freestanding cabinets flat-pack solutions 6 464...
Post on 13-Sep-2018
213 Views
Preview:
TRANSCRIPT
1/13
Technical data sheet: F01832EN-00 Updated: Created: 01/10/2013
Cat. No(s).: 6 463 50/54/62/66/68/69/70/71/72/73/80/83 6 464 50/51/52/53/54/55/60/62/63/65/66/
71/72/74/75/76/80/81/84/85/86/87
Linkeo 19” freestanding cabinets Flat-pack solutions
1. GENERAL CHARACTERISTICS
Linkeo 19" freestanding cabinets are intended for digital infrastructures.
Linkeo 19" cabinets are metal and provide IP20 - IK08 protection. They have a door with a glass window and are grey RAL 7035.
Linkeo 19" cabinets can be joined together and can be equipped with a plinth.
Equipment and accessories for thermal and cable management such as fan kits, cable trays and shelves, etc. complete the range.
Advantages of flat-pack solutions- Compactness- Transportation easier- Simpler storageEasy to mount :- Possible by 1 person alone in less than 16 minutes- Requires only one tool (10 wrench)- Dedicated installation sheet
1.1 Presentation
The main parts of Linkeo 19" freestanding cabinets are:- A framework consisting of 4 uprights and 2 end plates- Two 19" uprights (two additional uprights possible)As well as: - A front door with a glass window- 2 side panels (excluding extension cabinets)- A rear panel
CONTENTS Page
1. General characteristics. . . . . . . . . . . . . . . . .12. Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23. Technical characteristics . . . . . . . . . . . . . . .34. Packaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45. Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . .56. Baying . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .97. Plinths . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108. Cable management. . . . . . . . . . . . . . . . . . 109. Fan kits. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
10. Castors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1211. 19" equipment . . . . . . . . . . . . . . . . . . . . . . 12
1. GENERAL CHARACTERISTICS (continued)
1.1 Presentation (continued)
The 4 structural uprights and the 2 end plates form a metal framework that is screwed together.
The top and bottom end plates include a cable entry and an area for the fan kit. Pre-cut, they can be knocked out with a mallet.
The whole structure stands on 4 levelling feet.
The front door has a colourless transparent glass window and is fitted with a locking bolt.
The door is reversible and removable.
The side and and rear metal panels have : - A locking bolt - A stainless steel equipotential link clip
Each panel is easily removable.
The clip automatically provides continuity of the metal conductive parts Between each panel and the rest of the cabinet (see section 3.6).
2/13CONTENTS
Technical data sheet: F01832EN-00 Updated: Created: 01/10/2013
Cat. No(s).: 6 463 50/54/62/66/68/69/70/71/72/73/80/83 6 464 50/51/52/53/54/55/60/62/63/65/66/
71/72/74/75/76/80/81/84/85/86/87
Linkeo 19” freestanding cabinets Flat-pack solutions
1. GENERAL CHARACTERISTICS (continued)
1.1 Presentation (continued)
The depth of the 19" uprights can be adjusted in 25 mm steps:
Linkeo 19" freestanding cabinets can be fitted with a setof 2 additional uprights:
Cat. No. Set of two 19" uprights6 463 40 For 24U cabinet6 463 41 For 33U cabinet6 463 42 For 42U cabinet
The 19" uprights are perforated with 9.5 x 9.5 mm square holes.
