form talysurf series 2 - ilusionideas · 2010. 7. 27. · 5 form talysurf series 2 significance of...
Post on 15-Nov-2020
9 Views
Preview:
TRANSCRIPT
Form Talysurf Series 2
2
ContentsForm Talysurf Series 2 ............. 2-3
The measurement of surfaces .. 4-5
Calibration of the system .......... 6-7
Choosing the right product
Inductive systems ...................... 8
PGI systems .............................. 9
Traverse units ........................... 10
Measuring stations .................... 11
µltra Software
Overview ................................... 12-13
Assessment of dimensionform and texture ......................... 14-17
Form Talysurf software options ... 18
3D Topography measurement .... 19
Accessories ............................... 20-21
Specification
PGI systems ............................. 22
Inductive systems ...................... 23
For your industry
Form Talysurf Series 2 is acomprehensive range of highperformance hardware andsoftware that offers exceptionalproductivity for a wide range ofindustries and applications.
For your budget
Whether for general purpose orto solve a specific applicationproblem, Form Talysurf Series 2hardware and software can beconfigured into a system thatperforms within your budget.
For your future
Unlike closed end systems thatgo completely obsolete whenyour requirements change, FormTalysurf Series 2 system capabilitycan be expanded to meet whateverthe future brings.
Form Talysurf Series 2
3
Form Talysurf Series 2 For simultaneous measurement of dimension, form and surface texture
Designed to measure all elements of surface geometry with the greatest possible accuracy inthe shortest possible time.
Curvature, inclination, roughness and waviness all affect the way surfaces interact with othersurfaces. Form Talysurf detects and evaluates all elements with just a single traverse acrossthe component.
Impressive pedigree
The original Form Talysurf wasdeveloped in 1984 specifically forthe precision bearing industry.
As the first instrument ever tomeasure dimension, form andtexture on curved surfaces, itshowcased the unique ability ofTaylor Hobson engineers to leadrather than follow industry trends.
Over the years the basic premisehas been refined, improved andexpanded to suit other industries,but like many truly groundbreakingideas it has never been surpassed.
0.8nm / PGI Plus
Taylor Hobson has shattered the range to resolution barrier with an
unprecedented ratio
12,480,000:1
Designed specifically for the highest level of manufacturing precision, the new PGI Plus
provides 10mm of range with 0.8nm resolution.
4
What is form?
Form is deviation away fromthe intended nominal shapeof the surface, ignoring variations due to roughnessand waviness.
All objects have measurabledeviations from the intendedshape that can be caused byvarious factors:
• Clamping during machiningthat is too firm or not firm enough
• Inaccuracies of the slides or guide-ways in the machine tool
• Inadequate or improper stress relief of the component
• Sagging of the component under its own weight
• Thermal effects produced during machining
Deviations from intendedshape will affect performanceand useful life of a component.
What is waviness?
Waviness is typically an undesiredmachine tool effect that is almostalways present in manufacturedsurfaces.
Waviness, usually periodic inappearance, is distinguishedfrom roughness by exhibitinglarger horizontal wavelength.
To the extent that waviness is acharacteristic produced by animperfect machine it can beminimized by attention to thefollowing:
• Vibration caused by lack of stiffness or a balance problem
• Deflection of the tool path caused by asymmetric forces
Waviness is especially criticalon surfaces designed to function in contact with othersurfaces.
The measurement of surfacesThe three elements of a surface - dimension, form and texture - are inseparable in the function of a component.Therefore measuring one element without regard to the others can result in misleading or incorrect analysis.
Dimension (nominal shape)Form deviationWavinessRoughness
Measure all three at once
Form Talysurf instrumentsmeasure dimension, form,and texture simultaneously.This ensures that eachelement is evaluated as itshould be - in relation to theother elements and how theyfunction together.
What is dimension?
Dimensions (radius, distanceand angle) are used to definethe functional shape of a surface.
Many objects have obviousshape such as bearing balls orspherical lenses while otherobjects are designed to bewithout shape such as flatsealing surfaces.
The shape of surface featuresand the linear relationshipbetween features can beassessed and compared usingpowerful analysis tools:
• Least squares arc (radius)
• Least squares or minimumzone line (angle)
• True X and Z co-ordinate positions
The elements of a surface are inseparable in the function of a component (not drawn to scale)
5
Form Talysurf Series 2
Significance of a straight line
Imperative to the measurementof form is the integrity of the reference to which themeasured surface is compared.Form Talysurf traverse unitsare designed and manufacturedto exacting standards.
Either a 50mm (1.97in) or120mm (4.72in) traverselength can be provided.
Both have a precisionstraightness datum and horizontal data logging vialinear scale and reading head.
The datum bar is made of tool steel subjected to a proprietary heat treatment to ensure optimum stability
Datum bar and carriage use lowfriction bearings machined inplace for flatness and squareness
Exceptionally low systemnoise enables maximum useof gauge resolution
A non-influencing belt drive isused to minimize cyclic errors
Data logging to 0.25µm (10µin)assures high resolution andrepeatability
The Form Talysurf traverse unitserves as an absolutely accuratereference for reproduction ofthe measured surface.
component performance will be affected by form, waviness and roughness
deviations in form may cause excessive noiseor premature failure of the component
What is roughness?
Roughness is produced bythe action of the cutting toolor machining process usuallyresulting in process marks.
Function of a component - sliding, sealing, rotating, etc. - dictates what amount ofroughness is necessary forcorrect performance.
Cosmetic appearance or secondary operations such aspainting and plating can alsobe important in choosing aroughness specification.
Cutting tool geometery alongwith machine tool settingssuch as feed rate, depth ofcut and speed influenceroughness as follows:
• Amplitude - vertical distancebetween peaks and valleys
• Spacing - horizontal distance between peaks and valleys
• Slope - sharpness of individual peaks and valleys
Roughness is a deliberate, controllable element of component design and isalways superimposed on thewaviness element.
