curriculum vitae personal data• requirement analysis for missile dynamics simulation •...

CURRICULUM VITAE

PERSONAL DATA

Name: Baeten Forename: André Date of Birth: 19.09.1974 in Wesel, Germany Address: Augsburg University of Applied Sciences

Faculty of Mechanical and Process Engineering An der Hochschule 1 D-86161 Augsburg Germany

Telephone: (+49) 821-5586-3176 E-Mail: andre.baeten@hs-augsburg.de

Work Experience 2009 - present Professor of Lightweight Construction, Composite Technology and Technical Mechanics Augsburg University of Applied Sciences, Germany Responsibilities:

• Head of the study and research field “composite technology” and “aerospace engineering” • Head of the test lab “composite materials” • Point of contact for the Carbon Composites association activities • Supervisor of PhD candidates • Research professor in composites technology and fluid structure

interaction • Founding member of the research group HSA_comp

2007 – 2009 Systems engineer air defense systems

MBDA Germany GmbH, Unterschleissheim, Munich, Germany Responsibilities: Development of a missile simulation environment and systems

engineering for the Medium Extended Air Defense System (MEADS)

• Requirement analysis for missile dynamics simulation • Definition of test plans and specifications for missile components • Responsibility for the work package MEADS-CMR internally and

externally • Member of the missile expert team Germany, Italy and the US

2000 - 2007 Research Engineer Store Release and Jettison EADS Military Air Systems GmbH, Ottobrunn, Munich,

Germany

Responsibilities: Weapon integration and simulation of store release and jettison for the military aircrafts Eurofighter and Tornado

• AMRAAM, IRIS-T, Meteor release and jettison simulations • Supervision of flight tests with partner companies • Improvement of the simulation tools for air vehicle dynamics

(Booster, Autopilot, Guidance, Fins) • Safety engineering and high-g release clearance expert • Expert in simulation of liquid dynamics in tank systems of aircraft and spacecraft

EDUCATION

2007 Academic degree PhD (Dr.-Ing.) 2003 - 2006 PhD thesis „Liquid Sloshing Simulation using a Three-

Dimensional Particle-Cluster Approach” at the Aerodynamic Institute (AIA) of Aachen technical University (RWTH), Germany

1999 Academic degree Diplom-Ingenieur (Dipl.-Ing.) in Mechanical

Engineering, major topic: Aeronautics Diploma thesis “Numerical Analysis of the noise emission of a transonic low pressure compressor in aircraft jet engines” , MTU Aero Engines, Munich, Germany

1998 - 1999 Studies “Aeronautics” at the École Nationale Supérieure

d’Ingénieurs de Constructions Aérospatiales” (ENSICA), Toulouse, France

• Project work: “Experimental Demonstration of Minimal

Artificial Weightiness Space Station Deployable Structure” 1994 - 1999 Studies “Mechanical Engineering” Technical university of

Aachen (RWTH), Germany

• Major field of study: Fluid-Structure Interaction Simulation (Fortran / C++)

• Project work in governmental funded research cluster “design of spacecraft: Numerical investigation of step flows in hypersonic speed

SCIENTIFIC PUBLICATIONS

[1] Baeten, A (2015). ""Lagrange-based Modeling and Testing of Composite Structure Impact Dynamics," 53rd AIAA Aerospace Sciences Meeting and Exhibiti, Kissimmee, FL, paper AIAA-2015-2022452 [2] Baeten, A (2012). "Composite Tank Structure Dynamics Modeling based on Finite Particles," 71th Annual Conference of Society of Allied Lightweight Engineers (SAWE), Bad Gögging

[3] Baeten, A, Thalhofer, U (2012). "Modeling of Coupled Diaphragm-Liquids-Dynamics for Space Applications," 50th AIAA Aerospace Sciences Meeting and Exhibit, Nashville, TN, paper AIAA-2012-0095 [4] Baeten, A, Jüttner, J C, Sauer, D (2011). "Analyse des Aussetzverhaltens eines Pico-Satelliten", Deutscher Luft- und Raumfahrtkongress, Bremen [5] Baeten, A, Jüttner, J C (2011). “Orbit Insertion Dynamics of a Pico-Satellite with respect to Coupled Solid-Liquid Dynamics,” 49th AIAA Aerospace Sciences Meeting and Exhibit, Orlando, FL, paper AIAA-2011-0391 [6] Baeten, A, Jördening, A, (2010). “Spacecraft Thruster Efficiency Optimization with respect to Coupled Solid-Liquid Dynamics,” 48th AIAA Aerospace Sciences Meeting and Exhibit, Orlando, FL, paper AIAA-2010-1446 [7] Baeten, A (2009). “Prediction of Spacecraft Fuel Dynamics in Microgravity,” 47th AIAA Aerospace Sciences Meeting and Exhibit, Orlando, FL, paper AIAA-2009-1320 [8] Baeten, A (2008). "Dynamic Wave Impact Simulation using an Innovative Particle-Cluster Scheme ," International Congress of Theoretical and Applied Mechanics (ICTAM), Adelaide, Australia [9] Baeten, A, Stern, D (2008). “Prediction of Highly Dynamic Airborne Tank Fuel Sloshing and Impact Effects,” 46th AIAA Aerospace Sciences Meeting and Exhibit, Reno, NV, paper AIAA-2008-0658 [10] Baeten, A (2007). “Liquid Sloshing Simulation Using a Three-Dimensional Particle-Cluster Approach,” Phd Thesis, Department of Mechanical Engineering, RWTH Aachen University, Germany [11] Baeten, A, Gleissl, R (2005). “Prediction of Fuel Impact Effects on Tank Pitch Characteristics during Jettison,” NATO-RTO AVT 123, Budapest, Hungary [12] Baeten, A, Gleissl, R (2004). “Prediction of Tank Fuel Sloshing during Jettison,” NATO-RTO AVT 108, Williamsburg, VA NETWORKS

