dichare o lannin condition or chippenham arden adopted ... · landscape architects prp to design...
Post on 09-Oct-2020
1 Views
Preview:
TRANSCRIPT
Enhanced Public Realm for South KilburnDischarge of Planning Condition for Chippenham Gardens Adopted Highway Land
PUBLIC EXHIBITION, 12 MARCH 2018 For more information please call the South Kilburn Regeneration Team - Tel: 0208 937 2149 or email: daniel.bailey@brent.gov.uk
Malvern Road
Stuart Road
Chippenham Gardens
Existing Site
1
4
3
2
PurposeThe Council are exhibiting the design proposal for the enhanced Adopted Highway Land located at Chippenham Gardens as part of discharging Planning Condition 11.
Where?The site sits to the southern end of the South Kilburn Regeneration Masterplan Area. The site is bounded by Malvern Road to the west, Stuart Road to the north and Chippenham Gardens to the south. The site currently accommodates: Adopted Highway Land which is a combination of hard and soft landscaping which is open to the public.
What?The redevelopment of the site is part of the wider South Kilburn Regeneration Programme. The regeneration of South Kilburn is a fifteen year programme, that is half way through, that aims to transform the area into a sustainable mixed neighbourhood and create a sense of place and belonging.
The redesign of the adopted highway land aligns with the Councils and the Communities aspirations for a high quality, enhanced and improved public realm and seeks to discharge planning conditions set out by Brent Planning Authority.
Who?The London Borough of Brent have appointed award winning Landscape Architects PRP to design and specify the proposal in line with the South Kilburn Supplementary Planning Document 2017 and Condition 11.
The Landscape Architects and Council Officers are here today to discuss the design objectives, the redesign proposal and timescales for implementation.
When?The redesign for the site will be submitted to the Brent Planning Authority for discharge of the pertinent planning condition in early Spring 2018.
*Please note, it is anticipated that the enhanced adopted highway land will be delivered by 2019/20; however this date may be subject to change.
The Council will continue to keep the community updated on the anticipated delivery of the site as the project progresses.
For further information please see:www.brent.gov.uk/southkilburn
Design Objectives• To create a high quality and accessible space which will be a
place of tranquillity and enjoyment;
• Enhance and improve the current site by increasing the soft landscaping and by retaining and trimming back the existing trees to provide greater daylight that penetrates the site;
• A low maintenance, vibrant and robust planting palette has been carefully designed to create seasonal interest and create a sense of character to the adopted highway land;
• Bird, solitary bees and butterfly houses have been introduced to the space to enhance biodiversity and create a natural habitat for the species;
• Existing site furniture will be removed and replaced with new high quality street furniture to compliment the overall quality of the site;
• Lighting columns will be introduced to improve visibility and natural surveillance of the area;
• High quality fencing will be provided around the boundary of the soft landscaped areas to provide security and a clear identity to the boundaries.
1 Underused space with inherent design problems 2 Lawn regularly covered in litter 3 Issues with fly-tipping around existing trees. Uneven ground level to existing paving.
Existing street furniture causing clutter at the site4 6 Temporary bins which have been located at the site have attracted more litter and fly tipping and discourage positive use of the space. These will be removed and relocated when the site comes forward for redevelopment.
5 Unauthorised parking on adopted highway land
5
6
Location Plan
KILB
URN
PARK
ROA
D
CARLTON VALE
MA
LVERN
RO
AD
MALVERN ROAD
SHIRLAND ROAD
SHIRLAND ROAD
CH
IPPENH
AM
RO
AD
SALTR
AM
CR
ESCEN
T
FERN
HEA
D R
OA
D
FERN
HEA
D R
OA
D
WALT
ERTO
N ROAD
ELGIN AVENUE
ELGIN AVENUE
Marian Community Centre
The Site
Enhanced Public Realm for South KilburnDischarge of Planning Condition for Chippenham Gardens Adopted Highway Land
PUBLIC EXHIBITION, 12 MARCH 2018 For more information please call the South Kilburn Regeneration Team - Tel: 0208 937 2149 or email: daniel.bailey@brent.gov.uk
Wood House Urban Park Furniture
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
all drawings are copyright of architecture, do not scale from drawings,the contractor is to verify all dimensions on site prior to any manufacture
client
project
title
scale/date
drwg no
LB Brent
GA Site Plan1:100 at A1, 03.07.1514287/GA01 T01
Wood House Urban Park
22b Regent Studios, 8 Andrews Rd, London E8 4QN, t.020 72546336erectarchitecture.