◗
◗
◗
◗
◗
6
Calibration of the systemJust as the three elements of a surface function as one, each component of a measuring instrument is designed tocomplement the others. The specification of one component - no matter how outstanding - is meaningless out of contextwith the system. Form Talysurf optimizes system performance by means of calibration over a spherical artifact.
The calibration procedure
Like most instruments of thistype, the Form Talysurf stylusmoves in an arcuate manner.A method to linearize datameasured in this way waspioneered by Taylor Hobson.
With this method a polynomialis applied to the readings fromthe gauge. The coefficients ofthe polynomial are determinedby means of calibration.
The accuracy of this calibrationdirectly affects the accuracyof radius, form and surfacetexture measurement.
To obtain these coefficients,Form Talysurf instrumentsare typically calibratedthrough the measurementof a high precision sphericalartifact - a method of calibrationpatented by Taylor Hobson.
Checking the stylus tip
With many surface measuringsystems, the size, shape andcondition of the stylus tip areassumed to be constant interms of data processing.
In practice the stylus tip mayvary due to manufacturingtolerance, routine wear orphysical damage.
With Form Talysurf the stylus istraversed over the sphericalartifact making contact at allpoints along the radius ofthe tip in the measurementdirection.
By measuring over a sphericalcalibration artifact, the usercan detect effects due to stylusdamage and deviations of sizeand shape.
Checking the gauge range
All Taylor Hobson gauges havean exceptional ratio between themaximum vertical displacement(range) and the minimum verticalstep (resolution).
65,536:1 is the range to resolutionratio for the Inductive gaugewhich has 1mm (0.04in) rangeand is calibrated over a 12.5mm(0.49in) radius.
780,000:1 is the ratio for thePhase Grating Interferometer(PGI) gauge which has 10mm(0.4in) range and is calibratedover an 80mm (3.15in) radius.
12,480,000:1 is the ratio for thePGI Plus gauge which has 10mm(0.4in) range with 0.8nm (0.03µin)resolution and is calibrated overan 80mm (3.15in) radius.
The combination of range, highresolution and calibration over a spherical artifact assures flexibility and accuracy for manycommon as well as special measuring situations:
Inclination and straightness canbe evaluated over longer distances
Multiple steps on a componentcan be measured at once
Leveling of components prior tomeasurement is often unnecessary
Curved or contoured surfaces can be easily measured
◗
◗
◗
◗
Radius
Distance
Angle
Linearity and wide range assure accurate measurement of dimension, form and texture
Form Talysurf Series 2
7
Checking the gauge linearity
The more linear a system is the more likely that stylusmovement at the bottom of the range is reproduced exactlythe same as movement at thetop of the range and anywherein between.
Step height artifacts are widelyused for calibration of systemsnot intended for form analysis.In this simple process a narrowband in the middle of the gaugerange is checked and calibrated.
With Form Talysurf the entiregauge range is tested as thestylus is traversed over thespherical artifact. This assureslinearity of the entire measuringrange regardless of the tiltingdirection of the componentbeing measured.
Processor functions
Form Talysurf uses powerfulsoftware to combine data generated by vertical movementof the stylus with data collectedfrom the linear scale andreading head in the horizontaltraverse unit. The result is a grid array of as many as120,000 data points, each withunique spatial characteristics.
Arcuate stylus motion error
Patented algorithms are appliedthat compensate for arcuatestylus motion error. This erroroccurs because data is collectedin X-Z coordinates even thoughthe stylus arm is moving in an arc.
Automatic and powerful
Calibration is programmableand essentially automatic.A positioning stage is used tomanually locate the crest of the ball in the 'Y' axis. Crestingin the 'X' axis, movement of thetraverse to its start position andthe actual measurement are all automatic.
The result is a true systemcalibration - all elements havebeen checked:
• Arcuate stylus motion error
• Gauge non-linearity
• Stylus tip geometry
• Instrument stability
• Traverse datum and data logging
• Gauge / stylus mechanical stiffness
• Processor functions
measure dimension, form and texture at once witha single traverse over curved surfaces
calibration over a ball checks gauge range, linearity,stylus condition and processor functions
measureable form features may be spherical,aspherical, concave, convex, internal or external
8
Choosing the right productForm Talysurf instruments can be provided with either of two types of standard gauge.A wide selection of interchangeable styli is available for both.
Inductive Pick-up Stylus Arms
Standard Stylus Arm - Code 112/2009
Recess Stylus Arm - Code 112/2011
Small Bore Stylus Arm - Code 112/2012
Chisel Edge Stylus Arm - 2µm x 750µm chisel diamond stylus - Code 112/2013
Ball Stylus Arm, nominal range 2mm (0.078in) 500µm radius sapphire ball stylus - Code 112/2010
57.5mm
57.5mm
8.3mm
57.5mm
117.5mm
16.5mm
14.7mm
1.2mm
9.0mm
Note: All stylus arms have 90˚ conisphere diamond styli with2µm (80µin) nominal radius tips unless otherwise stated; for specialized surfaces other styli are available.
Additional stylus armsThe stylus arms shown on these pages represent just some ofthe standard configurations. In addition, Taylor Hobson canprovide customized stylus arms for specific applications.
Inductive gauge
This traditional gauge head leads the industry with afull 1mm (0.04in) of range and an outstanding range toresolution ratio of 65,536:1. It has a pivoted and balancedbeam to allow measurement in any attitude.
Range / Resolution
1.0mm / 16nm (0.04in / 0.64µin)0.2mm / 3.0nm (0.008in / 0.12µin)0.04mm / 0.6nm (0.002in / 0.02µin)
Right angle attachment -Code 112/2022 (Skidless applications)Code 112/2040 (Skid applications)
The right angle attachment supports the pick-up atright angles to the traverse unit.
Stylus stop attachment - Code 112/2098
For use when measuring interrupted surfaces, thisattachment stops the stylus falling into the interrupt to prevent damage to the stylus tip.
