dli korea (year 2009)
Post on 03-Feb-2016
45 Views
Preview:
DESCRIPTION
TRANSCRIPT
We manufacture new value and dream
DLI KOREA(YEAR 2009)
DLI KOREA
ENGLISHENGLISHDLI-PL-0907140334-JDDLI-PL-0907140334-JD
Company profile History Organization Visions Certification Main products Primary Process Main equipments Laboratory equipments Statistical quality management
Contents
DLI KOREA
We manufacture new value and dream
Company Profile
DLI Korea is a professional rubber product OEM company that manufactures various rubber products for Autoparts. Major automobile companies such as Hyundai, Kia, GM, Toyota, Volkswagen, and many others are using our products, and our technology as a professional OEM company is recognized in the global market.
DLI Korea will become your best OEM partner in becoming a globally competitive company. Thank you.
DLI KOREA
Main Products : Rubber Products
O-ring, Gasket, Grommet, Bushing,
Oil seal, Vent tube, Head Lamp strip,
Dust cover, Mount, Bellows…
Main Products : Rubber Products
O-ring, Gasket, Grommet, Bushing,
Oil seal, Vent tube, Head Lamp strip,
Dust cover, Mount, Bellows…
C E O : Yun, Ji Han
Establishment : 1978. 08. 15
Address : Wallamdong 1068 Dalsegu,
Daegu, Korea
TEL:053-582-6444 FAX:053-585-5088
C E O : Yun, Ji Han
Establishment : 1978. 08. 15
Address : Wallamdong 1068 Dalsegu,
Daegu, Korea
TEL:053-582-6444 FAX:053-585-5088
Gross sales : $5,300,000 (2008yr)
Employee status : 37 peoples
Scale of factory : 3305.7 ㎡
Gross sales : $5,300,000 (2008yr)
Employee status : 37 peoples
Scale of factory : 3305.7 ㎡
Main Clients : SL Corporation,
KC, KCW,
Korea Delphai (Delphai)
TSK KOREA (Japan Hi-lex Group)
Main Clients : SL Corporation,
KC, KCW,
Korea Delphai (Delphai)
TSK KOREA (Japan Hi-lex Group)
We manufacture new value and dream
History
DLI KOREA
1978. 08 Establishment of DAE LIM Industrial 1978. 08 Establishment of DAE LIM Industrial
1993. 04 Utility model registered for automobile headlight grommet 1993. 04 Utility model registered for automobile headlight grommet
2000. 05 Obtained QS 9000 / ISO 9002 certification 2000. 05 Obtained QS 9000 / ISO 9002 certification
2001. 01 Obtained Hyundai KIA SQ Mark certification 2001. 01 Obtained Hyundai KIA SQ Mark certification
2002. 02 Obtained clean company environment certification 2002. 02 Obtained clean company environment certification
2004. 07 Utility model registered for heteromorphic device for rubber mold products2004. 07 Utility model registered for heteromorphic device for rubber mold products
2004. 11 Obtained ISO/TS-16949 certification 2004. 11 Obtained ISO/TS-16949 certification
2005. 06 Utility model registered for HP strip core injection mold device 2005. 06 Utility model registered for HP strip core injection mold device
2006. 06 Obtained INNO-BIZ certification 2006. 06 Obtained INNO-BIZ certification
2006. 10 Selected as a prospective middle-sized company by Daegu Bank 2006. 10 Selected as a prospective middle-sized company by Daegu Bank
2007. 10 Obtained ISO 14001:2004 environmental management certification 2007. 10 Obtained ISO 14001:2004 environmental management certification
2007. 10 Obtained Ssangyong Motors quality certification 2007. 10 Obtained Ssangyong Motors quality certification
2008. 01 Automotive rubber products official model factory from Hyundai motor2008. 01 Automotive rubber products official model factory from Hyundai motor
2008. 08 Obtained Ssangyong Motors quality certification 2008. 08 Obtained Ssangyong Motors quality certification
2008. 09 Joined Moscow International Automobile Exhibition 2008. 09 Joined Moscow International Automobile Exhibition
We manufacture new value and dream
Organization
DLI KOREA
We manufacture new value and dream
Visions
DLI KOREA
Improvement in quality
Sales goal : $7,000,000
maximization of business competitiveness.
Sales goal : $9,000,000
Acquisition for advanced
Technologies.
Sales goal : $12,000,000
Facility investment and
Automation.
Sales goal : $15,0000,000
Facility
Automation Creative
technologiesCut the cost of
manufactureInnovations in
process system
2009yr2010yr
2011yr
2012yr
We manufacture new value and dream
Certification
DLI KOREA
SQ MARK for Hyundai Motor Quality system
NO. HKQ-RU-035
Organ Hyundai Motors
Certified by SL inc.
