dynamo metrics & reporting localization guide · r200.1 dynamo metrics & reporting...
Post on 16-Sep-2018
253 Views
Preview:
TRANSCRIPT
DynAMo
Metrics & Reporting
Localization Guide
M&R200-MG
R200.1
Apr 2017
Release 200.1
ii DynAMo Metrics & Reporting Localization Guide R200.1 Apr 2017
Notices and Trademarks
Copyright 2010 by Honeywell International Sárl. Release 200.1 Apr 2017
While this information is presented in good faith and believed to be accurate, Honeywell disclaims the implied warranties of merchantability and fitness for a particular purpose and makes no express warranties except as may be stated in its written agreement with and for its customers.
In no event is Honeywell liable to anyone for any indirect, special or consequential damages. The information and specifications in this document are subject to change without notice.
Honeywell and Experion PKS are registered trademarks of Honeywell International Inc.
Other brand or product names are trademarks of their respective owners.
Honeywell Process Solutions
1860 W. Rose Garden Lane
Phoenix, AZ 85027 USA
1-800 822-7673
R200.1 DynAMo Metrics & Reporting Localization Guide iii Apr 2017
Contact Information
Seeking technical assistance For technical queries, contact Honeywell Customer Support.
For contact information, visit:
https://www.honeywellprocess.com/en-US/contact-us/customer-support-
contacts/Pages/default.aspx
Reporting a security vulnerability For the purpose of submission, a security vulnerability is defined as a software defect or
weakness that can be exploited to reduce the operational or security capabilities of the
software.
Honeywell investigates all reports of security vulnerabilities affecting Honeywell
products and services.
To report a potential security vulnerability against any Honeywell product, follow the
instructions at: https://honeywell.com/pages/vulnerabilityreporting.aspx.
Submit the requested information to Honeywell using one of the following methods:
Send an email to security@honeywell.com.
Contact your local Honeywell Technical Assistance Center (TAC).
Providing documentation feedback To provide feedback about this document, or to report errors and omissions, write to us
at:
hpsdocs@honeywell.com
R200.1 DynAMo Metrics & Reporting Localization Guide v Apr 2017
Contents
1. INTRODUCTION ............................................................................9
1.1 About localizing DynAMo Metrics & Reporting ........................................... 9 Overview ................................................................................................................................9 About resource files (DLL)......................................................................................................9 About localization source files (TTR) ......................................................................................9 About localization project files (TTP) ......................................................................................9
1.2 Workflow for localizing Metrics & Reporting ............................................. 10
2. GENERATING LOCALIZED RESOURCE FILES ........................ 11
2.1 Overview ........................................................................................................ 11
2.2 Installing localization tool ............................................................................ 11
2.3 Translating resource strings ........................................................................ 11
2.4 Building resource files ................................................................................. 14
2.5 Fetching text strings from database ........................................................... 15
3. DEPLOYING RESOURCE FILES ................................................ 16
3.1 Overview ........................................................................................................ 16
3.2 Getting resource files signed ....................................................................... 16
3.3 Deploying a Resource File (DLL) ................................................................. 16 Normal deployment .............................................................................................................. 16 Global Assembly Cache (GAC) deployment ........................................................................ 17
3.4 Finalizing resource file deployment ............................................................ 18
3.5 Localizing system messages ....................................................................... 18
4. CONFIGURING REMOTE CLIENTS ............................................ 19
4.1 Overview ........................................................................................................ 19
4.2 Configuring language settings in browser ................................................. 19
4.3 Limitations ..................................................................................................... 19
Contents Tables
vi DynAMo Metrics & Reporting Localization Guide R200.1 Apr 2017
5. LOCALIZATION PROJECTS IN METRICS & REPORTING ....... 20
5.1 Overview ......................................................................................................... 20
5.2 List of localization projects .......................................................................... 20 Overview ............................................................................................................................. 20 AMS.ttp ............................................................................................................................... 21 CollectorArchiver.ttp ............................................................................................................ 21 DLM.ttp ................................................................................................................................ 22 DLMTimeControl.ttp ............................................................................................................ 22 ShiftTime.ttp ........................................................................................................................ 22 MES Foundation.ttp ............................................................................................................. 23 MESFoundation Services.ttp ............................................................................................... 25 CAM.ttp ............................................................................................................................... 26 DAS.ttp ................................................................................................................................ 26 Operations Shift.ttp .............................................................................................................. 28 OPCHDAPlugin.ttp .............................................................................................................. 29 Notifications.ttp .................................................................................................................... 29 NotificationDisplays.ttp ........................................................................................................ 30 EmailDispatcher.ttp ............................................................................................................. 31 TimeManagement.ttp .......................................................................................................... 31
Contents
Tables
R200.1 DynAMo Metrics & Reporting Localization Guide vii Apr 2017
Tables No table of figures entries found.
