daeil weft straightener english
Post on 29-Nov-2014
207 Views
Preview:
TRANSCRIPT
Technology with Heart
Weft Straightener Page : 1
DAEIL TECH #905-17, Wolam-dong, Dalseo-Gu, Daegu, Korea
TEL : 0082-53-587-3290~1 FAX : 0082-53-587-3281
http://www.daeil21.com e-mail : young1choi@naver.com
Automatic Weft Straightener
Technology with Heart
Weft Straightener Page : 2
--- Catalogue ---
Essentials and Operation principle of the Weft Straightener
◎ Essentials
◎ Work principle
◎ Control term
◎ Constitute
1. Detector 2. Control unit 3. Rectify unit 4. Tension adjust device
◎ Comparison
1. Detection 2. Controller & Rectifying part 3. Tension controller and the other
DAEIL Weft-Straightener
◎ Specification and Function
◎ Standard Specification
◎ Lay-out
◎ Sketch of Circuit
Technology with Heart
Weft Straightener Page : 3
Essentials and Operation principle of the Weft Straightener
◎ Essentials
The weft straightenter straightens the twisted weft of the woven fabrics which resulted from several processes of
bleaching, washing and dyeing. It can locate and adjust at right angle to the junction between fabric’s weft and
organzine. The weft straightenter is installed before the stenter or printing M/C. It makes the fabric have the best
quality that stentering or printing after correcting the latitude.
◎ Operation principle of the weft straightener
When transmitting, the light is reach to the lens through the fabric slit and the sensors in various angles. Then it
checks out the strongest signal in 11 angles to detect the status of fabric and rectify automatic by the correcting
part (skew and bow roller).
◎ Control condition of the weft straightener
The machine to correct the primary weft status of various fabrics (kind of line and weft status etc.) under any
condition (such as fabric speed) needs accurate detection and good control.
◎ Constitution of the weft straightener
1. Detection When transmitting, the lens centralize the light which penetrated from the slit. Then it checks out the strongest
signal by PHOTO-CELL in various detection angle. We combine every detector together to detect the status of
fabric. In the early stage, the worker should select the density of texture to use Densimeter in Texture density
choice Type. And now it developed to the Fixed slit Type that no need to select density. The other methods
are Rotation slit type (BIANCO, Italy), Oscillation slit type (MAHLO, Germany), Densimeter type and Zoom
slit type (SEIREN, Japan) etc. It can detects accurately only according to the thickness and array of silt. The
best method is to narrow one point of the weft. The combination of the Zoom silt type that can change thickness
and the Rotation slit type that can change array is used for detecting various fabrics. The Fixed slit type is used
in Korea. The accuracy also affected by the number and angle of sensors. The range of angle are ± 13.5° and ±
10°. Dividing those angles into 11 or 15 portions can work out the accuracy of running (± 15°).
Technology with Heart
Weft Straightener Page : 4
2. Controller According to the light that penetrated from the silt, we adjust the detection properly. The weft straightener
acquires the status of fabric and control the rectifying part by the signal that comes from detection to straighten
both skewed & bowed weft status. Because the fabric have slickness and retractility, so it can’t rectify accurately
according to detection angle just by rectifying part. It can rectify the fabric accurately just by controlling the
rectificatory periods (start the periods of rectifying part by working speed), rectifying capacity (according to the
change of angle), position, sensor, angle of detection and the comparison of rectifying.
3. Rectifying Part It is constitutive of skew roller and bow roller that rectify the skewed and bowed distortion. The maximum
correcting capability is decided by the number of rollers, movement and the bow of roller. On the stage, the
maximum skew correcting of weft straightener is 34 percent of the breadth, and the maximum bow correcting is
9 to 11 percent.
4. Tension adjust device The bow roller is driven according to M/C speed. It can avoid the skewed and bowed weft status and wrinkling
badly. It is used for detecting the fabric that is sensitive to tension(such as knitting and spandex etc.).
◎ Comparison of Weft-Straightener
1. Detection
Sort Method Remarks
MAHLO Light Penetration & Reflection TypeOscillation Slit Type
Detecting variety of angles by a sensor. It can read the fixed angle and the distance between angles.
BIANCO Rotation Slit Type Have the same advantage of MAHLO. Be different in time and durability
SEIREN Light Penetration & Reflection TypeZoom slit Type
Select the thickness of Silt according to density of the fabric. It can only read the fixed angle.
DAEIL
FINE
YESS
Fixed Slit Type Light Penetration & Reflection Type
Have a constant the thickness and angle of slit. Have suitable thickness of slit, Read skew and bow of majority fabric
Technology with Heart
Weft Straightener Page : 5
2. Controller & Rectifying Part
3. Tension controller and other devices Tension controller drives the bow roller to control tension by detecting the revolutions of roller under the
detection. There have two bow rollers. You can select the mode of two bow rollers driving together, only one
driving or used none. MAHLO uses no bow roller in most cases. YESS drives one bow roller only. And others
drive two bow rollers. The modes of installing are fixed with setscrew and leveled with sole screw. The former is
used in Europe. The latter is used in Korea & Japan. The DAEIL Machines adds the guide roller to cushion
attack.
