fenders uhs big wheel kits neck cup and bearing kit, 40mm transmission plate welded on, and side...
Post on 24-Apr-2018
215 Views
Preview:
TRANSCRIPT
www.harleycustom.com
In this chapter you will find:
Peter Penz Original Custom BikesHPUSuper Cycle ShopHogtechFournalesRear SuspensionDNAUHSZassels
Choose your chassis from our wide range.Youwant an Evo® or Twin Cam® chassis or narrowor wide back end or a Swedish style orChopper? Big Wheel Kits and Fenders areavailable here too.The choice is wide and thechoice is yours. Match it up with furtherselections from our engine/transmission/wheels/forks departments.
Don't forget, before you design yourbike or buy the parts, decide whattyres/wheels you want to use andensure they are available for you to buy.
See our 'Custom Bike Parts Checklist'available from us just an email away on
arharley@harleycustom.com
Frames and ChassisBig Wheel KitsFenders
SS CycleU-StationTolleJohann SchwarzRoland Stocker
www.harleycustom.com 71
Peter Penz originalcustom bikes - fromdrawings to manufactureand beyond1., 2. & 3. These are some of the early drawingsthat contributed to the design of the framesand chassis parts.
The Penz Team: Bert - Chief Welder, Peter Penzenstadler,Max - Welder & frame builder
frames and chassis
4. This is the frame jig on which the frame isassembled & welded.
5. You can see the finished chassis.These frameshave been designed to be strong and come withTUV certification.This is an important documentto help when registering your custom bike. Inmany European countries it is a legalrequirement. In the UK when you have to putyour bike through the SVA test, the TUVdocument is invaluable.
If TUV certification is not a legal requirement,then if nothing else it gives you confidence inthe strength and quality of the chassis.
1
2 3
4
5
Telephone: UK 01424 830542
frames and chassis
The ultimate in quality and style.See examples of some of the best customs ever made using these Austrian made frames.All come with TUV!
We offer the complete range from thisrespected quality manufacturer.
Options available for your frame
• Up to 300 tyre size
• Right side drive
• Left side drive
• Evo Engine
• Twin Cam® A engine with Evo transmission
• Twin Cam® B engine
• Sportster® Engine
• Feuling® W3 Engine
• Rake 34 to 45 degrees
• Neck Height from – 4” to + 9”
• Backbone stretch up to 6”
• Single front down tube
• Key support (this is now a legal requirement in some countries)
• Swingarm with right side brake mounting
• Swingarm with left side brake mounting
• Swingarm without brake mounting
• Rear wheel axle is 1”
• Single sided swingarm
• Spoiler 3D Air dam
• Simple ordering process
72
www.harleycustom.com 73
frames and chassis
Penz Flash Style Frame - for up to250 tyre
03000 Flash Style Frame Kit - withswingarm "Marlin" Rear wheelaxle kit, frame axle kit, frameneck cup and bearing kit, 40mmtransmission plate welded on
03001 Flash Style Frame Set - withswingarm "Marlin" Rear wheelaxle kit, frame axle kit, frameneck cup and bearing kit, 40mmtransmission plate welded onand side plates (frame inserts)welded on
03002 Flash Style Frame Chassis - withswingarm "Marlin" Rear wheelaxle kit, frame axle kit, frameneck cup and bearing kit, 40mmtransmission plate welded onand side plates (frame inserts)welded on, fenderstruts model Bwith cutout, rearfender +electric box welded on
Extra Parts:
03012 Sportster offset pulley kit
03060XL Oiltank stainless steel
03070 Axle covers (one pair) -obligatory
03075 Side plates (frame inserts) loose
03080 Spoiler 3D, welded on
Telephone: UK 01424 83054274
