diagnostic equipment for vehicles trailer socket...
Post on 23-Aug-2020
1 Views
Preview:
TRANSCRIPT
Diagnostic equipment for vehicles
Trailer Socket Tester
Trailer Socket Tester 24 V 7 Poles
Application
• Testing of the socket on the towing vehicle
Product advantages
• Complete indicator test through load resistances
• Rubber protection taps for contacts
• Clear reading through labeled LEDs with clamp indication
possible
Article
No.
Article
Designation
PU
Piece
138965 Trailer Socket Tester 1
V1.7.6.5/IN
T_P_
MP120/1/12-08-17/#780125[36920]
4.1
Diagnostic equipment for vehicles
Radiator Testing Instruments and Supplies
Test Control Unit 50400
Application
• Used for controlling of the complete cooling system with
leak and loss of pressure
Properties
Quick coupling and safety pressure relief valve,
Range 0-2 bar
Delivery amount
• Includes standard adapter (Ø 57 mm) with lock bayonet
Article
No.
Article
Designation
PU
Piece
305316 Cooling system tester 50 400 1
Accessories available PU
044823 Flexible hose 50 cm 1
Carbon Dioxide Leak Tester
Application
• Rapid and easy detection of leaking parts in cylinder head
gasket, cylinder head and engine block
• Secure detection thanks to discolouration of the reaction
liquid
• For all water cooled engines
Article
No.
Article
Designation
PU
Piece
111961 26470 Leak Tester Set complete 1
Scope of supply Amount
127558 26471 Carbon Dioxide Leak Tester 1
110680 Reactions Liquid 300ml 1
112275 Rinsing Liquid 300ml 1
V1.
7.6.
5/IN
T_P_
MP1
20/2
/12-
08-1
7/#7
1935
0[38
789]
4.2
Diagnostic equipment for vehicles
Adapter for Tester 50400
Properties
Adapter with bayonet lock
Image 1 Image 2 Image 3 Image 4
Image
No.
Article
No.
Article
Designation
Ø
mm
PU
Piece
1 416851 Cooler adapter 50433 45 1
2 305251 Cooler adapter 50 460 47 1
3 305243 Cooler adapter 50 420 57 1
4 145832 Universal Adaptor KL-0124-620 60 1
Adapter for Tester 50400
Properties
Adapter with plastic screwing cap
Image 1 Image 2 Image 3 Image 4 Image 5 Image 6 Image 7
Image
No.
Article
No.
Article
Designation
Threads PU
Piece
1 305278 Cooler adapter 50423 45,6 x 3 1
2 305260 Cooler adapter 50422 48 x 3 1
3 305286 Cooler adapter 50431 52 x 3 1
4 305294 Cooler adapter 50432 52 x 3 1
5 412767 Cooler adapter 50438 54 x 4 1
6 141024 Cooler adapter 50465 63 x 3 1
7 145833 Adapter for Japanese vehicles - 1
V1.7.6.5/IN
T_P_
MP120/2/12-08-17/#719350[38789]
4.3
Diagnostic equipment for vehicles
Battery Testing / Charging / Servicing Devices
Battery Charging Device BHFB 05 12 V
Microprocessor controlled battery charging device for lead/acid, gel, calcium and AGM (felt) batteries
Product advantages
• Charging 5 A to 12 A – allows perfect, fast and gentle
charging of batteries
• Usage range batteries from 10 Ah to 200 Ah, suitable for
many vehicle batteries
• Batteries can be charged in mounted status
• Reliable protection of the board electronics, control devices,
airbag etc.
• Reverse polarity protection
• Ability to charge continuously/leave charging – ideal for
seasonal vehicles
• Splashproof and Dustproof
• Recommended of Daimler AG
Technical data
Power: 5 A/12 A switchable
Cable length: 180 cm
Dimensions (W x D x H): Approx. 195 x 95 x 57 mm
Weight: Approx. 0.8 kg
Article
No.
Article
Designation
PU
Piece
120780 Battery Charging Device BHFB 05 12V 1
Battery Tester 210
Application
• Testing of 12 V batteries and generators
Product advantages
• Easy operation with fast results almost after 15 seconds
• Suitable for all standard batteries and batteries with GEL
technology
• The test does not strain the battery, due to testing at low
voltage no sparks or overheating and thus no harm to the
electronics
Properties
Digital display with lighting, stable case with soft framing, the
testing of the batteries is performed in accordance with the
standards EN, DIN, IEC, SAE and JS, including reverse polarity
Delivery amount
• Nylon transport case
Article
No.
Article
Designation
PU
Piece
030976 Battery Tester 210 1
Spares PU
150340 Pole Pliers 1
150341 Pole Pliers 1
V1.
7.6.
5/IN
T_P_
MP1
20/3
/12-
08-1
7/#7
8013
2[37
057]
4.4
Diagnostic equipment for vehicles
Battery Charging / Servicing Device BHFL16A / 6 + 12 Volt
Microprocessor controlled battery charging / servicingdevice for lead/acid, gel, calcium and AGM (felt) batteriesand maintenance free batteries
Product advantages
• Monitoring free 100 % full charging of vehicle batteries
• Field of application of batteries from 4 Ah to 300 Ah
• Service charge program-> supports CAN BUS systems with
diagnosis, service, and customer service (“flashing”) so that
the battery still remains fully charged when switched on or
being used.
• Support operation up to max. 16 A -> voltage maintenance
during the changing of the battery prevents data loss
• Reliable protection of the board electronics, control devices,
airbag etc.
• Short circuit and reverse polarity protection
• Reactivating program for the charging of fully discharged
batteries
• Ability to charge continiously/leave charging
• Self protection function
• Recommended by Daimler AG
Technical data
Charging voltage: 7.4 V respectively 14.4 V
Nominal charging current: 16 A
Characteristics: IUoU
Temperature: 0 °C up to 35 °C
Cooling: Convection and via casing
Nominal current: 180 V – 260 V 50/60 Hz
Convection and via casing nominal current: 1.8 A (at full
charging current)
Protection type: IP 20
Dimensions (W x D x H): Approx. 250 x 142 x 115 mm
Weight: 1.4 kg
Note
• Warning: Real 16 amperes arithmetically at 14.4 volts
• Manual selectable charging levels: 6 V - 2 A / 12 V - 2 A / 12 V
- 8 A / 12 V - 16 A
Article
No.
Article
Designation
PU
Piece
059522 Battery Charging / Servicing Device BHFL 16A 1
V1.7.6.5/IN
T_P_
MP120/3/12-08-17/#780132[37057]
4.5
Diagnostic equipment for vehicles
Battery Charging / Servicing Device BHFL65A / 12 + 24 Volt
Microprocessor controlled battery charging / service devicefor lead/acid, gel, calcium and AGM (felt) batteries andmaintenance free batteries
Product advantages
• Monitoring-free 100% full charging of vehicle batteries
• Field of application of batteries from 10 Ah to 1000 Ah
• Service -> supports CAN BUS systems with diagnosis,
service, customer service (“flashing”) so that the battery still
remains fully charged when switched on or being used.
• Support operation up to max. 65 A -> voltage maintenance
during the changing of the battery prevents
• LCD-display -> easy operation, current information is simply
read
• Reliable protection of the board electronics, control devices,
airbag etc.
• Short circuit and reverse polraity protection
• Reactivating program for the charging of fully discharged
batteries
• Ability to charge continuously/leave charging
• Self protection function
• Wall mounting possible
• Recommended by Daimler AG and Porsche
Technical data
Charging voltage: 14.4 respectively 28.8 V
Nominal charging current: 65 A (12 V) respectively 35 A (24 V)
Charging characteristics: IUoU
Environment temperature: 0 °C up to 35 °C
Cooling: Temperature controlled
Fan nominal voltage: 180 V – 260 V 50/60 Hz
Power consumption from network: 5.2 A (at full charging
current)
Protection type: IP 20
Dimensions (W x D x H): approx. 283 x 303 x 100 mm
Weight: 3.8 kg
Note
• Warning: Real 16 amperes arithmetically at 14.4 volts
• Manually selectable charging levels: 6 V - 2 A / 12 V - 2 A / 12
V - 8 A / 12 V - 16 A
Article
No.