T01 03.07.15 For tender
0m 1m 5m 1:100
Giant Tree play structure
Bean pole play structure
Basket swing
Double swing
Jumping discs
Trampoline
Inclined balancing beam
Formal timber bench
Informal tree log bench
Formal concrete bench
Double sided concrete bench
Picnic table
Litter Bins
Recessed water hydrant
Meters & irrigation control
Notice board
Self-closing single gate
Self-closing double gate
Perimeter fencing
Stage
Table Tennis Table
Concrete Stools
Locations of nesting boxes to be confirmed on site
Legend
Existing concrete paving
Concrete paving to match existing
Exposed Thames dredged aggregate concrete floor
Patterned concrete, Type Timber planks
Patterned concrete, Type Dimensional stain cube
Patterned concrete, Type Santa Barbara tile
Lawn
Herbacious and shrub planting
Flexitop impact attenuating safety surface
Tigermulch impact attenuating safety surface
Albert Road
Denmark Road
Rup
ert R
oad
N
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
all drawings are copyright of architecture, do not scale from drawings,the contractor is to verify all dimensions on site prior to any manufacture
client
project
title
scale/date
drwg no
LB Brent
GA Site Plan1:100 at A1, 03.07.1514287/GA01 T01
Wood House Urban Park
22b Regent Studios, 8 Andrews Rd, London E8 4QN, t.020 72546336erectarchitecture.
T01 03.07.15 For tender
0m 1m 5m 1:100
Giant Tree play structure
Bean pole play structure
Basket swing
Double swing
Jumping discs
Trampoline
Inclined balancing beam
Formal timber bench
Informal tree log bench
Formal concrete bench
Double sided concrete bench
Picnic table
Litter Bins
Recessed water hydrant
Meters & irrigation control
Notice board
Self-closing single gate
Self-closing double gate
Perimeter fencing
Stage
Table Tennis Table
Concrete Stools
Locations of nesting boxes to be confirmed on site
Legend
Existing concrete paving
Concrete paving to match existing
Exposed Thames dredged aggregate concrete floor
Patterned concrete, Type Timber planks
Patterned concrete, Type Dimensional stain cube
Patterned concrete, Type Santa Barbara tile
Lawn
Herbacious and shrub planting
Flexitop impact attenuating safety surface
Tigermulch impact attenuating safety surface
Albert Road
Denmark Road
Rup
ert R
oad
N
Bench type 2 perspectivents18 Bench type 3 perspective
nts23
0 100 250mm 1000mm = 1m 1:20
all drawings are copyright of architecture, do not scale from drawings,the contractor is to verify all dimensions on site prior to any manufacture
client
project
title
scale/date
drwg no
LB Brent
Concrete furniture1:20 & 1:10 at A1, 03.07.1514287/DET12 T01
Wood House Urban Park
T01 03.07.15 For tender
22b Regent Studios, 8 Andrews Rd, London E8 4QN, t.020 72546336erectarchitecture.
General notes:
Bespoke picnic bench & table:Refer to NBS spec Q50-340Refer to Structural Engineer's sketches SK-C-02 &03 and spec
Bespoke concrete benches:Refer to NBS spec Q50-341Refer to Structural Engineer's sketches SK-C-01 &04 and spec
CONTRACTOR TO PROVIDE PRODUCTION DRAWINGSFOR CONTRACT ADMINISTRATOR'S & CLIENT'SCOMMENTS AND SIGN OFF
CONTRACTOR TO PROVIDE SAMPLES OF FINISH
Type 2
DET05
DET 05
DET 05
DET05
DET05
DET05Type 1a & 1b
Type 3
Type 3
Type 3
Plan1:10001
Bench type 1a, perspectivents03Bench type 1a & 1b, perspective
nts02
Bench type 1a elevation1:2004 1:2005 Bench type 1a section Bench type 1b elevation
1:2006 1:2007 Bench type 1b section
R 25R 25
25
4010
Bench type 1a & 1b elevation1:1008 1:1009 Bench type 1a section
Bench type 1a & 1b elevations1:2010
1990 10 1990 10 1990 10 1990 10 1990
6010
6010
6010
6010
6010
6025
25
R 25
R 25
R 25
Bench type 1a & 1b plan1:20 & 1:1011 Bench type 1a & 1b perspective
nts12
1:2013 Bench type 2 section
1:2015 Bench type 2 elevation1:2016 Bench type 2 elevation
1:2014 Bench type 2 section
1:2017 Bench type 2 plan
1:2019 Bench type 3 elevation
1:2021 Bench type 3 elevation
Bench type 3 plan1:2022
1:2020 Bench type 3 section
1 in 80 incline toseat. Water to drainthrough slot inbackrest.
