flapping bird
Post on 21-Apr-2017
2.772 Views
Preview:
TRANSCRIPT
Origami Flapping Bird
How
to m
ake
an
Bitzania A. Monroy
Step byStep
Bitzania A. Monroy
1 Crop a perfect squareand
Fold diagonally
Bitzania A. Monroy
2 Now fold in half in both sides as shown
to create these creases
Bitzania A. Monroy
3 Using these creases you have made, bring the top 3 corners of
the model to the bottom corner.
Bitzania A. Monroy
3 flatten model, as shown
Bitzania A. Monroy
4 Fold top triangular flaps into the center
and unfold
Bitzania A. Monroy
5 Open the uppermost flap, and bringing it
upwards and pressing the sides of the model inwards at the same
time.
Bitzania A. Monroy
5 Flatten down, creasing well
Bitzania A. Monroy
6 Turn model over and repeat Steps 4 -5 on
the other side.
Bitzania A. Monroy
7 Opens both corners and bends as shown.
Bitzania A. Monroy
7 You must have this form.
Bitzania A. Monroy
8 Push the bottom “leg” and tuck it inside itself to create a
head. And push the other “leg” to the left
side a little bit.
Bitzania A. Monroy
8 Push the bottom “leg” and tuck it inside itself to create a
head. And push the other “leg” to the left
side a little bit.
Bitzania A. Monroy
9 Fold the points of the bottom up, on each
side
Bitzania A. Monroy
1 Fold the end of the wings down, in both
sides. 0
Bitzania A. Monroy
Done
Bitzania A. Monroy
Done
Bitzania A. Monroy
Thanks
For watching
top related