free magnetic motor show01

ALAM SHAH SCIENCE SCHOOL• Mohd. Khairul Amirin Mohd. Khairudin• Roshandharan N. Chanthiran• Ahmad Iqbal Mohd. Shahir Shamsir

MALAYSIA

FREE ENERGY MAGNET MOTOR

• To create a motor that runs on limitless energy.

• To create an energy saving and environmental-safe motor.

• To provide cheap and easy maintenance energy provider.

Objectives

Mobile phones and electronic

devices need to be charged

Create a motor that can run by itself by using

magnetic field to spin the dynamo

generator or motor.

Then connect it to USB port.

Chargernot

portable

Problems

PowerBanks

CurrentSolution Problems

Can be costly

Doesn’t last long

Limited EnergySupply

SuggestedSolution

Needed tobe charged

Free Energy Magnet Motor

Provides limitless energy

Easy maintenance

and cheap

Charge electronic

devices from USB port

Needs no external

sources of electric power

Portable and can be used anywhere

Main Materials in Building the Motor:

• Strong magnets• Fan• Dynamo generator or motor• Gears and a trigger• Electronic components such

as transistor etc.• USB port

A trigger is used to start

the fan

Connected

Connected

Magnetic field produced from magnets in outer ring

and in fan blades

Connected to

User pushes the trigger

which then will turn the fan.

mechanically.

The fan turns continuously due to

magnetic field produced by the magnets in fan

blades and outer ring.

The fan then turns the dynamo

generator or motor which is connected

by small gears

Kinetic energy is converted to

electrical energy

Connected to USB port and has LED as an

indicator.

How It Works

Problems in the Project

Strong magnets needed to

rotate the fan.

If resistance too high in the

generator or motor, energy will be lost to heat energy.

Magnets around the fan must be

at the right positions to

achieve equilibrium.

Future Plans

Increase market areas

Improvement on electronic devices to last

longer

To save the environment by replacing

fuel generators

To be used for larger and higher

capacity electronic

devices

ALAM SHAH SCIENCE SCHOOL

Mohd. Khairul Amirin Mohd. Khairudin

Ahmad Iqbal Mohd. Shahir Shamsir

Roshandharan N. Chanthiran

MALAYSIA