1 in 80 incline toconcrete seat. Waterto drain towardsplanting bed.Timber to be horizontal.
1 in 100 min incline toconcrete seat. Waterto drain towardsplanting bed.Timber to be horizontal.
Bench type 2 perspectivents18 Bench type 3 perspective
nts23
0 100 250mm 1000mm = 1m 1:20
all drawings are copyright of architecture, do not scale from drawings,the contractor is to verify all dimensions on site prior to any manufacture
client
project
title
scale/date
drwg no
LB Brent
Concrete furniture1:20 & 1:10 at A1, 03.07.1514287/DET12 T01
Wood House Urban Park
T01 03.07.15 For tender
22b Regent Studios, 8 Andrews Rd, London E8 4QN, t.020 72546336erectarchitecture.
General notes:
Bespoke picnic bench & table:Refer to NBS spec Q50-340Refer to Structural Engineer's sketches SK-C-02 &03 and spec
Bespoke concrete benches:Refer to NBS spec Q50-341Refer to Structural Engineer's sketches SK-C-01 &04 and spec
CONTRACTOR TO PROVIDE PRODUCTION DRAWINGSFOR CONTRACT ADMINISTRATOR'S & CLIENT'SCOMMENTS AND SIGN OFF
CONTRACTOR TO PROVIDE SAMPLES OF FINISH
Type 2
DET05
DET 05
DET 05
DET05
DET05
DET05Type 1a & 1b
Type 3
Type 3
Type 3
Plan1:10001
Bench type 1a, perspectivents03Bench type 1a & 1b, perspective
nts02
Bench type 1a elevation1:2004 1:2005 Bench type 1a section Bench type 1b elevation
1:2006 1:2007 Bench type 1b section
R 25R 25
25
4010
Bench type 1a & 1b elevation1:1008 1:1009 Bench type 1a section
Bench type 1a & 1b elevations1:2010
1990 10 1990 10 1990 10 1990 10 1990
6010
6010
6010
6010
6010
6025
25
R 25
R 25
R 25
Bench type 1a & 1b plan1:20 & 1:1011 Bench type 1a & 1b perspective
nts12
1:2013 Bench type 2 section
1:2015 Bench type 2 elevation1:2016 Bench type 2 elevation
1:2014 Bench type 2 section
1:2017 Bench type 2 plan
1:2019 Bench type 3 elevation
1:2021 Bench type 3 elevation
Bench type 3 plan1:2022
1:2020 Bench type 3 section
1 in 80 incline toseat. Water to drainthrough slot inbackrest.
1 in 80 incline toconcrete seat. Waterto drain towardsplanting bed.Timber to be horizontal.
1 in 100 min incline toconcrete seat. Waterto drain towardsplanting bed.Timber to be horizontal.
Type 2
1990 10 1990 10 1990 10 1990 10 1990
0 100 250mm 1000mm = 1m 1:20
all drawings are copyright of erectarchitecture, do not scale from drawings,the contractor is to verify all dimensions on site prior to any manufacture
client
project
title
scale/date
drwg no
LB Brent
Concrete furniture1:20 & 1:10 at A1, 03.06.1514287/DET01 rev-DRAFT1
Wood House Urban Park
DRAFT 03.06.15 DT comments
22b Regent Studios, 8 Andrews Rd, London E8 4QN, t.020 72546336erectarchitecture.
DRAFT1 11.06.15 For information
Bench type 1a & 1b elevations1:2001
Bench type 1a & 1b plan1:20 & 1:1001
1:2001 Bench type 2 section
1:2001 Bench type 2 elevation
1:2001 Bench type 2 plan
1:2001 Bench type 3 elevation
1:2001 Bench type 3 elevation
Bench type 3 plan1:2001
6010
6010
6010
6010
6010
6025
25
R 25
R 25
R 25
Type 1a & 1b
Type 3
Type 3
Type 3
Plan1:10001
1:2001 Bench type 2 section
1:2001 Bench type 2 elevation
1:2001 Bench type 3 section
1:1001 Bench type 1a section
R 25R 25
25
4010
Bench type 1a & 1b elevation1:1001Bench type 1a elevation
1:2001 1:2001 Bench type 1a section Bench type 1b elevation1:2001 1:2001 Bench type 1b section
Slope 1:80
Bench type 1a & 1b perspectivents01
Bench type 1a, perspectivents01Bench type 1a & 1b, perspective
nts01
Bench type 2 perspectivents01 Bench type 3 perspective
nts01
General notes:
Timber battens are fixed to a frame of either flatstainless steel strips or rectangular sections.Rectangular sections are used where the framesspan between supports (type 2)The frames are screw fixed to the concretefurniture and can be easily removed shouldvandalism occur.
