLACK
Black unwoven fabric and absorbing polyurethane foam.
Lining interior of soundproof cabins and vehicles, good absorption.
15 mm. 25 mm. 40 mm.
1200 x 1000 mm. Sheets. 15 mm. thick, 8 Sheets per box.25 mm. thick, 5 Sheets per box.40 mm. thick, 3 Sheets per box.
Composition
Applications
Formats
15 mm.
25 mm.
40 mm.
Black unwoven fabric and absorbing polyurethane foam.
Type CodeSELF-
ADHESIVERw
(dB)
PF-15 roll 26160 - 11
PF-15 A roll 26163 x 11
PF-25 roll 26161 - 12
PF-25 A roll 26164 x 12
PF-40 roll 26162 - 11
PF-40 A roll 26165 x 11
PF-15 A sheet 26291 x 11
PF-25 A sheet 26292 x 12
PF-40 A sheet 26193 x 11
PF-15 sheet 26166 - 11
PF-25 sheet 26167 - 12
PF-40 sheet 26168 - 11
Overall air-borne noise
isolation use
1500 mm. wide x approx. 20 m. long Rolls.
Thicknesses
• Measurements according to UNE-EN ISO 140-3 standard (December 1995) Acoustic Isolation of Construction Materials in Laboratory Measurements.
• Corresponds completely with ISO 140-3(1995) standard.
• Cancels and substitutes UNE 74-040/3 (1984) standard.
• Calculations according to NBECA88.
21
Absorption coefficient
1
900m
800m
700m
600m
500m
400m
300m
200m
100m
0m
0 500 1k 1,5k 2k 2,5k 3k 3,5k 4k 4,5k 5k 5,5k 6k
PF40PF15
Hz
PF25
TL(d
B)
0 500 1.000 1.500 2.000 2.500 3.000 3.500 4.000 4.500 5.000 5.500 6.000 Hz
Transmission Loss (dB)
PF BLACK
PF BLACK35,00
30,00
25,00
20,00
15,00
10,00
5,00
0
PF15 with sheet PF25 with sheet PF40 with sheet
22
GENERAL CATALOGUEAKUSTIKABSORBER
SPECIFICATIONS
PAI
Aluminium facing with fibreglass support and absorbing polyurethane foam.
Thermal insulation, M-1 class fire-resistant, good resistance to hydrocarbon damage and not very good acoustic absorber but good isolator.
15 mm. 25 mm. 40 mm.
1200 x 1000 mm. Sheets. 15 mm. thick, 8 Sheets per box.25 mm. thick, 5 Sheets per box.40 mm. thick, 3 Sheets per box.
Composition
Applications
Formats
15 mm.
25 mm.
40 mm.
Aluminium facing with
fibreglass support and absorbing
polyurethane foam.
Type CodeSELF-
ADHESIVERw
(dB)
PAI-15 sheet 26025 - 17
PAI-15 A sheet 26170 x 17
PAI-15 roll 26022 - 17
PAI-15 A roll 26172 x 17
PAI-25 sheet 26026 - 19
PAI-25 A sheet 26127 x 19
PAI-25 roll 26023 - 19
PAI-25 A roll 26173 x 19
PAI-40 sheet 26027 - 19
PAI-40 A sheet 26171 x 19
PAI-40 roll 26024 - 19
PAI-40 A roll 26174 x 19
Overall air-borne noise
isolation use
1500mm wide x approx. 20m long Rolls.
Thicknesses
• Measurements according to UNE-EN ISO 140-3 standard (December 1995) Acoustic Isolation of Construction Materials in Laboratory Measurements.
• Corresponds completely with ISO 140-3(1995) standard.
• Cancels and substitutes UNE 74-040/3 (1984) standard.
• Calculations according to NBECA88.
23
Absorption coefficient
1
900m
800m
700m
600m
500m
400m
300m
200m
100m
0m
0 500 1k 1,5k 2k 2,5k 3k 3,5k 4k 4,5k 5k 5,5k 6k
PAI40PAI15 PAI25
TL(d
B)
0 500 1.000 1.500 2.000 2.500 3.000 3.500 4.000 4.500 5.000 5.500 6.000
PAI15 with sheet PAI25 with sheet PAI40 with sheet
Transmission Loss (dB)
PAI
PAI45,00
40,00
35,00
30,00
25,00
20,00
15,00
10,00
5,00
0
Hz
Hz
24
GENERAL CATALOGUEAKUSTIKABSORBER
SPECIFICATIONS
PI
White coloured fiberglass facing and absorbing polyurethane foam.
Thermal insulation, good resistance to hydrocarbon damage and not very good acoustic absorber but good isolator.
15 mm. 25 mm. 40 mm.
1200 x 1000 mm. Sheets. 15 mm. thick, 8 Sheets per box.25 mm. thick, 5 Sheets per box.40 mm. thick, 3 Sheets per box.
Composition
Applications
Formats
15 mm.
25 mm.
40 mm.
White coloured fiberglass facing
and absorbing polyurethane foam.
Type CodeSELF-
ADHESIVERw
(dB)
PI-15 sheet 26019 - 18
PI-15 A sheet 26180 x 18
PI-15 roll 26016 - 18
PI-15 A roll 26183 x 18
PI-25 sheet 26020 - 18
PI-25 A sheet 26181 x 18
PI-25 roll 26017 - 18
PI-25 A roll 26069 x 18
PI-40 sheet 26021 - 19
PI-40 A sheet 26182 x 19
PI-40 roll 26018 - 19
PI-40 A roll 26184 x 19
Overall air-borne noise
isolation use
1500 mm. wide x approx. 20 m. long Rolls.
Thicknesses
• Measurements according to UNE-EN ISO 140-3 standard (December 1995) Acoustic Isolation of Construction Materials in Laboratory Measurements.
• Corresponds completely with ISO 140-3(1995) standard.
• Cancels and substitutes UNE 74-040/3 (1984) standard.
• Calculations according to NBECA88.
25
Absorption coefficient
1
900m
800m
700m
600m
500m
400m
300m
200m
100m
0m
0 500 1k 1,5k 2k 2,5k 3k 3,5k 4k 4,5k 5k 5,5k 6k
PI40PI15
Hz
PI25
TL(d
B)
0 500 1.000 1.500 2.000 2.500 3.000 3.500 4.000 4.500 5.000 5.500 6.000
PI15 with sheet PI25 with sheet PI40 with sheet
Hz
Transmission Loss (dB)
PI
PI50,00
45,00
40,00
35,00
30,00
25,00
20,00
15,00
10,00
5,00
0
26
GENERAL CATALOGUEAKUSTIKABSORBER
SPECIFICATIONS
AGLO D
Beige perforated PVC facing and bound polyurethane foam with a density of 150 Kg/m3.
Lining interior of soundproof cabins and vehicles, good absorption.
20 mm. 40 mm.
Consult for roll manufacturing.
2000 x 1000 mm. Sheets.
Composition
Applications
Formats
20 mm.
40 mm.
Beige perforated PVC facing and
bound polyurethane foam with a density
of 150 Kg/m3.
Overall air-borne noise
isolation use
Type CodeSELF-
ADHESIVERw
(dB)
AGLO D 150/20 28300 - 23
AGLO D A 150/20 28302 x 23
AGLO D 150/40 28301 - 23
AGLO D A 150/40 28303 x 23
Thicknesses
• Measurements according to UNE-EN ISO 140-3 standard (December 1995) Acoustic Isolation of Construction Materials in Laboratory Measurements.
• Corresponds completely with ISO 140-3(1995) standard.
• Cancels and substitutes UNE 74-040/3 (1984) standard.
• Calculations according to NBECA88.
27
Absorption coefficient
1
900m
800m
700m
600m
500m
400m
300m
200m
100m
0m
0 500 1k 1,5k 2k 2,5k 3k 3,5k 4k 4,5k 5k 5,5k 6k
AGLO D20
Hz
AGLO D40
TL(d
B)
0 500 1.000 1.500 2.000 2.500 3.000 3.500 4.000 4.500 5.000 5.500 6.000
AGLO D20 with sheet AGLO D40 with sheet
Hz
Transmission Loss (dB)
AGLO D
AGLO D
60,00
50,00
40,00
30,00
20,00
10,00
0
28
GENERAL CATALOGUEAKUSTIKABSORBER
SPECIFICATIONS
AGLO FAR
Black unwoven film and bound polyurethane foam with a density of 150 Kr/m3.
