define: polar, nonpolar, dipole-dipole forces, ion-dipole forces, hydrogen “bonding”, and london...
Post on 23-Dec-2015
255 Views
Preview:
TRANSCRIPT
•Define: polar, nonpolar, dipole-dipole forces, ion-dipole forces, Hydrogen “bonding”, and London dispersion forces; sublimation, condensation, evaporation, freezing point, boiling point, vapor pressure, viscosity, surface tension, delta H of fusion, vaporization , and sublimation.
•Distinguish between intermolecular and intramolecular attractions
•Put a list of compounds in order of increasing melting point, boiling point, and vapor pressure
•Use and label the parts of a phase diagram
•Understand the expansion of ice due to hydrogen bonding
•Use the Clausius-Clapeyron equation
Three factors determine whether a substance is a solid, a liquid, or a gas: 1.The attractive intermolecular forces between particles that tend to draw the particles together. 2.Temperature: The kinetic energies of the particles (atoms, molecules, or ions) that make up a substance. Kinetic energy tends to keep the particles moving apart. 3.Pressure: pressure is increased or decreased as the volume of a closed container changes
Solid, Liquid, or GasSolid, Liquid, or Gas
There are several types of attractive intermolecular forces:
1.Hydrogen bonding2.Dipole-dipole forces 3.Induced-dipole forces4.London dispersion forces
Types of Attractive Forces
All of the intermolecular forces that hold a liquid together are called cohesive forces.
Hydrogen BondingBonding between hydrogen and more electronegative neighboring atoms such as oxygen and nitrogen
Hydrogen bonding between ammonia and water
Hydrogen Bonding in DNA
N O
OH
OP
O
OH
OHN
N
NNH2
NO
OH
OP
O
OH
OH
NH
O
O
CH3
TT AA
Thymine hydrogen bonds to Adenine
Hydrogen Bonding in DNA
CC GG
NO
OH
OP
O
OH
OH
N
NH2
O
N O
OH
OP
O
OH
OHN
NH
N
NH2
O
Cytosine hydrogen bonds to Guanine
•Dipole-dipole forces are attractive forces between the positive end of one polar molecule and the negative end of another polar molecule.
•They are much weaker than ionic or covalent bonds and have a significant effect only when the molecules involved are close together (touching or almost touching).
Dipole-Dipole Forces
An ion-dipole force is an attractive force that results from the electrostatic attraction between an ion and a neutral molecule that has a dipole.
•Most commonly found in solutions. Especially important for solutions of ionic compounds in polar liquids. •Ion-dipole attractions become stronger as either the charge on the ion increases, or as the magnitude of the dipole of the polar molecule increases.
Ion-Dipole Forces
Induced dipole forces result when an ion or a dipole induces a dipole in an atom or a molecule with no dipole. These are weak forces.
Induced-Dipole Forces
Ion-Induced Dipole Forces
An ion-induced dipole attraction is a weak attraction that results when the approach of an ion induces a dipole in an atom or in a nonpolar molecule by disturbing the arrangement of electrons in the nonpolar species.
A dipole-induced dipole attraction is a weak attraction that results when a polar molecule induces a dipole in an atom or in a nonpolar molecule by disturbing the arrangement of electrons in the nonpolar species.
Dipole-Induced Dipole Forces
London Dispersion Forces
The temporary The temporary separations of charge separations of charge that lead to the London that lead to the London force attractions are force attractions are what attract one what attract one nonpolarnonpolar molecule to its molecule to its neighbors.neighbors.
Fritz London Fritz London 1900-19541900-1954
London forces increase London forces increase with the size of the with the size of the molecules.molecules.
London Dispersion Forces
London Forces in Hydrocarbons
Boiling point as a measure of intermolecular attractive forces
Relative Magnitudes of Forces
The types of bonding forces vary in The types of bonding forces vary in their strength as measured by their strength as measured by average bond energy. average bond energy.
