facor project
Post on 10-Apr-2018
222 Views
Preview:
TRANSCRIPT
-
8/8/2019 Facor Project
1/39
EXECUTIVE SUMMARY
It gives me great pleasure to present this project report on working
capital finance at FACOR STEELS LIMITED, NAGPUR. The project was
carried out from 1st June 2010 to 31st July 2010.
The main objective of the project was to study various types of
working capital finance required by companies. To know details the
procedure of assessment of working capital finance extended by banks.
Procurement of fund is one of the important functions in business
enterprises and utilizes it for maximization of business profits.
Business enterprises need funds to meet their different types of
requirements,
i. Long-term requirement
ii. Medium-term requirement
iii. Short-term requirement
Working capital requirement is the short-term requirement. Working
capital is the investment needed for carrying out day-to-day operations of
the business smoothly. Bank is one of the important sources of working
capital requirement. Bank gives various facilities to the borrowers.
In this project I have considered various banking facilities for the
working capital finance to the industries. It covers almost important
aspect relating to assessment & follow up of working capital finance.
S
A
L
E
S
D
E
B
T
O
R
S
&
B
I
L
LS
R
E
C
E
I
V
AB
L
E
S
C
A
S
H
O
P
E
R
A
T
I
N
G
C
Y
C
L
E
-
8/8/2019 Facor Project
2/39
CONTENT
Chapter I: - Part A METHOD OF
ESTIMATING WORKING CAPITAL & CASHMANAGEMENT
Introduction to working capital
Advantage` s of adequate working capital
Disadvantage`s of inadequate working capital
Factors affecting working capital
Types of working capital
Bank credit as a source of meeting working capital
requirement Form of assistance Assessment of working capital
Credit monitoring assessment
Security
Banking arrangements
Part B
Corporate profile Introduction of FACORSTEELS LIMITED
Chapter II: - Research methodology
Statement of objective
Statement of limitation
Statement of problem
-
8/8/2019 Facor Project
3/39
Sources of data
Techniques of data analysis
Chapter III: - Data analysis and interpretation
Chapter IV: -
Findings
Suggestion Conclusion
Chapter V: - Bibliography
Chapter VI: - Appendix
INTRODUCTION TO WORKING CAPITAL
In accounting, Working capital is the difference between the inflow and
outflow of funds. In other words, it is the net cash inflow. It is defined as
the excess of current assets over current liabilities and provisions. In other
words, it is net current assets or net working capital.
A study of working capital is of major importance to internal and external
analysis because of its close relationship with the day-to-day operations of
a business. Working Capital is the portion of the assets of a business
-
8/8/2019 Facor Project
4/39
which are used on or related to current operations, and represented at any
one time by the operating cycle of such items as against receivables,
inventories of raw materials, stores, work in process and finished goods,
merchandise, notes or bill receivables and cash.
Working capital comprises current assets which are distinct from other
assets. In the first instance, current assets consist of these assets which
are of short duration.
Working capital`s effective provision can do much to ensure the success
of a business while its inefficient management can lead not only to loss ofprofits but also to the ultimate downfall of what otherwise might be
considered as a promising concern.
The funds required and acquired by a business may be invested to two
types of assets:
1. Fixed Assets.
2. Current Assets
Fixed assets arethose which yield the returns in the due course of time.
The various decisions like in which fixed assets funds should be invested
and how much should be invested in the fixed assets etc. are in the form
of capital budgeting decisions. This can be said to be fixed capital
management.
Other types of assets are equally important i.e. Current Assets.
These types of assets are required to ensure smooth business operations
and can be said to be life blood of the business. There are two concepts of
working capital Gross and Net.
-
8/8/2019 Facor Project
5/39
Gross working capital refers to gross current assets.
Net working capital refers to the difference between current assets and
current liabilities. The term current assets refers to those assets held by
the business which can be converted into cash within a short period of
time of say one year, without reduction in value. The main types of
current assets are stock, receivables and cash. The term current liabilities
refer to those liabilities, which are to be paid off during the course of
business, within a short period of time say one year. They are expected to
be paid out of current assets or earnings of the business. The current
liabilities mainly consist of sundry creditors, bill payable, bank overdraft or
cash credit, outstanding expenses etc.
OPERATING CYCLE
Operating cycle is the time duration required to convert sales, after
the conversion of resources into inventories, into cash. The longer the
period of conversion the longer will be the period of operating cycle. A
standard operating cycle may be for any time period but does not
generally exceed a financial year. Obviously, the shorter the operating
cycle larger will be the turnover of the fund invested for various purposes.
The channels of investment are called current assets.
The operating cycle of a manufacturing company involves three phases:
-
8/8/2019 Facor Project
6/39
1. Acquisition of resources such as raw material, labour, power, and
fuel etc.
