gas welding and brazing - star international
Post on 19-Oct-2021
3 Views
Preview:
TRANSCRIPT
First Edition
Worldwide Marine and Offshore Services
GAS WELDING AND BRAZINGGAS WELDING AND BRAZING
Worldwide Marine and Offshore Services
NEW DEPOT
NOW OPEN IN
SOUTHAMPTON
Star International supplies all types of refrigerants, welding gases, electric welding machines, fire service and safety equipment to the Marine and Offshore Market.
For a complete list of our products and services please visit our website:
www.star-international.co.uk
STAR DISTRIBUTION CENTRES ACROSS THE WORLD
• Argentina (to be opened shortly) • Australia • Bahrain • Belgium • Brazil (to be opened shortly)
• Canada • China • Cyprus • Denmark • Dubai • France • Germany • Greece • Hungary • Holland
• Ireland • Israel • Italy • Malaysia • Netherlands • Nigeria • Philippines • Poland
• Russia (to be opened shortly) • UAE • Singapore • South Africa • Spain • Sweden
• Thailand • United Kingdom • United States
STAR INTERNATIONALNew Warehouses and Head Office, Wirral United Kingdom
Southampton Depot:Star International, Unit 4 Westwood Court, Calmore Industrial Estate,
Totton, Southampton SO40 3WX United Kingdom
1
Star International offers a wide range of productsthat are intended for welding, cutting and solderingtechniques, as well as the related processesusing fuel gases, oxygen, shielding gases or air.
When supplying a broad line-up of welding equipment, compliance with safety regulationsmust be ensured in order to protect the individualworking with gases.
All equipment products are designed and manufactured according to EN and CE standardswith safety in focus. By purchasing Star gas equipment, you are making an investment inyour future. Our premium products will help toincrease your productivity in a manner that is ergonomic and user-friendly.
All Star gas regulators, torches, torch shanksand cutting attachments come with a two year conditional warranty.
INTRODUCTION
For more information visit our website: www.star-international.co.uk
Star Distribution Centres Worldwide Inside front cover
Introduction 1
X21® Welding and cutting equipment 3
X21 Original is a combined gas welding and gas cutting torch for manual work. It is a pressure torch designed on the basis of the stringent demands stipulated by standard EN ISO 5172.
Gas welding and brazing rods 8
Star International products for gas welding and brazing
Welding on-board ships 10
Welding Consultancy Service Welding Seminars Onboard Welding Training Courses Consultancy for Marine Academies Underwater Welding & Cutting
Hypertherm Powermax30® AIR and Powermax45 XP® 11
Powermax30® AIR The revolutionary, self-contained, ‘plug in and use’ Plasma System. Powermax45 XP®
Professional-grade plasma system for cutting 16 mm thick metal, gouging, and marking.
Oxy-Acetylene Integra® cylinders - our safest yet! 16 Star International products for gas welding and braising
Star/Marine Gas Cylinder Comparison Chart
CONTENTS
1
3
2
4
5
2 For more information visit our website: www.star-international.co.uk
Unicontrol 500 Ox HTPart No: 00640058Hexagonal nutPart No: 00640087
SMOOTHFLO®
ODOROX®/OxygenPart No: 00640059
SAFE-GUARD-5 OxPart No: 00640060
SMOOTHFLO®
AcetylenePart No: 00640062
SAFE-GUARD-5 AcPart No: 00640063
Unicontrol 500 Ac HTPart No: 00640061Hexagonal nutPart No: 00640088
OXYGEN
ACETYLENE
1 X21® Welding and cutting equipment
X21® Welding and Cutting SetPart No: No: 00640000
X21 Cutting Attachment 90° Part No: 00640141X21 Cutting Attachment 75° Part No: 00640142
Flashback Arrestor SAFE-GUARD-5SAFE-GUARD-5 has five safety functions:• Turns off the gas supply in the event of penetrating flashbacks• Stops and extinguishes penetrating flashbacks• Prevents backflow• Turns off the gas supply in the even
Flashback Arrestor SUPER 55 - Part No: 00640064
SUPER 55 has four safety functions:• Prevents backflow• Stops and extinguishes back-burning• Cuts off the supply of gas in the event of pervasive backflow• Cuts off the supply of gas in the event of overheating
For more information visit our website: www.star-international.co.uk 3
SAFE-GUARD 5 OxygenPart No: 00640060
SAFE-GUARD 5 AcetylenePart No: 00640063
SUPER 55OxygenPart No: 00640064
SUPER 55AcetylenePart No: 00640143
Welding attachments
l/h mm Part No.