Wide range pick-up - Code 112/2628
Available as a plug-in accessory, the wide range pick-upprovides 28mm (1.1in) of range with 426nm (17µin) resolution. Suitable for form and contour measurements.
Three interchangeable stylus arms are provided:
• Conical tip with 30º included angle• Ball tip with 0.5mm (0.02in) radius• Chisel tip with 15º included angle
57.5mm
Form Talysurf Series 2
9
Phase Grating Interferometer (PGI)
Since the very first Talysurf was introduced in 1941, a Taylor Hobson instrument has always been thebenchmark for the surface finish industry. Form Talysurf PGI continues the tradition.
Phase Grating Interferometry via a cylindrical grating is superior in every way to linear displacement gauges,making possible the accurate measurement of surfacefinish, form, radius, inclination and contour in a singletraverse.
• 10mm range is seamless, not small increments stitched together via software
• Output proportional only to rotation angle of arm - independent of laser frequency
• Stylus force change is less than 5%
• Gauge force is uniform in any attitude for inverted measurements
• 20mm (0.8in) gauge range available with double length stylus arms (resolution will also be doubled)
Range / Resolution
PGI (Standard)
Range 10mm (0.4in) Resolution 12.8nm (0.5µin) Ratio 780,000:1
PGI Plus
Range 10mm (0.4in) Resolution 0.8nm (0.03µin) Ratio 12,480,000:1
Stylus stop attachment - Code 112/2701
For use when measuring interrupted surfaces, thisattachment stops the stylus falling into the interrupt to prevent damage to the stylus tip.
PGI Pick-up Stylus Arms
Standard Stylus Arm - Code 112/2619
Small Bore Stylus Arm - Code 112/2622
Miniature Bore Stylus Arm - Code 112/2623
Recess Stylus Arm - Code 112/2624
Ball Stylus Arm 120mm, nominal range 20mm (0.8in)500µm sapphire ball stylus - Code 112/2620
60.0mm
60.0mm
60.0mm
14.5mm
120mm
27.8mm
1.9mm
1.2mm
60.0mm
28.7mm
396mm (15.6in)
195mm (7.7in)
10
Choosing the right productAll Form Talysurf traverse units support programmed operation and are suitable for dimension, form and texture measurement.
Product System Horizontal Vertical Base / Column OverallCode type Traverse Traverse (Length x Width x Height) Weight
M112/2593 Inductive 50mm (1.97in) Free standing Free Standing 7.5kg (17lbs)M112/2592 Inductive 120mm (4.72in) Free standing Free Standing 11.5kg (25lbs)M112/2811 Inductive 50mm (1.97in) 450mm (17.7in) 760 x 500 x755mm (30 x 20 x 30in) 175kg (385lbs)M112/2812 Inductive 50mm (1.97in) 700mm (27.6in) 760 x 500 x1005mm (30 x 20 x 40in) 181kg (398lbs)M112/2814 Inductive 120mm (4.72in) 450mm (17.7in) 760 x 500 x755mm (30 x 20 x 30in) 179kg (394lbs)M112/2815 Inductive 120mm (4.72in) 700mm (27.6in) 760 x 500 x1005mm (30 x 20 x 40in) 185kg (407lbs)M112/2563 PGI 120mm (4.72in) 450mm (17.7in) 760 x 500 x755mm (30 x 20 x 30in) 179kg (394lbs)M112/2813 PGI 120mm (4.72in) 700mm (27.6in) 760 x 500 x1005mm (30 x 20 x 40in) 185kg (407lbs)M112/3207 Super Finish 120mm (4.72in) 450mm (17.7in) 760 x 500 x755mm (30 x 20 x 30in) 179kg (394lbs)M112/3260 Super Finish 120mm (4.72in) 700mm (27.6in) 760 x 500 x1005mm (30 x 20 x 40in) 185kg (407lbs)
Standard system configurations. All systems include PC and standard operating software.
Excellent performance is assured thanks to:
• Absolute positional control• Non-influencing belt drive• High accuracy straightness• Data logging to 0.25µm (10µin)
Inductive traverse units
Either a 50mm (1.97in) or 120mm (4.72in) traverselength can be provided. Both are available as freestanding units if the measuring stand isn’t required.
PGI traverse units
All PGI units have 120mm (4.72in) traverselength. The standard PGI system is suitable formost wide range, high accuracy applications.
Super Finish Measuring System
Designed specifically for the highest level of manufacturing precision, this system offers:
• PGI Plus gauge• Exceptionally low system noise• 10mm (0.4in) range• 0.8nm (0.03µin) resolution
125mm (4.9in)
374mm (14.7in)
50mm Inductive traverse unit
120mm Inductive or PGI traverse unit
Aspheric Measurement System
For optical applications, a high performance version of the PGI Plus is available. Improved datum straightness provides form error measurements repeatable to a fraction of the wavelength of light and an isolation chamberis included to reduce adverse environmental influences.
Form Talysurf Series 2
11
Measuring stations
Epoxy granite construction
Both the column and the base are made of this uniquematerial which suppresses ambient noise and vibration.
• High damping characteristics• Large thermal inertia
Large base
This massive base isolates the instrument from vibrationand offers plenty of room for staging large components.Two tee slots, parallel to each other within 0.3mm (0.01in),are provided for precise mounting of accessories.
Motorized, programmable column
The column has fully motorized vertical and tiltingmovements for programmability and total automation.
• Absolute positional control - servo controlled motor drive and encoder for up/down movementsis programmable for batch inspection. Maximum positioning speed is 10mm/second (0.4in/second)
• Tilt control (+/- 9º range) - allows the traverse unit to be automatically adjusted parallel to inclined surfaces
• "Stop on contact" - automatically advances the stylus to the workpiece and stops on contact centered in the middle of the gauge range
Steel support frame Code 112/3101
Welded steel frame for rigid support of graniteinstrument base and motorized column; includesstatic vibration isolation pads.(standard with all PGI systems)
Anti-Vibration system Code 112/3110
Set of (4) pneumatic isolation pads for use with thesteel support frame to reduce measurement noisein shop environments.(standard with all PGI Plus systems)
motorized column and base shown with steel support frame(traverse unit is shown inclined via motorized tilting function)
detail of anti-vibration pad
12
µltra Softwareµltra was developed first of all to function in accordance with the highest standards of metrology. That it turned out also to be clever, comprehensive and easy-to-use reflects the Taylor Hobson expertise at putting metrology to work in support of manufacturing.
