cost data datasheets volume i, chapter iii, part one ... · chapter 23 wastewater collection, ......
Post on 16-Apr-2018
217 Views
Preview:
TRANSCRIPT
NoDoC, a Database on Cost for Oil & Gas Projects
Cost Data Datasheets
Volume I, Chapter III, Part One Mechnical Equipment
Last Update: Feb. 2014
Robust and reliable for all Projects and Operations
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
What this is
Experience in the industry may be difficult to find and when found comes at a premium. Yet we all recognize that an estimator can make or break a company through lost project proposals due to an inflated price tag or one that was too low.
NoDoC is an estimating cost database, specifically designed to be spec driven for costing material, labor, equipment and consumables, for the fabrication and installation of oil & gas units and facilities. NoDoC Database is commonly used in industrial applications where a
reliable source of data is required for cost estimation. These special datasheets is provided to present characteristics and parameters of cost that one will search and find desired data accordingly. The datasheets are provided in different chapters within ten Chapters shown below:
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
Chapter 01 Process Equipment Volume I Material Database
Chapter 02 Process and utility Packages Chapter 03 Mechanical Equipment (This Chapter) Chapter 04 Pipe, Fitting and Valves Chapter 05 Electrical Materials and Equipment Chapter 06 Instrumentation and control Material and Equipment Chapter 07 Civil and Structural Material Chapter 08 Drilling Equipment, accessories and facilities, Onshore Chapter 09 Drilling Equipment, accessories and facilities, Offshore Chapter 10 Process Units
Update period: Quarterly
Chapter 01 Mechanical Volume II Labor Database
Chapter 02 Piping Chapter 02 Electrical Chapter 03 Instrumentation and Control Chapter 04 Civil Chapter 05 Structural Chapter 06 Drilling
Update period: Yearly
Chapter 01 Onshore Volume III Machinery and vessels
Chapter 02 Offshore
Update period: Quarterly
Chapter 01 Oil & Gas well drilling Volume IV Line Items, Subcontracting activities
Chapter 02 Offshore structural installation works, Jacket and platforms
Chapter 03 Onshore fabrication and construction works of offshore jackets and platforms
Chapter 04 Onshore lead-out and offshore transportation of structural works, Jacket and platforms
Chapter 05 Offshore Pipe laying Chapter 06 Offshore cable laying
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
Chapter 07 Wellhead Facilities Chapter 08 Surface facilities Chapter 09 Gathering units Chapter 10 Separation, Desalination, Dehydration, sweetening and
purification units Chapter 11 Central processing facilities Chapter 12 Oil and gas transfer pipelines Chapter 13 Oil & gas intercity pipelines Chapter 14 oil and gas above ground surface pipelines Chapter 15 Gas distribution system Chapter 16 Gas compression stations Chapter 17 Oil pump houses Chapter 18 Oil storage systems Chapter 19 Refineries, Chapter 20 Petrochemical units, Chapter 21 Refinery Maintenance Chapter 22 Access roads, railways and runways Chapter 23 Wastewater collection, treatment and transmission
systems Chapter 24 Electrical installations Chapter 25 Water Pipelines Chapter 26 Offsite works
Update period: Quarterly
Countries are categorized by regions and their location factors for each resources, and line items have been calculated and presented in this volume. The factors are calculated based on the location productivity factors and inflation effects. Below are the content of this Volume:
Volume V Location factors
Chapter 01 USA and CANADA Chapter 02 Africa Chapter 03 Asia and pacific area Chapter 04 West Europe Chapter 05 East Europe and CIS countries Chapter 06 Middle East
Update period: Quarterly
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
Suppliers have been categorized based on the products and services which they offer. The database is classified for above mentioned regions and includes names, contact
details, list of products and services, and average catalog price of materials for a specified year
Volume V Suppliers database
Update period: Quarterly
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
Oil & Gas industry studies have shown that sometimes over 30% of the direct costs for the standard procurement and installation of oil, Gas and chemical process plants are attributed to the mechanical component.
Chapter 3, Mechanical Equipment
Chapter 3 of volume I of NoDoC datasheets presents technical specifications and parameters of materials that are considered on cost data of mechanical equipment employed to upstream, midstream and downstream both in onshore and offshore.
