forgings, powders and bars in high performance alloys ......aluminum-lithium alloys aluminum lithium...
Post on 18-Jan-2021
4 Views
Preview:
TRANSCRIPT
Enhanc ing your per formance
Advanced Solutions for Space Applications Aluminum, Titanium, Superalloys, Special Steels
WWW.AUBERTDUVAL.COM
PM
AlHPS NiSATi
HPS NiSATi
Powders for additive
manufacturing
Rotative and static partsBars
Process flow
Remelting
Melting
Forging and/or rolling Forging
Closed-die Forging
Heat treatment
Machining
Non destructive testing
Conversion
Powder atomization
High Performance Steels: HPS
A range of alloyed steels with tightly controlled characteristics offering optimum value for customers.
PMPowder metallurgy:
Metal Powders (steels, superalloys, titanium) for additive manufacturing.
Nickel-based superalloys: materials keeping high surface integrity while withstanding severe mechanical stress in a high temperature and corrosive environment.
NiSANickel-base Superalloys:
Al.
For specific applications combining resistance with light weight.
Aluminum:
Ti
Pure or alloyed titanium, combining mechanical properties and corrosion resistant with light weight.
Titanium:
Aubert & Duval: a supplier of choice for space industry
Certifications and specifications
In addition to general certifications (ISO 9001, ISO 14001, ISO 18001), our Service Center is certified to the most stringent industry specific standards.
With full vertical integration from melting to remelting, powder atomization, hot converting and machining (rough machining through to near-net-shape parts), Aubert & Duval offers wide-ranging cutting edge capabilities for launch vehicles, satellites and other spacecrafts: structure and propulsion parts, helium tanks, components and fasteners.
We have also put in place over many years dedicated skills and modern simulation capabilities to co-design and re-engineer metallurgical solutions in close cooperation with the main original equipment manufacturers.
Today, we are leveraging this knowledge to help our customers in their strategic projects, from R&D to industrial-scale production, providing high-value metallurgical solutions with close technical support.
Let’s take up the new Space challenges together!
2 # 3
Equipment. MELTING
Melting furnaces (EAF, AOD, VOD) up to 60 tonsVacuum Induction Melting (VIM) up to 20 tonsTitanium Plasma Arc Meting furnace (PAM-CHR)Remelting furnaces (ESR, VAR) up to 30 tons
. POWDER METALLURGYAtomization (Air, VIM)
. FORGINGOpen-die forging presses from 1,500 to 10,000 tonsClosed-die forging presses from 4,500 to 65,000 tons
. ROLLING MILL7-200 mm diameter bars
. HEAT TREATMENTSolution and ageing furnacesHorizontal and vertical quenching equipment
. TESTINGImmersion UT up to 13 tons (28,000 lbs) Automated contact UT up to 20 tons
ince the dawn of the 20th century, Aubert & Duval has been manufacturing products for the most stringent industries: aerospace, power generation, nuclear.
Propellant tanks, engines, boosters, structural parts... everywhere Aubert & Duval contributes to the safety of launchers and to the life of spacecraft. For more than 30 years, Aubert & Duval has been proud to face up to the technological challenges of space industry with our customers, starting with the Ariane 4 launchers and continuing with the new generation of spacecraft.
S
As a specialist in upscale metallurgy Aubert & Duval operates several closed-die forging facilities, such as its 22,000 MT, 40,000 MT and 65,000 MT hydraulic presses. Closed-die forging is the process of forming complex-shaped parts from a metal semi-product between two engraved tools (dies) by pressing with a closed-die forging press.
WWW.AUBERTDUVAL.COM
Closed-die forgings:• Diameter up to 2 m / 79 in• From 20 kgs / 44 lbs
up to 13,000 kg / 28,600 lbsOpen-die forgings: • up to 30,000 kg / 66,000 lbs
Main materials
Main data
Titan
ium
Allo
ys HPS
AD grade Common name
TA6V Ti6Al4VTA6V ELI Ti6Al4V ELITi10 2 3 Ti10 2 3
Ti
* Patented grade
Alum
inum
Allo
ys HPS
Al2000 series Al7000 series50836061Aluminum-Lithium
AI.
Structure parts
Cone Dome
Bracket
HPSFORGINGS
Al TiFORGINGSFORGINGS
Up to 30 tons, up to 7 meters long
Bulkhead
Forged parts and bars for Space applications
Propellant/Helium TanksAI.FORGINGS
Spherical Tanks
PARTS AND BARS
AD grade Common name
819B 35NCD16 35NiCrMo16GKH® 32CDV13 32CrMoV12-9M50NiL 13MoCrNiV42-16-14Marval®18 M250 X2NiCoMo18-8-5ML340 X23NiCoCrMoAl13-6-3MLX®17 X1CrNiMoAlTi12-11-2MLX®19 X1CrNiMoAlTi12-10-2MO6ACW D6AC 48CrMoNiV4-10SCV® 15CDV6 15CrMoV6X15U5W 15-5PH X5CrNiCu15-5X18PA X6CrNiTi18-0XD15NW® X40CrMoVN16-2XDBD 440C X105CrMo17XN26TW A286 X6NiCrTiMoVB25-15-2
HPS
High
per
form
ance
stee
ls
HPSAD grade Common name
AD730® NiCr16Co9Mo3W3Ti3Al2 NY276 C276 NiMo16Cr15W PER3 Waspaloy NiCr20Co13Mo4Ti3AlPER625 IN625 NICr22M9NbPER718 IN718 NiCr19Fe19Nb5Mo3XSH KC20WN CoCr20W15Ni
NiSA
Supe
rallo
ys
TiFORGINGS
Up to 2 meters diameter
4 # 5
Propulsion parts
Compressor disc
Impeller
Shaft
Turbine disc
hanks to unrivalled melting and forging capabilities, Aubert & Duval provides aluminum, superalloy and titanium bars as well as open-die and closed-die forgings, from
small parts to very large components, meeting new spatial requirements for flying longer, lighter and at lower cost.With a recognized metallurgical expertise and decades of experience as a safety-critical forging supplier for the aerospace industry, Aubert & Duval is delivering fully integrated solutions from designing and material choice through to machined parts, with the best performance / cost compromise. We support our customers throughout their strategic development projects to meet the current space sector’s requirements more closely and anticipate future challenges.