Article
Designation
PU
Piece
059523 Battery Charging / Servicing Device BHFL 65A 1
V1.
7.6.
5/IN
T_P_
MP1
20/3
/12-
08-1
7/#7
8013
2[37
057]
4.6
Diagnostic equipment for vehicles
Battery Tester with Printer
Application
• 12 V Starter batteries, lead acid, AGM and GEL
• 12 V Starter and charging systems
Product advantages
• Tests lead acid (liquid), AGM (felt) and GEL batteries
• Possible to test discharged batteries
• 5 button operation -> simple button selection of the
temperature parameters and the menu functions
• Tester and printer in one -> fast test results and test result
document for the customer
• Workshop address can be entered and is also visible on the
print out
• Servo-Technology recognizes bad connections. A good
connection is guaranteed through the movement of the
connection clamps and thus correct testing
• The actual cold start performance and the charging status of
the battery, the starter and charging systems are diagnosed
and printed
• Surface voltage procedure-> the device recognizes a surface
voltage, which may distort the test result. By switching on
the consumer (light, fan...), the surface voltage can be
eliminated
• Temperature-compensation
• Recognition of defect cells
• Reverse polarity protection
• 19 languages can be set
Technical data
Standards: EN, DIN, SAE and IEC
Operation ranges: 100 – 900 A
Operation ranges: 100 – 550 A
Voltmeter: 0 to 30 VDC +/- 0.05 VDC
Display: 2 lines LCD-Graphic display
Operating temperature: -18 °C to +50 °C
Cable length: 533.4 mm
Dimensions: 230 mm x 102 mm x 65 mm
Weight: 499 g
Article
No.
Article
Designation
PU
Piece
043285 Battery Tester with Printer 35P 1
V1.7.6.5/IN
T_P_
MP120/3/12-08-17/#780132[37057]
4.7
Diagnostic equipment for vehicles
Motometer Compression Recorder
Compression Pressure Recorder – Set forOtto and Diesel Engines
Delivery amount
• 1 Compression Pressure Recorder Otto Engine 3.5 – 17.5 bar
• 1 Compression Pressure Recorder Diesel Engine 10 – 40 bar
or 10 – 60 bar
• 1 Pressure Hose
• 3 Extensions 70 mm, 105 mm and 140 mm
• 1 Gusset
• 1 Straight Nipple Adapter
• 3 Rubber Cones with Nozzles
• 2 Packages containing Diagram Sheets Otto/Diesel
• 1 List for Connection Nipples/User Guide
Article
No.
Article
Designation
PU
Piece
104747 Compression Pressure Recorder 1
104746 Compression Pressure Recorder 1
Compression Pressure Recorder – Set for toEngines
Delivery amount
• 1 Compression Pressure Recorder 3.5 – 17.5 bar
• 1 Pressure Hose
• 3 Extensions 70 mm, 105 mm and 140 mm
• 1 Gusset
• 1 Straight Nipple Adapter
• 3 Rubber Cones with Nozzles
• 1 Package containing Diagram Sheets
• 1 List for Connection Nipples/User Guide
Article
No.
Article
Designation
PU
Piece
306614 Compression Pressure Recorder 1
Compression Pressure Recorder – Set forDiesel Engines
Delivery amount
• 1 Compression Pressure Recorder Diesel Engine 10 – 40 bar
or 10 – 60 bar
• 1 Pressure Hose
• 1 Straight Nipple Adapter
• 1 Package containing Diagram Sheets
• 1 List for Connection Nipples/User Guide
Article
No.
Article
Designation
PU
Piece
306622 Compression Pressure Recorder Set 1
306630 Compression Pressure Recorder Set 1
V1.
7.6.
5/IN
T_P_
MP1
20/4
/11-
11-1
8/#7
8013
9[38
501]
4.8
Diagnostic equipment for vehicles
Hoses
Properties
SK 1001 with quick coupling and nipple
SK with 2001 screw connection
SK 2001 SK 1001
Article
No.
Article
Designation
Length
mm
PU
Piece
207098 High pressure hose SK 2001, for diesel
engines
285 1
306584 Pressure hose SK 1001, for gasoline and
diesel engines
350 1
Rubber Cone with or without Nozzles
Properties
With quick coupling, for gasoline engines Prod. no.
306525 Prod. no.
306606
Prod. no.
104748 Prod. no.
306592
Prod. no.
306533Prod. no.
207071
Article
No.
Article
Designation
Ø
mm
PU
Piece
306525 Rubber cone with 63 ° nozzle SK 1007 17 1
306606 Rubber cone 63 ° SK 0500 17 1
104748 Rubber cone with 63 ° nozzle SK 1013 21 1
306533 Rubber cone 30 ° SK 0200 21 1
207071 Rubber cone 30 ° with socket SK 1006 21 1
306592 Rubber cone 63 ° SK 0400 21 1
Back Pressure Valve
Article
No.
Article
Designation
PU
Piece
207080 Check valve SK 1003 1
Nipple Adapter
Properties
With quick coupling, for diesel engines, link between the
nipple and compressor pressure recorder Art.-No. 306657
Art.-No. 306649
Article
No.
Article
Designation
PU
Piece
306649 Nipple SK 1008 1
306657 Nipple SK 1008 1
V1.7.6.5/IN
T_P_
MP120/4/11-11-18/#780139[38501]
4.9
Diagnostic equipment for vehicles
Extensions
Art.-No. 306568, 306541 Art.-No. 207233
Art.-No. 306576
Article
No.
Article
Designation
Length
mm
PU
Piece
306568 Extension, SK 1003 70 1
306576 Extension, SK 1002 105 1
306541 Extension SK 1005 140 1
207233 Extension, SK 2003 155 1
Connection Nipple for Nozzle HolderOpening (D)
Art.-No. 124646
Art.-No. 124652
Art.-No. 124645
Article
No.
Article
Designation
PU
Piece
124645 Nipple 1
124646 Nipple 1
124652 Nipple 1
Connection Nipple for Glow Plug Hole (G)
Art.-No. 104732
Art.-No. 124635 Art.-No. 124638
Art.-No. 124640
Art.-No. 124637
Article
No.
Article
Designation
PU
Piece
104732 Nipple 1
124637 Nipple
Slider Plate
Application
• Fixing of the graph sheets
Article
No.
Article
Designation
PU
Piece
207063 Slider Plate 1
V1.
7.6.
5/IN
T_P_
MP1
20/4
/11-
11-1
8/#7
8013
9[38
501]
4.10
Diagnostic equipment for vehicles
Contact Handle
Application
• Starter activity
Product advantages
• The handle enablesa pressure test, which is required or can
be performed by 1 person
• The handle enables a pressure test is required by 1 person
• The handle can be fitted to all pressure recorders
Article
No.
Article
Designation
PU
Piece
207047 Contact Handle 1
Chart Sheets
Properties
Design UK 12 = gasoline engine max. 12 bar
Design UK 17.5 = gasoline engine max. 17.5 bar
Design DM 40 = diesel engine max. 40 bar
Design DM 60 = diesel engine max.60 bar
Article
No.
Article
Designation
Content
Piece
PU
Piece
167614 UK chart sheets 12 SB 400 1
167622 Chart sheets SB UK 17.5 400 1
167630 Chart sheets DM 40 SB 400 1
929107 Chart sheets 60 SB DM 400 1
V1.7.6.5/IN
T_P_
MP120/4/11-11-18/#780139[38501]
4.11
Diagnostic equipment for vehicles
Battery Acid/Frost Protection Tester
Frost Protection Tester for Coolant
Application
• Testing the percentage of frost protection (Ethandiol,
Ethylenglykol) in the coolant
Product advantages
• Direct reading of all motor temperatures by using the same
control procedure
• Turning valve prevents dripping
• Reading the value scale guarantees a simple, quick and
exact measurement
• No need to hold the instrument vertically thanks to the
pendulum indicator
• Solid plastic housing
Article
No.
