feasibilty report san deep 2003...sandeep gupta
Post on 30-May-2018
223 Views
Preview:
TRANSCRIPT
-
8/14/2019 Feasibilty Report San Deep 2003...sandeep gupta
1/18
MANUFACTURING OF WRIST BOTTLE
NIMT B SCHOOL
Submitted to:
Proff. Jyoti shukla
PRESENTED BY:
SAND
EEP GUPTA
BATCH 1st
ENR 28753
SANDEEP GUPTA
-
8/14/2019 Feasibilty Report San Deep 2003...sandeep gupta
2/18
ACKNOWLEDGEMENT
I am SANDEEP GUPTA a student of PGDBM in NIMT B
SCHOOL (GHAZIABAD).I would like to thanks professor
JYOTI SHUKLA who help me in completed my project
report.They provide me all information about my report.It
has been a great experience working under him.she has
been a source of inspiration and knowledge to me during the
making of report.
SANDEEP GUPTA
-
8/14/2019 Feasibilty Report San Deep 2003...sandeep gupta
3/18
SUMMAR Y
1.INTR ODUCTION2.OVER VIEW3.FEASIBILITY AN ALYSIS4.TECHNOECONOMIC AN ALYSIS5. PROJECT DESIGN & NETW ORK6. INPUT AN ALYSIS7.FIN ANCIAL AN ALYSIS8.SOCIAL COST BENEFIT AN ALYSIS9. SUGGESTION & RECOMMEND AION10. CONCL USION
SANDEEP GUPTA
-
8/14/2019 Feasibilty Report San Deep 2003...sandeep gupta
4/18
INTRODUCTION
My project on the manufacturing of WRIST
BOTTLE. The objective of this project is to
determine the feasibility of the plant. I have
collected data from many companies. The purposebehind my project is that there have some problem
those people who go for jogging & sport persons,
they feel thirsty and lack of glucose in body. They
cannot have a bottle with us. I examined the problem
and think about the project. A company called
Hydro sport help in collecting the information.
THIS BOTTLE FIT ON THE WRIST DESCRIBE AS A
WRIST WATER BOTTLE.
SANDEEP GUPTA
-
8/14/2019 Feasibilty Report San Deep 2003...sandeep gupta
5/18
FEASIBILITY ANALYSIS
Idea generation:-
The idea comes from the need of the sports person & that
person going for jogging. They face many problem related to
water & glucose water.
Market research:-
Wrist bottle is become a necessary thing in daily life.everybody want which help in provide comfortably in
jogging time.
STRENGTH
Existing demand
The labor is cheaplyavailable in main
location
High margined
Low investment, high
profit
WEAKNESS
Business is highly labouroriented
It require training of labor
SANDEEP GUPTA
-
8/14/2019 Feasibilty Report San Deep 2003...sandeep gupta
6/18
OPPORTUNITIES
There is already exist a
market which cal be further
explored.
Existing in to international
market
THREATS
Large no. of competitors
Depend on labour
DATA COLLECTION:-
I collected data from other many compaies. I
collected information
INVESTMENT SIZE:-
Rs. 8O0,000
Feasibility:-
This project is fully feasible. The size of investment
is not more lage.all the factores related to theproduction show feasibility.
SANDEEP GUPTA
-
8/14/2019 Feasibilty Report San Deep 2003...sandeep gupta
7/18
NAME OF COMPANY.. GUPTA ENTERPRISE
PRODUCTS:-
WRIST BOTTLE
NAME OF PRODUCT:-
JOY WRIST BOTTLE
OWNER OF THE COMPANY MR.SANDEEP GUPTA
LOCATION OF MANUFACTURING MANESAR(GURGAON)
AMOUNT INVESTED 600,000+200,000(LOAN)
TECHNOECONOMIC ANALYSIS
SANDEEP GUPTA
-
8/14/2019 Feasibilty Report San Deep 2003...sandeep gupta
8/18
MACHINES ARE USED:-
INJECTION MOLULE MACHINE
STRETCH BLOW MODLING MACHINE
INSTALLATION OS MACHINE:-
THESE MACHINES ARE INSTALLETED AT THE
MAIN LOCATION MANESAR(GURGAON) BY THE
HIGH SKILLED PERSON.
RECRUITMENT:-
THE RECRUITMENT REQURIED IS FOR TOTAL
25 WORKER.SOME ARE TECHNICAL PERSON
WHO OPERATE MACHINES & EQUIPMENTS.
INSURANCE:-
THE INSURANCE OF THE LABOURES HAS BEEN
TAKEN BY GOVERNMENT.CITIBANK HAS BRANCHIN INSURANCE SECTOR OFFERED TO INSURE
COMPANIES ASSETS.
PROVISIONAL RESISTRETION:-
WE REGISTRED OUR COMPANY UNER THE SMALL
& LARGE SCALE INDUSTRY ACT,1965.
