fuji ele ctric cata log
Post on 18-Dec-2021
7 Views
Preview:
TRANSCRIPT
F U J I E L E C T R I C
C ATA LO G
RING COMPRESSORS & VACUUM PUMPS
[For Korea]
1
적용모델 모델 적용모델 모델이상
배관 연결취부
※ 연결 취부 방법은 상이하게 다를수 있습니다.
2
FUJI 링 블로워 모델 번호 지정
삼상 220/380V 무 일본 내수용
Specifications 삼상 200/200,220V
삼상 200/200,220V 삼상 200/200,220V
단상 100/100,110V 단상 100/100,110V
4Z : 380,400,415/400,440V※ N - 저소음 F - 후렌지
구성 관리 번호
Blower Size, Reference
Fuji Prefix
50/60 Hz Squirrel-Cage TEFC MotorHousing
Double ShieldedBearing
Shaft Seal
Direct Motor-Impeller Drive
Dynamically Balanced Impeller
RemovableThreaded Flanges
Built-in Thermal Protector
Terminal Box
Built-in Silencer
1T = 115V; 50/60 Hz; 1 Ph.2T = 230V; 50/60 Hz; 1 Ph. 200-230V; 50/60 Hz; 3 Ph.5T = 115V/230V;50/60 Hz;1Ph.4W= 460V; 50/60 Hz; 3 Ph.7W= 200-230/460V; 50/60 Hz; 3 Ph.5W= 575V; 60 Hz; 3 Ph.
○
※ 기타 더 다양한 모델이 있습니다.
※ 카탈로그 및 제품 명판 참조
특징
소형. 경량 저소음베어링 방진 구조높은 바람 압력
3
링블로워
VCS 다단터보블로워
VCP 터보블로워
VCT 터보블로워
배기팬 흡기팬 프로펠러팬
풍
압
풍량
사용 목적에 맞는 제품을 선정하여 주시기 바랍니다.
풍
압
팬 송풍기, 블로워 제품 맵
4
Ring blowerApplication examplesTransport equipment
For gripping (negative pressure) For discharge (positive pressure)
Hopper loader Transport of granular solids Sludge recovery equipment Card feed (1)
Recommended type 40-90 type 40-60 typeRecommended type ーRecommended type 08-30 typeRecommended type
Transport of material (e.g. PVC, polyethylene, plastic resin).
Transport of raw materials (e.g. rice, wheat, soybeans, powder, bean curd refuse, almonds, senbei cracker materials).
Recovery of sludge with shield method. Card gripping feed.
Card feed (2) Air lift (1) Air lift (2) Transport of mixtures of water and granular material
Recommended type 30・40 type 08-60 typeRecommended type 40-60 typeRecommended type 40-90 typeRecommended type
Cards gripped by suction through holes in belt during transport.
Cardboard box
Gripping of items by suction for transport.
The large air flow allows stable gripping of large items.
Recovery of small fish etc.
Transport of granular solids Transport of cereals Golf ball feed Mixing in hopper
30-50 typeRecommended type 40-60 typeRecommended type
Air conveyance of pellet-type raw materials (e.g. PVC and polyethylene pellets).
Air conveyance of raw materials (e.g. wheat) dropped in discrete amounts using a rotary valve.
Feeding golf balls. Air forced into hopper to eliminate bridging with granular solids.
Tank
Raw materials
Sludge Submersible pump
Hopper
Suction disk
Card RollFilter
Card
PelletsRawmaterials
Rotaryvalve
Damper
Bypass hole
Golf ballGranularsolids
FilterDrain
Veneer sheet
Damper weight
Material
Secondary air
Recommended type 40-90 type Recommended type 40-70 type
Note: The above recommended types are all based on examples delivered by the manufacturer.
5
Food machineryFor gripping (negative pressure)
Automatic bottle filling machinery Sausage skin peeler Food processing equipment
For discharge (positive pressure)
Filling cardboard milk cartons
Recommended type 20-50 type 60 typeRecommended type 40-60 typeRecommended type 20 typeRecommended type
Drain chamberGenerates negative pressure during packing.
Grip by suction to ensure effective peeling, and collect peeled skins.
Vacuum impregnation for flavoring of ingredients.
Removal of bubbles by suction when filling milk cartons.
Automatic equipment for aligning senbei cracker materials Caramel candy packing equipment Dried laver seaweed peeling equipment In combination with press
Recommended type ー 40 typeRecommended type 40-60 typeRecommended type 40・50 typeRecommended type
Automatic alignment in senbei cracker baking equipment.
Caramel candy packing equipment. Suction for peeling dried laver seaweed from drainage slats.
Suction removal of liquid during squeezing.
Dried laver seaweed pick-and-place Ramen noodle manufacturing equipment Fruit peeling equipment Filling vegetable packs
Recommended type ー ーRecommended type 20・30 typeRecommended type ーRecommended type
Paper
Source of suction for gripping dried laver seaweed.
Conveyor
Suction and blowing of noodle raw materials.
Gripping and holding fruit.
Transport of granular solids Tofu manufacturing equipment Bottle washing equipment Bottling and assembly lines
40-60 typeRecommended type ーRecommended type
Transport of raw materials (e.g. rice, wheat, soybeans, powder, bean curd refuse, almonds, senbei cracker materials).
Recommended type 40-60 type Recommended type ー
Note: The above recommended types are all based on examples delivered by the manufacturer.
Soybeans transported by suction. Switched to blowing for cleaning.
Removal of water droplets in bottles after washing.
Blowing water droplets from bottles.
Conveyor
Filling vegetable packs.
Bottle
Senbeicrackers
Caramelcandy
Tank
Sausage
Milkcarton
Cutter
Filter
Box
Material
Soybeans
Noodles
CutterFruit
Pad
Vegetables
Pack
Dried laverseaweed
Filter
Bottle
Bottle
Bottle
Water droplets
Dried laver seaweed
Vacuum
Sausage skin Ingredients
Filter
Ring blowerApplication examples
6
Food machinery
Automatic tank washing equipment Pack drying
For gripping (negative pressure)
Ham processing equipment
For discharge (positive pressure)
Ramen noodle processing line
Recommended type ー Recommended type 40-60 type Recommended type 40-60 type ーRecommended type
Automatic washing inside tank with air mixing.
Conveyor
Drying packs with hot air. Blowing water droplets off hams. Removal of oil from ramen noodles using hot air.