2. Manufacture of the product which includes conversion of raw
material into work-in-progress into finished goods.
3. Sale of the product either for cash or on credit. Credit sale creates
book debts for collection.
After assessing the total requirement of working capital, a part of
working capital requirement should be financed for the long term &
partly by determining maximum permissible bank finance.
ADVANTAGES OF ADEQUATE WORKING CAPITAL
SOLVENCY OF THE BUSINESS.
Adequate working capital helps in maintaining the solvency of the
business by providing uninterrupted of production.
GOODWILL
-
8/8/2019 Facor Project
7/39
Sufficient amount of working capital enables a firm to make prompt
payments and makes and maintain the goodwill.
EASY LOANS
Adequate working capital leads to high solvency and credit
standing can arrange loans from banks and other on easy and
favorable terms.
CASH DISCOUNTS
Adequate working capital also enables a concern to avail cash
discounts on the purchases and hence reduces cost.
REGULAR SUPPLY OF RAW MATERIALS
Sufficient working capital ensures regular supply of raw material and
continuous production.
REGULAR PAYMENT OF WAGES, SALARIES AND DAILY
OPEARATING EXPENSES
It leads to the satisfaction of the employees and raises the morale of
its employees, increases their efficiency, reduces wastage and costs
and enhances production and profits.
EXPLOITATION OF FAVORABLE WORKING CONDITIONS
If a firm is having adequate working capital then it can exploit thefavorable market conditions such as purchasing its requirements in
bulk when the prices are lower and holdings its inventories for
higher prices.
ABILITY TO FACE CRISIS
A concern can face the situation during the depression.
QUICK AND REGULAR RETURN ON INVESTMENTS
-
8/8/2019 Facor Project
8/39
Sufficient working capital enables a concern to pay quick and
regular of dividends to its investors and gains confidence of the
investors and can raise more funds in future.
HIGH MORALE
Adequate working capital brings an environment of securities,
confidence, high morale which results in overall efficiency in a
business.
DISADVANTAGES OF INADEQUATE WORKING CAPITAL
Every business needs some amounts of working capital. The need for
working capital arises due to the time gap between production and
realization of cash from sales. There is an operating cycle involved in sales
and realization of cash. There are time gaps in purchase of raw material
and production; production and sales; and realization of cash.
Thus working capital is needed for the following purposes:
For the purpose of raw material, components and spares.
To pay wages and salaries
To incur day-to-day expenses and overload costs such as office
expenses.
To meet the selling costs as packing, advertising, etc.
-
8/8/2019 Facor Project
9/39
To provide credit facilities to the customer.
To maintain the inventories of the raw material, work-in-progress,
stores and spares and finished stock.
For studying the need of working capital in a business, one has to study
the business under varying circumstances such as a new concern
requires a lot of funds to meet its initial requirements such as
promotion and formation etc. These expenses are called preliminary
expenses and are capitalized. The amount needed for working capital
depends upon the size of the company and ambitions of its promoters.
Greater the size of the business unit, generally larger will be the
requirements of the working capital.
The requirement of the working capital goes on increasing with the
growth and expensing of the business till it gains maturity. At maturity
the amount of working capital required is called normal working capital.
FACTORS AFFECTING WORKING CAPITAL MANAGEMENT
The amount of working capital required depends upon a number of factors
which can be stated as below
NATURE OF BUSINESS:
Some businesses are such, due to their very nature, that their
requirement of fixed capital is more rather than working capital. These
businesses sell services and not the commodities and not the
commodities and that too on cash basis. As such, no funds are blocked in
piling inventories and also no funds are blocked in receivables. E.g. Public
utility services like railways, electricity boards, infrastructure oriented
projects etc. Their requirement of working capital is less. On the other
hand, there are some business like trading activity, where the requirement
of fixed capital is less but more money is blocked in inventories and
debtors. Their requirement of the working capital is more.
LENGTH OF PRODUCTION CYCLE:
-
8/8/2019 Facor Project
10/39
In some business like machine tool industry, the time gap between the
acquisitions of raw material till the end of final production of finished
product itself is quite high. As such more amounts may be blocked either
in raw materials, or work in progress or finished goods or even in debtors.Naturally, their needs of working capital are higher. On the other hand, if
the production cycle is shorter, the requirement of working capital is also
less.
SIZE & GROWTH OF BUSINESS:
In very small companies the working capital requirements are quite high
overheads, higher buying and selling costs etc. As such, the medium sizedcompanies positively have an edge over the small companies. But if the
business starts growing after a certain limit, the working capital
requirements may be adversely affected by the increasing size.