SANDEEP GUPTA
-
8/14/2019 Feasibilty Report San Deep 2003...sandeep gupta
9/18
WRIST BOTTLE
SANDEEP GUPTA
-
8/14/2019 Feasibilty Report San Deep 2003...sandeep gupta
10/18
INPUT ANALYSIS
REQUIRMENT OF RAW MATERIAL:-
ETHELENE
POLYVINYL CHLORIDE
POLYPROPLINE
POLYSTYRDENE
RESIN
METHOD\PROCESS OF PRODUCTION OF BOTTLE:-
There are basically four types of blow molding used in theproduction of plastic bottles, jugs and jars. These four types are:extrusion blow molding, injection blow molding, stretch blowmolding and reheat and blow molding. Extrusion blow molding isperhaps the simplest type of blow molding, whereby a hot tube ofplastic material is dropped from an extruder and captured in awater cooled mold. Once the molds are closed, air is injectedthrough the top or the neck of the container; just as if one wereblowing up a balloon. When the hot plastic material is blown up
and touches the walls of the mold the material "freezes" and thecontainer now maintains its rigid shape. There are various typesof shuttle, reciprocating and wheel style machines for theproduction of extrusion blown bottles. Shuttle or reciprocatingtype machines can be used for small, medium and high volumeproduction with wheel machines being the most efficient for hugevolume production of certain resins.
Injection blow molding is partinjection molding and part blowmolding. With injection blowmolding, the hot plastic material isfirst injected into a cavity where itencircles the blow stem, which isused to create the neck andestablish the gram weight. The
SANDEEP GUPTA
-
8/14/2019 Feasibilty Report San Deep 2003...sandeep gupta
11/18
injected material is then carried to the next station on themachine, where it is blown up into the finished container as in theextrusion blow molding process above.
Injection blow molding is generally suitable for smaller containersand absolutely no handle ware. Extrusion blow molding allows fora wide variety of container shapes, sizes and neck openings, aswell as the production of handle ware. Extrusion blown containerscan also have their gram weights adjusted through an extremelywide range, whereas injection blown containers usually have a setgram weight which cannot be changed unless a whole new set ofblow stems are built. Extrusion blow molds are generally muchless expensive than injection blow molds and can be produced ina much shorter period of time.
Product size:-
Product are available in various size..
100 ml.
150ml..
250ml..
SANDEEP GUPTA
-
8/14/2019 Feasibilty Report San Deep 2003...sandeep gupta
12/18
COST BEBEFIT ANALYSIS
The below given is the projection report for the
year of commencement of business.
SANDEEP GUPTA
-
8/14/2019 Feasibilty Report San Deep 2003...sandeep gupta
13/18
SANDEEP GUPTA
PARTICULARS
NO.
OF UNITS PER UNIT
EXPENSE
S
RAW MATERIALS
Ethelene 500 100 50,000
Polyvinyl chloride 1,000 80 80,000
polystrydene 500 100 50,000
WAGES 20,000
INSTALLATION CHARGES 10,000
PRIME COST 2,10,000
FACTORY OVERHEADS
Machinery
Injection modeling machine 1 100,000 100,000
Stretch blow modeling 1 150,000 80,000
OTHER IN DIRECT EXPENSES 20,000
FACTORY COST 4,10,000
PLANT
Other expenses
200,000
20,000
SUNDRY EXPENSE 10000
COST OF PRODUCTION 640000
SELLING AND DISTRIBUTION 30000
COST OF SALES 6,70,000
-
8/14/2019 Feasibilty Report San Deep 2003...sandeep gupta
14/18
This analysis conclude that:-
The above figure clear that the cost of production is less than the
investment. So we conclude the the business of productin of wrist bottle is
beneficial for us.
SUGGESTIONS AND RECOMMENDATION
This product is useful for each age people like child, young & old
age.
Reliable in use
Affordable cost
Comfortable in use
Due to the lack of glucose in our body there are many diseases
generate in our body.
SANDEEP GUPTA
-
8/14/2019 Feasibilty Report San Deep 2003...sandeep gupta
15/18
If we keep the wrist bottle with us we have no any problem
related with water or glucose water, because body accept water
at the time of work out.
SANDEEP GUPTA
-
8/14/2019 Feasibilty Report San Deep 2003...sandeep gupta
16/18
FIANACIAL ANALYSIS
Estimating cost of project:-
I will invest near about Rs. 8,00,000
Estimating operating cost:-
Rs.700, 000
Availability of Fund:-
After collection of required fund I commence my business. There are many
sources of funds have for partner in my business.
Sandeep Gupta .450,000
Amit Yadav..150.000
LOAN REQUIREMENT
Capital Investment 6,00,000
Cost of Sales 6,70000
requirement for General Reserve 130000 8,00,000
LOAN REQUIREMENT
200,000
SANDEEP GUPTA
-
8/14/2019 Feasibilty Report San Deep 2003...sandeep gupta
17/18
On the basis of feasibility report & above the given table there is a
requirement of rs. 200,000/- for which I have applied for a loan in
Citibank.
CONCLUSION
After the feasibility analysis and other important analysis
I conclude that the plan production of wrist bottle is
totally feasible. It is a beneficial project. This projectshows 70,000 as a profit.
Since there is a availability of funds and thus as a
company we do not need a loan from the bank.
Also in the following year the sale are expected to grow.
SANDEEP GUPTA
-
8/14/2019 Feasibilty Report San Deep 2003...sandeep gupta
18/18
For any quarry and project reports call me at
9711387393.summer training reports
SANDEEP GUPTA
top related