40 0.2 – 0.5 00640065
80 0.5 – 1.0 00640066
160 1.0 – 2.0 00640067
230 2.0 – 3.0 00640068
315 2.0 – 4.0 00640069
400 3.5 – 5.0 00640070
500 4.0 – 6.0 00640071
650 5.0 – 7.0 00640072
800 6.0 – 9.0 00640073
1000 7.0 – 10.0 00640074
1250 9.0 – 14.0 00640075
X21 Handle with non-return valveBV 12 O 6.3Round Part No: 00640076Oval Part No: 00640077
BV 12 G 3/8” Non-return valvesØ 6.3 x 6.3 mm Part No: 00640081Ø 8.0 x 8.0 mm Part No: 00640082
Cutting attachments0° lever Part No: 0064007875° lever Part No: 0064007990° lever Part No: 00640080
Cutting nozzle HA 311 Acetylene3 – 10mm Part No: 0064008310 – 25mm Part No: 0064008425 – 50mm Part No: 0064008550 – 100mm Part No: 00640086
Regulators
Unicontrol 500 is suitable for the majority of industrial gases and can cope with all gas welding, heatingand soldering, as well as the gas cutting of materials up to a thickness of 300 mm.
Work area Content Work Connection Part No. (bar) pressure pressure Inlet Thread Outlet gauge (bar) gauge (bar)
HT nut*
Acetylene 0 – 1.5 0 – 40 0 – 2.5 G ¾” Ext. G 3/8”LH 00640061
Oxygen 0 – 10.0 0 – 315 0 – 16.0 W 21.8 x 1/14” Int. G 3/8” 00640058
Hexagonal nut
Acetylene 0 – 1.5 0 – 40 0 – 2.5 G ¾” Ext. G 3/8” LH 00640088
Oxygen 0 – 10.0 0 – 315 0 – 16.0 W 21.8 x 1/14” Int. G 3/8” 00640087
* Handtight connection
Part No: 00640061 Part No: 00640058 Part No: 00640088 Part No: 00640087
4 For more information visit our website: www.star-international.co.uk
Safety Goggles with shade level 5 for gas welding, soldering andgas cutting.Fully ventilated and also have a flip-front mechanism. CE approved in Accordance with EN 175/EN 166-F.
Safety Goggles for visitors with full-coverage polycarbonate lens in a single Piece. Integral side protection and contoured nose bridge. Perforated Side pieces for fitting extra safety bands. Corresponds with EN166 and EN167.
Accessories
Description Part No.
Radius arm with centre point, big wheel 00640089
Radius arm with centre point, small wheel 00640037
Hole cutting attachment 00640090
Twin wheel cutting guide, big wheels for bevel cutting 00640091
Twin wheel cutting guide, big wheels 00640092
Twin wheel cutting guide, small wheels 00640036
Bushing 00640093
00640037 00640036
Lenses
Lenses to goggles Ø 50 mm
Sealing Area of application/description Qty Part No. level, DIN
Welding glass 4 Gas cutting, aluminium welding, weld and hard-soldering 4 00640094
Welding glass 5 Gas welding of more slender material thicknesses 4 00640095
Welding glass 6 Gas welding and cutting of thicker material thicknesses 4 00640096
Welding glass 7 Gas welding and cutting of thicker material thicknesses 4 00640097
Grinding glass Clear Shatterproof 2 00640098
Safety Goggles
For more information visit our website: www.star-international.co.uk 5
Gas lighter Part No: 00640139Gas saver GS 10 Part No: 00640140
Gas Lighter
Part No: 00640144
Cleaning Needles
Part No: 00640117
Part No: 00331065
Single Hose and Twin HoseAs gas hoses are made of rubber, they are affected by the external environment, e.g. ultraviolet radiation, whichmakes the rubber more brittle. It is therefore important to replace hoses frequently to avoid leaks.