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
Contents 3000-Mechanical Equipment ...................................................................................................................... 13
What is this document ............................................................................................................................ 13
30001-Heat Exchangers .......................................................................................................................... 15
30001001- Air Cooler .......................................................................................................................... 18
30001002-Shell/Tube, Fixed/U ........................................................................................................... 19
30001003-Shell/Tube, Floating Head ................................................................................................. 20
30001004-Shell/Tube, Fixed Tubesheet ............................................................................................. 21
30001005-Shell/Tube, Finned-tube,Floating-head ............................................................................. 22
30001006-Gasketed Plate exchanger ................................................................................................. 23
30001007-Shell/Tube, Welded Plate exchanger ................................................................................ 24
30001008-Spiral Plate Exchanger ....................................................................................................... 25
30001009-Flat Plate Exchanger .......................................................................................................... 26
30001010-Scraped wall Exchanger ..................................................................................................... 27
30001011-Spiral Tube Exchanger ....................................................................................................... 28
30001012-Double Pipe........................................................................................................................ 29
30002-Evaporator ................................................................................................................................... 30
30002001-Evaporator, Agitated Film .................................................................................................. 33
30002002-Evaporator, Falling Film ..................................................................................................... 34
30002003-Evaporator, Forced Circulation .......................................................................................... 35
30002004-Evaporator, Horizontal Tube ............................................................................................. 36
30002005-Evaporator, Vertical Tube .................................................................................................. 37
30003-Condenser .................................................................................................................................... 38
30003001-Condenser, Vertical Tube .................................................................................................. 41
30003002-Multi jet spray-type Condenser ......................................................................................... 42
30003003-Multi jet Barometric Condenser ........................................................................................ 43
30004-Vaporizer ..................................................................................................................................... 44
30004001-Vaporizer, Jacketed Vessel ................................................................................................ 47
30004002-Vaporizer, Jacketed Vessel with internal coil .................................................................... 48
30005-Separator ..................................................................................................................................... 49
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3,Part one
Mechanical Equipment
Page 2 of 279
30005001-Air Sweep Separator .......................................................................................................... 56
30005002-Cyclone, Wet, Ceramic Lined ............................................................................................. 57
30005003-Cyclone, Wet, Urethane Lined ........................................................................................... 58
30005004-Cyclone, Wet, Rubber Lined CI .......................................................................................... 59
30005005-Cyclone, Wet, Rubber Lined FRP ....................................................................................... 60
30005006-Cyclone, Wet, NiHard Lined ............................................................................................... 61
30005007-Gas Liquid Separator, Vane Type ....................................................................................... 62
30005008-Screw Classifier, 1-Screw ................................................................................................... 63
30005009-Screw Classifier, 2-Screw ................................................................................................... 64
30005010-Tray Column, Bubble-cap Tray........................................................................................... 65
30005011-Tray Column, Valve Tray .................................................................................................... 66
30005012-Tray Column, Sieve Tray .................................................................................................... 67
30005013-Tray Column, TurbogrideTray ............................................................................................ 68
30005014-Distillation Column, Bubble-plate tower ........................................................................... 69
30005015-Distillation Column, Sieve-tray tower ................................................................................ 70
30005016-Tray Distillation Column,Turbogrid tray tower .................................................................. 71
30005017-Packed Column .................................................................................................................. 72
30006-Pumps .......................................................................................................................................... 73
30006001-Centrifugal Pump ............................................................................................................... 82
30006002-Reciprocating Pump ........................................................................................................... 83
30006003-Vacuum Pump.................................................................................................................... 84
30006004-Rotary, Gear Pump ............................................................................................................ 85
30006005-Vertical Pump .................................................................................................................... 86
30006006-Sump and Well Pump ........................................................................................................ 87
30006007-Slurry Pump ....................................................................................................................... 88
30006008-Diaphragm, Duplex ............................................................................................................ 89
30006009-Diaphragm, Simplex ........................................................................................................... 90
30006010-Piston Pump ....................................................................................................................... 91
30006011-Progressive Cavity Pump ................................................................................................... 92
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3,Part one
Mechanical Equipment
Page 3 of 279
30006012-Rotary, Sliding Vane Pump ................................................................................................ 93
30007-Storage Tank ................................................................................................................................ 94
30007001-API, Cone Roof, Field Fabrication Tank .............................................................................. 98
30007002-Tank API, Cone Roof, Shop Fabrication Tank ..................................................................... 98
30007003-API, Floating Roof Tank ...................................................................................................... 98
30007004-Horizontal Fuel Storage Tank ............................................................................................. 98
30007005-Horizontal Round Ends Tank .............................................................................................. 98
30007006-Vertical Cone Roof, Flat Bottom Tank ............................................................................... 98