Total system control
µltra takes charge of all functions to eliminate hardware / software conflictstypically created by third partyor after market softwarepackages. Mechanical performance is optimizedby use of patented software routines and proprietarycalibration techniques.
• Mechanical functions -positioning and speed of all axis movements
• Administrative functions -user preferences, data storage and retrieval
• Analysis functions -application of filters and constants, calculation of results
• Display functions - screen graphics, customized templates, print commands
Compatibility
µltra was designed to be fullycompatible with older TaylorHobson data file formats,thus enabling re-analysisand comparison of old data. It also has a programmablefacility for the simple export ofresults to standard packagessuch as SPC and ExcelTM.
Compliance with international standards
Whatever the parameter andwherever in the world it happensto be measured it is guaranteedto be correct. µltra alsoadheres to industrial metrologydisciplines as practiced byleading manufacturers aroundthe globe.
• Calibration routines areeasily integrated intocorporate ISO 9001procedures
• Artifacts used for calibrationcan be identified andreferenced to certification date
• Calibration history regarding operator, artifact and dateis automatically stored
• Calibration is recommendedwhenever the stylus arm is changed. To simplify this process all stylus armconfiguration dimensions are stored for easy recall
Industrial strength interface
Although written withfamiliar Windows conventions,µltra has the look and feel of a machine tool interface.Commands are direct, purposeful and driven byintuitive logic. Perhaps forthe first time in metrology the computer is a bridgeinstead of a barrier betweenoperator and instrument.
µltra powers Talycontour dimensional contour measuring systems
µltra powers Talyrond roundness and cylindricity measuring systems
µltra simplifies training and eliminates the need for dedicated, single system operators
Form Talysurf Series 2
13
Multi-instrument architecture
µltra takes full advantage ofclient/server technology andis designed to drive all TaylorHobson hardware devicesincluding Form TalysurfSeries instruments andTalyrond roundness systems.
• Operators familiar with µltra can easily operate multiple instruments
• No need for dedicated, single instrument operators
• Transfer of knowledge is simplified when operatorsare promoted or transferred
• Network ready for central data storage and output to network printers
Comprehensive analysis
µltra includes as standardeverything important to themeasurement of surface finish. All the basic roughnessand waviness parametersare here along with advancedanalysis tools that are eitherstandard or optional dependingon system configuration.
• Contour analysis
• Dual profile
• Aspheric form
• Feature exclusion tool
• Feature zoom tool
• Form analysis
• Point to point distance
• Radius measurement
• Angle measurement
Automation for consistencyand safety
Saving time is just one benefitof automation. Horizontal,vertical and tilting movementsare programmable to provideconsistent start positioning.Minimizing operator interventionalso minimizes damagecaused by mishandling.
• Automatic start positioning -location of the stylus on thecomponent is repeatable and correct
• Automatic measuring runs -every step is performed in the right sequence inthe right location
• Automatic analysis routines -filters, evaluation methodsand parameters arealways identical
automation safely positions the stylus withhorizontal, vertical and tilting movements
start and stop positions are programmable toprevent damage to the stylus
multiple locations on a component can bemeasured within an automatic routine
14
µltra Surface Finish software - at work on a typical componentTo illustrate the effectiveness with which µltra can analyze all elements ofsurface texture simultaneously, a manufactured component with curved,straight and inclined features will be measured with a single traverse.
In figure 1. the elements markedin pink have been excluded. An LSLine form fit analysis is applied tothe remaining sections to determinetotal profile deviation (Pt).
In figure 2. the "curtains" areclosed on all but one arcuatesection of the profile which consists of approximately 15,000horizontal data points.
The result is initially displayed as a raw profile consisting of approximately 100,000 horizontal data points. µltra provides two tools for isolating features of the component for detailed analysis. The exclusion method is used when multiple sections are considered and the zoom method is used for individual profile elements.
raw profile
measuring path for raw profile
Figure 1.
Figure 2.
Form Talysurf Series 2
15
Dimension, Form, Roughness and Waviness AnalysisAlthough µltra can be provided without Form Analysis this powerful featureis recommended whenever a component has curved or inclined features orotherwise deviates from a straight line. The true functional shape of elements can be examined by means of geometric references such as:
• Least Squares Arc • Least Squares Line • Minimum Zone Line
In figure 3. errors of form along the radius are shown clearly. A perfect sphere would appear as a straight line and the Pt valuewould approach zero.
In figure 4. the roughness alongthe radius is displayed at highmagnification. Typical roughness parameters have been calculatedusing conventional filters.
Figure 3.
Figure 4.
zoom section of radius
detail of radius shown in zoom section
Both radius and, significantly, deviation from true radius can be analyzed at once via removal of the LS Arc.After removal of the LS Arc, conventional filters can be applied to determine roughness, waviness, material ratio and other surface finish parameters. µltra provides more than 95 different parameters.
16
Inclination and alignmentA significant advantage of wide gauge range is in staging of the component to be measured. With either the inductive gauge (1mm range) or the PGI gauge (10mm range), simply position the component so that all features to be measured are within the gauging range.
As the stylus moves up and down, the integrity of the data is assured because linearity overthe entire range has been considered in the calibration process. µltra software handles themanipulation and analysis of the data quickly and easily.
In figure 5. waviness parameterson the horizontal surface have beencalculated using conventional filters.The inclined surface may also beassessed independently.
In figure 6. roughness parameterson the inclined surface have beencalculated using conventional filters.The horizontal surface may also beassessed independently.
Figure 5.