Lining interior of soundproof cabins and vehicles, good absorption.
20 mm. 40 mm.
Consult for roll manufacturing.
2000 x 1000 mm. Sheets.
Composition
Applications
Formats
20 mm.
40 mm.
Black unwoven film and bound
polyurethane foam with a density of 150
Kr/m3.
Overall air-borne noise
isolation use
Type CodeSELF-
ADHESIVERw
(dB)
AGLO FAR 150/20 28304 - 21
AGLO FAR + AUTO 150/20
28306 x 21
AGLO FAR 150/40 28305 - 18
AGLO FAR + AUTO 150/40
28307 x 18
Thicknesses
• Measurements according to UNE-EN ISO 140-3 standard (December 1995) Acoustic Isolation of Construction Materials in Laboratory Measurements.
• Corresponds completely with ISO 140-3(1995) standard.
• Cancels and substitutes UNE 74-040/3 (1984) standard.
• Calculations according to NBECA88.
29
Absorption coefficient
1
900m
800m
700m
600m
500m
400m
300m
200m
100m
0m
0 500 1k 1,5k 2k 2,5k 3k 3,5k 4k 4,5k 5k 5,5k 6k
AGLO FAR40
Hz
AGLO FAR20
TL(d
B)
0 500 1.000 1.500 2.000 2.500 3.000 3.500 4.000 4.500 5.000 5.500 6.000
AGLO FAR20 with sheet AGLO FAR20 with sheet
Hz
Transmission Loss (dB)
AGLO FAR
AGLO FAR60,00
50,00
40,00
30,00
20,00
10,00
0
30
GENERAL CATALOGUEAKUSTIKABSORBER
SPECIFICATIONS
AGLO PAI
Aluminium facing with fiberglass support and bound polyurethane foam with a density of 150 Kg/m3.
Thermal insulation, M-1 class fire-resistant, good resistance to hydrocarbon damage and not very good acoustic absorber but good isolator.
Composition
Applications
20 mm. 40 mm.
Consult for roll manufacturing.
2000 x 1000 mm. Sheets.Formats
20 mm.
40 mm.
Aluminium facing with fiberglass
support and bound polyurethane foam
with a density of 150 Kg/m3.
Overall air-borne noise
isolation use
Type CodeSELF-
ADHESIVERw
(dB)
AGLO PAI 150/20 28101 - 26
AGLO PAI + AUTO 150/20
28308 x 26
AGLO PAI 150/40 28102 - 24
AGLO PAI + AUTO 150/40
28309 x 24
Thicknesses
• Measurements according to UNE-EN ISO 140-3 standard (December 1995) Acoustic Isolation of Construction Materials in Laboratory Measurements.
• Corresponds completely with ISO 140-3(1995) standard.
• Cancels and substitutes UNE 74-040/3 (1984) standard.
• Calculations according to NBECA88.
31
Absorption coefficient
1
900m
800m
700m
600m
500m
400m
300m
200m
100m
0m
0 500 1k 1,5k 2k 2,5k 3k 3,5k 4k 4,5k 5k 5,5k 6k
AGLO PAI20
Hz
AGLO PAI40
TL(d
B)
0 500 1.000 1.500 2.000 2.500 3.000 3.500 4.000 4.500 5.000 5.500 6.000
AGLO PAI20 with sheet AGLO PAI40 with sheet
Hz
Transmission Loss (dB)
AGLO PAI
AGLO PAI
50,00
45,00
40,00
35,00
30,00
25,00
20,00
15,00
10,00
5,00
0
32
GENERAL CATALOGUEAKUSTIKABSORBER
SPECIFICATIONS
AGLO PI
Fiberglass facing and bound polyurethane foam with a density of 150 Kg/m3.
Thermal insulation, good resistance to hydrocarbon damage and not very good acoustic absorber but good isolator.
20 mm. 40 mm.
Consult for roll manufacturing.
2000x1000mm Sheets.
Composition
Applications
Formats
20 mm.
40 mm.
Fiberglass facing and bound polyurethane foam with a density
of 150 Kg/m3.
Overall air-borne noise
isolation use
Type CodeSELF-
ADHESIVERw
(dB)
AGLO PI 150/20 28310 - 25
AGLO PI + AUTO 150/20 28312 x 25
AGLO PI 150/40 28311 - 26
AGLO PI + AUTO 150/40 28313 x 26
Thicknesses
• Measurements according to UNE-EN ISO 140-3 standard (December 1995) Acoustic Isolation of Construction Materials in Laboratory Measurements.
• Corresponds completely with ISO 140-3(1995) standard.
• Cancels and substitutes UNE 74-040/3 (1984) standard.
• Calculations according to NBECA88.
33
60,00
50,00
40,00
30,00
20,00
10,00
0
AGLO PI
AGLO PI
Absorption coefficient
1
900m
800m
700m
600m
500m
400m
300m
200m
100m
0m
0 500 1k 1,5k 2k 2,5k 3k 3,5k 4k 4,5k 5k 5,5k 6k
AGLO PI20
Hz
AGLO PI40
TL(d
B)
0 500 1.000 1.500 2.000 2.500 3.000 3.500 4.000 4.500 5.000 5.500 6.000
AGLO PI20 with sheet AGLO PI40 with sheet
Hz
Transmission Loss (dB)
34
GENERAL CATALOGUEAKUSTIKABSORBER
SPECIFICATIONS
FD
Beige perforated PVC facing and M-1 class fire-resistant absorbing polyurethane foam.
Lining interior of soundproof cabins or vehicles, good absorption and absorbent with M-1 class fire-resistant behaviour.
15 mm. 25 mm.
Consult for roll manufacturing possibilities.
1200 x 1000 mm. Sheets.15 mm. thick, 8 Sheets per box.25 mm. thick, 5 Sheets per box.
Composition
Applications
Formats
15 mm.
25 mm.
Beige perforated PVC facing and
M-1 class fire-resistant absorbing
polyurethane foam.
Overall air-borne noise
isolation use
Type CodeSELF-
ADHESIVERw
(dB)
FD-15 sheet 26231 - 13
FD-15 A sheet 26233 x 13
FD-25 sheet 26232 - 11
FD-25 A sheet 26234 x 11
Thicknesses
• Measurements according to UNE-EN ISO 140-3 standard (December 1995) Acoustic Isolation of Construction Materials in Laboratory Measurements.
• Corresponds completely with ISO 140-3(1995) standard.
• Cancels and substitutes UNE 74-040/3 (1984) standard.
• Calculations according to NBECA88.
35
35,00
30,00
25,00
20,00
15,00
10,00
5,00
0
FD
FD
Absorption coefficient
1
900m
800m
700m
600m
500m
400m
300m
200m
100m
0m
0 500 1k 1,5k 2k 2,5k 3k 3,5k 4k 4,5k 5k 5,5k 6k
FD15
Hz
FD25
TL(d
B)
0 500 1.000 1.500 2.000 2.500 3.000 3.500 4.000 4.500 5.000 5.500 6.000
FD15 with sheet FD25 with sheet
Hz
Transmission Loss (dB)
36
GENERAL CATALOGUEAKUSTIKABSORBER
SPECIFICATIONS
FAR
Black unwoven film and M-1 class fire-resistant absorbing polyurethane foam.
Lining interior of soundproof cabins or vehicles, good absorption and absorbent with M-1 class fire-resistant behaviour.
15 mm. 25 mm.
Consult for roll manufacturing possibilities.
1200 x 1000 mm. Sheets.15 mm. thick, 8 Sheets per box.25 mm. thick, 5 Sheets per box.
Composition
Applications
Formats
15 mm.
25 mm.
Black unwoven film and M-1 class fire-resistant absorbing
polyurethane foam.
