daddddd y english
Post on 03-Jun-2018
218 Views
Preview:
TRANSCRIPT
-
8/11/2019 Daddddd y English
1/11
INTRODUCTION
Last January 16, 2014, Architecture Engineering Technology shop was
inspected. Results of inspection are assessed based on the building
requirements stated in the National Building Code of the Philippines to determine
the shops present condition as to its space, ventilation, illumination, wirings,
safety, maintenance and facilities.
Primary findings of the inspections show the space in the shop room are
290cmx900cmx907cm. Its ventilation is very weak because through the five large
windows in the shop room have broken glass and the shop has only one electric
fan. Illumination in the shop room is provided by six fluorescent lamps. There are
two open wires, but all are working. It has no enough medicine supplies for
emergency cases that may happen during shop hours. The shop is maintained
but its facilities crowd the shop room.
-
8/11/2019 Daddddd y English
2/11
DISCUSSION/BODY AND RESULTS
The inspection was divided into the following sections: space, ventilation,
illumination, wiring, safety, maintenance, and facilities.
Area Detailed Inspection Requirements as stated in the NBCP
1. Space 290cmx900cmx9
07cm
SECTION 803
Maximum site occupancy shall be
governed by the use, type of construction,
and height of the building and the use, area,
nature, and location of the site; and subject
to the provisions of the local zoning
requirements and in accordance with the
rules and regulations promulgated by the
Secretary.
2. Ventilation Artificial
1 electric fan
Natural
5 large windows,
3 of them are
permanently closed.
SECTION 5.01.01: Ventilation
Subject to the provisions of theCivil
Code on easement on light and view, and to
provisions of this Title, every building shall
be so constructed, arranged, and equipped
as to provide adequate light and ventilation.
All building erected shall face a
street or public alley or private street which
http://www.chanrobles.com/civilcodeofthephilippines.htmhttp://www.chanrobles.com/civilcodeofthephilippines.htmhttp://www.chanrobles.com/civilcodeofthephilippines.htmhttp://www.chanrobles.com/civilcodeofthephilippines.htm -
8/11/2019 Daddddd y English
3/11
has been officially approved.
No building shall be altered nor
arranged so as to reduce the size of any
room or the relative area of windows to less
than that provided for buildings under this
Code, or so as to create an additional room,
unless such additional room conforms to the
requirements of this Code.
No building shall be enlarged, so
that the dimensions of any required court
yard would be less than that prescribed for
any such building.
3. Illumination 6 fluorescent
lamps
SECTION 801
Every building shall be designed,
constructed and equipped to provide
adequate light.
4. Wirings 4 sockets
2 of them are
open (uncovered)
All are working
Section 3.0.1.4: Protection Against
Physical Damage
Where subject to physical damage,
conductors shall be adequately protected.
No grounded conductor shall be
attached to any terminal or lead so as to
reverse the designated polarity.
-
8/11/2019 Daddddd y English
4/11
-
8/11/2019 Daddddd y English
5/11
1 trashcan
1 wall clock
4 dividers
2 bulletin board
52 tables and
chairs
existing and new, and all parts thereof shall
be maintained in a safe and sanitary
condition. All devices or safeguards, which
are required by this Code in a building or
structure when constructed, altered, or
repaired, shall be maintained on good
working order.
7. Facilities Overcrowded
facilities
Table 1. Result of detailed inspection and requirements stated in the NBCP
Figure 1: Inside the Shop of ART (Architecture Technology Shop)
-
8/11/2019 Daddddd y English
6/11
Figure 2: Outside the Shop of ART (Architecture Technology Shop)
All area seemed to be in a very good state except for the safety, because the
shop has no fire extinguisher, and for maintenance because they have no first
aid kit in case of emergency.
-
8/11/2019 Daddddd y English
7/11
-
8/11/2019 Daddddd y English
8/11
ABSTRACT
This technical writing report are all about the present condition of the shop we
inspected and we used in our school (TUP-C *Technological University of the
Philippines-Cavite Campus) and the requirements as stated in the National
Building Code of the Philippines (NBCP), and for a requirements we need to
submit in our subject in English 3.
In this report, we inspected all the area that we can see in the shop room
condition as to its; space, ventilation, illumination, wirings, safety, maintenance,
and facilities, and to see its present condition and if they are following the
requirements stated in the NBCP.
The shop room that is assigned for me to inspect is the drawing room or the
Architecture Technology Shop (ART). And based on my inspections/observations
during the activity we are doing all areas seemed to be well-maintained and all
are in good conditions. But there are many things that the shop needs to
improved even they are seemed to be in good state room like they need the
following: more electric fans, chairs, drawing tables, fluorescent lamps, first aid
kit, open window to supply the light and air they needed and also a lot of space.
Also they need to cover up the exposed and hang wires so that it will not cause
accidents that may happen during the shop hours.
-
8/11/2019 Daddddd y English
9/11
RECOMMENDATION
There are plenty of needs that the shop must require to have. For the area of
ventilation it is recommended to fix the 3 broken glasses on the large 5 windows
that are broken. For illumination, it put 3 more fluorescent lamps in the shop
room to supply the light the students need when they are taking classes during in
the evening. For safety, put first aid kit and a fire extinguisher in case of
emergency. And for the facilities, I recommended that it was more applicable if
the drawing table is placed 5 cm away from each other.
-
8/11/2019 Daddddd y English
10/11
Technological University of the Philippines-Cavite Campus
CQT Avenue, Salawag, Dasmarias
Inspection report in
ARCHITECTURE ENGINEERING TECHNOLOGY SHOP
By
Marvin M. Medenilla
PPETE2I
A technical paper submitted
In partial fulfillment on the requirements
In English 3, Technical Writing
Liberal Arts Department
Technological University of the Philippines Cavite
March 06, 2014
-
8/11/2019 Daddddd y English
11/11
REFERENCES
top related