cvfd training – fire alarms & communication sffma training objectives: 16-01.01 – 16-01.08

Post on 24-Dec-2015

215 Views

Category:

Documents

0 Downloads

Preview:

Click to see full reader

TRANSCRIPT

CVFD Training – Fire Alarms & Communication

SFFMA Training Objectives:16-01.01 – 16-01.08

Topics to cover• 16-01.01 Trainee shall define the procedure for a citizen to report a fire or other emergency. • 16-01.02 Trainee shall demonstrate receiving an alarm or a report of an emergency, and initiate

action. • 16-01.03 Trainee shall define the purpose and function of all alarm-receiving instruments and

personnel-alerting equipment provided in the fire station. • 16-01.04 Trainee shall identify traffic control devices installed in the fire station to facilitate the

response of apparatus. • 16-01.05 Trainee shall identify procedures required for receipt and processing of business and

personal calls. • 16-01.06 Trainee shall define and demonstrate prescribed fire department radio procedures

including: – A. routine traffic– B. emergency traffic – C. emergency evacuation signals

• 16-01.07 Trainee shall define policy and procedures concerning the ordering and transmitting of multiple alarms of fire and calls for special assistance from the emergency scene.

• 16-01.08 Trainee shall define all fire alarm signals, including multiple alarms and special signals, governing the movements of fire apparatus, and the action to be taken upon the receipt of each signal.

Citizens Actions for Emergency

• Civilians will be primary person who will report emergencies– Actions to report fire:

• Call 911 and request fire department– Provide correct address and provide description of fire

– Actions to report MVA:• Call 911 and request EMS & Fire Department

– Provide most accurate intersection and attempt to give any sort of scene size up

– Actions to report other emergencies:• Call 911 and describe situation to Dispatcher

Firefighter actions on receiving call

• Steps:1. FF will move to the station in which apparatus is

toned2. FF will call standing by (based off of seniority will

call if driver or not)3. FF will start apparatus4. FF will begin determining the quickest route to call5. Once complete crew is present, apparatus will

move to call (emergency or non-emergency)6. En-route, CO, will begin giving actions upon arrival

Alarm Receiving Equipment

• Station / Home Scanner• Personal / Department Handheld Radio– Only distributed to authorized fire fighters– Provides two way communication

• Minotor Receiver– Only allows for receiving of Primary Channel traffic

• Pager– Easily transported means of receiving alarm

• Cell Phone– Newest was of receiving alarm

3.6

Introduction (1 of 2)

• Fire service communications is an important role of the fire service.

• Telecommunicators must communicate with citizens and relay information to first responders.

• Communications have a great impact on the delivery of service.

3.7

Introduction (2 of 2)

• Communication process must be complete and understood to be effective.

• Leaders are taking proactive measures to ensure quality.

3.8

Communications Personnel (1 of 3)

• Basic role of communications has not changed over time.

• Telecommunicator responsibilities– Receiving calls– Evaluating response need– Initiating appropriate response– May remain on the line, provide pre-arrival

instructions

3.9

Communications Personnel (2 of 3)

• NFPA 1061 - Standard for Professional Qualifications for Public Safety Telecommunicators

• Detailed work performance evaluation program follows training programs

3.10

Communications Personnel (3 of 3)

• Communication managers rely on historical data to produce staffing models and requirements.

• Fire departments must provide well-trained personnel to serve as telecommunicators.– These individuals have a direct impact on the

overall response time of the agency.

3.11

The Communications Facility (1 of 3)

3.12

The Communications Facility (2 of 3)

• NFPA 1221 - Standard on location and construction of communication centers– Dispatch centers range in size and staffing.– All serve common goal of receiving and

delivering information.– All communication centers should have a

backup in place.

3.13

The Communications Facility (3 of 3)

• New technology in hardware and software has allowed incorporation of computers.– Computer-aided dispatch systems– Tracking location and status of incidents and

vehicles

3.14

Receiving Reports of Emergencies (1 of 3)

• Call-taking process– Receiving a report– Interviewing– Referral or dispatch

• Telecommunicators– Prioritize incoming calls– Answer incoming lines promptly– Control the conversation

3.15

Receiving Reports of Emergencies (2 of 3)

• The following information must be obtained.– Location of emergency– Nature of the emergency– Callback number– Caller’s location and situation

3.16

Receiving Reports of Emergencies (3 of 3)

• Call taker must ask the right questions to generate proper responses.

