flygt n-pump series - ajay in - ajay · pdf fileflygt n-pump series self-cleaning pumps with...
Post on 01-Feb-2018
289 Views
Preview:
TRANSCRIPT
Flygt N-pump series selF-cleaNiNg pumps with sustaiNed high eFFicieNcy
Broad range capacity
the N-pump advantage
•Patentedtechnology
•Innovativedesign
•Sustainedhighefficiency
•Selfcleaningability
•Modulardesign
•Reliable
•Fewerunplanned service calls
•Ratingfrom2.2hp to 470hp
•Flowupto16000usgpm
•Headsupto400ft
•Submersibleanddryinstallations
•EveryFlygtpumpisperformance tested in the factory
2
Flygt N-pumps take on the tough-estapplicationsandgetthejobdone.every component is designed and manufactured to deliver sustained highefficiency.ThankstopatentedN-technologywithitsinnovativeself-cleaning impeller, Flygt N-pumps deliverthehighesttotalefficiency.Itlowersyourenergybillandreducesunplannedmaintenancecosts.Thatadds up to total peace of mind – and bigsavingsoverthelongterm.
Our vast fluid handling knowledge and dedication to research and develop-ment leads to technological advances and continuous improvement.
That’s why our Flygt N-pumps are at work in more than a hundred thousand installations worldwide. They have proven, by far, to be the best and most reliable choice for both dry and submersible installations.
sustained high efficiency is priceless
INTrOducTION
RobustandreliableEvery Flygt N-pump is tested in the factory to ensure high performance and premium quality. Flygt products deliver outstanding, cost-effective performance that has been proven in applications such as:
• Wastewater• Raw water• Cooling water• Sludge• Storm water• Industrial effluent
insert ring
guide pin
Relief groove
pump housing
impeller
timetime
A) Conventional pump B) Conventional pump running intermittently
C) Flygt N-pump
time
Energy consumptionHydraulic efficiency
timetime
A) Conventional pump B) Conventional pump running intermittently
C) Flygt N-pump
time
Energy consumptionHydraulic efficiency
timetime
A) Conventional pump B) Conventional pump running intermittently
C) Flygt N-pump
time
Energy consumptionHydraulic efficiency
hydraulic efficiency
sustained high efficiency
energy consumption
A.Conventionalwaste-waterpump
B.Conventionalpump running intermittently
C.FlygtN-pump
3
self-cleaning N-pump saves money
DeSIgn
sustained high efficiencyWhen solid objects such as stringy fibrous material and modern trash, enter the inlet of a conventional pump, they tend to get caught on the leading edges of the impeller vanes. This build-up reduced the impeller’s efficiency, resulting in increased power consumption (Fig. A). This increased rate of power consumption generates an increase in energy charges.
the self-cleaning concept
AllFlygtN-pumpshavethesameself-cleaningperformanceregardlessofdutypoint.
Stage1.Mostsolidobjectsenteringthepumpwillpassthrough the impeller between theimpellervanes.Ifanobjectgets caught on the leading edge of one of the vanes, it willslidealongthebacksweptshapetowardstheperimeter oftheinlet.
Stage2.Thesolidobjectwillslidealongthetipoftheimpellervaneinsidethereliefgroove.Theguidepinintheinsertringwillpushalltypesofsolidsawayfromthecenteroftheimpel-ler,alongtheleadingedgeandoutthroughthereliefgroove.
As solids continue to build-up inside the impeller, motor thermal protection can trip causing the pump to stop. This leads to costly unplanned service calls.
If a conventional wastewater pump runs intermittently, the solids build-up will be removed by backflushing when the pump is shut off at the end of the operating cycle. When next cycle begins, efficiency returns to its initial value since the impeller is free from solid objects (Fig B).
The high efficiency of the Flygt n-pump is sustained over time due to its self-cleaning ability, keeping energy costs to a minimum (Fig. c).
