fd7 - ferruz · fd7 axles & tyres. tyres aljura agricultural tyres are designed for optimum...
Post on 07-Jun-2020
37 Views
Preview:
TRANSCRIPT
Fd7AXLES & TYRES
TYRES ALJURA agricultural tyres are designedfor optimum performance under all working conditions. They are best suitable for agricultural and forestry jobs with occasional on road driving.Before using these tyres for any other application the manufacturer should he consulted.
LOAD fr INFLATION PRESSURE : The tyres should not be overloaded 8 should not be driven over inflated or under inflated, Correct inflation pressure should be used depending upon the load on the tyre.
For industrial use or for on the road applications, an inflation pressure of 1.4 bar (2Qpst) should be maintained for tractor drive wheel tyres, even when the load is insignificant.
Inflation pressure should not be lower than 1.1 bar (16 psi) for field application, However, i f any specific operation requires a lower pressure, it should be raised back to the norma!pressure after completing the specific task.
RIMS fr TUBES : Always use the recommended rim size.
Always use a new tube along with a new tyre. Tube size should be identical to tyre size. For tractor drive wheels use an A ir ■ Water valve tube.
L yt i¡ M 'l i p 1tL ' é
■ * 1 'i m- , «1 # Z f ir 1
H i f 1 9
MOUNTING & DISMOUNTING : Always practice correct mounting and dismounting procedures. After mounting the tyres inflate it to seat the beads Wen deflate it completely and re-mflate with recommended operating pressure.
Never inflate tractor drive wheel tyres beyond 2.5 bar (35 psi) while seating the beads.
TYRE SELECTION : Selection o f the tyre size and Ply Rating on each axle should be based on the highest individual wheel load when the vehicle is weighed statically. Maximum load per tyre should not be greater than thal speci fied in the applicable table.
For sustained high torque service on tractors operating in the field the drive wheel tyres must be selected to withstand the maximum pull o f the tractor under operating service.
ALTURA drive wheel tyres are designated as A8 tyres Ioperating speed40 krnph)
AXLES &TYREsH E ROAD &à*
LOAD & INFLATION PRESSURE : To obtain best results from the tyres correct inflation pressures has to be maintained at all times. It is recommended to check the inflation pressure after long breaks or on weekly basis. If due to heat build up the inflation pressure exceeds additional 1.0 bar (15psi) the load or driving speed has to be lowered.
Load and inflation pressures for the OTR tyres should be determined according to the length o f the haul (given in the tables)
MOUNTING £r DISMOUNTING : Always practice correct mounting and dismounting procedures taking all safety measures.
DIMENSIONS : All the dimensions and the tolerances in this catalogue are based on nominal T& R A and ETRTO standard
INDUSTRIAL TYRES :ALTURA o ff road tyres are designed for mining, road construction, timber hauling, material handling, port applications and other industrial & construction jobs. Before using them for any other application the manufacturer should be consulted. Wrong selection of tyre, im proper handling, poor maintenance and improper driving habits can reduce tyre life.
■- ' n
RIM WIDTH WIDTH CCCE) SECTION WIDTH IB!
TYRE DESCRIPTION AND SIDEW ALL MARKINGS
Travel direction in case of directional tread design:
Safety warning
Tubeless - Tyres without tube.
(^y Drive wheels
( j+ Free rolling wheels.
LOAD INDEX & SPEED SYMBOL : According to ETRTO (The European Tyre and Rim Technical Organisation), as well as to ECE {Economic Commission for Europe-UN Institution Geneva), the maximum load capacity, as well as the maximum speed are indicated by Load Index and Speed symbol.
LoadIndex
LoadKg
LoadIndex
LoadKg
LoadIndex
LoadKg
LoadIndex
LoadKg
102 850 129 1850 156 4000 183 8750103 875 130 1900 157 4125 184 9000104 900 131 1950 158 4250 185 9250105 925 132 2000 159 4375 186 9500106 950 133 2060 160 4500 187 9750107 975 134 2120 161 4625 188 10000108 1000 135 2180 162 4750 189 10300109 1030 136 2240 163 4875 190 10600110 1060 137 2300 164 5000 191 10900111 1090 138 2360 165 5150 192 11200112 1120 139 2430 166 5300 193 11500113 1150 140 2500 167 5450 194 11800114 1180 141 2575 168 5600 195 12150115 1215 142 2650 169 5800 196 12500116 1250 143 2725 170 6000 197 12850117 1285 144 2800 171 6150 198 13200118 1320 145 2900 172 6300 199 13600119 1360 146 3000 173 6500 200 14000120 1400 147 3075 174 6700 201 14500121 1450 148 3150 175 6900 202 15000122 1500 149 3250 176 7100 203 15500123 1550 150 3350 177 7300 204 16000124 1600 151 3450 178 7500 205 16500125 1650 152 3550 179 7750 206 17000126 1700 153 3650 180 8000 207 17500127 1750 154 3750 181 8250 208 18000128 1800 155 3875 182 8500 209 18500
SpeedSymbol
SpeedKm/h
A1 5A2 10A3 15A4 20A5 25A6
OCO
A7 35A8 40B 50C 60D 65E 70F 80G 90J 100K 110L 120M 130N 140P 150Q 160R 170S 180
The LOAD INDEX is a numerical code associated with the maximum load a tyre can carry at the speed indicated by its Speed Symbol under service conditions specified by the manufacturer.
The SPEED SYMBOL indicates the maximum speed at which the tyre can carry a load corresponding to its Load Index under service conditions specified by the manufacturer.
RMA INDUSTRY CODESThe Tyre and Rim Association has approved the following tyre designations for agricultural tyres, regardless of manufacturer.
C O D E I N D U S T R Y T Y R E T Y P E T Y R E S E R V IC E
Front Tra ctor Tyre sF-1 Agricultural single rib tread Rice farmingF-2M Agricultural multiple-rib tread General farmingF-2 Agricultural multiple-rib tread General farmingF-3 Industrial multiple-rib tread Light industrial serviceF-2D Aaricultural dual rib
Drive Tra ctor Tyre sR-1 Drive wheel, regular tread General farmingR-1W Drive wheel, wet traction tread Wet or moist soilR-2 Cane and Rice, drive wheel, deep tread Wet muck, Sugar cane. Rice farmingR-3 Drive wheel, shallow tread Sandy or volcanic ash soils, Orchards,
Highway mowing, Golf course work, Light industrial service
R-4 Industrial tractor, drive wheel, Light industrial service,intermediate tread Highway mowing
Flotation TyresHF-1 High flotation, rib tread Golf course workHF-2 High flotation, regular lug tread General farmingHF-3 High flotation, deep lug tread Wet or moist soilHF-4 High flotation, extra deep tread Swamp land
Garden Tra ctor TyresLug Type Gardens
Im plement Tyres1-1 Rib tread Free rolling wheelsI-2 Moderate traction implement Drive or free rolling wheelsI-3 Traction tread Drive wheelsI-6 Smooth tread
‘0’ RING SPECIFICATION
O' R ING CODE APPLICA TIO N TYRE SIZE (ONLY for
TUBELESS Tyres)
O' R ING SPECIFICATIONDESIGN
IN TER N A LD IA -A ( ± 5 )M M
DESIGNEXTERNAL
D IA -B (± 5 )M M
DESIGN SECTIONAL
D IA -D ( + 0 .3 ) M M
OR 25 T14.00-2517.5-25(G2/L2,E3/L3,L5S)
584.2 596.9 6.35
OR325 T16.00-2518.00-2521.00-2520.5-25 (G2/L2/E3.L3)23.5-25 (E3/L3)26.5-25 (E3/L3)
576.6 595.9 9.65
OR 333 T 18.00-33 772.2 791.5 9.65
OR 335 T 21.00-35 812.8 832.1 9.65
7
AXLES & TYRES
OFF THE ROAD TYRE INDUSTRY GODES 1■’ M A XIM U M
CODE SPEED DISTANCENUM BER TREAD TVPE TYPE OF SERVICE (KM PH ) (O NE WAY)
C-COMPACTORC-1 1 Smooth Compactor 8 Unlimited
ComDactor 6 Un'imiied 1E-EARTHM O VINGE-1 Rib Regular Haulage 6 4 4 KmE-2 Traction Regular Haulage 64 4 KmE-3 Rock Regular Hauiage 64 4 KmE-4 Rock Deep Tread Haulage 64 4 KmE-7 Floatation Haulage 64 4 Km0 4 R A D E RG-f Rib Regular Grader 40 UnlimitedG-2 Traction Regular Grader 40 UnlimitedG-3 Rock Regular Grader 40 UnlimitedG-4 Rock Deep Tread Grader 40 Unlimited
I L-LOADEIÏ AND DOZERL-2 Traction RBgular Loader Do iter 8 76 MirL-3 Rock Regular Loader Dozer 8 76 MirL-4 Rock Deep Tread Loader, Dozer 8 76 Mir.L-5 Rock Extra Deep Tread Loader. Dozer 8 76 MirL*3S Smooth Regular Loader Dozer 8 76 MirL-4S Smooth Deep Tread Loader. Dozer 8 76 Mir.L-SS Smooth Exlra Deep Tread Loader. Dozer 8 76 Mir
8
GENE
RAL
INFO
RM
ATIO
N
USE PROPER INFLATION PRESSURENever under inflate or over inflate the tyres.
• Under inflation causes excessive flexing o f the tyre sidewall and increases the internal tyre temperature. It can cause severe tyre damage such as casing break up, radial cracks, separation.
• Over inflation reduces the tyre contact area with the ground. This results in uneven tread wear ( tread centre wears faster than shoulder). In soft or loose soil applications over inflated tyre provides less floatation and traction and wastes engine power. Also over inflation makes the tyre more vulnerable to cuts, snags and impact failures.
• Inflation pressure should be checked after allowing the tyre to cool down to the ambient temperature.
• Never lower the inflation pressure by during operation by "bleeding" (letting some air out o f the tyre to reduce pressure), since it increases heat build up and can cause premature tyre failure.
• The only way to reduce excessive pressure due to heat build up is to reduce load or speed or both.
• Coverall the valves with cap to prevent penetration o f dirt.
DON'T OVERLOAD THE TYRES :To obtain maximum tyre life, operate within the recommended load inflation pressure schedule. For OTR tyres Load and inflation pressure should be determined according to the length of the haul (given in thetables).
SPEED & LENGTH OF THE HAUL :CEAT agricultural tyres are designated for A8 speed rating (40 kmph). However the Load Carrying capacity at various speeds given in the product catalogue for different product range as a guideline which should be strictly followed by the customers/end users. For any kind of violation from the Load, Speed and Inflation pressure table, consult the tyre manufacturer.For OTR tyres load, inflation pressure, speed of the vehicle and the length of haul are very closely related. The Load carrying capacity varies with the vehicle operating speed and the length of haul which are mentioned in the product catalogue.
BAD HAUL ROAD:This is particularly applicable for OTR tyres since they operate on temporary road which sometimes does not get proper attention and maintenance. The haul road should be kept clean from spillage and any sharp object embedded in the road should be removed. Water accumulation on the haul road should be avoided through proper drainage and a optimum road gradient should be maintained while preparing the road. Maintenance of Loading and dumping areas are also equally important. Proper maintenance of haul road is essential for iongertyre life.