• Association of German Engineers / Verein Deutscher Ingenieure (VDI) • German association of Aeronautics (DGLR) • American Institute of Aeronautics and Astronautics (AIAA) • Society for the Advancement of Material and Process Engineering (SAMPE) • International Society of Offshore and Polar Engineers (ISOPE)

ISOPE MEMBERSHIP AND ACTVITIES ISOPE member since 2009 ISOPE Papers & Presentations [1] Baeten, A (2019). „Structural Damping of Hybrid Structures Exposed to Sloshing,“ ISOPE-2019-TPC-0127, Honolulu, USA [2] Baeten, A (2018). "Damage Growth Analysis in Composite Structures Exposed to Sloshing," ISOPE-2018-0139, Sapporo, Japan [3] Baeten, A (2017). "Fluid Structure Interaction Analysis of Composite Structures exposed to Sloshing," ISOPE-2017-039, San Francisco, USA [4] Baeten, A (2016). "Floating Body Wave Interaction Simulation using a Lagrange Approach," PACOMS-2016-001, Gold Coast, Australia [5] Baeten, A (2016). "Wave Load Simulation on Submerged Offshore Structures using a Lagrange Approach," ISOPE-2015-TPC-0155, Rhodos, Greece [6] Baeten, A (2015). "Numerical Analysis of Liquid Impact Energy Dissipation," ISOPE-2015-TPC-0106, Hawaii, USA [7] Baeten, A, Barm, S, Dorsch, J K, Gottfried, L, Rotter, J (2013). "Floating Body in Wave Current Simulation using a Finite Particle Approach," ISOPE-2013-TPC-0192, Anchorage, Alaska, USA [8] Baeten, A (2012). "Finite Particle based Elastic Structure Dynamics Modeling for LNG Sloshing Analysis," ISOPE-2012-TPC-0113, Rhodos, Greece [9] Baeten, A (2011). “Coupled LNG Carrier Sloshing-Structure Dynamics in a Lightweight Multi-Tank Configuration,” ISOPE-2011-TPC-119, Maui, Hawaii [10] Baeten, A (2010). “LNG Tank Sloshing Parameter Study in a Multi-Tank Configuration,” ISOPE-2010-TPC-212, Beijing, China [11] Baeten, A(2009). “Optimization of LNG Tank Shape in Terms of Sloshing Impact Pressure,” ISOPE-2009-TPC-128, Osaka, Japan [12] Baeten, A, Stern, D (2008). “Prediction of Dam Break Hydrodynamic Wall Pressure,” ISOPE-2008-TPC-105, Vancouver, Canada, July 06-11 ISOPE Technical Program Committee (TPC) 2016-present TPC member ISOPE Technical Committees (TC) 2010-2011 Sloshing TC member

2012 Hydrodynamics TC member 2013-2016 Sloshing TC member 2017 Sloshing TC secretary 2019 Sloshing TC chair ISOPE Session Chair 2013 Session Co-Chair “Hydrodynamics” 2015 Session Chair 62. SLOSHING & LNG SHIP DYNAMICS II: Liquefaction &

Sloshing (V. 3) 2016 Session Chair „Hydrodynamics“ 2016 PACOMS: Session Chair No. 6, Hydrodynamics II 2017 Session Chair No. 33. LNG SLOSHING IV: Impact Assessment (V. 3) 2017 Introduction to Keynote Speaker Prof. Frederic Dias 2018 Session Chair „Hydrodynamics“ 2019 Session Chair “Sloshing” ISOPE Sloshing Panel 2016 Panel organization and presentation: No. 69. SLOSHING VII: Panel 1

Aerospace and Defense 2017 Panel organization and presentation: No. 43. SLOSHING V: Panel (V. 3; Sloshing Phenomena in Fluid-Structure Interactions [Oral presentation] IJOPE Paper & Review 2016–2018 Reviewer for IJOPE manuscripts 2017 Baeten, A., manuscript for review: “Fluid Structure Interaction Analysis of

Composite Structures exposed to Sloshing“ (to be completed in 2018)

Prof. Dr.-Ing. André Baeten 21.06.2020