1.2 Standards
Linkeo 19" freestanding cabinets comply with the following standards:
IEC 60529EN 60529
(NF C 20-010) Degrees of protection provided by enclosures (IP code)
IEC 62262EN 62262
(NF EN 50102, NF C 20-015) Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts (IK code)
IEC 60950-1EN 60950-1C 77-210-1
Safety of information technology equipment
EIA-310-E Cabinets, racks, panels and associated equipment (ANSI/EIA/310-E-2005)
IEC 60297-3-100DIN 41414-7
(NF C 20-150, NF C 20-151) Dimensions of mechanical structures of the 482.6 mm series (19 in)
Linkeo 19" freestanding cabinets can be integrated in installations complying with the following standards:
EN 50173-1 Information technology - Generic cabling systems
EN 50174-1 & 2C 90-480-1 & 2 Information technology - Cabling installation
ISO IEC 11801 Information technology - Generic cabling for customer premises
NF C 15-100Partie 4-41
Low voltage electrical installations - recommendations
IEC 60364-4-41Low voltage electrical installations - Protection for safety- Protection against electric shock
25 mm
(1) Designated dimensions. See section 5.1 for overall dimensions.(2) Baying kit to be ordered separately (see section 6)
2. RANGE
Linkeo 19’’ freestanding cabinets supplied in flat-pack are available in 2 ways :- All in one, 1 part number to be ordered- To be made of 4 part numbers
2.1 Cabinet supplied as 1 part number
Linkeo 19’’ freestanding cabinets supplied in flat pack as 1 part number offer the following advantages :- All parts supplied in a single packing- A high protection packaging especially for long distance
transportation- A stackable wooden crate
Cat. No. Capacity Width (1) (mm)
Depth (1) (mm)
6 463 50 24U 600 600
6 463 54 24U 800 800
6 463 62 33U 600 600
6 463 66 33U 800 800
6 463 68 42U 600 600
6 463 69 42U 600 800
6 463 70 42U 600 1000
6 463 71 42U 800 600
6 463 72 42U 800 800
6 463 73 42U 800 1000
Two extension freestanding cabinets complete the range. These are supplied without side panels and with a baying kit:
Extension cabinets
Cat. No. Capacity Width (1) (mm)
Depth (1) (mm)
6 463 80 42U 600 600
6 463 83 42U 800 800
2.2 Cabinet supplied as 4 part number
Linkeo 19’’ freestanding cabinets supplied in flat pack as 4 part number offer the following advantages :- Transportation and storage cost reduction- Easy handling (small and light packages)- Easy to configure extension cabinet(2)
- Four additional cabinets sizes- Keep door and panels apart to protect them
See charts on following page.
3/13CONTENTS
Technical data sheet: F01832EN-00 Updated: Created: 01/10/2013
Cat. No(s).: 6 463 50/54/62/66/68/69/70/71/72/73/80/83 6 464 50/51/52/53/54/55/60/62/63/65/66/
71/72/74/75/76/80/81/84/85/86/87
Linkeo 19” freestanding cabinets Flat-pack solutions
2. RANGE (continued)
2.2 Cabinet supplied as 4 part number (continued)
Linkeo 19’’ freestanding cabinets are split up into 4 part numbers :
Cat. No. For cabinet (Width/Depth in mm)
Roof-base (1)
6 464 50 W. 600 x D. 6006 464 51 W. 600 x D. 8006 464 52 W. 600 x D. 10006 464 53 W. 800 x D. 6006 464 54 W. 800 x D. 8006 464 55 W. 800 x D. 1000
Structural uprights and two 19’’ uprights
6 464 60 capacity 24U6 464 62 capacity 33U6 464 63 capacity 42U
Set of 2 side panels
6 464 65 24U D. 6006 464 66 24U D. 8006 464 71 33U D. 6006 464 72 33U D. 8006 464 74 42U D. 6006 464 75 42U D. 8006 464 76 42U D. 1000
Front door and rear panel
6 464 80 24U W. 6006 464 81 24U W. 8006 464 84 33U W. 6006 464 85 33U W. 8006 464 86 42U W. 6006 464 87 42U W. 800
The following selection chart gives the catalogue numbers to be orde-red for each cabinet size :
Cabinet sizes (2)
capacity Width x Depth
(mm)
Roof-base Structural uprights
and two 19’’ uprights
Side panels
Front door and
rear panel
24U 600 x 600 6 464 50 6 464 60 6 464 65 6 464 8024U 600 x 800 6 464 51 6 464 60 6 464 66 6 464 8024U 800 x 600 6 464 53 6 464 60 6 464 65 6 464 8124U 800 x 800 6 464 54 6 464 60 6 464 66 6 464 8133U 600 x 600 6 464 50 6 464 62 6 464 71 6 464 8433U 600 x 800 6 464 51 6 464 62 6 464 72 6 464 8433U 800 x 600 6 464 53 6 464 62 6 464 71 6 464 8533U 800 x 800 6 464 54 6 464 62 6 464 72 6 464 8542U 600 x 600 6 464 50 6 464 63 6 464 74 6 464 8642U 600 x 800 6 464 51 6 464 63 6 464 75 6 464 8642U 600 x 1000 6 464 52 6 464 63 6 464 76 6 464 8642U 800 x 600 6 464 53 6 464 63 6 464 74 6 464 8742U 800 x 800 6 464 54 6 464 63 6 464 75 6 464 8742U 800 x 1000 6 464 55 6 464 63 6 464 76 6 464 87Extension cabinet Same as above, without side panels
(1) Top and bottom end plates to mount with the four structural uprights and the 19” uprights
(2) Designated dimensions. See section 5.1 for overall dimensions.
