finger scraper - taking off - infinity...
Post on 03-Jul-2020
0 Views
Preview:
TRANSCRIPT
"I wish you guys could
come up with a
scraper that would
actually work on
cleated belts. These
other brushes don’t
work worth a crap and
they keep getting
plugged up and cost
me a fortune."
- Gordon (Whitecourt Power)
This Quarter:
Infinity Belting Ltd.
Finger Scraper
Millwrighting Services
Liquid Fire
Mechanical De-Icer
X22 Pellet Melt
Texture Top &
Slinger Truck Belts
Upcoming Events
Finger Scraper—Frame Design
Finger Scraper - Taking Off
What is the concept behind the Finger Scraper design? To ‘Take Off’ Carry back of course! We have brought together ideas based on the needs of what our customers have been wanting. While the conventional Scraper systems may work, they are not efficient by most standards. With the Finger Paddle segments attached to a solid frame design as opposed to the typical bar construction of a conventional bristle brush, the highly durable urethane fingers produce a flicking motion that effectively removes carry-back and that are not prone to “clogging up”.
Our product has been tested both on textured & smooth surface belting with great
results. Our original test system is still in use after 2 years of service in an aggregate
plant, the urethane paddles are extremely durable and have only experienced minimal
wear. We have built our product to meet the requirements of our tough Canadian
climate, from heat to extreme cold, the Finger Scraper keeps on working.
SAFETY IS KEY
When we look at investments for new products our key concern is Safety. How will our
product benefit safety on our customer’s site? With our scraper design having minimal
pinch points and a light-weight aluminum frame, it is the safer choice. With carry back
reduced / eliminated, there are less hazards to consider on the work site such as the
possibility of tripping over carry-back that has piled up, eye injuries caused by falling
debris and inhalation of fine particles.
January 2016 Infinity Belting Quarterly Newsletter
Millwright At Your Service In todays Industry, we are trying to move along with our fast paced
Society. In offering Millwright Services, we are able to assist in the
needs of the majority of our Customers by being the All-In-One go
to supplier.
Several of our Millwright Services include, but are not limited to:
working with Alignment, Bearings, Conveyor Belts, Conventional,
Lightweight & Elevator conveyors, Conveyor Roller & Pulleys,
Fabrication, Flat & Incline Conveyors, Gearboxes, Trouble
Shooting & V-Belts. We have serviced many different types of
Industries, including Aggregate, Fertilizer, Food, Forestry, Grain &
Mining.
Contact our office if you would like more information regarding our
services provided.
Liquid Fire Mechanical
De-Icing Liquid fire has been the go to for
spray on applications, putting an
end to burn barrels and chipping
away ice build up. Our De-icing
agent offers an environmentally
friendly mixture that works with
moving parts on your heavy
equipment/ machinery to keep
production going (Works at –32C
but effective to –50C). We have
20L Pails & 205L Barrels available
in stock.
Liquid Fire De-icing Treatment
Millwright Services Are Now Offered
X22 Pellet Ice Melt
X22 Pellet Ice Melt
Our Pellet formulated Ice Melt X22 is much like Liquid fire, but used for ground application. Like Liquid fire; it too is Environmentally friendly as well as Pet friendly and safe on plants like grass & shrubs. Unlike sand and salt, X22 will not leave residue or rust on your vehicle or damage your grass with the dreaded clean up in the spring. It keeps working in the coldest temperatures and until washed away. Because of its concentrated mix, you can lay it down before a snowfall to keep ice from forming and do not need a lot of it to work, light application works well. Available in 5kg & 20kg.
Slinger Belts
There has been a mass
use for the Slinger Belts.
With Gravel Trucks
hauling 24/7 for the
roadways, landscaping
and other such
business’, we have stock
ready and on-hand for
use when the need
arises.
Texture Top & Cleated Belts have many uses for different industries
Texture top for Multi-Use The biggest deal about the texture top belting is that it is a multi-use belt. If you
have ever seen a gravel slinger truck in action you can tell how good these belts
work for them. But on the other hand, they work great for tracks on decks for
gripping the treads of the ATVS & Snowmobiles for loading. Once the tracks are
down not only are they good for loading but they reduce the wear on the deck/
liner of the vehicle.
With good traction for loading your recreational sport bike, ATV, snowmobile,
seadoo or whatever it is you may need more traction for, you are protecting your
investment from potential damages.
Keeping good size treads on the belt for the slinger trucks ensures that their loads
are at full capacity moving along to increase production, less downtime & less
damaged parts. Keeping your business moving at an optimal rate is our business.
14” Texture Top Belt
Contact Us
For more information
about our products and
services please contact
us at:
Infinity Belting Ltd.
#107– 951 Boulder
Blvd Stony Plain, AB
T7Z 0E7
TF: 1 (855) 963-3084
P: (780) 963-3084
Fax: (780) 963-3214
info@infinitybelting.com
Dates to Note:
March 19, 2016: Bust A Move—Team Infina-Titties for the Alberta Cancer Foundation Fundraising event at the Edmonton Expo Center. Www.albertacancer.ca/InfinaTitties to Donate
May to Sept 2016: Infinity Ball—Looking for a good way to spend some downtime? Visit us on Facebook to find out our Charity Ball Tournament dates. Various charities registered.
October 2016: Comedy for a Cause—Join us on a night filled with laughter, food and drinks for a great cause. See Facebook page closer to the time about how to purchase your tickets for this amazing event and how you can support food for families campaign.
Stay tuned are more event dates to be confirmed.
Www.facebook.com/infinitybelting
top related