din certifications

DIN Certifications

Certification Certificate Inspecting and issuing body

Technical requirement of

supply Basis of certification

EN 50049-2.1 certificate of compliance

manufacturer or processor

applicable requirement of

purchaser

general description of method of manufacture and

Q.C.

EN 50049-2.2 work's certificate regular Q.C.

EN 50049-2.3 work's test certificate

test results obtained from total consignment for

chosen samples

EN 50049-3.1 A inspection

certificate (1) official inspection

authority

EN 50049-3.1 B inspection

certificate (2) work's inspection applicable

requirement of purchaser EN 50049-3.1 C

inspection certificate (3)

inspecting body appointed by

purchaser

EN 50049-3.2 A inspection

minute A (3)

same as inspection

certificate A (3) same as inspection certificate A

EN 50049-3.2 C inspection

minute C (3) same as inspection

certificate C (3) same as inspection certificate C

(1) - Inspection carried out by work's inspector, who should be divorced from any production involvement. (2) - Requirements of an official inspection authority could be included. (3) - Signature of work's inspector should be added.

These information have to be intended as a general guide. Therefore their use is always at user's responsibility.