endeavour 101 version 4.4 - blaupunkt€¦ · 9 note: the upgrade process remains in the display...
Post on 21-Sep-2020
1 Views
Preview:
TRANSCRIPT
Instructions for software installation
ENDEAVOUR 101
Version 4.4.2
English
2
Installation
Dear user,
to the latest update for your device to download please carefully follow the instructions that are described here.
ATTENTION! This software update will reset the device to factory settings. Be sure to save your personal data (videos, pictures, music, etc.) on an SD card, or your PC before you begin. Your apps (free and fee-based) can you download again free after the upgrade by logging on again with the
original Google account, in the Google Play Store.
To perform this upgrade / installation, you need a PC or laptop in order to
download the required software and transferred to the device can. Make
sure that the device still has at least 50% battery remaining capacity and
fully off. Not only in standby!
Step by step installation software on the PC
1. Please download from the Blaupunkt website the file: PhoenixSuit_EN.zip and unpack it eg to your desktop.
2. By double clicking on the file (PhoenixSuit_EN.msi) to start the installation process.
3
3. If the following security warning appears, click Run.
4. Then, click Next to continue with the configuration for installation.
5. In the next window, please confirm with Next the location for the program.
4
6. By confirming with Next in the next window, the installation process begins.
7. During the installation process of the software still opens another window (left). Click the Next button to install the required drivers.
5
8. Next, click in the left window (driver installation) please click on Finish to complete the process.
9. Then the installation should be completed successfully. To complete this process then please click on Close.
10. On your desktop you will now find the following icon updating software:
6
Step by step software update on your tablet
1. Download from the Blaupunkt website please file: FW_Endeavour101_4.4.2.zip and unpack it eg to your desktop.
2. Please make a double click on the upgrade software icon:
3. In the main window of the software update, please click on the anchor (top center).
4. Here you please right click on the item image.
5. Then please select the memory location (eg desktop) where you saved the update software.
7
6. Then connect the USB cable to the PC / laptop. Press and hold the home- button at the powered off device, connect the Micro USB cable to the Endeavour 101, continue to hold the home- button and then press 5-6 times the on-off button while still holding the home-button.
Power
Home
8
7. To begin the update process, confirm the following two messages with
YES.
Power
Home
9
Note: The upgrade process remains in the display (3%) for about 30 - 40 seconds and then continues. Do not disconnect at this time the connection between the PC / laptop and the Endeavour 101, or by pressing a key try cancel the operation.
8. Once the update process has completed successfully, you can finish the process with OK. The Endeavour 101 will automatically reboot and restart.
10
9. To exit the software, please click on the top right X and confirm with YES.
IMPORTANT NOTE: Please do not interrupt in any case the update process until the tablet is rebooted! The file system may be damaged and
fail to start. This damage is not covered by the warranty and requires a paid repair.
top related