Single Hose and Twin HoseAs gas hoses are made of rubber, they are affected by the external environment, e.g. ultraviolet radiation, whichmakes the rubber more brittle. It is therefore important to replace hoses frequently to avoid leaks. Single Hose – 10 mtrs
Colour Dia mm Type of Gas Part No.
Black 5.3mm Argon/Dry Flow 00640115
Black 6.3mm Argon/Dry Flow 00640116
Twin hose with compression couplings and non-return valves BV 12
Colour Dimension Non-return 5 mtr SB 10 mtr SB Ø mm BV12 valve Part no. Part No.
Blue/Red (X11) 5.0 – 5.0 1/4” 00640118 00640119
Blue/Red (X21) 6.3 – 6.3 3/8” 00640120
6 For more information visit our website: www.star-international.co.uk
Single Hose – 50mtrs
Colour 5 Dia mm Type of Gas Part No.
Blue 6.3mm Oxygen 00640099
Blue 10.0mm Oxygen 00640100
Blue 12.5mm Oxygen 00640101
Orange 6.3mm Propane/Hydrogen 00640102
Orange 8.0mm Propane/Hydrogen 00640103
Orange 10.0mm Propane/Hydrogen 00640104
Black 5.0mm Argon/Dry Flow 00640105
Black 6.3mm Argon/Dry Flow 00640106
Black 5.0mm Argon 00640107
Black 6.3mm Argon 00640108
Twin Hose – 50mtrs
Colour Dia mm Type of Gas Part No.
Blue/Red 5.0 – 5.0 Oxygen/Acetylene 00640109
Blue/Red 6.3 – 6.3 Oxygen/Acetylene 00640110
Blue/Red 8.0 – 8.0 Oxygen/Acetylene 00640111
Blue/Orange 6.3 – 6.3 Oxygen/Propane 00640112
Blue/Orange 6.3 – 8.0 Oxygen/Propane 00640113
Blue/Orange 10 – 10 Oxygen/Propane 00640114
AGA Quick Coupling
Quick coupling for oxygen Hose fitting
For more information visit our website: www.star-international.co.uk 7
Quick coupling without hose fitting
Hoses Fittings & Cap Nuts
Hose fittings for X11 Pro handle, G ¼" according to EN 560 Qty Part No.Hose fitting Ø 5.0 mm 2 00640145Hose fitting Ø 6.3 mm 2 00640146
Hose fittings for regulators and large torches, G �" according to EN 560 Qty Part No.
Hose fitting Ø 5.0 mm 2 00640147Hose fitting Ø 6.3 mm 2 00640148Hose fitting Ø 8.0 mm 2 00640149Hose fitting Ø 10.0 mm 2 00640150
Cap nuts Qty Part No.
For X11 - handle: Cap nut 1+1 00640151Acetylene LH G ¼" + Oxygen G ¼"For regulators and large torches: 1+1 00640152Cap nut acetylene LH G 3/8” + Oxygen G 3/8”Blanking plug 3/8” 301816 00640153
Non-separable (whole)
Hose dimension Ø mm Qty in SB SB pack Part No.
Extension piece 5.0 – 5.0 2 00640154Extension piece 6.3 – 6.3 2 00640155Extension piece 8.0 – 8.0 2 00640156
Separable
Hose dimension Ø mm Qty in SB Part No.
Extension piece 5.0 – 5.0 2 00640157Extension piece 6.3 – 6.3 2 00640158Extension piece 8.0 – 8.0 2 00640159
Oxygen and other gases Part No.
Connection (female): G 3/8” 00640121Hose fitting (male) Ø 5.0 mm 00640122Hose fitting (male) Ø 6.3 mm 00640123Hose Fittings and Cap Nuts 00640124
Acetylene and Hydrogen Part No.