BUSINESS / TRADE CYCLE:
If the company is operating in the period of boom, the working capital
requirements may be more as the company may like to buy more rawmaterial, may increase the production and sales to take the benefits of
favourable markets, due to the increased sales, there may be more and
more amount of funds blocked in stock and debtors etc. Similarly, in case
of depression also, the working capital requirements may be high as the
sales in terms of value and quantity may be reducing, there may be
unnecessary piling up of stocks without getting sold, the receivables may
not be recovered in time etc.
TERMS OF PURCHASE & SALE
Sometimes, due to competition or custom, it may be necessary for the
company to extend more and more credit to the customers, as a result of
which more and more amounts is locked up in debtors or bills receivables
which increase working capital requirements. On the other hand, in case
of purchases, if credit is offered by the suppliers of goods and services, apart of working capital requirement may be financed by them, but if it is
-
8/8/2019 Facor Project
11/39
necessary to purchase these goods or services on cash basis, the working
capital requirement will be higher.
PROFITABILITY
The profitability of the business may vary in each and every individual
case, which in its turn may depend upon numerous factors. But high
profitability will positively reduce the strain on working capital
requirements of the company, because the profits to the extent that they
are earned in cash may be used to meet the working capital requirements
of the company. However, profitability has to be considered from one
more angles so that it can be considered as one of the ways in whichstrain on working capital requirements of the company may be relieved.
And these angles are:
TAXATION POLICY
How much amount is required to be paid by the company towards its tax
liability?
DIVIDEND POLICY
How much of the profits earned by the company are distributed by way of
dividend?
-
8/8/2019 Facor Project
12/39
TYPES OF WORKING CAPITAL
FIXED OR CORE OR PERMANENT WORKING CAPITAL
The magnitude of current assets needed is not always same, it increases& decreases over time. However, there is always a minimum level of
current assets which is continuously required by the firm to carry on its
business operations. This minimum level of current assets is referred to as
permanent, or fixed, working capital.
VARIABLE OR TEMPORARY WORKING CAPITAL
The extra working capital, needed to support the changing production andsales activities is called fluctuating, or variable or temporary, working
capital. Both kinds of working capital permanent and temporary- are
necessary to facilitate production and sale through the operating cycle,
but temporary- working capital is created by the firm to meet the liquidity
requirements that will last temporary. As far as financing of the fixed or
permanent needs of working capital are concerned, these needs should be
met out of the long term sources of funds, Own generation of funds, out ofthe profits earned, shares or debentures.
-
8/8/2019 Facor Project
13/39
As far as financing of the variable or temporary needs of working capital
are concerned, these needs can be met from the various sources:
1. A part of these needs may be financed by way of the credits available
from the suppliers of material or services and of delayed payment of
expenses.
2. A part of these needs may be financed by way of long term sources of
funds in the form of own generation of funds, out of profits earned shares,
debentures and other long term borrowings, public deposits etc.
3. A part of these needs may be financed by way of long term sources of
funds in the form of own generation of funds, out of profits earned, shares,
debentures and other long term borrowing.
BANK CREDIT AS SOURCE OF MEETING WORKING
CAPITAL REQUIREMENTS
While bank credit is considered as a major source of meeting the working
capital requirement of the industry, the banks have to consider thefollowing factors before meeting their requirements.
A].What should be the amount of working capital assistance?
B].What should be the form in which working capital assistance may be
extended?
C].What should be the security that should be obtained for extending the
working capital assistance?
AMOUNT OF ASSISTANCE
To obtain the bank credit for meeting the working capital requirements,
the company will be required to estimate the working capital requirements
and will be required to approach the banks along with the necessary
-
8/8/2019 Facor Project
14/39
supporting data. On the basis of the estimates submitted by the company,
the bank may decide the amount of assistance which may be extended,
after considering the margin requirements. This margin is to provide the
cushion against the reduction in the value of security. If the company failsto fulfil its obligations, the bank may be required to realize the security for
recovering the dues. Margin money is meant to take care of the possible
reduction in the value of security. The percentage of margin money may
depend upon the credit standing of the company, fluctuations in the price
of security or the directives of Reserve Bank of India from time to time.
FORM OF ASSISTANCE
After deciding the amount of overall assistance to be extended to the
company, the bank can disburse the amount in any of the following forms
Non-Fund Based Lending
Fund Based Lending
NON-FUND BASED LENDING
In case of Non-Fund Based Lending, the lending bank does not commit any
physical outflow of funds. As such, the funds position of the lending bank
remains intact.