Hydrogen bonding (12-16 kcal/mol )Dipole-dipole interactions (2-0.5 kcal/mol)
London forces (less than 1 kcal/mol)
Strongest
Weakest
Ion-dipole interactions
Ionic bonds
Ion induced dipole interactions
Induced Dipole-dipole interactions
Intermolecular QuizIdentify the most predominant intermolecular force in
the following molecules:
1) CF2Cl2
2) CaCl2
3) C6H12O6
4) PCl5
5) Na+ in H2O
6) Cl- in hexane (C6H14)
1) Dipole-Dipole
2) Ionic
3) Hydrogen Bonding
4) London Dispersion
5) Ion-dipole
6) Ion-induced Dipole
Intermolecular QuizDetermine which of the pairs of molecules would have the:
1) Highest Boiling Pointa) CF2Cl2 or H2O
b) SO3 or SO2
2) Highest Vapor Pressurea) KCl or HCl
b) H2O or C6H12O6
This bottle contains both liquid bromine [Br2(l), the darker phase at the bottom of the bottle] and gaseous bromine [Br2(g), the lighter phase above the liquid]. The circles show microscopic views of both liquid bromine and gaseous bromine.
A liquid is a state of matter in which a sample of matter:•is made up of very small particles (atoms, molecules, and/or ions). •flows and can change its shape. •is not easily compressible and maintains a relatively fixed volume.
The particles that make up a liquid: •are close together with no regular arrangement, •vibrate, move about, and slide past each other.
What Is a Liquid?
More Properties of a Liquid
Surface Tension: The resistance to an increase in its surface area (polar molecules, liquid metals).
Capillary Action: Spontaneous rising of a liquid in a narrow tube.
Even More Properties of a Liquid
Viscosity: Resistance to flow
High viscosityHigh viscosity is is an an
indication of indication of strong strong
intermolecularintermolecular forces forces
Microscopic view of a liquid.
Microscopic view after evaporation.
When a liquid is heated sufficiently or when the pressure on the liquid is decreased sufficiently, the forces of attraction between molecules do not prevent them from moving apart, and the liquid evaporates to a gas.
•Example: The sweat on the outside of a cold glass evaporates when the glass warms. •Example: Gaseous carbon dioxide is produced when the valve on a CO2 fire extinguisher is opened and the pressure is reduced.
EvaporationEvaporation is the change of a liquid to a gas.
•When a solid or a liquid evaporates to a gas in a closed container, the molecules cannot escape. •Some of the gas molecules will eventually strike the condensed phase and condense back into it. •When the rate of condensation of the gas becomes equal to the rate of evaporation of the liquid or solid, the amount of gas, liquid and/or solid no longer changes. •The gas in the container is in equilibrium with the liquid or solid.
Vapor Pressure Revealed
•Types of Molecules: the types of molecules that make up a solid or liquid determine its vapor pressure. If the intermolecular forces between molecules are:
Factors That Affect Vapor Pressure
substancevapor
pressure at 25oC
diethyl ether 0.7 atm
bromine 0.3 atm
ethyl alcohol 0.08 atm
water 0.03 atm•Surface Area: the surface area of the solid or liquid in contact with the gas has no effect on the vapor pressure.
The vapor pressure of a liquid is the equilibrium pressure of a vapor above its liquid (or solid)The vapor pressure of a liquid varies with its temperature, as the following graph shows for water. The line on the graph shows the boiling temperature for water.
Vapor Pressure
As the temperature of a liquid or solid increases its vapor pressure also increases. Conversely, vapor pressure decreases as the temperature decreases.
Temperature Dependence of Vapor Pressures
• The vapor pressure above the liquid varies exponentially with changes in the temperature.
• The Clausius-Clapeyron equation shows how the vapor pressure and temperature are related. It can be written as:
CTR
HP vap
1ln
Clausius – Clapeyron Equation
• A straight line plot results when ln P vs. 1/T is plotted and has a slope of Hvap/R.
• Clausius – Clapeyron equation is true for any two pairs of points.