30007007-Vertical Cone Top & Bottom Tank ..................................................................................... 98
30007008-Vertical Shop Fabrication ................................................................................................... 98
30007009-Field-erected Tank ............................................................................................................. 98
30007010-Bullet Tank ......................................................................................................................... 98
30007011-Settle Tank ......................................................................................................................... 98
30007012-Off-Spec Tank ..................................................................................................................... 98
30008-Pressure Vessel .......................................................................................................................... 100
30008001-Column, No Internal ........................................................................................................ 107
30008002-Horizontal Vessel, No Internal ......................................................................................... 107
30008003-Sphere Vessel ................................................................................................................... 107
30008004-Stabilizer Column ............................................................................................................. 107
30008005-K.O Drum ......................................................................................................................... 107
30008006-Air Receiver ...................................................................................................................... 107
30008007-Closed Drain Vessel.......................................................................................................... 107
30008008-Still Column ...................................................................................................................... 107
30008009-Stripping Column ............................................................................................................. 107
30008010-Surge Drum ...................................................................................................................... 107
30008011-Flash Drum ....................................................................................................................... 107
30008012-Sump Drum ...................................................................................................................... 107
30008013-Suction Drum ................................................................................................................... 107
30008014-Settle Vessel ..................................................................................................................... 107
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3,Part one
Mechanical Equipment
Page 4 of 279
30008015-Pig Launcher .................................................................................................................... 107
30008016-Pig receiver ...................................................................................................................... 107
30008017-Manifolds ......................................................................................................................... 107
30009-Reactor ....................................................................................................................................... 109
30009001-Autoclave Reactor............................................................................................................ 116
30009002-Electro winning Cell ......................................................................................................... 116
30009003-Inoculum Tank ................................................................................................................. 116
30009004-Jacketed & Agitated Reactor ........................................................................................... 116
30009005-Jacketed, Non-Agitated Reactor ...................................................................................... 116
30009006-Mixer-Settler .................................................................................................................... 116
30009007-Propeller mixer, Fixed ...................................................................................................... 116
30009008-Propeller mixer, Portable ................................................................................................ 116
30010-Blower ........................................................................................................................................ 119
30010001-Axial Blower ..................................................................................................................... 119
30010002-Centrifugal Blower ........................................................................................................... 119
30010003-Rotary Blower .................................................................................................................. 119
30010004-Rotary,2 Rotor Blower ..................................................................................................... 119
30010005-Rotary, Sliding Vane Blower ............................................................................................ 119
30010006-Rotary, Turbo Blower ....................................................................................................... 119
30010007-Turbo Blower ................................................................................................................... 119
30010008-Heavy Duty Blower .......................................................................................................... 119
30011-Fan ............................................................................................................................................. 121
30011001-Vane-Axial Fan ................................................................................................................. 121
30011002-Tube-Axial Fan ................................................................................................................. 121
30011003-Centrifugal, Backward Curved Fan .................................................................................. 121
30011004-Centrifugal, Radial, to 22 in H2O Fan .............................................................................. 121
30011005-Centrifugal, Radial, to 32 in H2O Fan .............................................................................. 121
30012-Filter ........................................................................................................................................... 124
30012001-Belt Filter ......................................................................................................................... 125
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3,Part one
Mechanical Equipment
Page 5 of 279
30012002-Cartridge Filter ................................................................................................................. 126
30012003-Disc Filter ......................................................................................................................... 127
30012004-Drum Filter ....................................................................................................................... 128
30012005-Gravity Filter .................................................................................................................... 129
30012006-Leaf Filter ......................................................................................................................... 130
30012007-Pan Filter .......................................................................................................................... 131
30012008-Plate and Frame Filter ..................................................................................................... 132
30012009-Table Filter ....................................................................................................................... 133
30012010-Tube Filter ........................................................................................................................ 134
30012011-Centrifugal filter, continuous solid bowl ......................................................................... 135
30012012-Sand Filter ........................................................................................................................ 136
30012013-Charcoal Filter .................................................................................................................. 137
30013-Dryer .......................................................................................................................................... 138
30013001-Agitated, Hollow-Flight Dryer .......................................................................................... 139
30013002-Drum, Double, Atmospheric Dryer .................................................................................. 140