T
NiSAFORGINGS
HPSFORGINGS
Up to 4 meters long
Up to 1,4 meters diameter
• Black
• Peeled
• Ground
• Others
Surface conditions
• Annealed
• Hyperquenched
• Normalized
• Heat solution treated
• Heat treated
• Aged
Heat treatment conditions
Main sizes
mm inches
Round Bars Ø 7.5-500 Ø 0.30-20
Flat & Square Bars T ≤ 310 T ≤ 12
Sheets 0.6 ≤ T ≤ 150 0.2 ≤ T ≤ 6
Bars
Aubert & Duval continuously develops new processes and grades able to face space challenges.
HPS ML340
This duplex hardening grade is specifically adapted for turbine shafts operating at high temperature (450°C/840°F), and requiring 2230 MPa/323 Ksi resistance. This allows savings in weight, together with engine efficiency improvement, hence lower gas consumption.
NiSA AD730®
Is a fully innovative nickel-base superalloy. It withstands higher temperatures (750 °C / 1,382 °F), while reserving strength, creep and fatigue resistance at a competitive cost.
Al Aluminum-Lithium alloys
Aluminum Lithium grades allow weight gain up to 4%. Their static properties are equivalent or higher than 7010/7050 and fatigue and rigidity properties improved more than 10%.
Innovation
WWW.AUBERTDUVAL.COM
Pearl®Micro powders
Particle size distribution
A complete metal powder offer for additive manufacturing
POWDERS
Other alloys available upon request
HPSAD grade Common name
Ni718 IN718 NiCr19Fe19Nb5Mo3 HX HastelloyX NiCr22Fe18Mo Ni625 IN625 NICr22M9NbNi247 Ni738
NiSA
Supe
rallo
ys
AD grade Common name
17-4PH X5CrNiCuNb16-4316L X2CrNiMo17-12-2
HPS
High
per
form
ance
stee
lsTit
aniu
m A
lloys HPS
AD grade Common name
Ti6Al4V Ti6Al4VTi6Al4V ELI Ti6Al4V ELI
Ti
Electron Beam Melting 45-106 µm
Direct Energy Deposition 45-106 µm
Laser Beam Melting 10-53 or 15-63 µm
Customized particle size distributions upon request
Thanks to our long-standing experience in the space industry, we can offer tailored metal powder, designing the chemical and mechanical properties according to space requirements.
We help our customers in the definition of metal powder specifications in order to develop suitable solutions for space applications: propulsion, structure parts and components.
Powder Bed
Laser Beam Melting
Electron Beam Melting
Binder jetting & sintering
Blown Powder
Laser Metal Depostion
Cold Spray
Pearl® Micro metal powders are designed for the full range of additive manufacturing processes:
The performance of our powders at the heart of your additive manufacturing success
6 # 7
ver the years, Aubert & Duval has acquired a very thorough knowledge of design and optimization of metal powders in order to meet customers’most stringent requirements,
particularly for aircraft and space applications. We support space equipment manufacturers to achieve success in their development and series production made by additive manufacturing.
Our research centers and development teams are dedicated to developing new alloys and optimizing powder characteristics to achieve the best material performance and processability for all additive manufacturing technologies.
O
Our Atomization Processes
With 40 years of experience in high quality gas-atomized powders, Aubert & Duval has a high level of expertise and also dedicated laboratory equipment ensuring the highest quality for Pearl®Micro powders:
• Powder size distribution: sieving and laser diffraction
• Morphology: SEM pictures
• Chemical composition : X- Ray, Optical
• Emission Spectrometer (OES) and Atomic
• Absorption Spectrometer (GFAAS)
• Other physical properties : density, flowability
Quality Control
Vacuum chamber
Induction furnace
Tundish
Gas jets
Atomization chamber
Powder collection
Quality and certifications
EN 9100
ISO 9001
Customer accreditations
Graphite electrodes
Slag cover
Tundish
Gas jets
Atomization chamber
Powder collection
The performance of our powders at the heart of your additive manufacturing success
Key Benfits of our Atomization Equipment
• Melting in VIM furnace or with ESH technology
• N- or Ar-atomization
• High cleanliness level
• Highly spherical powder morphology
• Fully controlled low oxygen and carbon levels
• Minimize satellites & internal porosities
• High stability and reproducibility
• EN 9100
• ISO 9001
• Customer accreditations
Quality and certifications
ERAMET_logotypeCOLOR_CMYK25/07/2018
C90 M100 Y0 K70
C0 M0 Y100 K0
C0 M70 Y95 K0
C85 M70 J20 N0
C90 M100 Y0 K70
www.aubertduval.com Design by - Aubert & Duval - 03-2019
Printed in France - PEFC 10-31-1592
The information and the data presented herein are typical or average values and are not a guarantee of maximum or minimum values.
Applications specifically suggested for material described herein are made solely for the purpose of illustration to enable the reader to make his own evaluation
and are not intended as warranties, either express or implied, of fitness for these or other purposes. Aubert & Duval ‘s liability shall not extend, under any circumstances,
to the choice of the Product and its consequences.
top related