Overall air-borne noise
isolation use
Type CodeSELF-
ADHESIVERw
(dB)
FAR-15 sheet 26241 - 10
FAR-15 A sheet 26242 x 10
FAR-25 sheet 26243 - 10
FAR-25 A sheet 26244 x 10
Thicknesses
• Measurements according to UNE-EN ISO 140-3 standard (December 1995) Acoustic Isolation of Construction Materials in Laboratory Measurements.
• Corresponds completely with ISO 140-3(1995) standard.
• Cancels and substitutes UNE 74-040/3 (1984) standard.
• Calculations according to NBECA88.
37
30,00
25,00
20,00
15,00
10,00
5,00
0
FAR
FAR
Absorption coefficient
1
900m
800m
700m
600m
500m
400m
300m
200m
100m
0m
0 500 1k 1,5k 2k 2,5k 3k 3,5k 4k 4,5k 5k 5,5k 6k
FAR15
Hz
FAR25
TL(d
B)
0 500 1.000 1.500 2.000 2.500 3.000 3.500 4.000 4.500 5.000 5.500 6.000
FAR15 with sheet FAR25 with sheet
Hz
Transmission Loss (dB)
38
GENERAL CATALOGUEAKUSTIKABSORBER
SPECIFICATIONS
FAI
Aluminium facing with fibreglass support and M-1 class fire-resistant absorbing polyurethane foam.
Thermal insulation, M-1 class fire-resistant, good resistance to hydrocarbon damage and not very good acoustic absorber but good isolator.
15 mm. 25 mm.
Consult for roll manufacturing possibilities.
1200 x 1000 mm. Sheets.15 mm. thick, 8 Sheets per box.25 mm. thick, 5 Sheets per box.
Composition
Applications
Formats
15 mm.
25 mm.
Aluminium facing with fibreglass
support and M-1 class fire-
resistant absorbing polyurethane foam.
Overall air-borne noise
isolation use
Type CodeSELF-
ADHESIVERw
(dB)
FAI-15 sheet 26251 - 19
FAI-15 A sheet 26253 x 19
FAI-25 sheet 26252 - 23
FAI-25 A sheet 26254 x 23
Thicknesses
• Measurements according to UNE-EN ISO 140-3 standard (December 1995) Acoustic Isolation of Construction Materials in Laboratory Measurements.
• Corresponds completely with ISO 140-3(1995) standard.
• Cancels and substitutes UNE 74-040/3 (1984) standard.
• Calculations according to NBECA88.
39
45,00
40,00
35,00
30,00
25,00
20,00
15,00
10,00
5,00
0
FAI
FAI
Absorption coefficient
1
900m
800m
700m
600m
500m
400m
300m
200m
100m
0m
0 500 1k 1,5k 2k 2,5k 3k 3,5k 4k 4,5k 5k 5,5k 6k
FAI15
Hz
FAI25
TL(d
B)
0 500 1.000 1.500 2.000 2.500 3.000 3.500 4.000 4.500 5.000 5.500 6.000
FAI15 with sheet FAI25 with sheet
Hz
Transmission Loss (dB)
40
GENERAL CATALOGUEAKUSTIKABSORBER
SPECIFICATIONS
FI
Fiberglass facing and M-1 class fire-resistant absorbing polyurethane foam.
Thermal insulation, M-1 class fire-resistant behaviour, good resistance to hydrocarbon damage and not very good acoustic absorber but good isolator.
15 mm. 25 mm.
Consult for roll manufacturing possibilities.
1200 x 1000 mm. Sheets.15 mm. thick, 8 Sheets per box.25 mm. thick, 5 Sheets per box.
Composition
Applications
Formats
15 mm.
25 mm.
Fiberglass facing and M-1 class fire-resistant absorbing
polyurethane foam.
Overall air-borne noise
isolation use
Type CodeSELF-
ADHESIVERw
(dB)
FI-15 sheet 26206 - 22
FI-15 A sheet 26201 x 22
FI-25 sheet 26207 - 23
FI-25 A sheet 26205 x 23
Thicknesses
• Measurements according to UNE-EN ISO 140-3 standard (December 1995) Acoustic Isolation of Construction Materials in Laboratory Measurements.
• Corresponds completely with ISO 140-3(1995) standard.
• Cancels and substitutes UNE 74-040/3 (1984) standard.
• Calculations according to NBECA88.
41
50,00
45,00
40,00
35,00
30,00
25,00
20,00
15,00
10,00
5,00
0
FI
FI
Absorption coefficient
1
900m
800m
700m
600m
500m
400m
300m
200m
100m
0m
0 500 1k 1,5k 2k 2,5k 3k 3,5k 4k 4,5k 5k 5,5k 6k
FI15 FI25
TL(d
B)
0 500 1.000 1.500 2.000 2.500 3.000 3.500 4.000 4.500 5.000 5.500 6.000
FI15 with sheet FI25 with sheet
Transmission Loss (dB)
Hz
Hz
42
GENERAL CATALOGUEAKUSTIKABSORBER
SPECIFICATIONS
FARM
Black unwoven film, M-1 class fire-resistant absorbing polyurethane foam and 5 Kg/m2 heavy viscoelastic mass.
Lining interior of soundproof cabins and vehicles, good absorption, absorbent with M-1 class fire-resistant behaviour and damping sheet that increases the mass and dampens vibrations.
15 mm. 25 mm.
1200 x 1000 mm. Sheets.15 mm. thick, 8 Sheets per box.25 mm. thick, 5 Sheets per box.
Composition
Applications
Formats
15 mm.
25 mm.
Black unwoven film, M-1 class fire-resistant absorbing polyurethane foam and 5 Kg/m2 heavy
viscoelastic mass.
Overall air-borne noise
isolation use
Type CodeSELF-
ADHESIVERw
(dB)
FARM-15 sheet 26261 - 12
FARM-15 A sheet 26263 x 12
FARM-25 sheet 26262 - 13
FARM-25 A sheet 26264 x 13
Thicknesses
• Measurements according to UNE-EN ISO 140-3 standard (December 1995) Acoustic Isolation of Construction Materials in Laboratory Measurements.
• Corresponds completely with ISO 140-3(1995) standard.
• Cancels and substitutes UNE 74-040/3 (1984) standard.
• Calculations according to NBECA88.
43
40,00
35,00
30,00
25,00
20,00
15,00
10,00
5,00
0
FARM
FARM
Absorption coefficient
1
900m
800m
700m
600m
500m
400m
300m
200m
100m
0m
0 500 1k 1,5k 2k 2,5k 3k 3,5k 4k 4,5k 5k 5,5k 6k
FARM15
Hz
FARM25
TL(d
B)
0 500 1.000 1.500 2.000 2.500 3.000 3.500 4.000 4.500 5.000 5.500 6.000
FARM15 with sheet FARM25 with sheet
Hz
Transmission Loss (dB)
44
GENERAL CATALOGUEAKUSTIKABSORBER
SPECIFICATIONS
FAIM
Aluminium facing with fibreglass support, M-1 class fire-resistant absorbing polyurethane foam and 5 Kg/m2 heavy viscoelastic mass.
Thermal insulation, M-1 class fire-resistant, good resistance to hydrocarbon damage and not very good acoustic absorber but good absorbing isolator with M-1 class fire-resistant behaviour and damping sheet that increases the mass and dampens vibrations.
15 mm. 25 mm.
1200 x 1000 mm. Sheets.15 mm. thick, 8 Sheets per box.25 mm. thick, 5 Sheets per box.
Composition
Applications
Formats
15 mm.
25 mm.
Aluminium facing with fibreglass support, M-1
class fire-resistant absorbing
polyurethane foam and 5 Kg/m2 heavy
viscoelastic mass.
Overall air-borne noise
isolation use
Type CodeSELF-
ADHESIVERw
(dB)
FAIM-15 sheet 26271 - 22
FAIM-15 A sheet 26273 x 22
FAIM-25 sheet 26272 - 25
FAIM-25 A sheet 26274 x 25
Thicknesses
• Measurements according to UNE-EN ISO 140-3 standard (December 1995) Acoustic Isolation of Construction Materials in Laboratory Measurements.