Contents
viii DynAMo Metrics & Reporting Localization Guide R200.1 Apr 2017
Figures No table of figures entries found.
1. Introduction
1.1. About localizing DynAMo Metrics & Reporting
R200.1 DynAMo Metrics & Reporting Localization Guide 9 Apr 2017
1. Introduction
1.1 About localizing DynAMo Metrics & Reporting
Overview
By default, the Metrics & Reporting application is available in English language only. If
you want Metrics & Reporting in any other language, you can use the instructions
provided in this document to:
Get the list of text strings used in the application.
Translate the text strings into the required language.
Package the translated text strings into deployable localization resource (DLL) files.
Get the resource files digitally signed by Honeywell.
Deploy the signed resource files.
About resource files (DLL)
All the text strings (display names of the fields, error and warning messages, etc.,)
displayed in the Metrics & Reporting screens are stored in resource files (DLL). During
runtime, Metrics & Reporting dynamically reads the text strings from these resource files
and displays them in the screens.
When you install the Metrics & Reporting application, a default set of resource files are
installed along with the application. These resource files contain the text strings for
English language.
If you need to localize Metrics & Reporting to a different language, you must generate
localized resource files and deploy them over the default (English) resource files.
You can create localized resource files using the Honeywell Intuition Localization Tool.
For instructions for installing and using the Honeywell Intuition Localization Tool, refer
to the chapter “Generating localized resource files” on page 11.
About localization source files (TTR)
The list of text strings used by the Metrics & Reporting application are stored in
localization source files (TTR). You can edit the text strings in a TTR file using the
Honeywell Intuition Localization Tool.
When you compile a TTR file, a deployable localization resource (DLL) file is generated.
About localization project files (TTP)
One or more TTR files are grouped together into a localization project file (TTP). When
you open a project file in the Honeywell Intuition Localization Tool, all the TTR files
associated with it are opened.
1. Introduction
1.2. Workflow for localizing Metrics & Reporting
10 DynAMo Metrics & Reporting Localization Guide R200.1 Apr 2017
1.2 Workflow for localizing Metrics & Reporting Localizing the Metrics & Reporting application includes:
1. Identifying the localization project (TTP) files available in Metrics & Reporting.
For the list of TTP files, refer to the chapter “Localization projects in Metrics &
Reporting” on page 20.
2. Translating the resource strings present in the localization project files.
For instructions, refer to the section “Translating resource strings” on page 11.
3. Generating a deployable localization resource (DLL) file.
For instructions, refer to the section “Building resource files” on page 14.
4. Deploying the localized resource files.
5. For instructions, refer to the chapter “Deploying resource files” on page 16.
2. Generating localized resource files
2.1. Overview
R200.1 DynAMo Metrics & Reporting Localization Guide 11 Apr 2017
2. Generating localized resource files
2.1 Overview This chapter explains how to:
install the localization tool
translate resource strings using the localization tool
generate localized resource files
2.2 Installing localization tool The installation files for the localization tool are available in the Honeywell Intuition
Localization Tool folder within the DynAMo Metrics & Reporting installation media.
For instructions on installing the localization tool, refer to the Honeywell Intuition
Localization Tool Installation Guide that is available along with the installation files
under the Documents sub-folder.
2.3 Translating resource strings This section explains how to modify the default text strings present in a localization
source file.
1. Choose Start > All Programs > Honeywell > Localization Tool.
The Localization Tool dialog box appears.
2. Choose File > Open., and select the localization project file (TTP) that you want to
translate.
ATTENTION: Do not open the TTP files directly from the media. Ensure that the
TTP fils and their associated TTR files are not “Read-Only”.
2. Generating localized resource files
2.3. Translating resource strings
12 DynAMo Metrics & Reporting Localization Guide R200.1 Apr 2017
The Localization Tool dialog box appears.
The tree on the left pane lists all the TTR files present in the project.
ATTENTION: For some TTR files in the MES Foundation.TTP project, you must
fetch the latest text strings from the Metrics & Reporting Database server. Follow
the instructions provided in the section “Fetching text ” on page 15.