PROPER DRIVING :To get the maximum service from the tyre, specially the OTR tyres, it is essential to adopt proper driving habits. Vehicle operators should avoid chuck holes and other obstacles (due to load spillage etc.) which can damage the tyre and refrain from strong spinning, sudden and excessive braking, high speed cornering, locking one wheel for sharp turns etc. All these may harm the tyres and shorten their service life,
IMPORTANT PARAMETERS FOR MAXIMUM TYRE LIFE :Following are some important parameters needed to be monitored in order to get maximum tyre life :
* Sufficient tyre to vehicle clearance
* Removal of entrapped Stones between dual tyres or between tyre and the vehicle or in the grooves of the tyre.
* Proper matching of dual tyres, that is the inflated diameters of both the tyres should match.
* To keep the tyres free from oil, grease etc.
* To keep proper tyre performance record. This includes :
i) Brand and serial no.
ii) New tyre non skid depth
iii) Original and subsequent installations and removals by unit number and position
iv) Final disposition - scrap, repair, retread, total hours or kilometers of service and date of removal.
Thorough and accurate record keeping helps in determination of problem areas causing failures.
* Proper attention to be given for vehicle mechanical irregularities such as misalignment, improperly adjusted brakes or defective brake drums etc. which have damaging effect on tyres.
* Proper checking & maintenance of Rims or wheels and valves
* Proper Storage of tyres. Tyres should be stored in cool and dark places, free from dirt, oil or sunlight and as far as possible from running electric motors (as these generates ozone which deteriorates rubber.
* Prompt repair of service damaged tyres. There are usually three major typesof cuts or damages which occur, particularly in OTR tyres,
i) Tread surface cuts - this type of cuts might look minor, but they have a tendency to pick up and hold stones. If the stones are not removed, they can work their way into the carcass resulting in tyre failure
ii) Cuts through the tread - damage from this type of injury may lead to premature tyre failure. When it is determined that the carcass of the tyre has been damaged, the tyre should be removed from service immediatelyand send to a qualified repair facility.
iii) Sidewall cuts - these are repairable depending on the iocation and extent of damage.
1 0
TYRE
CARE
&
MAIN
TENA
NCE
GUID
ELIN
ES
Fd7AXLES & t y r e :
BALLASTING :To achieve better traction and to enhance performance often the tyres are ballasted. Ballasting can be done in two ways :
• Inserting substances inside the tyre
• Attaching counterw eightstothebackofthevehicle.
Since the second method involves welding or bolting weights to the back of the vehicles, many operators choose tyre ballasting instead. This practice is used to enhance the performance of front -end loaders, motor graders and farm tractors. Ballasting keeps the Reartyres of the front-end loaders grounded.
Ballasting is usually done by filling tyre with water. In cold climatic conditions required amount of anti freezing substances like Calcium Chloride (80%)or Magnesium Chloride (47%) can be added.
However the following points must be taken into consideration while using tyre ballasting practice:
• Before rotating ballasted tyres the ballasting solution (liquid) or material (dry) must be removed and properly disposed off.
• Ballasting solution can facilitate rim rust. Hence, the rim should be well painted or the solution must contain rust prohibitive ingredients.
SERVICE CONDITIONS
1) Earthmover (Haulage)-A haulage cycle where equipment self-loads or receives a load from loading equipment, then transports this load to another location and returns unloaded. Transportation usually occurs over unimproved surfaces at speeds up to 65 km/h (40 mph) and short distances, up to 4 km (2.5 miles), one way. Equipment in this category is mainly haulage trucks and scrapers.
2) Loader-A work cycle where the equipment is used to pick up material and relocate it a short distance away Tyre loads fluctuate depending on the conditions involved when the equipment picks up the load. Transportation speeds are low, up to 10 km/h (5 mph), and distances are short, a maximum o f 76 m (250 feet), one way
3) Load and Carry - A work cycle where equipment primarily intended for loader service picks up a load and transports this load to another location and returns unloaded. Transportation usually occurs over unimproved surfaces at low speeds, up to 25 km/h (15 mph), and rather short distances, up to 600 m (2,000 feet). Equipment in this category consists mainly o f loaders, log stackers and material handling equipment.
4) Dozer - A working condition where equipment is used to move materials (usually earth) by pushing, dragging or grading. Tyre loads are relatively constant and speeds are low, up to 10 km/h (5 mph). Travel distances vary depending on work situations.
5) Grader - A working condition where equipment is used in construction and road maintenance. . Tyre loads are relatively constant during the work cycle. Equipment speeds are slow' during working periods with maximum transportation speeds reaching 40 km/h (25 mph). Travel distances vary depending on work situations.
6) Creep - Movement of equipment at very slow speed (not over 60 m (200 feet) in 30 minutes). During creep motion, loads on the tyres are very high and consideration must be given to the type o f surface over which the equipment is traveling.
7) Drive Away - This is a term used to define movement o f a vehicle from one location to another under non-working conditions. This movement occurs during transportation of equipment from site to site LOAD/SPEED/DISTANCE TABLES, are not applicable for drive away condition.
8) Smooth Floors and Runways - These are defined as paved or protected operating surfaces which are free o f undulations, obstructions or discontinuities.
9) Maximum Speed - The peak speed attained by the vehicle during any part o f a cycle (loaded or unloaded).
10) Industrial Vehicle - Consists o f usage on vehicles such as counterbalanced lift trucks, container handlers, straddle carriers, aircraft tow tractors, mobile crushers, log stackers and rough terrain fork lifts.
1 2
I
DEFIN
ITION
OF
TERMS
FOR
OFF
RO
AD
TYR
Dumpers (E3 4 E4; Dumpers (E3 & E4> Dumpers (E3 & E4)
Dumpers {E3 & E4; DLmpers (E3 & E4)
E A R T H M O U E R T Y R E S
Tough tyres specially engineered forthe toughest
operation conditions. Thanks to 35 years long
experience in mining & logging category ALTURA
OTR tyres are today one of the major tyre
suppliers to Lhe Indian mines and ports. The thick
sidewall and undertread offers high resistance to
ex terra'll damages. Specially designer "noul li r d
cut resistant! compound and a cooler running
base compound ensures a long service life.
Robust nyion casing hbbSts the durability and
offers multiple retreads, thus provides an
excellent return on your investment.
Tread fese Low heat build up + -------
treat! Cap optimum traction, heat 6 cut resistance ^ _
Extra thick sidewall Weather resistant tormilation ■*
Strong Nylon cosing with superior carcass compound 4 —
Bear! High tensile strength steel wires. JWairtJarrt# tyre / nm fitment
o TB1 ib o o
Si20
14 00 -24
14 00- 25
RunWidth
in
10.00
10.00
CATEGORY : Ê 3 / L3
GRIP MASTER NDTYPE: TUBELESS /TUBETYPE
Designed for hea^-v duty iQfes. the entire family of GRIP MASTER 1vres can support heavy loads m extreme wonting conditions.Tt'-sspee-stlv designed non directional tread ensures lnyh lioui.i ja even on the most abrasive siurf aces Aysecial ho a t , cut and Mfktfhti? rtfü-üanl comuound m aloesiiaipubic to withstand, tuts. snags and bruise*A heavy Duly nylon u s in g increase; strength and durability and promotes multiple retreads to get a.' i*cB llent return on your ¡nvestmrjn I
Rang«Height
in
dimension
SW 0D
mm
*» -
1.5 sea15.2
136353.9
1.5 30515-2
1368& Î9
SialicLoa&dRadius
mnv
to
630 24. 8
630 24. 8
RollingOcumfererce
mm
J L
4050169.4
4050 US. 4
PR
20
24
28
20
24
Trans pod ¡SO tmphjLoad cflDBOtv------ 3:----
Ma*. cart
I-.-:-, I lbs I
4625¡02005150114005600123454625>02005150114 00
28 500012*5
Irrtl Pressure bar I (p5lj
Loartrtg
MaxLead
g s ( lb s )
4.7565
5.75S3
6.509-4
4.7569
5,7593
6.5094
35001B74035DO
2094510000
220463500tS7<fO9500209451000«2204$
TQltmghjL
Inft Pressiti bar.' (p&l
7.01028-5123
9251347.01028 5123
9.25134
Tort? Kilometer per hour (ÎKPH)
120
1 «
154
123
142
154
A ll tyres con fam i to T & RA and ËTRTO StandardsNote . PLY RATING o lhe t tf ì t t i m untloned can be produced for special requirements.
>wH
CATEGORY:E3/L3
ROCK - XLTYPE : TUBELESS
• Stuidy lug design together wtlh a robust heavy duty casirvg mates m is tyre ideal fpr severe heavy duty appfications .n mining 6 quarrying.
• Sel* cleaning sturdy lugs are aesigned for bettar traction a i the same time more rubhe. ™ ihe lootpn^t eKefs better penetration resistance and excellent mileage
• A apecMi-v 'ormutated heat arm out resistant compound resists cut i and snags, and provides optirn. rn men n a vaneiy of operating conditions
H
r
Load capacity
SizeRim
W<!lhIn
FlangeHeighl
In
Unfcadetldimension
SW OD
mmin
mmin
SlatelaactedTtetfus
mmin
RollingCtftumlere/ice
mmin
PR Trattspwl ¡SD kmph]i
Max Lead
tes I (lbs}
Hi. Pressure 5âr I ¡psi}
LoMmg ¡10 kmph)
Man Ld k I
kg«/(tes)
(«H. Pressura bar i (psi)
16-00 - 25 11.25 2.D 432<7.0
U93 5 8.8
68627.0
4420174.0
32
670Ö14800
S.7SS3
1150025400
730016090
6. S94
1250027560
7.SIOS
8.75127
21 ÜÛ -25 15 3.0 58523.0
175969.3
&00,31.5
5140 202.4
40 1135026125
6.2591
2060046415
8.25120
AU iy m s c o n fo rm (g. r A RA and 1 1RTO StandardsNot et ; PLY RATING o the r than m entioned ca n be produced fo r s/fecial rs tju /ro m en ls .
CATEGORY: E3 / L3
TRAC - XLTYPE : TUBELESS / TUBETYPE
The massive heavy duty tyre for dump trucks, loaders and dozers for applications on rock, coal and log-strewn terrain. Specially designed non directional tread and wide ground contact area provides excellent grip, traction and high mileage even on most severe terrain.A special heat, cut and weather resistant compound protects the tyre from cuts and snags.
Size
17.5-25
20.5-25
23.5-25
26.5-25
Type
Tube type/ Tubeless
Tube type/ Tubeless
Tube type/ Tubeless
Tubeless
RimWidth
in
14
17
19.5
22
FlangeHeight
in
1.5
2.5
3.0
Unloadeddimension
SW OD
mmin
445Í7.5
52120.5
59723.5
67726.7
mmIn
134853.08
149358.8
161763.7
175068.9
StaticLoadedRadius
mmin
62424.6
68627.0
74029.1
79831.4
RollingCircum
mmin
3990157.1
4416173.8
4786188.4
5125201.8
PR
Load T
12
16
20
12
16
20
12
16
20
24
24
28
Max Load
Capacity kgs / (lbs)
3650805042509350500011000450099005450120006000132005300117006150136007300161008000176009250
204001000022000
Infl.