Article
Designation
PU
Piece
140089 Frost protection tester for coolant 1
Antifreeze and coolant tester for windowwashing system
Application
• Used for checking the antifreeze component in the
windshield washer
Product advantages
• Quick reading through color and numerical scale
• Robust design with plastic cylinder
Properties
For isopropanol / methanol / water mixture, display range from
0 ° C to -30 ° C
Article
No.
Article
Designation
PU
Piece
140091 Antifreeze tester 1
V1.
7.6.
5/IN
T_P_
MP1
20/5
/12-
08-1
7/#7
1935
6[38
657]
4.12
Diagnostic equipment for vehicles
Antifreeze, radiator, windshield washer andbattery acid tester FT 2030
Application
• Control of cooler, plate frost protection and battery acid
Product advantages
• 1 device for three different tests
• Result can be already measured with a test drop
• Adjustable eyepiece to balance individual vision
• Scale display is easily visible
Properties
G12 antifreeze suitable for (Audi ), frost protection G12 suitable
Article
No.
Article
Designation
PU
Piece
204773 Antifreeze tester 1
Spares PU
119525 Replacement plate 1
Battery Acid Tester
Application
• Checking the density of cars batteries acid
Product advantages
• Quick reading through color and numerical scale
• Robust design with plastic cylinder
Properties
Selection of 1:10 to 1:30 kg / dm ³ is possible
Article
No.
Article
Designation
PU
Piece
140092 Battery Acid Tester 1
V1.7.6.5/IN
T_P_
MP120/5/12-08-17/#719356[38657]
4.13
Diagnostic equipment for vehicles
Headlight Adjustment Device
Headlight Adjustment Device with MirrorVisor
Application
• Controlling and testing of headlights of any type of
motorbike, car as well as lorry
• Precise and fast adjustment of vehicle headlights (normal
beam, full beam and fog light)
Product advantages
• Controlling of normal beam, full beam and fog light
• 2 photodiodes for normal beam, full beam intensity
• Pre-selection button for normal beam, full beam intensity
• Easy alignment of the device with help of a mirror visor
• Alignment of the optical box with help of an internal spirit
level
• An easy height adjustment of the casing guaranteed by
spring balancer
• Polycarbonate optical lens
• Also appropriate for Xenon headlights
Technical data
Operating height min: 240 mm
Operating height max: 1410 mm
Width: 600 mm
Length: 670 mm
Heigth: 1740 mm
Weight: 30 kg
Properties
Mechanical headlight adjustment device with mirror visor and
analogous lux meter
Article
No.
Article
Designation
PU
Piece
047894 Headlight Adjustment Device with Mirror Visor 1
Accessories available PU
639842 Cover for Headlight Adjustment Device 1
V1.
7.6.
5/IN
T_P_
MP1
20/6
/12-
08-1
7/#7
8012
9[36
977]
4.14
Diagnostic equipment for vehicles
Digital Video Endoscope
Digital Video Endoscope
Product advantages
• Perfect picture and video quality thanks to a special camera
Base station with LCD TFT 3.5" monitor
Integrated SD-memory card slot (up to 2 GB) inside the base
station
Charge control indicator on the hand-held unit
Internal microphone in the hand-held unit
Greatest possible angle of view thanks to the special
camera, probe head and attachement reflector
Probe head with 0°
Probe head with dimmable LED technology
Probe made from scratch resistant sapphire glass can be
added on Camera sleeve made of stainless steel
Durable color marking of different attachment reflectors
No use of glass fiber cable which makes the probes more
blend insensitive
Quick change of the probes through the standard adapter
system
Optimal handling through the wireless, radio-controlled
transfer of data
Easy operation with digital and multilingual menu navigation
Recording through photo, video and voice recording
Connection to a TV is possible
Technical data
Monitor: 16.7 Mio. colors
Frame rate: ~30 bps
Image storage format: JPEG (640 x 480)
Compression format: MPEG4
Starting size: NTSC and PAL
Transmitter frequency: 2.4 GHz 4 channels
Battery: Li-Polymer 3.7 V
Recharging time: Approx. 2 h
Operating time: Approx. 4 h
Operating temperature: -20 °C up to 75 °C
Voice guidance: 14 languages
Properties
All in one: Display, recorder, integrated light source and LCD
monitor, portable and independant power supply system
Hand haled to rechage on
base station
Digital Video- Endoscope Set
Included in delievery
Add on reflector
70°
Add on reflector
90°
Add on reflector
110°
Gauging
reflector
Article
No.
Article
Designation
PU
Piece
082749 Digital Video Endoscope Set 1
V1.7.6.5/IN
T_P_
MP120/7/12-08-17/#743956[658484]
4.15
Diagnostic equipment for vehicles
Scope of supply Amount
Base Station with LCD Monitor 1
Hand-held unit 1
Probe Ø 5.5 mm, 1 with Nose Camera 0°, spiral cable semi-
rigid
1
Battery recharging unit 110 V/220 V 1
1 GB SD Flash memory card 1
Attachment reflector 70° 1
Attachment reflector 90° 1
Attachment reflector 110° 1
AV Cable 2 m 1
Cleaning set for camera head and reflectors 1
Software CD and dongle 1
Gauging reflector 1
Plastic case (air seal) incl. foam insert 1
User manual 1
Accessories available PU
082750 Probe Ø 5.5 mm / 0° semi-rigid sprial 1m
082751 Probe Ø 5.5 mm / 0° PVC fully flexible 2m 1
082752 Probe Ø 5.5 mm / 0° PVC fully flexible 3m
082753 Probe Ø 5.5 mm / 90° semi-rigid spiral 1m
082754 Probe Ø 5.5 mm / 90° PVC fully flexible 2m
082755 Probe Ø 5.5 mm / 90° PVC fully flexible 3m 1
097419 Probe Ø 3.9 mm / 90° semi-rigid spiral 1m
V1.
7.6.
5/IN
T_P_
MP1
20/7
/12-
08-1
7/#7
4395
6[65
8484
]
4.16
Diagnostic equipment for vehicles
Diverse Testing Devices
Diesel Injection Nozzle Tester
Application
• Testing of diesel injection nozzles in detached status
• Testing of injection pressure and atomization
Main user
Car repair shops, truck repair shops
Product advantages
• Reservoir for collecting fuel during the test procedure
• Glass splash protection against injury and spray fog
• Table mounting of the tester is possible
Article
No.
Article
Designation
PU
Piece
107818 Diesel Injection Nozzle Tester 1
Spares PU
114799 Splash Protection for Injection Nozzle Tester 1
Engine Stethoscope
Application
• Fast localization of knocking, dragging and bearing sounds
due to ultra sensitive sound detector
Delivery amount
• Incl. sensor extension for hard to reach areas
Note
• Attention must be paid whilst the engine is running
Article
No.
Article
Designation
PU
Piece
823454 Engine Stethoscope 1
V1.7.6.5/IN
T_P_
MP120/8/12-08-17/#780154[42274]
4.17
Diagnostic equipment for vehicles
Service Gauge Devices
Vehicle Usage Service Interval Resetter A/V
Note
• The vehicles in the table below indicate the starting model.
• Newer manufacture years are automatically suitable.
• Touran, Golf V and Touareg are not suitable
VW Man. year Audi Man. year Ford Man. year Skoda Man. year SEAT Man. year
Sharan 96- A3 97- Galaxy 96- Octavia 97- Alhambra 96-
Polo 98- A4 95- Arosa 97-
Passat 97- A6/100 95-
Golf IV 98- A8 96-
Lupo alle TT alle
T4 alle
Beetle alle
Bora alle
Vehicle Usage Service Interval Resetter Multi
Note
• The vehicles in the table below indicate the starting model.
• Newer manufacture years are automatically suitable.