The term of validity Until rescission
Quality Certification for Ssangyoung Motors
NO. S0374RU025
Organ Ssangyong Motors
Certified by SL inc.
The term of validity Until rescission
ISO/TS 16949
NO. 0060342
Organ AFAQ
Certified by AFNOR
The term of validity
2008.09~2010.11
ISO 14001
NO. AR01-E0720
Organ IAF
Certified by ACE
The term of validity
2008.09~2010.10
인증서를 그림파일로 삽입해 주세요
인증서를 그림파일로 삽입해 주세요
We manufacture new value and dream
DLI KOREA
INNOVATION BUSINESS
NO. 6031-0949
Organ SMBA
Certified by SMBA
The term of validity
2006.06~2009.06
ISO 9001
NO. 23404a
Organ AFAQ
Certified by AFNOR
The term of validity
2008.09~2010.11
CLEAN FACTORY Certifiction
NO. 2893
Organ Ministry of Labor
Certified by KOSH
The term of validity Until rescission
Promising Small & Medium Enterprise
NO. 200630
Organ Daegu Bank
Certified by Daegu Bank
The term of validity Until rescission
We manufacture new value and dream
Registeration of utility model
DLI KOREA
Automobile headlight grommet
NO. 097834
Organ IPO
Certified by IPO
The term of validity Until rescission
HP strip core injection mold device
NO. 0388271
Organ IPO
Certified by IPO
The term of validity Until rescission
Heteromorphic device for rubber mold products
NO. 0357208
Organ IPO
Certified by IPO
The term of validity Until rescission
We manufacture new value and dream
MAIN PRODUCTS1. LAMP components
DLI KOREA
We manufacture new value and dream
DLI KOREA2. Electrical wiring parts
We manufacture new value and dream
3. Gear Cable components
DLI KOREA
We manufacture new value and dream
4. Packing / Gaskets
DLI KOREA
We manufacture new value and dream
Primary Process
DLI KOREA
1 . Materials1 . Materials
9 . Tearing products9 . Tearing products
3 . Rolling FMB3 . Rolling FMB 4 . Rheometer4 . Rheometer 5 . Cutting 5 . Cutting 6 . Ripening6 . Ripening
7 . Properties test7 . Properties test 8 . Manufacture 8 . Manufacture
2 . Chemical metering2 . Chemical metering
10 . Inspection10 . Inspection 11 . Packing11 . Packing 12 . Shipment12 . Shipment
Purchasing materials and Warehousing it.Purchasing materials and Warehousing it.
Chemical metering by the computer measuring systemChemical metering by the computer measuring system
Rolling and mixing the FMB rubber.Rolling and mixing the FMB rubber.
Test the Rheometer curve of FMB Rubber.Test the Rheometer curve of FMB Rubber.
Cutting the FMB Rubber sheets.Cutting the FMB Rubber sheets.
Ripening the cut rubber for 24 hours.Ripening the cut rubber for 24 hours.
Final properties test of ripe rubber.Final properties test of ripe rubber.
Manufacturing productsManufacturing products Tearing the products in realshapeTearing the products in realshape
Inspection and checking ofthe quality point.Inspection and checking ofthe quality point.
Packing the products withcustom packing manual.Packing the products withcustom packing manual.
Warehousing the ProductsAnd ready for shipment.Warehousing the ProductsAnd ready for shipment.
We manufacture new value and dream
DLI KOREA
Description
500ton Vacuum Hydraulic Press
300ton Vacuum Hydraulic Press
250ton Vacuum Hydraulic Press
250ton Vacuum Hydraulic Press
200ton Vacuum Hydraulic Press
350ton Vacuum Injection
18 Inch Open Roll
Rubber sheet Cutter
Mold Washer
Heating Oven
Description
500ton Vacuum Hydraulic Press
300ton Vacuum Hydraulic Press
250ton Vacuum Hydraulic Press
250ton Vacuum Hydraulic Press
200ton Vacuum Hydraulic Press
350ton Vacuum Injection
18 Inch Open Roll
Rubber sheet Cutter
Mold Washer
Heating Oven
Quality
2
5
6
5
15
5
1
5
1
3
Quality
2
5
6
5
15
5
1
5
1
3
Spec
1000 x 1200mm
700 x 750mm
600 x 650mm
500 x 560
400 x 460
670 x 680mm
Spec
1000 x 1200mm
700 x 750mm
600 x 650mm
500 x 560
400 x 460
670 x 680mm
Main equipments
We manufacture new value and dream
DLI KOREA Vacuum Hydraulic Injection Type Machine Vacuum Hydraulic Injection Type Machine- It is composed of direct-pressure, high-strength operation devices
- The locations of the heat plate and fixed plate are optimally designed based on structural analysis- User’s safety is the first priority- It is designed for optimal use of working space- Measurement and injection molding process is done with fine control- It is composed of an optimal system to minimize error rates- It is a user-focused system that incorporates various user needs- Noise and shock is minimized during the process to improve its efficiency- Double extruding cylinder is applied to minimize the device height, with the maximum pressure for fine precision- Screw reflux is prevented during the extruding process- Leak prevention is checked at the nozzle head to inhibit loss of ingredients during the injection molding process- Chamber box is covered before the contact of upper and lower metallic pattern to create an airtight environment for minimization of the error rate