Pressure bar / (psi)
2.25333
44458229
2.7540
3.2547
1.7525
2.25333
443.5513443.551
Max Load
Capacity kgs/(lbs)
6150136007300161008250182006700148008250182009500209008000176009500209001090024000125002760014000309001550034170
Infl.
Pressure bar/(psi)
3.551
4.7569
5.75832.5363.5514.565
2.25333
443.7554
4.7569458
4.7569
TonsKilometer
per hour (TKPH)
77
91
103
84
103
119
100
118
136
156
175
198
%
>H
A ll tyres conform to T & RA and ETRTO StandardsNote : PLY RATING other than m entioned can be produced for specia l requirements.
Size
14.00-20
RimWidth
in
10
CATEGORY: E3 / L3
TRAC - XLTYP E : TUBETYPE
The massive heavy duty tyre for side dump trucks, loaders & for applications on rock, coal and log-strewn terrain. Specially designed non directional tread and wide ground contact area provides excellent grip, traction and high mileage even on most severeterrain.A special heat, cuts and weather resistant compound protects the tyre from cuts and snags.
FlangeHeight
2.0
Unloadeddimension
SW
mmIn
38215.0
OD
mmin
126649.8
StaticLoadedRadius
mmIn
58323.0
RollingCircum
mmin
3750147,6
PR
22
Transport (50 kmph)Load capacity
Max Load
Capacity kgs I (lbs)
5.580
Infl.
Pressure bar / (psi)
43659625
Loading
Max Load
Capacity kgs I (lbs)
823018145
10 kmph)
infl.
Pressure bar / (psi)
8.5125
H
A ll tyres conform to T & RA and ETRTO StandardsNote : PLY RATING other than m entioned can be produced fo r specia l requirements.
CATEGORY: E4 / L4
ROCK - XLTYPE: TUBELESS
Deep Tresa and a a u /dy lug design together w ith a robust heavy duty caomg mattes, this tyre ideaUor severe hea'<y duty applications*« mining, i}uflrryi>.g a-~*d rack excavation opera [ionsSe-I cleaning sturdy luprs. ;iro designed lor bettor tTaclran at ihe sorfo time more Jobber in tuo 'cotp-'nt otler'i tjaltc"fjftriettittinn re$iM«nced’"<le*cel,ew rnlMwseA specially tormuifm'iii heat ¡inn cuts rwfstgrie« compound resists cuts and snags and prwids* optimum wear in n vanety of operating conditions.
Stitt
18.00-26
18.00-33
21 ,00-35
RimWidth
n
11 oo
13
15
FlangeHeght
z.s
2,5
3,0
Unloadeddimension
sw
mm
49619.6
49 a (0 6
595234
00
mmin
SialicLoadedRadius
mmIn
1673 ?6465.Ö 30.1
1B77 36673.9 34 1
205280S
953 37 5
2175 99685-8 39 3
RailingCircum
nwtin
4952fSS.O
5556 218 7
&125241
PR
32
4D
32
36
40
36
40
Load
Max Lead
kgs I íibsi
6750193003750
21S001030022700106002337011200
2469012850233301400030865
iryrLcori ;50'»m¡*i
Indi.Pressureîsar.'{psij
5.7563r.o102
5.7563
6.25OO7,01025,560
6.259T
Ma*Lead
kgs.'ilbs)
1500033TÜ017D003/4SO17500386ftJ18500374301950042S90230005Q7Q52430053570
loll. Pressure ban ipso
7.5T099.5138
>g H
7.5Í098.51239.5T387.5110
8,25120
138
193
204
25*
200
All lyres conform to T & HA and ETH70 StandardsNate j PLY RATING other than m entioned can fre produced lo r special requirements.
CRIP M A S TE R XL
CATEGORY:£ 4 / L4
GRIP MASTER XLTYPE : TUBELESS / TUBETYPE
■ I ,rr.1 t lw n Ue.jU ,tnd .1 robust inu ;.iuU i in&kc-j th ■ 'y in Id*-<■ tor SOVnr»* 1» ivy dU'V IM|«I<<I! M Illln.nyquarrying and rock excavation operations.
■ A speedily form uiited heat a”,d LjUes-star’ tcQmpouno resists cuts and snags, and provides optimum wear m a variety of operating conditions
SizeRim
WidthIn
Fiant»Hsiÿu
tn
UMMdÛÜdlmansan Sialic
loadedRadius
RoilingCirwm
PR
Load capacity j
Tqn$ Kiltjmeler per hour ÍTKPH1
Transport (50 kmph| Loassng i0 kmph)
SW OD ManLoad
kgs1 ite )
IrtB,Pressurebarifpsi.l
MaxLoad
kgsiflbst
mnPressure bsr.' (psi'imm
inmmin
mm«
mm
18.00-25 13.00 z.s 49819.6
1673ess
764 30. J
4952195.0
32 8750T9300
5.7583
1500033100
7.5i09
160
40 975021500
7.0Í02
17000m m
9.5! 36
176
All lyres c o n fo rm la T & RA and ETRTO StandardsiVofo : PLY RATING atlto r titan maritiormd can t?o p ro fitfe e t/ fo r specia l requirements.
o
Size
13 CID - 24
14.00 - 24
RimWidih«1
s ,00
1.00
CATEGORY: G2/L2
GRADER - XLTYPE TUBELESS TUBETYPE
A sturdy, robust tyre 'o r drive wheel off '.H-d rood t-quipmer.t.Superior Uftrd fl«a sidewiaH eon-pounds w in weather a<vl OiO'ie «»M iani properties and a strong nylon casrig ensures smooth. trouble troe services in the moslseve7foper3Si'".g conditioi'.E Idea I ior use In motor gfadens as well as loaders.
FlangeHeigM
in
1.4
1,4
Unlatóedâmensiot
SW
mmin
33313.1
36214.3
00
mmin
127650.3
134B53.)
SteliCLoadedRediL'S
mm«i
RollingCirain
50222 9
3783 U S 9
61424.2
3930157.1
PR
iz
12
ie
AQkrohV i j& r jH T
MaxLoad
hgs I (lbs)
Ï7 Î56000
Jrrfl. Pressure bar i ipsi)
CE
MaxLob3
kgs I IKra)
3.044.0
30756800
2 536.0
36508050
3.551
560012350530013990730«16090
InllPressurebands')
4.565
4.25525.580
>
I -
Sire
15.5-25
17.5-25
RimWidlti
12.00
14.DÛ
CATEGORY : G2/L2
LOADER - XLTYPE: TUBELESS /TUBETYPE
A lough wdu base tyra. provide* traction as well as high f Io«t9;ponSuperior compound and a lougn casing makes ¡1 ¡a aa iio r 'jg ije d service on tans ena loader
FlangeHeight
in
1.3
1.5
UnlDBdeddimensBit
SW
nranin
394 is. s
44517,S
00
l27fl 5 0.3
•.ita511
LoadadSialicRadius
mmin
RollingCireum
mmin
59423.4
624 24 6
3760UB.B
3990157.1
PR
12
12
14
1E
toaiGRADI40fatiph I g£mph;.
MaxLoad
kgsi'fltis)
2651Í5&ÍÜ
InftPressureban'll»)
Hfcmg a r a g a
MaxLoad
kgsiflhs)
2.S36.0
290«64ÛÜ
2.02Û.0
560412345615013tìÙO
300066ÜÚ3350740Í)
2.333
570014SÜÖ
340
730016100
InflPressurat¡ari'|tbs¡
4.0Sfr.û_3.5
jf.t?4.05S
4.7569
H
Size
20.5 - 25
RimWidth
in
17.00
LOADER - XLTYP E : TUBELESS / TUBETYPE
High Floatation tyre designed for rugged, high performance service on front end loader as well as dozer applications. Wide robust tread bars are specially designed to provide maximum traction and to resist tearing and chipping.A superior cut and weather resistant compound coupled with a strong nylon casing makes this tyre ideal for use in shovel loaders, dozers, scrapers and special vehicles on building sites.
FlangeHeight
in
2.0
Unloadeddimension Loaded
StaticRadius
RollingCircum
mmin
520 1492 686 441620.5 58.7 27.0 173.8
PR
Load capacityGRADER SERVICE40kmph / (25mph)
MaxLoad
kgs/(lbs)
3550785040008800
Infl.Pressurebar/(lbs)
1.7525
2.2533
Load capacityLOADER SERVICE10kmph/(5mph)
MaxLoad
kgs/(lbs)
670014800825018200
Infl.Pressurebar/(lbs)
2.536
3.5051
A ll tyres conform to T & RA and ETRTO StandardsGRADER SERVICE ; Distance - Unlim ited (Speed : 40 kmph / 25 mph)LOADER SERVICE : Distance ■ 76m / 250 ft (Speed : W kmph / Smph )DOZER SERVICE : May vary depending on work situations ( Speed : 10 kmph / 5 mph)
>H
SOPER TRANSPORT LOGFOR USE IN INTERMITENT HIGHWAY SERVICE
These are mining and logging tyres which can also be used in intermittent highway serviceAll the patterns are designed to carry heavy loads on all types of surfaces such as rock, mud or on highwaysSpecial tread designs provide good traction and high mileage, whereas cap base construction coupled with a strong nylon casing ensure cooler running and long life.
TRAC XL
Size
10.00-20
11.00-20
12.00-24
12.00-24
Pattern
TRAC-XL
ROCK XL
ROCK XL
TRAC-XL
TRAC XL
RimWidth
in
7.57
8.0
8.5
8.5
Unloadeddimension
SW
mmin
27610.929311.532812.931512.4
OD
mmin
106442.2110643.51257 49.5124749.1
PR
18
18
20
20
ROCK XL
Infl.press
barpsi
7.251057.6110B.41227.9115
Load Capacity
26905930
H300066103975376538758540
A ll tyres conform to Standards manual o f Indian Tyre Technical A dvisory Committee (ITTAC) & T & RA NOTES : 1) These tyres are no t intended fo r susta ined H ighway service.2) Distance m ust no t exceed 90 km in any 11/2 hour period o f run.