3. TECHNICAL CHARACTERISTICS
3.1 Index of protection
- IP20 according to IEC EN 60529 Protected against solid objects larger than 12.5 mm in diameter
- IK08 according to IEC EN 62262 Protected against mechanical impact with an energy of 5 joules
3.2 Mechanical performance
- Permissible load: 400 kg
3.3 Design
- Structural uprights and upper end plate made of 1.5 mm thick galvanised steel + paint
- Lower end plate made of 1.5 mm thick Z140 MB-C galvanised steel
- Front door made of 1.2 mm thick steel + paint: vertical uprights grey RAL 7035, top and bottom strips charcoal grey RAL 7016 Window made of 4 mm thick colourless transparent safety glass.
- Door hinges made of galvanised steel
- Legrand marked in RAL 7016 on door
- Panels made of 1.2 mm thick sheet steel + paint
- Door and panel bolts made of chrome-plated metal
- 19" uprights made of 2 mm thick galvanised steel
- Levelling feet made of zinc-plated steel with black polypropylene fixed base
3.4 Corrosion resistance
- Corrosive environment class: C2 according to EN ISO 12944-2, 3K3 according to IEC EN 60721-3-3
- Salt spray test according to ISO 9227 (NSS test) and IEC EN 60068-2-11 (Ka test) for 168 hours: degree of rusting Ri1 according to ISO 4628-3, propagation ≤ 1 mm according to ISO 4628-8
- Sulphur dioxide (SO2) test according to EN ISO 6988 for 48 hours: degree of rusting Ri1 according to ISO 4628-3, ISO 10289 annex A class 8 type image
3.5 Properties of the paint coating
- Thermosetting polyester paint applied by electrostatic dusting
- Grey RAL 7035 ( horizontal door strips: charcoal grey RAL 7016)
- Textured satin appearance
- 60 to 80 mm μm thick
- Excellent impact and scratch resistance
- Excellent resistance to cleaning agents (excluding strong chlorinated, fluorinated and ketone solvents) Some products may change the appearance. It is therefore advisable to carry out a test first
- Light exposure test (xenon-arc lamp) according to ISO 4892-2 method B for 500 hours: no visible fading
3.6 Electrical continuity of the conductive parts
Continuity of the cabinet metal conductive parts is achieved by design, or should be achieved with the components supplied (door protective conductor, side panels clips, specific fastenings).
The mounting instructions in the manual supplied with the products should be strictly respected.
4/13CONTENTS
Technical data sheet: F01832EN-00 Updated: Created: 01/10/2013
Cat. No(s).: 6 463 50/54/62/66/68/69/70/71/72/73/80/83 6 464 50/51/52/53/54/55/60/62/63/65/66/
71/72/74/75/76/80/81/84/85/86/87
Linkeo 19” freestanding cabinets Flat-pack solutions
3. TECHNICAL CHARACTERISTICS (continued)
3.7 Weight
Net weight excluding packaging.
Cabinet sizes (1) Capacity Width x Depth (mm)
Weight (kg)
Cabinet (2) Extension cabinet
24U 600 x 600 72 58
24U 600 x 800 80 65
24U 800 x 600 88 68
24U 800 x 800 91 70
33U 600 x 600 76 61
33U 600 x 800 84 68
33U 800 x 600 94 72
33U 800 x 800 98 75
42U 600 x 600 89 71
42U 600 x 800 99 76
42U 600 x 1000 121 88
42U 800 x 600 111 86
42U 800 x 800 115 88
42U 800 x 1000 146 104
Cat. No.Overall dimensions (mm) Volume
(m3)Weight
(kg)H(1) x W x D
6 463 50 490 x 1320 x 710 0.460 876 463 54 440 x 1605 x 910 0.643 1166 463 62 490 x 1720 x 710 0.600 1046 463 66 440 x 1720 x 910 0.690 1456 463 68 450 x 2120 x 710 0.677 1206 463 69 450 x 2120 x 910 0.870 1396 463 70 450 x 2120 x 1110 1.059 1656 463 71 400 x 2120 x 910 0.772 1736 463 72 400 x 2120 x 910 0.772 1736 463 73 400 x 2120 x 1110 0.941 2036 463 80 450 x 2120 x 710 0.677 1026 463 83 400 x 2120 x 910 0.772 146
(1) With cover
4.2 Cabinet supplied as 4 part numbers (4 packages)
The products packaging are composed of cardboard protections wrapped with a transparent film.