Spaghetti processing equipment Vegetable washing equipment Fruit washing equipment
ーRecommended type
Preventing sticking of spaghetti. Aeration when washing vegetables. Removal of water droplets from washed fruit.
Tank
Roll
Heater
Heater
Noodles
NoodlesVegetables
Fruit
Outlet
Nozzle
Pack
Ham
Wash waterreservoir
Recommended type ー Recommended type 40・50 type
Note: The above recommended types are all based on examples delivered by the manufacturer.
Ring blowerApplication examples
7
Lint recovery (1) Lint recovery (2) Sock knitting machine Automatic loom
Recommended type 20-60 type 08-20 typeRecommended type 20-40 typeRecommended type Recommended type 20-40 type
Recovery of fabric off-cuts and lint produced during trimming.
Recovery of lint produced during industrial sewing machine operation.
Gripping of socks, and preventing sagging and non-uniform knitting.
Gripping thread before it reaches the weaving machinery, and removal of cotton and lint.
Twining Loom Automatic loom Circular knitting machine
20-40 typeRecommended type 20-40 typeRecommended type
Removal of soot produced in the process of twining
Woof air tensioning, and recovery of lint. Application of air tension to the woven product to facilitate weaving, and simultaneous waste collection.
Pipes arrayed in a circle around the part through which twining is passed to blow cotton waste away during knitting.
Recommended type 30・40 type Recommended type 30 type
Note: The above recommended types are all based on examples delivered by the manufacturer.
Textile equipmentFor gripping (negative pressure) For discharge (positive pressure)
FabricCutter Filter
Filter FilterSock
Filter box
Thread
Thread
EjectorThread
Sewingmachine
Lint
Lint
Pipe
Intake
Twining
Twining
Lint
Ring blowerApplication examples
8
Packaging equipmentFor gripping (negative pressure) For discharge (positive pressure)
Plastic film processing Label applicator equipment Automatic packaging equipment Hole puncher
Recommended type 20-60 type Recommended type 10-30 type Recommended type 30・40 type Recommended type 08-30 type
Gripping plastic film with suction roller. Labels held on roll, and applied to bottles etc.
Cut-offs
Removal of tape cut-offs.
Waste
Collection of waste from hole puncher in filter box.
Vertical packaging equipment Horizontal packaging equipment Automatic packaging equipment Cardboard packaging
Recommended type 20-40 type Recommended type 20-40 type 20-60 typeRecommended type 40-60 typeRecommended type
Bag
Opening and gripping bags.
Bag
Opening and gripping bags.
Waste collection box
Collection of waste (e.g. particles) from table of automatic packaging machine.
Preventing displacement of, and gripping, cardboard.
Vacuum forming equipment Dry cleaning packaging
Film formation. Opening and gripping dry cleaning bags.
Recommended type ー Recommended type 20-40 type
Note: The above recommended types are all based on examples delivered by the manufacturer.
FilmLabel Cutter
Tape
Filter
Filter
Paper
Belt
Roll
BottleLabel stripperSuction roller
Film
Bag Clothing
Cardboard
Powder
Roll
Ring blowerApplication examples
9
Machine toolsFor gripping (negative pressure) For discharge (positive pressure)
Hot air hose
Filter box
Swarf
Nozzle Nozzle
Grinding dust
Collecting bag
Cover Grinder
Mister
Moldedproduct
Work holder
Work
Work
Work
Press
Pump SludgeRoll
Cutter Cake
Shower
Pressureplate
Filter
Welding
Welder Gripping work Laminating press Dehydrator
Recommended type 40 type 80・90 typeRecommended type 40-60 typeRecommended type 80・90 typeRecommended type
Removal of smoke, heat and fumes during welding work.
Gripping non-magnetic materials such as timber and plastic.
Removal of excess air on surface of pressure plate before lamination.
Air-water separation column
Vacuum dehydration of sludge.
Swarf removal Press Grinder Cutting oil mister
20-50 typeRecommended type 30-50 typeRecommended type
Collection of swarf produced during machining operations.
Removal of molded products from mold. Suction to collect grinding dust. Source of pressure to generate cutting oil mist.
Recommended type 30-60 type Recommended type 40-60 type
Note: The above recommended types are all based on examples delivered by the manufacturer.
Ring blowerApplication examples
10
Plant and machineryFor gripping (negative pressure) For discharge (positive pressure)
Tunnel
Filter
Drying furnace
Product
Product
Piping
ExhaustAir brush
Air
Fuel
Dust andiron filings
Conveyor Filter Clay Brush Nozzle
Damper
Work
Plating tank
Mist detergent Spray wand
Sediment
Detergent
Liquid
Dust
Priming water pipe
Vacuum dehydration
Water pipe
Construction site Water uptake pump Automobile exhaust gas detection equipment
Recommended type ー Recommended type ー Recommended type ー 60-80 typeRecommended type
Localized removal of dust and toxic gases from construction sites in restricted spaces such as tunnels.
Priming water for water pump. Testing of automobile exhaust gas. Vacuum dehydration of silica sand.
Filter Extraction of plating gases Car washing equipment Cleaning tank
Recommended type 50 type Recommended type ー 50-90 typeRecommended type
Reduce filtering time. Extraction of plating gases. Produces a mist of water and detergent. Mixing of sediment, and aeration of comparatively shallow water treatment plants.
Recommended type 40-60 type
Freezing prevention Drying line Mold cleaning equipment Sand blasting
Recommended type 40-60 type Recommended type ー 40-60 typeRecommended type 60-90 typeRecommended type
Water pipe
Prevention of freezing in water piping. Small-scale drying lines. Blows clay removed from surfaces of the tile mold by rotation of the brushes.
Painting line Cleaning piping Gas burner
50・60 typeRecommended type
Paint
Blowing to prevent paint drips on finished surfaces.
Recommended type ー Recommended type 40-60 type
Note: The above recommended types are all based on examples delivered by the manufacturer.
Removal of dust and iron filings produced during replacement and periodic inspection of piping.
Atomization of fuel.
Air brush
60-80 typeRecommended type
Pressure gauge
High-pressure air free of oil is highly desirable for air-brushing.
Air source for blasting.