CATEGORY: UNDERGROUND MINING
SLICK 413T YP E : TUBETYPE
Specially designed h ii undergiDU'td mines. SLICK ¿13i&capaoie to carry Load under most -is,-ere operating condi lions Spociolly form ulat'd »«’op 1rts>d, rain forced ¡»dwwMls. otter s u p r-w ««¿stance in woar 6 dumago imd enswus high mileage-Flatten tread with large tread width provides high ground contact area tor good traction
Srze ftimWteffll
in
UnScadeddintansion
PR
Lowi Capacity tor Induilræ spricatipns ion hart «nprcverf surfaces)
Inllpws;barpul
IS fcmph 10 Kmph StaticSW OÖ Ma*
Load Capacity hffsijilB l
Max Ura d Capacity
ttgs/(lbsi
Max Load
kgs M s )mmm
mmIn
12 7.1 1610 1730 2770103 3550 3315 6 JOS
7,00 -1 2 5.00K 192 883 14 7.S 1655 1780 28507 6 26-9 109 3S50 3925 625-5
16 S3 1750 BSD 3010120 3S6Û 414& 663S
9.0« - 20 7.00 259 103® IS 7.25 3690 3965 634010.2 *3-9 10S S13S S? 40 13960
>H-
A ll tyres conform fo 1TTAC. T S RA am i ETRTO Stanrfards
UNDERGROUND MINING
CATEGORY : L5 S, SMOOTH EXTRA DEEP TREAD
SLICK 404CUT RESISTANT
TYPE : TUBELESS / TUBE TYPE
Specially ttoügnod tor wppneaiions in u n a e n ro u n d m in «, heavy duty ftx ktrft* and loaders
L *:trj t lrxu ttead .vilh -jfii.icislly lo rm iiiilodcu !res is lan l rubt».* eorr.pcundarid Munlrjici-i) iidew a lb o ilr;' ..... !C - 11& wear and ensures ",igf mileageFlatter treao with large treac width provides high ground conracî ares for good tree tiüri on paved sur'ace
See TypeRim
Widthin
FlangeHeigt’-t
in
UnloadedSatie
LoadedRadius
RollingCircum
PR
Load Carrying Capacity(Mr®nston
tttfl.Pressurebar/{psj|
11} kmph i5km ch
SW ODMaxLoad
fepfflbs)
MaxLoad
kgsi(lte)mmIn
mmIn
mmIn
mmIn
S2.Ù0 - 20 Tubetvpe e.so - 31512,4
116345 8
53821 2
3433135.2
ie 6.7596
545012ÖJ5
474010450
20 7,75 f 12
6000Î3230
5220r is to
12.00-24 Tubetype 8.5 * 31012.2
1270SO
592 2.3 3
375S 14 a
20 8.25120
690015210
600013230
14.00 - 24 Tube type 10.00 1.5 37514.8
1418SS. S3
65825.9
4197T S «
24 a s125
950020945
82601S210
14.00 - 25 Tubeless 10.00 1.5 37514.8
141855.03
65825.9
4197165-2
24 8.5125
950020945
828013210
17.5-25 Tubeless u 1.5 44517. 5
1399 SS M
64825. Si
41411(33-03
20 5.7583
8250732W
7180t W O
18.00 - 25 Tubeless 13.00 2.5 498ia e
11373 65 9
76830 2
4952m e
7.5109
1 MOO33100
1305025770
8.5138
17000374SO
1473030605
5
H
A ll lyres conform to T 9. RA and ETRTO S tandards
Note : 1 > PLY RATING other than m e n tio n e d can b e produced fo r sp ec ia l requ irem ents .
MULTI PURPOSE TYRE (MPT 602)"ALTURA" branded MPT 602 tyres are designed for on the road, off-the -road and OTR servicesSpecially designed wide, diagonal lugs offer self cleaning properties, resistance to side slip and excellent traction In all weather and service conditions, for on and off road driving.
SizeRim
Widthin
Unloadeddimension Loaded
StaticRadius
RollingCircum
TYPE PR
Infl.Press,
barpsi
Load Carrying capacity
Load Index & Speed symbol
Max Speed (kmph)
Max Load (kg)
SW OD
mm mm mm mm
12.5-18 11.0 325 990 455 2910 TL 12 3.5 134 D 65 2120
10.00 - 20 7.5 280 1075 509 3255 TT 16 7.5 146 B 50 3000
12 .5-20 11.0 325 1042 480 3065 TL 12 3.5 135 D 65 2180
14 .5-20 11.0 358 1095 506 3240 TL 12 4.0 139D 65 2430
405 / 70 - 20
(1 6 .0 /7 0 -2 0 )
13.0 405 1085 500 3190 TL 14 3.5 148 D 65 3150
16 4.5 154 D 65 3785
405 / 70 - 24 (1 6 .0 /7 0 -2 4 )
13.0 405 1180 547 3470 TL 14 4.0 151 D 65 345016 5.0 157 D 65 4140
>H
A ll tyres conform to ETRTO Standards
MULTI PURPOSE TYRE (MPT 800)“ALTURA" branded MPT 800 tyres are designed for agricultural use. industrial / construction sites and other on and off road applications.Extra strong, deep lugs with double angle design provides high traction, self cleaning properties and high surface contact area for better haulage in both on and off road service.Ideally suitable for telescopic handlers and all loader applications
Size
405/ 70-20
(16.0/70-20)
RimWidth
in
13.0
Unloadeddimension
SW
405
0D
1098
LoadedStatic
Radius
505
RollingCircum
3225
TYPE
TL
PR
14
Ind.Press
barpsl
3.5
Load Carrying capacity
Load Index & Speed symbol
149 B
Max Speed (kmph)
50
Max Load(kg)
3250
A ll tyres conform to ETRTO Standards
Hr
4-
Tractor Drive wheel R3 and R4 tyres, Skid steer,
Industrial Forklift MPT and tyres for container
handling form the range. Specially designed
tread patterns, superior compound formulations
and strong nylon casings ensures optimum
tread wear, traction and trouble-free long service
Tread : High contact area Low Rolling resistance
Breaker plies lor puncture resistance
Heavy duty casing provides stability to the Tift truck m __
Bead: High tensile strength bead wires ensures proper rim/tyre fitment
Tyres can also be custom made to cater to the exact need of the customers.
Fork lift Trucks Skid Steer Loaders
Industrial Tractor Road Compactor
INDUSTRIAL FORKLIFT
ELEVETATUBETYPE
Specially designed for heavy duty service on forklift trucks, material handling and mining equipments.Alternate continuous lug with high contact area provides maximum stability and load distribution.Tough casing provides excellent durability, while superior tread compound provides greater resistance to tear and cuts.
Size Rim
Unloadeddimension Static
LoadedRadius
RollingCircum
PRLoadIndex
Infl.press
Load Carrying capacity, kg (lbs)peed, km/h (mph)
SW
mmin
OD
mmin
Lift-tn ckSide Loaders Other vehicles
Steering wheel load wheel
mmin
mmin
SpeedSym
barpsi
2516
3522
2516
3522 Static
2516
357?
106
2516
5031
6.00 - 9 4.00E 1606.3
54021.3
2459.6
159963
10PR118A5
8.5123
13202910
12202690
17203790
16503640
19904380
13202910
12202690
17203790
13202910
11102440
12PR121A5
10145
14503195
13402955
18854155
18103990
21904830
14503195
13402955
18854155
14503195
12202690
6.90 - 9 5.50K 1756.9
54521.5
2479.7
161263.5
10PR116A5
8.6125
12502750
11602560
16303590
15603440
18904160
12502750
11602560
16303580
12502750
10502310
6.50 - 10 5.00F 1777.0
58823.1
26710.5
174068.5
10PR122A5
7.75112
15003305
13903065
19504300
18754135
22654995
15003305
13903065
19504300
15003305
12602780
12PR125A5
9.0130
16503640
15253360
21454730
20604540
24905490
16503640
15253360
21454730
16503640
13853055
14PR128A5
10.0145
18003970
16653670
23405160
22504960
27205995
18003970
16653670
23405160
18003970
15103330
7 .00-12 5.00K 1927.6
68326.9
31112.2
202779.8
12PR133A5
8.5123
20604540
19054200
26805 910
25755675
31106855
20604540
19054200
26805910
2060 4540
17303815
14PR134A 5
9.0131
2120 4675
19604320
27556075
26505840
32007055
21204675
19604320
27556075
21204675
17803925
16PR136A5
10.0145
22404940
20704565
29106415
28006175
33807450
22404940
20704565
29106415
22404940
18804145
8 .25-15 6.5 2369.3
84733.3
38615.2
251599
12PR146A5
7.0104
30006610
27806120
39008590
37508260
45309980
30006610
27806120
39008590
30006610
25205550
14PR149A5
8.3120
32507160
30106630
42259315
40608940
491010810
32507160
30106630
42259315
32507160
27306010
16PR152A5
9.25134
35507825
32857240
461510175
44409790
536011815
35507825
32857240
461510175
35507825
29806570
>H
A ll tyres conform to ETRTO Standards aUSED ON CONSTRUCTION EQUIPMENT • COMPACTING DIRT - PAVING EQUIPMENT - SOIL COMPACTION
CATEGORY : COMPACTOR C-1
COMPACTOR XLTYPE : TUBETYPE
1 Improves smoothness on uneven surfaces.1 Unique tread profile to ensure uniform ground contact pressure.1 Specially formulated heat resistant compound for excellent performance even at high operating temperature. 1 Flatter tread with large tread width provides high ground contact area for good traction
Unloadeddimension
PRLoad Capacity for Industrial applications
(on hard improved surfaces)
Size Speec , 10 km/hRim SW OD SLR Infl. Pressure Max Load
WidthIn
mmin
mmin
mmin
barpsi
kgslbs
11.00-20 8.0 293 1083 492 16 7.3 54507.6 26.9 19.4 105 12000
H0)
o
qbl ¡y j-
Jp I
Size
10-1S.5 HD
12-16.5 HD
RimWidth
in
8.25
9.75
SKID STEER
GRIP MASTER LOADERTUBELESS
The most durable and versatile skid steer tyre.Superior tread compounds provide resistance to chipping, chunking and tear.
Size RimWidth
in
Unloadeddimension
LoadedStatic
Radius
RollingCircum
-ferencePly
Rating
Load Carrying capacity, kg (lbs)
Infl.pressbarpsi
Speed, km/h (mph)SW
mmin
OD
mmin
mmin
mmin
Static 105
1510
3020
8PR 4.1 2970 1880 1485 128010-16.5 8.25 264 773 358 2320 60 6550 4145 3275 2820
10.4 30.4 14.1 91.3 10PR 5.2 3375 2135 1685 145075 7440 4705 3715 3Í95
10PR 4.5 4015 2540 2005 172512-16.5 9.75 307 831 383 2490 65 8850 5600 4420 3800
12.1 32.73 15.1 98.0 12PR 5.5 4525 2865 2260 195080 9975 63J5 4980 4300
GRIP MASTER LOADER H.D.TUBELESS
Premium tyre with Increased tread depth and extra thick sidewall for improved traction and puncture resistance. Tough nylon casing provides excellent durability whereas a superior tread compound provides longer life resistance to chip and tear.Specially designed Rim Guard provides greater protection of rim flange area against damage
Unloadeddimension
SWmmin
26410.4
30712.1
OD
77330.4
83132.73
LoadedStaticRadius
35814.1
38315.1
RollingCircum-ference
mmin
232091.3
249098.0
PlyRating
8PR
10PR
10PR
12PR
Load Carrying capacity, kg (lbs)
Infl.pressbarpsi
4.1605.2754.5655.580
Recommended load, kg (lbs)
Speed, km/h (mph)Static
29706550337574404015885045259975
10
518804145213547052540560028656315
1510
14853275168537152005442022604980
3020
12802820145031951725380019504300
H(A
A ll tyres conform to T & RA Standards
Tyrock Super
INDUSTRIAL TRACTOR (R 4)
DRIVE WHEEL R4TUBETYPE/TUBELESS
Drive wheel tyres for industrial tractors with extra wide lugs gives excellent resistance to tearing and cracking.A tough nylon casing and a special tread compound gives best results on industrial use as well as o ff the road and construction sites. Tyrock 80
UnloadedStatic
LoadedRollingCircum
PRload
Load Carrying c.äpacity. kg (lbs)dimension Speed km/h (mph)
Size SW ODIndustrial Use Aqr'cultural UseRadius Index
Infl Pr. Constant load Cyclic Application Infl Pr. Road transportmm mm mm mm Speed bar 20 40 20 40 Bar 20 40in In in in Symbol psi 12 25 12 25 psi 12 25
1.5 2760 2530 3110 2530 1.5 2720 203022 6080 5570 6350 5570 22 5990 44701.7 2960 2720 3350 2720 1.6 2810 210025 6520 5990 7330 5990 23 6190 4630
8PR 1.9 3160 2900 3570 2900 1.7 2920 2180145A8 28 6960 6390 7360 6390 25 6430 4800
1.8 3050 2800 3440 2800 1.8 3060 228026 6720 6170 7530 6170 26 6740 50202 3250 2980 3670 2980 1.9 3160 2360
29 7160 6560 8080 6560 28 6960 520016 .9-28 W15L 429 1410 641 4179 10PR 2.2 3430 3150 3870 3150 2 3260 2430
W14L 16.9 55.5 25.2 164.5 148A8 32 7560 6940 8520 6940 29 7180 53502.3 3600 3300 4060 3300 2.1 3380 252033 7930 7270 3940 7270 30 7440 55502.4 3700 3390 4170 3390 2.2 3470 259035 8150 7470 9190 7470 32 7640 5700
12PR 2.6 3870 3550 4370 3550 2.4 3650 2725152A8 38 8520 7820 9630 7820 35 8040 6000
2.7 3970 3640 4480 3640 2.5 3770 281039 8740 8020 9370 8020 36 8300 6Í902.8 4050 3720 4580 3720 2.6 3850 287041 8920 8190 10090 8190 38 8480 6320
14PR 3 4220 3875 4770 3875 2.8 4020 3000155A8 44 9300 8540 10510 8540 41 3850 6610
19.5L-24 TYROCK 80
W17L 49519.5
133552.6
59223.3
3880152.7
12PR151A8
2.333
34507600
34507600
2.130
26505840
>H
Ht o
Tyrock
TYROCKTread pattern designed for very good traction and self cleaning properties.Specially designed for industrial applications for front wheels of Back Hoe Loaders, Wheel Loaders etc. Also suitable for both Free Rolling & Drive wheel Applications.
