discribtion of safety and health work competency : applying of safety and health work

DISCRIBTION OFSAFETY AND HEALTH WORK

Competency :

APPLYING OF SAFETY AND HEALTH WORK

Teknologi dan Rekayasa

STUDENTS CAN DESCRIBING OF WORK SAFETY AND HEALTH

KNOW CAN TYPE WORK SAFETY AND HEALTH

OBJECTIVE

THE LAW AND REGULATIONS ON SAFETY AND HEALTH WORK

1. About Term 2. Scope 3. Terms - Safety Requirements 4. Guidance 5. Development Committee Occupational

Safety and Health 6. Accidents and How to Report 7. Liabilities and Labor Rights 8. Obligations when entering the

workplace 9. Liability Management

Teknologi dan Rekayasa

1. No. Act. 1 of 1970 on Occupational Safety

1. Definition 2. Accident Reporting Procedures 3. Inspection Accident 4. Sanction 5. Supervision 6. Closing Provisions

Teknologi dan Rekayasa

2. Regulation of the Minister of Manpower No.. 03/MEN/98 on Procedures Accident Reporting and Examination

1. General Provisions 2. Goals and Targets K3 Management System

K3 3. Management System Implementation 4. K3 Management System Audit 5. Authority of Director 6. Audit Implementation Mechanism 7. Certificate K3 8. Guidance and Supervision 9. Financing

Teknologi dan Rekayasa

3. Regulation of the Minister of Manpower No.. PER.05/MEN/1996 of Safety Management System and Occupational Health

BASIC CONCEPTS OF K3

Teknologi dan Rekayasa

WO BIGGEST PROBLEMS CAUSE ACCIDENTS WORK

The objective of education occupational safety and health is to prevent accidents

Unsafe behavior

Environmental conditions are not safe

Teknologi dan Rekayasa

The purpose of safety and health Protect your health manpower, improve working efficiency, prevent the occurrence of occupational accidents and diseases

Should set placement assistant

VARIOUS PURPOSES K3

Teknologi dan Rekayasa

1. Anticipating the existence of the factors causing hazards and take reasonable precautions before.

2. Understanding the types of hazards in the workplace

3. Evaluating the level of danger in the workplace

4. Controlling the occurrence of danger or complications.

HOW TO CONTROL HEALTH THREAT AND HAZARD WORK

Teknologi dan Rekayasa

Control techniques: changing work procedures, closing isolating hazardous materials, using automation work, using wet workings and ventilation air changes

Administrative control: reducing the exposure time, arrange health and safety rules, wearing protective equipment, installing warning signs, make a list of materials data is safe, do penangganan system emergency training

Monitoring health: health checks

LIABILITY COORDINATING FOR K3

Teknologi dan Rekayasa

• Improving health manpower

• Realize and explain the dangers

• Establishing P2K3

• Health report

• Provide protective equipment

• Fire-fighting units formed

BASIC SAFETY

Teknologi dan Rekayasa

A condition or action that can cause human losses, property, and environment

A measure of the state likelihood and severity of a loss due to

Unwanted incident

THE END

Teknologi dan Rekayasa

By. Setyo Harmadi,ST SMK Muhammadiyah 3 Yogyakarta