department of mechanical engineering - g h … · secondprize rs.15000/ techkriti -2013 and ......
Post on 26-May-2018
218 Views
Preview:
TRANSCRIPT
G. H. RAISONI COLLEGE OF ENGINEERING (An autonomous Institute under UGC act1956& Affiliated to RTM Nagpur University)
CRPF Gate No. 3, Hingna Road, Digdoh, Nagpur-440016
DEPARTMENT OF MECHANICAL ENGINEERING
Dr. P.V.Walke Dr. D. J. Tidke Head of Department Faculty Advisor
Members
Prof. N. P. Awate Prof. A.D. Pitale Prof. P.M.Wanjari Incharge-Dept News Letter
Editor (Students)
Mr. Pranit Gadgil Mr.Akshay Shelgaonkar Mr Ganesh Shinde
Year-03 Volume: 03 March -2014
Our Vision
To be recognized internationally for quality
education and research in mechanical
engineering with excellence in the fields of
design, manufacturing and thermal sciences.
Our Mission
To prepare professionally competent and
broadly educated mechanical engineers by
developing analytical and research abilities,
encouraging culture of continuous learning and
by adopting new technologies to solve complex
problems.
Programme Educational Objectives of
Department (PEOs)
The educational objectives of the Mechanical
Engineering programme are designed to
produce competent engineers who are ready to
contribute effectively to the advancement of
Mechanical Engineering causes and to
accommodate the needs of the profession. The
Mechanical Engineering Department is
dedicated to graduating mechanical engineers
who:
1. Shall practice Mechanical Engineering in the
general disciplines of design, thermal and
manufacturing engineering in industry and
establishments in government and private
sectors.
G. H. RAISONI COLLEGE OF ENGINEERING (An autonomous Institute under UGC act1956& Affiliated to RTM Nagpur University)
CRPF Gate No. 3, Hingna Road, Digdoh, Nagpur-440016
2. Shall apply fundamental technical knowledge
and skills to find workable solutions to
technological challenges and problems in
various areas of Mechanical Engineering.
3. Shall pursue advanced education, research
and development, and other creative
efforts in science and technology.
4. Shall conduct themselves in a responsible,
professional and ethical manner for the
benefit of the industry and society.
Programme Outcomes (POs)
The programme is targeted at developing the
following competencies, skills and abilities
amongst students. They shall be able to:
1. Acquire knowledge in the discipline of
mechanical engineering, apply
fundamentals of mathematics,
engineering and sciences and apply
technologies to solve complex problems
in inter and cross disciplinary areas.
2. Search out relevant technical
information, use analytical tools to
formulate problems and identify
workable solutions.
3. Design mechanical systems,
components, or processes to meet their
performance needs from considerations
of public health and safety as well as
cultural, societal, and environmental
issues.
4. Engage in R & D pursuits, set up and
conduct experiments, analyze and
interprete data using tools, techniques
and instrumentation in mechanical
engineering and interdisciplinary area.
5. Identify, formulate and solve mechanical
engineering problems using modern
design and manufacturing approaches
and computational and software tools.
6. Understand the responsibilities
associated with the use of technology &
processes on societal & legal issues of
concern in respect of health, safety and
culture.
7. Understand contemporary issues in
sustainable development and in
providing technology solutions
considering impact of economic, social,
political, environmental and global
issues.
8. Understand ethical and professional
issues and responsibilities in engineering
practice, creative enterprise, loyalty and
commitment.
9. Communicate effectively in written, oral
and graphical forms, provide
instructions and present the results in a
professional manner.
10. Possess knowledge of management
principles, project management and
finance, engineering materials, processes
and systems working to function
effectively, as a member or team leader,
in executing mechanical engineering
projects under diverse and
multidisciplinary environments.
11. Develop ability to engage in lifelong
learning, adapt new developments and
participate in continuing education
opportunities to remain active in the
profession and foster personal and
organizational growth.
G. H. RAISONI COLLEGE OF ENGINEERING (An autonomous Institute under UGC act1956& Affiliated to RTM Nagpur University)
CRPF Gate No. 3, Hingna Road, Digdoh, Nagpur-440016
Mechanical Engineering students got
third Prize in IMP -2014, at IIT Kanpur
Department of Mechanical engineering
student ‘s are demonstrate there project at
IIT Kanpur organized Project Competition
IMP- 2014
The students of Mechanical Engineering,
GHRCE Nagpur have participated in
prestigious event Innovation in Manufacturing
Practices IMP -2014 National Level
Innovative project Design Competition at
Indian Institute of Technology Kanpur in
association with Indian National Academy of
Engineer on 4th to 7 th March 2014 ,
Student of Mechanical Engineering Department
are demonstrate there develop machine . titled
“Design and Development castor seed
extraction Machine ” This machine is
developed by final year student Mr. Nitin
Galanede, Mr. Palash Madamwar . Mr. Swapnil
Malapure and Mr. Swapnil Chaudhary under the
guidance of Prof. Nilesh Awate, Assistant
Professor , Department of Mechanical
Engineering ,
In this innovative project competition all over
india top six project was selected for final
presentation at IIT Kanpur . The student of
GHRCE can represent there project with other
top five colleges IIT Kanpur , IIT Delhi, NIT
Jaipur, VIT Chennai , KVIT Tamilnadu. in this
completion. GHRCE got Third Prize of Cash
Rs.25000/- in this completion
Prof. Indranil Manna , Director IIT Kanpur ,
Chairperson, Evaluation Committee Vice
President INAE and other dignitaries are
appreciated the GHRCE student for developing
such kind of machine for the rural development
and reduce the tedious work of seed removal
process. .