Figure 6.
zoom section of inclined surface
detail of inclined surface shown in zoom section
In this example the zoom method has been used to isolate the inclined feature of the component. In addition, thefeature has been aligned to horizontal and can now be used as a reference datum for point-to-point distancemeasurements and determination of surface tilt, intercept and pitch.
17
Form Talysurf Series 2
Form AnalysisSoftware(standard with PGI systemsoptional with inductive)
Form Analysis Software Code 112/2845-01
Form error: calculated with reference to a best fit concaveor convex circular arc orstraight line, including allsurface roughness detail.Alternatively with reference to a minimum zone (which isthe minimum separationbetween two parallel linescontaining the data set).
Radius: using a least squaresbest fit, the radius of concaveor convex circular arcs can be automatically calculatedfrom selected data. The optionto exclude unwanted surfacefeatures such as edges isalso available. Alternatively,the absolute radius can beset to analyse the actualdeviation from a design master.Other calculated parametersinclude the center co-ordinateand pitch.
Angle (slope): using a straightline or minimum zone algorithm,surface tilt can be determinedand removed prior to parameteranalysis. Other calculated valuesinclude intercept and pitch.
Dimension: the linear relationshipof surface features can beassessed and compared, due to the ability to calculate trueX and Z co-ordinate positions.
Surface FinishParameters(Standard with all systems)
DimensionDatum slopeDelta slopeIntercept X / Intercept ZSlope
Primary parametersPa, Pc, Pda, Pdc*, Pdq, PHSC*,Pku, Pln, Plo, Plq, Pmr(c)*,Pmr*, Pp, PPc*, Pq, PS, Psk,Psm, Pt, Pv, Pvo*, Pz, Pz(JIS)
Roughness parametersR3y, R3z, Ra, Rc, Rda, Rdc*,Rdq, RHSC*, Rku, Rln, Rlo,Rlq, Rmr(c)*, Rmr*, Rp,Rp1max, Rpc*, Rq, RS, Rsk,RSm, Rt, Rv, Rvo*, Rv1max,Rz, Rz(DIN), Rz(JIS), Rz1max
Rk ParametersA1, A2, Mr1, Mr2, Rk, Rpk, Rvk
user customized layout
Waviness parametersWa, Wc, Wda, Wdc*, Wdq, WHSC*,Wku, Wln, Wlo, Wlq, Wmr(c)*,Wmr*, Wp, WPc*, Wq, WS, Wsk,Wsm, Wt, Wv, Wvo*, Wz
R + W ParametersAR, AW, Pt, R, Rke, Rpke, Rvke,Rx, Sar, Saw, Sr, Sw, W, Wte, Wx
Pass / Fail tolerancesAll parameters can be assigned nominal, minimumand maximum values.
* QualifiersAll parameters marked with anasterisk are suitable for userassigned single or multiplequalifiers. For example, materialratio (mr) may be assessed atone or more slice levels withina single measurement.
Note: Where applicable, the aboveparameters conform to and arenamed as per ISO standards, 4287-1997, 13565-1-2 and 12085.
118
Aspheric Form Software code 112/2843
Assessments of form error, surface slope error andtilt in comparison with operator defined design data.An aspheric, defined in the form of a polynomialexpression, is best fitted to the measured profile. After form removal the residuals are calculatedand the following parameters can be determined: Fig, Ra, Rt, Smn, Smx, Tilt, Xp, Xt and Xv.
Conic Form Software code 112/2844
Assessment of residual errors after removal of best fit elliptical or hyperbolic forms to provide major and minor axis values, tilt, and residual surface texture analysis.
Contour Analysis code 112/3170
Provides dimensional analysis of geometric featuressuch as radii, angles, length and height. Includesuser programmed measurement macros, individualfeature tolerancing, comparison of DXF files to contourand fitting of geometric elements to unknown contour.
Dual Profile code 112/2846
Enables two sets of measurement data to be displayedat once with one set being used as the datum againstwhich the other set is tested. Comparison can be ofone measured profile to another or to a master profilewhich has been saved as a template. A “difference”profile can be displayed at the touch of a button andused for further analysis.
Gothic Arch Analysis code 112/3121
Of particular benefit to bearing producers, the GothicArch tool electronically fits the nominal bearingdiameter into the raceway profile and the parameters(radius, radius offset, vertex angle and ball clearance)are automatically calculated for on-screen displayor colour printout.
contour analysis software
Nominal Ball Diameter
Gothic Arch Parameters
Al Ar
Bearing Race
Zr Zl
Xr Xl
Rl Rr
Hc
X = Offset (Horiz)Z = Offset (Vert)R = RadiusA = Vertex AngleHc = Clearance
l = Left Arc r = Right Arc
gothic arch software
dual profile software
Form Talysurf software options
Form Talysurf Series 2
119
example of inverted surface and volume calculation
3D Topography Measurement
Additional hardware and software make the third dimension of surface metrology easily accessiblefor Form Talysurf systems.
Data for 3D analysis is collected by data logging a number of parallel profiles at pre-determinedspacing using the Y-Axis translation stage.
Talymap 3D Topography Software
Basic code B112/2818Expert code B112/2819Universal code B112/2820.
Talymap software is suitable for simple checks orresearch level analysis.
Data manipulation tools include:
• Leveling by least squares plane• Form removal by cylinder, sphere or polynomial• Defect and flaw removal
Data analysis tools include:
• Dimensional measurement in X, Y and Z axes• 3D and 2D parameters • Volume and area parameters
Data presentation tools include:
• User defined viewing angle and rotation• Zoom function in 3D and 2D• 3D color and monochrome photo simulation
Y-Axis Translation Stage code 112/3178
The motor driven Y-axis stage ensures accurate andrepeatable spacing for data logging parallel profilesof a component. Total travel is 100mm (3.94in) with1µm (40µin) step resolution. Mounting of the stage isvia tee slots in the Form Talysurf granite base.
