ece 554 hw tutorial
Post on 31-Dec-2015
22 Views
Preview:
DESCRIPTION
TRANSCRIPT
ECE 554 HW TutorialECE 554 HW Tutorial
Spring 2002www.engr.wisc.edu/ece/courses/ece554.html
OBJECTIVESOBJECTIVES
Hardware setup Configuration (.bit) download Introduction to logic analyzer
Hardware setupHardware setup
Probe CLK pin and ground it properly Turn on the equipment Make sure that all the knobs on the pulse
generator are at the “black” mark Adjust the clock frequency and read it
from the scope
Configuration DownloadConfiguration DownloadParallel Cable
Serial Cable
NT machine running
GXSTools V.3.3
- GXSLoad
- GXSPort
ManualsManuals
GXSTools V.3.3 (Being used)– GXSLoad– GXSPort
GXSTools V.4.0 (Coming soon)– GXSLoad – GXSPort
Logic Analyzer: FunctionalityLogic Analyzer: Functionality
Timing AnalyzerState Analyzer
Timing Analyzer: How it worksTiming Analyzer: How it works
Synchronizes with target CLKSamples every 1/fs = 2n *4 ns, n=0,1,..
It has limited amount of storageSamples with a transition detectorSet the right fs for your signals
Sampling at high resolutionSampling at high resolution
Sampling with a transition Sampling with a transition detectordetector
Triggering on eventsTriggering on events
State Analyzer: State TriggerState Analyzer: State Trigger
State TriggerState Trigger
State Analyzer: Hex codes State Analyzer: Hex codes translated into assembly codetranslated into assembly code
SRAM LoaderSRAM Loader
Left Right
32-bit data
19-bit addr
MSBs LSBs
512 k words
WEBOEB
Logic Analyzer and XSV BoardLogic Analyzer and XSV Board
Pod A[15:0]=Data[31:16]
Pod B[15:0]= Data[15:0]
Pod C[15:0]=Addr[15:0]
D[0]=CLK,D[1]=WEB,D[2]=OEB
top related