- It is composed of direct-pressure, high-strength operation devices- The locations of the heat plate and fixed plate are optimally designed based on structural analysis- User’s safety is the first priority- It is designed for optimal use of working space- Measurement and injection molding process is done with fine control- It is composed of an optimal system to minimize error rates- It is a user-focused system that incorporates various user needs- Noise and shock is minimized during the process to improve its efficiency- Double extruding cylinder is applied to minimize the device height, with the maximum pressure for fine precision- Screw reflux is prevented during the extruding process- Leak prevention is checked at the nozzle head to inhibit loss of ingredients during the injection molding process- Chamber box is covered before the contact of upper and lower metallic pattern to create an airtight environment for minimization of the error rate
ERP SystemERP System- From production to selling, it's All control by ERP System - From production to selling, it's All control by ERP System
Vacuum Hydraulic Press Type
Machine
Vacuum Hydraulic Press Type
Machine
Integrated control
system
Integrated control
system
We manufacture new value and dream
DLI KOREA
Projector Projector
Ozone tester Ozone tester Low-temperature shock tester
Low-temperature shock tester
Non-contact analyzerNon-contact analyzer
Oil Resistance tester Oil Resistance tester
Wearing testerWearing tester
Specific-gravity measuring deviceSpecific-gravity measuring device
Mooney Viscosity Mooney Viscosity
HAZE testerHAZE tester
Compression setCompression set
RheometerRheometer
Sample cutterSample cutter
Aging testerAging tester
MicroscopeMicroscope
Tensile tester Tensile tester
Device name
Aging tester
Rheometer curve
Tensile tester
Compression set
Ozone tester
Low-temperature tester
High-power microscope
Hardness tester A
Hardness tester C
Specific-gravity measuring device
Mooney viscosity
Oil Resistance tester
HAZE tester
Sample cutter
Measuring system
Projector
Videometer
Wearing tester
2L Kneader
8 inch roller
Device name
Aging tester
Rheometer curve
Tensile tester
Compression set
Ozone tester
Low-temperature tester
High-power microscope
Hardness tester A
Hardness tester C
Specific-gravity measuring device
Mooney viscosity
Oil Resistance tester
HAZE tester
Sample cutter
Measuring system
Projector
Videometer
Wearing tester
2L Kneader
8 inch roller
Specification
0~+400℃
X 300℃
120kg
600kg
200ppm
-90 ℃
60/40 ratio
Show A type
Show C type
1/100
Non-contact analyzer
Specification
0~+400℃
X 300℃
120kg
600kg
200ppm
-90 ℃
60/40 ratio
Show A type
Show C type
1/100
Non-contact analyzer
Quantity
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Quantity
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Use
Test product’s aging level
Test rubber’s properties
Test tensile strength
Test rubber’s deformity rate
Test product’s anti-ozone strength
Test product’s anti-low temp. strength
Test product DIMS and external texture
Test product's hardness
Test sponge hardness
Measure product’s specific gravity
Measure viscosity
Test Oil Resistance
Test HAZE function
Cutting a piece of rubber for test
Measure mixing ingredients
Fine measurement of product DIMS
Measure Product Dims and texture
Test the durability
Knead Test material (CMB)
knead Test material (FMB)
Use
Test product’s aging level
Test rubber’s properties
Test tensile strength
Test rubber’s deformity rate
Test product’s anti-ozone strength
Test product’s anti-low temp. strength
Test product DIMS and external texture
Test product's hardness
Test sponge hardness
Measure product’s specific gravity
Measure viscosity
Test Oil Resistance
Test HAZE function
Cutting a piece of rubber for test
Measure mixing ingredients
Fine measurement of product DIMS
Measure Product Dims and texture
Test the durability
Knead Test material (CMB)
knead Test material (FMB)
Lab equipments
We manufacture new value and dream
Statistical quality management
DLI KOREA
Monthly inspection report
Daily Inspection report
We manufacture new value and dream
KAIZEN (Quality improvement system)
DLI KOREA
Quality conference record Quality improvement report
We manufacture new value and dream
www.dlikorea.comVisit us
DLI KOREA
We manufacture new value and dream
Thank youThank you
We consider the relation between your company and our company as a treasure, and all our staffs are to do the best standing on honesty and trust.
DLI KOREA
We manufacture new value and dream
top related