Physical Regions FoldableInstructions may contain flappydudes.
Use entire sheet of manila
tagboard
Step 1 — Pinch in half on top and bottom
Step 2 — Fold both sides to pinch
Step 3 — Crease both folds
Step 4 — Measure 1 inch from
top
Step 5 — Mark 3 to 4 places top left, top right, and
top middle
Step 6 — Connect dots with a ruler and a pencil line
Step 7 — Cut on line only on the front to the edge and
stop
Step 9 — Pinch both bottom
corners
Step 10 — Draw line between
pinches
Step 11 — Cut to edge on front only
Step 12 — Fold up from bottom
Step 13 — Pinch both bottom corners
Step 15 — Cut to edge on front only
Step 17 — Use that measurement to mark and draw
lines on the top section
Step 18 — Cut to edge on front only
Step 19 — Make the stand-alone heading by cutting
off the top 1 inch flappydudes along the fold only
Finished Flappydude ShellAdd some physical landform region information.