BANK GURANTEE
Suppose Company A is the selling company and Company B is the
purchasing company. Company A does not know Company B and as such
is concerned whether Company B will make the payment or not. In such
circumstances, D who is the Bank of Company B, opens the Bank
Guarantee in favour of Company A in which it undertakes to make the
-
8/8/2019 Facor Project
15/39
payment to Company A if Company B fails to honour its commitment to
make the payment in future. As such, interests of Company A are
protected as it is assured to get the payment, either from Company B or
from its Bank D. As such, Bank Guarantee is the mode which will be foundtypically in the sellers market. As far as Bank D is concerned, while
issuing the guarantee in favour of Company A, it does not commit any
outflow of funds. As such, it is a Non-Fund Based Lending for Bank D. If on
due date, Bank D is required to make the payment to Company A due to
failure on account of Company B to make the payment, this Non-Fund
Based Lending becomes the Fund Based Lending for Bank D which can be
recovered by Bank D from Company B. For issuing the Bank Guarantee,
Bank D charges the Bank Guarantee Commission from Company B which
gets decided on the basis of two factors-what is the amount of Bank
Guarantee and what is the period of validity of Bank Guarantee. In case of
this conventional for of Bank Guarantee, both company A as well as
Company B get benefited as it is able to make the credit purchases from
Company A without knowing Company A. As such, Bank Guarantee
transactions will be applicable in case of credit transactions.
In some cases, interests of purchasing company are also to be protected.
Suppose that Company A which manufactures capital goods takes some
advance from the purchasing Company B. If Company A fails to fulfil its
part of contract to supply the capital goods to Company B, their needs to
be to be some protection available to Company B. In such circumstances,
Bank C which is the banker of Company A opens a Bank Guarantee in
Favour of Company B in which it undertakes that if Company A fails to
fulfil its part of the contract, it will reimburse any losses incurred by
Company B due to this non fulfilment of contractual obligations. Such
Bank Guarantee is technically referred to as performance Bank Guarantee
and it ideally found in the buyers market.
LETTER OF CREDIT
-
8/8/2019 Facor Project
16/39
The non-fund based lending in the form of letter of credit is very regularly
found in the international trade. In case the exporter and the importer are
unknown to each other. Under these circumstances, exporter is worried
about getting the payment from the importer and importer is worried as towhether he will get the goods or not. In this case, the importer applies to
his bank in his country to open a letter of credit in favour of the exporter
whereby the importers bank undertakes to pay the exporter or accept the
bills or drafts drawn by the exporter on the exporter fulfilling the terms
and conditions specified in the letter of credit.
FUND BASED LENDING
In case of Fund Based Lending, the lending bank commits the physical
outflow of funds. As such, the funds position of the lending bank gets
affected. The Fund Based Lending can be made by the banks in the
following forms-
LOAN
In this case, the entire amount of assistance is disbursed at one time only,
either in cash or by transfer to the companys account. It is a single
advance. The loan may be repaid in instalments, the interests will be
charged on outstanding balance.
OVERDRAFT
In this case, the company is allowed to withdraw in excess of the balance
standing in its Bank account. However, a fixed limit is stipulated by the
Bank beyond which the company will not be able to overdraw the account.
Legally, overdraft is a demand assistance given by the bank i.e. bank can
ask for the repayment at any point of time. However in practice, it is in
-
8/8/2019 Facor Project
17/39
the form of continuous types of assistance due to annual renewal of the
limit. Interest is payable on the actual amount drawn and is calculated on
daily product basis.
CASH CREDIT
In practice, the operations in cash credit facility are similar to those of
overdraft facility except the fact that the company need not have a formal
current account. Here also a fixed limit is stipulated beyond which the
company is not able to withdraw the amount. Legally, cash credit is a
demand facility, but in practice, it is on continuous basis. The interests is
payable on actual amount drawn and is calculated on daily product basis.
BILLS PURCHASED OR DISCOUNTED
This form of assistance is comparatively of recent origin. This facility
enables the company to get the immediate payment against the credit
bills raised by the company. The bank holds the bill as a security till the
payment is made by the customer. The entire amount of bill is not paid to
the company. The Company gets only the present worth of the amount of
bill, the difference between the face value of the bill and the amount of
assistance being in the form of discount charges. On maturity, bank
collects the full amount of bill from the customer. While granting this
facility to the company, the bank inevitably satisfies itself about the credit
worthiness of the customer. A fixed limit is stipulated in case of the
company, beyond which the bills are not purchased or discounted by the
bank.
PACKING CREDIT
This type of assistance may be considered by the bank to take care of
specific needs of the company when it receives some export order.
Packing credit is a facility given by the bank to enable the company to buy
the goods to be exported. If the company holds a confirmed export order
-
8/8/2019 Facor Project
18/39
placed by the overseas buyer or a letter of credit in its favour, it can
approach the bank for packing credit facility.