• Touran, Golf V and Touareg are not suitable
VW Man. year Audi Man. year Ford Man. year Skoda Man. year SEAT Man. year BMW Man. year
Sharan 96 A3 97 Galaxy 96 Octavia 97 Alhambra 96 alle 87
Polo 98 A4 95 Felicia alle OBD Arosa 97 alle OBD
Passat 97 A6/100 95
Golf IV 98 A8 96
Lupo alle TT alle
T4 alle
Beetle alle
Bora alle
V1.
7.6.
5/IN
T_P_
MP1
20/9
/12-
08-1
7/#7
8015
8[88
464]
4.18
Diagnostic equipment for vehicles
Service Interval Resetter CAN Bus
Service Interval Resetter BMW CAN
All BMW Models man year 1987 to 03/2006
Application
• Resetting of the oil service and inspection interval displays
Main user
Car repair shops
Product advantages
• This service interval resetter resets the microprocessor
controlled by the according to the instructions of the vehicle
manufacturer.
• Both plugs (20 pole BMW and OBD-II plug) united in one
device
• Compact construction of the interval resetter
• Easy operating surface / foil keyboard
• Protection class IP 67; extremely stable against humidity,
dirt, oils and mechanical loading
• 24 month guarantee
Technical data
Operating voltage: 12 VDC
Power consumption: 30 mA
Weight: Approx. 220 g
Temperature range: -10°C/+40°C
Protection class: IP 67
Adaptation: 20 pole BMW socket or OBD-II
Properties
The digital resetter communicates, depending on
vehicle model, via the 20 pole BMW service socket or the
OBD-II socket with the vehicle electronics
Delivery amount
• Service Interval Resetter
• User Guide
Detail Operating Surface
BMW-Model
3 5 7 X3 X5 Z3 Z4 Z8 Mini Rover from
manu. year
2001
E30 E34 E32 E83 E63 E36/7 E85 E52 75
E36 E39 E38 E36/8
E46
Article
No.
Article
Designation
PU
Piece
049916 Service Interval Resetter BMW-CAN 1 V1.7.6.5/IN
T_P_
MP120/10/12-08-17/#780164[431323]
4.19
Diagnostic equipment for vehicles
Service Interval Resetter VAG CAN
Audi, Seat, Skoda and VW vehicles all models up to MY06/2006
Application
• Resetting of the oil service and inspection interval displays
(oil, Service, IN1, IN2, insp., or airbag control light)
Main user
Car repair shops
Product advantages
• Automatic vehicle identification
• Automatic re-programming of the service interval display
according to manufacturer guidelines
• A long-life service value can additionally be read and re-
programmed if necessary
• With CAN Bus vehicles, the airbag failure memory and thus
the airbag control light in the combi instrument can be
deleted
• The service interval resetter can be updated
• Protection class IP 67; extreme stable against humidity, dirt,
oils and mechanical loading
• 24 months guarantee
Technical data
Operation voltage: 12 VDC
Power consumption: 100 mA
Temperature range: -10°C/+40°C
Weight: ca. 230 g
Protection class: IP 67
Adaptation: OBD II
Properties
The service interval resetter VAG CAN for the service interval
display communicates via the OBD II socket with the vehicle.
Reset occurs automatically via K line or CAN line protocol
Delivery amount
• Servive interval resetter
• User manual
Audi
til. man. year 06/2006
VW
til. man. year 06/2006
Seat
til. man. year 06/2006
Skoda
til. man. year 06/2006
Ford
til. man. year 06/2006
A 100 /Man. year 95-97 Golf IV Arosa Octavia Galaxy
A2 Golf V Ibiza Fabia Galaxy 2.8
A3 Bora / Jetta Cordoba Superb
A4 / A4 Cabrio Polo Toledo
A6 / A6 Allrad Fox Alhambra
A8 Lupo Leon
TT New Beetle Altea
S2 New Beetle Cabrio
S4 Passat
S6 Sharan
S8 Touareg
Q7 Touran
Phaeton
Caddy
T4- / T5-Bus
Article
No.
Article
Designation
PU
Piece
049915 Service Interval Resetter VAG CAN 1
V1.
7.6.
5/IN
T_P_
MP1
20/1
0/12
-08-
17/#
7801
64[4
3132
3]
4.20
Torque wrenches
Torque Wrenches
Torque Wrench "Topline" Measuring Range2.5 – 320 Nm
Application
• Precise tightening and control of screw connections
Product advantages
• With automatic triggering (acoustic and tangible) when the
set value has been reached
• Permanent scaling, which is resistant to shock and impact
• Clockwise and counter-clockwise tightening with set value by
means of toggle ratchet
• Reduced danger of slipping and injury thanks to handle with
collar and rotating ring
• Fine-scaling, as it is precisely adjustable to 0.5 Nm or 1 Nm
Properties
Accuracy of +/- 3% of the scale value (in the direction of
operation), acc. to DIN EN ISO 6789, safe fixation of the value
due to locking at the rotating ring
Delivery amount
• With test certificate
Article
No.
Article
Designation
Measuring range
Nm
Drive
inches
Length
mm
PU
Piece
025669 Torque Wrench 2,5 - 25 1/4" 232 1
025670 Torque Wrench 10 - 60 3/8" 320 1
025671 Torque Wrench 40 - 200 1/2" 512 1
025672 Torque Wrench 60 - 320 1/2" 632 1
Torque Wrench Measuring Range 300 - 800Nm
Product advantages
• With automatic triggering (acoustic and tangible) when the
set value has been reached
• Permanent scaling, which is resistant to shock and impact
• Clockwise and counter-clockwise tightening with set value by
means of toggle ratchet
• Reduced danger of slipping and injury thanks to handle with
collar and rotating ring
• Fine-scaling, as it is precisely adjustable to 0.5 Nm or 1 Nm
Properties
Accuracy of +/- 2% of the scale value (in the direction of
operation), acc. to DIN EN ISO 6789:2003 (D)
Delivery amount
• With test certificate
Article
No.
Article
Designation
Measuring range
Nm
Drive
inches
Length
mm
PU
Piece
047838 Torque Wrench 300 - 800 3/4" 1280 1
V1.7.6.5/IN
T_P_
MP100/1/12-08-17/#780168[131051]
4.21
Torque wrenches
Rotation Angle Measurement Device
Application
• Angle-controlled screw tightening
Product advantages
• Attachable on all 1⁄2“ torque wrenches
• With magnetic and alligator clamp for locking/fixation
Article
No.
Article
Designation
PU
Piece
207268 Rotation Angle Meas. Device 1
Torque Wrench Gauge Range 400 - 1000 Nm
Product advantages
• With automatical release, can be heard and felt upon
reaching the set value
• Release power 590 N (~ approx. 60 kg)
• Continuous scaling, therefore insensitive to impact and fall
effect
• Clockwise and counter-clockwise tightening with set value by
means of toggle ratchet
• Turning head for additional locking of the setting
• 2 parts, detachable, in bag
Properties
Accuracy of +/- 3 % of scale value (in usage direction)
according to DIN EN ISO 6789:2003 (D)
Delivery amount
• With test certificate, bag and unlocking tool
Article
No.
Article
Designation
Measuring Range
Nm
Drive
inches
Length
mm
PU
Piece
051826 Torque Wrench 400 - 1000 3/4" 1788 1
V1.
7.6.
5/IN
T_P_
MP1
00/1
/12-
08-1
7/#7
8016
8[13
1051
]
4.22
Torque wrenches
Torque Wrench Measuring Range 2 - 750 Nm
Application
• Precise tightening of screw connections
Product advantages
• Accuracy of +/- 3% of the set scale value
• Micrometer setting guarantees exact and quick setting of the
required value
• Safe operation due to ergonomic handle, no slipping
• Acoustic signal shows that the set value has been reached
Delivery amount
• With test certificate
2 — 25 Nm 5 — 60 Nm
75 — 400 Nm
140 — 750 Nm
Repositioning
square
replacement part
Article
No.