30013003-Drum, Double, Vacuum Dryer ......................................................................................... 141
30013004-Drum, Roto-Louver w/ Fan Dryer .................................................................................... 142
30013005-Drum, Single, Atmospheric Dryer .................................................................................... 143
30013006-Drum, Single, Vacuum Dryer ........................................................................................... 144
30013007-Rotary, Direct Gas Fired Dryer ......................................................................................... 145
30013008-Rotary, Indirect Gas Fired Dryer ...................................................................................... 146
30013009-Rotary, Hot air Dryer ........................................................................................................ 147
30013010-Rotary, Vacuum Dryer ..................................................................................................... 148
30013011-Tray, Atmospheric Dryer .................................................................................................. 149
30013012-Tray, Vacuum Dryer ......................................................................................................... 150
30013013-Pan Dryer ......................................................................................................................... 151
30013014-Vacuum Tumble Dryer ..................................................................................................... 152
30013015-Vacuum Shelf Dryer ......................................................................................................... 153
30013016-Dyna-Cone Vacuum Dryer ................................................................................................ 154
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3,Part one
Mechanical Equipment
Page 6 of 279
30013017-Spray Dryer ...................................................................................................................... 155
30014-Heater ........................................................................................................................................ 156
30014001-Box Fired Heater .............................................................................................................. 157
30014002-Cylindrical Fired Heater ................................................................................................... 158
30014003-Dowtherm Fired Heater ................................................................................................... 159
30014004-Portable Fired Heater ...................................................................................................... 160
30014005-Solution Heater ................................................................................................................ 161
30014006-Coiled Heater ................................................................................................................... 162
30014007-Bayonet Heater ................................................................................................................ 163
30014008-Electric Immersion Heater ............................................................................................... 164
30014009-Direct Fire Heater ............................................................................................................ 165
30015-Gas Scrubber .............................................................................................................................. 166
30015001-Impingement ................................................................................................................... 167
30015002-Venturi Scrubber ............................................................................................................. 168
30015003-Wet Centrifugal Scrubber ................................................................................................ 169
30015004-Wet Dynamic Scrubber .................................................................................................... 170
30016-Size Reduction ........................................................................................................................... 171
30016001-Ball Mill ............................................................................................................................ 171
30016002-Vibrating Ball Mill ............................................................................................................ 171
30016003-Ball Mill Dry Grinding, Closed circuit with air classifiers ................................................. 171
30016004-Ball Mill Dry Grinding, Open Circuit ................................................................................. 171
30016005-Ball Mill Wet Grinding, Closed circuit with air classifiers ................................................ 171
30016006-Ball Mill Wet Grinding, Open circuit ................................................................................ 171
30016007-AG/SAG Mill Dry Grinding, Closed circuit with air classifiers .......................................... 171
30016008-AG/SAG Mill Dry Grinding, Open circuit .......................................................................... 171
30016010-AG/SAG Mill Wet Grinding, Open circuit ......................................................................... 172
30016011-Cage Mill .......................................................................................................................... 172
30016012-Cone Crusher ................................................................................................................... 172
30016013-Gyratory Crusher ............................................................................................................. 172
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3,Part one
Mechanical Equipment
Page 7 of 279
30016014-Jaw Crusher...................................................................................................................... 172
30016015-Roll Crusher ..................................................................................................................... 172
30016016-Pebble Mill ....................................................................................................................... 172
30016017-Rod Mill ............................................................................................................................ 172
30016018-Pulverizer ......................................................................................................................... 172
30016019-Rolling Grinder ................................................................................................................. 172
30016020-Rotary Cutter ................................................................................................................... 172
30017-Dust Collector ............................................................................................................................ 174
30017001-Bag House ........................................................................................................................ 175
30017002-Centrifugal Scrubber ........................................................................................................ 176
30017003-Cyclone ............................................................................................................................ 177
30017004-Electrostatic Precipitator ................................................................................................. 178
30017005-Gravity Spray Scrubber .................................................................................................... 179
30017006-Impingement Scrubber, Wet ........................................................................................... 180
30017007-Scrubber, Wet .................................................................................................................. 181
30017008-Venturi ............................................................................................................................. 182
30017009-Wet Dynamic Scrubber .................................................................................................... 183
30017010-Louver Collector ............................................................................................................... 184
30017011-Multiple Cyclone .............................................................................................................. 185
30017012-Fabric Filter Dust Collector .............................................................................................. 186
30017013-Submerged nozzle scrubber ............................................................................................ 187
30018-Bin .............................................................................................................................................. 188
30018001-Cone Bottom Bin .............................................................................................................. 189