Ring blowerApplication examples
11
Plant and machineryFor gripping (negative pressure) For discharge (positive pressure)
Mist
Nozzle
Spray Plating tank Plating tank Plating line
20・30 typeRecommended type 50・60 typeRecommended type
Source of high-pressure air free of oil for spraying.
Air blown into the tank to remove bubbles from electrolyte and thus improve plating quality.
Maintains temperature of plating fluid, and prevents separation of cutting fluid.
Blows away water droplets following plating, reducing energy consumption during drying.
Recommended type 40-60 type Recommended type 30-50 type
Note: The above recommended types are all based on examples delivered by the manufacturer.
Ring blowerApplication examples
12
Forestry and fishing machineryFor gripping (negative pressure) For discharge (positive pressure)
EggPack
Vegetables
Raw materials
Milk hose Milk
Film
Conveyor
Pallet
Wheat
Sawdust and rice husks
Animal waste
Filter
Finishedproduct
Gripper pad
Conveyor
Egg packing Vegetable packaging Transport of granular solids Milking machinery
Recommended type 20-40 type 20 typeRecommended type 40-60 typeRecommended type 30・40 typeRecommended type
Gripping and placing eggs in packs. Forming and cutting of vegetable packaging film.
Transport of raw materials (e.g. rice, wheat, soybeans, powder, bean curd refuse, almonds, senbei cracker materials).
Dairy milking.
Gripping and transport for rice bagging Transport of mixtures of water and granular material Fruit peeling equipment Filling vegetable packs
Recommended type 60 type 40-90 typeRecommended type 20・30 typeRecommended type ーRecommended type
Gripping and transport for rice bagging and stacking.
Recovery of small fish etc. Gripping and holding fruit.
Conveyor
Gripping and packing vegetables.
Transport of cereals Fermentation of animal waste Fruit washing equipment Egg washing equipment
Recommended type 40-70 type ーRecommended type ーRecommended type 80 typeRecommended type
Air conveyance of wheat dropped in discrete amounts using a rotary valve.
Promotion of animal waste fermentation. Removal of water droplets from washed fruit.
Vegetable washing equipment Supplementary oxygen for fish breeding ponds
Aeration when washing vegetables.
Recommended type 40・50 type Recommended type 30-60 type
Note: The above recommended types are all based on examples delivered by the manufacturer.
Pond
Supplementary dissolved oxygen for fish breeding ponds.
Brush conveyor
Automatic egg washing.
Drain Cutter
Fruit
Pad
Vegetables
Pack
Rotaryvalve
Fruit
Egg
Blow nozzle
Vegetables
Ring blowerApplication examples
13
Medical and welfare equipmentFor gripping (negative pressure)
FilTooth debris and salivater Filter
Sunshade
Mist
Bath
Leg Air mat
Mat
Dental equipment Therapeutic baths Respiration equipment
For discharge (positive pressure)
Massage equipment
20-60 typeRecommended type 08-20 typeRecommended type 30・40 typeRecommended type
Removal of tooth debris and saliva produced during dental work.
Aeration in bath. Prevention of irregular respiration, and assisting respiration.
Vibration of air mat promotes circulatory function within the skin.
Recommended type 30・40 type
Humidifier (mist generated within enclosure) Air bed
Humidification of pediatric bed by misting within curtained enclosure.
Air mat
Body support and protection for burn victims and bedridden patients.