03008L Flash Style Frame Set
03008R Flash Style Frame Set, RSD withswingarm "Marlin" - rear wheelaxle kit, frame axle kit, frameneck cup and bearing kit, 40mmtransmission plate welded on,and side plates (frame inserts)welded on
03009L Flash Style Frame Chassis
03009R Flash Style Frame Chassis, RSDwith swingarm "Marlin" - rearwheel axle kit, frame axle kit,frame neck cup and bearing kit,40mm transmission platewelded on, and side plates(frame inserts) welded onfenderstruts model B withcutout, rear fender + electricbox and side plates (frameinserts) all complete welded
Extra Parts
03012 Sportster offset pulley kit
03060XXL Oil tank XXL stainless steel
03070 Axle covers (one pair) -obligatory -
03075 Side plates (frame inserts) loose
03080 Spoiler 3D, welded on
03020 Torque arm, polished
frames and chassis
Penz Flash Style Frame - (for 280/300 tire) up to 12,5" rear wheel
03007L Flash Style Frame Kit
03007R Flash Style Frame Kit, RSD withswingarm "Marlin" - rear wheelaxle kit, frame axle kit, frameneck cup and bearing kit, 40mmtransmission plate welded on
6 speed RSD transmission - seeengine & transmission section
www.harleycustom.com 75
Mono-Swingarm "Poker" Polished Aluminium
03010 With polished stainless steel reardisc 11,5" with polished mountingbracket for 4 piston calipers likePM, Rev Tech, Roland Stocker,Ness With battery box in stainlesssteel, with frame axle and rearwheel axle. Suitable for 1-1/2” andfor 1-1/8” teeth pulley as well asfor a small or a wide belt and9” x 18” wheels without hub fromRicks Motorcycles.
For use with EVO and Twin Cam Aengines. Fitting on Penz frames only. Formounting on OEM frames will be availablesometime during 2004.
Please ask for details of Ricks wheels ifyou wish to purchase this swingarm.
Penz flash style frame - for Feuling Engine
03010F Flash Style Frame Chassis, RSDwith swingarm "marlin" - rearwheel axle kit, frame axle kit,frame neck cup and bearing kit,40mm transmission platewelded on, and side plates(frame inserts) welded onFenderstruts model B withcutout, rear fender + electricbox and side plates (frameinserts) all complete welded
frames and chassis
Extra Parts
03060F Oil tank XXL stainless steel
Feuling Engine - see Engine and Transmission section
• See our range of quality budget priced 6 speed RSD & LSD transmissions
• Order your tyres & suspension from us
• See our large range of Aluminium & Steel Gas Tanks - For advice on fitment,please give us a call
• You may need some offset parts
• See our range of offset parts in the 'Big Wheel' section
• See our range of exhaust systems to complete your custom bike.Our ‘Phoenix’ exhaust comes with mounting bracket for Penz frame
order form
We can post, email or fax an order formto you for completion
6 speed RSD transmission - see Engineand Transmission section
Drag Style Frame for Evolution• Standard width frame takes up to
230 tyre with 8in rim and standardwidth belt
• Extra wide frame takes up to 230 tyrewith 9in rim and standard width belt
• Frame kit comes with polished Stainless steel head cups/bearings, oil tank and mountings
• When ordering – indicate if you need gas tank mounts
To complete your frame order you need:
• Frame kit. Choose standard width orextra wide
• Swingarm kit. Look at Swingarm section
• Optional Fender struts
• Optional battery case
Telephone: UK 01424 83054276
frames and chassis
HPUAll HPU chassis are designed on a3D CAD system. Parts are CNCmachined for strength before weldingon QM system 9001. Drag frameshave seat heights 4in lower thanstandard and are designed for up to130 bhp. All come with TUV.
