crane 123

CRANE

Faculty Adviser : Dipti raval mem

Submit by :11CL155 11CL153 11CL154 11CL156 10CL043

INTRODUCTION A crane is a type of machine, generally

equipped with a hoist, wire ropes or chains, and sheaves, that can be used both to lift and lower materials and to move them horizontally.

It uses one or more simple to create mechanical advantage and thus move loads beyond the normal capability of a human.

CRANE PARTS & ITS MECHANISM

Main Basic Lifting Parts Of The Crane: Lever Pulley The hydraulic cylinder A balance crane contains a horizontal beam (the

lever) pivoted about a point called the fulcrum. A jib crane contains a tilted strut (the jib) that supports

a fixed pulley block. Cables are wrapped multiple times round the fixed block and round another block attached to the load.

For stability, the sum of all moments about any point such as the base of the crane must equate to zero.

Types of craneMobile craneTower craneGantry craneWheel-mounted craneJib craneTruck-mounted craneCrawler craneOver head traveling cranePower-Operated CranePulpit-Operated Crane

Remote-Operated CraneSemi gantry CraneShop CraneWall-Mounted CraneWall-Mounted Jib CraneAutomatic CraneCab-Operated CraneCantilever Gantry CraneFloor-Operated CraneHydraulic crane

Mobile Crane:

(a) is used primarily for raising or lowering a freely suspended load;(b) is capable of travelling over a supporting surface without the need for fixed runways(including railway tracks); and(c) relies only on gravity for stability, with no vertical restraining connection between itselfand the supporting surface, and no horizontal restraining connection (other than frictionalforces at supporting-surface level) that may act as an aid to stability.

Uses of mobile crane:

Tower craneHeavy lifting for tall

buildingsMax. unsupported height

typically 265’ (80 m)

Much greater heights when supported by building’s framework

Max. reach 230’ (70 m)Max. lift 19.8 Tons (18t)Counter weight = 20 TonsMaximum load-moment =

300 tonne-meter ex.: 30m (100’) radius yields a 10t lifting capacity

Limit switches for max. load & load-moment

Gantry crane• This type of crane is

similar to the bridge crane except that it runs on a runway at the floor level. The bridge is supported by a pair of rigid steel legs which are carried by a pair of end trucks along the floor level runway.

Specifications:-

Lifting Capacity: 5 tones to 10 tonesWorking Radius: 23 m

Use:In the construction of Bridge superstructure for lifting

heavy girder. In Ship manufacturing industry ,for lifting heavy parts of ships.

Jib crane• This type of crane consists of a

pivoting head and boom assembly which carries a hoist and trolley unit.

• Lifting Capacity: 1 to 300 tones• Working Radius: 70m• Use: Jib crane used in ship

yards for lifting heavy machinery and equipment, weighing 100 to 300 tons.

Wheel mounted crane

It is the cranes mounted on a rubber tire truckwill provide great mobility.

• Lifting capacity: 20 to 30 tones• Working Radius: 15m to 20m• Use: It is used for the loading and unloading of motor vehicle rolling

stock, for cargoes primarily of a heavy and single-item nature, and also for construction and repair work.

Truck-mounted crane Crawler crane

Over head traveling crane

Over head traveling crane• Overhead Crane can build top running cranes,

under running cranes, double girder cranes, and single girder cranes ranging from:

• Capacities - 1/4 ton through 100 tons• Spans - 5' through 125‘• Use: The most common overhead crane use is

in the steel industry.

Remote-Operated Crane

Pulpit-Operated Crane

Semi gantry Crane

Shop Crane

Wall-Mounted Crane

Wall-Mounted Jib Crane

Cab-Operated Crane

Cantilever Gantry Crane

Floor-Operated Crane

Minimum Clearance Distances From Power Lines

Safety use for crane operating

Standard Hand Signals for Controlling Crane Operations

Crane company in world

Ranking Crane company Country Operation area Biggest mobile crane

1 Mammoet Netherlands Worldwide PTC 200 DS

2 Sarens Belgium Worldwide SGC-120

3 Lampson International USA Worldwide Lampson LTL-3000

4 ALE United Kingdom Worldwide AL.SK350

5 Maxim Crane Works USA Worldwide Manitowoc 18000 Max-er

6 All Erection & Crane Rental USA Worldwide Manitowoc 21000 Max-er

7 Tat Hong Holdings Singapore Worldwide Terex Demag CC 8800-1

8 Sanghvi Movers India National Liebherr LR 1750

9 Al Jaber Heavy Lift & Transport UAE Worldwide Terex Demag CC 8800-1 Twin

10 Essex Rental Corp USA Worldwide Manitowoc 888 Ringer

11 Prangl Austria Continental Terex Demag CC/TC 2800

12 Mediaco Lifting France Worldwide Terex Demag CC 2800

13 Weldex Scotland Worldwide Liebherr LR 11350

14 Tiong Woon Crane & Transport Singapore Asia & Middle East Terex Demag CC 8800-1

15 Sarilar Heavy Lift & Transport Turkey Worldwide Terex Demag CC 8800-1

16 MIC Corporation Japan National Terex Demag CC 8800-1

17 Deep South Crane & Rigging Company USA National TC-36000 Versacrane

18 ABG Infralogistics India Continental Terex Demag CC 6800

19 Uchimiya Transportation & Engineering Japan National Terex Demag CC 6800

Tower crane site visiting

About crane:

Mast anchor-bolted to 30’ x 30’ x 4’ pad

Concrete pad weighs over 500,000#’s

Mast sections are typically 20’ x 10’ square

Slewing unit mounts at top of mast (tower)