Recommended type 30-60 type Recommended type 20-40 type
Note: The above recommended types are all based on examples delivered by the manufacturer.
Ring blowerApplication examples
14
OtherFor discharge (positive pressure)
Vacuum tankFabric
Leak tester Vacuum filter
For gripping (negative pressure)
Chemical testing equipment Stain remover
Recommended type ー Recommended type ー ーRecommended type 08-30 typeRecommended type
Seal testing. Rapid filtering by vacuum. Vacuum tank for chemical testing equipment.
Removal of moisture in fabric.
Clothing press Exhaust gas detection equipment Clean room Flame cutter
Recommended type ー ーRecommended type 40-60 typeRecommended type ーRecommended type
Removal of steam by suction. Employed in automobile exhaust gas testing equipment.
Localized ventilation in clean rooms. Gripping and holding cutters for glass and plastic materials.
Gas decomposition equipment
Tank
Suction source for gas spectrometer.
Recommended type ー
Note: The above recommended types are all based on examples delivered by the manufacturer.
Fabric
Cylinder
Gas
Filter
Air
Cutter
Vacuum pipe
RailMotor
Filter
Ring blowerApplication examples
15
16
최대압력 최대량 적정압력 적정량
kPa m3/min kPa m
3/min
VFC088AF-S 0.06/0.08 0.38-0.22/0.4-0.23 3.73/4.85 0.47/0.56 1.96 0.25/0.35 E 53.0/555 PS1 5.5 -
VFC108AF-S 0.09/0.12 0.47-0.28/0.58-0.33 5.15/6.37 0.58/0.69 2.94 0.35/0.50 E 525/565 PS1 7 2.8-1.6/2.5-1.5
VFC208AF-S 0.17/0.28 1.3-0.75/1.3-0.74 6.67/9.02 0.90/1.09 2.94 0.64/0.84 E 575/62.0 PS1 8.5 6.8-4.0/6.1-3.6
VFC308AF-S 0.28/0.42 1.7-0.95/1.7-1.0 9.32/12.4 1.28/1.40 3.92 0.9/1.1 E 58.0/62.0 PS1 ¼ 10.5 9.64-5.57/8.55-4.94
VFC408AF-S 0.55/0.85 2.9-1.7/3.4-2.0 10.4/14.1 2.0/2.5 4.90 1.45/1.95 B 655/695 PS1 ½ 19.5 21.8-12.6/19.7-11.5
VFC508AF-S 1.3/1.9 5-2.9/6.7-39 14.7/19.6 3.4/4 6.86 2.4/3.0 B 705/745 PS1 ½ 32 41.8-24.9/37.9-22.5
VFC608AF-S 2.3/34 9-5.2/11 .S6.8 21.1/275 4.2/55 9.81 3.2/44 B 70.0/745 PS2 50 94.3-54.1/77.6-45.6
VFC708AF-S 3.3/5.0 13.5-7.9/19-11 21.6/28.4 6.2/72 9.81 4.4/57 F 75.0/795 NPSC2 85 120-69/106-61
VFC808AF-S 5.5/75 18-10.5/25-14.5 25.5/33.3 8.7/10.3 9.81 6.3/85 B 78.0/81.0 NPSC2 ½ 133 170.2-102.4/170.1-101.8
VFC908AF-S 11/15 27.5-16/41-23.5 25.5/31.4 13/15.5 14.7 7.5/10.8 B 795/83.0 PS3 200 352-205/308-180
VFC088A-S 0.06/0.08 0.38-0.22/0.4-0.23 3.73/4.85 0.47/0.56 1.96 0.25/0.35 E 53.0/555 Φ32 5.5 -
VFC108A-S 0.09/0.12 0.47-0.28/0.58-0.33 5.15/6.37 0.58/0.69 2.94 0.35/0.50 E 525/565 PS1 7 2.8-1.6/2.5-1.5
VFC208A-S 0.17/0.28 1.3-0.75/1.3-0.74 6.67/9.02 0.90/1.09 2.94 0.64/0.84 E 575/62.0 PS1 8.5 6.8-4.0/6.1-3.6
VFC308A-S 0.28/0.42 1.7-0.95/1.7-1.0 9.32/12.4 1.28/1.40 3.92 0.9/1.1 E 58.0/62.0 PS1 ¼ 10.5 9.64-5.57/8.55-4.94
VFC408A-S 0.55/0.85 2.9-1.7/3.4-2.0 10.4/14.1 2.0/2.5 4.90 1.45/1.95 B 655/695 PS1 ½ 19.5 21.8-12.6/19.7-11.5
VFC508A-S 1.3/1.9 5-2.9/6.7-39 14.7/19.6 3.4/4 6.86 2.4/3.0 B 705/745 PS1 ½ 32 41.8-.24.9/37.9-22.5
VFC608A-S 2.3/34 9-5.2/11.56.8 21.1/275 4.2/55 9.81 3.2/44 B 70.0/745 PS2 50 94.3-54.1/77.6-45.6
VFC708A-S 3.3/5.0 13.5-7.9/19-11 21.6/28.4 6.2/72 9.81 4.4/57 F 75.0/795 NPSC2 85 120-69/106-61
VFC808A-S 5.5/75 18-10.5/25-14.5 25.5/33.3 8.7/10.3 9.81 6.3/85 B 78.0/81.0 NPSC2 ½ 133 170.2-102.4/170.1-101.8
VFC908A-S 11/15 27.5-16/41-23.5 25.5/31.4 13/15.5 14.7 7.5/10.8 B 795/83.0 PS3 200 352-205/308-180
VFC088AN-S 0.06/0.08 0.38-0.22/0.4-0.23 3.73/4.85 0.47/0.56 1.96 0.25/0.35 E 53.0/555 Φ32 5.5 -