Special applications
Form Talysurf traverse units and motorized columnsare readily adapted to customized workholding fixturesfor special applications. For example, to measureextremely large or complex components or to simplifyinspection in high production areas.
motorized Y - axis stage
example of zoom function and profile extraction
20
1 Universal WorktableComplete stage assemblyto provide X, Y, Z, rotary andtilting positioning moves.Includes vee block and locationplate for mounting to the teeslot in the granite base.code 112/3064
Stage & Vee Plate AssemblySimple stage assembly with Y axis positioning, vee blockand location plate for mountingin the granite base.code 112/3067
Stage AssemblySimple stage assembly withY axis positioning and locationplate for mounting in the granite base.code 112/3163
Manual column and baseFor use with 50mm inductivetraverse units to provide aneconomical alternative to the motorized column whenautomation is not necessaryor desired.code 112/3117
2 Ball Joint ViseProvides universal positioningvia 360º rotation and 180º tilt;especially for lightweight orsmall componentscode 112/2685
3 Adjustable WorktableProvides fine adjustment forrotational [+/- 3º] and lateral[+/-10mm (0.4in)] positioningof the workpiece. Work surfacewith T-slot = 120mm x 120mm(4.7in x 4.7in) code 112/1644
4 Adjustable Vee BlockLateral adjustment of 40mm(1.5in) assists in bringing thecrest of a cylindrical workpiecedirectly under the stylus.Length = 90mm (3.5in)code 112/1326
5 Vee Blocks (Pair)For the support of large,cylindrical componentscode 112/1645
Leveling StageProvides 3 degrees tiltingadjustment to bring workpieceparallel with the traverse unit.Work surface 150mm length x75mm width (5.9in x 2.95in) code 112/3159
6 Y Axis TableProvides 10mm (0.4in) adjustmentof the workpiece with loadcapacity of 20kg (44lb). Can be used with Adjustable VeeBlock [112/1326] to position a cylindrical workpiece at rightangle to the pick-up traverse.Work surface with T-slots =200mm x 200mm (7.9in x 7.9in)code 112/1826
Traverse Unit Tilt DeviceFor use with inductive traverseunits and motorized stands.Provides 0, 15, 30, and 45ºpositions to supplement +/- 5ºmotorized tilting.code 112/2060
Manual Rotation StageProvides rotary positioning.Mounting plate not included.code 112/3164
Accessories All the accessories you need to begin using Form Talysurf Series 2 are supplied as standard. However, for moredemanding measuring requirements, we have a range of accessories which may be ordered separately.
1
2
3 4
5 6
21
Form Talysurf Series 2
9
7 Large Computer Desk1260mm wide x 850mm deep x750mm high (49.6" x 33.5"x 29.5").Locking cabinet can be assembledto left or right of the desk. code 112/2998
8 Storage Unit 820mm wide x 625mm deep x640mm high (32.3" x 24.6" x25.2"). Designed to fit under thesmall computer desk. Featureslockable doors and is mountedon castors for easy installation.code 112/3142
9 Small Computer Desk900mm wide x 850mm deep x 750mm high (35.5" x 33.5" x 29.5"). A small drawer isprovided for tools, styli, etc.code 112/3144
Steel Support Frame750mm wide x 500mm deep x 800mm high (29.5" x 19.7" x31.5"). Welded steel frame forrigid support of granite baseand motorized column. (Photo on page 11)code 112/3101
Surround Desk900mm wide x 850mm deep x750mm high (35.4" x 33.5" x29.5"). Used with the steelsupport frame to provide awork area isolated from thegranite base.(Photo on page 3)code 112/3143
Anti-Vibration SystemSet of (4) pneumatic isolationpads for use with the steelsupport frame to reducemeasurement noise in shopenvironments.(Photo on page 11)code 112/3110
7
11
10
12
8
Video MagnifierColor vision system with up to75X magnification integratesfully with µltra software toassist with inspection of smallcomponents. Includes optics,CCD camera, transformer,magnetic base and software.code 112/3167
10 Ra and 3 Line Standard An Ra verification patch withstep height standard can besupplied with a Form Talysurfunit for calibration when surfacetexture only is to be analysed.code 112/557.
11 Radius CalibrationStandardFor systems using formsoftware, spherical calibration artifacts are a requirement.
80mm (3.15in) RadiusA glass artifact for 120mm systems using either the PGIgauge or wide range pick-up.code 112/2028
22mm (0.86in) RadiusA mounted precision ball for50mm and 120mm systemsusing long stylus arms.code 112/1844 (pictured)
12.5mm (0.49in) RadiusA mounted precision ball for50mm and 120mm systemsusing standard stylus arms. code 112/2062
12 Ball and Roller UnitSpecial fixture rotates ball orroller over stationary stylus for circumferential inspection ofsurface finish. Includes setof (4) plates for ball diameters1 - 25mm (0.04 - 0.98in)code 112/3219
Roller PlatesSet of (3) for 1 - 16mm (0.04 - 0.63in) diameter rollerscode 112/3248
Environment (applies to both PGI and Inductive systems)
Storage temperature 5ºC to 40ºC (41ºF to 104ºF)Storage humidity 10% to 80% Relative, non condensing.
Operating temperature:Inductive systems 15ºC to 300C (59ºF to 86ºF)PGI systems 18ºC to 22ºC (64ºF to 72ºF)
Temperature gradient <2ºC (<3.60F) per hour
Operating humidity:Inductive systems 10% to 80% Relative, non condensing.PGI systems 45% to 75% Relative, non condensing.