ASSESSMENT OF WORKING CAPITAL
A unit needs working capital funds mainly to carry current assets required
for its operations. Inadequate levels of working capital may result in
under-utilization of capacity and serious financial difficulties. Similarly
excessive levels may lead to unproductive use of credit and unnecessary
interest burden on the unit. Proper assessment of working capital
requirement may be done as under-
I. NORMS FOR INDUSTRY & RECIVIABLES
If the bank credit is to be linked with production requirements, it is
necessary to assess the requirements on the basis of certain norms. The
study group to frame guidelines to follow-up of bank credit (Tandon
Study Group) appointed by Reserve Bank of India had suggested the
norms for inventory and receivables regarding
-
8/8/2019 Facor Project
19/39
1: Major industries on the basis of company finance studies made by
Reserve Bank process periods in the different industries, discussions with
the industry experts and feed-back received on the interim report. Banks
make their own assessment of credit requirements of borrowers based
on a total study of borrowers business operations and they can also
decide the levels of holding each item of inventory as also of receivables
which in their view would represent a reasonable built up of current
assets for being supported by banks finance. Banks may also consider
suitable internal guidelines for accepting the projections made by the
borrowers regarding sundry creditors as sundry creditors are taken as a
source of financing current assets (inventories, receivables, etc.), it is
necessary to project them correctly while calculating need of bank
finance for working capital requirements.
II. COMPUTATION OF MAXIMUM PERMISSIBLE BANK FINANCE
The Tandon Study group had suggested the following alternatives for
working out the maximum permissible bank finance:-
a. FIRST METHOD OF LENDING:
Bank can work out the working capital gap. i. e. total current
assets less current liabilities other than bank borrowings and
finance a maximum of 75 per cent of the gap; the balance to come
out of long-term funds, i.e. owned funds and term borrowings
b. SECOND METHOD OF LENDING:
Borrower should provide for a minimum of 25 per cent of total
current assets out of long-term funds, i.e. owned funds and long
-
8/8/2019 Facor Project
20/39
term borrowings. A certain level of credit for purchases and other
current liabilities inclusive of bank borrowings will not exceed 75
per cent of current assets.
c. DRAWING POWER OF THE BORROWER
The drawing power that a borrower enjoys at any one point
depends on each components of working capital. The bank for
each component, which the borrower must hold as his contribution
to finance working capital, prescribes margins.
It may be observed from the above that borrowers contribution from
long term funds would be 25 per cent of the working capital gap under the
FIRST METHOD OF LENDING and 25 per cent of total current assets under
the SECOND METHOD OF LENDING. The above minimum contribution of
long-term funds is called minimum stipulated Net Working Capital (NWC)
which comes from owned funds and term borrowings.
III.CLASSIFICATION OF CURRNET ASSETS & CURRENT
LIABILITES:
In order to calculate net working capital & maximum permissible bank
finance, it is necessary to have proper classification of various items of
current assets & current liabilities. All illustrative lists of current assets &
current liabilities for the purpose of assessment of working capital are
furnished below;
Current assets: -
a. Cash and bank balances
-
8/8/2019 Facor Project
21/39
b. Investments
c. Receivables arising out of sales other than deferred receivables
(including bills purchased & discounted by bankers)
d. Installments by deferred receivables due within one year
e. Raw materials & components used in the process of manufactured
including those in transit
f. Stock in process including semi finished goods
g. Finished goods including goods in transit
h. Other consumable spares
i. Advance payment for tax
j. Prepaid expenses
k. Advances for purchases of raw materials, components &
consumable stores
l. Payment to be received from contracted sale of fixed assets during
the next 12 months
Current Liabilities:
a. Short-term borrowings (including bills purchased & discounted) from
I. Banks and II. Others
b. Unsecured loans
c. Public deposits maturing within one year
d. Sundry creditors (trade) for raw material & consumer stores &
spares
e. Interest & other charges accrued but no due for payments
f. Advances/progress payments from customers
-
8/8/2019 Facor Project
22/39
g. Deposits from dealers selling agents, etc.
h. Statutory liabilities
Provident fund dues
Provision for taxation
Sales-tax, excise, etc.
Obligation towards workers considered as statutory
i. Miscellaneous current liabilities
Dividends
Liabilities for expenses
Gratuity payable within one year
Any other payments due within one year
IV.INFORMATION / DATA REQUIRED FOR ASSEMENT OF
WORKING CAPITAL
In order to assess the requirements of working capital on the basis of
production needs, it is necessary to get the data from the borrowers
regarding their past/projected production, sales, cost of production, cost of
sales, operating profit, etc. in order to ascertain the financial position of
the borrowers & the amount of working capital needs to be financed by
banks, it is necessary to call for the data from the borrowers regarding
their net worth, long term liabilities, current liabilities, fixed assets, current
assets, etc. the Reserve Bank prescribed the forms in 1975 to submit the
necessary details regarding the assessment of working capital under its
credit authorization scheme. The scheme of credit authorization was
-
8/8/2019 Facor Project
23/39
changed into CREDIT MONOTORING ASSESEMENT in 1988. The forms used
under the credit authorization scheme for submitting necessary
information have also been simplified in 1991 for reporting the credit
sanctioned by banks above the cut-off point to reserve bank under its
scheme of credit monitoring arrangement.