VFC108AN-S 0.09/0.12 0.47-0.28/0.58-0.33 5.15/6.37 0.58/0.69 2.94 0.35/0.50 E 525/565 PS1 7 2.8-1.6/2.5-1.5
VFC208AN-S 0.17/0.28 1.3-0.75/1.3-0.74 6.67/9.02 0.90/1.09 2.94 0.64/0.84 E 575/62.0 PS1 8.5 6.8-4.0/6.1-3.6
VFC308AN-S 0.28/0.42 1.7-0.95/1.7-1.0 9.32/12.4 1.28/1.40 3.92 0.9/1.1 E 58.0/62.0 PS1 ¼ 10.5 9.64-5.57/8.55-4.94
VFC408AN-S 0.55/0.85 2.9-1.7/3.4-2.0 10.4/14.1 2.0/2.5 4.90 1.45/1.95 B 655/695 PS1 ½ 19.5 21.8-12.6/19.7-11.5
VFC508AN-S 1.3/1.9 5-2.9/6.7-39 14.7/19.6 3.4/4 6.86 2.4/3.0 B 705/745 PS1 ½ 32 41.8-24.9/37.9-225
VFC608AN-S 2.3/34 9-5.2/11.5-6.8 21.1/275 4.2/55 9.81 3.2/44 B 70.0/745 PS2 50 94.3-54.1/77.6-45.6
*VFC708AN-S 3.3/5.0 13.5-7.9/19-11 21.6/28.4 6.2/72 9.81 4.4/57 F 75.0/795 NPSC2 85 120-69/106-61
*VFC808AN-S 5.5/75 18-10.5/25-14.5 25.5/33.3 8.7/10.3 9.81 6.3/85 B 78.0/81.0 NPSC2 ½ 133 170.2-102.4/170.1 -101.8
*VFC908AN-S 11/15 27.5-16/41-23.5 25.5/31.4 13/15.5 14.7 7.5/10.8 B 795/83.0 PS3 200 352-205/308-180
VFC088PF-S 0.06/0.08 1.0-0.5/1.4-0.7 3.73/4.85 0.47/0.56 1.96 0.25/0.35 E 53.0/555 PS1 5.5 3.4-1.6/4.0-1.9
VFC108PF-S 0.09/0.12 1.3-0.65/1.6-0.8 5.10/6.86 0.58/0.69 2.94 0.35/0.50 E 525/565 PS1 7.5 8-3.8/9.5-4.6
VFC208PF-S 0.17/0.28 3.0-1.5/3.8-1.9 6.67/8.63 0.86/1.05 2.94 0.64/0.84 E 575/62.0 PS1 9.0 8.2-3.9/9.8-4.6
VFC308PF-S 0.25/0.38 3.8-1.9/5.22.6 9.61/12.0 1.25/1.45 3.92 0.9/1.1 E 58.0/62.0 PS1 ¼ 11.5 11.2-5.9/13.4-7.0
VFC408PF-S 0.5/0.75 6.0-3.0/9.04.5 9.81/132 2.05/2.45 4.90 1.45/1.95 B 655/695 PS1 ½ 21.5 19-9.6/22.5-11.5
VFC508PF-S 1.3/1.9 14-10.5/17-12.7 14.7/19.6 3.4/4.0 6.86 2.4/3.0 B 705/745 PS1 ½ 44 -
FUJI VFC Blowers
토출
구경
중량
kg
기동전류
A전류 A
절연
등급
소음도
db(A)
출력
Kw
110
/
220
50
/
60
50
/
60
220
/
380
50
/
60
220
/
380
220
/
380
50
/
60
형식
Model
전원
V
주파수
Hz
17
최대압력 최대량 적정압력 적정량
kPa m3/min kPa m
3/min
VFC088AF 0.06/0.08 0.37/0.42-0.40 3.73/4.85 0.47/0.56 1.96 0.25/0.35 E 53.0/55.5 PS1 5.5 2/2-2.2
VFC108AF 0.09/0.12 0.51/0.62-0.60 5.15/6.37 0.58/0.69 2.94 0.35/0.50 E 52.5/56.5 PS1 7.5 4.2/3.9-4.2
VFC208AF 0.17/0.28 1.4/1.4-1.4 6.67/9.02 0.90/1.09 2.94 0.64/0.84 E 57.5/62.0 PS1 9.0 9/8.1-9
VFC308AF 0.28/0.42 1.8/1.9-1.8 9.32/12.4 1.28/1.40 3.92 0.9/1.1 E 58.0/62.0 PS1 ¼ 11 13/12-13.5
VFC408AF 0.55/0.85 3.1/3.7-3.6 10.4/14.1 2.0/2.5 4.90 1.45/1.95 B 65.5/69.5 PS1 ½ 19.5 27/25-27.5
VFC508AF 1.3/1.9 5.4/7.4-6.8 14.7/19.6 3.4/4.0 6.86 2.4/3.0 B 70.5/74.5 PS1 ½ 28.0 55/52-57
VFC608AF 2.3/34 10/13-12 21.1/27.5 42/5.5 9.81 32/4.4 B 70.0/74.5 PS2 44.0 98/89-98
VFC088A 0.06/0.08 0.37/0.42-0.40 3.73/4.85 0.47/0.56 1.96 0.25/0.35 E 53.0/55.5 32 5.5 2/2-2.2
VFC108A 0.09/0.12 0.51/0.62-0.60 5.15/6.37 0.58/0.69 2.94 0.35/0.50 E 52.5/56.5 32 7.0 4.2/3.9-4.2
VFC208A 0.17/0.28 1.4/1.4-1.4 6.67/9.02 0.90/1.09 2.94 0.64/0.84 E 57.5/62.0 32 8.5 9/8.1-9
VFC308A 0.28/0.42 1.8/1.9-1.8 9.32/12.4 1.28/1.40 3.92 0.9/1.1 E 58.0/62.0 38 10.5 13/12-13.5
VFC408A 0.55/0.85 3.1/3.7-3.6 10.4/14.1 2.0/2.5 4.90 1.45/1.95 B 65.5/69.5 50.PT1 ½ 19 27/25-27.5
VFC508A 1.3/1.9 5.4/7.4-68 14.7/19.6 3.4/4.0 6.86 2.4/3.0 B 70.5/74.5 50.PT1 ½ 31.5 55/52-57
VFC608A 2.3/34 10/13-12 21.1/27.5 42/5.5 9.81 32/4.4 B 70.0/74.5 63.PT2 49 98/89-98
*VFC708A(s) 3.3/5.0 15/21-19 21.6/28.4 6.2/7.2 9.81 4.4/5.7 F 75.0/79.5 PS2 84 145/128-141
*VFC808A(s) 5.5/7.5 20/28-26 25.5/33.3 8.7/10.3 9.81 6.3/8.5 B 78.0/81.0 PS2 ½ 132 227/193-212
*VFC908A(s) 11/15 30/45-41 25.5/31.4 13/15.5 14.7 7.5/10.8 B 79.5/83.0 PS3 200 406/351-387