Size Riminches
OuterDiameter
mm
SectionWidth
mm
Staticloadedradiusmm
RollingCircum-ference
mm
PR InflationPressure
bar
Free Rolling Wheel Drive Wheel
Load Index Speed Symbol
LoadCapacity
(Kg)
Load Index Speed Symbol
LoadCapacity
(Kg)
1 2 .5 /8 0 -1 8 9.0 988 308 465 290010 3.1 135 AB 2180 123A8 1550
12 3.7 138 AS 2360 125A8 1650
SizeRim
Widthin
MULTI PURPOSE TYRE (MPT 800)' ALTURA" branded MPT 800 tyres are designed for agricultural use, industrial / construction sites and other on and off road applications.Extra strong, deep lugs w ith double angle design provides high traction, self cleaning properties and high surface contact area for better haulage in both on and off road service.Ideally suitablefor telescopic handlers and all loaderapplications.
Unloadeddimension
SW OD
LoadedStaticRadius
RollingCircum
TYPE PR
Infl.Press.
barpsi
Load Carrying capacity
Load Index & Speed symbol
Max Speed (kmph)
Max Load(kg)
HA ll tyres conform to ETRTO Standards
i MULTI PURPOSE TYRE (MPT 602)• ALTURA- branded MPT 602 tyres are designed for on the road, off-the-road and OTR services.• Specially designed wide, diagonal lugs offer self cleaning properties, resistance to side slip and excellent traction in all
weather and service conditions, for on and off road driving.
SizeRlm
Widthin
Unloadeddimension Loaded
StaticRadius
RollingCircum
TYPE PR
Ind.Press.
barpsi
Load Carrying capacity
Load Index & Speed symbol
Max Speed (kmph)
Max Load(kg)
SW OD
mm mm mm mm
12 .5-18 11.0 325 990 455 2910 TL 12 3.5 134 D 65 2120
10.00-20 7.5 280 1075 509 3255 TT 16 7.5 146 B 50 3000
12 .5-20 11.0 325 1042 480 3065 TL 12 3.5 135 D 65 2180
14 .5-20 11.0 358 1095 506 3240 TL 12 4.0 139 D 65 2430
405 / 70 - 20 13.0 405 1085 500 3190 TL 14 3.5 148 D 65 3150
(1 6 .0 /7 0 -2 0 ) 16 4.5 154 D 65 3785
405 / 7 0 -2 4 13.0 405 1180 547 3470 TL 14 4.0 151 D 65 3450
(1 6 .0 /7 0 -2 4 ) 16 5.0 157 D 65 4140
H
CATEGORY : 14 S (IND)
SLICK 431■ Designed to i heavy du!V forkliNa and container handling equ pments operating on hard improved surface■ Specially fornrjisted deep tread. reinforcedaidewD Is offer superior-asKtartee to wear & uamaae and ensures <ongl«fe.■ Flatter tread with large tread w id lft provides high ground conrac; area lo r good trac tion c - paveo ground
SeeRim
W<UhIn
FlangeHeijhi
In
UnloMfrJSialic
LoadedRadius
RailingCircupi PR
Lead Capacity lor Induslnal applicatone (Reach Slacterjs n * KKS»
IMI.Pressurehar'ipsn
25 kmph
MaxLoad
kg&ljlbsj
lOtanph 6 kmph 1 kmpi StaticSW OD
Ma*Load
kgs/flbs)
MaxLoad
kgs'fibs)
MaiLoad
kg&'ISs}
Ma*Load
kg&'ijbs)mmin
mmm
mmm
mmm
23 9 14375 15525 16675 184(H) 20700131 31600 34230 36 760 40560 46840
16.00-25 11.25 2 432 IM S 7 t5 45S0170 60 SM 29 15 190.3 32 10 1&&25 16875 16125 20001) 22500
145 34450 37200 393® 44090 49605
M
>H
CATEGORY : L5 S INDUSTRIAL. SMOOTH EXTRA DEEP TREAD
SLICK 404TYPE : TUBELESS / TUBE TYPE
OeMgr ed for heavy duty forXIrtta .¡nd conta »ei handler $ (w u h stactersloperat mg o.~ hand unproved surface«Spec: i l ‘v frnnu lflisd « c i.t d«?p treed leinforced sidewalls « "a r superior h f t t resisEanoi feu vciuble free service b logger lifeFi alter uesd vvitf-. large tread width provides h*gh ground contact area for good traction on paved ground
SizeRim
WitHhIn
FlangeHaigM
in
UnloasJadStatic.
LoadedRadius
RollingClrclim PR
Load Capacity for Industrial applicates (Reach SiackerftkneflskMr
I nil. Pressure bflr/(psii
25 krnph 10 kmph 5 kmph 1 krroft StaticSW 00
Ma*Load
te'dbsj
Ms*Load
kgs.(lbsi
Mg*Load
kgstflbs)
M as Lead
kq5.J|©S)
MewLoad
kg^(lbs)mmIn
mmm
mmIn
mmin
12.00-20 8.5 - 31512,4
116145.8
5362T.2
3433135.2
20 10145
7690f695C
830015300
8920J9655
»64021690
1107024400
14.00-24 1D.Ó0 t .s 37514.8
1418 55 S3
tì&s 25 9
4197(6 5 2
28 10J45
12500, 2756C
1350025760
145003J965
1800035275
18000396®5
16.00-25 13.00 2.5 496fa 6
167365.9
76Ö30,2
4952 195 0
32 9130
187504)335
2025044645
2175047950
24000529)0
2700059525
40 10.5>50
21250■(0845
2295050595
2465054345
2720059965
3060067460
b
AlI tyres conform to T & RA and ETRTO StandardsNote : f) PLY RATING other than m entioned carl be p toducod fo r speeiaf roquifoments.
o
CATEGORY : IND 4, SMOOTH EXTRA DEEP TREAD
PORT PRO SLTYPE : TUBELESS
Specially designed for heavy duty forklitts and containers handlers (reach stackers) operating on hard improved surfaces.Specially formulated extra deep tread, reinforced sidewalls offer superior heat resistance for trouble free service & longer life.Flatter tread with large tread width provides high ground contact area for good traction on paved surfaces.
Size
18.00-25
18.00-33
Type
Tubeless
Tubeless
RimWidth
13.00
13.00
FlangeHeight
2.5
2.5
Unloadeddimension
SW OD
mmin
49819.6
498196
mmin
167365.9
187773.9
StaticLoadedRadius
mmin
76830.2
86233.9
RollingCircum
mmin
4952195.0
5556218.7
PR
40
40
Load Capacity for Industrial applications (on hard improved surfaces)
Infl.Pressure
bar/(psi)
10.5150
11.4165
25 kmphMax Load Capacity
kgs/(lbs)
2125046845
2500055000
10 kmphMax Load Capacity
kgs/(lbs)
2295050595
2700059400
5 kmphMax Load Capacity
kgs/(lbs)
2465054345
2900063800
1 kmphMax Load Capacity
kgs/(lbs)
2720059965
3200070400
StaticMax Load Capacity
kgs/(lbs)
3060067460
3600079200
A ll tyres conform to T & RA and ETRTO Standards
NonSkid
Depth
mmin
Size
18.00-25
Type
PORT PRO SLTYPE : TUBELESS
Specially designed for heavy duty forklifts and container s handlers (reach stackers) operating on hard improved surfacesSpecially formulated extra deep tread, reinforced sidewalls offer superior heat resistance for trouble free service & longer life.Flatter tread with large tread width provides high ground contact area for good traction on paved surfaces.