3. To translate the English text strings in the TTR files to another language:
a. Right-click the root node and choose Add Language.
The Add Language dialog box appears.
b. Select the required language and click OK.
2. Generating localized resource files
2.3. Translating resource strings
R200.1 DynAMo Metrics & Reporting Localization Guide 13 Apr 2017
The selected language is added as a child node under each TTR file.
c. Under each TTR file node, click the newly added language node:
A grid appears and displays the following fields:
Name – Displays the name of the text.
Default Value – Displays the default display name of the text
<selected_language> – Allows you to specify a different name to be
displayed in the Metrics & Reporting screens instead of the default value.
Localized – Allows you to indicate whether you have changed the value of
the field or not.
d. In each row, type the localized version of the text string in the
<selected_language> column.
4. Similarly, translate the text strings in all the TTR files listed on the left pane.
5. Save the file.
2. Generating localized resource files
2.4. Building resource files
14 DynAMo Metrics & Reporting Localization Guide R200.1 Apr 2017
2.4 Building resource files After translating the resource strings in the TTR files, you can build resource files (DLL)
as follows:
1. In the Localization Tool dialog box, choose File > Build Output/Package.
The Build Output/Package dialog box appears.
2. With the default selections unchanged, click Build.
3. The resource file (DLL) is created in the <language_suffix> folder within the output
directory. (The path of the output directory is displayed in the Output Directory
field)
4. <language_suffix> is a two-letter code for the language that you selected. (eg. de-
DE for German, zh-CN for Simplified Chinese)
2. Generating localized resource files
2.5. Fetching text strings from database
R200.1 DynAMo Metrics & Reporting Localization Guide 15 Apr 2017
2.5 Fetching text strings from database When you open the MES Foundation.TTP project in the Localization Tool for
translation, some of the TTR files may contain outdated text strings. The Localization
Tool needs to connect to the Metrics & Reporting Database server to fetch the latest text
string and display them in the grid.
Hence, you must configure the connection to the database server and refresh the list of
text strings displayed in the Localization Tool as follows:
1. In the Localization Tool dialog box, open the MES Foundation.TTP project.
2. Refresh the list of text strings under Navigation Description as follows.
a. On the left pane, right-click Navigation Description and choose Edit Context.
The Repository - Intuition Navigation Description Resource Plug-in dialog box
appears.
b. In the Details tab, type the correct database name in the Database Name box.
c. Click OK to save the changes and close the dialog box.
d. Right-click Navigation Description and click Reload Repository.
3. Similarly, refresh the list of text strings under Navigation Data.
3. Deploying resource files
3.1. Overview
16 DynAMo Metrics & Reporting Localization Guide R200.1 Apr 2017
3. Deploying resource files
3.1 Overview All localized resource (DLL) files must be digitally signed by Honeywell before you can
deploy the files. There are two different ways of deploying the signed DLL files.
Different DLLs need to be deployed in different ways.
This chapter explains how to deploy the localized resource files.
3.2 Getting resource files signed You must send your TTR, TTP, and DLL files to Honeywell for signing. Contact
Honeywell Support fo more details.
After you receive the signed DLL files back from Honeywell, you can deploy them.
3.3 Deploying a Resource File (DLL) This section explains how to deploy a resource file (DLL) on the Metrics & Reporting
Core Web server, so that, Metrics & Reporting can dynamically read the new display
names from the resource file (DLL) and display them in the screens.
There are two types of deployment:
Normal deployment
GAC deployment
To the appropriate deployment method for each resource (DLL) file, refer to the chapter
“Localization projects in Metrics & Reporting” on page 20.
Normal deployment
Stop the web server as follows:
1. Choose Start > Administrative Tools > Internet Information Services (IIS)
Manager.
The Internet Information Services (IIS) Manager dialog box appears.
3. Deploying resource files
3.4. Finalizing resource file deployment
R200.1 DynAMo Metrics & Reporting Localization Guide 17 Apr 2017
2. Right-click the root node and choose Stop.
3. Copy the resource file (DLL) along with its parent directory (eg. de-DE for German,
zh-CN for Simplified Chinese) to the appropriate deployment folder(s).
You must deploy each resource file in its respective target folder. For information
about the target deployment folders for each resource file, refer to the chapter
"Localization projects in Metrics & Reporting” on page 20.
4. Start the web server again as follows:
a. Switch to the Internet Information Services (IIS) Manager dialog box.
b. Right-click the root node and choose Start.