Connection (female): LH G 3/8” 00640125Hose fitting (male) Ø 5.0 mm 00640126Hose fitting (male) Ø 6.3 mm 00640127Hose fitting (male) Ø 8.0 mm 00640128
Extension Pieces
Part No.
Centre piece LH G 3/8” 00640160Centre piece G 3/8” 00640161Centre piece LH G ¼" 00640162Centre piece G ¼" 00640163Centre piece G 3/8” - G ¼" 00640164
Centre Piece for Extension Pieces
Hose Clips - Hose Holder Qty Part No.
Hose clip 08 – 14 mm 4 00640165Hose clip 13 – 20 mm 2 00640166
2 Gas Welding and Brazing Rods
Part Star Products Dia Weigh DescriptionNo. mm Pkt
00630000 Star SI-60 2.0mm 0.5 kg A flux coated cadmium free, seawater resistant, Flux Coated high strength silver rod for joining all types of Silver Solder steel and stainless steel, copper. Copper alloys, nickel and nickel alloys, cast iron, Yorcalbro pipes (Aluminium brass) cunifer pipes 9/10 and 70/30
00630010 Star Silver 45% 2.0mm 0.4 kg Bare cadmium free silver rod for joining of all types of steel, stainless steel, copper, copper alloys, nickel and nickel alloys cast iron and hard metals. The brazing rod gives a very good joint and can be used for brazing nipples, sleeves and unions to copper pipes.
00630011 Star Mild Steel 500mm 2.5mm 1.25 kg A special alloy steel rod containing manganese for toughness. It provides a weld deposit of high strength and ductility. Recommended for oxy/acetylene welding for pipelines and pressure vessels.
00630012 Star Mild Steel 500mm 3.0mm 1.25 kg A special alloy steel rod containing manganese for toughness. It provides a weld deposit of high strength and ductility. Recommended for oxy/acetylene welding for pipelines and pressure vessels.
00630013 Star Alu-Mag 500mm 3.2mm 1.25 kg A general purpose aluminium rod containing 5% magnesium that has excellent corrosion resistance and high strength Suitable for welding magnesium bearing aluminium alloys such as 5251 (N4), 5154 (N5). 5454 (N51) and also heat treatment alloys 6063 (H9), 6061 (H20) and also heat treatable alloys 6063 (N9), 6061 (H20) 6082 (H30)
00630014 Star Coated Bronze 2.4mm 1kg This rod is bronze with a full flux coating providing 500m the added benefit of faster continuous brazing through not not having to flux--dip it is ideally suited for general mild steel work, galvanised steel and dissimilar metal applications.
00630015 Star Coated Bronze 3.2mm 1kg This rod is bronze with a full flux coating providing 500mm the added benefit of faster continuous brazing through not having to flux--dip. It is ideally suited for general mild steel work, galvanised steel and dissimilar metal applications.
8 For more information visit our website: www.star-international.co.uk
Part Star Products Dia Weigh DescriptionNo. mm Pkt
00630016 Star Bronze 500mm 3.2mm 1.0 kg This rod is bronze with a full flux coating and with Similar characteristics. The UTS is approximately 25% greater than Sifredicote No1. and is ideal for high strength production and maintenance application.
006-30017 Star Bronze 500mm 5.0mm 2.5 kg This rod is bronze with a full flux coating and with Bronze-264 similar characteristics. The UTS is approximately 25% greater than Sifredicote No1. and is ideal for high strength production and maintenance application.
00630018 Star Coated Wear-Bro 3.2mm 1.25 kg This rod is bronze No.1 with a full flux coating 500mm providing the added benefit of faster, continuous brazing through not having to flux-dip it is ideally suited for general mild steel work, galvanised steel and dissimilar metal applications.
00630020 Star Coated Cast-Iron 5.0mm 2.5 kg The rod is suitable for full fusion welding of cast iron, providing a high strength weld metal which is easily Machineable. It gives an excellent colour match and has the same structure as a grey cast iron.