Tubeless
RimWidth
in
13.00
FlangeHeight
2.5
Unloadeddimension
SW
mmin
49819.6
OD
mmIn
167365.9
StaticLoadedRadius
mmin
76830.2
RollingCircum
mmin
4952195.0
PR
40
Load Capacity for Industrial applications (on hard improved surfaces)
Infl.Pressure
bar/(psi)
10.5150
25 kmphMax Load Capacity
kgs/(lbs)
2125046845
10 kmphMax Load Capacity
kgs/(lbs)
2295050595
5 kmphMax Load Capacity
kgs/(lbs)
2465054345
1 kmphMax Load Capacity
kgs/(lbs)
2720059965
StaticMax Load Capacity
kgs/(lbs)
3060067460
A ll tyres conform to T & RA and ETRTO Standards
NonSkid
Depth
mmin
773.03
H
CATEGORY : IND-4
PORT PRO RXTYPE : TUBELESS
Designed lor porn,container hnnalaisr. oui can also be usi»c< 1oi imflrm ittem highway serivce Specially formlated had offers pood fractio ■. & high mileage, superior re lia n ce to wear & damage.Tieact pattern is ae-¡gni-M to :a r / \ Heavy loads on all type o ‘ surfaces such 35 rock,, mv«cl, h ighw ays and hard ■ mproved surfaces like concrete of r u w a y asphali
LaTge tread w idth w ith high Sand to-void ratio provides very high around coniac i area lo r good traction on pavedSuriiiCf;Idem lor »asvy duty application» 41 ports ana Container riandiing operations, on hmtl improved mrfiices
RimWrftfi
In
Unloateldsrtenstwi State
LoadedRaosfs
RollingCircum
Load Capacity for Industrial appicatiora (on hard improved surfaces!NonSkid2Skmph 10kmph Skmpti t kfflOtl Static
Infl Max Load Max load Ma» Load Max Load Max Load DepthPremure Capacity Capacity Capacity Capacity Capacity
mmbar'i.psl kgs'ilbsj kgs'(lbs| Kg&'IMi ttgsi|lt*} k$$i(lbsf tn
8630 9320 10000 11040 12420 35144 19025 2Ö54S 22045 24340 273*0 1.4
AW tyres conform to T & RA and ETRTO Standards
>
H
CATEGORY : IND-4
PORT PRO RXTYPE ; TUBELESS
Designed lor heavy duly iobs. tyres tan support heavy loads c l extreme working cendit'ons A special wear resistant Iroed compound ¡lives «xtra lifeft hoEiuy duly nylon c 1 : ;i increases 3tre-"Hith and durability '-rid promoter- Itipto 'etreads to get on e»:,.:'ionl return Oh your itwestrtemLarge tread widli*. prnvides veiv high gro.jud eoniatT area lo r floor) traction on paved stutface
Ideal lor heavy duly appi catsonsaT ports and Conlaiaer Handling operations on hard mpwved «nlsoes■¡eg. Concrete, runaway asphaltl
Si?e
13.D0-25
18.00-31
Tyre
TubelcSS
Tubelesa
RimWttflh
In
FlangeHeght
13.00 2.5
13.00 2.5
Unloadedt&nensfcm
SW
in
49a19.6
49819.6
OD
nn1In
1573 65 9 187773.9
Stalk.LoadedRadus
mmIn
764 30 1 86834.4
RailingCircuiti
mmm
4952 195 0
5556218.7
PR
40
40
Load Capacity for IndusLial applications (Rsadt Stacker}
M .Pressurebar'(pa 1
1014511.4165
25 krnpfi 1D kmpt
Max Load Max ¡.cad Capacity Capacity
kgsiflbsi kgs'ijbsi
21250 2295046B45 50505
25000 2700055000 59400
5.WMa» Load Capa&iy
kg**TCs)
2465054545
2900063800
t fcmphMax Load Capacity
KgS'iltlSf
27200599651200070400
StaticMa* Lead Capacity
kgs/jibs;
NonSted
DapU'
{mm)
306W) 5667460 1 236048 57.fi792CO 2.3
H
Alt ty res conform to T 8. RA and ETRTO Standards
28
CATEGORY : IND-3
PORT PRO RXTYPE : TUBELESS
Specially designed for heavy duly forklifts and container handlers operating on hard improved surfaces.Self cleaning sturdy lugs are designed for better traction at the same time more rubber in the footprint offers better penetration resistance and excellent mileage.Flatter tread with large width provides very high ground contact area for good traction on paved ground.
Size
21.00-25
Type
Tubeless
RimWidth
in
15.00
FlangeHeight
in
3.0
Unloadeddimension
SW
mmIn
58523.0
OD
mmin
175969.3
StaticLoadedRadius
mmIn
80031.5
RollingCircum
mmin
51402024
PR
40
Load Capacity for Industrial applications (on hard improved surface)
Infl.Pressure
bar/(psi)
10
144
25 kmph
Max Load Capacity
kgs/(lbs)
2500055000
10 kmph
Max Load Capacity
kgs/(lbs)
2700059400
5 kmph
Max Load Capacity
kgs/(lbs)
2900063800
1 kmph
Max Load Capacity
kgs/(lbs)
3200070400
Static
Max Load Capacity
kgs/(lbs)
3600079200
NonSkid
Depth
(mm)
40.21.6
CATEGORY : IND-3
PORT PRO TXTYPE : TUBELESS
Specially designed for heavy duly forklifts and container handlers operating on hard improved surfaces.Self cleaning sturdy lugs are designed for better traction at the same time more rubber in the footprint offers better penetration resistance and excellent mileage.Flatter tread with large w idth provides very high ground contact area for good traction on paved ground.
Size TypeRim
WidthIn
FlangeHeight
in
j Unloaded IStatic
LoadedRadius
RollingCircum PR
Load Capacity for Industrial applications (Reach Stacker)NonSkid
Depth
(mm)
dimension
Infl.Pressure
bar/(psi)
25 kmph 10 kmph 5 kmph 1 kmph Static
SW OD Max Load Capacity
kgs/(lbs)
Max Load Capacity
kgs/(lbs)
Max Load Capacity
kgs/(lbs)
Max Load Capacity
kgs/(lbs)
Max Load Capacity
kgs/(lbs)mmIn
mmIn
mmin
mmin
18.00-25 Tubeless 13.00 2.5 51020.1
161763.7
74329.2
4781188.2
40 10145
2125046845
2295050595
2465054345
2720059965
3060067460
321.3
21.00-25 Tubeless 15.00 3.0 58523.0
175969.3
80031.5
5140202.4
40 10144
2500055000
2700059400
2900063800
3200070400
3600079200
401.6
21.00-35 Tubeless 15.00 3.0 58022.8
200478.9
92036.2
5925233.3
40 10144
2500055000
2700059400
2900063800
3200070400
3600079200
371.5
H(A
A ll tyres conform to T & RA and ETRTO Standards
SizeRim
Widthin
CATEGORY: INDUSTRIAL
ROCK-XLTYPE: TUBETYPE
Designed for mining, logging, portlcontainer handlers), but can also be used for intermittent hihgway service.Specially formulated tread offers good tracton & high mileage, superior resistance to wear & damage.Tread pattern is designed to carry heavy loads on all type of surfaces such as rock. mud. hihgways and hard improved surfaces like concrete or runway asphaltLarge tread width with high land to void ratio provides high ground contact area for good traction on paved surface.
FlangeHeight
Unloadeddimension
SW
mmin
OD
mmin
StaticLoadedRadius
mmin
RollingCircumference
mmin
PR
Load Capacity for Industrial applications (on hard improved surfaces)
Infl.Pressurebar/(psi)
25kmph
Max Load
Capacity kgs /(lbs)
10kmph
Max Load
Capacity kgs/(lbs)
5kmph
Max Load
Capacity kgs /(lbs)
1kmph
Max Load
Capacity kgs /( lbs)
static
Max Load
Capacity kgs /(lbs)
A ll tyres conform to T & RA and ETRTO StandardsNote : PLY RATING other than m entioned can be produced for specia l requirements.
Size
16.00 - 25
21.00-25
RimWidth
in
11.25
15
CATEGORY: E3 (IND)
ROCK-XLTYPE: TUBELESS
Specially designed for heavy duty forklifts and container handlers operating on hard improved surfaces.Self clearing sturdy lugs are designed for better traction at the same time more rubber in the footprint offers better penetration resistance and excellent mileage.Flatter tread with large tread width provides very high ground contact area for good traction on paved ground.
FlangeHeight
in
2.0
3.0
Unloadeddimension
SW
mmIn
444
17.5
58523.0
OD
mmin
1485
58.5
175969.3
StaticLoadedRadius
mmin
682
26.9
80031.5
RollingCircumference
mmin
4418
173.9
5140202.4
PR
28
32
40
Load Capacity for Industrial applications (on hard Improved surfaces)
Infl.Pressurebar/(psi)
9
131
10145
10
144
25kmph
Max Load
Capacity kgs /(lbs)
14375
31690
1562534450
2500055000
10kmph
MaxLoad
Capacity kgs /(lbs)
15525
34230
1687537200
2700059400
5kmph
Max Load
Capacity kgs /(lbs)
16675
36760
1812539960
2900063800
1kmph
Max Load
Capacity kgs /(lbs)
18400
40560
2000044090
3200070400
static
Max Load
Capacity kgs /(lbs)
20700
45640
2250049605
3600079200
H(A
A ll tyres conform to T & RA and ETRTO StandardsNote : PLY RATING other than m entioned can be produced fo r specia l requirements.
30
Size
14.00-24
18.00-25
RimWidth
in
10.00
13.00
CATEGORY : E3 (IND)
GRIPMASTER NDTYPE : TUBELESS/TUBE TYPE
Specially designed for heavy duty forfclrfts and container handlers (reach stackers) operating on hard improved surfaces.Specially formulated extra deep tread, reinforced sidewalls offer superior resistance to wear& damage and ensures high mileage.Flatter tread with large tread w idth provides very high ground contact area for good traction on paved ground,
FlangeHeight
in
1.5
2.5
Unloadeddimension
SW
mmin
38515.2
49819.6
OD
mmin
136853.9
161563.6
StaticLoadedRadius
mmin
63024.8
73829.1
RollingCircum
mmin
4050159.4
4780188.2
PR
28
40
Load Capacity for Industrial applications (Reach Stacker)
Intl.Press.
bar/(psi)
10
145
10
145
25kmph 10kmph 5kmph tkmph static
MaxLoad
kgs /(lbs)
1250027560
2125046845
Max Load
kgs /(lbs)
1350029760
2295050595
Max Load
kgs /(lbs)
145003Í965
2465054345
MaxLoad
kgs /(lbs)
1600035275
2720059965
MaxLoad
kgs /(lbs)
1800039685
3060067460
GRIPMASTER XL
CATEGORY : E4 (IND)
GRIPMASTER XLTYPE : TUBELESS
• Designed for heavy duty jobs, the entire family of GRIP MASTER tyres can support heavy loads at extreme working conditions.
• The specially designed non directional tread ensures high hourage even on the most abrasive surfaces• A special heat, cut and weather resistant compound makes it capable to withstand cuts, snags and bruises• A heavy duty nylon casing increases strength and durability and promotes multiple retreads to get an excellent return on
your investment.• Large tread width provides very high ground contact area for good traction on paved surface.• Ideal for severe heavy duty applications in mining, quarrying and Container Handling operations on hard, improved
surfaces(eg. Concrete, runaway asphalt).