Global Assembly Cache (GAC) deployment
Perform the following steps to install/register resource files in Global Assembly Cache
(GAC).
1. Open the Windows command prompt and navigate to the following folder within the
DynAMo Metrics & Reporting media:
Honeywell Intuition Localization
Tool\LT\Toolkit\Honeywell.MES.Sample.MESGACInstallUtility.exe
2. To install/register the dlls in GAC, open the command prompt window and execute
the following command:
Honeywell.MES.Sample.MESGACInstallUtility “<DLL_FILE_PATH>”
where <DLL_FILE_PATH> is the full path of the resource file that you want to
deploy.
Example:
C:\>Honeywell.MES.Sample.MESGACInstallUtility
“D:\Localized\Resource.dll”
3. Deploying resource files
3.4. Finalizing resource file deployment
18 DynAMo Metrics & Reporting Localization Guide R200.1 Apr 2017
3.4 Finalizing resource file deployment After deploying the localized resource files, you must finalize the deployment as follows:
1. On the Core Web server, browse to the following URL:
http://<WEB_SERVER>:<PORT>/MES/Default.aspx
where
<WEB_SERVER> is the host name of the Core Web server
<PORT> is the port number used the Metrics & Reporting web site
The Honeywell Applications page appears.
2. Under System, click System Configuration.
The Application page appears.
3. Set Honeywell.MES.Core.UI.Localization.IsLocalized to True.
4. Click Save.
3.5 Localizing system messages The Windows operating system displays certain (error/warning) messages when Metrics
& Reporting attempts to perform some actions. By default, these messages appear in
English only.
If you want to display these messages in a different language, you must change your
Windows locale to the required language on the CAM application server computer (using
the Control Panel > Clock, Language, and Region > Change display language app).
4. Configuring remote clients
4.1. Overview
R200.1 DynAMo Metrics & Reporting Localization Guide 19 Apr 2017
4. Configuring remote clients
4.1 Overview In order to enable your remote users to access the localized version of Metrics &
Reporting (via web browser), you must perform the following configuration setting on
their (remote) computers.
4.2 Configuring language settings in browser To configure the language settings in Internet Explorer:
1. In Interent Explorer, choose Tools > Internet Options.
The Internet Options dialog box appears.
2. In the General tab, click Languages.
The Language Preference dialog box appears.
3. Click Add, select the required language, and click OK.
The selected language is added to the Language Preference list.
4. Click the language and move it to the top of the list by clicking the Move Up button.
4.3 Limitations To support localization for East Asian languages, you must change the value of
Honeywell.MES.Core.UI.IME.Windowless key to false. You can access the key from
SystemCatalogs > AppConfigs in the Configure Entity screen.
While working with East Asian languages on the application, when you move your
mouse on the breadcrumb the screen may disappear or remain blank as this is a known
issue but it has no impact on the functionality.
5. Localization projects in Metrics & Reporting
5.1. Overview
20 DynAMo Metrics & Reporting Localization Guide R200.1 Apr 2017
5. Localization projects in Metrics & Reporting
5.1 Overview This chapter provides:
The list of localization projects (TTP) in Metrics & Reporting
The localization resource (DLL) files associated with these projects
The deployment mode of each resource file
The destination folder for deploying each resource file
5.2 List of localization projects
Overview
The localization project (TTP) files available in Metrics & Reporting are:
AMS.ttp
CollectorArchiver.ttp
DLM.ttp
DLMTimeControl.ttp
ShiftTime.ttp
MES Foundation.ttp
MESFoundation Services.ttp
CAM.ttp
DAS.ttp
Operations Shift.ttp
OPCHDAPlugin.ttp
Notifications.ttp
NotificationDisplays.ttp
EmailDispatcher.ttp
TimeManagement.ttp
5. Localization projects in Metrics & Reporting
5.2. List of localization projects
R200.1 DynAMo Metrics & Reporting Localization Guide 21 Apr 2017
AMS.ttp
Project file
\Localization\LocalizationProjects\AMS.ttp
Deployment details
Resource file (DLL) Deployment Mode
Destination folder
Honeywell.AMS.UX.