30018002- Hopper with Bottom, Bolter ........................................................................................... 190
30019-Material Handling Equipment ................................................................................................... 191
30019001-Bin Activator, Vibrating .................................................................................................... 192
30019002-Feeder, Rotary Table ....................................................................................................... 193
30019003-Rail Car Dumper ............................................................................................................... 194
30019004-Rotary Air Lock ................................................................................................................. 195
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3,Part one
Mechanical Equipment
Page 8 of 279
0019005-Slide Gate ........................................................................................................................... 196
30019006-Chutes .............................................................................................................................. 197
30020-Blender ...................................................................................................................................... 198
30020001-Kneader, Stationary, Double Arm Blender ...................................................................... 199
30020002-Kneader, Tilting, Double Arm Blender ............................................................................. 200
30020003-Kneader, Tilting, Vacuum, Double Arm Blender .............................................................. 201
30020004-Ribbon Blender ................................................................................................................ 202
30020005-Spiral Ribbon Blender ...................................................................................................... 203
30020006-Rotary, Double Cone Blender .......................................................................................... 204
30020007-Rotary, Twin Shell Blender............................................................................................... 205
30020008-Sigma, Double Arm Blender ............................................................................................. 206
30020009-Two Roll Blender .............................................................................................................. 207
30020010-Muller Blender ................................................................................................................. 208
30020011-Roll-type extruder ............................................................................................................ 209
30020012-Screw Extruder ................................................................................................................ 210
30020013-Screw Press ...................................................................................................................... 211
30020014-Pug Mill Extruder ............................................................................................................. 212
30021-Incinerator ................................................................................................................................. 213
30021001-Catalytic Incinerator ........................................................................................................ 214
30021002-Cylindrical Incinerator ...................................................................................................... 215
30021003-Direct Flame Incinerator .................................................................................................. 216
30021004-Hearth Incinerator ........................................................................................................... 217
30021005-Multi Hearth Incinerator.................................................................................................. 218
30021006-Rotary Kiln ....................................................................................................................... 219
30022-Centrifuge .................................................................................................................................. 220
30022001-Centrifugal Separator, Bottom Driven ............................................................................. 221
30022002-Centrifugal Separator, Horizontal, Auto. Batch ............................................................... 222
30022003-Centrifugal Separator, Top Suspended ............................................................................ 223
30022004-Centrifugal Separator, Vertical, Auto. Batch ................................................................... 224
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3,Part one
Mechanical Equipment
Page 9 of 279
30022005-Oscillating Screen ............................................................................................................ 225
30022006-Sedimentation, Scroll Conveyor ...................................................................................... 226
30022007-Solid Bowl w/o motor ...................................................................................................... 227
30022008-Disc-nozzle Centrifuge ..................................................................................................... 228
30022009-Sharpless super D Centrifuge .......................................................................................... 229
30022010-ATM suspended basket centrifuge .................................................................................. 230
30022011-Screen Bowl ..................................................................................................................... 231
30022012-Pusher Type ..................................................................................................................... 232
30023-Classifier ..................................................................................................................................... 233
30023001-Cyclone, Turbo Screen Classifier ...................................................................................... 234
30023002-Jig, Duplex Classifier ........................................................................................................ 235
30023003-Rake Classifier .................................................................................................................. 236
30023004-Spiral, Duplex ................................................................................................................... 237
30023005-Spiral, Simplex ................................................................................................................. 238
30024-Screen ........................................................................................................................................ 239
30024001-DSM Screen...................................................................................................................... 240
30024002-Grizzly, Vibrating Screen .................................................................................................. 241
30024003-Rotary Trommel Screen ................................................................................................... 242
30024004-Stationary Screen ............................................................................................................. 243
30024005-Vibratory, 1-Deck Screen ................................................................................................. 244
30024006-Vibratory, 2-Deck Screen ................................................................................................. 245
30024007-Vibratory, 3-Deck Screen ................................................................................................. 246
30025-Ejector ........................................................................................................................................ 247
30025001-Eductor Mixer .................................................................................................................. 248
30025002-Ejector .............................................................................................................................. 249
30025003-Static Mixer, Jacketed ...................................................................................................... 250
30025004-Static Mixer, Non Jacketed .............................................................................................. 251
30025005-Steam-jet, Four Stage with two barometric condenser .................................................. 252
30025006-Steam-jet, Two Stage, Non-condensing .......................................................................... 253
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3,Part one
Mechanical Equipment
Page 10 of 279
30025007-Steam-jet, One-stage, Non-condensing .......................................................................... 254