GHRCE Project did hatric at IIT Kanpur,
won First Prize Rs.25000/ in Techkriti-2012,
SecondPrize Rs.15000/ Techkriti -2013 and
Third Prize Rs. 25000/- Techkriti- -2014 at IIT
Kanpur
Students from final year Mechanical
Engineering, have given credit of success to
G. H. RAISONI COLLEGE OF ENGINEERING (An autonomous Institute under UGC act1956& Affiliated to RTM Nagpur University)
CRPF Gate No. 3, Hingna Road, Digdoh, Nagpur-440016
Hon’ble Dr. P. R. Bajaj , Director, GHRCE ,
and Dr. P. V. Walke Head of Department,
Mechanical Engineering , and Prof. K.D. Joshi,
Coordinator IIP Cell GHRCE Nagpur.
Mechanical Engineering Team AXIOM
participated SAE INDA BAJA-2014 at
NATRAX , NATRiP , Prithampur .
Department of Mechanical engineering student ‘s are demonstrate there ATV at SAE INDIA BAJA-2014, Prithampur ,
The students of Mechanical Engineering,
GHRCE Nagpur have participated in
prestigious India’s Biggest ATV Event BAJA -
2014 National Level Off road Car making
(ATV making ) Competition at NATRiP
Prithampur , Indore, Madhya Pradesh INDIA
.This competition was organized by SAE
INDIA in association with Mahindra and
Mahindra.
Students of Mechanical Engineering
Department demonstrated their developed
Car in this competition. SAE Collegiate Club
GHRCE Nagpur ,Team AXIOM participate
with 25 Member team in SAE INDIA
organized BAJA-2014 at NaTRAX facility
National Automotive Testing and R&D
Infrastructure Project ( NATRiP) At
Prithampur Dist Indore. M. P Sate . In This
team consists Mr. N.P.Awate, Faculty Advisor
SAE Collegiate Club GHRCE Nagpur , and
Prof. A.D, Pitale, Additional Faculty Advisor,
SAE Collegiate Club GHRCE Nagpur along
with 24 students of Final year and third year
was participated in this event . The car was
built under the guidance of Prof. Nilesh Awate,
Faculty Advisor, SAE Collegiate Club GHRCE
Nagpur Department of Mechanical Engineering
.In this competition in BAJA aptitude test (
BAT) 5 student of GHRCE were shortlisted
in reputed company for HR and PI round
General motor, Cummins, Endurance, and
Mahindra and Mahindra . Mr. Ravindra
Pardeshi student of final year mechanical
engineering was finally selected in Cummins
India PVT.LTD as Associate Engineer in HR
meet held on 25 Feb2014. For Development of
this project college provide finical support to
team AXIOM of Rs.4,30, 000/-
Team member of Team AXIOM GHRCE
Nagpur and SAE Collegiate Club GHRCE
Nagpur, have given credit of success to
represent GHRCE car in this mega event to
Hon’ble Dr. P. R. Bajaj , Director, GHRCE ,
and Dr. P. V. Walke Head of Department,
Mechanical Engineering , and Prof. K.D. Joshi,
Coordinator IIP Cell GHRCE Nagpur.
G. H. RAISONI COLLEGE OF ENGINEERING (An autonomous Institute under UGC act1956& Affiliated to RTM Nagpur University)
CRPF Gate No. 3, Hingna Road, Digdoh, Nagpur-440016
One Day Workshop on “Manufacturing
Technologies in Solar Photo-Voltaic and
Gadgets Powered By Solar”
One day workshop on “Manufacturing
technologies in solar Photo-Voltaic and gadgets
powered by solar” was organized by Mechanical
Engineering department at G H Raisoni college
of Engineering, Nagpur under the aegis of Solar
Energy Society of India (SESI) on 20 March
2014. Mr.Mukesh Kartare, and Mr.Mehul Patel
faculty from ENELEK Power Private Limited,
Mumbai, conducted a workshop. Scope of
workshop includes the theoretical and practical
concept of solar related gadgets and the
demonstration of solar equipment. Workshop
was beneficial for Mechanical Engineering
students to understand the theoretical and
practical concept of solar energy. They have
explained many important topics related to
renewable energy in their talk. Information
provided to the students is also useful for
pursuing their further research in this upcoming
area. Experts had interaction session with the
students and have given valuable guidelines to
students about recent trends available in this
technology. 120 students of fourth and sixth
semester BE and second semester
M.Tech(HPE) were participated in the event .
Project Review Seminar of M.Tech (HPE)
conducted by External Expert in Mech.
