flender couplings – the coupling range high quality based ... · alfred-flender-straße 77 46395...
Post on 12-Mar-2020
8 Views
Preview:
TRANSCRIPT
High quality based on engineering and experience.
www.siemens.com/couplings
Technical Data*
Nominal torque/power rating [Nm or kW] 13.5 Nm ... 3,700 Nm 19 Nm ... 62,000 Nm 19 Nm ... 21,200 Nm 200 Nm ... 1,300,000 Nm 24 Nm ... 14,500 Nm 330 Nm ... 63,000 Nm 1,600 Nm ... 90,000 Nm 0.5 kW ... 2,500 kW 1,300 Nm ... 7,200,000 Nm 850 Nm ... 125,000 Nm 100 Nm ... 17,000 Nm 170 Nm ... 1,450,000 Nm 92 Nm ... 80,000 Nm 1,000 Nm ... 535,000 Nm
Perm. peripheral speed [m/s] 36 36 36 40 / 60 35 66 36 / 60 80 60 60 100 55 / 100 55 200
Temperature at place of installation [°C] – 30 °C ... + 80 °C – 50 °C ... + 100°C – 30 °C ... + 80 °C – 50 °C ... + 100 °C – 50 °C ... + 70 °C – 40 °C ... + 120 °C – 40 °C ... + 80 °C – 40 °C ... + 50 °C – 20 °C ... + 80 °C – 20 °C ... + 80 °C – 40 °C ... + 280 °C – 40 °C ... + 280 °C – 40 °C ... + 280 °C – 40 °C ... + 280 °C
Perm. angular misalignment [°] 0.1° 0.2° 0.2° 0.2° 4° 0.5° 0.5° 0.2° 1° 0.5° 0.7° 0.7° / 0.4° / 0.3° / 0.2° 3° 0.35° / 0.25° / 0.18°
The coupling range
BIPEX N-EUPEXStandard
N-EUPEXDS
RUPEXRWN / RWS
ELPEXB
ELPEXS
ELPEXStandard
FLUDEX ZAPEXZW
ZAPEXZI
ARPEXARP-6
ARPEXARS – ARC
ARPEXARW-4/6
ARPEXART-6/8/10
Brochure (as per 11/2007) MD 10.1 MD 10.1 MD 10.1 MD 10.1 MD 10.1 MD 10.1 MD 10.1 MD 10.1 MD 10.1 MD 10.1 MD 10.1 MD 10.1 MD 10.1 MD 10.9
FLENDER couplings –The right coupling forevery application
Characteristic features
Flexible couplings Highly fl exible couplings Hydrodynamic couplings Torsionally rigid couplings
Claw coupling Pin coupling Pin coupling Pin and bush coupling Rubber tyre coupling Rubber disk coupling Ring coupling Fluid coupling Gear coupling Gear coupling All-steel coupling All-steel coupling All-steel coupling All-steel coupling
Properties fail-safetorsionally fl exible; damping
fail-safetorsionally fl exible; damping
w/o fail-safe devicetorsionally fl exible; damping
fail-safetorsionally fl exible; damping
w/o fail-safe devicehighly fl exible; damping
w/o fail-safe devicehighly fl exible; damping
w/o fail-safe devicehighly fl exible; damping
ability to sliphydrodynamic
fail-safetorsionally rigid; double-jointed
fail-safetorsionally rigid; double-jointed
fail-safetorsionally rigid; double-jointed
fail-safetorsionally rigid; double-jointed
fail-safetorsionally rigid; double-jointed
fail-safetorsionally rigid; double-jointed
*For specifi c applications, detailed features of performance of the listed products can be derived from the latest edition of the respective product brochure.
Service
Maintenance intervals Annual visual inspection Annual visual inspection Annual / 10,000 operating hours Annual Maintenance-free – annual visual inspection recommended
Radially removable wearing parts � / � � / � � � � / � � � / � � � � �
Expenditure on installation � � � � � � � � � � � � � � � � � � � � � � � � � � � � �
� = Standard � = Optionally available � = low � � = average � � � = high
Examples of Application
Pumps, Compressors, Bell housing installation
Pumps, Compressors,Fans/Blowers
Pumps, Compressors, Fans/Blowers
Pumps, Compressors,Rotary kilns, Cement mills
Pumps, Compressors,Fans/Blowers,
Roller table drives
Compressors, Excavators, Diesel engines
Compressors, Excavators,Shredders
Conveyor belts, Mixers,Crushers,
Fans/Blowers
Presses, Crushers,Pumps, Mixers
Presses, Crushers,Pumps, Mixers
Pumps, Compressors,Fans/Blowers
Gen. machine building,
paper machines,
printing machinery
Paper machines,Wind turbines
High-speed generators,Pumps, Compressors,
Turbines
Designs
With Taper bush � � � � � � � � � �
With clamping hub � � � � �
With spacer � � � � � � � � � � � � �
With brake disk/drum � � � � � � � � � � � �
With SAE fl ange � � � � � � � � � �
With sliding hub � � � � � � �
Vertical mounting position � � � � � � � � � � � / � � / � � / � � / �
With axial play limiting device � � � � � � � � �
As clutch/coupling combination � � � � � �
As shear pin coupling � � � �
Creeping-current insulation � � � � � � � � �
Acc. to API 610 /API 671 � � � API 610 (671) API 671
Acc. to directive 94/9/EC � � � � � � � � � � �
� = available as standard � = Optionally available
FLENDER CouplingsSubject to change without prior noticeOrder No.: E20001-A10-P900-V1-7400DISPO 279042100/11893 PO MK.ST.XXXX.52.8.01 04083.0Printed in Germany © Siemens AG 2008
Siemens AGIndustry SectorMechanical DrivesAlfred-Flender-Straße 7746395 BOCHOLTGERMANY
Answers for industry.
The information provided in this brochure contains merely general descriptions or characteristics of performance which in actual case of use do not always apply as described or which may change as a result of further development of the products. An obligation to provide the respective characteristics shall only exist if expressly agreed in the terms of contract.
All product designations may be trademarks or product names of Siemens AG or supplier companies whose use by third parties for their own purposes could violate the rights of the owners. www.siemens.com/automation
330 Nm ... 63,000 Nm
66
top related