30026-Agglomerators ........................................................................................................................... 255
30026001-Disk With motor Agglomerator ....................................................................................... 255
30027-Agitator ...................................................................................................................................... 256
30027001-Impeller, Anchor, Top Entering Agitator ......................................................................... 256
30027002-Propeller, Side Entering Agitator ..................................................................................... 256
30027003-Propeller, Top Entering Agitator ...................................................................................... 256
30027004-Propeller, Closed Tank, Agitator ...................................................................................... 256
30027005-Propeller, Open Tank, Agitator ........................................................................................ 256
30027006-Turbine, Batch Reactor Agitator ...................................................................................... 256
30027007-Turbine, Fermentation Agitator ...................................................................................... 256
30027008-Turbine, Single Impeller ................................................................................................... 256
30027009-Turbine, Dual Impeller ..................................................................................................... 256
30027010-Turbine, Top Entering Agitator ........................................................................................ 256
30028-Conveyor .................................................................................................................................... 258
30028001-Apron Conveyor ............................................................................................................... 258
30028003-Belt, Open Conveyor ........................................................................................................ 258
30028004-Belt, Overland, Installed Conveyor .................................................................................. 258
30028005-Pneumatic Conveyor ........................................................................................................ 258
30028006-Roller Conveyor ............................................................................................................... 258
30028007-Screw Conveyor ............................................................................................................... 258
30028008-Vibrating Conveyor .......................................................................................................... 258
30029-Crystallizer ................................................................................................................................. 260
30029001-Batch, Atmospheric, Crystallizer ...................................................................................... 260
30029002-Batch, Vacuum, Crystallizer ............................................................................................. 260
30030-Cooling and Refrigeration .......................................................................................................... 261
30030001-Air Conditioner Package .................................................................................................. 261
30030002-Cooling Pond .................................................................................................................... 262
30030003-Cooling Tower, Forced Draft ............................................................................................ 263
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3,Part one
Mechanical Equipment
Page 11 of 279
30030004-Cooling Tower, Induced Draft .......................................................................................... 264
30030005-Refrigeration .................................................................................................................... 265
30031-Reboiler ...................................................................................................................................... 266
30031001-Kettle Reboiler ................................................................................................................. 274
30032-Compressor ................................................................................................................................ 275
30032001-Centrifugal Compressor ................................................................................................... 275
30032002-Centrifugal-Rotary Compressor ....................................................................................... 275
30032003-Centrifugal-Turbine Compressor ..................................................................................... 275
30032004-Centrifugal-Motor Compressor ....................................................................................... 275
30032005-Axial Compressor ............................................................................................................. 275
30032006-Reciprocating, single acting Compressor ......................................................................... 275
30032007-Reciprocating, double acting Compressor ....................................................................... 275
30032008-Reciprocating, Diaphragm Compressor ........................................................................... 275
30032009-Reciprocating-Gas Engine Compressor ............................................................................ 275
30032010-Reciprocating-Motor Compressor ................................................................................... 275
30032011-Reciprocating-Steam Compressor ................................................................................... 275
30032012-Rotary, lobe Compressor ................................................................................................. 275
30032013-Rotary, liquid ring Compressor ........................................................................................ 275
30032014-Rotary, Screw Compressor .............................................................................................. 275
30032015-Rotary, scroll Compressor................................................................................................ 275
30032016-Rotary, vane Compressor ................................................................................................ 275
30032017-Reciprocating, Water Cooled Compressor ...................................................................... 276
30032018-Reciprocating, Water Cooled Compressor ...................................................................... 276
30032019-Reciprocating, Water Cooled Compressor ...................................................................... 276
30032020-Reciprocating, Air Cooled Compressor ............................................................................ 276
30032021-Rotary Sliding Vane Compressor ..................................................................................... 276
30032022-Rotary, Helical Screw Compressor ................................................................................... 276
30032023-Rotary, Straight Lobe Compressor ................................................................................... 276
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3,Part one
Mechanical Equipment
Page 12 of 279
This page is left internally blank
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3,Part one
Mechanical Equipment
Page 13 of 279
3000-Mechanical Equipment
What is this document This document presents the costing datasheets of NoDoC material / equipment database. Each datasheet have two separate parts:
1- Material: This part indicates the list of standard materials which are used in NoDoC Cost Estimation.
2- Other parameters: Parameters are presented in a rectangular shape with several rows. Materials are based on the standards like ASME, API, ANSI, NACE, … which are shown for each equipment separately
Example:
Gas Flow, m3/min Min. 8
Max. 850 Step: 20
Unit of Measurement
Parameter range
Minimum value in Database
Maximum value in Database
Parameter name
Gas Flow, m3/min Min. 8
Max. 850 Step: 20
Unit of Measurement
Parameter range
Minimum value in Database
Maximum value in Database
Parameter name
Header configuration
Pipe & bend
Plug box
Cover plate
Parameter name
Parameter types
lining
Yes
No
Parameter name Databases have two series, first with lining, Yes, second with No lining
Incremental value between each record For i
nformatio
n only
,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3,Part one
Mechanical Equipment
Page 14 of 279
Each datasheet contains the parameters which have been considered for costing of equipment. In some cases the parameters of equipment have fewer variations per types; in these cases only one datasheet is presented for all types. List of technical standards which are used in NoDoC for costing, have been presented on appendix I of these document.