• Corresponds completely with ISO 140-3(1995) standard.
• Cancels and substitutes UNE 74-040/3 (1984) standard.
• Calculations according to NBECA88.
45
45,00
40,00
35,00
30,00
25,00
20,00
15,00
10,00
5,00
0
FAIM
FAIM
Absorption coefficient
1
900m
800m
700m
600m
500m
400m
300m
200m
100m
0m
0 500 1k 1,5k 2k 2,5k 3k 3,5k 4k 4,5k 5k 5,5k 6k
FAIM15
Hz
FAIM25
TL(d
B)
0 500 1.000 1.500 2.000 2.500 3.000 3.500 4.000 4.500 5.000 5.500 6.000
FAIM15 with sheet FAIM25 with sheet
Hz
Transmission Loss (dB)
46
GENERAL CATALOGUEAKUSTIKABSORBER
SPECIFICATIONS
FDM
Beige colour perforated PVC facing, M-1 class fire-resistant absorbing polyurethane foam and 5 Kg/m2 heavy viscoelastic mass.
Lining interior of soundproof cabins and vehicles, good absorption, absorbent with M-1 class fire-resistant behaviour and damping sheet that increases the mass and dampens vibrations.
15 mm. 25 mm.
1200 x 1000 mm. Sheets.15 mm. thick, 8 Sheets per box.25 mm. thick, 5 Sheets per box.
Composition
Applications
Formats
15 mm.
25 mm.
Beige colour perforated PVC
facing, M-1 class fire-resistant absorbing polyurethane foam and 5 Kg/m2 heavy
viscoelastic mass.
Overall air-borne noise
isolation use
Type CodeSELF-
ADHESIVERw
(dB)
FDM-15 sheet 26281 - 15
FDM-15 A sheet 26283 x 15
FDM-25 sheet 26282 - 13
FDM-25 A sheet 26284 x 13
Thicknesses
• Measurements according to UNE-EN ISO 140-3 standard (December 1995) Acoustic Isolation of Construction Materials in Laboratory Measurements.
• Corresponds completely with ISO 140-3(1995) standard.
• Cancels and substitutes UNE 74-040/3 (1984) standard.
• Calculations according to NBECA88.
47
40,00
35,00
30,00
25,00
20,00
15,00
10,00
5,00
0
FDM
FDM
Absorption coefficient
1
900m
800m
700m
600m
500m
400m
300m
200m
100m
0m
0 500 1k 1,5k 2k 2,5k 3k 3,5k 4k 4,5k 5k 5,5k 6k
FDM15
Hz
FDM25
TL(d
B)
0 500 1.000 1.500 2.000 2.500 3.000 3.500 4.000 4.500 5.000 5.500 6.000
FDM15 with sheet FDM25 with sheet
Hz
Transmission Loss (dB)
48
GENERAL CATALOGUEAKUSTIKABSORBER
SPECIFICATIONS
FIM
Fiberglass facing, M-1 class fire-resistant absorbing polyurethane foam and 5 Kg/m2 heavy viscoelastic mass.
Thermal insulation, M-1 class fire-resistant behaviour, good resistance to hydrocarbon damage and not very good acoustic absorber but good absorbing isolator with M-1 class fire-resistant behaviour and damping sheet that increases the mass and dampens vibrations.
15 mm. 25 mm.
1200 x 1000 mm. Sheets.15 mm. thick, 8 Sheets per box.25 mm. thick, 5 Sheets per box.
Composition
Applications
Formats
15 mm.
25 mm.
Fiberglass facing, M-1 class fire-
resistant absorbing polyurethane foam and 5 Kg/m2 heavy
viscoelastic mass.
Overall air-borne noise
isolation use
Type CodeSELF-
ADHESIVERw
(dB)
FIM-15 sheet 26221 - 24
FIM-15 A sheet 26211 x 24
FIM-25 sheet 26225 - 24
FIM-25 A sheet 26215 x 24
Thicknesses
• Measurements according to UNE-EN ISO 140-3 standard (December 1995) Acoustic Isolation of Construction Materials in Laboratory Measurements.
• Corresponds completely with ISO 140-3(1995) standard.
• Cancels and substitutes UNE 74-040/3 (1984) standard.
• Calculations according to NBECA88.
49
60,00
50,00
40,00
30,00
20,00
10,00
0
FIM
FIM
Absorption coefficient
1
900m
800m
700m
600m
500m
400m
300m
200m
100m
0m
0 500 1k 1,5k 2k 2,5k 3k 3,5k 4k 4,5k 5k 5,5k 6k
FIM15
Hz
FIM25
TL(d
B)
0 500 1.000 1.500 2.000 2.500 3.000 3.500 4.000 4.500 5.000 5.500 6.000
FIM15 with sheet FIM25 with sheet
Hz
Transmission Loss (dB)
50
GENERAL CATALOGUEAKUSTIKABSORBER
SPECIFICATIONS
PAIM
Thermal insulation, M-1 class fire-resistant, good resistance to hydrocarbon damage and not very good acoustic absorber but good isolator and damping sheet that increases the mass and dampens vibrations.
Aislante térmico, comportamiento M-1 ignífugo, buena resistencia la empape de hidrocarburos y no muy buen absorbente acústico pero sí buen aislante y lámina amortiguante que aumenta la masa y amortigua las vibraciones.
15 mm. 25 mm. 40 mm.
1200 x 1000 mm. Sheets.15 mm. thick, 8 Sheets per box.25 mm. thick, 5 Sheets per box.40 mm. thick, 3 Sheets per box.
Composition
Applications
Formats
15 mm.
25 mm.
40 mm.
Aluminium facing with fiberglass
support, absorbing polyurethane foam and 5 Kg/m2 heavy
viscoelastic mass.
Overall air-borne noise
isolation use
Type CodeSELF-
ADHESIVERw
(dB)
PAIM-15 sheet 26122 - 20
PAIM-15 A sheet 26116 x 20
PAIM-25 sheet 26123 - 21
PAIM-25 A sheet 26117 x 21
PAIM-40 sheet 26124 - 22
PAIM-40 A sheet 26118 x 22
Thicknesses
• Measurements according to UNE-EN ISO 140-3 standard (December 1995) Acoustic Isolation of Construction Materials in Laboratory Measurements.
• Corresponds completely with ISO 140-3(1995) standard.
• Cancels and substitutes UNE 74-040/3 (1984) standard.
• Calculations according to NBECA88.
51
50,00
45,00
40,00
35,00
30,00
25,00
20,00
15,00
10,00
5,00
0
Absorption coefficient
1
900m
800m
700m
600m
500m
400m
300m
200m
100m
0m
0 500 1k 1,5k 2k 2,5k 3k 3,5k 4k 4,5k 5k 5,5k 6k
PAIM40PAIM15
Hz
PAIM25
TL(d
B)
0 500 1.000 1.500 2.000 2.500 3.000 3.500 4.000 4.500 5.000 5.500 6.000
PAIM15 with sheet PAIM25 with sheet PAIM40 with sheet
Hz
Transmission Loss (dB)
PAIM
PAIM
52
GENERAL CATALOGUEAKUSTIKABSORBER
SPECIFICATIONS
PDM
Beige colour perforated PVC facing, absorbing polyurethane foam and 5 Kg/m2 heavy viscoelastic mass.
Lining interior of soundproof cabins and vehicles, good absorption, and damping sheet that increases the mass and dampens vibrations.
15 mm. 25 mm. 40 mm.
1200 x 1000 mm. Sheets.15 mm. thick, 8 Sheets per box.25 mm. thick, 5 Sheets per box.40 mm. thick, 3 Sheets per box.
Composition
Applications
Formats
15 mm.
25 mm.
40 mm.
Beige colour perforated PVC
facing, absorbing polyurethane foam and 5 Kg/m2 heavy
viscoelastic mass.