Article
Designation
Measuring range
Nm
Drive
inches
Length
mm
PU
Piece
000597 Torque Wrench 2 - 25 1/4" 350
001297 Torque Wrench 5 - 60 3/8" 350
000600 Torque Wrench 20 - 200 1/2" 480
000601 Torque Wrench 60 - 300 1/2" 575
000602 Torque Wrench 75 - 400 1/2" 625
000603 Torque Wrench 140 - 750 3/4" 1230
Spares Drive
inches
PU
Piece
114487 Torque Wrench 1/2" 1
115076 Torque Wrench 3/4" 1
114488 Torque Wrench 3/8" 1
V1.7.6.5/IN
T_P_
MP100/1/12-08-17/#780168[131051]
4.23
Torque wrenches
Torque Wrench with Repositioning Square Wrench
Torque Wrench with Repositioning SquareWrench Measuring Range 1 - 750 Nm
Application
• Precise tightening and control of screw connections
Product advantages
• Large inspection window with magnifying effect
• Scale in Nm and lbf/ft division for precise adjustment
• Additional micrometer scale in Nm for an accurate and fine
adjustment
• Robust 60-tooth ratchet mechanism
• Ergonomic, hand-friendly two-component handle for easy
operation
• Change of the operating direction (inversing and
counterclockwise suit) effected by the drive square
• Simple setting of the torque by pulling out and inserting the
slide button on the handle end
• The achievement of the desired torque is indicated audible
and tactile signals
Properties
Accuracy of + / - 3% of the preset scale value (in operating
direction), according to DIN EN ISO 6789
Delivery amount
• With inspection certificate
Note
• After use, relieve spring and set to the lowest value!
Art.-No. 86470
Art.-No. 86472 Art.-No. 86467
Detail 1/4"
Detail 3/8"
Detail 1/2"
Article
No.
Article
Designation
Measuring range
Nm
Drive
inches
Length
mm
PU
Piece
086467 Torque Wrench 1 - 25 1/4" 289
086472 Torque Wrench 5 - 50 3/8" 350
086468 Torque Wrench 20 - 200 1/2" 500
086469 Torque Wrench 60 - 320 1/2" 585
086470 Torque Wrench 80 - 420 1/2" 678
086471 Torque Wrench 140 - 750 3/4" 1250
Repositioning Square Wrench
Properties
Mushroom square made of chrome-vanadium steel with
ballistic protection
Art.-No. 88084
Art.-No. 88087
Art.-No. 88088
Art.-No. 88090
Article
No.
Article
Designation
Length
mm
PU
Piece
088084 Torque Wrench Repositioning Square 3/8" - 1/4" 33 1
088087 Torque Wrench Repositioning Square 3/8" 33 1
088088 Torque Wrench Repositioning Square 1/2" - 3/8" 52 1
088090 Torque Wrench Repositioning Square 1/2 " 52 1
115076 Torque Wrench 71 1
V1.
7.6.
5/IN
T_P_
MP1
00/3
/12-
08-1
7/#8
4119
9[70
8578
]
4.24
Electronic measuring instrument
Multimeter
Multimeter Testing Device
Application
• Suitable for measuring and error detection in electric
variables in the control
Product advantages
• Multiple measuring device for electricity, voltage, resistance,
capacity, diode, transistor and continuity control
Technical data
Voltage DC: 0.2 – 600V
Voltage AC: 0.2 – 600V
DC current: 0.2 mA – 10 A
AC current: 2 mA – 10 A
Resistance: 200 Ohm – 20 M Ohm
Double insulation: 600V Cat. II/ 300 V Cat. III
Dimensions L x W x H: 165 x 85 x 40 mm
Properties
Large LCD display 3 1/2", overload protection
Delivery amount
• Incl. measurement wires, batteries
Article
No.
Article
Designation
PU
Piece
119836 Multimeter Testing Device 1
Accessories available PU
144333 Measuring wires, 2 parts 1
144131 Safety Clip Testing Probes Set red/black 1
144129 Alligator clip set red/black 1
144130 Safety measuring wire set red/black
144128 Safety test probes set red/black 1
Multimeter Measuring Wire Set
Product advantages
• Multi-purpose measuring wire set with 4 mm safety plug-in
Technical data
Current: up to 16 A
Voltage category: CAT III/1000 V
Alligator clips: CAT II/300 V
Article
No.
Article
Designation
PU
Piece
138968 Multimeter measuring line set 1
Content Amount
144131 Safety Clip Testing Probes Set red/black 1
144130 Safety measuring wire set red/black 1
144129 Alligator clip set red/black 1
144128 Safety test probes set red/black 1
V1.7.6.5/IN
T_P_
MP110/1/12-08-17/#780174[37012]
4.25
Electronic measuring instrument
Testing Device for Electronic Equipment
Testboy Professional
Application
• Testing of direct and alternating voltage of 1 2 – 690 V via
LED display, acoustical and visual continuity tests between 0
to 50 0 ohm, testing of the direction of the rotar y field, FI
trigger at 30 mA, phase search > 100 V
Product advantages
• One-handed operation via guide lugs
• Visual warning of life-threatening voltages via flashing LEDs
• Measuring probe protector which cannot be lost
Properties
Dust proof and water-jet proof (IP 65), tested and approved
acc. to TÜV/GS IEC/EN 61 243-3, 3 year manufacturer warranty
Delivery amount
• 2 x micro batteries (prod. no. 010525)
Article
No.
Article
Designation
PU
Piece
169216 Testboy Professional 1
Testboy 20
Application
• Visual continuity test up to 20 ohm, acoustic continuity test
up to 250 ohm
• Contact free voltage test
• 1 pin phase search
Product advantages
• LED torch function
• Insulated connection sockets and break-proof casing
Properties
Resistant against ingress of foreign objects and water jets (IP
44), tested and approved acc. to TÜV/GS IEC/EN 61010, 3 year
manufacturer warranty
Delivery amount
• 3 x mignon batteries (prod. no. 010524)
Article
No.
Article
Designation
PU
Piece
169217 Testboy 20 1
V1.
7.6.
5/IN
T_P_
MP1
10/2
/12-
08-1
7/#7
8017
8[88
478]
4.26
Electronic measuring instrument
Testboy 100
Application
• Contact free determination of alternating voltage (120–
1000V) with cable connectors, power outlets, fuses,
switching devices, contact boxes, lights and light chains
• Detection of cable breaks
Product advantages
• With LED torch function
Properties
Resistant against ingress of foreign objects and water jets (IP
44)
Delivery amount
• 2 x micro batteries (prod. no. 010525)
Article
No.
Article
Designation
PU
Piece
156731 Testboy line tester
V1.7.6.5/IN
T_P_
MP110/2/12-08-17/#780178[88478]
4.27
Electronic measuring instrument
Various Measuring Tools
Magnetic Field Tester
Checking magnetic fields contactlessly and fast
Application
• Testing of solenoid valve in hydraulic and pneumatic control
systems, relays, solenoids and solenoid valve by machine
tools
Product advantages
• Direct contact with the probe is often not necessary (cover
panels usually do not have to be removed). Tip lights up
when a magnetic field is present.
• With integrated high performance LED, which provides bright
and white light
Properties
Handy– Suitable for every bag or case, tested by TÜV/GS , 3
year warranty
Article
No.
Article
Designation
PU
Piece
043344 Magnetic Field Tester 1
Digital Clamp-on Ammeter
Application
• Change and equal voltage measurement ( AC and DC
voltage )
• Change and dc measurement (e.g. charging current dynamo,
leakage currents, cable disruptions)
• Resistance measurement
• Continuity and diode test
Product advantages
• Compact, handy device for versatile use with direct digital
LCD display
Technical data
Alternating voltage(DC): 0.1 V – 600 V
Direct volatge (AC): 0.1 V – 600 V
Alternating current (DC): 0.01 A – 400 A
Direct current (AC): 0.01 A – 400 A
Resistance: 0 - 400 Ohm
Way of proetction: IP 30
Weigth: 210 g
Dimensions: 194 x 72 x 35 mm
Length of test leads: 1.30 m
Properties
Battery change indicator, 3-year manufacturer's warranty,
tested by TÜV / GS (German Technical Inspection Association/
Safety Tested)
Delivery amount
• Current clamp, 2 test leads, case, 2 micro batteries (prod. no.