Cat. No. Overall dimensions (mm)
Volume (m3)
Weight (kg)
Roof-base
6 464 50 210 x 640 x 640 0.086 14.56 464 51 210 x 640 x 840 0.113 18.56 464 52 210 x 640 x 1040 0.140 22.56 464 53 160 x 840 x 640 0.086 196 464 54 160 x 840 x 840 0.113 24.56 464 55 160 x 840 x 1040 0.140 30
Structural uprights and two 19’’ uprights
6 464 60 1270 x 210 x 60 0.016 12.56 464 62 1670 x 210 x 60 0.021 16.56 464 63 2070 x 210 x 60 0.026 20
Set of 2 side panels
6 464 65 1270 x 560 x 72 0.051 13.56 464 66 1270 x 760 x 72 0.070 186 464 71 1670 x 560 x 72 0.067 17.56 464 72 1670 x 760 x 72 0.091 246 464 74 2070 x 560 x 72 0.083 21.56 464 75 2070 x 760 x 72 0.113 306 464 76 2070 x 960 x 72 0.143 37.5
Front door and rear panel
6 464 80 1310 x 700 x 92 0.084 186 464 81 1310 x 900 x 92 0.108 226 464 84 1710 x 700 x 92 0.110 22.56 464 85 1710 x 900 x 92 0.141 296 464 86 2110 x 700 x 92 0.136 27.56 464 87 2110 x 900 x 92 0.175 35.5
H
D
W
(1) Designated dimensions, see section 5.1 for overall dimensions(2) Cabinet with front door, rear panel and side panels
4. PACKAGING
4.1 Cabinet supplied as 1 part number
All the cabinet components are packed in a wooden crate (lined with a cardboard inside). The wooden crate is capable of being manipulated with a pallet truck and can be stack on 5 levels (identical cabinet part numbers).
5/13CONTENTS
Technical data sheet: F01832EN-00 Updated: Created: 01/10/2013
Cat. No(s).: 6 463 50/54/62/66/68/69/70/71/72/73/80/83 6 464 50/51/52/53/54/55/60/62/63/65/66/
71/72/74/75/76/80/81/84/85/86/87
Linkeo 19” freestanding cabinets Flat-pack solutions
FRONT VIEW
VIEW FROM ABOVE
135°
REAR VIEWSIDE VIEW
Overall DW
A
H1
H2
BD W
5. DIMENSIONS
All dimensions are in mm.
Unless otherwise indicated, the shown and quoted cabinets are equipped with a front door, and side and rear panels.
