crescent heart software robing roducts sata-ii · sata-ii control application main window (left)...

Post on 25-Jan-2021

0 Views

Category:

Documents

0 Downloads

Preview:

Click to see full reader

TRANSCRIPT

  • SATA-IIHigh-Performance Serial ATA Probing Support

    For Use With Tektronix® TLA5xxx/6xx/7xx/7xxx Logic Analyzers

    Features• Serial ATA II, Serial ATA 1.0 and ATA/ATAPI 6 compliance

    • 1.5 Gb/s Gen1 and 3.0 Gb/s Gen2 bus signaling rates supported

    • Supports SATA compliance frame error rate (FER) measurements without use of a logic analyzer

    • Acquisition of spread-spectrum-clocked data streams supported

    • Monitors, triggers on, acquires and displays all aspects of Serial ATA signaling, including bus signal level (squelch),out-of-band (OOB) signaling, primitives, FIS frames, encoding and protocol errors (including independent CRCverification), bus utilization and error statistics

    • Optional acquisition of undecoded (10b) data or unscrambled Data FIS contents

    • Optional timing waveform display of bus signal level (squelch) behavior

    • Testpoints allow bus signal level (squelch) behavior to be monitored

    • Efficient use of acquisition memory achieved through optional compressed storage of repeated primitives

    • Trailing portions of lengthy FIS Data frames can be optionally suppressed

    • Works with Tektronix® TLA5xxx/6xx/7xx/7xxx logic analyzers having 136 channels and 75 MHz acquisition capability(150 MHz acquisition capability recommended); supports use of Mictor® or compression probes (with adapters)

    • USB port on analyzer or host computer provides probe adapter configuration and control

    • Listing window hierarchical display shows optionally-acquired undecoded/unscrambled data, primitives, FIS frames anddevice command protocol

    CRESCENT HEART SOFTWARE Serial ATA PROBING PRODUCTS

    w HARDWARE & SOFTWARE PRODUCTS FOR USE WITH TEKTRONIX® LOGIC ANALYZERS & OSCILLOSCOPES w

  • Example logic analyzer listing display of acquired Serial ATA host channel (left) and device channel (right) bus activity

    SATA-II Control application main window (left) and error-rate Counters window (right)

    Contact Crescent Heart Software• Internet: www.c-h-s.com; E-mail: sales@c-h-s.com; Voice: (+1)503-232-2232; Facsimile: (+1)503-232-2255

    • Please make inquiry regarding part numbers SATA-II (probe adapter protocol analyzer with frame error rate monitoringlicense) and SATA-II-NoFER (SATA-II without the frame error rate monitoring license)

    • Crescent Heart Software, a Tektronix® Embedded Systems Tools Partner and a member of the Tektronix® LogicAnalyzer Third Party Developer team, is headquartered in Portland, Oregon USA. Crescent Heart Software has been amember of the Serial ATA 1.0 and Serial ATA II Working Groups

    • Information presented herein is subject to change without notice (datasheet Revision H, July 2007)

    CRESCENT HEART SOFTWARE Serial ATA PROBING PRODUCTS

    w HARDWARE & SOFTWARE PRODUCTS FOR USE WITH TEKTRONIX® LOGIC ANALYZERS & OSCILLOSCOPES w

top related