ecofriendly solutions at work - smb datacenters

EcoFriendly solutions at work – SMB DatacentersEcoFriendly solutions at work – SMB DatacentersEcoFriendly solutions at work – SMB DatacentersEcoFriendly solutions at work – SMB Datacenters

Allied Telesis SolutionsAllied Telesis Solutions

Eco Friendly switchesEco Friendly switches

Why bother ? Why bother ?

Eco Friendly switches – Why?Eco Friendly switches – Why?

• In 2005, 1% of worldwide electricity was used in data centers, and rate was growing at 14% per annum – J. Koomey, LBNL

• 2% of all C02 generated is from computers – the same amount as air transport – Gartner 2006

• 9.4% of US Electricity is used to power the Internet – Forrester 2007

• 3 to 5% of global consumption of energy spent to run Internet!!! – PC World 2010

• One Google search consumes enough electricity to run an 11-watt, energy-saving lightbulb for 15 minutes

Allied Telesis SolutionsAllied Telesis Solutions

How do you build an Eco Friendly switch ?How do you build an Eco Friendly switch ?

LogoLogo

Change manufacturing processChange manufacturing process• Allied Telesis build assemblies to meet the higher RoHS level 6

(lead free) standard.– RoHS level 5 allows the continued use of lead solder in networking

equipment– Manufacturing to RoHS level 6 requires redesigns of all PCB (printed circuit

boards) as the liquid lead-free solder has very different physical properties• Allied Telesis uses water-based technology to clean chemicals from

PCBs and not petrol/chemical-based solvents.

– An estimated 38.000 liters per year of solvent-based cleaner has been saved by adopting water-based technology

• Allied Telesis uses re-cycled water, and re-cycles water from our manufacturing facilities ensuring minimal impact to the environment.

Go even greenerGo even greener

Hardware designHardware design

Single ChipGigabit

EthernetSwitch

PowerSupply

Eth

erne

t C

able

s

Connectors Line Drivers

Main CoolingFan

LED Indicators

LED Drivers

ACInput

Hardware designHardware design

Single ChipGigabit

EthernetSwitch

PowerSupply

Eth

erne

t C

able

s

Connectors Line Drivers

Main CoolingFan

LED Indicators

LED Drivers

ACInput

High Efficiency Power Supply – up to 85%+

Hardware designHardware design

Single ChipGigabit

EthernetSwitch

PowerSupply

Eth

erne

t C

able

s

Connectors Line Drivers

Main CoolingFan

LED Indicators

LED Drivers

ACInput

Remove the Fan, or reduce the speed:

•Requires less power (smaller PSU).•Reduced Noise.•Increases Reliability do to fewer (less) moving parts.

Hardware DesignHardware Design

Single ChipGigabit

EthernetSwitch

PowerSupply

Eth

erne

t C

able

s

Connectors Line Drivers

Main CoolingFan

LED Indicators

LED Drivers

ACInput

Line Drivers can significantly reduce power:

• Measure and Minimise – Automatically measure the cable length, and only apply the necessary power.• Power down ports when not needed – (overnight, weekends, ..)• ‘Sleep’ Mode – reduce power when not connected – no active link.

Hardware DesignHardware Design

Single ChipGigabit

EthernetSwitch

PowerSupply

Eth

erne

t C

able

s

Connectors Line Drivers

Main CoolingFan

LED Indicators

LED Drivers

ACInputTurn off LED Indicators when not needed.

• Simple front panel switch to turn on/off the LEDs.• Reduces Power requirements, reduces heat, increases reliability.

Hardware DesignHardware Design

Single ChipGigabit

EthernetSwitch

PowerSupply

Eth

erne

t C

able

s

Connectors Line Drivers

Main CoolingFan

LED Indicators

LED Drivers

ACInput

Use of Latest Technology Silicon:• High levels of integration – fewer chips• Better Chip geometries (65nm) for lower power

“Green” User Interface

ResultsResults

– AT-FS705LE 1.3W– AT-FS708LE 1.49W– AT-9000/28 30.14W– AT-9000/28SP 36W – AT-9000/52 46.92W– AT-8000S/24 26.5W– AT-8000S/48 32.6W– AT-8000GS/24 40W– AT-8000GS/48 65W

Let’s put it another wayLet’s put it another way

52 million cups of tea boiled with the saved energy. (British cups that is)

Allied Telesis SolutionsAllied Telesis Solutions

SMB Datacenters SMB Datacenters

Data Center TrendsData Center Trends» Customer requirements

– Reducing power consumption– CONSOLIDATION– VIRTUALIZATION

Converge Networks

Energy Efficiency

SOX ComplianceData Center Consolidation

» Scalability on demand

» Network resiliency

» Reduced TCO

Multimedia Application Support

Major Requirements

SLA

Anatomy of a Cluster – PhysicalAnatomy of a Cluster – Physical» I/O fabric

– Ethernet – Quadrics – Myrinet– InfiniBand

» OOB management fabric– Ethernet– Serial

» Storage– Direct Attached Storage (DAS)– Network Attached Storage (NAS)– Full Storage Area Network (SAN)

» SAN fabric– Fiber channel– iSCSI w/ Ethernet– InfiniBand

Datacenter requirementsDatacenter requirements

Ethernet Interfaces (GbE, 10GbE, CX4/DA...)

High Performances (Low latency and non blocking switching)

Protocols Support (L2…

Mechanical/Airflow

End of Row and Top-of-Rack Aggregation

High Availability

High AvailabilityHigh Availability

Redundant Stackable core

– Link Aggregate across the VC-Stack

– High Redundant Network

– No STP or VRRP is necessary

– Easy to design to configure and to maintain

End-of-Row / Top-of-Rack / Aggregation

Aggregate rows of servers into an End-of-Row switch

» Allows dense aggregation

» Less switches in network

Aggregate rows of servers into an End-of-Row switch

» Allows dense aggregation

» Less switches in network

Connect one rack of servers into a Top-of-Rack switch

» Allows plug-and-play racks» Simplified cable

management

Top-of–Rack switches interconnect trough an Aggregator switch

Connect one rack of servers into a Top-of-Rack switch

» Allows plug-and-play racks» Simplified cable

management

Top-of–Rack switches interconnect trough an Aggregator switch

» Rack systems are extremely packed with servers and storage

» 42 rack unit height space needs to be maximized for computing power

End-of-Row switch

Aggregator switchTop-of-Rack switches

How does it look like?How does it look like?

Services

Americas Headquarters | 19800 North Creek Parkway | Suite 100 | Bothell | WA 98011 | USA | T: +1 800 424 4284 | F: +1 425 481 3895

Asia-Pacific Headquarters | 11 Tai Seng Link | Singapore | 534182 | T: +65 6383 3832 | F: +65 6383 3830

EMEA Headquarters | Via Motta 24 | 6830 Chiasso | Switzerland | T: +41 91 69769.00 | F: +41 91 69769.11

© 2011 Allied Telesis Inc. All rights reserved. Information in this document is subject to change without notice. All company names, logos, and product designs that are trademarks or registered trademarks are the property of their respective owners.

Thank you!