For more information visit our website: www.star-international.co.uk 9
3 Welding on board ships
All ships have on-board welding equipment but many ship’s staff are unable to carry out the simplest repairs which could save owners money and time. As a consequence many ships have to berth and bring Engineering companies shore-side to carry out repairs which can be time consuming and expensive.Star International Marine and Offshore Services are pleased to offer the services of T E Andersen Consulting who provide Welding Seminars. They are an independent welding, educational and managementconsultancy; providing monitoring, training and inspection services for the marine industry. They support marine academies around the world and deliver quality work whilst offering a customized approach throughexperienced consultants.
Safety is of prime importance when using any kind of welding equipment.
Services we offer include
Welding Consultancy Service Welding Seminars
Consultancy for Marine AcademiesOnboard Welding Training Courses
Technical Update for ‘Underwater Welding & Cutting’
Underwater welding and cutting does not necessarily mean that you are a diver doing the welding while submerged under water.
On-board a vessel it's much more likely that you have to do welding in a partly submerged compartment where you, as a welder, are above or partly above water but the actual welding takes place below water.
Nevertheless the same stringent procedure and safety precautions must be followed.
10 for more information please e-mail: enquiries@ star-international.co.uk
For more information visit our website: www.star-international.co.uk 11
4 Hypertherm Powermax30® AIR and Powermax45 XP®
Powermax30® AIRThe revolutionary, self-contained, ‘plug in anduse’ Plasma System.
• Easy metal cutting• Built-in air compressor• Fully self-contained• Professional grade plasma system• Can be used in virtually any location
AIR T30 hand torch
Capacity Thickness Cut speed CuttingRecommended 8 mm 500 mm/min 10 mm 250 mm/minSeverance 16 mm 125 mm/min
Power Supply System part number with 4.5 m AIR T30 torch
120-240 V 00650025
Ordering Information
High performing technologyThe new patent-pending consumable designs enable consistent cutting by optimizing the air flow from the compact, internal compressor. Coupled with the highlyeffective moisture removal system, the Powermax30®
AIR provides great cut quality and performance in hot and humid conditions.
Consumable type Torch type Amperage Shield/Deflector Retaining cap Nozzle Swirl ring Electrode
Standard Hand 30 00650027 00650028 00650030 00650029 00650031
Torch consumable parts
Hypertherm genuine accessoriesalso available
Easy-to-setup and operate• Operate it anywhere with the internal air compressor.• Plug into any 120 or 240 V power with Auto- Voltage™ technology and included plug adapters.• Highly portable. The smallest, lightest weight system in its class.
Finish jobs faster• Do more in less time. Fast cutting speeds and superior cut quality result in less secondary operations.• Quickly cut metal grate or rusted metal without retriggering with the continuous pilot arc feature.• One tool to cut a variety of metal types and thicknesses.
Rugged and reliable
• New AIR T30 torch is rugged and designed to withstand the toughest environments.• Robust internal air compressor eliminates the costs associated with an external compressor.• Hypertherm Certified™ reliability ensures performance in the most demanding environments.
System includes
• Power supply, AIR T30 hand torch with 4.5 m lead and work clamp with 4.5 m lead• Operator and safety manuals• 1 nozzle and 1 electrode • Carrying strap
YEAR
WARRANTY
3
YEAR
WARRANTY
1
Worldwide Marine and Offshore Services
Powermax45 XP®
Professional-grade plasma system for cutting 16 mm thickmetal, gouging, and marking.
Duramax Lock standard torch styles
Duramax Lock 75° hand torch
Duramax Lock 15° hand torch
Duramax Lock machine torch
Capacity Thickness Cut speed
Cutting
Recommended 16 mm 500 mm/min
22 mm 250 mm/min
Severance 29 mm
(hand cutting) 125 mm/min
Pierce* 12 mm*Pierce rating for handheld use or with automatic torch height control
Capacity Metal removal rate Groove profile
Gouging
Typical gouge 3.4 kg per hour 3.2 mm D x 6.8 mm W
Easy-to-use with versatile design
• Small size and light weight provides exceptional portability for a 16 mm rated cutting system.• Handheld and mechanized usage with CNC interface and FastConnect™ torch connection.• Patented drag-cutting technology makes it easy to use – even for first‑time operators.• Tackle different jobs with multiple, easy-to-use torch styles.• No need to change the air pressure. Smart Sense™ technology ensures that it is always correctly set.• Mark, score and make precision gouges with new low amp process.