• Many departments use emergency medical dispatch protocols for dealing with EMS calls.

3.17

Call Process

3.18

Methods of Receiving Reports of Emergencies (1 of 5)

• Reports of emergencies can be received in various ways.– Telephone is the most common means.– 93% of the population in the US have 911

access.– 95% of the 93% have enhanced 911.– Geographically, 50% of nation has 911.

3.19

Methods of Receiving Reports of Emergencies (2 of 5)

• Enhanced 911 provides telephone numbers and addresses of call origins.

• Cellular phone is becoming very common.• By 2000, cellular phones must be able to

provide means to determine caller location.

3.20

Methods of Receiving Reports of Emergencies (3 of 5)

• Municipal fire alarms allow a coded or voice message to be generated from an alarm box.– Alarm boxes located in areas of easy access and

visibility– Began near the turn of the century– Commonly referred to as call boxes

3.21

Methods of Receiving Reports of Emergencies (4 of 5)

• Call boxes

3.22

Methods of Receiving Reports of Emergencies (5 of 5)

• Automatic alarm systems are another means to notify communications.

• Two types of alarm systems defined by NFPA.– Type A receives alarm from a fire alarm box and

retransmits to a fire station manually or automatically.

– Type B automatically sends alarm.

3.23

Type A Municipal Alarm

3.24

Type B Municipal Alarm

3.25

Reports via TDD

• ADA entitles citizens to equal service.

• Communications need to receive calls from specialized equipment.

• Keyboard uses text messages rather than voices.

3.26

Walk-Up Alarms• Report of an emergency

may be received at fire station.

• Firefighter must obtain information.

• Communication center must be notified.

3.27

Emergency Services Deployment (1

of 2)

• Once an emergency is reported, action must be taken.

• Most response organizations have a preassigned standard response.

• Communication centers have deployment plans.– Deployment is based on apparatus, equipment, and

personnel available.

3.28

Emergency Services Deployment (2 of 2)

• Deployment may be done manually or through computers.

• Next step is to notify responders. – Several methods exist.– Some departments use mobile data

terminals.

3.29

Notification Systems

3.30

Mobile Data Terminal

• Computers mounted in apparatus.

• Dispatch information displayed on screen.

• Units can communicate with dispatch by pushing buttons.

3.31

Traffic Control Systems

• Some jurisdictions use emergency preemption systems to control traffic signals.– They provide a safe transition to a priority right-of-

way for emergency vehicles.– System designed to recognize emergency vehicle

and change traffic control signal.

3.32

Radio Systems and Procedures (1 of 2)

• Radio system is the primary link between field units and communications center.

• Radio frequencies commonly used by the fire service are:– VHF low band– VHF high band– UHF

3.33

Radio Systems and Procedures (2 of 2)

• FCC monitors frequencies.• 800 Mhz range frequencies have also been allocated.• All personnel must be able to talk properly over the

radio.• A clear and concise message is important.• Some departments use “10-codes,” while others use

clear speech.

3.34

Proper Use of Radio

3.35

Arrival Reports

• First arriving unit establishes command and provides initial report.

• Command can be transferred as needed.• Status reports should be given regularly

during large incidents.• Some SOPs call for time marking incidents at

regular intervals.

3.36

Mobile Support Vehicles

• In large incidents, a mobile communications center may be used to support an incident.

3.37

Records

• Maintain proper documentation and records for all responses.

• Keep telephone and radio traffic in manual log book or recording device.

• Fire reports are considered public records.• Most states have minimum data that must be

recorded and maintained.

3.38

Recording Devices

3.39

Summary

• How emergency calls are answered and information processed has a direct impact on the public’s impression of the department.

• Answering calls quickly, gaining control, and, possibly, calming the caller is very important.

• Use knowledge and skills, and all the available resources to successfully handle an emergency incident.

top related