VFC088A-4Z 0.06/0.08 0.2-0.2-0.21/0.22-0.21 3.73/4.85 0.47/0.56 1.96 0.25/0.35 E 53.0/55.5 32 5.5 1-1.1-1.1/1-1.1
VFC108A-4Z 0.09/0.12 0.27-0.260.26/0.31 -0.3 5.15/6.37 0.58/0.69 2.94 0.35/0.50 E 52.5/56.5 32 7.0 2-2.1-2.1/1.9-2.1
VFC208A-4Z 0.17/0.28 0.60.630.66/0.7-0.68 6.67/9.02 0.90/1.09 2.94 0.64/0.84 E 57.5/62.0 32 8.5 3.6-3.9-4/3.4-3.7
VFC308A-4Z 0.28/0.42 0.860.90.95/0.950.9 9.32/12.4 1.28/1.40 3.92 0.91/1.1 E 58.0/62.0 38 10.5 5.9-6.5-6.7/6.1-6.7
VFC408A-4Z 0.55/0.85 1.7-1.6-1.5/1.9-1.8 10.4/14.1 2.0/2.5 4.90 1.45/1.95 B 65.5/69.5 50.PT1 ½ 19.5 13-13.5-14/12.5-14
VFC508A-4Z 1.3/1.9 2.9-2.7-2.6/37-3.4 14.7/19.6 3.4/4.0 6.86 2.4/3.0 E 70.5/74.5 50.PT1 ½ 31.5 26.5-27.5-28.5/26-28.5
VFC608A-4Z 2.3/3.4 5.3-5.0-4.9/6.5-6 21.1/27.5 4.2/5.5 9.81 3.2/4.4 E 70.0/74.5 63.PT2 49 46-49-51/44-49
*VFC708A-4Z 3.3/5.0 7.9-7.5-7.3/10.5-9.5 21.6/28.4 6.2/7.2 9.81 4.4/5.7 F 75.0/79.5 PS2 84 69-73-75/64-71
*VFC808A-4Z 5.5/75 10.6-10-9.7/14-13 25.5/33.3 8.7/10.3 9.81 63/8.5 B 78.0/81.0 PS2 ½ 132 108-113-118/96-106
VFC088AN 0.06/0.08 0.37/0.42-0.40 3.73/4.85 0.47/0.56 1.96 0.25/0.35 E 50.5/53.0 32 7.5 2/2-2.2
VFC108AN 0.09/0.12 0.51/0.62-0.60 5.15/6.37 0.58/0.69 2.94 0.35/0.50 E 49.5/51.5 32 8.5 4.2/3.9-4.2
VFC208AN 0.17/0.28 1.4/1.4-1.4 6.67/9.02 0.90/1.09 2.94 0.64/0.84 E 55.5/59.0 32 12.0 9/8.1-9
VFC308AN 0.28/0.42 1.8/1.9-1.8 9.32/12.4 1.28/1.40 3.92 0.9/1.1 E 55.5/59.5 38 12.0 13/12-13.5
VFC408AN 0.55/0.85 3.1/3.7-3.6 10.4/14.1 2.0/2.5 4.90 1.45/1.95 B 62.0/66.0 50.PT1 ½ 22.0 27/25-27.5
VFC508AN 1.3/1.9 5.4/7.4-68 14.7/19.6 3.4/4.0 6.86 2.4/3.0 B 66.0/69.5 50.PT1 ½ 3.6 55/52-57
VFC608AN 2.3/34 10/13-12 21.1/27.5 42/5.5 9.81 32/4.4 B 67.5/70.5 63.PT2 53 98/89-98
*VFC708AN 3.3/5.0 15/21-19 21.6/28.4 6.2/7.2 9.81 4.4/5.7 F 70.5/74.5 PS2 100 145/128-141
*VFC808AN S.5/7.5 20/28-26 25.5/33.3 8.7/10.3 9.81 6.3/8.5 B 74.0/75.0 PS2 ½ 144 227/193-212
*VFC908AN 11/15 30/45-41 25.5/31.4 13/15.5 14.7 7.5/10.8 B 76.0/79.5 PS3 219 406/351-387
VFC068P 100 0.023/0.035 0.46/0.6 1.62/2.26 0.42/0.48 0.981 0.20/0.30 E 52.5/56.0 32 2.5 2/1.4
VFC088P 0.06/0.08 1.3/1.4-1.3 3.73/4.85 0.47/0.56 1.96 0.25/0.35 E 53.0/55.5 32 5.5 4/3.8-4.2
VFC108P 0.09/0.12 1.5/2.0-1.9 5.10/6.86 0.58/0.69 2.94 0.35/0.50 E 52.5/56.5 32 7.5 9.4/9.2-10
VFC208P 0.17/0.28 4.5/4.4-4.2 6.67/8.63 0.86/1.05 2.94 0.64/0.84 E 57.5/62.0 32 9.0 14.5/13-14.5
VFC308P 0.25/0.38 5.0/5.8-5.6 9.61/12.0 1.25/1.45 3.92 0.9/1.1 E 58.0/62.0 38 11.5 18.5/17.5-19.5
VFC408P 0.50/0.75 7.0/11.0-10.0 9.81/13.2 2.05/2.45 4.90 1.45/1.95 B 65.5/69.5 50.PT1 ½ 21.5 37/33-37
VFC508P 200/200 220
1.3/1.9 8.0/12-11 14.7/19.6 3.4/4.0 6.86 2.4/3.0 B 70.5/74.5 50.PT1 ½ 44 81/72-79
VFC088PN 0.06/0.08 1.3/1.4-1.3 3.73/4.85 0.47/0.56 1.96 0.25/0.35 E 49.0/52.5 32 7.5 4/3.8-4.2
VFC108PN 0.09/0.12 1.5/2.0-1.9 5.10/6.86 0.58/0.69 2.94 0.35/0.50 E 48.5/51.5 32 8.5 9.4/9.2-10
VFC208PN 0.17/0.28 4.5/4.4-42 6.67/8.63 0.86/1.05 2.94 0.64/0.84 E 55.0/59.5 32 12.0 14.5/13-14.5
VFC308PN 0.25/0.38 5.0/5.8-5.6 9.61/12.0 1.25/1.45 3.92 0.9/1.1 E 55.5/59.5 38 12.0 18.5/17.5-19.5
VFC408PN 0.5/0.75 7.0/11.0-10.0 9.81/13.2 2.05/2.45 4.90 1.45/1.95 B 62.5/66.5 50.PT1 ½ 22.0 37/33-37
FUJI VFC Blowers
토출구경중량
kg
기동전류
AMS
소음도
db(A)
200
/
200
220
50
/
60
전류 A
50
/
60
100
/
100
110
200
/
200
220
50
/
60
380
400
415
/
400
440
50
/
60
200
/
200
220
50
/
60
100
/
100
110
50
/
60
형식
Model
전원
V
주파수
Hz
출력
Kw
18
동력
풍압
풍압
토출흡입
토출 흡입
동력 동력
풍량 풍량
토출 흡입 적정범위 bypass
동력