122@
1@ 11ln
TTR
H
P
P vap
Tvap
Tvap
CTR
HP vapvap
1ln
Write the equation for each and combine to get:
Using the Clausius – Clapeyron Equation
• Boiling point - the temperature at which the vapor pressure of a liquid is equal to the pressure of the external atmosphere.
• Normal boiling point - the temperature at which the vapor pressure of a liquid is equal to atmospheric pressure (1 atm).
E.g. Determine normal boiling point of chloroform if its heat of vaporization is 31.4 kJ/mol and it has a vapor pressure of 190.0 mmHg at 25.0°C.E.g.2. The normal boiling point of benzene is 80.1°C; at 26.1°C it has a vapor pressure of 100.0 mmHg. What is the heat of vaporization?
335 K
33.0 kJ/mol
Solids
Types of Solids
Amorphous solids: considerable disorder in their structures (glass).
Types of Solids
Crystalline Solids: highly regular arrangement of their components
Metal Alloys
Substitutional Alloy: some metal atoms replaced by others of similar size.
• brass = Cu/Zn
Metal Alloys(continued)
Interstitial Alloy: Interstices (holes) in closest packed metal structure are occupied by small atoms.
• steel = iron + carbon
Network Atomic Solids
Some covalently bonded substances DO NOT form discrete molecules.
Diamond, a network of covalently bonded carbon atoms
Graphite, a network of covalently bonded carbon atoms
Molecular Solids
Strong covalent forces within molecules
Weak covalent forces between molecules
Sulfur, SSulfur, S88 Phosphorus, PPhosphorus, P44
Using the Clausius – Clapeyron Equation
• Boiling point - the temperature at which the vapor pressure of a liquid is equal to the pressure of the external atmosphere.
• Normal boiling point - the temperature at which the vapor pressure of a liquid is equal to atmospheric pressure (1 atm).
E.g. Determine normal boiling point of chloroform if its heat of vaporization is 31.4 kJ/mol and it has a vapor pressure of 190.0 mmHg at 25.0°C.E.g.2. The normal boiling point of benzene is 80.1°C; at 51.3°C it has a vapor pressure of 280.0 mmHg. What is the heat of vaporization?
335 K
33.0 kJ/mol
Phase Diagrams
• Triple point- Temp. and press. where all three phases co-exist in equilibrium.
• Critical temp.- Temp. where substance must always be gas, no matter what pressure.
• Critical pressure- vapor pressure at critical temp.
• Critical point- point where system is at its critical pressure and temp.
Water
Carbon dioxide
Carbon
Sulfur
Phase Transitions• Melting: change of a solid to a
liquid.• Freezing: change a liquid to a
solid.• Vaporization: change of a liquid
to a gas. • Condensation: change of a gas to
a liquid. • Sublimation : Change of solid to
gas• Deposition: Change of a gas to a
solid.
H2O(s) H2O(l)
H2O(l) H2O(s)
H2O(l) H2O(g)
H2O(g) H2O(l)
H2O(s) H2O(g)
H2O(g) H2O(s)
Phase changes by Name
Water phase changes
Temperature remains constant during a phase change.
Energy
Energy of Heat and Phase Change
• Heat of vaporization: heat needed for the vaporization of a liquid.
H2O(l) H2O(g) H = 40.7 kJ• Heat of fusion: heat needed for
the melting of a solid.
H2O(s) H2O(l) H = 6.02 kJ• Temperature does not change
during the change from one phase to another.
E.g. Start with 100.0 g of H2O(s) at -10°C. Determine the heat required to heat this to 110.0°C. The specific heat of liquid water is 4.184 J/g °C, ice is 2.090 J/g °C, and steam is 2.010 J/g K . The molar heat of vaporization is 40.7 kJ/mol. The molar heat of fusion is 6.02 kJ/mol.
E.g. Start with a mixture consisting of 50.0 g of H2O(s) and 50.0 g of H2O(l) at 0°C. Determine the heat required to heat this mixture to 100.0°C and evaporate half of the water.
Try These!
top related