Maximum productivity
• Finish jobs faster with cut speeds one and a half times greater than oxyfuel on 6 mm mild steel.• Spend less time on grinding and edge preparation due to superior cut and gouge quality.• Fast change out of consumables using the new torch disable switch feature.
Rugged and reliable
• Duramax® Lock torches are designed for high-impact and heat resistance.• SpringStart™ technology ensures consistent starting and a more reliable torch.• Hypertherm Certified™ reliability ensures performance in the most demanding environment.
Relative cut performance on mild steel
264% faster on 6 mm
Powermax45 XP
Oxyfuel
Cut s
peed
Thickness6 mm 10 mm 12 mm
12 For more information visit our website: www.star-international.co.uk
Worldwide Marine and Offshore Services
Specifications
Input voltages (± 10%) 230 V, 1-PH, 50-60 Hz 400 V, 3-PH, 50-60 HzInput current @ 6,5 kW 230 V, 1-PH, 33 A 400 V, 3-PH, 10 AOutput current 10-45 A Rated output voltage 145 VDCDuty cycle @ 40°C 50% @ 45 A, 230 V, 1-PH 60% @ 41 A, 230 V, 1-PH 100% @ 32 A, 230 V, 1-PH 50% @ 45 A, 400 V, 3-PH 60% @ 41 A, 400 V, 3-PH 100% @ 32 A, 400 V, 3-PHOpen circuit voltage (OCV) 275 VDC (230 V, CE/CCC) 265 VDC (400 V CE/CCC)Dimensions with handles 442 mm D; 173 mm W; 357 mm H Weight with 6,1 m torch 15 kgGas supply Cutting: air (clean, dry and oil-free), nitrogen, F5 Gouging: air (clean, dry and oil-free), nitrogen, F5 Marking: air (clean, dry and oil-free), argonRecommended gas inlet flow 188 l/min @ 5,9 barrate/pressure Input power cable length 3 mPower supply type Inverter - IGBTEngine drive requirement 12.5 kVA (10 kW) for full 45 A outputElectrical efficiency 88%Recyclability 100%Certifications CCC for use in China. CE, RCM, CU/GOST-TR, UkrSEPRO, and Serbian AAA for use in Europe, Australia, Belarus, Kazakhstan, Russia, Serbia, Ukraine, and other countries where accepted.Warranty Power supply: 3-year Torch: 1-year
Common applicationsProperty/plant maintenance, HVAC and mechanical contracting, general fabrication,plus:
Construction
Maintenance and repair
Agricultural and farm equipment maintenance
Ordering informationBelow are common system configurations which include a power supply, torch, and work cable. Additionalconfigurations are available or a custom configuration can be made.See the next page for details.