010525)
Article
No.
Article
Designation
PU
Piece
043345 Digital clamp-on ammeter 1
V1.
7.6.
5/IN
T_P_
MP1
10/3
/12-
08-1
7/#7
2070
7[40
859]
4.28
Electronic measuring instrument
Pliers Ammeter
Application
• Performance measurement of the generator
• Consumption measurement of the electric motor (starter,
wiper motor)
Properties
Measurement of DC and AC up to 2000 A, range from 200 A
to 2000 A can be selected
Multimeter
Accessories
Connection Diagram
Article
No.
Article
Designation
PU
Piece
145308 Pliers ammeter 1
Accessories available PU
250000 Multimeter Testing Device
Strobe Lamp for Gasoline Engines
Application
• Test: Preignition, engine speed, closing angle
• Can be used as a voltmeter
Properties
Digital display
Delivery amount
• Includes carrying case
Article
No.
Article
Designation
PU
Piece
149974 Strobe Lamp 1
V1.7.6.5/IN
T_P_
MP110/3/12-08-17/#720707[40859]
4.29
Electronic measuring instrument
Multifunction Control Light Tester
Application
• Used for localization of short circuits and bad mass contacts,
contuinity test of electrical components, such as supporter
electronics, relays, cooler blasts, fuel out-pump , lamps,
window controls etc.
Product advantages
• Polarity test without reversal
• Visual and acoustic display function
• Safety through self-test and short circuit protection
Delivery amount
• Including 6 m test cable with alligator clip
Connection diagram
Article
No.
Article
Designation
PU
Piece
116339 Multifunction Control Light Tester 1
Car Check Voltage Tester
Voltage Tester DC Voltage 3 – 48 V
Application
• Trouble-shooting of electrical components
Product advantages
• Polarity testing without reversal
• With pointed tip for insulated cables including crocodile
clamp
• Cable tester with LED-indicator
• Hooks for difficult to access wires
Connecting Illustration
Article
No.
Article
Designation
PU
Piece
715972 Car Check Voltage Tester 3-48 V 1
Test Lamp Metal
DC voltage tester 6-24 V
Application
• Testing / troubleshooting of electronic components such as
ignition, lighting system, etc.
Properties
With piercing tip for insulated wire and alligator clip
Delivery amount
• Includes protective cap for lancing tip
Article
No.
Article
Designation
PU
Piece
013560 Test Lamp 1
Spares PU
145179 Bulb for testing lamp 18V/3W 1
668338 Crocodile Clip 5A 10
V1.
7.6.
5/IN
T_P_
MP1
10/3
/12-
08-1
7/#7
2070
7[40
859]
4.30
Electronic measuring instrument
Voltage Tester Screwdriver
Properties
Insulated blade, can be used up to 250 V
Article
No.
Article
Designation
Blades
B x L mm
Total
length mm
PU
Piece
066885 Slotted Voltage Detector
Screwdriver
3 x 65 140 1
Brake Fluid Tester BFT 1
Application
• Checking the brake fluid for sharing of the water content
Product advantages
• Test result will be immediately read off
• Simple test - by test plug in the reservoir or brake cylinder
Properties
Suitable for brake fluid DOT 3 and DOT Class 4, status
indication through LEDs
Article
No.
Article
Designation
PU
Piece
326240 Brake Fluid Tester 1
Accessories available PU
010521 E-Block LR 61 battery 1
V1.7.6.5/IN
T_P_
MP110/3/12-08-17/#720707[40859]
4.31
Electronic measuring instrument
Gas Leak Detector
Application
• For the detection of gases (eg methane, natural gas, ethane,
butane, propane, hydrogen, carbon monoxide) in engine
rooms and leaks in vehicle lines with gas powered vehicles
Product advantages
• Illuminated sensor head - also visible in dark areas where the
leakage is
• Flexible swan neck of 460 mm - Ensures even hard to reach
areas are accessible
• Easy to use - easy to adjust the sensitivity through
adjustment wheel
• LED display of gas concentration to 1 vol% (= 10.000 ppm =
10.000 ml / m³)
Technical data
Sensor type: Solid state semiconductor
Sensitivity: < 50 ppm methane
Probe length: 460 mm
Operation time: 5 hours
Weight: 460 grm
Properties
Rugged, waterproof housing controlled, optical and acoustic
display, optical display battery status, processor
Delivery amount
• 1 gas leak detector
1 block battery 9 V
1 plastic case
Article
No.
Article
Designation
PU
Piece
011645 Gas Leak Detector 1
Brake Fluid Tester DOT 4
Application
• Handy tester for determination of brake fluid performance
DOT 4
Product advantages
• 5 light emitting diodes for accurate indication of water
content in the brake fluid in the following levels:
0%, <1%, 2%, 3%,> 4% -> fast and accurate result
Results are easy to read
• Simple and quick measurement of brake fluid performance
• Small and handy -> always at hand
• Robust, with a protective cap for professional use
• TÜV (German Association for Technical Inspection) certified
safety (EN 61010)
• Can be used in car, truck, motorcycle, workshop and service
areas
Delivery amount
• Battery is also included
Article
No.
Article
Designation
PU
Piece
049919 Brake Fluid Tester DOT 4 1
059638 Battery A23 1/10
V1.
7.6.
5/IN
T_P_
MP1
10/3
/12-
08-1
7/#7
2070
7[40
859]
4.32
Electronic measuring instrument
Temperature Scale
Thermo Control
Non contact infra-red temperature measuring unit withlaser pointer
Product advantages
• Handy, practical and applicable in all areas
• Quick and simple surface temperature measurement at the
touch of a button
Properties
Measurement range -18 °C up to +260 °C
Temperature Measurement of
Brakes
Temperature Measurement of
Radiator
Temperature Measurement of Air
Conditioning/Heater
Temperature Measurement of the
Thermostat
Article
No.
Article
Designation
PU
Piece
151417 Thermo Control 1
Scope of supply Amount
010521 E-Block LR 61 battery 1
V1.7.6.5/IN
T_P_
MP110/4/12-08-17/#719361[59485]
4.33
Electronic measuring instrument
Temperature Gauge with K-Type Sensor
Thermo Control with K-Type Sensor
Infrared laser thermometer for connection of a K-TypeThermo Sensor
Product advantages
• Touch-free measuring (via infrared/laser) and contact
measurement (via K-Type sensor) is possible -> multiple uses
• High measuring ranges
• Fast response time -> measuring result rapidly available
• °C/°F switching -> measuring in celsius and fahrenheit
possible
• Engageable laser point with LED torch
• Engageable LCD display lighting
• Value memory for min. and max. values
• Difference value determination (DIF) between highest and
lowest measurement value
• Possible to set continuous measuring
• Possible to set alarm values (HAL and LOW)
• Average determination (AVG) of the temperature
measurement
• Possible to set the emission degree (= energy radiation
characteristics of the material to be measured)
• Automatic switch off after approx. 60 seconds
• Revolver form -> handy
• Compact, stable construction
• TÜV/GS tested (German Association for Technical Inspection
(Safety Tested)
Technical data
Measurement accuracy with touch-free measurement up to
35 ° C: /- 1.0 °C
Measurement accuracy with touch-free measurement from
35 °C -to 500 °C: +/- 2 % or 2 °C
Measurement accuracy with thermo sensor: +/- 1 % or 1 °C
Storage temperature: 0 °C up to 50 °C
Emission value: 0,95 adjustable 0.1 up to 1
Resolution: 0.1 °C
Response time: 1 s
Distance to Spot (DTS=measurement dot size): 12:1
Dimensions: 48.8 x 132.7 x 146.0 mm
Weight: 221.8 g
Properties
Measuring range with touch-free measurement from -60 °C to
+500 °C
Measuring range with optional K-Type sensor from -64 °C to
+1400 °C
Note
• Complies with the requirements of the valid European and
national guidelines EN 60825-1, EN 61001; 6-3:2001, EN
631000; 6-1:2001
Article
No.