5.1 Dimensions
Model shown: 600 x 600 mm cabinet
5. DIMENSIONS (CONTINUED)
5.2 Glass window in front door
Capacity W(1) D(1)Overall dimensions
H1(2) H2 min / max(3) W D A B24U 600 600 1226 1241 / 1271 610 630 1015 121024U 600 800 1226 1241 / 1271 610 830 1015 141024U 800 600 1226 1241 / 1271 810 630 1355 141024U 800 800 1226 1241 / 1271 810 830 1355 161033U 600 600 1626 1641 / 1671 610 630 1015 121033U 600 800 1626 1641 / 1671 610 830 1015 141033U 800 600 1626 1641 / 1671 810 630 1355 141033U 800 800 1626 1641 / 1671 810 830 1355 161042U 600 600 2026 2041 / 2071 610 630 1015 121042U 600 800 2026 2041 / 2071 610 830 1015 141042U 600 1000 2026 2041 / 2071 610 1030 1015 161042U 800 600 2026 2041 / 2071 810 630 1355 141042U 800 800 2026 2041 / 2071 810 830 1355 161042U 800 1000 2026 2041 / 2071 810 1030 1355 1810
Capacity Width (1) Glass window dimensions24U 600 1073 x 36024U 800 1073 x 45033U 600 1473 x 36033U 800 1473 x 45042U 600 1873 x 36042U 800 1873 x 450
Note:
The door opening angle is 105° when cabinets are joined (See section 6)
Extension cabinets : dimensions same as above except ‘’W’’ overall dimension reduced of 10 mm
(1) Designated dimensions(2) Without level adjustment feet(3) With level adjustment feet (+15 to 45 mm) (1) Designated dimensions
6/13CONTENTS
Technical data sheet: F01832EN-00 Updated: Created: 01/10/2013
Cat. No(s).: 6 463 50/54/62/66/68/69/70/71/72/73/80/83 6 464 50/51/52/53/54/55/60/62/63/65/66/
71/72/74/75/76/80/81/84/85/86/87
Linkeo 19” freestanding cabinets Flat-pack solutions
5. DIMENSIONS (CONTINUED)
5.3 Usable dimensions
5.3.1 600 mm wide freestanding cabinets
600 mm wide cabinets are available in 3 heights: 24U, 33U and 42U
5. DIMENSIONS (CONTINUED)
5.3 Usable dimensions (continued)
5.3.1 600 mm wide freestanding cabinets (continued)
600 mm wide cabinets are available in 3 depths: 600, 800 and 1,000 mm. Model shown: 600 x 600 mm cabinet
FRONT VIEW (without door)
Capa
city
24U
/ 33
U /
42U
Usa
ble
spac
e 10
86 /
1486
/ 18
86
7070
AA
600
Usable space 450
Usable space 490
SIDE VIEW (without side panels)
Capa
city
24U
/ 33
U /
42U
Usa
ble
spac
e 99
6 / 1
396
/ 179
6
115
115
600 / 800 / 1000
630 / 830 / 1030
425 max / 625 max / 825 max
Can be adjusted in 25 mm steps (4 x 25 mm)
Usable space 490 / 690 / 890
Set of 2 additional 19" uprights Cat. Nos. 6 643 40/41/42
7/13CONTENTS
Technical data sheet: F01832EN-00 Updated: Created: 01/10/2013
Cat. No(s).: 6 463 50/54/62/66/68/69/70/71/72/73/80/83 6 464 50/51/52/53/54/55/60/62/63/65/66/
71/72/74/75/76/80/81/84/85/86/87
Linkeo 19” freestanding cabinets Flat-pack solutions
5. DIMENSIONS (CONTINUED)
5.3 Usable dimensions (continued)
5.3.1 600 mm wide freestanding cabinets (continued)
5. DIMENSIONS (CONTINUED)
5.3 Usable dimensions (continued)
5.3.2 800 mm wide freestanding cabinets
800 mm wide cabinets are available in 3 heights: 24U, 33U and 42U
Note: The dimensions of the upper and lower end plates are identical.
