euroflo pumps product range - hooverdale industrial …hooverdale.com/downloads/euroflo.pdf ·  ·...

Euroflo Pumps Product Range

EPI Singapore

Prepared

By

Max Chiew

2008

Table of Contents• Euroflo Pump International –

introduction– Introduction

• Product Range– EU/EUM – End Suction– EJS/ T – Self Priming– ESCA/O – Split Casing– EILM – Vertical in-line– EOH – Self Priming Turbine

pumps– EMS – Multistage pump

Introduction• Started manufacturing in 1989

– Mainly to supply to Water works and Plumbing

• Boom of the Marine industry in the early 90’s enable us to expend beyond our shore because of ship all over the world that docked in our water and so carry our brands over the world.

• In 2003 we moved to China to manufacture and capitalized on the low cost factor and coupled with Singapore’s outstanding business ethic recognized over the world.

• 2007 - purchase of 340,000 ft2factory space in china sustain our growth and demand of pumps.

• a 132kw test bay was constructed in Singapore to support our after sales and to boost customer’s confidence. Also the assurance of our products.

• By 2009 Q1 – our new 350kw test bay will be ready to cope with demands.

• It enable us to a reach to the world that we never had previously.

– Successfully tested and inspected by BV,ABS, FM, Lloyds', DNV and RINA to name afew.

Euroflo Pumps Product Range

EPI Singapore

EU Series – Centrifugal End SuctionEN733/ DIN 24255

DN: 32 -400Q: 2,100 m3/hrH: up to150mNs: up to 3600 rpmOT: -10°C to 105°C(150°C Optional) Flange: DIN2332; (optional ANSI B16.5B)

Material:Cast Iron, Ductile Iron, Bronze, Stainless Steel

EUM – Mono Bloc End Suction Pump

DN: 32 -125Q: 4 m3/hr - 540 m3/hrH: up to100mNs: up to 3600 rpmT: -10°C to 105°C

150°C Optional Flange: DIN2332; optional ANSI B16.5BMaterial:

Cast Iron, Ductile Iron, Bronze, Stainless Steel

Stub design to suit different make of motor

Extra bearing reduces vibration and improve MTBF

Chemical Process pumps - ISO 2858/5199

DN: 25 – 250mmQ: 1200 m3/hrH: up to150mNs: up to 3600 rpmOT: -45°C to 350°CFlange: DIN2332; (optional ANSI B16.5B)

Material:Cast Iron, Carbon Steel, Stainless Steel

EJ series – Self Priming PumpDN: 40 - 200Q: 500 m3/hrH: up to 58mNs: up to 3600 rpmT: 10°C to 80°C

120°C Optional Flange: DIN2332; optional ANSI B16.5BMOC:

Cast Iron, Ductile Iron, Bronze, Stainless Steel

EJT – Self Priming PumpDN: 50 - 300Q: 1,250 m3/hrH: up to 65mNs: up to 3600 rpmT: 10°C to 80°C

120°C Optional Flange: DIN2332; optional ANSI B16.5BMOC:

Cast Iron, Ductile Iron, Bronze, Stainless Steel

ESC – Horizontal Split Casing Pump

• DN: 50 - 1000• Q: 18,000 m3/hr• H: 150,up to 180m• Ns: up to 3600 rpm• T: -10°C to 105°C

– 150°C Optional • Flange: DIN2332; optional

ANSI B16.5B• MOC:

– Cast Iron, Ductile Iron, Bronze, Stainless Steel or Duplex Stainless steel

EILM – Vertical In-line PumpDN: 32 – 300mmQ: 4 m3/hr – 1080 m3/hrH: up to125mNs: up to 3600 rpmT: -10°C to 105°C

120°C Optional Flange: DIN2332; optional ANSI B16.5BMOC:

Cast Iron, Carbon Steel, Bronze, Stainless Steel

EOH – Self Priming Turbine Pump

• DN: 32 - 80• Q: 0.3 to 30 m3/hr• H: up to 310m• Ns: up to 1800 rpm

• T: up to 110°C– 140°C Optional

• Flange: DIN2501; optional ANSI B16.5B

• MOC:– Cast Iron, Bronze,

Stainless Steel

EMS – Horizontal and Vertical Multistage Pump

• DN: 32 - 200• Q: 500 m3/hr• H: up to140m• Ns: up to 3600 rpm• T: -20°C to 105°C• Flange: DIN2332;

optional ANSI B16.5B• MOC:

– Cast Iron, Bronze, Stainless Steel

Our support

Data Sheet

Sectional drawing

Curves

GA drawing

Our Commitment

Value Add

Test Bay – ISO 9906 Grade 1 & 2