Resources.resources.dll
Normal <INSTALL_FOLDER>\Honeywell\AMS\
UX\WebUI\bin\
<INSTALL_FOLDER>\Honeywell\AMS\
UX\MetricsWebAPI\bin\
<INSTALL_FOLDER>\Honeywell\AMS\
DLM\UX\WebUI\bin\
CollectorArchiver.ttp
Project file
\Localization\LocalizationProjects\CollectorArchiver.ttp
Deployment details
Resource file (DLL) Deployment Mode
Destination folder
Honeywell.DynAMo.MnR.
UIResources.resources.dll
Normal <INSTALL_FOLDER>\Honeywell\DynAMo\
MnR\Collector\ConfigurationUI\
<INSTALL_FOLDER> \Honeywell\DynAMo\
MnR\Archiver\ConfigurationUI\
5. Localization projects in Metrics & Reporting
5.2. List of localization projects
22 DynAMo Metrics & Reporting Localization Guide R200.1 Apr 2017
DLM.ttp
Project file
\Localization\LocalizationProjects\DLM.ttp
Deployment details
Resource file (DLL) Deployment Mode
Destination folder
Honeywell.ReportFrameworkUI.
Resources.resources.dll
Normal <INSTALL_FOLDER>\Honeywell\AMS\
DLM\UX\WebUI\bin\
DLMTimeControl.ttp
Project file
\Localization\LocalizationProjects\DLMTimeControl.ttp
Deployment details
Resource file (DLL) Deployment Mode
Destination folder
Honeywell.DLM.Controls.
TimeControl.ResourceAssembly.
resources.dll
Normal <INSTALL_FOLDER>\Honeywell\AMS\
DLM\UX\WebUI\DLMTimeControl\bin\
ShiftTime.ttp
Project file
\Localization\LocalizationProjects\ShiftTime.ttp
Deployment details
Resource file (DLL) Deployment Mode
Destination folder
Honeywell.AMS.Service.
ShiftTime.Resource.resources.dll
Normal <INSTALL_FOLDER>\Honeywell\AMS\
Service\ShiftTimeService\1.0\bin\
5. Localization projects in Metrics & Reporting
5.2. List of localization projects
R200.1 DynAMo Metrics & Reporting Localization Guide 23 Apr 2017
MES Foundation.ttp
Project file
\Components\CoreSystem\CoreUI\Localization\MES Foundation.ttp
ATTENTION: Some of the resource strings in this project are stored in the database.
Before attempting to localize the resource strings, you must configure connectivity with
the database server and fetch the resource strings from the database as explained in the
section “Fetching text strings from database” on page 15.
Deployment details
Resource file (DLL) Deployment Mode
Destination folder
Honeywell.MES.Core.UX.
CE.Shell.ResourceAssembly.
resources.dll
Normal <INSTALL_FOLDER>\Honeywell\MES\
Core\wwwMEScore\ClientBin5\
Honeywell.MES.Core.UX.
ConfigureModelModule.
ResourceAssembly.resources.dll
Normal <INSTALL_FOLDER>\Honeywell\MES\
Core\wwwMEScore\ClientBin5\
Honeywell.MES.Core.UX.
ConfigureSecurityModule.
ResourceAssembly.resources.dll
Normal <INSTALL_FOLDER>\Honeywell\MES\
Core\wwwMEScore\ClientBin5\
Honeywell.MES.Core.UX.
ConfigureSystemCatalogModule.
ResourceAssembly.resources.dll
Normal <INSTALL_FOLDER>\Honeywell\MES\
Core\wwwMEScore\ClientBin5\
Honeywell.MES.Core.UX.
InfrastructureModule.
ResourceAssembly.dll
Normal <INSTALL_FOLDER>\Honeywell\MES\
Core\wwwMEScore\ClientBin5\
Honeywell.MES.Core.UX.
NavigationModule.
ResourceAssembly.resources.dll
Normal <INSTALL_FOLDER>\Honeywell\MES\
Core\wwwMEScore\ClientBin5\
Honeywell.MES.Core.UX.
RootModule.ResourceAssembly.
resources.dll
Normal <INSTALL_FOLDER>\Honeywell\MES\
Core\wwwMEScore\ClientBin5\
5. Localization projects in Metrics & Reporting
5.2. List of localization projects
24 DynAMo Metrics & Reporting Localization Guide R200.1 Apr 2017
Resource file (DLL) Deployment Mode
Destination folder
Honeywell.MES.Core.UX.
Shell.ResourceAssembly.
resources.dll
Normal <INSTALL_FOLDER>\Honeywell\MES\
Core\wwwMEScore\ClientBin5\
Honeywell.MES.Core.UX.