토출 흡입 적정범위 bypass
동력
풍량 풍량
토출 흡입
동력 동력
풍량 풍량
풍량 풍량
토출 흡입
토출 흡입
동력 동력
토출 흡입
동력
동력
동력
동력
동력
동력
동력
풍압
풍압
풍압
풍압
풍압
풍압
19
토출 흡입 동
력
풍량
동력
토출 흡입 적정범위 bypass
동력
풍량
토출흡입 적정범위bypass
동력
풍량 풍량
토출흡입 적정범위bypass
동력
동력
동력
토출흡입 적정범위bypass
동력
풍량 풍량
동력 동력
토출흡입 적정범위bypass
동력
동력
토출흡입 적정범위bypass
동력
풍량 풍량
토출흡입 적정범위bypass
동력
동력
동
력
풍압
풍압
풍압
풍압
풍압
풍압
20
풍량 풍량
동력
토출흡입 적정범위bypass
동력
동력
토출흡입 적정범위bypass
동력
동력
풍량 풍량
토출흡입 적정범위bypass
동력
토출흡입 적정범위bypass
동력
동력
풍압
풍압
풍압
풍압
토출흡입
동력
풍량 풍량
토출흡입
동력
토출흡입 적정범위bypass
토출흡입 적정범위bypass
동력
동력
풍량 풍량
토출흡입
동력 동력
풍량 풍량
토출흡입
동력
토출흡입
동력
풍량 풍량
토출흡입
동력
동력
동력
동력
동력
동력
동력
동력
풍압
풍압
풍압
풍압
풍압
풍압
풍압
풍압
21
22
동력
토출흡입
동력
토출흡입 적정범위bypass
동력 동력
풍량 풍량
동력
토출흡입 적정범위bypass
동력
토출흡입적정범위bypass
동력
동력
풍량 풍량
풍량 풍량
토출흡입적정범위bypass
토출흡입적정범위bypass
동력 동력
동력
동력
풍압
풍압
풍압
풍압
풍압
풍압
동력
토출흡입 적정범위bypass
동력
풍량 풍량
토출흡입 적정범위bypass
동력
동력
풍압
풍압
23
풍량 풍량
동력
토출흡입 적정범위bypass
동력
동력
토출흡입 적정범위bypass
동력
동력
풍량 풍량
토출흡입 적정범위bypass
동력
토출흡입 적정범위bypass
동력
동력
풍압
풍압
풍압
풍압
24
토출흡입
동력
풍량 풍량
토출흡입
동력
동력
풍압
토출흡입
적정범위bypass
풍량 풍량
토출흡입
토출흡입
토출흡입
동력
동력
동력 동력
동력
풍압
풍량 풍량
토출흡입
토출흡입
동력
동력
풍량 풍량
동력
풍압
동력
풍압
적정범위bypass 풍
압
동력
동
력
풍압
동력
동력
풍압
풍압
25
토출흡입
동력
동력
풍압
풍량 풍량
토출흡입
적정범위bypass
동력
풍압
동력
토출흡입
적정범위bypass
동력
동력
풍압
동력
토출흡입
적정범위bypass
동력
풍압
풍량 풍량
토출흡입
적정범위bypass
동력
동력
풍압
풍량 풍량
토출흡입
적정범위bypass
동력
토출흡입
적정범위bypass
동력
풍량 풍량
토출흡입
적정범위bypass
동력
동력
풍압
동력
풍압
동력
풍압
26
토출흡입
적정범위bypass
동력 동력
동력
풍압
풍량 풍량
동력
풍압
토출흡입
적정범위bypass
동력
풍압
토출흡입
적정범위bypass
동력 동력
풍량 풍량
토출흡입
적정범위bypass
동력
풍압
27
토출 흡입
동력
풍량 풍량
토출 흡입
동력
토출 흡입
적정범위bypass
토출 흡입
적정범위bypass
동력
동력
풍량 풍량
토출 흡입
적정범위bypass
토출 흡입
적정범위bypass
동력 동력
풍량 풍량
풍압
풍압
토출 흡입
적정범위bypass
토출 흡입
적정범위bypass
동력
동력
풍량 풍량
풍압
풍압
동력
동력
동력
동력
동력
동력
동력
동력
동력
풍압
풍압
풍압
풍압
28
풍압
동력
토출흡입
동력 동력
풍량 풍량
풍량 풍량
풍압
동력
토출흡입
적정범위bypass
토출흡입
적정범위bypass
동력
동력
풍압
토출흡입
적정범위bypass
동력 동
력
풍압
29
토출흡입
동력
동력
풍압
풍량
토출흡입
동력
동력
풍압
풍량
토출흡입
적정범위
동력
풍압
동력
풍압
동력
풍량 풍량
토출흡입
적정범위
동력
동력
풍압
토출흡입
적정범위
동력
토출흡입
적정범위
동력
동력
풍압
풍량 풍량
토출흡입
적정범위
동력
풍압
동력
풍량 풍량
동력
동력
풍압
토출흡입
적정범위
bypass bypass
bypass bypass
bypass bypass
30
풍량 풍량
동력 동력
토출흡입
동력
풍량 풍량
토출흡입
동력
토출흡입
적정범위
동력
풍량 풍량
토출흡입
적정범위
동력
토출흡입
적정범위
동력
풍압
풍량 풍량
풍압
토출흡입
적정범위
동력
흡입.토출 공용 흡입.토출 공용
동력
동력
동력
동력
동력
동력
동력
동력
풍압
풍압
풍압
풍압
풍압
풍압
bypass bypass
bypass bypass
31
토출흡입
적정범위
풍압
풍량 풍량
풍압
풍압
토출흡입
풍압
동력
동력
동력 동력
토출흡입
적정범위
풍량 풍량
토출흡입
적정범위
토출흡입
적정범위
동력
토출흡입
적정범위
동력
풍압
풍량 풍량
풍압
동력
동력
동력
동력
동
력
동력
bypass bypass
bypass
bypass bypass
32
동력
풍압
토출흡입
동력
토출흡입
적정범위
동력
풍량 풍량
동력
풍압
bypass
33
바이패스 구멍 구경
항상 방전 작업의 컷 - 오프 압력을 가까이 사용하는 경우 바이 패스 구멍은 안전상의 이유로 파이프에 제공되어 있는지 확인바랍니다.
바이 패스 구멍직경은 아래 표 (VFC 시리즈)를 참조하십시오.
형식
형식
형식
※ 상기 이외의 모델에 대한 관련 특성은 곡선을 확인하시기 바랍니다.
단위
34
배기 가스 온도 상승 곡선
풍량
풍량
온도상승
※ 위에 표시된 온도 상승 곡선은 어떤 변화를 가지고 있기 때문에,이를 참고 값으로 고려하십시오
병렬 운전 - 온도와 압력이 매우 높은경우 연속 운전은 피해야 합니다. 그리고 연속운전을 해야 하는경우 병렬 운전 또는 교대운전을 권장합니다.
풍량
온도상승
온도상승)
설치방향
설치는 아래그림을 참조하시기 바라며, 표준설치는 수평으로 설치하는 것을 권장합니다. 설치베이스는 진동을 방지하기 위해 충분히 단단해야합니다. 고무 발 패드, 또는 다른 진동 흡수 장치 및 제품이 권장됩니다.
08 ~ 60 타입
70 ~ 90 타입
35
Nameplates
소음도 데이터
안전한 운전을 보장하기 위해 명찰에 값이 방전 특성입니다.
공기 흐름 볼륨 및 정적 압력 QN 및 PN 최적의 사용 특성 포인트이며, 출력 전류는 LM 및 IR 사용할 방전 특성 포인트는 아래 그림 참조 바랍
니다.
출력
(W
)
현재
(A)
풍량 (m3/min)
보충설명
제한 동작 완전히 닫힌 토출 작업 표준형 실선
저소음 형 점선
측정 방법
풍압
(kP
a)
●최대 값
●
●열 설정
08type
참고 : 위의 노이즈 데이터가 3 상 VF* 시리즈입니다.
90type
80type
70type
60type
50type
40type
30type
20type
10type
08type
90type
80type
70type
60type
50type
40type
30type
20type
10type
①단독으로 사용되는 경우
②파이프 소음기 장착
③파이프 소음기 장착 방음 상자
④단독으로 사용되는 경우
⑤파이프 소음기 장착
⑥파이프 소음기 장착 방음 상자
측정 값의 평균 (1) - (4).