Overall air-borne noise
isolation use
Type CodeSELF-
ADHESIVERw
(dB)
PDM-15 sheet 26108 - 12
PDM-15 A sheet 26102 x 12
PDM-25 sheet 26110 - 12
PDM-25 A sheet 26104 x 12
PDM-40 sheet 26112 - 20
PDM-40 A sheet 26106 x 20
Thicknesses
• Measurements according to UNE-EN ISO 140-3 standard (December 1995) Acoustic Isolation of Construction Materials in Laboratory Measurements.
• Corresponds completely with ISO 140-3(1995) standard.
• Cancels and substitutes UNE 74-040/3 (1984) standard.
• Calculations according to NBECA88.
53
50,00
45,00
40,00
35,00
30,00
25,00
20,00
15,00
10,00
5,00
0
PDM
PDM
Absorption coefficient
1
900m
800m
700m
600m
500m
400m
300m
200m
100m
0m
0 500 1k 1,5k 2k 2,5k 3k 3,5k 4k 4,5k 5k 5,5k 6k
PDM40PDM15
Hz
PDM25
TL(d
B)
0 500 1.000 1.500 2.000 2.500 3.000 3.500 4.000 4.500 5.000 5.500 6.000
PDM15 with sheet PDM25 with sheet PDM40 with sheet
Hz
Transmission Loss (dB)
54
GENERAL CATALOGUEAKUSTIKABSORBER
SPECIFICATIONS
PFM
Black unwoven film, absorbing polyurethane foam and 5 Kg/m2 heavy viscoelastic mass.
Lining interior of soundproof cabins and vehicles, good absorption, and damping sheet that increases the mass and dampens vibrations.
15 mm. 25 mm. 40 mm.
1200 x 1000 mm. Sheets.15 mm. thick, 8 Sheets per box.25 mm. thick, 5 Sheets per box.40 mm. thick, 3 Sheets per box.
Composition
Applications
Formats
15 mm.
25 mm.
40 mm.
Black unwoven film, absorbing
polyurethane foam and 5 Kg/m2 heavy
viscoelastic mass.
Overall air-borne noise
isolation use
Type CodeSELF-
ADHESIVERw
(dB)
PFM-15 sheet 26135 - 14
PFM-15 A sheet 26138 x 14
PFM-25 sheet 26136 - 14
PFM-25 A sheet 26139 x 14
PFM-40 sheet 26137 - 14
PFM-40 A sheet 26140 x 14
Thicknesses
• Measurements according to UNE-EN ISO 140-3 standard (December 1995) Acoustic Isolation of Construction Materials in Laboratory Measurements.
• Corresponds completely with ISO 140-3(1995) standard.
• Cancels and substitutes UNE 74-040/3 (1984) standard.
• Calculations according to NBECA88.
55
50,00
45,00
40,00
35,00
30,00
25,00
20,00
15,00
10,00
5,00
0
PFM
PFM
Absorption coefficient
1
900m
800m
700m
600m
500m
400m
300m
200m
100m
0m
0 500 1k 1,5k 2k 2,5k 3k 3,5k 4k 4,5k 5k 5,5k 6k
PFM40PFM15
Hz
PFM25
TL(d
B)
0 500 1.000 1.500 2.000 2.500 3.000 3.500 4.000 4.500 5.000 5.500 6.000
PFM15 with sheet PFM25 with sheet PFM40 with sheet
Hz
Transmission Loss (dB)
56
GENERAL CATALOGUEAKUSTIKABSORBER
SPECIFICATIONS
PIM
Fiberglass facing and absorbing polyurethane foam and 5 Kg/m2 heavy viscoelastic mass.
Thermal insulation, good resistance to hydrocarbon damage and not very good acoustic absorber but good isolator and damping sheet that increases the mass and dampens vibrations.
15 mm. 25 mm. 40 mm.
1200 x 1000 mm. Sheets.15 mm. thick, 8 Sheets per box.25 mm. thick, 5 Sheets per box.40 mm. thick, 3 Sheets per box.
Composition
Applications
Formats
15 mm.
25 mm.
40 mm.
Fiberglass facing and absorbing
polyurethane foam and 5 Kg/m2 heavy
viscoelastic mass.
Overall air-borne noise
isolation use
Type CodeSELF-
ADHESIVERw
(dB)
PIM-15 sheet 26119 - 19
PIM-15 A sheet 26113 x 19
PIM-25 sheet 26120 - 19
PIM-25 A sheet 26114 x 19
PIM-40 sheet 26121 - 21
PIM-40 A sheet 26115 x 21
Thicknesses
• Measurements according to UNE-EN ISO 140-3 standard (December 1995) Acoustic Isolation of Construction Materials in Laboratory Measurements.
• Corresponds completely with ISO 140-3(1995) standard.
• Cancels and substitutes UNE 74-040/3 (1984) standard.
• Calculations according to NBECA88.
57
60,00
50,00
40,00
30,00
20,00
10,00
0
PIM
PIM
Absorption coefficient
1
900m
800m
700m
600m
500m
400m
300m
200m
100m
0m
0 500 1k 1,5k 2k 2,5k 3k 3,5k 4k 4,5k 5k 5,5k 6k
PIM40PIM15 PIM25
TL(d
B)
0 500 1.000 1.500 2.000 2.500 3.000 3.500 4.000 4.500 5.000 5.500 6.000
PIM15 with sheet PIM25 with sheet PIM40 with sheet
Transmission Loss (dB)
Hz
Hz
58
GENERAL CATALOGUEAKUSTIKABSORBER
SPECIFICATIONS
PSM
Black PU film, absorbing polyurethane foam and 5 Kg/m2 heavy viscoelastic mass.
Absorbent lining of soundproof cabins or vehicles where the danger of hydrocarbons or water coming in contact with the absorbent material exists and damping sheet that increases the mass and dampens vibrations.
15 mm. 25 mm. 40 mm.
1200 x 1000 mm. Sheets.15 mm. thick, 8 Sheets per box.25 mm. thick, 5 Sheets per box.40 mm. thick, 3 Sheets per box.
Composition
Applications
Formats
15 mm.
25 mm.
40 mm.
Black PU film, absorbing
polyurethane foam and 5 Kg/m2 heavy
viscoelastic mass.
Overall air-borne noise
isolation use
Type CodeSELF-
ADHESIVERw
(dB)
PSM-15 sheet 26107 - 14
PSM-15 A sheet 26101 x 14
PSM-25 sheet 26109 - 17
PSM-25 A sheet 26103 x 17
PSM-40 sheet 26111 - 20
PSM-40 A sheet 26105 x 20
Thicknesses
• Measurements according to UNE-EN ISO 140-3 standard (December 1995) Acoustic Isolation of Construction Materials in Laboratory Measurements.
• Corresponds completely with ISO 140-3(1995) standard.
• Cancels and substitutes UNE 74-040/3 (1984) standard.
• Calculations according to NBECA88.
59
40,00
35,00
30,00
25,00
20,00
15,00
10,00
5,00
0
PSM
PSM
Absorption coefficient
1
900m
800m
700m
600m
500m
400m
300m
200m
100m
0m
0 500 1k 1,5k 2k 2,5k 3k 3,5k 4k 4,5k 5k 5,5k 6k
PSM40PSM15
Hz
PSM25
TL(d
B)
0 500 1.000 1.500 2.000 2.500 3.000 3.500 4.000 4.500 5.000 5.500 6.000
PSM15 with sheet PSM25 with sheet PSM40 with sheet
Hz
Transmission Loss (dB)
60
GENERAL CATALOGUEAKUSTIKABSORBER
SPECIFICATIONS
PD30M
Beige perforated PVC facing, absorbing polyurethane foam and 5 Kg/m2 heavy viscoelastic mass inserted within.
Lining interior of yacht engine rooms or sport crafts, good absorption and damping sheet that increases the mass and dampens vibrations.
30 mm.
1200 x 1000 mm. Sheets.30 mm. thick, 4 sheets per box.
Composition
Applications
Formats
30 mm.
Beige perforated PVC facing,
absorbing polyurethane foam and 5 Kg/m2 heavy
viscoelastic mass inserted within.