SizeRim
Widthin
FlangeHeight
in
Unloadeddimension Static
LoadedRadius
RollingCircum
PR
Load Capacity for Industrial applications (Reach Stacker)
Intl.Press.
bar/(psi)
25kmph 10kmph 5kmph 1kmph staticSW OD Max
Load kgs /(lbs)
Max Load
kgs /(lbs)
Max Load
kgs /(lbs)
MaxLoad
kgs /(lbs)
MaxLoad
kgs /(lbs)mmin
mmin
mmin
mmin
18.00-25 13.00 2.5 498Í9.6
167365.9
76430.1
4952195.0
40 10145
2125046845
2295050595
2465054345
2720059965
3060067460
H(A
A ll tyres conform to T & RA and ETRTO Standards
CATEGORY: INDUSTRIAL
GRIP MASTERTYPE : TUBETYPE
Suitable <<>r pan eppiicstlan. bui e#n i loi .nrrw.-.meni highway seivieesSpecwi tread d<ssk)f provides good V acton fc ■ ijj- m lease svpwwr 10 ween a rough nylon casingensures trauCle free lar g lifeCompound formulated for hear, cu; 6 abrasion resistance
M
5íeRim
Widlhm
12.00-20 8 50
UnicastediSw skin
SW 00
115045.3
StaticLoadedRadius
RplingCiratmfew ioe PR
3409134.2
20
Uad Capacity far Industrial applicates (on hard improved surfaces)
InnPrassiiretWrilpSi)
25kmpfi 10kmph ShniJfi licmph static
Mas Load
kgs ijibs)
518511430
Max L<sad
kgs .'(lbs)
MaxLiiad
kgs .l ibs)
610013450
892®19665
Max Load
kgs ilfi*;,
994011690
MaxUsad
kgs ijlbsj
97&D21510
>
H
Drive Wheel - R3
C 30STUBETYPE/TUBELESS
üw cm llV 'lw ignod muilipurposn trader dnvnwheel t y j , provides n>gh IlcmUiüon tin so*- w ii orchiirds ole Aiso ideal for ori-the-road, in-dustnal and road construction equipmen Is..Strong nylon easang jij« I design, high tread depth enwresiong service le
Size Rim
UntaadedStatic
LoadedRadius
RollingCircum
-fertfice
PRLoadInda*
InBpress
% k o [ite )Speed, km'ti ( iw *)
SW 0 0 tasned torque: Road irsnsponi — m i ,, i
Nol i':-v]h and sus Low Tomue ¡Hiafc Tor
franin
mmin
mrr>In
mmIn
SpeedSymbol
BarPsl
Static 105
2D12
3010
4025
5031
106
2012
106
0.9 5930 3870 3170 2760 2580 2350 3610 3100 276013 f306P 8520 6980 6080 5680 5 f 80 7950 6830 60801 «300 4110 3370 2930 2740 2490 3840 3290 293015 905ÜÍ 7420 6450 $040 M 60 ÍW60 7250 5450
a PR 1.1 6670 4350 3570 3100 £900 2640 4060 3430 3100USAS f f i 14690 B5SÜ 7860 6830 6390 5S10 8940 7670 SB3Ü
1.2 6830 4460 3650 3180 2970 2704) 4160 3560 318017 15040 9820 8040 7000 6540 5950 9)60 7840 7000
23.1 -26 CW20 587 1560 690 4545 1.3 7150 4670 1330 3330 3110 2630 4350 3730 333023. t 61 4 27 2 178.9 19 is rs o TÖ290 6440 7330 essfl 6330 9580 8210 7330
10PH 1.4 7460 4860 4ÖD0 3460 3250 2960 4550 3900 3480149A8 20 164B0 T0750 e s to 7670 7 reo 6520 10020 8590 7670
1.5 7800 5090 4170 3630 3390 3080 4750 4070 303022 17J80 11210 9)90 6000 7470 6700 J0460 6960 8000
1ZPR 1.7 8400 5460 449D 3410 3650 3320 5110 4360 391015.140 25 1HSOO 12070 9690 B6T0j S04Ü 7310 11260 atíüo se m
1.9 8990 5870 4810 4160 3910 3560 5470 4690 418028 tSBOO T29-3B 10590 92Í0 86f0 7840 J2050 10330 S2102.1 9550 6230 5100 4440 4150 3780 5810 4980 444030 11040 13720 11130 9700 9140 m j 11800 10970 979(1
IBPft 2-3 10060 6560 5360 4660 4375 3960 6130 5250 4680T59A6 33 22160 14450 fiSSO 10310 9640 S770 13500 >f&S0 !03fÖ
H
«
F A R M T Y R E S
Altura Farm tyre range comprises of Drive
wheel (R1, R3), Steering wheel (F2), Flotation,
Traction 1 - Implement and MPT tyres.
Drive wheel tractor
Self cleaning angular tread bars provides optimum traction and maximum pulling power in wet condition
Even distribution of load provides low soil compaction ■<
Weather and crack ^ ---------------resistant sidewall
Rugged casing ensures lull power transmission and guards against mechanical failures -4-----------
Bead contour tyre/rim fitment
Tyres can also be custom made to cater to the exact need of the customers.
Combine Harvester
Soil compactor
Forage Harvester
AXLES & TYRES
rÂ
j M ' y ] I
L J
Drive Wheel - R1
SAMRATTUBETYPE
• Tractor drive wheel tyre with strong lugs for heavy duty services• Specially designed deep lugs w ith 50 angle provides high traction, self cleaning properties and long service life under
hardest working conditions, including on-the-road services.• A stong nylon casing provides excellent stability and guards against mechanical failures. Also suitable for industrial /
construction applications.
UnloadedPR
LoadIndex
Load Carrying Capacity, kg (lbs)dimension Static Rolling Infl. Speed, km/h (mph)
Size Rim SW ODLoadedRadius
Circum-ference
press Field operationj Not high and sustained torque; Road transport Low Torque HignTotque
mm mm mm mm Speed Bar Static 10 20 30 40 50 10 20 10In In In in Symbol Psi 6 12 19 25 31 6 12 6
16.9 - 30 W15L 42916.9
148558.5
66726.3
4369172
10PR141A8
2.130
592013040
38608500
31706980
27606080
25755670
23405J50
36107950
30906810
27606080
A ll tyres conform to ETRTO Standards Tubeless Can be made on request
Drive Wheel - R1
SAMRAT PLUSTUBETYPE
Tractor drive wheel tyre with strong lugs for heavy duty services.Specially designed deep lugs w ith 50 angle provides high traction, self cleaning properties and long service life under hardest working conditions, including on-the-road services.A stong nylon casing provides excellent stability and guards against mechanical failures. Also suitable for industrial / construction applications.
UnloadedPR
LoadIndex
Load Carrying Capacity, kq (lbs)dimension Static Rolling Infl Speed, km/h (mph)
Size Rim SW ODLoadedRadius
Circum-ference
press Field operationNot high and sustained torque; Road transport Low Torque High Torque
mm mm mm mm Speed Bar Static 10 20 30 40 50 10 20 10In in in in Symbol Psi 6 12 19 25 31 6 12 6
16 .9-28 W15L 42916.9
143556.5
645 25.4
4222166.2
12PR152A8
2.435
6270Í3825
40909015
33507385
29156425
27256010
24805470
38158410
32707210
29156425
H
h JA ll tyres conform to ETRTO Standards Tubeless Can be made on request
3Ik
34
§
Drive Wheel - H1
SAMRAT SUPERTUBETYPE
• A heavy dirty p ramlum Tractor dnve wheel Ivre with extra strong, deep lugs.* Double angle ( ta g n pravidee high tra c tu r . self oleamng (Kur^rties ¡ ‘ d mots surface contact area for better haulage in
both ar.ihs road and o ff the road services* A sti ty,g ny.Lin ciiai m | provides. ejicelt(r i stability anil guards «aAinsl methanlcsl fitilurea• Also Suitable for industrial / construction applications.
Sj2jj
UnloadedStatic
LoadedRadius
RollingCirctsn
-ferente
PRLoadIndex.
inf!.PJB-«
load C3rrv«iq Capacity. kq tbs)ifcnet«iDI' SpeeC.kmiHimph)
Rim SW 0DFnHdceer fen
IHos high and &islain&a t&'qua; Road transiMrt LmTaoia HistiTirattjmmIn
mmIn
mm mmIn
SpeedSymbol
BarPs.
Static to6
2012
3019
4025
SO31
106
2012
10s
12.« - £.1 W11w toW10K
31572.4
116045.7
53321.0
3410734.3
8PR121 AS
2.333
33407360
21804800
17803920
15503410
14»!3790
132029 ro
20304470
17403830
1 5503410
12.4 ■ 2« WI1 31512.4
126049.fi
58323
3717746.3
8PR123AS
2.333
35707360
23305730
19104210
16603660
155034)0
14103 f 70
21704780
18604)00
16603660
13.6 -28 W12 345?3.e
13105J.fi
59623.5
3685153
10PR130A8
2 536
43709635
28506285
23355750
20354465
19004790
17303815
26605365
22605025
20354485
14.9-28 W13W12
37014.9
136553.7
639 25 2
4095767.2
12PR73CW3
2.333
487510750
29706550
254556J0
21204675
191042)0
17403835
286563)5
23505)80
20454510
18.4 ■ 30 W t&L 467)8.4
15506)
693 27 3
4546179
14PR152A8
2 739
8170isooo
5330f f 740
43709C30
38008370
35507820
32307110
4970)095O
42609380
345008370
A ll tyres conform to ETRTO Standards T t ib tilt ts Can lie mmJi! on rc c ju iil
|
Drive Wheel - R2
AAYUSHMAAN - RICE SPECIALTUBETYPE
* EslraDeep Tread specially designed for superior grip in muddy so l■ 0W iplijg$N .-|i In iticj ui: t mj S,llpp8[jt! hx ; h Im i ! ij'ip iri mutlrty ‘.a ll, fniUCCSSllptJiigL-■ A stong nylon casing provides e»c*? ien( stability a r.d guards ariain-st mechanical failure:;
5 2 *
UnloastedDinvsns<»i
StateLoadedftsfius
RollingCircgm■forance
PRLoadIrttfsx
InftPressure
Load Carrying Capacity * Kg
TneadDepth
Rim SW 0Dmmin
mmin
mm«
iwii
inSpeedSymbol
BarPsi
3019
nwn
12.4 - 2*W11 325
12.8
1293
£0.9
596
23.5
3B1S
150.2
12PR
125 A6
2 5
36
1650
3640 66
>h
A lt tyres conform to E m TO Standards
3ifa
T rfi-
Drive Wheel - R1
IRR-0 GATORTUBETYPE/TUBELESS
Tractor drive wheel tyre, designed to provide high traction, self cleaning properties and long service life under tough working conditions,A stong nylon casing provides excellent stability and safety to the operator.
Size Rim
Unloadeddimension Static
LoadedRadius
RollingCircum-ference
PRLoadIndex
Infl.press
Load Carrying Capacity, kg (lbs)Speed, km/h (mph)
SW 0 0 Not high and sustained toque; Road transpon Field operationLow Torque High Tor
mmIn
mmin
mmin
mmin
SpeedSymbol
BarPsi
Static 106
2012
3019
4025
106
2012
106
11.2-24 W10W10H
28411.2
110543.5
51220.2
3260128.3
6PR110A8
1.826
24405370
15903500
13002860
11302490
10602330
14803260
12702800
11302490
8PR116A8
2.435
28806340
18804140
15403390
13402950
12502750
17503850
15003300
13402950
TRACTOR FRONT (F - 2)
SAM RATTUBETYPE
• 3 Rib front wheel tyre provides easy steering for general farming purposes.• Strong nylon casing and high grade compounds ensures long lasting, quality performance
Load Carrying capacity, kg (lbs)
Speed, km/h (mph)
m - 'i t i 'U m l-M m m L S u l
(1) 6PR and above with a 25% increase in in fla tion pressure.(2) In case where a front-end loader is fitted on the tractor, *100% applies. A ll tyres conform to ETRTO Standards
TUBETYPE
• 4 rib front wheel tyre. Ideally suitable for both farming and haulage operations• Specially designed rugged shoulder bars provide extra protection to sidewall, whereas wider tread provides greater
contact to surface and hence longer life.