In addition to the information/data in the prescribed forms, bank
may also call for additional information required by them depending on
the nature of the borrowers activities & their financial position. The data
is collected from the borrowers in the following six forms: -
1. PARTICULARS OF THE EXISTING/PROPOSED LIMITS FROM THE
BANKING SYSTEM (FORM I)
Particulars of the existing credit from the entire banking system as
also the term loan facilities availed of from the term lending
institutions/banks are furnished in this form. Maximum & minimum
utilization of the limits during the last 12 months outstanding balances
as on a recent date are also given so that a comparison can be made
with the limits now requested & the limits actually utilized during the
last 12 months.
2. OPERATING STATEMENT (FORM II)
The data relating to last sales, net sales, cost of raw material, power
& fuel, direct labour, depreciation, selling, general expenses, interest,
etc. are furnished in this form. It also covers information on operating
-
8/8/2019 Facor Project
24/39
profit & net profit after deducting total expenditure from total sale
proceeds.
3. ANALYSIS OF BALANCE SHEET (FORM III)
A complete analysis various items of last years balance sheet,
current years estimate & following years projections is given, in this
form. The details of current liabilities, term liabilities, net worth, current
assets, other non-current assets, etc. are given in this form as per the
classification accepted by banks.
4. COMPARATIVE STATEMENT OF CURRENT ASSETS & CURRENT
LIABILITES (FORM IV)
This form gives the details of various items of current assets and
current liabilities as per classification accepted by banks. The figures
given in this form should tally with the figures given in the form III
where details of all the liabilities & assets are given. In case of
inventory, receivables and sundry creditors; the holding/levels are
given not only in absolute amount but also in terms of number of
month so that a comparative study may be done with prescribed
norms/past trends. They are indicated in terms of numbers of months
in bracket below their amounts.
-
8/8/2019 Facor Project
25/39
5. COMPUTATION OF MAXIMUM PERMISSIBLE BANK FINANCE
(FORM V)
On the basis of details of current assets & liabilities given in form IV,
Maximum Permissible Bank Finance is calculated in this form to find out
credit limits to be allowed to the borrowers.
6. FUND FLOW STATEMENT (FORM VI)
In this form, fund flow of long term sources & uses is given to
indicate whether long term funds are sufficient for meeting the long
term requirements. In addition to long term sources and uses,
increase/decrease in current assets is also indicated in this form.
CREDIT MONITORING ARRANGEMENT
Consequent upon the withdrawal of requirement of prior authorization
under the erstwhile credit authorization scheme (CAS) and introduction of
a system of post sanction scrutiny under credit monitoring arrangement
(CMA) the database forms have been recognized as CMA database. The
revised forms for CMA database as drawn up by the sub-committee of
committee of directions have come into use from 1st April 1991.
The existing forms prescribed for specified industries continue to remain
in force. With a view to imparting uniformity to the appraisal system,
database from all borrowers including SSI units enjoying working capital
-
8/8/2019 Facor Project
26/39
limits of Rs. 50 lacs and more from the banking system should be
obtained.
The revised sets of forms have been separately prescribed for industrial
borrowers and traders/merchant exporters. The details of forms are as
under: -
Form 1: - PARTICULARS OF THE EXISTING/PROPOSED LIMITS FROM
THE BANKING SYSTEM (FORM I)
Form 2: - OPERATING STATEMENT
It contains data relating to gross sales, net sales, cost of raw material,
power and fuel, etc. It gives the operating profit and the net profit figures.
Form 3: - ANALYSIS OF BALANCE SHEET
It is complete analysis of various items of last years balance sheet;
current years estimate and following years projection are given in this
form.
Form 4: - COMPARATIVE STATEMENT OF CURRENT ASSETS &
CURRENT LIABILITES
Details of various items of current asset and current liabilities are given.
The figures in this form must tally with those in form III.
-
8/8/2019 Facor Project
27/39
Form 5: - COMPUTATION OF MAXIMUM PERMISSIBLE BANK
FINANCE FOR WORKING CAPITAL
The calculation of MPBF is done in this form to obtain the fund based
credit limits to be granted to the borrower.
Form 6: -FUND FLOW STATEMENT
It provides the details of fund flow from long term sources and uses to
indicate weather they are sufficient to meet the borrowers long term
requirements.
