fp-02 cable tray installation methods

System number Penetration Items UL1479

Materials F T

F-B-8007

Metallic pipe

2 0 FP-02 FM011

Ceramic fiber cotton 8P

Cable bundle

Cable tray

Metallic insulated pipe SSCI-X

Air duct Ceramic fiber cotton 8P

FP-02 Cable Tray Installation Methods FP-02 Standards, Codes Compliances

A2：Concrete floor B4：Cable tray

1：FP-02 firestop sheet 2：FM011 Moldable firestop putty

A2 B4

2

1

Cross-sectional view

Firestop Materials 1：FP-02 Firestop sheet 2：FM011 Moldable firestop putty

International Fireproof Technology Inc. The Ultimate in Firestop Solutions and Fire Protective Coatings

www.painttoprotect.com

949-975-8588

Box Cutter knife Metal Ruler Brush

Jigsaw Power Drill Drill Bit

Measuring Tape

Expansion Bolts

Hexa-Wrench Hammer Self-tapping screws Power Drill (use on the wall)

Installation Equipment

Process of Installation

1. Clean the opening 2. Measure the opening between the

cable tray and substrate.

3. Install FM011 Moldable Firestop Putty onto the cables in the cable tray.

4. FM011 shall be firmly packed into the cable tray and extend beyond the cable tray by 3”.

5. Cut FP-02 firestop sheet and exceed the opening on all sides by 2”

6. Secure FP-02 on the top side of floor ensuring the aluminum foil side of sheet is against the substrate.

8. Any gaps between the FP-02 sheet and cable tray shall be sealed with FM011 such that makes a crown shape

7. Install a 2” wide strip of FP-02 over any joints.

9. Crown shape FM011 shall extend beyond the top of the cable tray by 3”, and by 4” from the bottom

10. Completed Installation