dsl-2540t pppoa configuration. client configuration set your system to get ip from dsl-2540t...
Post on 17-Jan-2016
216 Views
Preview:
TRANSCRIPT
DSL-2540T PPPoA Configuration DSL-2540T PPPoA Configuration
Client Configuration
Set Your System to Get IP From DSL-2540T built-in DHCP Server
Click “OK” to Save
Select to Obtain IP automatically from DSL-2540T
DSL-2540T Log-in PageOpen Web-Browser & key-in http://192.168.1.1 to access Web-Configuration
User Name: admin
Password: admin
Setup Page
To Open Setup Screen CLICK “WAN”
Home WAN
Enter “0”
Enter “50”
ISP User Name & Password
Select PPPoA LLC
To Modify CLICK “Apply”
Setup Page
SAVE Changes
To Save Changes CLICK “Save and Reboot”
Status Device Info
Check the Status
2.CLICK “Connect”
1.Check “Not Connected”
Status Log Last Page
Connection Status
CLICK “Last Page”
Status Device Info
Connection Status
Check “Connected”
Thank You!!
Prepared by:Jaime D. Lano JrRMA Eng’r.D-Link Middle East
top related