SECURITY
Banks need some security from the borrowers against the credit facilities
extended to them to avoid any kind of losses. Securities can be created in
various ways. Banks provide credit on the basis of the following modes of
security from the borrowers.
HYPOTHECATION: Under this mode of security, the banks provide credit
to borrowers against the security of movable property, usually inventory
of goods. The goods hypothecated, however, continue to be in possession
of the owner of the goods i.e. the borrower. The rights of the banks
depend upon the terms of the contract between borrowers and the lender.
-
8/8/2019 Facor Project
28/39
Although the bank does not have the physical possession of the goods, it
has the legal right to sell the goods to realize the outstanding loans.
Hypothecation facility is normally not available to new borrowers.
MORTGAGE: It is the transfer of a legal / equitable interest in specific
immovable property for securing the payment of debt. It is the
conveyance of interest in the mortgaged property. This interest
terminated as soon as the debt is paid. Mortgages are taken as an
additional security for working capital credit by banks.
PLEDGE: The goods which are offered as security, are transferred to the
physical possession of the lender. An essential prerequisite of pledge is
that the goods are in the custody of the bank. Pledge creates some kind of
liability for the bank in the sense that Reasonable care means care,
which a prudent person would take to protect his property. In case of non-
payment by the borrower, the bank has the right to sell the goods.
LIEN: The term lien refers to the right of a party to retained goods
belonging to other party until a debt due to him is paid. Lien can be of two
types viz. Particular lien i.e. A right to retain goods until a claim
pertaining to these goods are fully paid, and General lien, Which is
-
8/8/2019 Facor Project
29/39
applied till all dues of the claimant are paid. Banks usually enjoyed
general lien.
BANKING ARRANGEMENTS
Working capital is made available to the borrower under the following
arrangements;
CONSORTIUM BANKING ARRANGEMENT:
RBI till 1997 made it obligatory for availing working capital facilities
beyond a limit (Rs 500 million in 1997), through the consortium
arrangement. The objective of the arrangement was to jointly meet the
financial requirement of big projects by banks and also share the risks
involved in it. While consortium arrangement is no longer obligatory, some
-
8/8/2019 Facor Project
30/39
borrowers continue to avail working capital finance under this
arrangement. The main features of this arrangement are as follows;
Bank with maximum share of the working capital limits usually takes the
role of lead bank.
Lead bank, independently or in consultation with other banks, appraise
the working capital requirements of the company. Banks at the consortium
meeting agree on the ratio of sharing the assessed limits. Lead bank
undertakes the joint documentation on behalf of all member banks. Lead
bank organizes collection and dissemination of information regarding
conduct of account by borrower.
MULTIPLE BANKING ARRANGEMENT
Multiple banking is an open arrangement in which no banks will take
the lead role. Most borrowers are shifting their banking arrangement to
multiple banking arrangements. The major features are
Borrower needs to approach multiple banks to tie up entire requirement of
working capital. Banks independently assessed the working capital
requirements of the borrower. Banks, independent of each other, do
conduct documentation and monitoring of account. Borrowers deals with
all financing banks individually.
-
8/8/2019 Facor Project
31/39
SYNDICATION
A syndicated credit is an agreement between two or more lenders to
provide a borrower credit facility using common loan agreement. It is
internationally practiced model for financing credit requirements, wherein
banks are free to syndicate the credit limit irrespective of quantum
involved. It is similar to a consortium arrangement in terms of dispersal of
risk but consist of a fixed repayment period.
-
8/8/2019 Facor Project
32/39
CORPORATE PROFILE
The history of Ferro Alloys Corporation Ltd popularly known as "FACOR"
can be traced back to 1956. It started its operation with Ferro Manganese
production and slowly diversified into production of Ferro Chrome and
Charge Chrome. Today, FACOR is already a name to reckon with in Ferro
Alloys industry, both at home and abroad. The Charge Chrome Plant at
Bhadrak in Orissa State is 100% Export Oriented Unit. The Ferro Chromedivision in Andhra Pradesh also exports 40% to 50% of its products to
quality conscious customers in South-east Asian and European Countries.
As a major step towards forward integration, FACOR took over a mini steel
plant in 1978 for manufacture of Alloy, Special and Stainless Steels.
Thereafter, through innovative and sophisticated technological
developments, FACOR (Steel Division) has been able to develop and
manufacture critical grades of alloy and stainless steel to meet stringentrequirements of customers both at home and abroad. It is now a leading
alloy steel producer of the country and has been successful in exporting
special stainless steel products all over the worlds with a focus on
developed countries, apart from catering to critical requirements of
Automobile, Railways, Defence, Chemical, Heavy Machinery and
Engineering sectors in the domestic market.