Article
Designation
PU
Piece
059055 Thermo Control with K-Type Sensor 1
Scope of supply Amount
010525 Micro Battery LR03 2
K-Type Sensor Measuring Range -50°C to 200°C 1
Nylon Storage Bag 1
V1.
7.6.
5/IN
T_P_
MP1
10/5
/12-
08-1
7/#7
8018
3[61
6275
]
4.34
Mechanical measuring equipment
Quality Measuring Tools for Metal Processing
Scribers
Properties
With hard metal marking-out tops, scribe case mechanics with
aluminium case
Scriber Straight/Bent
Scriber Event Mechanics
Scriber with hard metal clip
Article
No.
Article
Designation
Length
mm
PU
Piece
169083 Scribe Mechanics Case 150 1
169085 Scriber with Carbide Clip 150 1
133398 Scriber steel straight / curved needle-Ø 4 mm 250 1
Accessories available PU
169084 Substitute needle case mechanics 1
Angled Stop
Properties
Zinc coated design
Article
No.
Article
Designation
Length
mm
Width
mm
PU
Piece
133368 Angled Stop 150 100 1
133369 Angled Stop 200 130 1
133371 Angled Stop 300 180 1
Precision Workshop Angle
Properties
Fine sharpened testing surfaces, special steel with stop
square, according to DIN 875/II
Article
No.
Article
Designation
Length
mm
Width
mm
PU
Piece
133365 Precision Workshop Angle 100 70 1
133363 Precision Workshop Angle 150 100 1
133362 Precision Workshop Angle 200 130 1
133359 Precision Workshop Angle 300 175 1
V1.7.6.5/IN
T_P_
MP140/1/11-09-16/#743562[743544]
4.35
Mechanical measuring equipment
Precision-Bevelled Steel Square
Application
• Tests are according to the splitting methods of the light
Properties
Low profile, stainless steel, hardened and finely polished,
according to DIN 875/00
Article
No.
Article
Designation
Length
mm
Width
mm
PU
Piece
133372 Precision-Bevelled Steel Square 100 70 1
Miter Square
Properties
With 135° angle, testing surfaces and fine shaped side
surfaces, with stop, according to DIN 875/II
Article
No.
Article
Designation
Length
mm
Width
mm
PU
Piece
133389 Miter Square 150 100 1
Flange Angle
Application
• Alignment of the flanges
Properties
Galvanized design, testing surfaces and fine sharpened faces
Article
No.
Article
Designation
Length
mm
Width
mm
PU
Piece
133390 Flange Angle 400 400 1
Sliding Steel Bevel
Properties
3 part, with winged nut, zinc coated, plant surfaces and
polished sides, special steel, chrome finish
Article
No.
Article
Designation
Length
mm
PU
Piece
133394 Sliding Steel Bevel 200 1
133395 Sliding Steel Bevel 300 1
V1.
7.6.
5/IN
T_P_
MP1
40/1
/11-
09-1
6/#7
4356
2[74
3544
]
4.36
Mechanical measuring equipment
Precision Protractor
Properties
Measuring range 0° – 180°, line scale with
1° graduation, scale finish in satin chrome,
with locking screw, special steel with chrome finish
Article
No.
Article
Designation
Protractor
mm
Length
mm
PU
Piece
133385 Precision Protractor 120 150 1
133386 Precision Protractor 150 200 1
High-Precision Spring Divider
Properties
With square axle stub, chromed with a quick release nut and
hardened tips.
Article
No.
Article
Designation
Length
mm
PU
Piece
133355 High-Precision Spring Divider 200 1
133356 High-Precision Spring Divider 300 1
Precision Marking Gauges
Properties
Flat design, tempered with mm-graduation, hardened marking-
out edge, matt chrome
stainless steel rail, with vernier reading of 0.10 mm
Article
No.
Article
Designation
Measuring range
mm
PU
Piece
133397 Precision Marking Gauges 200 1
Steel Rules
Properties
Stainless steel, flexible steel, top division 1 / 2 mm, lower edge
1/1 mm, according to DIN ISO 2768m/EG II
Article
No.
Article
Designation
Length
m
PU
Piece
133379 Measuring Rules 0,3 1
133380 Measuring Rules 0,5 1
133381 Measuring Rules 1 1
V1.7.6.5/IN
T_P_
MP140/1/11-09-16/#743562[743544]
4.37
Mechanical measuring equipment
Feeler GaugesApplication
• Measurement of valve clearance, spark gap with spark plugs
Feeler Gauge
With bracket and chain
Properties
With brackets and cast-on plastic handle
Article
No.
Article
Designation
PU
Piece
292656 Feeler Gauge 1
Content Measuring range
mm
Amount
283045 Feeler Gauge 0,05 1
264180 Feeler Gauge 0,08 1
264199 Feeler Gauge 0,1 1
264202 Feeler Gauge 0,15 1
264210 Feeler Gauge 0,2 1
264229 Feeler Gauge 0,25 1
264237 Feeler Gauge 0,3 1
264245 Feeler Gauge 0,35 1
264253 Feeler Gauge 0,4 1
283053 Feeler Gauge 0,45 1
264261 Feeler Gauge 0,5 1
283061 Feeler Gauge 0,6 1
Feeler Gauge Fans
Delivery amount
• Product number 69 868 with 13 sheet gauges:
0.05 - 0.1 - 0.15 to 0.2 - 0.25 - 0.3 -
0.4 to 0.5 - 0.6 - 0.7 to 0.8 - 0.9 - 1.0 mm
• Model 69 850 with 5 sheets of gauges: 0.1 - 0.2 - 0.25 - 0.3 -
0.4 mm
Article
No.
Article
Designation
Measuring
range
mm
PU
Piece
069868 Feeler Gauge 0,05 - 1 1
069850 Feeler Gauge 0,1 - 0,4 1
V1.
7.6.
5/IN
T_P_
MP1
40/2
/12-
08-1
7/#7
8020
4[10
6632
]
4.38
Mechanical measuring equipment
Vernier Caliper
Digital Vernier Caliper
Technical data
Resolution: 0.01 mm
Measuring accuracy: 0.02 mm
Properties
With data output RS 232C, stainless steel, hardened design,
LCD display, "0" setting status is
possible at any position, in accordance with DIN 862
Delivery amount
• Digital vernier caliper in a plastic box
• 1 button cell V76PX (product no. 169448)
Article
No.
Article
Designation
Meßbereich
mm
PU
Piece
169091 Digital Vernier Caliper 150 1
High-Precision Pocket Vernier Caliper
Application
• Interior, exterior, depth and height measurements
Technical data
Measuring jaws: 40 mm
Properties
Stainless steel and hardened, vernier and main part chrome
matt, in accordance with DIN 862
With locking screw
With torque determination
Article
No.
Article
Designation
Measuring
range
mm
Vernier
gauge
mm
PU
Piece
161691 Pocket Vernier Caliper,
with Torque
Determination
150 0,05 1
133376 Pocket Vernier Caliper,
with Locking Screw
150 0,05 1
High-Precision Depth Vernier Caliper
Properties
Caliper with locking screw, stainless steel, hardened and
precision-ground, according to DIN 861
Article
No.
Article
Designation
Measuring
range
mm
Vernier
caliper
mm
PU
Piece
133375 High-Precision Depth
Vernier Caliper
200 0,05 1 V1.7.6.5/IN
T_P_
MP140/3/12-08-17/#743515[83711]
4.39
Mechanical measuring equipment
Workshop Venier Calipers
Properties
Stainless hardened steel, with locking screw, chromed scale
and vernier, in accordance with DIN 862
Delivery amount
• Workshop caliper
• Wooden box
Article
No.