(1) Dimension below door on 19" uprights(2) Can be adjusted in 25 mm steps(3) See front view on page 7
VIEW FROM ABOVE
CROSS-SECTION VIEW(3) (with door)
98600
404
340
600
/ 800
/ 10
00
9034
0
5257
/ 25
7 / 4
57
182
106
(206
max
)85
(185
max
)
41
600
600
/ 800
/ 10
00
507
/ 707
/ 90
7
425
max
/ 62
5 m
ax
Fixing centres 465 (19")
Usable space 450
(2)
(1) (
2)
Set of 2 additional 19" uprights Cat. Nos. 6 643 40/41/42
FRONT VIEW (without door)
Usable space 690
Usa
ble
spac
e 10
86 /
1486
/ 18
86
Capa
city
24U
/ 33
U /
42U
7070
AA
800
Usable space 450
88
8/13CONTENTS
Technical data sheet: F01832EN-00 Updated: Created: 01/10/2013
Cat. No(s).: 6 463 50/54/62/66/68/69/70/71/72/73/80/83 6 464 50/51/52/53/54/55/60/62/63/65/66/
71/72/74/75/76/80/81/84/85/86/87
Linkeo 19” freestanding cabinets Flat-pack solutions
5. DIMENSIONS (CONTINUED)
5.3 Usable dimensions (continued)
5.3.2 800 mm wide freestanding cabinets (continued)
800 mm wide cabinets are available in 3 depths: 600, 800 and 1000 mm Model shown: 800 x 800 mm cabinet
5. DIMENSIONS (CONTINUED)
5.3 Usable dimensions (continued)
5.3.2 800 mm wide freestanding cabinets (continued)
Model shown: 800 x 800 mm cabinet
SIDE VIEW (without side panels)
Capa
city
24U
/ 33
U /
42U
Usa
ble
spac
e 99
6 / 1
396
/ 179
6
120
6812
068
600 / 800 / 1000
630 / 830 / 1030
425 max / 625 max / 825 max
Usable space 490 / 690 / 890
Can be adjusted in 25 mm steps (4 x 25 mm)
Set of 2 additional 19" uprights Cat. Nos. 6 643 40/41/42
Cable management ring fixing points(1)
A-A CROSS-SECTION VIEW(3) (with door)
VIEW FROM ABOVE
106
(206
max
)85
(185
max
)
141
800
600
/ 800
/ 10
00
507
/ 707
/ 90
7
425
max
/ 62
5 m
ax /
825
max
Fixing centres 465 (19")
Usable space 450
(2)
(1) (
2)
Set of 2 additional 19" uprights Cat. Nos. 6 643 40/41/42
153800
494
340
600
/ 800
/ 10
00
9034
0
5257
/ 25
7 / 4
57
182
Note: The dimensions of the upper and lower end plates are identical.
(1) Dimension below door on 19" uprights(2) Can be adjusted in 25 mm steps(3) See front view on page 8
(1) See sections 8.2 et 5.3.3
9/13CONTENTS
Technical data sheet: F01832EN-00 Updated: Created: 01/10/2013
Cat. No(s).: 6 463 50/54/62/66/68/69/70/71/72/73/80/83 6 464 50/51/52/53/54/55/60/62/63/65/66/
71/72/74/75/76/80/81/84/85/86/87
Linkeo 19” freestanding cabinets Flat-pack solutions
5. DIMENSIONS (CONTINUED)
5.3 Usable dimensions (continued)
5.3.3 19" uprightsØ 5,2
9,5
8,25
23,8
15,8
715
,87
44,4
544
,45
50
2
31,25
7,5
222
13
5017
24U
- 1
070 22
222
222
2
311
311
311
311
29U
- 1
470
267
267
267
267
267
267
42U
- 1
870
9,5
5.4 Positioning of supports on the floor
The freestanding cabinets are equipped with 4 levelling feet.
VIEW FROM BELOW
82 82600 / 800
436 / 636
600
/ 800
/ 10
00
346
/ 546
/ 76
4
127
Feet Ø38
The crosspiece provides protection against dust and maintains the IP20 protection of the cabinets at the top.
VIEW OF JOINED CABINETS FROM ABOVE
800
105° max.
800
1600 (1610 overall)
6. BAYING
Linkeo 19’’ freestanding cabinets can be laterally joined using baying kit Cat. No 6 463 37.
Note: The range of cabinets supplied as 1 part number includes extension cabinets for the 42U x 600 x 600 and 42U x 800 x 800 sizes. These special cabinets are supplied with the baying kit and without side panels. Concerning the range of cabinets supplied as 4 part numbers, the baying kit must be ordered separately.
The kit consists of:- 4 galvanised steel lugs- A steel crosspiece + paint (same as cabinets)- Fixing screwsThe crosspiece can be separated manually to make it suitable for the various cabinet depths.
10/13CONTENTS
Technical data sheet: F01832EN-00 Updated: Created: 01/10/2013
Cat. No(s).: 6 463 50/54/62/66/68/69/70/71/72/73/80/83 6 464 50/51/52/53/54/55/60/62/63/65/66/
71/72/74/75/76/80/81/84/85/86/87
Linkeo 19” freestanding cabinets Flat-pack solutions
7. PLINTHS
Linkeo 19" freestanding cabinets can be equipped with a 100 mm high metal plinth.
Cat. No. For cabinet Width x Depth (mm)6 464 00 600 x 6006 464 01 600 x 800 / 800 x 6006 464 02 600 x 10006 464 03 800 x 8006 464 04 800 x 1000
Linkeo plinths consist of 4 corner blocks and 4 removable traps.