FlowSheetRuntime.
ResourceAssembly.dll
Normal <INSTALL_FOLDER>\Honeywell\MES\
Core\wwwMEScore\ClientBin5\
Honeywell.MES.Core.UX.
Utilities.ResourceAssembly.dll
Normal <INSTALL_FOLDER>\Honeywell\MES\
Core\wwwMEScore\ClientBin5\
Honeywell.MES.Diagnostics.
UX.LogViewer.
ResourceAssembly.dll
Normal <INSTALL_FOLDER>\Honeywell\MES\
Core\wwwMEScore\ClientBin5\
Honeywell.MES.Core.
DataModel.SystemCatalogs.
ResourceAssembly.dll
GAC N/A
Honeywell.MES.Core.Service.
DiagnosticsService.Resource.dll
Normal <INSTALL_FOLDER>\Honeywell\MES\
Core\Service\DiagnosticsService\1.0\bin\
Honeywell.MES.Core.UX.
Core.Web.ResourceAssembly.dll
Normal <INSTALL_FOLDER>\Honeywell\MES\
WWWMESCommon\bin\
Honeywell.MES.Core.
Service.TimeManagement.
Resource.dll
GAC N/A
ATTENTION:
When you build the resource files for this project, the following SQL script files are
generated along with the dll files:
NavigationNodes.sql
NavigationNodesDescripton.sql
Run these SQL script files on the database server.
5. Localization projects in Metrics & Reporting
5.2. List of localization projects
R200.1 DynAMo Metrics & Reporting Localization Guide 25 Apr 2017
MESFoundation Services.ttp
Project file
\Components\CoreSystem\CoreEnv\Localization\MESFoundation Services.ttp
Deployment details
Resource file (DLL) Deployment Mode
Destination folder
Honeywell.MES.Core.
Service.ExceptionHandling.
Resources.resources.dll
GAC N/A
Honeywell.MES.Core.
Service.LicenseRuntime.
Resource.resources.dll
Normal <INSTALL_FOLDER>\Honeywell\MES\
Core\Service\LicenseManager\1.0\bin\
Honeywell.MES.Core.
Service.Navigation.
Resource.resources.dll
Normal <INSTALL_FOLDER>\Honeywell\MES\
Core\Service\Navigation\1.0\bin\
Honeywell.MES.Core.
Service.Security.Resources.
resources.dll
GAC N/A
Honeywell.MES.Core.
Service.Resources.
resources.dll
GAC N/A
Honeywell.Intuition.
DataAccess.OData.Router.
ResourceAssembly.resources.dll
GAC N/A
5. Localization projects in Metrics & Reporting
5.2. List of localization projects
26 DynAMo Metrics & Reporting Localization Guide R200.1 Apr 2017
CAM.ttp
Project file
\Components\CAM\CAM_Localization\CAM.ttp
Deployment details
Resource file (DLL) Deployment Mode
Destination folder
CAM.UI.dll Normal <INSTALL_PATH>\Honeywell\MES\
Core\WWWMESCore\WebUX\CAM\bin\
CAM.DAL.dll Normal <INSTALL_PATH>\Honeywell\MES\
Core\Service\CommonAssetService\1.0\bin\
DAS.ttp
Project file
\Components\DAS\Localization\Intuition DAS.ttp
Deployment details
Resource file (DLL) Deployment Mode
Destination folder
Honeywell.MES.Core.UX.
PluginConfigurationModule.
ResourceAssembly.dll
Normal <INSTALL_PATH>\Honeywell\MES\
Core\Service\CommonAssetService\1.0\bin\
Honeywell.IDA.
CacheManagerPlugins.
InMemory.Resources.dll
Normal <INSTALL_PATH>\Honeywell\MES\
DataAccessService\220\1.0\bin\
Honeywell.IDA.
ConfigurationManagerPlugins.
ConfigurationManager.
Resources.dll
Normal <INSTALL_PATH>\Honeywell\MES\
DataAccessService\220\1.0\bin\
Honeywell.IDA.
DataAccessPlugins.
IntuitionDataSource.
Resources.dll
Normal <INSTALL_PATH>\Honeywell\MES\
DataAccessService\220\1.0\bin\
5. Localization projects in Metrics & Reporting
5.2. List of localization projects
R200.1 DynAMo Metrics & Reporting Localization Guide 27 Apr 2017
Resource file (DLL) Deployment Mode
Destination folder
Honeywell.IDA.