Timber battens: 40x60mm, thermo treated oak,sanded smooth, radius 3mm to all edges, nocoating, supplied by Bad Essener Saegewerk,http://www.bad-essener-saegewerk.de/
Screws: Stainless steel, size and type tbc by SE,screwed in from below
Flat bars: Stainless steel?? or galvanised,pre-drilled, 50mm wide? size?
Fixings between metal frame and concrete: Pin hexHafren shield anchor or similar, stainless steel,what size?
Concrete furniture:Type of concrete: ?Mould specification: ?
All edges and corners to have 25mm radiiTo prevent surface staining caused by rainwaterrun-off horizontal surface are sloping inwards anddrain through a hole.
Fixing: Cast in or free-standing
Surface to be hand finished to remove anyimperfections and acid washed.Coating: TBC but definitely anti-graffiti coating
Type 2
1990 10 1990 10 1990 10 1990 10 1990
0 100 250mm 1000mm = 1m 1:20
all drawings are copyright of erectarchitecture, do not scale from drawings,the contractor is to verify all dimensions on site prior to any manufacture
client
project
title
scale/date
drwg no
LB Brent
Concrete furniture1:20 & 1:10 at A1, 03.06.1514287/DET01 rev-DRAFT1
Wood House Urban Park
DRAFT 03.06.15 DT comments
22b Regent Studios, 8 Andrews Rd, London E8 4QN, t.020 72546336erectarchitecture.
DRAFT1 11.06.15 For information
Bench type 1a & 1b elevations1:2001
Bench type 1a & 1b plan1:20 & 1:1001
1:2001 Bench type 2 section
1:2001 Bench type 2 elevation
1:2001 Bench type 2 plan
1:2001 Bench type 3 elevation
1:2001 Bench type 3 elevation
Bench type 3 plan1:2001
6010
6010
6010
6010
6010
6025
25
R 25
R 25
R 25
Type 1a & 1b
Type 3
Type 3
Type 3
Plan1:10001
1:2001 Bench type 2 section
1:2001 Bench type 2 elevation
1:2001 Bench type 3 section
1:1001 Bench type 1a section
R 25R 25
25
4010
Bench type 1a & 1b elevation1:1001Bench type 1a elevation
1:2001 1:2001 Bench type 1a section Bench type 1b elevation1:2001 1:2001 Bench type 1b section
Slope 1:80
Bench type 1a & 1b perspectivents01
Bench type 1a, perspectivents01Bench type 1a & 1b, perspective
nts01
Bench type 2 perspectivents01 Bench type 3 perspective
nts01
General notes:
Timber battens are fixed to a frame of either flatstainless steel strips or rectangular sections.Rectangular sections are used where the framesspan between supports (type 2)The frames are screw fixed to the concretefurniture and can be easily removed shouldvandalism occur.
Timber battens: 40x60mm, thermo treated oak,sanded smooth, radius 3mm to all edges, nocoating, supplied by Bad Essener Saegewerk,http://www.bad-essener-saegewerk.de/
Screws: Stainless steel, size and type tbc by SE,screwed in from below
Flat bars: Stainless steel?? or galvanised,pre-drilled, 50mm wide? size?
Fixings between metal frame and concrete: Pin hexHafren shield anchor or similar, stainless steel,what size?
Concrete furniture:Type of concrete: ?Mould specification: ?
All edges and corners to have 25mm radiiTo prevent surface staining caused by rainwaterrun-off horizontal surface are sloping inwards anddrain through a hole.
Fixing: Cast in or free-standing
Surface to be hand finished to remove anyimperfections and acid washed.Coating: TBC but definitely anti-graffiti coating
Type 2
1990 10 1990 10 1990 10 1990 10 1990
0 100 250mm 1000mm = 1m 1:20
all drawings are copyright of erectarchitecture, do not scale from drawings,the contractor is to verify all dimensions on site prior to any manufacture
client
project
title
scale/date
drwg no
LB Brent
Concrete furniture1:20 & 1:10 at A1, 03.06.1514287/DET01 rev-DRAFT1
Wood House Urban Park
DRAFT 03.06.15 DT comments
22b Regent Studios, 8 Andrews Rd, London E8 4QN, t.020 72546336erectarchitecture.