Overall air-borne noise
isolation use
Type CodeSELF-
ADHESIVERw
(dB)
PD30M 26046 - 27
Thicknesses
• Measurements according to UNE-EN ISO 140-3 standard (December 1995) Acoustic Isolation of Construction Materials in Laboratory Measurements.
• Corresponds completely with ISO 140-3(1995) standard.
• Cancels and substitutes UNE 74-040/3 (1984) standard.
• Calculations according to NBECA88.
61
50,00
45,00
40,00
35,00
30,00
25,00
20,00
15,00
10,00
5,00
0
PD30M
PD30M
Absorption coefficient
1
900m
800m
700m
600m
500m
400m
300m
200m
100m
0m
0 500 1k 1,5k 2k 2,5k 3k 3,5k 4k 4,5k 5k 5,5k 6k
PD30M
Hz
TL(d
B)
0 500 1.000 1.500 2.000 2.500 3.000 3.500 4.000 4.500 5.000 5.500 6.000
PD30M with sheet
Hz
Transmission Loss (dB)
62
GENERAL CATALOGUEAKUSTIKABSORBER
SPECIFICATIONS
FAI30M
Aluminium facing with fiberglass support, M-1 class fire-resistant absorbing polyurethane foam and 5 Kg/m2 heavy viscoelastic mass inserted within.
Thermal insulation, M-1 class fire-resistant behaviour, good resistance to hydrocarbon damage and not very good acoustic absorber but good isolator and damping sheet that increases the mass and dampens vibrations in nautical applications.
30 mm.
1200 x 1000 mm. Sheets.30 mm. thick, 4 sheets per box.
Composition
Applications
Formats
30 mm.
Aluminium facing with fiberglass support, M-1
class fire-resistant absorbing
polyurethane foam and 5 Kg/m2 heavy
viscoelastic mass inserted within.
Overall air-borne noise
isolation use
Tipo CódigoAUTO-
ADHESIVORw
(dB)
FAI30M 26275 - 29
Thicknesses
• Measurements according to UNE-EN ISO 140-3 standard (December 1995) Acoustic Isolation of Construction Materials in Laboratory Measurements.
• Corresponds completely with ISO 140-3(1995) standard.
• Cancels and substitutes UNE 74-040/3 (1984) standard.
• Calculations according to NBECA88.
63
55,00
50,00
45,00
40,00
35,00
30,00
25,00
20,00
15,00
10,00
5,00
0
FAI30M
FAI30M
Absorption coefficient
1
900m
800m
700m
600m
500m
400m
300m
200m
100m
0m
0 500 1k 1,5k 2k 2,5k 3k 3,5k 4k 4,5k 5k 5,5k 6k
FAI30M
Hz
TL(d
B)
0 500 1.000 1.500 2.000 2.500 3.000 3.500 4.000 4.500 5.000 5.500 6.000
FAI30M with sheet
Hz
Transmission Loss (dB)
64
GENERAL CATALOGUEAKUSTIKABSORBER
SPECIFICATIONS
PT
Self-extinguishable polyurethane honeycomb foam.
Thermal insulation applications, good acoustic absorber and decorative.
30 mm. 50 mm.
2000 x 1000 mm. Sheets.30 mm. thick, packages of 40 m2. 50 mm. thick, packages of 20 m2.
Composition
Applications
Formats
30 mm.
50 mm.
Self-extinguishable polyurethane
honeycomb foam.
Overall air-borne noise
isolation use
Tipo CódigoAUTO-
ADHESIVORw
(dB)
PT-30 26301 - 8
PT-30 A 26302 x 8
PT-50 26311 - 8
PT-50 A 26312 x 8
Thicknesses
• Measurements according to UNE-EN ISO 140-3 standard (December 1995) Acoustic Isolation of Construction Materials in Laboratory Measurements.
• Corresponds completely with ISO 140-3(1995) standard.
• Cancels and substitutes UNE 74-040/3 (1984) standard.
• Calculations according to NBECA88.
65
30,00
25,00
20,00
15,00
10,00
5,00
0
PT
PT
Absorption coefficient
1
900m
800m
700m
600m
500m
400m
300m
200m
100m
0m
0 500 1k 1,5k 2k 2,5k 3k 3,5k 4k 4,5k 5k 5,5k 6k
PT30
Hz
PT50
TL(d
B)
0 500 1.000 1.500 2.000 2.500 3.000 3.500 4.000 4.500 5.000 5.500 6.000
PT30 with sheet PT50 with sheet
Hz
Transmission Loss (dB)
66
GENERAL CATALOGUEAKUSTIKABSORBER
SPECIFICATIONS
PT FIRE-RESISTANT
M-1 class fire-resistant melamine honeycomb foam.
Thermal insulation, M-1 class fire-resistant behaviour, very good acoustic absorber and decorative.
30 mm. 50 mm.
1200 x 600 mm. Sheets.
Composition
Applications
Formats
30 mm.
50 mm.
M-1 class fire-resistant melamine honeycomb foam.
Overall air-borne noise
isolation use
Tipo CódigoAUTO-
ADHESIVORw
(dB)
PT-FIRE-RESISTANT B/30 26351 - 9
PT-FIRE-RESISTANT B/50 26352 - 10
PT-FIRE-RESISTANT B/30 26354 x 9
PT-FIRE-RESISTANT B/50 26353 x 10
Thicknesses
• Measurements according to UNE-EN ISO 140-3 standard (December 1995) Acoustic Isolation of Construction Materials in Laboratory Measurements.
• Corresponds completely with ISO 140-3(1995) standard.
• Cancels and substitutes UNE 74-040/3 (1984) standard.
• Calculations according to NBECA88.
67
25,00
20,00
15,00
10,00
5,00
0
PT FIRE-RESISTANT
PT FIRE-RESISTANT
Absorption coefficient
1
900m
800m
700m
600m
500m
400m
300m
200m
100m
0m
0 500 1k 1,5k 2k 2,5k 3k 3,5k 4k 4,5k 5k 5,5k 6k
PT30 FIRE-RESISTANT
Hz
PT50 FIRE-RESISTANT
TL(d
B)
0 500 1.000 1.500 2.000 2.500 3.000 3.500 4.000 4.500 5.000 5.500 6.000
PT30 FIRE-RESISTANT with sheet PT50 FIRE-RESISTANT with sheet
Hz
Transmission Loss (dB)
68
GENERAL CATALOGUEAKUSTIKABSORBER
SPECIFICATIONS
PT FIREABSORBER
M1 Fire resistant Polyurethane foam for absorption purpose.
Specially interesting for those applications where fire resistance, high noise absorption coefficient, thermal insulation and good tear resistance is required.
30 mm. 50 mm.
1000 x 1000 mm. Sheets.
Composition
Applications
Formats
30 mm.
50 mm.
Mousse de polyuréthane
absorbante ignifuge M-1.
Overall air-borne noise
isolation use
Tipo CódigoAUTO-
ADHESIVORw
(dB)
PT-30 FIREABSORBER 26331 - 9
PT-30A FIREABSORBER 26333 x 9
PT-50 FIREABSORBER 26332 - 6
PT-50A FIREABSORBER 26334 x 6
Thicknesses
• Measurements according to UNE-EN ISO 140-3 standard (December 1995) Acoustic Isolation of Construction Materials in Laboratory Measurements.
• Corresponds completely with ISO 140-3(1995) standard.
• Cancels and substitutes UNE 74-040/3 (1984) standard.
• Calculations according to NBECA88.
69
35,00
30,00
25,00
20,00
15,00
10,00
5,00
0
PT FIREABSORBER
PT FIREABSORBER
Absorption coefficient
1
900m
800m
700m
600m
500m
400m
300m
200m
100m
0m
0 500 1k 1,5k 2k 2,5k 3k 3,5k 4k 4,5k 5k 5,5k 6k
PT30 FIREABSORBER
Hz
PT50 FIREABSORBER
TL(d
B)
0 500 1.000 1.500 2.000 2.500 3.000 3.500 4.000 4.500 5.000 5.500 6.000 6.400
PT30 FIREABSORBER PT50 FIREABSORBER
Hz
Transmission Loss (dB)
70
GENERAL CATALOGUEAKUSTIKABSORBER
SPECIFICATIONS
HEAVY MASSES
Rubber elastomer compound mixed with Barite.