To complete your frame order you need:
• Frame kit. Choose from
• Drag Style Frame for Evolution®
• Drag Style Frame for Twin cam®
• Chopper Frame
• Swingarm kit. Look at Swingarmsection
• Optional Fender struts
• Optional battery case
6 speed transmission - see engine &transmission section
www.harleycustom.com 77
frames and chassis
Fender Struts
000195 ABig Cut - Raw, pair
000197 ASmooth - Raw, pair
000197 CA Smooth - Chrome, pair
999994 Polished billet battery case
Swingarms for Drag style frames...see Swingarm section on page 81
Oil Tank (included with Frame Kit)
Build HintStandard and Extra wide Drag style frameRear Belt - 133 teethRear Belt Pulley - 61 teethBelt width - 1-1/8"Extra wide drag style frameTransmission offset for 8" x 15" wheel &230 tyre - 40mm
Big Cut Style
Smooth Style
Part Number Part Number Style Neck Stretch Rake-DegStandard Width Extra Wide Height
010008-KIT 010008 XL-KIT Big Cut 0" 6" 40010009-KIT 010009 XL-KIT Big Cut +4" 6" 40010010-KIT 010010 XL-KIT Smooth 0" 6" 40010011-KIT 010011 XL-KIT Smooth +4" 6" 40010012-KIT 010012 XL-KIT Big Cut 0" 6" 32010013-KIT 010013 XL-KIT Big Cut +4" 6" 32010014-KIT 010014 XL-KIT Smooth 0" 6" 32010015-KIT 010015 XL-KIT Smooth +4" 6" 32010016-KIT 010016 XL-KIT Big Cut 0" 0" 40010017-KIT 010017 XL-KIT Big Cut +4" 0" 40010018-KIT 010018 XL-KIT Smooth 0" 0" 40010019-KIT 010019 XL-KIT Smooth +4" 0" 40010020-KIT 010020 XL-KIT Big Cut 0" 0" 32010021-KIT 010021 XL-KIT Big Cut +4" 0" 32010022-KIT 010022 XL-KIT Smooth 0" 0" 32010023-KIT 010023 XL-KIT Smooth +4" 0" 32
Drag Style Frame forTwin Cam• Frame takes up to 230 tyre with 9in rim
and standard width belt
• Frame kit comes with polished Stainlesssteel head cups/bearings, oil tank andmountings
• When ordering – indicate if you needgas tank mounts
To complete your frame order you need:
• Frame kit
• Swingarm kit. Look at Swingarm section
• Optional Fender struts
• Optional battery case
Fender Struts
000195 ABig Cut - Raw, pair
000197 ASmooth - Raw, pair
000197 CA Smooth - Chrome, pair
Telephone: UK 01424 83054278
frames and chassis
Part Number Style Neck Stretch Rake-DegStandard Width Height
010008 TC-KIT Big Cut 0" 6" 40010009 TC-KIT Big Cut +4" 6" 40010010 TC-KIT Smooth 0" 6" 40010011 TC-KIT Smooth +4" 6" 40010012 TC-KIT Big Cut 0" 6" 32010013 TC-KIT Big Cut +4" 6" 32010014 TC-KIT Smooth 0" 6" 32010015 TC-KIT Smooth +4" 6" 32010016 TC-KIT Big Cut 0" 0" 40010017 TC-KIT Big Cut +4" 0" 40010018 TC-KIT Smooth 0" 0" 40010019 TC-KIT Smooth +4" 0" 40010020 TC-KIT Big Cut 0" 0" 32010021 TC-KIT Big Cut +4" 0" 32010022 TC-KIT Smooth 0" 0" 32010023 TC-KIT Smooth +4" 0" 32Oil Tank
(included with Frame Kit)
Swingarms for Drag style frames...see Swingarm section on page 81
Build HintStandard and Extra wide Dragstyle frameRear Belt - 133 teethRear Belt Pulley - 61 teethBelt width - 1-1/8"Extra wide drag style frameTransmission offset for 8" x 15"wheel & 230 tyre - 40mmTransmission offset for 9" x 15"wheel & 230 tyre - 40mm
Big Cut Style
Smooth Style
999994 Polished billetbattery case
www.harleycustom.com
frames and chassis
Chopper Frame• Frame takes up to 250 tyre with 9in rim
• Frame kit comes with polished Stainlesssteel head cups/bearings, oil tank andmountings