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3,Part one
Mechanical Equipment
Page 15 of 279
30001-Heat Exchangers Material Specifications which is used in NoDoC for Heat exchangers
Nominal Composition
ASME Code
UNS Number
C Stl , Wld Tube SA-334-6 SA-214
K03006 K01807
C Stl , Smls Tube SA-179 SA-192
K01200 K01201
1 1/4 Cr - 1/2 Mo-Si, Smls tube SA-213-T11 (SA-199-T11) K11597
2 1/4 Cr - 1 Mo, Smls Tube SA-213-T22 (SA-199-T22) K21590
5 Cr - 1/2 Mo, Smls Tube SA-213-T5 (SA-199-T5) K41545
304 S.S. , Smls tube SA-213 TP304 S30400 304 S.S. ,Wld tube SA-249 TP304 S30400 304L S.S. ,Smls tube SA-213 TP304L S30403 304L S.S. ,Wld tube SA-249 TP304L S30403 316 S.S. ,Smls tube SA-213 TP316 S31600 316 S.S. ,Wld tube SA-249 TP316 S31600 316L S.S. ,Smls tube SA-213 TP316L S31603 316L S.S., Wld tube SA-249 TP316L S31603 321 S.S., Smls tube SA-213 TP321 S32100 321 S.S. ,Wld tube SA-249 TP321 S32100 347 S.S. ,Smls tube SA-213 TP347 S34700 347 S.S. ,Wld tube SA-249 TP347 S34700 410 S.S. (Ferritic), Smls or Wld tube SA-268 TP410 S41000 Copper tube SB-111 C12200 Admiralty Brass, Smls tube SB-111 C44300 , C44400, C44500 70-30 CuNi, Smls tube SB-111 C71500 90-10 CuNi, Smls tube SB-111 C70600 Monel 400, Smls Tube SB-163 N04400 Inconel 600, Smls tube SB-163 N06600 Inconel 625, Smls tube SB-444 N06625
Hastelloy C-22 SB-622 (seamless) SB-626 (welded) N06022
Hastelly C-276 SB-622 (seamless) SB-626 (welded) N10276
Duplex 2205 SA-789 SA-790
S31808 S32205
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3,Part one
Mechanical Equipment
Page 16 of 279
UNS ASTM EN no. W.-nr AFNOR Duplex stainless steels
S31500 - 1.4424 1.4417 Z2CND18-05-03 S31803/S32205 - 1.4462 - Z2CND22-05-03
S32304 - 1.4362 1.4362 Z2NC23-04AZ S32707 - - - - S32750 - 1.441 - -
High-alloy austenitic stainless steels and nickel alloys N06600 Alloy 600 - 2.4816 - N06690 Alloy 690 2.4642*** 2.4642 NC30FE(RCCM) N08825 Alloy 825 - 2.4858 - N08028 - 1.4563 1.4563 - N08904 - 1.4539 1.4539 Z1NCDU25-20-4 S31254 - 1.4547 (1.4529)** -
Austenitic stainless steels S30403/S30400 304L/304 1.4306/1.4301 1.4306/1.4301 Z2CN18-10 S31603/S31600 316L/316 1.4435/1.4436 1.4435/1.4436 Z2CND17-13
S31635 316Ti 1.4571 1.4571 (Z6CNDT17-12)** S32100/S32109 321/321H 1.4541/1.4940 1.4541/1.4878 (Z6CNT18-10)**
Titanium Pure titanium and titanium grades: 1, 2, 3, 4, 7, 9, 11, 12, 16, 17, 26 and 28
Zirconium Zirconium 702 (ZR-702) A-789 SA-789 - - - A-789 SA-789 10216-5 VD TÜV Blatt 508 - A-789 SA-789 10216-5 VD TÜV Blatt 418 NFA 49-217 A-789 SA-789 10216-5 - - A-789 SA-789 - - NFA 49-217
B-163 B-167 SB-163 SB-167 - VD TÜV Blatt 305 - B-163 B-167 SB-163 SB-167 - - - B-163 B-423 SB-163 SB-423 10216-5 - -
B-668 SB-668 10216-5 VD TÜV Blatt 483 - A-269 SB-677 10216-5 VD TÜV Blatt 421 NFA 49-217
A-213 A-269 - 10216-5 - - A-213 - - DIN 17458 NFA 49-217
A-213 A-269 SA-213 10216-5 DIN 17458 NFA 49-217
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3,Part one
Mechanical Equipment
Page 17 of 279
Material of construction , H.E parts A 105 A 420 GR.WPL 6 API 5L GRADE C NITRL A 105 GALVANIZED A 516 GR.65 B 444 GR.N006625 SS304 A 106 A 516 GR.X70 B 564 GR. N06625 SS316
A 182 GR. F316L A 53 B366-WPNCMC (UNSN 06625) SS321
A 193 GR.B7 A 671 GR.CC 60 CLASS22 C 20 SS347 A 194 GR.2H A 694 F 53 HASTB SS410 A 20 A 694 F 65 HASTC SS6LC A 216 GR.WCB A 694 F60 HASTELLOY SS304L A 234 GR.WPB A 860 GR. WPHY 52 HYPLN SS316L A 283 GR.C A 860 GR. WPHY 65 I800 TFELS A 312 TP 316L A 860 GR.WPHY60 IN3LC TFESS A 320 GR. L7 A333A INCNL TI A 350 GR. LF2 CLASS 1 A333C INCOLOY ALLOY X42W A 350 GR. LF2 CLASS 1 A335B MONEL X46W A 351 GR. CF8M A335C MONEL ALLOY X52W A 352 GR. LCB A335D NEPNE X56W A 358 GR.316L CL.1 A335F NI200 X60W A 36 A335G NI201 X65W A 360 GR. LF2 CLASS 1 API 5L GRADE A NICKLE ZR A 403 GR.WP316L API 5L GRADE B NICKLE ALLOY