Designed for the damping of metallic plates and airborne noise isolation.
2 mm. 4 mm.
1230 x 1030 mm. Sheets
Composition
Applications
Formats
2 mm.
4 mm.
Specifically designed for
the damping of vibrations on
metallic plates and airborne noise
isolation
Overall air-borne noise
isolation use
Type CodeSELF-
ADHESIVE125 Hz
250 Hz
500 Hz
1000 Hz
2000 Hz
4000 Hz
MP5 A
26603 x 9 11 16 15 16 18
MP10 A
26604 x 11 13 17 17 18 26
MP5 AA
26605 x 9 11 16 15 16 18
MP10 AA
26606 x 11 13 17 17 18 26
Thicknesses
• Measurements according to UNE-EN ISO 140-3 standard (December 1995) Acoustic Isolation of Construction Materials in Laboratory Measurements.
• Corresponds completely with ISO 140-3(1995) standard.
• Cancels and substitutes UNE 74-040/3 (1984) standard.
• Calculations according to NBECA88.
71
HEAVY MASSES
HEAVY MASSES
Absorption coefficient
Transmission Loss (dB)
MP5 HEAVY MASSES
Hz
MP10 HEAVY MASSES
1
900m
800m
700m
600m
500m
400m
300m
200m
100m
0m
0 500 1k 1,5k 2k 2,5k 3k 3,5k 4k 4,5k 5k 5,5k 6k
TL(d
B)
MP5 HEAVY MASSES MP10 HEAVY MASSES
Hz
30,00
25,00
20,00
15,00
10,00
5,00
0
0 500 1.000 1.500 2.000 2.500 3.000 3.500 4.000 4.500 5.000 5.500 6.000
72
GENERAL CATALOGUEAKUSTIKABSORBER
SPECIFICATIONS
PAVIABSORBER
1- Antiskid Mat2- Antivibration elastomeric (EPDM) closed cell foam.
Isolation of noise and vibrations in industrial, agricultural vehicle cabins.
13 mm.
1200 x 1000 mm. Sheets.
Composition
Applications
Formats
13 mm
Antiskid mat with noise and
vibration isolation properties.
Overall air-borne noise
isolation use
Type CodeSELF-
ADHESIVERw
(dB)
PAVIABSORBER (PAV.CIR.+ EPDM)
26701 - 22
PAVIABSORBER A (PAV.CIR.+ EPDM)
26703 x 22
Thicknesses
• Measurements according to UNE-EN ISO 140-3 standard (December 1995) Acoustic Isolation of Construction Materials in Laboratory Measurements.
• Corresponds completely with ISO 140-3(1995) standard.
• Cancels and substitutes UNE 74-040/3 (1984) standard.
• Calculations according to NBECA88.
73
PAVIABSORBER
PAVIABSORBER
Absorption coefficient
Transmission Loss (dB)
1
900m
800m
700m
600m
500m
400m
300m
200m
100m
0m
0 500 1k 1,5k 2k 2,5k 3k 3,5k 4k 4,5k 5k 5,5k 6k
PAVIABSORVER
Hz
TL(d
B)
PAVIABSORVER
Hz
60,00
50,00
40,00
30,00
20,00
10,00
0
0 500 1.000 1.500 2.000 2.500 3.000 3.500 4.000 4.500 5.000 5.500 6.000
74
GENERAL CATALOGUEAKUSTIKABSORBER
SPECIFICATIONS
PYRAMIDAL GRAY
Self-extinguishable polyurethane honeycomb foam.
Thermal insulation applications, good acoustic absorber and decorative.
30 mm. 50 mm.
960 X 960 mm. Sheets.
Composition
Applications
Formats
30 mm.
50 mm.
Self-extinguishable polyurethane
honeycomb foam.
Overall air-borne noise
isolation use
Type CodeSELF-
ADHESIVERw
(dB)
PYRAMIDAL 30 sheet 26801 - 13
PYRAMIDAL 30A sheet 26802 x 13
PYRAMIDAL 50 sheet 26803 - 12
PYRAMIDAL 50A sheet 26804 x 12
Thicknesses
• Measurements according to UNE-EN ISO 140-3 standard (December 1995) Acoustic Isolation of Construction Materials in Laboratory Measurements.
• Corresponds completely with ISO 140-3(1995) standard.
• Cancels and substitutes UNE 74-040/3 (1984) standard.
• Calculations according to NBECA88.
75
PYRAMIDAL GRAY
PYRAMIDAL GRAY
Absorption coefficient
Transmission Loss (dB)
1
900m
800m
700m
600m
500m
400m
300m
200m
100m
0m0 500 1k 1,5k 2k 2,5k 3k 3,5k 4k 4,5k 5k 5,5k 6k
PYRAMIDAL GRAY 30 PYRAMIDAL GRAY 50
Hz
TL(d
B)
PYRAMIDAL GRAY 30 PYRAMIDAL GRAY 50
Hz
50,00
45,00
40,00
35,00
30,00
25,00
20,00
15,00
10,00
5,00
0,00
0 500 1.000 1.500 2.000 2.500 3.000 3.500 4.000 4.500 5.000 5.500 6.000
76
GENERAL CATALOGUEAKUSTIKABSORBER
SPECIFICATIONS
PYRAMIDALFIRE-RESISTANT
M-1 class fire-resistant melamine honeycomb foam.
Thermal insulation, M-1 class fire-resistant behaviour, very good acoustic absorber and decorative.
30 mm. 50 mm.
1200 x 600 mm. Sheets.
Composition
Applications
Formats
30 mm.
50 mm.
Espuma de melamina ignífuga
M-1 alveolar.
Overall air-borne noise
isolation use
Type CodeSELF-
ADHESIVERw
(dB)
PYRAMIDAL FIRE-RESISTANT 30 Sheet
26805 - 9
PYRAMIDAL FIRE-RESISTANT A 30 Sheet
26807 x 9
PYRAMIDAL FIRE-RESISTANT 50 Sheet
26806 x 11
PYRAMIDAL FIRE-RESISTANT A 50 Sheet
26808 - 11
Thicknesses
• Measurements according to UNE-EN ISO 140-3 standard (December 1995) Acoustic Isolation of Construction Materials in Laboratory Measurements.
• Corresponds completely with ISO 140-3(1995) standard.
• Cancels and substitutes UNE 74-040/3 (1984) standard.
• Calculations according to NBECA88.
77
PYRAMIDAL FIRE-RESISTANT
PYRAMIDAL FIRE-RESISTANT
Absorption coefficient
Transmission Loss (dB)
1
900m
800m
700m
600m
500m
400m
300m
200m
100m
0m
0 500 1k 1,5k 2k 2,5k 3k 3,5k 4k 4,5k 5k 5,5k 6k
PYRAMIDAL FIRE-RESISTANT 30 PYRAMIDAL FIRE-RESISTANT 50
Hz
TL(d
B)
PYRAMIDAL FIRE-RESISTANT 30 PYRAMIDAL FIRE-RESISTANT 50
Hz
90,00
80,00
70,00
60,00
50,00
40,00
30,00
20,00
10,00
0
0 500 1.000 1.500 2.000 2.500 3.000 3.500 4.000 4.500 5.000 5.500 6.000
78
GENERAL CATALOGUEAKUSTIKABSORBER
SPECIFICATIONS
CAI
Aluminium facing with fibreglass support, M-1 F1 class absorbing foam.
Thermal insulation, M-1 class fire-resistant, goodresistance to smokes and not very good acoustic absorber but good absorbing isolator.
50 mm.
1200 x 1000 mm. Sheets.
Composition
Applications
Formats
50 mm.
Aluminium facing with fibreglass
support, M-1 F1 class Absorbing
foam.