• When ordering – indicate if you needgas tank mounts
To complete your frame order you need:
• Frame kit
• Swingarm kit. Look at Swingarm section
• Optional Fender struts
Oil Tank (included with frame kit)
000180 Fender struts-raw - left side
000181 Fender struts-raw - right side
79
Evo Engine - right side drive
Twin Cam Engine - left side drive
Telephone: UK 01424 83054280
frames and chassis
Width Frame Belt Belt Pulley Max Tyre Size Belt WidthTeeth Teeth Rim Size
Standard Evo LSD 65 130 8" x 18" 250 1- 1/8"Standard TC LSD 70 135 9" x 18" 250 1-1/8"Wide Evo LSD 65 130 9" x 18" 250 1-1/8"Wide TC LSD 70 135 9" x 18" 250 1-1/8"Standard Evo RSD 65 130 8" x 18" 250 1-1/8"Standard TC RSD 70 135 9" x 18" 250 1-1/8"Wide Evo RSD 65 130 9" x 18" 250 1-1/8"Wide TC RSD 70 135 9" x 18" 250 1-1/8"
Swingarms for Chopper frames...see Swingarm section on page 81
TP Engineering Motors - see Enginesand Transmissions section
• See our range of quality budget priced 6 speed RSD& LSD transmissions
• Order your tyres & suspension from us
• See our large range of Aluminium & Steel Gas Tanks- For advice on fitment, please give us a call
• You may need some offset parts
• See our range of offset parts in the 'Big Wheel'section
• See our range of exhaust systems to complete yourcustom bike. Our ‘Phoenix’ exhaust comes withmounting bracket for Penz frame
Part Number Width Engine - Left or Neck Rake-DegRight Side Drive Height
010040-KIT Standard Evolution - LSD +6" 32010040TC-KIT Standard TCB - LSD +6" 32010041-KIT Standard Evolution - LSD +6" 40010041TC-KIT Standard TCB - LSD +6" 40010042-KIT Wide Evolution - LSD +6" 32010042TC-KIT Wide TCB - LSD +6" 32010043-KIT Wide Evolution - LSD +6" 40010043TC-KIT Wide TCB - LSD +6" 40010040-KIT Standard Evolution - RSD +6" 32010040TCRSD-KIT Standard TCB - RSD +6" 32010041RSD-KIT Standard Evolution – RSD +6" 40010041TCRSD-KIT Standard TCB – RSD +6" 40010042RSD-KIT Wide Evolution – RSD +6" 32010042TCRSD-KIT Wide TCB – RSD +6" 32010043RSD-KIT Wide Evolution – RSD +6" 40010043TCRSD-KIT Wide TCB – RSD +6" 40
81
frames and chassis
www.harleycustom.com
Swingarms for Dragstyle andChopper Frames
Swingarms come complete with wheelaxle kit/swingarm axle kit includingbearings
Style Drag Style for Twin Cam® Drag Style for Evolution® Drag Style for Evolution® ChopperStandard Width Extra Wide
Style Part Number Part Number Part Number Part Number
1. Swingarm with excenter 011015 XLTC-KIT 011015-KIT 011015 XL-KIT 011023-KIT
2. Swingarm with chain adjuster system 011016 XLTC-KIT 011016-KIT 011016 XL-KIT 011023K-KIT
3. Custom style swingarm with excenter 011017 XLTC-KIT 011017-KIT 011017 XL-KIT
4. Custom style swingarm with standard chain adjuster 011018 XLTC-KIT 011018-KIT 011018 XL-KIT
5. Curved style swingarm 011051TC-KIT 011051-KIT
6. Round style swingarm 011052TC-KIT 011052-KIT
7. New Style Swingarm 001089-KIT
HPU Catalogue Please ask for
a copy
1
4 5 6 7
2 3
Telephone: UK 01424 83054282
frames and chassis
Sportster custom using SCS frame kit. Built by Santiago Chopper. USA. Exhaust System &WBO gas tank are from AR Harley & Sons.These can be ordered along with frame order.