16080 320 800 1,600 3,200 7,900 16,000
[Q usgpm]
[h/f
t]
10
20
35
65
165
330
650
3085,3102 and3127
3153,3171,3202,3301and3315
3231,3306,3312,3356and3400
Hard-Iron™(60HRC)forthetoughestwastewaterchallengeshard-iron™,
60HRC
steel, hardened, 60HRC
cast iron, hardened, 47HRC
stainless steel, AISI316,190HB
cast iron, 190HB
Relativelifetime
.0
.1
.2
.3
.4
.5
.6
.7
.8
.9
.10
00
4
Broad capacity range to suit your application
DeSIgn
FlexibleandmodulardesignFlygt N-technology enables you to tailor the hydrau-lics to meet the requirements of virtually any appli-cation. choose the hardened cast iron version for typical wastewater applications and the chopper ring version for cutting long fibres or solids. The Hard-Iron™ version should be used in abrasive applications and waters that cold cause erosion corrosion due to high oxygen content.
Whatever you choose, you never sacrifice pump efficiency – and you can easily switch the module if the operating conditions change.
AcceleratedweartestsprovethatHard-Iron™hydrauliccom-ponentskeeponworkingefficientlywithminimalwearafterpumpingwaterwithaveryhighconcentrationofcoarsesand(2,400tons).
FlygtN-pumpswithHard-Iron™componentscontinuetodeliv-ersustainedhighefficiencywithoutcloggingorerosioncorro-sion,prolonginglifetimeby200percentcomparedtostandardhardenedcastironhydraulics.
Topperformancewithabroadcapacityrange
cast iron impeller withhardenededges and insert ring for typical pumping appli - cations.
Extradurableoptionforabra-sive and ero-sion corrosion applications.
Hard-Iron™(60HRC)cast iron
chopper ring for cutting long fibersorsolids.
Spin-out™sealprotectionforpumpswithcavi-tiesinthesealchamber
5
ThepatentedSpin-out™designexpelsabrasiveparticlesfromthesealchamber,providingprotectionagainstwearoftheouterseal.Asanintegralpartofthesealchamber,Spin-out™isassimpleasitiseffective.
designed and engineered for longer life
Flygt specially designs and manufactures N-pump components, such as the motor, seals and shaft, to optimize operation and prolong pump service life.
motorThe Class H squirrel-cage induction motor delivers outstanding performance and superior heat transfer in submersible and dry installations. Heat losses are concentrated around the shrink-fitted stator, which is cooled by means of the surrounding water. The motor has a neMA Class B maximum operating tem-perature rise of 80°c (176°F) to ensure long service life. Prepared for variable speed operation, all motors are capable of fully utilizing the available power.
long-life sealsDurable tungsten carbide seals offer exceptional mechanical strength as well as superior sliding properties even when running dry. These low-friction seals withstand thousands of hours of high-pressure operation under extreme conditions without cracking, seizing up or showing signs of unaccept-able wear.
LowshaftdeflectionTo minimize vibration, promote quiet operation and prolong seal and bearing life, all Flygt N-pumps feature a short shaft overhang to reduce shaft deflection.
model 3085 3102 3127rating, hp 2.2–4 5–6 7.5–11
discharge 3" 3" 3"4" 4"6" 6"
3085,3102and3127
16080 320 800 1,600
[Q usgpm]
[h/f
t]
10
20
35
65
165
3085
3102
3127
00
6
Lowcapacitypumps
methods of installationNP nS
a semi-permanent free standing installa-tion.Transportablever-sionwithpipeorhoseconnection.
For semi-permanent wetwellinstallations.the pump is installed withtwinguidebarsona discharge connection.
a vertically-mounted, permanentdrywellorin-lineinstallationwithflangeconnectionsforsuction and discharge pipework.
a horizontally-mounted, permanentdrywellorin-lineinstallationwithflangeconnectionsforsuction and discharge pipework.
NT NZ NL
This series of Flygt N-pumps includes three models that handle capacities up to 1,600 USgpm. Like all Flygt N-pumps, these contribute to reducing the total life cycle costs of your installation.
a semi-permanent installation of a pump withinaverticalsteelorconcretecolumn.
Performance,60Hz
Powerratingsandsizes
7
griploc™ seal adaptive N-impeller
SENSORSThermalsensorsembeddedinthestatorwindingspreventover-heating.Optionalleakagesen-sors in the stator and oil housings arealsoavailable.
compliaNceeach pump is tested and approved in ac-cordancewithnationalandinternationalstandards,includingIEC34-1andCSA.Pumpsareavailableinexplosion-proofversions for use in hazardous environ-ments,andareapprovedbytheFactoryMutual,EuropeanStandardandIEC.