DataAccessPlugins.
OData.Resources.dll
Normal <INSTALL_PATH>\Honeywell\MES\
DataAccessService\220\1.0\bin\
Honeywell.IDA.
DataAccessPlugins.
WCFTimeSeries.Resources.dll
Normal <INSTALL_PATH>\Honeywell\MES\
DataAccessService\220\1.0\bin\
Honeywell.IDA.DiagnosticPlugin.
PerformanceCounters.
Resources.dll
Normal <INSTALL_PATH>\Honeywell\MES\
DataAccessService\220\1.0\bin\
Honeywell.IDA.Interfaces.
Resources.dll
Normal <INSTALL_PATH>\Honeywell\MES\
DataAccessService\220\1.0\bin\
Honeywell.IDA.
SecurityManagerPlugins.
DefaultSecurityManager.
Resources.dll
Normal <INSTALL_PATH>\Honeywell\MES\
DataAccessService\220\1.0\bin\
Honeywell.IDA.SubSystems.
TimeSeries.ITimeSeriesProvider.
Resources.dll
Normal <INSTALL_PATH>\Honeywell\MES\
DataAccessService\220\1.0\bin\
Honeywell.IDA.
DataSourcePlugins.DAS.
Resources.dll
Normal <INSTALL_PATH>\Honeywell\MES\
DataAccessService\220\1.0\bin\
Honeywell.IDA.
DataSourcePlugins.
Date.Resources.dll
Normal <INSTALL_PATH>\Honeywell\MES\
DataAccessService\220\1.0\bin\
Honeywell.IDA.
Configuration.Service.
Resources.dll
Normal <INSTALL_PATH>\Honeywell\MES\
DataAccessService\220\1.0\bin\
Honeywell.IDA.
DataAccessService.
Resources.dll
Normal <INSTALL_PATH>\Honeywell\MES\
DataAccessService\220\1.0\bin\
5. Localization projects in Metrics & Reporting
5.2. List of localization projects
28 DynAMo Metrics & Reporting Localization Guide R200.1 Apr 2017
Resource file (DLL) Deployment Mode
Destination folder
Honeywell.Intuition.DataAccess.
DataItemBrowserService.
Resources.dll
Normal <INSTALL_PATH>\Honeywell\MES\
Core\DataAccess\DataItemBrowser\1.0\bin\
Honeywell.IDA.ServiceGenerator.
ResourceAssembly.dll
Normal <INSTALL_PATH>\Honeywell\MES\Tools\
Operations Shift.ttp
Project file
\Components\Shift\Localization\Operations Shift.ttp
Deployment details
Resource file (DLL) Deployment procedure
Honeywell.MES.Service.
Shift.ShiftService.Resource.dll
1. From the installation media, copy the
\Components\Shift\Localization folder to a local drive.
2. Copy the signed DLL files (from Honeywell) to the Source
sub-folder, replacing the existing files.
3. In the Windows Start menu, right-click Windows PowerShell
and choose Run as administrator.
The Windows PowerShell command prompt window appears.
4. At the command prompt, navigate to the local copy of the
\Components\Shift\Localization folder.
5. Run the following command(s):
InstallLogbookShiftResources_Web.bat (Run this command on the web server. Applicable for split
server setup only.)
InstallLogbookShiftResource_All.bat
(Applicable for single server setup only.)
6. Provide appropriate inputs when prompted.
The resource files are deployed in their respective target
locations, and a success message is displayed.
Honeywell.MES.Shift.
WebUI.ResourceAssembly.dll
5. Localization projects in Metrics & Reporting
5.2. List of localization projects
R200.1 DynAMo Metrics & Reporting Localization Guide 29 Apr 2017
OPCHDAPlugin.ttp
Project file
\Components\OPC HDA DataSource Plugin\Localization\OPCHDAPlugin.ttp
Deployment details
Resource file (DLL) Deployment
Mode
Destination folder
Honeywell.IDA.
DataSourcePlugins.
OPCHDA.Resources.dll
Normal <INSTALL_FOLDER>\Honeywell\MES\
DataAccessService\220\1.0\bin\
Honeywell.MES.Core.
Service.OpcHda.Helper.
Resources.dll
Honeywell.MES.Core.Service.
OpcHda.Resource.dll
Notifications.ttp
Project file
\Components\Notification\Localization\Notification.ttp
Deployment details
Resource file (DLL) Deployment Mode
Destination folder
Honeywell.MES.Core.Service.
