extrusion - · pdf fileextrusion manual feeding at 1,5m from ground of sheets, pipes and...

EXTRUSIONManual feeding at 1,5m from ground of sheets,pipes and profiles 6 m long

Single and double traction groups with pneumaticdancing arms and inverter ensures steady feedof edge trim/s ( up to 100m/min) and constant tensionwith the production machine

G rinding chamber with 3, 5 or 7 rotary blades,for processing all resins P LA A B S EP S P ET and allproducts, expanded, honeycomb, full and deep sheets

Special applications for custom systems, cuttingdevices, inj ectors and infeed rollers, unwindersand special coating

Your recycling needs. Our grinding solutions.

Efficient solutionsRegrind quality material

Energy efficiency Easy operation and maintenance

Homogeneous and uniform regrind constantlyproduced. Mechanical and physical properties ofplastics unchanged.

Systems supplied to meet all healt and safety requirements and standards. Diverse production range of machines for recovery of scraps of varying size and weight.

Lowest running cost expressed in kWh/kg available on the market. Reaction power cosφ reduced to minimum thus having a direct impact on hourly energy cost.

Reduced mainenance frequency and downtimeby advance engineering design. Safety of operator during use and maintenance.

- Efficient and precise grip thanks to the dedicated grinding chamber section

- Easy tool free access to screen, hopper, cutting chamber

- On board soundproofing for in-line productions

- Transmission design gives higher inertia: only 10% of installed power consumed during non productive operation; 30-50% during grinding time

© Tr

ia 20

16 -

XT01

rev.0

0

System

Our granulators

XT SeriesX T 3530X T 5030X T 6 04 2X T 9 04 2X T 12 04 2X T 7 06 0X T 1106 0X T 1008 0X T 1508 0

TRK SeriesTRK 4 2 2 0TRK 5030

TPL SeriesTP L 5030TP L 6 04 2TP L 9 04 2TP L 1106 0

Y our recycling needs. Our grinding solutions.

TRI A I talywww.triaplastics.com

TRI A A mericaTRI A B razil

TRI A C hinaTRI A G ermany