Engine: Look at Engine and Transmission section
Sportster custom using a SCS frame kit. Built by V-Motors (Belgium) www.v-motors.be ExhaustSystem ‘Hotrods’ & ‘Chopper’ gas tank are both from A R Harley & Sons. We can supply these alongwith frame order. Contact Johan at V-Motors if you want them to build you one.
SCS Sportster‚‘Dragstyle’ FrameKit®
These quality kits include……frame,swingarm, neck cups and bearing kit,engine mounting kit, oiltank, battery box,axle adjuster, fork lock, swingarm axle &wheel axle.With TUV.
Frame Kit
R1015 Sportster Dragstyle frame kit,including swingarm 32 deg rake
R1016 Sportster Dragstyle frame kit,including swingarm 36 deg rake
R1017 Sportster Dragstyle frame kit,including swingarm 40 deg rake
Malteser
www.harleycustom.com 83
frames and chassis
SCS Evo & TwinCam® ‘Dragstyle’Frame Kits®
These quality kits include……frame,swingarm, neck cups and bearing kit,engine mounting kit, oiltank, battery box,axle adjuster, fork lock, swingarm axle &wheel axle. Made for Evolution‚ engineand Twin Cam‚ A motor using adapter forEvolution style transmission.With TUV
R1033 Softail dragstyle frame kit,including swingarm 32 deg rake
R1034 Softail dragstyle frame kit,including swingarm 36 deg rake
R1035 Softail dragstyle frame kit,including swingarm 40 deg rake
36-995 Twin Cam A Adapter
Optional Extras
36-995 Twin Cam‚ A Adapter
Mount a Twin Cam‚ A motor in this frameusing an up to 99 transmission
F1090 Stainless steel beltgard
F1090-1 Stainless steel beltgard-polished
900100Kit Frame neck cup, Bearings, dustshield kit
900095Kit Frame neck cup bearings – set
F1091 Stainless steel splashgard • See our range of budgetpriced 6 speed transmissions
• Order your tyres andsuspension from us
• See our large range ofAluminium & Steel Gas Tanks- For advice on fitment,please give us a call
• You may need some offsetparts...See our range ofoffset parts in the 'BigWheel' section
• See our range of exhaustsystems to complete yourcustom bike.
Telephone: UK 01424 83054284
frames and chassis
HogTech Frames Frames are important, they are like thefoundations of a house.They help todictate the style you want to achieve andbring integrity and strength to the finishedbike. Hogtech have been making framesfor many years and you can see fromtheir innovative frame jig that they areserious about what they are good at.
Frames are made in the Swedish style andthese offer some of the smoothestlooking and well built pieces of kit on themarket today.They are amongst thehighest quality available.The picturesspeak for themselves!
Tolle Forks
www.harleycustom.com 85
frames and chassis
Northern SpiritFrame Kit®
with TUV• For Evo and TCB engines
• Made in 30mm od x 3mm wallthickness & 40mm od x 4mm wallthickness tube
• Smooth steering neck with built inbearing cups and hidden forkstop
• Axle mounts in stainless steel withaluminium covers
• Support tubes between centre tubeand seat tube
• Includes rear axle
• Bracket for lower triple tree (hiddenforkstop)
• Frames take up to 200mm tyre withchain and 180mm tyre with 1.5” belt asstandard
• Rake up to 50 deg & +4in stretch infront tubes
• Foot control mounts as per FXR (2 holes) Use weld on kickstand
• Order your choice of rake/stretch
• 50 deg+ rake, +10in stretch top tube,up to 20in stretch in front tube & anysize tyre – special order
Twin Cam®
Evo
Telephone: UK 01424 83054286
frames and chassis
HOG2502 Northern Spirit RigidFrame, including axle &forkstop – Knuckle, Pan
HOG2503 Northern Spirit RigidFrame, including axle &forkstop - Shovel
HOG2504 Northern Spirit RigidFrame, including axle &forkstop - Evo
HOG2505 Northern Spirit RigidFrame, including axle &forkstop - TCB
See price list Extra rake/stretch
www.harleycustom.com 87
frames and chassis
Northern Cruiser Frame Kit®