Article
Designation
Measuring
range
mm
Vernier
gauge
mm
PU
Piece
133373 Workshop Venier Calipers 300 0,05 1
Vernier Calipers for Brake Disks
Application
• Used for measuring the thickness of brake disks whilst being
installed
Technical data
Measuring of side length: 80 mm
Total length: 215 mm
Article
No.
Article
Designation
Measuring
range
mm
Vernier
gauge
mm
PU
Piece
006656 Vernier Caliper for Brake
Disk
60 0,1 1
Calipers for Brake Drums
Technical data
Vernier caliper length: 150 mm
Internal measuring range: 50 – 500 mm
External measuring range: 0 – 500 mm
Article
No.
Article
Designation
Measuring
range
mm
PU
Piece
141685 Calipers for Brake Drums 500 1
Exterior Micrometer
Technical data
Thread pitch: 0.5 mm
Reading meter drum: Ø 18 mm
Reading meter: 0.01 mm
Properties
Measuring drum and hull dull chromium-plated, measuring
surfaces, fitted with hard metal , in accordance with DIN 86
Delivery amount
• Wooden box
Article
No.
Article
Designation
Measuring range
mm
PU
Piece
126896 Exterior Micrometer 0 - 25 1
133374 Exterior Micrometer 25 - 50 1
V1.
7.6.
5/IN
T_P_
MP1
40/3
/12-
08-1
7/#7
4351
5[83
711]
4.40
Miscellaneous
Funnel
Tinplate Funnel
Application
• Used in industry and workshops
Product advantages
• Oil-, gasoline- and acid-proof
• Flexible metal outlet with thread
• Replaceable, fine screens made of brass
• High overflow rim serves as splash protection
Technical data
Material: tinplate
Length of outlet pipe: 300 mm
Discharge-Ø: 18 mm
Article
No.
Article
Designation
Funnel-Ø
mm
Capacity l PU
Piece
141649 Funnel 160 1,2 1
141650 Funnel 200 3,2 1
Plastic Funnel Straight
Product advantages
• Break-safe polyethylene
• Oil-, gasoline- and chemicals-resistant
• High overflow rim serves as splash protection
Article
No.
Article
Designation
Funnel-Ø
mm
PU
Piece
741523 Funnel 100 1
741531 Funnel 200 1
Plastic Funnel Angled
Product advantages
• Break-safe polyethylene
• Oil-, gasoline- and chemicals-resistant
• High overflow rim serves as splash protection
Article
No.
Article
Designation
Funnel-Ø
mm
Capacity l PU
Piece
141651 Funnel 160 1,3 1
V1.7.6.5/IN
T_P_
MP150/1/12-08-17/#780223[38455]
4.41
Miscellaneous
Refilling- / Metering Containers
Refill Bottle
Application
• Refilling battery water
Product advantages
• Clean — no leakage hanks to pressure cap
Properties
Stable plastic design with handle
Article
No.
Article
Designation
Bottle
Capacity l
PU
Piece
145893 Battery Water Refilling Bottle 2,0 1
Spares PU
149935 Spout for refill bottle 1
Workshop Oil Cup
Product advantages
• Polyethylene containers
• Double brass pump
• Spray aluminum tube, length: 165 mm
Article
No.
Article
Designation
Capacity l PU
Piece
099982 Workshop Oil Cup with Double Oil Pump 0,3 1
Oil Can
Properties
Metal
Article
No.
Article
Designation
Capacity l PU
Piece
069949 Metal Oil Can 0,25 1
Oiler
Properties
Plastic
Article
No.
Article
Designation
Capacity l PU
Piece
069957 Plastic Design 0,16 1
V1.
7.6.
5/IN
T_P_
MP1
50/2
/12-
08-1
7/#7
8022
8[38
519]
4.42
Miscellaneous
Marking Tools and Accessories
Marking and Labeling Set ProfessionalMarker
Application
• Marking of practically any material, dry or wet
• Graphite lead: wood, paper, cardboard
• Wax lead: metal, plastic, glass, brick, tile, rubber, ceramics,
concrete
Product advantages
• Handy size, fits in a shirt pocket and is always
readily at hand
• Extremely robust: the 5 mm lead of the pen does not break,
even when being dropped
• No-smeared hands, as lead is optimally positiioned and can
be adjusted at the push of a button
• Wax leads practically insoluble in water but markings can be
removed through wiping
Delivery amount
• Set: 2 marking pens, 5 graphite leads, 5 yellow wax leads
and 5 red wax leads
Article
No.
Article
Designation
PU
Piece
017343 Marking and Labeling Set Professional Marker 1
Accessories available PU
023296 Graphite Lead Set (5 pieces) 1
023295 Wax Lead Set (5 pieces), yellow 1
023294 Wax Lead Set (5 pieces), red 1
028911 Professional Marker Pencil 1
V1.7.6.5/IN
T_P_
MP150/3/12-08-17/#780234[59320]
4.43
Miscellaneous
Marking Chalk
Application
• Marks metal, stone, concrete, wood and cardboard
Properties
Available in 4 colors, heat resistant, 11 cm long lead, practical
case holder with mechanics
Note
• Can be washed out of textiles with water
Article
No.
Article
Designation
Color PU
Piece
082495 Marking Chalk white 12
082599 Marking Chalk yellow 12
082644 Marking Chalk blue 12
082735 Marking Chalk red 12
Accessories available PU
083871 Holder for Marking Chalk 1
Carpenter Pencil
Properties
Handy pencil with hard, flat lead
V1.
7.6.
5/IN
T_P_
MP1
50/3
/12-
08-1
7/#7
8023
4[59
320]
4.44
Miscellaneous
Calibrated Vessel
Measuring Cup 1
Properties
Break resistant, oil- and acid-proof;, blue grounded ml scale
division, handle and spout
Note
• Graduated scale in 50 ml or 100 ml increments
Article
No.
Article
Designation
Capacity PU
Piece
741469 Measuring Cup 1,0 1
741477 Measuring Cup 2,0 1
741485 Measuring Cup 3,0 1
099793 Measuring Cup 5,0 1
Measuring Cup 2
Properties
Tin plate, oil- and acid-proof, available with flexible spout or
funnel outlet
Article
No.
Article
Designation
Capacity I PU
Piece
141646 Measuring Cup 0,5 1
141647 Measuring Cup 1,0 1
141648 Measuring Cup 2,0 1
Measuring Cup 3
Properties
Tin plate, oil- and acid-proof, available with flexible spout or
funnel outlet
Article
No.
Article
Designation
Capacity
l
PU
Piece
141644 Measuring Cup 1,0 1
141645 Measuring Cup 2,0 1
V1.7.6.5/IN
T_P_
MP150/4/12-08-17/#780216[38441]
4.45
Miscellaneous
Measuring Cup
Properties
Break-resistant, oil- and gasoline-proof, scale-division, funnel-
shaped spout with flexible spout hose
Note
• Scale divisions in 250 mm or 500 mm increments
Article
No.
Article
Designation
Capacity I PU
Piece
741493 Measuring Cup 1,0 1
741507 Measuring Cup 2,0 1
741515 Measuring Cup 3,0 1
Measuring Cup
Properties
Tin-plated, funnel outlet, only for oil, diesel, waste oil
Note
• Not suitable for liquids with a flash point below 55 ° C water-
corroding liquids (antifreeze)
Article
No.
Article
Designation
Capacity
l
PU
Piece
141652 Measuring Cup 5,0 1
141653 Measuring Cup 10,0 1
Plastic Measuring Bucket
Properties
Plastic PE (polyethylene), white, with stamped internal scaling,
with handle
Article
No.
Article
Designation
Capacity
l
PU
Piece
099792 Plastic Measuring Bucket 10,0
Colored Measuring Cup
Properties
With measuring scale, made of unbreakable plastic, stable
Article
No.
Article
Designation
Capacity l PU
Piece
170735 Colored Measuring Cup 0,4 100
117798 Colored Measuring Cup 1,3 100
119859 Colored Measuring Cup 2,2 100
V1.
7.6.
5/IN
T_P_
MP1
50/4
/12-
08-1
7/#7
8021
6[38
441]
4.46
top related