DRAFT1 11.06.15 For information
Bench type 1a & 1b elevations1:2001
Bench type 1a & 1b plan1:20 & 1:1001
1:2001 Bench type 2 section
1:2001 Bench type 2 elevation
1:2001 Bench type 2 plan
1:2001 Bench type 3 elevation
1:2001 Bench type 3 elevation
Bench type 3 plan1:2001
6010
6010
6010
6010
6010
6025
25
R 25
R 25
R 25
Type 1a & 1b
Type 3
Type 3
Type 3
Plan1:10001
1:2001 Bench type 2 section
1:2001 Bench type 2 elevation
1:2001 Bench type 3 section
1:1001 Bench type 1a section
R 25R 25
25
4010
Bench type 1a & 1b elevation1:1001Bench type 1a elevation
1:2001 1:2001 Bench type 1a section Bench type 1b elevation1:2001 1:2001 Bench type 1b section
Slope 1:80
Bench type 1a & 1b perspectivents01
Bench type 1a, perspectivents01Bench type 1a & 1b, perspective
nts01
Bench type 2 perspectivents01 Bench type 3 perspective
nts01
General notes:
Timber battens are fixed to a frame of either flatstainless steel strips or rectangular sections.Rectangular sections are used where the framesspan between supports (type 2)The frames are screw fixed to the concretefurniture and can be easily removed shouldvandalism occur.
Timber battens: 40x60mm, thermo treated oak,sanded smooth, radius 3mm to all edges, nocoating, supplied by Bad Essener Saegewerk,http://www.bad-essener-saegewerk.de/
Screws: Stainless steel, size and type tbc by SE,screwed in from below
Flat bars: Stainless steel?? or galvanised,pre-drilled, 50mm wide? size?
Fixings between metal frame and concrete: Pin hexHafren shield anchor or similar, stainless steel,what size?
Concrete furniture:Type of concrete: ?Mould specification: ?
All edges and corners to have 25mm radiiTo prevent surface staining caused by rainwaterrun-off horizontal surface are sloping inwards anddrain through a hole.
Fixing: Cast in or free-standing
Surface to be hand finished to remove anyimperfections and acid washed.Coating: TBC but definitely anti-graffiti coating
Type 2
1990 10 1990 10 1990 10 1990 10 1990
0 100 250mm 1000mm = 1m 1:20
all drawings are copyright of erectarchitecture, do not scale from drawings,the contractor is to verify all dimensions on site prior to any manufacture
client
project
title
scale/date
drwg no
LB Brent
Concrete furniture1:20 & 1:10 at A1, 03.06.1514287/DET01 rev-DRAFT1
Wood House Urban Park
DRAFT 03.06.15 DT comments
22b Regent Studios, 8 Andrews Rd, London E8 4QN, t.020 72546336erectarchitecture.
DRAFT1 11.06.15 For information
Bench type 1a & 1b elevations1:2001
Bench type 1a & 1b plan1:20 & 1:1001
1:2001 Bench type 2 section
1:2001 Bench type 2 elevation
1:2001 Bench type 2 plan
1:2001 Bench type 3 elevation
1:2001 Bench type 3 elevation
Bench type 3 plan1:2001
6010
6010
6010
6010
6010
6025
25
R 25
R 25
R 25
Type 1a & 1b
Type 3
Type 3
Type 3
Plan1:10001
1:2001 Bench type 2 section
1:2001 Bench type 2 elevation
1:2001 Bench type 3 section
1:1001 Bench type 1a section
R 25R 25
25
4010
Bench type 1a & 1b elevation1:1001Bench type 1a elevation
1:2001 1:2001 Bench type 1a section Bench type 1b elevation1:2001 1:2001 Bench type 1b section
Slope 1:80
Bench type 1a & 1b perspectivents01
Bench type 1a, perspectivents01Bench type 1a & 1b, perspective
nts01
Bench type 2 perspectivents01 Bench type 3 perspective
nts01
General notes:
Timber battens are fixed to a frame of either flatstainless steel strips or rectangular sections.Rectangular sections are used where the framesspan between supports (type 2)The frames are screw fixed to the concretefurniture and can be easily removed shouldvandalism occur.