(TUV being applied for)
• Clean and smooth frame styling
• For Evo and TCB engines(longprimarys)
• Includes swingarm
• Pivot axle CNC machined in stainlesssteel(DIN 1017) with SKF bearings andseals
• Made in 30mm od x 3mm wallthickness & 40mm od x 4mm wallthickness tube
• Foot control mounts as per FXR(2 holes) Use weld on kickstand
• Motor & transmission mounts are onframe centre line
• Use shocks for Softail‚ 89-up
• Order your choice of rake/stretch
• Absence of fender strut mounting holesallows fender to be welded on for thatclean integrated look
• 50 deg+ rake, +20in stretch toptube, up to 20in stretch in fronttube & any size tyre – specialorder
• Smooth steering neck with built inbearing cups and hidden forkstop
• Axle mounts in stainless steel withaluminium covers
• Rear transmission mount laser cut inextra heavy (8mm/5/16”) steel
• Support tubes between centre tubeand seat tube
• Includes rear axle
• Bracket for lower triple tree(hiddenforkstop)
• Frames takes up to 240 tyre
• Rake up to 50 deg & +4in stretch asstandard
Telephone: UK 01424 83054288
frames and chassis
• See our range of quality budget priced 6 speed transmissions
• Order your tyres & suspension from us
• See our large range of Aluminium & Steel Gas Tanks - For advice on fitment, please give us a call
• You may need some offset parts - See our range of offset parts in the 'Big Wheel' section
• See our range of exhaust systems to complete your custom bike.
HOG2500 Northern Cruiser, including Swingarm/pivot axle kit/rear axle/forkstop - Evo
HOG2501 Northern Cruiser, including Swingarm/pivot axle kit/rear axle/forkstop - TCB
HOG2506 Oil Tank – Aluminium
Extra rake/stretch - see price list
New Design Swingarm with taperroller bearings and seals.This is theonly Softail frame available with anefficient Swingarm.
www.harleycustom.com 89
frames and chassis
001222 Softail suspension units black – Twin cam 2000up
DN9011 Softail shock Chrome/adjustable 84-99 - set
Fournales
Special Fournales shocks for Softail‚models.They feature a unique twochamber construction by which the rideheight can be adjusted from stock heightto 4cm/1-1/2” lower.The damping is simplyadjusted at the main body valve by varyingair pressure using the special air pump.
Fournales Air Pumps
The high operating pressure of Fournalesoil-pneumatic shocks requires thesespecial Fournales air pumps for thecorrect adjustment.They can reach
pressures up to 35 bar which is enoughfor the heaviest bikes. Each pump includesa mounted pressure gauge.
F8000 Pan Cruise (pair) - Black - 84/99
F8001 Pan Cruise (pair) - alloy silverfinish 84/99
F8002 Pan Cruise (pair) - alloy silverfinish 2000up
F8003 Springer Air Suspension - alloybody silver/black colours
F8004 Compact Air pump
Air Ride Suspension This complete kit will lower your backend by 1inch and raise it by 5 inches atthe touch of a button. Comes withmounting kit to bolt onto your bike.
ARH9049 Air ride suspension incmounting kit - Softail up to 1999
ARH9050 Air ride suspension incmounting kit - Softail from2000 up
001221 Softail suspensionunits chrome – Evo 89-99
001223 Softail suspensionunits chrome –Twin cam 2000up
001225 Softail Lowering Kit - Evo 89-99
001226 Softail LoweringKit - Twin Cam2000up
001229 Softail suspensionscrew kit - Evo 89-99
001230 Softail suspensionscrew kit - TwinCam 2000up
001228 Softail suspension spring spacer-Evo/TC - pair
Rear Suspension Systems
When you order your frame, order yourtyres at the same time... from us.
We can supply any tyre made for anymotorcycle. From fat to thin and from smallto very large.
Don't forget, before you design your bike orbuy the parts, decide what tyres/wheels youwant to use and ensure they are availablefor you to buy. See the tyre advice.
top related