NotificationService.Resource.dll
Normal <INSTALL_PATH>\Honeywell\MES\Core\
Service\NotificationService\1.0\bin\
Honeywell.MES.Core.
DataModel.EventModel.
Resource.dll
Normal <INSTALL_PATH>\Honeywell\MES\Core\
DataModel\EventModel\1.0\bin\
Honeywell.MES.Service.
Diagnostics.Core.Resource.dll
Normal <INSTALL_PATH>\Honeywell\MES\Core\
Service\NotificationDiagnostics\1.0\bin\
Honeywell.MES.Service.Core.
NotificationLogSrv.Resource.dll
Normal <INSTALL_PATH>\Honeywell\MES\Core\
Service\NotificationLogService\1.0\bin\
5. Localization projects in Metrics & Reporting
5.2. List of localization projects
30 DynAMo Metrics & Reporting Localization Guide R200.1 Apr 2017
Resource file (DLL) Deployment Mode
Destination folder
Honeywell.MES.Core.Service.
NotificationType.
ServiceExtensions.Resource.dll
Normal <INSTALL_PATH>\Honeywell\MES\Core\
Service\NotificationType\bin\
Honeywell.MES.Core.Service.
NotificationService.Resource.
resources.dll
Normal <INSTALL_PATH>\Honeywell\MES\Core\
Service\NotificationService\
Honeywell.MES.Core.DataModel.
EventModel.Resource.
resources.dll
Normal <INSTALL_PATH>\Honeywell\MES\
Core\DataModel\EventModel\1.0\bin\
Honeywell.MES.Service.
Diagnostics.Core.Resource.
resources.dll
Normal <INSTALL_PATH>\Honeywell\MES\
Core\Service\NotificationDiagnostics\1.0\
bin\
Honeywell.MES.Service.Core.
NotificationLogSrv.Resource.
resources.dll
Normal <INSTALL_PATH>\Honeywell\MES\Core\
Service\NotificationLogService\1.0\bin\
Honeywell.MES.Core.Service.
NotificationType.
ServiceExtensions.Resource.
resources.dll
Normal <INSTALL_PATH>\Honeywell\MES\
Core\Service\NotificationType\bin\
NotificationDisplays.ttp
Project file
\Components\Notification\Localization\NotificationDisplays.ttp
Deployment details
Resource file (DLL) Deployment Mode
Destination folder
Honeywell.MES.NotificationUX.
UX.NotificationDisplay.
ResourceAssembly.dll
Normal <INSTALL_PATH>\Honeywell\MES\
Core\WWWMESCore\ClientBin\
Honeywell.MES.NotificationUX.
UX.NotificationDisplay.
ResourceAssembly.dll
Normal <INSTALL_PATH>\Honeywell\MES\
Core\WWWMESCore\ClientBin\
5. Localization projects in Metrics & Reporting
5.2. List of localization projects
R200.1 DynAMo Metrics & Reporting Localization Guide 31 Apr 2017
EmailDispatcher.ttp
Project file
\Components\Email Notification\LocalizationProject\EmailDispatcher.ttp
Deployment details
Resource file (DLL) Deployment Mode
Destination folder
Honeywell.MES.Core.Service.
EmailNotification.Resource.dll
Normal <INSTALL_PATH>\Honeywell\MES\
Core\Service\EmailNotification\1.0\bin\
Honeywell.MES.Core.Service.
EmailTransformer.Resource.dll
Normal <INSTALL_PATH>\Honeywell\MES\
Core\Service\EmailTransformer\1.0\bin\
Honeywell.MES.Core.Service.
EmailNotification.Resource.
resources.dll
Normal <INSTALL_PATH>\Honeywell\MES\
Core\Service\EmailNotification\1.0\bin\
Honeywell.MES.Core.Service.
EmailTransformer.Resource.
resources.dll
Normal <INSTALL_PATH>\Honeywell\MES\
Core\Service\EmailTransformer\1.0\bin\
TimeManagement.ttp
Project file
\Components\TimeManagement\Localization\Timemanagement.ttp
Deployment details
Resource file (DLL) Deployment Mode
Destination folder
Timemanagement.
CoreTimeService.dll
GAC N/A
Timemanagement.
MasterTimeService.dll
GAC N/A
Timemanagement.
Time Management.dll
GAC N/A
Honeywell Process Solutions 1860 W. Rose Garden Lane Phoenix, AZ 85027 USA
top related