The plinths are the same colour as the cabinets (grey RAL 7035).
The plinth is fixed directly to the cabinet end plate:
8. CABLE MANAGEMENT
8.1 Vertical cable trays
A side and/or rear cable trays can be installed in Linkeo 19" freestanding cabinets.
They are mounted directly on the structure:
B
D
P
C
AL
10014
WD
Note: It is possible to place 2 plinths one on top of the other.
Characteristics- Plinth fixed using M12 screws- Traps fixed using white zinc-plated M6 screws- Corner blocks made of 2 mm thick steel + paint (same as cabinets)- Traps made of 2 mm thick steel + paint (same as cabinets)- Supplied with complete set of screws for the equipotential link with
the cabinet- Can be fixed to the floor (screws not supplied)
B
D
P
C
AL
10014
(1) Identical dimensions when fixed to the floor
W x DDimensions (mm)
Overall Fixing(1) Usable spaceWidth Depth A B C D
600 x 600 600 600 478 478 336 336600 x 800 600 800 478 678 336 536
600 x 1000 600 1000 478 878 336 736800 x 600 800 600 678 478 536 336800 x 800 800 800 678 678 536 536
800 x 1000 800 1000 678 878 536 736
Cat. No. Vertical cable tray6 464 20 For 33U cabinet6 464 21 For 42U cabinet
Characteristics- 50 x 7 mm oblong perforations
(possibility of clamping using cable ties)- Supplied with screws- 1.5 mm thick Z140 MB-C galvanised steel
Cat. No. Overall dimensions (mm)6 464 20 1486 x 300 x 256 464 21 1886 x 300 x 25
Mounted at the back, the tray is centrally positioned in the cabinet width.
For side mounting, the table below gives the position of the tray axis in relation to the back of the cabinet:
Depth
A
Cabinet depth A600 249800 216
1000 216
WidthDepth
11/13CONTENTS
Technical data sheet: F01832EN-00 Updated: Created: 01/10/2013
Cat. No(s).: 6 463 50/54/62/66/68/69/70/71/72/73/80/83 6 464 50/51/52/53/54/55/60/62/63/65/66/
71/72/74/75/76/80/81/84/85/86/87
Linkeo 19” freestanding cabinets Flat-pack solutions
8. CABLE MANAGEMENT (continued)
8.2 Cable management ring
Linkeo 19" 800 mm wide freestanding cabinets can be fitted with metal cable management rings Cat. No. 6 464 25 (set of 6).
The rings are mounted on the outside of the 19" uprights:
Cabinet capacity No. of ring fixing points
24U / 33U 5 per 19" upright
42U 7 per 19" upright
Positioning the fixing points, see section 5.3.3
Characteristics- Set of 6 rings- Usable dimensions: 65 x 145 mm- Supplied with screws- Painted steel, 2.5 mm thick- Black RAL 9005
8.3 Self-locking cable ties
Self-locking cable ties are repositionable textile ties that do not damage cables.
Characteristics- IP XXB - IK08- 230 V~ - 50/60 Hz power supply
Cat. No. Current (A) Power (W)6 464 30 0.25 366 464 31 0.50 72
- Integrated thermostat, adjustable from 10° to +80 °C- Equipped with 3 x 0.75 mm2 flexible power supply cords, 2.5 m long
with standard 2P+E French/German plug- Fixed using self-tapping screws with pins (supplied)- Plate made of steel + paint (same as cabinets)- Grey RAL 7035
Cat. No. Colour Width (mm)
Length (mm)
Max. tightening
Ø (mm)
0 331 84 Black 16 150 35
0 331 85 Red 16 150 35
0 331 86 Green 16 150 35
0 331 87 Black 16 300 80
0 331 88 Red 16 300 80
0 331 89 Green 16 300 80
- Tensile strength: > 220 N- Fire resistance: UL 94 V2- Double-sided textile with "loops" on one side and "hooks" on the other
9. FAN KITS
Linkeo 19" freestanding cabinets can take a fan kit. Installed at the top, it ensures a high extraction rate.