LONg-LIFEBEARINgSDurablebearingsprovideamini-mumservicelifeof50,000hours.
CABLEENTRyWater-resistantcableentrypro-videsbothsealingandstrainrelief functions to ensure a safe installation.
BETTERHEATTRANSFERour specially designed and manufactured motorprovidesenhancedcoolingbecauseheat losses are concentrated around the stator.Trickleimpregnatedinresin(ClassHinsulation),thestatorwindingsareratedat180°C(355°F)andenableupto30starts perhour.
ENDURINgSEALSthe griploc™ system con-sistsoftwosetsofmechani-cal shaft seals that operate independently to provide doublesecurityagainstleakage.
With a robust design, griploc™ seals offer consistent performance and trouble-free operation in challeng-ing environments. Solid seal rings minimize leakage and the patented griplock spring, which is tightened
around the shaft, provides axial fixation and torque transmission. In addition, the griploc™ design facili-tates quick and correct assembly and disassembly.
The Flygt N3085 features an adaptive self-cleaning n-impeller that can move axially to enable easy passage of large solids through the pump.
model 3153 3171 3202 3301 3315rating, hp 12–23 25–35 35–75 60–105 85–160discharge 3" 4" 4" 6" 6"
4" 6" 6" 10” 10"6" 10" 8" 12" 12"8" 12" 14" 14"10"
3153,3171,3202,3301and3315
0 160 320 800 1,600 3,200 8,000
[Q usgpm]
[h/f
t]
0
10
20
35
65
165
330
650
31533171
3202
3301
3315
8
methods of installationNP nS
a semi-permanent free standinginstallation.Transportableversionwithpipeorhoseconnection.
Forsemi-permanentwetwellinstallations.Thepumpisin-stalledwithtwinguidebarsonadischargeconnection.
a vertically-mounted, per-manentdrywellorin-lineinstallationwithflangecon-nections for suction and dis-chargepipework.
NT NZ
Powerratingsandsizes
For demanding pumping duties, five models handle fluid transport for capacities up to 8,000 USgpm. Highly efficient, these heavy-duty models provide clog-free performance in order to achieve the best overall life cycle cost.
medium capacity pumps
Performance,60Hz
a horizontally-mounted, permanentdrywellorin-lineinstallationwithflangeconnections for suction and dischargepipework.
9
The Flygt Plug-in™ seal is a seal unit that eliminates the risks associated with incorrect installation and care-less handling. It comprises the Active Seal™ system in one easy-to-handle unit.
The Active Seal™ system is a patented zero-leakage double-seal system that actively prevents liquid from enter-ing the motor cavity, thereby reducing the risk for bearing and stator failure. It comprises a unique inner seal that acts as a micro-pump and an outer seal that prevents leakage of pumped media into the buffer chamber.
Laser-cut grooves on the inner seal create a hydrodynamic pumping effect that prevents any leakage from enter-ing the motor.
This translates into enhanced seal-ing reliability, reduced downtime and fewer unscheduled maintenance checks. In addition, regular service inspections can be prolonged in many applications.
INSPECTIONCHAMBERToincreaseoperationalreliability,aninspectionchamberbetweenthesealunitandthebearingsenablesrapidspotchecksandmaintenance.Inthecaseofasealfailure,abuilt-insensorprovidesanearlywarningofanyfluidbuild-up,thusreducingtheriskofexpensiverepairwork.
eFFicieNt cooliNgThesepumpsarecooledeitherbythesurroundingliquidor,inmoredemandingapplications,withaninternalclosed-loopcoolingsystem.
LONg-LIFEBEARINgSDurablebearingsprovideamini-mumservicelifeof50,000hours.
CABLEENTRyWater-resistantcableentry providesbothsealingandstrainrelief functions to ensure a safe installation.
ENDURINgSEALSthe Flygt plug-in™sealwiththeActiveseal™ system offers in-creasedsealingreliabilityand zero leakage into the motor,therebyreducingtheriskofbearingandstatorfailure.
SENSORSThermalsensorsembeddedinthestatorwindingspreventover-heating, and a leakage sensor in theinspectionchamberminimiz-estheriskforbearingandstatorfailure.
compliaNceeach pump is tested and approvedinaccordancewithnational and international standards, including iec 34-1andCSA.Pumpsareavailableinexplosion-proofversions for use in hazard-ous environments, and are approvedbytheFactorymutual, european standard andIEC.