Maximum RMS 3um/s (120uin/s) at <50Hzfloor vibration 6um/s (240uin/s) at >50Hz
Electrical supply (applies to both PGI and Inductive systems)
Supply type Alternating supply, singlephase with earth (3-wire system)
Instrument and 90V - 130V or 200V-260Vcomputer voltage (switch selectable)
Frequency 47Hz to 63Hz
Supply voltage Not less than 2µs and not greater than 20µstransients - width
Power consumption 150VA
Safety EN 61010 - 1 : 2001EMC EN61000 - 6 - 4 : 2001
EN61000 - 6 - 1 : 2001
120mm / 0.1mm (4.72in / 0.004in)
10mm/s (0.39in/s) max -- 0.5mm/s & 1mm/s (0.02in/s & 0.04in/s)
0.25µm [0.5 to 30mm traverse length] (10µin [0.02in to1.18in] )1µm [30mm to 120mm traverse length] (40µin [1.18in to 4.72in] )
(0.06 + 0.0037 X [mm] ) µm(2.4 + 3.7 X [inches] ) µin
(0.3 + 0.03 X [mm] ) µm (11.8 + 30 X [inches] ) µin
10mm [60mm stylus arm] (0.39in [2.36in] ) 20mm [120mm stylus arm] (0.79in [4.72in] ) 25mm [150mm stylus arm] (0.98in [5.90in] )
0.8nm @10mm range 12.8nm @10mm range(0.03µin @ 0.39in) range (0.5µin @ 0.39in) range
12,480,000 : 1 780,000 : 1
60mm arm, 2µm radius conisphere diamond stylus, 1mN force120mm arm, 0.5mm radius ball, 20mN force - optional
(0.07 + 0.03 Z [mm] ) µm (3 + 30 Z [inches] ) µin - after calibration 5
Flat surface - typically 0.05um (2µin) 6 -- Curved surface - typically 0.10µm (4µin) 7
80mm (3.15in) nominal radius glass standard[5µm (197µin) ]
0.2µm [60mm stylus arm] (8µin [2.36in] )0.4µm [120mm stylus arm] (16µin [4.72in] )
4nm (0.16µin) 8nm (0.32µin)
2% + 4nm (0.16µin) height parameters only
0.1 - 80mm (0.004 - 3.15in) = 1 - 0.005% of nominal80 - 1000mm (3.15 - 39.4in) = 0.005 - 0.1% of nominal
1000 - 2000mm (39.4 - 78.7in) = 0.1% of nominal
0.5 arc minute uncertainty (+ / - 35º maximum range)
N/A
396 x 127 x 195mm (15.6 x 5 x 7.7in)
11.5Kg (25lbs)
22
Specification
Traverse length - X Max / Min
Traverse speeds -- Measuring speeds nominal 1
Data sampling interval in X
Straightness uncertainty (Pt) - (X = length) 2
X axis indication uncertainty (X = length) 3
Nominal measuring range (Z)
Resolution (Z) 4
Range to resolution ratio
Stylus arm length, tip size, force
Z axis non-linearity, (Z = gauge displacement)
Repeatability of Z axis indication
Standard spherical calibration artifact, [calibrated radius uncertainty]
Calibration uncertainty - Pt 8
System noise - Rq 9
Surface texture parameter uncertainty
Radius measurement uncertainty 10
Inclination measurement uncertainty
Change in radius due to temperature
Dimensions L x D x H (traverse unit)
Weight (traverse unit)
Vertical Performance PGI Plus PGI Standard
System Performance PGI Plus PGI Standard
Horizontal Performance PGI Plus PGI Standard
120mm / 0.1mm (4.72in / 0.004in) 50mm / 0.1mm (1.97in / 0.004in)
10mm/s (0.39in/s) max -- 0.5mm/s & 1mm/s (0.02in/s & 0.04in/s)
0.25µm [0.5 to 30mm traverse length] (10µin [0.02in to1.18in] ) 1µm [30mm to 120mm traverse length] (40µin [1.18in to 4.72in] )
(0.06 + 0.0037 X[mm] )µm Column (0.06 + 0.007 X [mm] )µm(2.4 + 3.7 X [inches] )µin mounted (2.4 + 7 X [inches] )µin
(0.12 + 0.0074 X[mm] )µm Free (0.06 + 0.007 X[mm] )µm(4.8 + 7.4 X [inches] )µin standing (2.4 + 7 X [inches] )µin
(0.3 + 0.03 X [mm] ) µm (11.8 + 30 X [inches] ) µin
1mm [60mm stylus arm] (0.04in [2.36in] ) 2mm [120mm stylus arm] (0.08in [4.72in] )
16nm @ 1mm range (0.63µin @ 0.039in)3nm @ 0.2mm range (0.12µin @ 0.008in)
0.6nm @ 0.04mm range (0.024µin @ 0.0016in)
65,536 : 1
60mm arm, 2µm radius conisphere diamond stylus, 1mN force120mm arm, 0.5mm radius ball, 20mN force - optional
(0.1 + 0.05 Z [mm] ) µm (4 + 50 Z [inches] ) µin - after calibration 5
Flat surface - typically 0.05um (2µin) 6 -- Curved surface - typically 0.10µm (4µin) 7
1mm range - 12.5mm (0.49in) nominal radius ball standard [0.4um (15.7µin)]2mm range - 22mm (0.87in) nominal radius ball standard [0.4um (15.7µin)]
0.25um [60mm stylus arm] (10µin [2.36in] ) 0.5um [120mm stylus] (20µin [4.72in] )
column mounted 10nm (0.4µin) column mounted 15nm (0.6µin)free standing 15nm (0.6µin) free standing 15nm (0.6µin)
2% + 4nm (0.16µin) Peak parameters only
0.1 - 12.5mm (0.004 - 0.49in = 1 - 0.02% of nominal12.5 - 25mm (0.49 - 0.98in) = 0.02% of nominal
25 - 1000mm (0.98 - 39.4in) = 0.02 to 0.1% of nominal
0.5 arc minute uncertainty (+ / - 35º maximum range)
4µm / ºC on a 12.5mm radius (88µin / ºF on a 0.5in radius)
396 x 127 x 195mm (15.6 x 5 x 7.7in) 374 x 114 x 125mm (14.7 x 4.5 x 4.9in)
11.5Kg (25lbs) 7.5Kg (16.5lbs)
Vertical Performance Inductive 120 Inductive 50
Traverse length - X Max / Min
Traverse speeds -- Measuring speeds nominal 1
Data sampling interval in X
Straightness uncertainty (Pt) - (X = length) 2
X axis indication uncertainty (X = length) 3
Nominal measuring range (Z)
Resolution (Z) 4
Range to resolution ratio
Stylus arm length, tip size, force
Z axis non-linearity, (Z = gauge displacement)
Repeatability of Z axis indication
Standard spherical calibration artifact, [calibrated radius uncertainty]
Calibration uncertainty - Pt 8
System noise - Rq 9
Surface texture parameter uncertainty
Radius measurement uncertainty 10
Inclination measurement uncertainty
Change in radius due to temperature
Dimensions L x D x H (traverse unit)
Weight (traverse unit)
Form Talysurf Series 2
23
System Performance Inductive 120 Inductive 50
The above quoted technical data is for measurementstaken in a metrology laboratory controlled environment:20ºC ± 1ºC (68ºF ± 1.8ºF), draft free, and isolatedfrom low frequency floor borne vibration.