Cat. No. No. of fans Output (m3/h)6 464 30 2 1806 464 31 4 360
Once you have knocked out the cut-out with a mallet, the kit is fixed directly to the cabinet end plate:
345 3455334
5
325 325
325
345 34553
345
325 325
325
12/13CONTENTS
Technical data sheet: F01832EN-00 Updated: Created: 01/10/2013
Cat. No(s).: 6 463 50/54/62/66/68/69/70/71/72/73/80/83 6 464 50/51/52/53/54/55/60/62/63/65/66/
71/72/74/75/76/80/81/84/85/86/87
Linkeo 19” freestanding cabinets Flat-pack solutions
10. CASTORS
Linkeo 19" freestanding cabinets can be equipped with a set of 4 pivoting castors Cat. No. 0 464 82.
Caution :
The total load on the 4 castors must not exceed 500 kg.
Characteristics- Set of 4 castors, 2 of which have brakes- Raise cabinet by 81 mm- Supplied with fixing screws- Black plastic wheel
65,8
68 3
Ø 55
8,8 x 10,8
Ø 178
Ø 105
53,5
8125
1847 70
,5
11. 19" EQUIPMENT
11.1 Management panels with 2 axes
- Metal panels with horizontal and front to back feedthrough
Cat. No. Height Depth (mm)
Feedthrough dimensions
(mm)
Ring usable dimensions
(mm)6 465 20 1U 68 20 x 60 39 x 456 465 21 2U 77 64 x 60 65 x 55
- Panels made of 1 mm thick steel- Rings made of 2.5 mm thick steel- Supplied with screws and cage nuts with pins- Black RAL 9005
11.2 Fixed shelves
11.2.1 Projecting mounting fixed shelf
- Fixed by screwing onto 2 x 19" uprights
Cat. No. Depth (mm) Usable width (mm)6 465 01 200 4356 465 02 360 435
- Height 2U- Max. load: 15 kg- 50 x 7 mm oblong perforations
(possibility of clamping using cable ties)- Supplied with screws and cage nuts with pins- 1.5 mm thick steel- Black RAL 9005
11.2.2 Fixed shelf for fixing on 4 x 19" uprights
- Screw fixing- Can be adjusted in 25 mm steps to the
depth of the 19" uprights
Cat. No. For cabinet depth (mm)
Depth (mm)
Width (mm)
6 465 05 600 425 4406 465 06 800 625 4406 465 07 1000 825 440
- Height 1U- Max. load: 50 kg- 50 x 7 mm oblong perforations
(possibility of clamping using cable ties)- Supplied with screws and cage nuts with pins- Shelf made of 1.5 mm thick steel- Black RAL 9005
13/13CONTENTS
Technical data sheet: F01832EN-00 Updated: Created: 01/10/2013
Cat. No(s).: 6 463 50/54/62/66/68/69/70/71/72/73/80/83 6 464 50/51/52/53/54/55/60/62/63/65/66/
71/72/74/75/76/80/81/84/85/86/87
Linkeo 19” freestanding cabinets Flat-pack solutions
11. 19" EQUIPMENT (continued)
11.3 Telescopic shelves
- Fixed by screwing onto 4 x 19" uprights- Can be adjusted to the depth
of the 19" uprights
Cat. No. For cabinet depth (mm)
Depth (mm)
Width (mm)
Travel (mm)
6 465 08 600 425 410 2956 465 09 800 625 410 4456 465 10 1000 825 410 660
- Height 1U- Max. load: 30 kg- 50 x 7 mm oblong perforations
(possibility of clamping using cable ties)- Supplied with screws and cage nuts with pins- Shelf made of 1.5 mm thick steel- Black RAL 9005- Ball-bearing runners
Caution :
If there is a risk of tilting when heavy items are removed, the cabinet must be fixed to the floor.
11.4 19" PDUs- Designed to provide 230 V~ power supply for active products- For mounting on 19" fixing centres- 2P+E sockets- Equipped with a flexible 2 m power supply cord, 3 x 1.5 mm2 with plug- Height 1U- Supplied with screws- Black aluminium body, black steel fixing lugs
Cat. No.2P+E sockets Additional
functionNumber Standard
6 465 50 9 French -
Belgian
—
6 465 51 8 Switch with indicator
6 465 55 9German
—
6 465 56 8 Switch with indicator
6 465 60 8British
—
6 465 61 7 Switch with indicator
top related