BETTERHEATTRANSFERour specially designed and manufactured motor providesenhancedcoolingbecauseheatlossesareconcentratedaroundthestator.Trickleimpregnatedinresin(ClassHinsulation),thestatorwindingsareratedat180°C(355°F)andenableupto30starts perhour.
FlygtPlug-insealwithactive seal system
Innersealwithlaser-cut spiral grooves.
™
™
model 3231 3306 3312 3356 3400rating, hp 90–335 70–280 90–470 70–280 60–470
discharge, mm (in) 200 (8") 300 (12") 300 (12") 350 (14") 400 (16")
800 1,600 3,200 8,000 16,000
[Q usgpm]
[h/f
t]
0
20
35
65
165
330
3231
3312
3312 3356
3306 3400
10
large capacity pumps
methods of installationNP nS
a semi-permanent free standinginstallation.Transportableversionwithpipeorhoseconnection.
Forsemi-permanentwetwellinstallations.Thepumpisin-stalledwithtwinguidebarsonadischargeconnection.
a vertically-mounted, per-manentdrywellorin-lineinstallationwithflangecon-nections for suction and dis-chargepipework.
a horizontally-mounted, permanentdrywellorin-lineinstallationwithflangeconnections for suction and dischargepipework.
NT NZ
Powerratingsandsizes
When higher capacity is required, the Flygt n-pump series has five pumps to do the job. These models deliver unprecedented pumping power – reliably and efficiently.
Performance,60Hz
3231,3306,3312,3356and3400
11
Zero leakage into the motor cavity
The Active Seal™ system is a patented zero-leakage double-seal system that actively prevents liquid from enter-ing the motor cavity, thereby reducing the risk for bearing and stator failure. It comprises a unique inner seal that acts as a micro-pump and an outer seal that prevents leakage of pumped media into the buffer chamber.
Laser-cut grooves on the inner seal create a hydrodynamic pumping effect that prevents any leakage to enter the motor.
This translates into enhanced seal-ing reliability, reduced downtime and fewer unscheduled maintenance checks. In addition, regular service in-spections can be prolonged in many applications.
compliaNceeach pump is tested and approved inaccordancewithnationalandin-ternational standards, including iec 34-1andCSA.Pumpsareavailablein explosion-proof versions for use in hazardous environments, and are approvedbytheFactoryMutual,EuropeanStandardandIEC.
LONg-LIFEBEARINgSDurablebearingsprovideamini-mumservicelifeof100,000hours.
CABLEENTRyWater-resistantcableentrypro-videsbothsealingandstrainrelieffunctionsforasafeinstallation.
ENDURINgSEALSTwosetsofmechanicalshaftsealsworkindependentlyfordoublesecurity.TheActiveSeal™systemoffersincreasedsealingreliabilityand zero leakage into the motor, therebyreducingtheriskofbear-ingandstatorfailure.
SENSORSthermal sensors in the stator windingspreventoverheating,and an analogue temperature sensormonitorsthelowerbear-ing.Thestatorhousingandthejunctionboxareequippedwithleakagesensors.Thesensorsdecreasetheriskofbearingandstatorfailure.
BETTERHEATTRANSFERour specially designed and manu-factured motor provides enhanced coolingbecauseheatlossesarecon-centratedaroundthestator.Trickleim-pregnatedinresin(ClassHinsulation),thestatorwindingsareratedat180°C(355°F)andenableupto15startsperhour.
monitoring and control:Empoweryourbusiness
Flygt minicas FlygtMAS711
12
Flygt MiniCAS is a supervision relay for stator temperature and leakagesensorsdesignedforlowandmediumcapacityFlygtN-pumps.
Flygt MAS 711 is a protective monitoring system for medium andlargecapacityFlygtN-pumps.
Ready-to-installprefabricatedpumpstationsFlygt N-pumps can be delivered ready to install in standard, prefabricated pump stations with every-thing you need. Our prefabricated pump stations feature the most reliable and cost-effective pumping solutions. Our solutions are pre-assembled with your
complete solutions for your needs
configuration of valves, discharge pipe, and inlet and outlet connections. Installation and startup is easy and requires minimal time.