Quoted uncertainties are at 95% confidence inaccordance with recommendations in the ISO Guide to the expression of uncertainty inmeasurement (GUM: 1993)
NOTE:Taylor Hobson pursues a policy of continualimprovement due to technical developments. We therefore reserve the right to deviate from catalog specifications.
1 0.5mm/s (0.02in/s) speed is recommended for surface texture measurements.
2 Using a 60mm arm with a diamond stylus and analysis using a primary filter setting of λs = 2.5mm.
3 Using a 60mm arm with a diamond stylus.
4 Using a 60mm arm with a diamond stylus. (Inductive systems using standard gaugecode number 112-2564.)
5 Measurements up and down a 35º angled slope over 80% of the gauge range, using a 60mm arm with a diamond stylus.
6 Repeated measurements over a glass flat that is nominally parallel to the datum, 10mm traverse length, analysis using a Primary filter λs=0.025mm.
7 Repeated measurements over an 80mm radius glass standard, analysis using a Primary filter λs=0.25mm.
8 Analysis using a primary filter λs=0.025mm.
9 Using a 60mm arm with a diamond stylus, measuring a glass flat that is nominally parallel to the datum, analysis using a Gaussian roughness filter, 0.08mm cut off, 30:1 bandwidth.
10 Assumes a calibration artifact of perfect radius.
Horizontal Performance Inductive 120 Inductive 50
FTSS2 1E CP 05/02
Taylor Hobson SA6 avenue de Norvège, Hightec 4
91953 Courtaboeuf Cedex, FranceTel: +33 160 92 14 14 Fax: +33 160 92 10 20
e-mail: contact@taylor-hobson.fr
Taylor Hobson GmbHPostfach 4827, Kreuzberger Ring 6
65205 Wiesbaden, GermanyTel: +49 611 973040 Fax: +49 611 97304600
e-mail: info@taylor-hobson.de
Taylor Hobson S.p.A.S.p. 28 Vigentina 6,
20090 Opera, Milan, ItalyTel: +39 0257 606424 Fax: +39 0257 606740
e-mail: taylor.hobson@libero.it
Taylor Hobson Liaison OfficeAustria and Eastern Europe
Amalienstrasse 68, A-1130 Vienna, AustriaTel: +43 1877 557112 Fax: +43 1877 557116
e-mail: thp@vienna.at
Taylor Hobson KKNo 31 Kowa Building 19-1, 3-Chome, Shiroganedai
Minato-Ku, Tokyo 108-0071, JapanTel: +81 33473 7001 Fax: +81 33473 7002
e-mail: mail-box@taylor-hobson.co.jp
Taylor Hobson K INCHungkuk Life Building. 5th Floor 6-7, Soonae Dong
Pundang-Ku, Seongnam, Kyungki-Do, 463-020, KoreaTel: +82 31 713 1371 Fax: +82 31 713 1372
e-mail: thkorea@kornet.net
Taylor Hobson China Office20/F, Delta House, 3 On Yiu Street
Shatin, New Territories, Hong KongTel: +852 2757 3033 Fax: +852 2757 1767
e-mail: talhobhk@netvigator.com
Taylor Hobson IncSuite 350, 2100 Golf Road, Rolling Meadows,
Illinois 60008-4231, USA.Tel: +1 847 290 8090 Fax: +1 847 290 1430
e-mail: taylorhobson@csi.com
™ 1988
At Taylor Hobson we don’t sell products - we providesolutions. Whatever our customers’ measuring needs,we will find a solution to meet them.
Our reputation for excellence is based on more than100 years of metrology design and manufacturingexperience. Add to this our worldwide coverage, ourafter sales support and our commitment to customercare and you have a company which provides itscustomers with total peace of mind.
The Taylor Hobson service:
Special applicationsWe have a team of engineers who provide a designservice for dedicated metrology solutions. This caninvolve customising standard Taylor Hobson instrumentsto meet specific requirements or designing uniqueproducts.
For details of your local support center phone +44 116 246 3034 or e-mail sales@taylor-hobson.com
Centers of ExcellenceOur Centers of Excellence, offer:
• product and theory training either at ourlocal training centers or at our customers’ premises
• instrument and metrology advice
• a trial measurement service to help you decide which product to buy
• lectures and presentations
For details of your local Center of Excellence phone+44 116 276 3779 or email cofe@taylor-hobson.com
After sales supportTo ensure that all our products are maintained to thestandards you require, we offer a range of after salesservice packages. They include an on-site calibrationservice, field service and a refit and upgrade service.
We also offer an instrument calibration service at ourUKAS laboratory in Leicester.
For details of your local support center phone+44 116 246 3135 or email service@taylor-hobson.com
Taylor Hobson LimitedPO Box 36, 2 New Star Road, Leicester, LE4 9JQ, England.
Tel: +44 116 276 3771 Fax: +44 116 246 0579
e-mail: sales@taylor-hobson.com
Internet: http://www.taylor-hobson.com
TAYLOR HOBSONA8248 ISO9001
www.taylor-hobson.com
top related