Sort Method Remark
MAHLO Micro-computer Hydraulic driving
Twill, skew function
- Correcting accurately when the angle is small. - Correcting one side of fabric to a certain angle quickly.
BIANCO Micro-computer Motor driving
SEIREN Micro-computer Motor driving
DAEIL Micro-computer
Motor driving Twill, skew function
FINE Micro-computer
Motor driving Twill, skew function
YESS Micro-computer Motor driving
- Because of the detection angle, flexibility of fabric and machine speed, the strength and frequency of the correcting units are very important to correcting accurateness. - Because detector not read the angle of twill, it is possible to correct various fabrics - Twill and skew machining
Technology with Heart
Weft Straightener Page : 6
DAEIL Weft-Straightener
◎ A good weft straightener is a machine that can straighten the twisted weft of different fabrics under different process conditions (just as M/C speed etc.)
We hope that our weft straightenter can straighten the twisted weft of all kinds of fabrics. The weft
straightenter on the stage detect the weft status by penetration or reflection. The fabric will be changed
because of the weave, sort of line (changed when boiling), machine speed and even variety of chemicals. So
you should select the weft straightener which can automatically straighten more fabrics under different
process conditions at first. Then you compare the price, trouble rate and after sales service, etc.
Now we compare the weft straightener of DAEIL with others as follows :
1. Controller : Compacted control circuit with powerful micro-computer and PLD.
- Easy operation by touch screen control
- Minimized failure rate
- Manual bow roller available : A function not to operate for a bow roller by detected wrinkle in fabric.
- Compatible with future functions developed : No change in hardware required by processing within a program.
2. TWILL function : Special used for twill fabrics (Good for comb’s teeth pattern).
- For frequent malfunctions, it reduces an error rate by attaching a device to distinguish cross angle with
simultaneous detection of cross angle and weft angle.
Technology with Heart
Weft Straightener Page : 7
KORTEX 2004 exhibition
LCD
3. Skew Processing : A function to turn wefts in the specific state.
- Good for any defect caused by differences in both Stenter chain or for fabrics which require for wefts to be
turned.
4. Tension control : ±20% of speed change
- To keep fixed tensile strength by controlling bow roll according to speed.
5. Reflection & Penetration Type detector
- For fabrics hard to transmit light, for fabrics with different sides (Optional Item)
6. Safety structure against outside shock
- The weft straightener is installed in the middle of the connecting part between stenter and mangle. It has
the safety structure that a retrieval roll to deliver shock down.
7. Automatic reset for malfunctions
- A function to operate again by turning a rectifying unit to the center with wrong angle calculated.
◎ The Weft Straightener will be different in function with different fabric and different engineering.
Technology with Heart
Weft Straightener Page : 8
STANDARD SPECIFICATION
Sort Item Specification Remarks
Roller Width 2,000mmL Max. 3,600mmL Specification
Speed 5 ~ 200m/min
Lamp Halogen lamp 220V x 300W, Equal intensity of radiation
Driving D.C Rectification Fully Digital light with no ripple Lighting
Light Volume Full automatic Adjust automatically with different fabric
Number of Detector 6 (Six) Option : (1) 8 detectors (2) Reflecting
Placement of detector “一” shaped More accurate by “C” shaped
Detecting Method Set the average singly Detecting
Density All range No need to choice density
D E T E C T I O N
Centering Driving Drive Gear method
Skew Roller 3 (Three) Two skew rollers for printing Machine
Bow Roller 2 (Two)
Skewing Range ± 30%
Bowing Range ± 10% Option : 6 ~ 10%
Rectify Accuracy ± 1%
Rectifying Part
Drive D.C Motor Changed by the speed of fabric (Option : AC + Inverter)
Drive Inverter Two bow rollers synchronous drive
Sensing Method Encoder Tension Control
Adjustment Feedback signal Feedback with Motor encoder
Control Control System Intel ATMEL V8 Rapid, accurate, low trouble rate
Twill Twill Mode Special Function
Rectifying in advance Deflect Function Have deflect function to a certain angle
Voltage AC 220V ~ 440V, 3∅ 50 ~ 60 Hz Power Source
Current Max. 2.6 KVA
Color Beige According to the customer’s request Appearance
Painting Powder Electrical Roast Paint Improve the enduring
Reflection Type Infra-red Ray (Coated, Fluff, Corduroy etc.)
Monitor 15″ LCD
Touch Screen 15″
Expand Roller Screw Roll Type Suitable for Knit
Optional Items
Centering Guide Never effected by exterior ray
Technology with Heart
Weft Straightener Page : 9
◎ LAY-OUT
Technology with Heart
Weft Straightener Page : 10
top related