사용 가능 범위
출력
토출측
입구 측현재
공기 흐름 양: QN 최적의 사용 정적
압력 : PN 특성 포인트출력 : LM
사용 가능한 배출 점현재 : IR
최대 토출 측 정압 (Pm)은 바람이 0 상태가됩니다최대공기량 (Qm)는 정압이 0 인 상태가됩니다
운전특성
흡입 측의 특성 값은 공기의 밀도가 낮기 때문에 토출측을
맞춘 상태보다 약간 저하됩니다.
50 Hz에서 60 Hz에서 모두에서 사용할 경우, 명판 60Hz의현재 값을 조정합니다. 오직 50 Hz에서 60 Hz로 사용하는경우, 명판에 해당 현재 값을 조정합니다.
36
병렬운전
병렬운전 배출
병렬 운전에서 동일한 블로워와 특성 곡선.
흡입동작과 특성 적용 사례 1
적용사례 2
필터청소
반복 흡입 및 배출
병렬 작업에서 다른 블로워와 특성 곡선.
병렬운전 흡입
두 개 이상의 장치와 병렬 작업 (아래)이 가능합니다.
흡입작업
블로워는 토출에서 흡입용으로 작업을 전환 할 수 있습니다.
흡입운전에서 압력 특성과 운전효율이 앞으로 약 60 % (아래)로 되어 있음에 유의하시기 바랍니다.
또한, 흡입운전용 공기수송 장비의 다양한 응용에 사용할 수 있습니다.
블로워가 병렬로 동작하는 경우, 압력 특성은 변경되지 않은 상태로 유지하고, 단위 번호 (아래 참조)에 의해 공기 흐름량이 증가합니다.
공기 흐름량이 증가하기 때문에, 송풍기의 부하도 증가하고 가능한 범위는 그래프에 치환됩니다.
환경 개선은 작업이 가능한 범위를 초과하지 않는지 확인해야 합니다.
한 번의 작업으로 사용 가능 범위송풍기 Ⅰ 특성 곡선
저항 곡선 R
일반적인 특성
송풍기 Ⅱ 특성 곡선
풍량 Q 풍량 Q
압력
P
풍량 Q
앞으로 역으로
필터 필터
작은공 작은공
작은공 전송 필터 청소후 작은공
흡입.토출 밸브 간 전환
링블로워
압력
P
출력
앞으
로
역으
로
출력 (앞으로)
출력 (역으로)
압력
P
병렬 운전 가능 범위
Q-P 병렬 운전 2대 단위
Q-P 1 대 단
위
37
모델 선택
블로워의 특성은 배관 조건에 따라 다릅니다. 파이프의 길이와 관절로 인한 손실은 명백히 보다 큰 배관을 요구합
니다. 따라서 최소 길이 및 곡관의 최소 숫자 (예 : 엘보), 조인 및 밸브로 설계되어야 한다. 파이프 직경은 가능한
송풍기 토출 구경에 가깝게 하거나 커야 합니다. 모델 선택 예제의 번호가 아래에 제공됩니다
토출 응용프로그램 예 물방울 날리기
흡입 응용 프로그램 흡입 부착고정하기
필요한 공기 흐름 량 계산
필요한 동적 압력 계산(Pdm)
필요한 공기 흐름 속도 계산
필요한 공기 흐름 량 계산
압력 손실 속도 계산 (슬릿 저항 Pdm)
필요한 정압 계산
모델선정
관 저항 Pd
Slit loss
압력 손실 계산 (관 저항 Pdp)
파이프의 공기 흐름 속도
관압력 저항
필요한 정압 계산
배관 손실 계산 (관 저항 Pdp)
파이프의 공기 흐름 속도
관압력 저항
Elbow Elbow
관 저항 Pd
Elbow Elbow
Elbow
Elbow
조건
1. 필요한 공기 흐름 속도: V1[m/s]2. 슬릿 단면적: S[m2]3. 파이프 직경: φd[m]
파이프 단면적: D[m2] 파이프 길이: L[m]4.
위에서
필요한 공기량 : Q [m3/min]
필요한 정압 : PDT [Pa]
위의 요구 사항을 만족 송풍기를 선택합니다.
모델선정
위에서
필요한 공기 량 : Q [m3/min]
필요한 정압 : PDT [Pa]
위의 요구 사항을 만족하는 송풍기를 선택합니다.
비고λ: 관 마찰 계수 0.02
γ: 공기의 비중 1.2
조건
1. 대량 작업 : W[kg]2. 흡입 영역 : Ss[m2]
열린 공간 : So[m2]3. 파이프 직경 : φd[m]
파이프 단면적 : D[m2]4. 파이프 길이 : L[m]
비고λ: 관 마찰 계수 0.02
γ: 공기의 비중 1.2
38
Bearings and oil seals
[Ring blower]
Model Grease typeBearing
Operation side Reverse operation sideOil seal
Model No. MaterialModel Grease type
BearingOperation side Reverse operation side
Oil sealModel No. Material
UreaUreaUreaUreaUreaUreaUreaUreaUreaUreaUreaUreaUreaUreaUreaUreaUreaUreaUreaUreaUreaUreaUreaUreaUreaUreaUreaUreaUreaUreaUreaUreaUreaUreaUreaUreaUreaUreaUreaLithiumUreaUreaLithiumLithiumLithiumLithiumLithiumLithiumLithiumLithiumLithiumLithiumUreaUreaUreaLithiumUrea
LithiumLithiumLithium
Urea
Urea
LithiumLithiumLithiumLithium
Nitrile rubberNitrile rubberNitrile rubber
Nitrile rubberNitrile rubberNitrile rubber
Nitrile rubberNitrile rubberNitrile rubber
Nitrile rubberNitrile rubberNitrile rubber
Nitrile rubberNitrile rubberNitrile rubber
Nitrile rubberNitrile rubberNitrile rubber
Nitrile rubberNitrile rubberNitrile rubberNitrile rubber
Nitrile rubberNitrile rubberNitrile rubberNitrile rubberNitrile rubberNitrile rubberNitrile rubberSilicon rubberSilicon rubber
Nitrile rubberNitrile rubberNitrile rubberNitrile rubberNitrile rubberNitrile rubberNitrile rubberNitrile rubberNitrile rubberNitrile rubberNitrile rubberNitrile rubberNitrile rubberNitrile rubberNitrile rubber
39
대산특수펌프산업
문의
전화
TE
L O1O-3139-4676
top related