Timber battens: 40x60mm, thermo treated oak,sanded smooth, radius 3mm to all edges, nocoating, supplied by Bad Essener Saegewerk,http://www.bad-essener-saegewerk.de/
Screws: Stainless steel, size and type tbc by SE,screwed in from below
Flat bars: Stainless steel?? or galvanised,pre-drilled, 50mm wide? size?
Fixings between metal frame and concrete: Pin hexHafren shield anchor or similar, stainless steel,what size?
Concrete furniture:Type of concrete: ?Mould specification: ?
All edges and corners to have 25mm radiiTo prevent surface staining caused by rainwaterrun-off horizontal surface are sloping inwards anddrain through a hole.
Fixing: Cast in or free-standing
Surface to be hand finished to remove anyimperfections and acid washed.Coating: TBC but definitely anti-graffiti coating
Timber bench and log seating
Concrete bench type 1a and 1b
Concrete bench type 2
Concrete bench type 3
Bespoke concrete/timber seating elements
Contemporary lighting features
Engaging sculptural seating feature
High quality amenity lawn areas
Reprovision of cycle stands and
dockless bike parking
Robust fencing and self closing gates
Existing art sculptures to be retained
Existing trees to be retained
Proposed Site Plan
1
Robust Highway palette
Attractive block paving detail
Bird house , Bees and butterfly house
1
2
3
4
5
6
9
10
11
12
2
2
36
5
9
10
10
7
11
11
12
12
12
Seasonal border along boundary7
Provision of general litter and recycling bins8
8
8
88
Malvern Road
Stuart Road
4
4
4
4
A
A
B
B
C C
Note: Images shown are representative only.
Enhanced Public Realm for South KilburnDischarge of Planning Condition for Chippenham Gardens Adopted Highway Land
PUBLIC EXHIBITION, 12 MARCH 2018 For more information please call the South Kilburn Regeneration Team - Tel: 0208 937 2149 or email: daniel.bailey@brent.gov.uk
Boundary planting Public FootpathSeating wall within
lawn areaSeating wall within lawn areaFootpathEntrance from
Stuart Road Lawn AreaBoundary
planting of shade tolerant species
Lawn AreaBoundary
planting of shade tolerant species
Section A-A Section B-B Section C-C
Proposed shade tolerant planting palette
Bellis perennis Liriope muscari ‘Monroe White’
Pachysandra terminalisLotus corniculatus Origanum vulgare Vinca minor
Hebe ‘Green Globe’Geranium-versicolor Hyacinthoides spp.
Polypodium cambricum
Heuchera ‘Delta-Dawn’
Monarda ‘Cambridge Scarlet’
• Create seasonal interest all year round with a palette of herbaceous planting
• Enhance biodiversity value by introducing diverse species
• Create a sense of enclosure by introducing evergreen border planting along the boundary
• Shade tolerant and hardy groundcover at the base of existing trees
• Irrigation to feed the planting beds which will ensure that maintenance is low and sustainable
Biodiversity
Enhanced Public Realm for South KilburnDischarge of Planning Condition for Chippenham Gardens Adopted Highway Land
PUBLIC EXHIBITION, 12 MARCH 2018 For more information please call the South Kilburn Regeneration Team - Tel: 0208 937 2149 or email: daniel.bailey@brent.gov.uk
Project Timeline
Chippenham Gardens planning
application submitted to Brent Planning
Authority
March 2016
Chippenham Gardens planning
permission granted(Planning condition no.11 attached- Enhancement of
Adopted Highway Land)
July 2016
South Kilburn Masterplan Review
begins (6 months consultation)
June 2016
South Kilburn Masterplan review
concluded
Late 2016
Consultation on South Kilburn Supplementary
Planning Document 2017
February -March 2017
Adoption of the South Kilburn
Supplementary Planning Document 2017
June 2017
Adopted Highway Land redesign for
discharge of Planning Condition 11
Public Exhibition12 March 2018
Adopted Highway Land redesign
submitted to Brent Planning Authority
Early Spring 2018
Procurement for Delivery Partner /
Contractor
Early/Late Spring 2018*
Works commence on site
Autumn/ Winter 2018*
Proposed view from Malvern Road Proposed view looking through site towards Stuart Road
Works completed by
2019-2020*
* Please note these dates are subject to change
12
Key Plan
Chippenham Gardens
Malvern Road
Stuart Road
1 2
top related