Overall air-borne noise
isolation use
Type CodeSELF-
ADHESIVERw
(dB)
CAI 50 28401 - 33
Thicknesses
• Measurements according to UNE-EN ISO 140-3 standard (December 1995) Acoustic Isolation of Construction Materials in Laboratory Measurements.
• Corresponds completely with ISO 140-3(1995) standard.
• Cancels and substitutes UNE 74-040/3 (1984) standard.
• Calculations according to NBECA88.
79
CAI
CAI
Absorption coefficient
Transmission Loss (dB)
1
900m
800m
700m
600m
500m
400m
300m
200m
100m
0m
0 500 1k 1,5k 2k 2,5k 3k 3,5k 4k 4,5k 5k 5,5k 6k
CAI 50
Hz
TL(d
B)
CAI 50
Hz
120,00115,00110,00105,00100,0095,0090,0085,0080,0075,0070,0065,0060,0055,0050,0045,0040,0035,0030,0025,0020,0015,0010,005,00
00 400 800 1.200 1.600 2.000 2.400 2.800 3.200 3.600 4.000 4.400 4.800 5.200 5.600 6.000 6.400
80
GENERAL CATALOGUEAKUSTIKABSORBER
SPECIFICATIONS
CAIM
Aluminium facing with fibreglass support, M-1 F1 classabsorbing foam and 5 Kg/m2 heavy viscoelastic mass.
Thermal insulation, M-1 class fire-resistant, goodresistance to smoke and not very good acoustic absorber but good absorbing isolator with damping layer, which increases the mass and dampens vibrations in marine applications.
50 mm.
1200 x 1000 mm. Sheets.
Composition
Applications
Formats
50 mm.
Aluminium facing with fibreglass
support, M-1 F1 class absorbing
foam and 5 Kg/m2
heavy viscoelastic mass.
Overall air-borne noise
isolation use
Type CodeSELF-
ADHESIVERw
(dB)
CAIM 50 28402 - 34
Thicknesses
• Measurements according to UNE-EN ISO 140-3 standard (December 1995) Acoustic Isolation of Construction Materials in Laboratory Measurements.
• Corresponds completely with ISO 140-3(1995) standard.
• Cancels and substitutes UNE 74-040/3 (1984) standard.
• Calculations according to NBECA88.
81
CAIM
CAIM
Absorption coefficient
Transmission Loss (dB)
1
900m
800m
700m
600m
500m
400m
300m
200m
100m
0m
0 500 1k 1,5k 2k 2,5k 3k 3,5k 4k 4,5k 5k 5,5k 6k
CAIM 50
Hz
TL(d
B)
CAIM 50
Hz
120,00115,00110,00105,00100,0095,0090,0085,0080,0075,0070,0065,0060,0055,0050,0045,0040,0035,0030,0025,0020,0015,0010,005,00
0
0 400 800 1.200 1.600 2.000 2.400 2.800 3.200 3.600 4.000 4.400 4.800 5.200 5.600 6.000 6.400
82
GENERAL CATALOGUEAKUSTIKABSORBER
SPECIFICATIONS
MARINE
Aluminum coating with fiberglass backing. M1 fire smoke features F1.
Thermic Isolation, f M1 behavior. Good behavior to smoke F1. Very good isolator but is not a good absorbent.
50 mm.
1000 x 610 mm. Sheets.
Composition
Applications
Formats
50 mm.
Aluminum coating with fiberglass
backing. M1 fire smoke features
F1.
Overall air-borne noise
isolation use
Type CodeSELF-
ADHESIVERw
(dB)
MARINE 28411 - 33
Thicknesses
• Measurements according to UNE-EN ISO 140-3 standard (December 1995) Acoustic Isolation of Construction Materials in Laboratory Measurements.
• Corresponds completely with ISO 140-3(1995) standard.
• Cancels and substitutes UNE 74-040/3 (1984) standard.
• Calculations according to NBECA88.
83
CAIM
CAIM
Absorption coefficient
Transmission Loss (dB)
1
900m
800m
700m
600m
500m
400m
300m
200m
100m
0m
0 500 1k 1,5k 2k 2,5k 3k 3,5k 4k 4,5k 5k 5,5k 6k
MARINE
Hz
TL(d
B)
MARINE
Hz
120,00115,00110,00105,00100,0095,0090,0085,0080,0075,0070,0065,0060,0055,0050,0045,0040,0035,0030,0025,0020,0015,0010,005,00
0
0 400 800 1.200 1.600 2.000 2.400 2.800 3.200 3.600 4.000 4.400 4.800 5.200 5.600 6.000 6.400
84
GENERAL CATALOGUEAKUSTIKABSORBER
SPECIFICATIONS
FIXING NAIL + NAUTIC COVER
NAUTIC COVER
Mechanical fixing systems for our soundproofing materials AKUSTIKABSORBER.
Installation steps:
1. Simply use a polyurethane sealant, rivets or welding to secure the spikes.
2. On squeezing the adhesive it will seep through, allow it to dry for about 12 hours.
3. Place one nail every 40 or 50 cm and then press the AKUSTIKABSORBER material against the nail evenly.
4. Insert the washer and press against the isolation surface
5. Trim any surplus nail and fit the rubber plug.
32 mm. 44 mm.Heights
32 mm.
44 mm.
Mechanical fixing systems for our soundproofing
materials AKUSTIKABSORBER.
Type Code
FIXING NAIL 32 26401
FIXING NAIL 44 26402
TAPA NAÚTICA 26409
The AMC MECANOCAUCHO® range of anti vibration mounts can solve vibration problems in all types of machinery, mobile or static, thus protecting people and the environment from the harmful effects of noise and vibration. Machinery, which, by virtue of its design has reciprocating or rotating parts, creates vibration to some degree through imbalance of the moving parts. It’s necessary an anti vibration mounts because this vibration produced by a machine leads to different problems, such as a reduction in the machine’s useful life through part wear, plus the transmission of this vibration to other noninsulated adjacent structures, giving rise to problems of noise and vibration transmission.
Spring mount is necessary in all machinery, which, by virtue of its design, has reciprocating or rotating parts, creates vibration to some degree through the imbalance of the moving parts. This vibration produced by a machine leads to different problems, such as a reduction in the machine’s useful life through part wear, plus the transmission of this vibration to other non-insulated adjacent structures, giving rise to problems of noise and vibration transmission. It is therefore important to install a spring mount to machinery.
OTHER AMC PRODUCTS
VIBRABSORBER +
RUBBER METAL SUPPORTS
VIBRATION ISOLATOR PRODiscover the app that helps you to find the CORRECT VIBRATION ISOLATOR for your application.
Let your phone discover the main disturbing frequencies of your application.
SIMPLE, EASY & FREE!
OTHER AMC PRODUCTS
AKUSTIK +
AKUSTIK
Acoustic hangers are elastic elements used mostly for ceiling suspension in order to achieve an vibration and noise insulation. There is a wide range of acoustic hangers, that can be used not only for V ceiling suspension but also for machinery vibration isolation like air conditions units ventilators, pipe suspension etc. The elastic suspension of different elements in ceilings avoid the propagation of vibration and structural born noise from one floor to the other.
Akustik+Sylomer® is the trademark of a new product range of acoustic hangers. Acoustic suspended ceilings are an excellent way of preventing airborne noise from below passing into the ceiling structure, or preventing noise/vibration from the floor above entering the room below. Sylomer® is a well known elastomer that can give the extra isolation that can make the difference in the acoustic isolation of the room.
San SebastiánAsteasu
24 h.
48 h.
72 h.
STOCK AT YOUR DISPOSAL
CUSTOMIZEDCUT SERVICE
AMC MECANOCAUCHO® can provide customized cut service.
Do not hesitate to send us by email the drawings in dxf format.sales@amcsa.es
Aplicaciones Mecánicas del Caucho, S.A.Industrialdea Parc 35 A. • E-20.159
ASTEASU (Gipuzkoa) EspañaTel.: + 34 943 69 61 02 • Fax: + 34 943 69 62 19
e-mail: sales@amcsa.es www.akustik.com
www.mecanocaucho.com
D.L
. BI-3
24-2
016
top related