Power supplies
Standard power supply
Power supply with CPC portand voltage divider
Power supply with CPC port,voltage divider, and serial port
Standard power supply
Power supply with CPC portand voltage divider
Power supply with CPC port,voltage divider, and serial port
Voltageconfiguration
230 V
230 V
230 V
400 V
400 V
400 V
088130
088131
088144
088145
088132
088133
088146
088147
088134
088148
088141
088155
088139
088153
088135
088148
088136
088150
088140
088154
6,1 mleads
withoutremotependant
6,1 mlead
15,2 mlead
withremotependant
withI/O cables
(no pendant)
10,6 mlead
withremotependant
withremotependant
withoutremotependant
withI/O cables
(no pendant)
15,2 mlead
withoutremotependant
75°hand torch
75° & 15°hand torch
180° full-length machine torch
7,6 m lead
For more information visit our website: www.star-international.co.uk 13
Custom configurations(select power supply, torch, consumable kit, work cable, and other components)
Power supply options
Standard power supply Power supply with CPC port and voltage divider Power supply with CPC port, voltage divider, and serial port
230 V CE/CCC 088093 088106 088107
400 V CE/CCC 088094 088108 088109
Power supply options
Handheld Mechanized Mechanized with ohmic retaining cap
230 V CE/CCC 088093 088106 088107
Torch options
Hand torches Machine torches Robotic torches
Cable length 75° 15° 180° Mini 180° 45° 90° 180°
4.5 m (15') 059476* 059481*
6.1 m (20') 088164 088162
7.6 m (25') 088167 059482* 059464* 059465* 059466*
10.6 m (35') 088168 059483*
15.2 m (50') 088165 088163 088169 059484*
22.8 m (75') 059475* 059472* 059480*
Cable options
Work cables Control cables
Cable length Hand clamp Remote pendant CNC, spade connector, CNC, spade connector, no RS-485 Serial comm, RS-485 divided voltage divided voltage unterminated Serial comm, D-sub
7.6 m 223595 128650 228350 023206 223236 223239
15.2 m 223596 128651 228351 023279 223237 223240
22.8 m 223127 128652
Consumable type Torch type Amperage Nozzle Shield Retaining cap Electrode Swirl ring Deflector
Drag-cutting Hand 45 220941 220818 220854 220842 220857
Mechanized Machine 45 220941 220817 or 2209551 220854 or 2209532 220842 220857
FineCut ® Hand 45 220931 220947
Machine 45 220948 220857
Max control gouging Hand/Machine 25–45 420419 220798 220854 220842 220857
Precision gouging Hand/Machine 10–25 420415 420414 220854 220842 220857
Marking Hand/Machine 10–25 420415 420542 220854 or 2209532 220842 220857
* without torch disable switch
Torch consumable partsNozzles and electrodes are available in various quantities. Contact your distributor for more information.
220930 220854 or 2209532 220842
1 Deflector for unshielded cutting2 Ohmic retaining cap
14 For more information visit our website: www.star-international.co.uk
Recommended Hypertherm genuine accessories
Face shieldClear face shield with flip-up shade for cutting and grinding. Safety shield included. ANSI Z87.1, CSA Z94.3, CE
00650026 Face shield shade 600650007 Face shield shade 8
Rolling tool bag00640134This rugged bag transports the Powermax45 XP with extra room for torches, consumables, accessories, and other gear. 50 cm x 44 cm x 32 cm
00650026 Face shield shade 600650007 Face shield shade 8
Air filtration kitA ready-to-install kit with a 1-micron filter and an auto drain moisture separator protects againstcontaminated air
00640129 Eliminiz
Leather torch sheathingAvailable in 77.6 m sections, this option provides additional protection for torch leadsagainst burn-through and abrasion.
00640130 Brown leather00640131 Black leather with Hypertherm logos
Circle cutting guidesQuick and easy set up for accurate circles up to 70 cm diameter. For optional use as a stand-off guide for straight and bevel cuts.
00640132 Basic kit - 38 cm arm, wheels and pivot pin00640133 Deluxe kit - 28 cm arm, wheels, pivot pin, anchor base and plastic case
System dust covers00640135Made from a flame-rettardantvinyl, a dust cover will protect your Powermax® system foryears.
00640135 Cover, Powermax45 and 45XP
Essential consumable kit00640136Essential kits provide an assortment of standard consumables in a convenient case for organizing and reordering.
00640136 Powermax45 XP kit
ISO 9001:2008Environmental stewardship is a core value of Star International. Powermaxproducts are engineered to meet and exceed global environmental regulations including the RoHS directive. ISO 9001:2008
For more information visit our website: www.star-international.co.uk 15
5 Oxy-Acetylene Integra® Cylinders - our safest yet!
Main Features
• Built-in, fully adjustable, regulator• Active content gauge• Outlet pressure gauge• Quick connector with integrated flashback arrestor• Safety cut-off in outlet quick connect• Ergonomic valve guard• Easier and safer to handle 30 litre cylinders
Active Content Gauge
• Always shows cylinder content -even when not in use• Eliminates the risk of selecting cylinder with insufficient content for job
Quick Connector/FBA
• Combined quick connect and flashback arrestor (FBA)• Unique design male/female connection• Oxygen and acetylene connector/FBA cannot be interchanged• Improved design to reduce risk of accidental disconnection
Quick Connector
Ensures safest use every time the cylinder is used (optimum level 2 safety). Snap-on connection to cylinder - no spanner needed. Additional safety lock-ing and release device prevents accidental removal.