Engg. Dept., GHRCE, Nagpur on 20March
2014
G. H. RAISONI COLLEGE OF ENGINEERING (An autonomous Institute under UGC act1956& Affiliated to RTM Nagpur University)
CRPF Gate No. 3, Hingna Road, Digdoh, Nagpur-440016
The department of Mechanical Engineering of
G.H.Raisoni College of Engineering, Nagpur
was conducted External Project Review Seminar
for M.Tech (Heat Power Engineering) on 20
March 2014. DR. S.B.Thombre, Professor and
Head (Mechanical Engineering), VNIT,Nagpur,
was invited as a Expert..Dr. P.V.Walke, HOD,
Mechanical Engineering, Dr.V.M.Kriplani
Professor.MechanicalEngineering,Dr.U.S.Wank
hede Dean R&D, Prof R.S.Shelke, Prof.
S.R.Karale ,Prof. A.D.Pitale were also present
for review seminar. Prof. V.W.Khond, was
coordinated activity. 17 M.Tech IV semester
(HPE) students were presented their
seminar.
Mechanical Engineering Department of
GHRCE organized 9th Board of Studies
Meet on 13th February, 2014.
To revise and finalize the new scheme for post
graduate studies and to discuss the content of
the revised syllabi, BOS Meet (9th BOS Meet)
was organized by the Department of Mechanical
Engineering, GHRCE on 13th February, 2014.
Dr.P.V.Walke HOD and chairman of BOS
welcomed the guest to the august house and
handed over the session to Dr. V.M.Kriplani.
Outside expert and academician Dr.D.V.Bhope
Chairman, BOS, Mechanical Engineering,
RTMNU, Nagpur, Industry expert Mr.Vivek
Vaidya Sr. Manager JSW-Ispat , Mr. Shrekhar
Jogwar Manager (Manufacturing) PIX
Transmission Ltd. were actively involved in this
meet. All internal experts were also present in
this meet.
Dr.P.V.Walke HOD and chairman of BOS
proposed formal vote of thanks at the end of
the programme.
Industry Advisory Committee Meet
conducted on Monday, 10th February, 2014 in
Mechanical Engineering Department
Dr. P. V. Walke, Professor & Head, Department of Mechanical Engineering, presided over the meeting which was attended by the faculty members of the Department and the following
G. H. RAISONI COLLEGE OF ENGINEERING (An autonomous Institute under UGC act1956& Affiliated to RTM Nagpur University)
CRPF Gate No. 3, Hingna Road, Digdoh, Nagpur-440016
esteemed industry executives were present for meeting
1. Mr Nitin Sudame, Executive Director, Spacewood Furnishers Pvt. Ltd, Nagpur
2. Mr Hemant Jawade, Managing Director, Anand Projects & Consultancy Services Limited, Nagpur
3. Mr. J. K. Wadhwan,,Managing Director, Epsillon Cables Pvt. Limited, Nagpur
4. Mr. Hemant Ambaselkar, President, Butibori Industries Association, Nagpur
5. Mr. Uday Kamat, Managing Director, Yash Agro Energy Limited, Nagpur
6. Mr. Gautam Mohanty, Assistant General Manager (Works), NECO Heavy Engg. & Castings Limited, Nagpur
Dr. D.J. Tidke proposed a formal vote of thanks. Guest Lecture organized for the students of
IInd Sem M. Tech. CAD/CAM and VIth sem
Mechanical Engineering
Mr. K. Pravin Kumar delivering guest
lecture to the students
Department of Mechanical Engineering has
organized the guest lecture on “Recent trends in
CAD/CAM” on Monday 10/03/2014 for the
students of M Tech CAD/CAM and VIth Semester
of the department. The lecture was delivered by Mr.
K. Pravin Kumar, CAE Engineer, Geometrics
Technologies Pvt. Ltd. and Nilesh Bhagat, Project
Head, Geometrics Technologies Pvt. Ltd.
Nagpur.About 60 students from VIth semester and
15 students from M. Tech. CAD/CAM attended the
lecture. He mainly focused on the product
development and the various stages involved in it.
He guided the students about the market
opportunities in CAD/CAM/CAE and discussed
that how the softwares are useful for their final year
major project.
The credit for organizing the guest lecture
goes to Dr. P. V. Walke, HoD Department of
Mechanical Engineering, Prof. Laukik Raut,
Assistant Professor, Prof. S. G. Borkar, , Assistant
Professor Department of Mechanical Engineering.
Paper Publish by Faculty
Title of paper: A Review of Various
Techniques Used for Shaft Failure Analysis
Name of Author:
Sumit P. Raut, Research Scholar, Department of
Mechanical Engineering,G. H. Raisoni College
of Engineering, Nagpur, India
Laukik P. Raut, Assistant Professor, Department
of Mechanical Engineering,G. H. Raisoni
College of Engineering, Nagpur, India
International Journal Details: International Journal of Engineering Research and General Science Volume 2, Issue 2, Feb-Mar 2014 ISSN 2091-2730
G. H. RAISONI COLLEGE OF ENGINEERING (An autonomous Institute under UGC act1956& Affiliated to RTM Nagpur University)
CRPF Gate No. 3, Hingna Road, Digdoh, Nagpur-440016
top related