Cat-head, jib, trolley, machinery arm, ties, & operator’s cab

Machinery arm contains motors, electronics, cable drum, and counter weight

Construction siteWest gate Near YMCA clubon S.G. highway

Crane buy from ahemedabad

Nilkanth Engineering Works, Ahmedabad

Address: Plot No. 5503/2, G.I.D.C., Vatva, Ahmedabad - 382 445, Gujarat, India Phone: +(91)-(79)-25835553

1 st company proposal

Feature: Tower Crane Condition: New Application: Construction

Rated Loading

Capacity:

10T Rated Lifting Moment: 1600KN.M Max. Lifting

Load:

200m

Max. Lifting Height: 190M Span: 65m Place of Origin: Henan China

(Mainland)

Brand Name: UNIQUE Model Number: QTZ160(6516) Certification: ISO

Warranty: More than one

year

After-sales Service

Provided:

Engineers available to service

machinery overseas

Hoisting Speed: 100/50r/min

Slewing Speed: 0.6r/min Luffing Speed: 60/30/10m/min

Crane company name: Zhengzhou Unique Industrial Equipment Co., Ltd.

Main Parameters of QTZ160 Tower Crane In India :Model: QTZ160(6516)Radius: 65MHook Height: 50MMax. height: 190MMax. hoisting Capacity: 10TStandard Mast Section Size: 1.935x1.935x2.8MHoisting Speed: 100/50r/minSlewing Speed: 0.6r/minLifting Speed: 60/30/10m/minCost : 98000 US $

2 nd company proposal

Stacker's And Mover's India Manufacturing Company

Address: Plot No. 1 - 5 / B, Phase - 2, G. I. D. C., Near Winzol Railway Crossing, Vatva, Ahmedabad - 382445, Gujarat, India

Phone: +(91)-(79)-25894688Preferred Number: 08447568934

Crane company name: Shandong Huaxia Group

Feature: Tower Crane Condition: New Rated Loading Capacity:

6t

Rated Lifting Moment:

760 Max. Lifting Load:

6t Max. Lifting Height:

140m

Span: 50m Place of Origin:

Shandong China (Mainland) Brand Name: huaxia

Model Number: QTZ63(5013) 6t Payment terms:

30% TT, 70% LC Guaranty period:

1year

Delivery time: 20days

Name Unit ParametersNominal hoisting moment kN.m 760/870

Max. Hoisting weight t 6Rated hoisting weight at jib nose t 1.3

Working radius m 2.5-50

Height (m)Anchoring M 40Climbing m 140

Hoisting speed

Magnification   2X 4XHoisting speed M/min

8 40 80 4 2040

Max. Hoisting weight t 3 3 1.5 6 6 3Swing speed R/min 0.6

Radius changing speed M/min 22/44Top rising speed M/min 0.5

 Tower crane weight

Net weight (anchoring)T 31.4(32.9)

Ballast weight T 12Total weight (anchoring)

T 43.4(44.9)

Working swing radius M 51.254Rear swing radius M 12.06

Maximum working wind speed M/S 20Maximum wind speed for top rising M/S 13

Ambient temperature °C -20~+40

cost : US $50,000 - 56,000 / Set

Crane company name: POTAIN Tower Cranes

Feature: Tower Crane Condition: New Application: all kinds of construction

Rated Loading Capacity:

5T,6T,8T,10T,12T Rated Lifting Moment:

500KN.m/630KN.m/800KN.m/1000KN.m/1200KN.m

Max. Lifting Load:

5T,6T,8T,10T,12T

Max. Lifting Height:

120m/120m/150m/150m/150m

Span: 120m/120m/150m/150m/150m Place of Origin:

Henan China (Mainland)

Brand Name: YUJIE Model Number: QTZ-63 Certification:

CE,ISO,BV,SGS

Warranty: ONE YEAR After-sales Service Provided:

Engineers available to service machinery overseas

color: according to the customer's requirements

XX: XSX

 Type of Tower Crane

      QTZ60 Series  

        QTZ63 (5013) QTZ63P (5010) QTZ63P (5011)

 Metric Lifting Moment (KN.m)

      630  

 Wokring Radium (m)

    50 50 50

 Hoisting Capacity (T)

    1.3-6.0 1.0-5.0 1.1-5.0

Hoisting  Independent Stationary (m)

  39 32 32

Height  Attached Stationary (m)

  120 120 120

Hoisting   2 Fall   75/38/7 50.8/25.4/9 50.8/25.4/9Speed   4 Fall   37.5/18.5/3.5 25.4/12/4.5 25.4/12/4.5

 Slewing Speed (r/min)

    0-0.6 0-0.64 0-0.64

 Trolley Travel Speed (m/min)

    38/19 38/19 38/19

 Section of Tower Mast (mm)

    1600x1600 1600x1600 1600x1600

Material of Main Tower Mast Section (mm)

    ∠160x160x16 ∠160x160x14 ∠160x160x14             

Gib  Upper Branch

  Seamless Steel Pipe  Square Tube Square Tube

   Lower Branch

  Square Tube Square Tube Square TubeCost : 86000 US $ , 85000 US $ , 82000 US $

Final crane selection : POTAIN Tower Cranes 10 T

Crane model no: QTZ63P (5010)

Price : 85000 US $ = 45,90,000 IND Rs in 54 rupee dollar price +08,43,000 tax Final price= 54,33,000 IND Rs

Crane photos on site:

Video of crane:

Thank you