dasal xicato presentation 2011

Introduction

Located just outside of Vancouver BC, product design, testing, production, powder coating & innovations are all done within our 31,000 sq ft facility. Our specification-grade architectural lighting products have matured over the years to now include a multitude of Downlights, Recessed Multiples, Pendant Multiples, Architectural Cylinders and an ever expanding array of LED products.

   With pride & passion, Dasal continues to evolve by closely studying and thoroughly understanding how technology is shaping the future of lighting. Coupling our knowledge with our passion to make it better, along with input from our discerning clients, we continue exceeding industry standards to ensure years of reliability and performance in all that we do.

   A constant force behind all Dasal product is our team of dedicated professionals. A culture enriched with creativity, intelligent customer service, quality control, plus a never ending quest to exceed expectations, are the spirit of our team

ColorConsistency

ColorConsistency

ColorConsistency

LEDAdvancements

Thermal Management Flux &

Beam Control

Cost vs Payback

Technology Life Cycle – When to jump in

Tackling the challenges

ColorConsisten

cy

Flux & Beam Control

???

Ellipse is defined as the ability to see

Change in color

David MacAdam

Knowing that……

How does one effectively use LED’s?

Single Point LED’s

• Visually Appealing

• Optically easier to control

Vela & Draco luminaires

Ultra Compact Series

• Smaller Luminaire

• Easier to Thermally manage

Multi Point LED’s as Downlights ?

• Collimator approach can cause multiple

shadows

• Visually Unappealing

• LED’s from multiple bins resulting in various color temperatures from LED to LED

• Using phosphor converted white LEDs necessitates usage of individual collimators over each LED and a dedicated design

• If the LED count decreases because of increasing LED efficiency then a new optical design will be necessary for the luminaire. It is not “future proof”.

..If multi Point LED’s are not the answer for Higher Lumen output downlights, what is……..?

Introducing the Xicato Spot Module

Cold PhosphorMaximizing Robust Life

“Cold Phosphor Technology” results in higher efficacies and lifetime of both LED and phosphor

o Reduces heat due to photon recycling 360o heat conduction

o All surfaces thermally coupledo Heat conduction from top and bottom of

device Results in a uniquely miniaturised module

with relatively low heat sinking demands

360o thermal Path

700ma Heat Sink

The design of the Xicato Spot Module tackles these challenges and results in a lighting solution without compromises

Patent pending internal optical mixing cavity (allowing reduction of LED count over time)

Patent pending thermal design

Patent pending “Cold Phosphor Technology”

Ability to use full distribution of production LEDs while maintaining consistent color and flux performance (product – product and over temperature and lifetime)

Remember this ?

LM – 80 Test Data – Lumen Depreciation6000 hrs @ 85oC Case Temperature

Xicato < 2% after 6k hours

Industry Standard

Color Maintenance

• Each set of points represents a different module under test. • Multiple data points represent different HTOL test time intervals

• Color Maintenance after 5Khours• LM-80 test 85o C• 4000K and 2700K similar

3000K

4 MacAdam Ellipse

Xicato Color Specification

• Corrected Cold Phosphor Technology• Color Stability with Phosphor off Chip• Better Thermal = Better Color Stability

The Red Cliff • Red phosphor

degradation w/ heat

• 80o C (176o F)Tipping Point

Various Lumen Packages  Lumen Module CRI CCT Wattage   Color Temperature (K)

            2700 3000 4000

700 Lumens 80+ 40 -70K 12.4 Yes ± 40 Yes ± 50 Yes ± 70

1000 Lumens 80+ 40 -70K 18.3 Yes ± 40 Yes ± 50 Yes ± 70

NEW 1300 Lumens 80+ 40 -70K 21.4 Yes ± 40 Yes ± 50 Yes ± 70

NEW 2000 Lumens 80+ 40 -70K 36.3 Yes ± 40 Yes ± 50 Yes ± 70

ARTIST 700 Lumens 95 40 -70K 21.3   Yes ± 40 Yes ± 50 Yes ± 70

Notes R1 -R8 95

R9 Value 90

R10 - R14 Avg 95

R15 95

3000K 95 CRI 3000K 80 CRI

4000K 80 CRI 3000K 95 CRI

CRI & “R Values”

XicatoTypical Halogen LED Array

Uniform beam (intensity and color Temperature – no yellow ring or shadows)

Selection of uniform beams20o, 40o and 60o

Field Replaceable

Every DASAL LED luminaire undergoes

thorough thermal testing and performance reviews,

including LM79 testing

The Xicato Spot Module integrated into any DASAL luminaire can be replaced by a future

version with a different LED count without necessitating any changes

to the optics and uniformity of the luminaire.

It is “Future Proof” Aurora

Square Wallwash

Starlight

Flare Wallwash

Xicato Pendant Matrix

Xicato Recessed Matrix

This is what happens when you don’t pay attention to the details.

Product to product consistency

This is what happens when you do……

Some new Items on display at Lightfair 2011…

Thank you from..