Built in safety devices:
• Safety locking and release mechanism • Flame arrestor• Non-return valve• Thermal cut-off valve• Dust filter
The INTEGRA cylinder has been awarded the TUV Safety Test Mark• Additional safety • Easy to use • Time saving tested • User tested
Quick Connectors00640137 Oxygen FBA00640138 Acetylene FBA
Active ContentGauge
Quick Connector/FBA
Contents gaugeAlways shows how much gas is left,even when cylinder is not in use
Built-in regulatorCalibrated and maintained by gas manufacturer, regulates outlet pressureto 4 bar.Incorporates residual pressure valve to prevent contamination of cylindercontents.
Valve guardWith integrated handle, prevents accidental damageto built-in regulator.
Quick-connect gas outletAllows direct connection to your welding machine.
Gas economisersFlow rates to suit your application.Connect direct to your welding hose and snap on to quick-connect gas outlet
16 For more information visit our website: www.star-international.co.uk
Independently safety-tested guard design
Exceeds requirements of EN962. Protects all critical components and provides full access to valve operation. Safer, easier handling with the rotating, rolling knob
Variable pressure control (0-8 bar)
Suitable for all cutting, welding andbrazing applications
Contents gauge
Always shows how much gasis left, even when cylinder is not in use
Safety gas cut-off
Safety device in valve outlet ensures no gas flow if the quick connector is not fitted to the valve
Marine Oxygen Cylinder Star Oxygen Intergra Cylinder
40 ltr / 150 bar 30 ltr / 300 bar
Gas Capacity: 6.4m3 Gas Capacity: 9.25m3
Weight: 52 kg empty / 60 kg full Weight: 49.25kg empty / 61.70 full
Marine Acetylene Cylinder Star Acetylene Cylinder
40 ltr 30 ltr
Gas Capacity: 5.6m3 Gas Capacity: 5.4m3
Weight: 67kg Tare weight / 73 kg Gross Weight: 50kg empty / 56 kg full
Marine Argon Cylinder Star Argon Integra Cylinder
50 ltr / 200 bar 30 ltr / 300 bar
Gas Capacity 11.0m3 Gas Capacity 8.90m3
Weight 81 kg empty / 99 kg full Weight: empty 49.25 kg / 64.28 kg full
Star/Marine Gas Cylinder Comparison
For more information visit our website: www.star-international.co.uk 17
Some of the popular products and services we offer
• Welding Gases
• Plasma Cutters
• Gas Welding Equipment
• Arc Welding Equipment
• Marine Chemicals
• Water Treatment Test Kits
• Fuel Oil Test Kits
• Reagents
• Biological Products
• Disposable Span Gases
• Medical Equipment
• Fire Fighting Equipment (Service)
• Lifejacket, Immersion Suits (Supply & Service)
• Liferaft (Service, Exchange & Supply)
• Multi Gas Detectors (Supply & Service)
• Refrigeration Services / Spares Supplied
• RS-Series Refrigerant Gases
• Rescue Boats and Lifeboats (Supply & Service)
• Marine Safety Equipment (Supply & Service)
• Star EndoSan (Next Generation Disinfectant)
• Den-Sin Ultra High Pressure Washers
Star InternationalStar House, Turbine Business Park, Turbine Road, Birkenhead, Merseyside CH41 9BA United Kingdom
Tel: +44 (0) 1244 504500 (10 lines) Fax: +44 (0) 1244 504509Email: enquiries@star-international.co.ukwww.star-international.co.uk
Please send all your enquiries to the above UK Head Office
Southampton Depot:Star International, Unit 4 Westwood Court, Calmore Industrial Estate, Totton, Southampton SO40 3WXUnited Kingdom
REFR
IG
ERANT SOLUTIONS
LTDRS SERIESZERO ODPDROP-IN
REFRIGERANT
Worldwide Marine and Offshore Services
top related