TeCHnICAL DATA
Flygt N-pumps: Submersibleanddryinstallations
13
Flygt N-pumps are an excellent choice for handling solids indry-pitinstallations.Originallydesignedforsubmersible conditions, our pumps eliminate the risk of damage to the motorduetostationflooding.Submersibleordry-installedFlygtN-pumpsdeliversuperiorclog-freeoperationwith minimalmaintenanceandsubstantialenergysavings.
engineered solutionsFlygt n-pumps can be configured to your specific requirements. Our engineers work closely with you, from design and system analysis to selection of prod-uct and installation equipment. This enables us to deliver reliable and cost-effective pumping solutions.
Perfectcompliance.AllFlygtmonitoringandcontrol equipment integrates easily into any scadacontrolsystem.
Optionstablecustomize your Flygt N-pump with optional equipment.
Flygt N-pump model 3085 3102 3127 3153 3171 3202 3301 3315 3231 3306 3312 3356 3400Option/Producthydraulic
guidepin
Hard-Iron™
chopper
Adaptive Nseal system
griploc™ seal
Plug-in™ seal
Active Seal™
Spin-out™
Seal flushcooling system
1. No cooling
2. Internal
3. Integrated
4. externalinstallation
NP
nS
NT
NZ
NLaccessories
Flush valvepump monitorPrepared for
– Mini CAS
– MAS
= standard
= optional
=Standardbutalsooptionaldependingonmodel
=Standardornotavailabledependingonmodel
=Optionalornotavailabledependingonmodel
Flygt N-pump
Purchase cost
Energy cost
Service cost
Unplanned maintenancecost
Life cycle costs
Conventional pump2 service calls/year
Conventional pump12 service calls/year
14
TeCHnICAL DATA
Thepowertoadapt
self cleaning saves money
Schematicoverviewofcalculationsmadeona30kWpump.
extensive monitoring and control
genuine Flygt spare partsandwarranty
Whendowntimeisn’tan option, rely on ourglobalservicenetworkto deliver genuine Flygtspare parts to you –quicklyandefficiently.all Flygt spare parts arebackedbyasolid15-yearavailabilityguaran-tee.Largecapacitypumpseven20-year.
Wesupplyhardwareandsoftwareforcom-plete process systems – from individual pump drives, starters, sen-sors and controllers to systemsoftwareandscalablescadasystems.
15
Supportingyourbusiness,everystepoftheway
SUPPoRT & SeRvICe
Extensiveengineeringknow-howXylem has extensive knowledge of fluid dynamics and vast practical experience in designing, operating and maintaining efficient wastewater transport systems.We provide a broad range of engi-neering services, including:
• System analysis and calculations• Sump design• Water hammer calculations• Pump start analysis• Transient analysis• Computational Fluid Dynamics (CFD)• Scale model testing
In short, we can assist you with everything you need for optimal performance and economical, energy-efficient operation.
EmpoweryoursystemWith Flygt monitoring and control products, you can control and optimize the performance of every component of your system. This helps reduce stress on pumps, valves and mains, enable reliable, efficient operation and prolong service lifetime.
support for your Flygt pumpsOur global network of local service centers and service partners, provide integrated services to support safe, efficient and reliable operation. To ensure trouble-free operation and minimal downtime, count on us for quick, professional response and quality maintenance services, using genuine Flygt spare parts.
Xylem |'zīl m|1) The tissue in plants that brings water upward from the roots; 2) a leading global water technology company.
We’re 12,000 people unified in a common purpose: creating innovative solutions to meet our world’s water needs. Developing new technologies that will improve the way water is used, conserved, and re-used in the future is central to our work. We move, treat, analyze, and return water to the environment, and we help people use water efficiently, in their homes, buildings, factories and farms. In more than 150 countries, we have strong, long-standing relationships with customers who know us for our powerful combination of leading product brands and applications expertise, backed by a legacy of innovation.
For more information on how Xylem can help you, go to www.xyleminc.com
Xylem, Inc.14125 South Bridge CircleCharlotte, NC 28273Tel 704.409.9700Fax 704.295.9080www.xyleminc.com
Flygt is a trademark of Xylem Inc. or one of its subsidiaries. © 2012 Xylem, Inc. FEB 2012
e
FB00
2 -
8968
76 •
Fly
gt
n-p
ump
ser
ies
Bro
chur
e •
03/2
012
• U
S
top related