Size Rim
Unloadeddimension
SW
mmin
OD
mmIn
StaticLoadedRadius
RollingCircum
mmin
PR
6PR
LoadIndex
SpeedSymbol
88A680A8
Infl.press
BarPsi3.348
Load Carrying capacity, kg (lbs)
Speed, km/h (mph)
8401850
159
8001765
2012
7551665
2516
6451420
3019
5601234
3522
5051115
4025
450990
(1) 6PR and above w ith a 25% increase in in fla tion pressure.(2) In case where a front-end loader is fitted on the tractor, +100% applies. A ll tyres conform to ETRTO Standards
’. r I■;è r
DRIVE WHEEL - R3 C 305
TUBETYPE/TUBELESS
Specially designed multipurpose tractor drive wheel tyre, provides high floatation on soft soil, orchards etc. Also ideal for on-the-road. industrial and road construction equipments.Strong nylon casing, rugged design, high tread depth ensures long service life
Size
23.1 -26
Rim
DW20
Unloadeddimension
SW
mmin
587 23.1
00
mmIn
156061.4
StaticLoadedRadius
mmin
69027.2
RollingCircum-ference
mmIn
4545178.9
PRLoadIndex
SpeedSymbol
8PR145A8
10PR149A8
12PR153A8
Infl.press
BarPsi
0.9131
15 1.1
161.2171.3191.4201.5221.725
Load
Not high and sustained torque; Road transport
Static
5930130606300138806670146906830150407150157507480164807800171808400185008990198009550210401006022160
106
38708520411090504350958044609820467010290488010750509011210548012070587012930623013720656014450
2012
3170698033707420357078603650804038308440400088104170919044909890481070590510011230538011850
3019
27606080293064503100683031807000333073303480767036308000391086704180927044409780468010310
4025
2580568027406040290063902970654031106850325071603390747036508040391086104150914043759640
5031
23505180 2490 5480 264058102700595028306230296065203080678033207310356078403780833039808770
Low Torque106
3610795038408460406089404160916043509580455010020475010460511011260547012050581012800613013500
Hign i orque2012
3100683032907250348076703560784037308220390085904070896043809650469010330498010970525011560
106
27606080293064503100683031807000333073303480767036308000391086104180927044409780468010310
A ll tyres conform to ETRTO Standards
3ih
38
FLOTATION IMPLEMENT FLOTATION T422
TUBELESS• ¡ocation T'jt>ele«s lyros 9eve*op«d wrth high irvnor voiv-mo onr-iirBs tow specific ground pressure preveminq
dstnagsi to fieW8.fi :-iöps• Tüugr, Nyion casing can withsiancj inft severe delrocrmn in serv.ce,• Higii i- ff f ig ir i bead wirescoupted w thd fts igno f contciur ft man n on'MfflpCWivöwithstandstiiflhstressnittie besel
región• Suilabta torbolhonand dH raadagnculunai s“ rv¡c-o
Sl.
NdS iíB
R im
Inches
O f f i r
Diamaler
mm
S e d a i
w a rn
n n i
State
UadeiJ
rad iis
mm
Riding
Cucum-
!s BIW3
mm
PSF rs e R d ln g
U a d Inte»
Speed S jm W
D ura Wheel
L n il lw S s i
Spasd Symbd
Infi,
PmsS.
Car
Laad Cap3crty|>^5,i
a l d ie r e n ! speeß ¡lin ip li)
F tee RofSng W t w l
Load Capacily ikg ä l
s t Ä r e n ) spaed (k in iifi(
Dnve M ie e i
1D 25 40 50 10 25 40 50
t S5Q M H 2S 16 .00 DC 1070 550 <70 3100 1 Ì 1S3AB. 14SB 141AB,13TB
15
1.9
2.1
4230
4820
5110
S K )4090
4350
300034411
3650
2 Í00
3100
3290
2960
34CO
3610
251'3
2890
3060
2110
2430
2 Í75
1900
2 1 ®
2320
16 1 Í9 A 8 .1560 W A S , 143B
2.4
2.6
2 *
» 0 0
5370
6130
47150
4 9 »
5210
4000
4190
4375
3800
377C
3940
2030
4120
4310
3 3 «
3503
3680
2810
2940
3075.
2630
2660
2775
: SOÙW -ZW 16.00 DC 1170 500 510 338Ü 12 157AB, 1540 145AB, 142B
2.0
222.4
51*1
57B0
4410
4660
491a
3710
3920
«125
3340
3530
3Í1D
3650
3860
4666
3110
3293
3456
2610
2760
2900
23SO
2480
261D
16 163A8. IS9B 151 AB, 1480
2 3
3 0
3 2
6310
6570
6090
5370
5580
5S00
451.0
«aso
4075
4060
4220
4390
4470
46SO
4830
SÖ3
» 5 0
4110
3 1 ®
332t'
U M
2870
2960
J110
3 S5C 4¡M Z5 16.00 DC 1238 550 5*0 35ä) 12 160AB. t560 14ÄAB, 144B
IS
2.1
23
5*50
5980
63DQ
4640
5390
5560
390«
4270
45DQ
3510
3840
4B50
3820
4190
441»
3253
3553
3750
2730
2990
3156
2460
26S0
234C
16 166AB, tG2B 154AB, 1500
2 4
2£3.0
6510
6820
7420
Söffl
SM0
6310
4B5Ö
4070
53 DO
4190
4300
4770
4610
4830
5250
3320
4110
4160
3SS0
3450
375Ö
29603110
3330
4 BWffiG-22.5 20.03 DC 117D 000 510 3 3 ® 12 15SAB. 15CB 147AB. 1440
15
1.7
2 0
51S3
5570
6130
4400
4740
a m
3700
33BC
4375
3330
3580
394G
3840
3920
4310
3090
3330
5660
2000
2800
307Í
2340
2520
2770
16 165AB. 161B 155AB, 143B
222.4
2.6
65*3
6870
721B
5560
S840
6IJQ
4870
4 9 »
5156
4200
4420
4E4B
4630
4870
5110
» 4 04140
4340
3310
34B0
365C
290)
3130
329C
5 «0WSS32S 20.03 CC 1238 © 0 5 « 3580 12 164AB. 160B 151 AB. 1480
15
1.7
2.0
5920
6370
7000
i m5410
5950
4230
4550
6000
3810
4100
4500
4090
44C0
4330
3470
3740
4110
29ÍO
3140
3450
2630
2830
3110
16 16SAB, 166B 156AB, 153B
222,4
2.6
7360
7740
B120
6260
6580
6900
52GC
5530
5800
4730
4580
5220
6C80
5350
5600
4320
4550
4760
3630'
3820
4006
3270
3440i a c
G 60CIS&-26S 20.00 DC 1333 €00 585 3S50 12 165AB, 161B 153AB, MOB
15
13
2.0
6090
6780
*210
5180
5760
6130
4350
4840
5150
3920
4360
4640
4310
4800
5110
3670
4083
43*0
3C60
3430
3650
2770
3£fiO
3290
16 170AB, I67B 159AB. IM S
2 2
2.4
2.6
7620
8020
9400
6470
6820
7140
5440
5730
r,noa
4900'
5 ÍB0
5400
56ÉO
6840
6134
47Í0
4953
5210
39Í0
4170
4375
3670
3750
3W 0
T r r r a > 2 ? 5 24.00 DC 1238 roo 550 3650 12 1m AB,1HB 156AB.153B
16
18
22
6510
6970
7B40
5Ö30
5 9 »
6660
4650
4980
5600
4190
4406
6040
4650
4B6Ò
5600
3950
4240
4760
3320
3560
4006
2S0O
3200
3600
16 174AB, 1 Í0B 16ZAB, 15BB
2.4
2.6
6570
9380
7230
7970
6120
B7D0
5610
6030
E6Ö0
6650
5160
5650
4340
4750
3910
42SO
a 70& 4 IK 22Í 2 4 ÍO D C 1170 700 510 3380
12 16ÖAB.1S7B 14SAB, 144B
1.7
2 0
5730
6300
4576
5360
409U
45Ó0
36aB
4050
400C
4410
3400
5750
2B66
31ÌO
2470
2840
16 166AE. 1G2B 154AB, f SOS
2 2
2.6
6730
7420
5720
6310
4BT0
53004330
4770
476*
5250
4050
4460
3400
37850
3C6Ú
3380
1 Í 16S M .165B 158AB. 1S3B
3 0
3 4
7260
7040
6 1 »
6560
5200
56004500
5040521»
seco
4430
4760
3720
40003350
3ÖM
» 7HÜ50-26-5 24.00 DC 1333 700 585 3850 1 ! 169AB. 1C5B 157A8, 1540
1.6
1 i
7570
B120
6440
W M
5410-
500C
4B70
522053*
5780
45304910
3 8 ®
4125
3470
3710
16 174AB, 170B 162AB, Í5BB
22U
8320
3300
7530
7970
6370
67(16
5730
6036
6310
665Ö
5370
5650
4510
475C
4C60
4280
ui 8 0 *4 5 .2 0 5 Z ä iB DC 1343 800 585 3S50 12 17BAB, 167B 1 MAB. 1550
15
1,77810
54Í0
É&ÍÚ7140
5580
6066
5C20
5400
5530
0 5 0
4KM
5060
3660
4250
3S60
3830
16 177AS, tT3B 164AB, 1600
2.0
2 2
9660
10220
3210
» »
5900
7300
6210
6570
6820
7000
5630
9550
4730
5000
42ÉO
4500
h
AXLES & TYRES
TRACTION IMPLEMENT
TRACTION TR 800TUBELESS
■ ALTURA Traction TR 800 pattern is designed to carry high load for both off and on road use. implement and industrial! contruction applications.
• Tread pattern is engineered to provide excellent traction to drive wheel, thus making the tyre suitable for free rolling as well as drive wheel applications.
Size Riminches
OuterDiameter
mm
SectionWidth
mm
StaticLoadedRadius
mm
RollingCircum-ference
mm
PRInflationPressure
bar
Free Rolling Wheel Drive Wheel
TyreWeight(kgs)
TreadDepth(mm)
Load Index Speed Symbol
LoadCapacity
(Kg)
Load Index Speed Symbol
LoadCapacity
(Kg)
400/60-15.5 13.0 876 400 385 2575 14 3.5 145 A8 2900 132 A8 2000 31 17
A ll tyres conform to ETRTO Standards
FARM IMPLEMENTAGRICULTURAL IMPLEMENT 1-1
1 Multi rib low section design provides high dotation.1 Extra wide tread and high volume provides high load carrying capacity at low inflation pressures. 1 Suitable for both on and off-the-road service.
Size RimWidth
in
Unloadeddimension Loaded
StaticRadius
RollingCircum
PR Infl.press.
bar
Load Capacity, kg (lbs)
SW OD Speed, km/h (mph)
mmin
mmin
mmin
mmin
Statfc 1510
5031
7 .6 0 -1 5 SL 5.5 193 734 328 2150 6 1600 920 8007.6 28.9 12.9 84.6 40 3530 2030 1760
8 3.6 1900 1095 95052 4190 2415 2095
6 2.2 1850 1065 9259 .5 L -1 5S L 7.0 241 767 341 2247 32 4080 2180 2040
9.5 30.2 13.4 88.5 8 3 2240 1290 112044 4940 2845 2470
6 1.9 1950 1120 97528 4300 2470 2150
11L-15S L B.O 279 777 345 2275 8 2.5 2300 1325 115011.0 30.6 13.6 89.6 36 5070 2920 2540
10 3.0 2640 1520 132044 5820 3350 2910
8 2.5 2720 1565 13601 2 .5 L -15 SL 10.0 318 823 363 2411 36 5995 3450 3000
12.5 32.4 14.3 94.9 10 3.0 3100 1785 155044 6835 3935 3420
>H
A ll tyres conform to T & RA Standards
top related