MARKETS CATERED
FACOR steel produces and sells high quality stainless steels and speciality
steels that meet a variety of demands. We design our product mix to cater
to almost all leading automobile and engineering industries. Our products
withstand the extreme environments in which they are used. Our people
are attentive to customers' needs in an increasingly complex businessenvironment. Industries being catered to by
-
8/8/2019 Facor Project
33/39
FACOR today are -
(1) FORGING INDUSTRY
(2) AUTO COMPONENT INDUSTRY
(3) FASTNERS INDUSTRY(4) RAILWAY SPRINGS
(5) BRIGHT BAR INDUSTRY
(6) CHEMICAL AND CORROSION INDUSTRY
(7) SURGICAL EQUIPMENT INDUSTRY
(8) VALVE INDUSTRY
(9) BOILERS
FACOR also supply special steel for critical applications like Aerospace,
pressure equipments etc. and have successfully developed over 500 steel
grades in plant over period of time.
To cater the growing demand from auto sector and heavy engineering
sector for forged rounds, FACOR STEELS LTD. has set up a modern forging
unit at its existing plant and the commercial production has
started from 10th July, 2009 onwards. The company with its enhancedcapacity of ingot production and capability to provide higher diameter
forged rounds is ready to fulfil the global and domestic demand in Non-auto
sectors like sugar Mill, Cement Plants, Heavy machinery units etc. There is
a huge supply-demand gap in this sector and FACOR STEELS LTD. is rightly
poised to cater to this segment.
We are accredited for our quality management system by ISO/TS 16949 -
2002, AO 2000-Merkblatt WO & PED 97/23/EC, also we are going forcertification of Lloyds Register & DNV for supplies to Ship Building Industry.
MARKET SHARE
Through innovative technologies FACOR Steel meets customer
requirements, both in terms of quality and deliveries, which has helped us
to improve our share in Auto & Engineering industry. Our customers as on
-
8/8/2019 Facor Project
34/39
date number more than 150 reputed manufacturers throughout the length
and breadth of the country.
STRENGTH
Our inherent strengths lie in meeting the requirements of critical grades,
even in smaller quantities of say 1 to 1.5 MT, in our wide product range in
shortest possible time of 4 to 6 weeks. We can adapt to rapid changes in
domestic as well as global market by careful adjustment in product mix.
BOARD OF DIRECTORS
Sr.No Name
1.Shri Narayandas D. Saraf
( Chairman & Whole Time Director)
2.Shri Murlidhar D. Saraf
(Vice Chairman & Managing Director)
3.Shri Vinod V. Saraf
(Managing Director)
4.Shri Anurag M. Saraf
(Joint Managing Director)
5.Shri P. K. Kukade
(Director)
6. Shri Anand S. Kapre( Director )
7.Shri Mahendra B. Thaker
(Director)
8.Mr. Arye Berest
(Director)
9.Shri P K S Nair
(Nominee Director, Bank of India)
10.Shri Ashim R. Saraf
(Alternate Director to Mr. Arye Berest)
11.Shri Vibhu Bakhru
(Director)
Certificates
ISO/TS 16949:2002
We Facor Steels Ltd. has accreditation of IRQS and awarded ISO/TS
16949:2002 certification in 2008. The scope of approval is for
manufacture Carbon, Alloy, Stainless & special Steels. The certification no
IRQS/0850766 is valid till 2011. We first achieved ISO certification in 1994
and ISO 9001:2000 in 2004. We are maintaining the system and ourcertification since then.
-
8/8/2019 Facor Project
35/39
TUV NORD System Gmbh& co
TUV NORD the international certification agency has recognized us as
manufacturer according to AD 2000- Merkblatt w0. Also approved for
Quality System according to pressure Equipment Directive 97/23/EC for
Stainless steel, Alloy Steel, Ingots, Rolled products and Bright bars as per
the annexure.
-
8/8/2019 Facor Project
36/39
STATEMENT OF OBJECTIVES
-
8/8/2019 Facor Project
37/39
To know the various types of working capital finance provided by
banks.
To analyze in detail the procedure of assessment of working capital
finance extended by bank.
To apply these procedure at a practical level with the help of case
studies.
STATEMENT OF LIMITATION
To main the secrecy of accounts and records of company data taken
are hypothetical and actual data is camouflaged to maintain
business secrecy.
SOURCES OF DATA
Source of information for this project is only secondary data. The
information about the company is all gathered from information
available on the website, annual report, CMA report of the company,
journal and reference book.
TECHNIQUE OF DATA ANALYSIS
-
8/8/2019 Facor Project
38/39
Data gathered is analysed through using FINANCIAL RATIO`S to determine
the liquidity and profitability of the organisation. This shows the clear
picture of performance and management of cash in organisation.
-
8/8/2019 Facor Project
39/39
DATA ANALYSIS AND INTERPRETATION.
top related