UNS ASTM EN no. W.-nr AFNOR A-213 A-269 SA-213 10216-5 DIN 17458 NFA 49-217 A-213 A-269 SA-213 10216-5 DIN 17458 NFA 49-217
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3,Part one
Mechanical Equipment
Page 18 of 279
30001001- Air Cooler
Database name Air Cooled Heat Exchanger Level of estimate Detailed
Database code 30001001 Version 3.0.306
Standard API 661 Date Feb. 2014
Air Cooler Costing Parameters
Number of Records: 17,443,200
Design Standards API 661 TEMA R TEMA C
ASME Section VIII, Div. 1 Canadian Standards
NACE MR0175 UBC Building Codes
ATEX CE
PED
Header configuration
Pipe & bend
Plug box
Cover plate
Area
Min 3 m^2 Max. 14000 m^2
Step: 300
Finning type Extruded/Embedded
L-footed
Internal Pressure Full Vacuum Min. 100 psi Max. 900 psi
step: 50
fan Type Horizontal fan
Vertical fan Multiple fan Forced draft
Induced draft
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3,Part one
Mechanical Equipment
Page 19 of 279
30001002-Shell/Tube, Fixed/U
Database name Shell/Tube, Fixed/U Level of estimate Detailed
Database code 30001002 Version 3.0.306
Standard API 660 Date Feb. 2014
Shell/Tube, Fixed/U Costing Parameters
Number of Records: 3,488,640
Header configuration Pipe & bend
Plug box Cover plate
Design Standards API 660 TEMA R TEMA C
ASME Section VIII, Div. 1 Canadian Standards
NACE MR0175 UBC Building Codes
ATEX CE
PED
Area Min 5 m^2
Max. 14000 m^2 Step: 300
Internal Pressure Full Vacuum Min. 100 psi Max. 900 psi
step: 50
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3,Part one
Mechanical Equipment
Page 20 of 279
30001003-Shell/Tube, Floating Head
Database name Shell/Tube, Floating Head Level of estimate Detailed
Database code 30001003 Version 3.0.306
Standard API 660 Date Feb. 2014
Shell/Tube, Floating Head Costing Parameters
Number of Records: 3,488,640
Header configuration Pipe & bend
Plug box Cover plate
Design Standards API 660 TEMA R TEMA C
ASME Section VIII, Div. 1 Canadian Standards
NACE MR0175 UBC Building Codes
ATEX CE
PED
Area Min 0.5 m^2
Max. 14000 m^2 Step: 300
Internal Pressure Full Vacuum Min. 100 psi Max. 900 psi
step: 50
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3,Part one
Mechanical Equipment
Page 21 of 279
30001004-Shell/Tube, Fixed Tubesheet
Database name Shell/Tube, Fixed Tubesheet Level of estimate Detailed
Database code 30001004 Version 3.0.306
Standard API 660 Date Feb. 2014
Shell/Tube, Fixed Tubesheet Costing Parameters
Number of Records: 3,488,640
Header configuration Pipe & bend
Plug box Cover plate
Design Standards API 660 TEMA R TEMA C
ASME Section VIII, Div. 1 Canadian Standards
NACE MR0175 UBC Building Codes
ATEX CE
PED
Area Min 0.5 m^2
Max. 14000 m^2 Step: 300
Internal Pressure Full Vacuum Min. 100 psi Max. 900 psi
step: 50
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3,Part one
Mechanical Equipment
Page 22 of 279
30001005-Shell/Tube, Finned-tube,Floating-head
Database name Shell/Tube, Finned-tube, Floating-head Level of estimate Detailed
Database code 30001005 Version 3.0.306
Standard API 660 Date Feb. 2014
Shell/Tube, Finned-tube,Floating-head Costing Parameters
Number of Records: 3,488,640
Header configuration Pipe & bend
Plug box Cover plate
Design Standards API 660 TEMA R TEMA C
ASME Section VIII, Div. 1 Canadian Standards
NACE MR0175 UBC Building Codes
ATEX CE
PED
Area Min 0.5 m^2
Max. 14000 m^2 Step: 300
Internal Pressure Full Vacuum Min. 100 psi Max. 900 psi
step: 50
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3,Part one
Mechanical Equipment
Page 23 of 279
30001006-Gasketed Plate exchanger
Database name Gasketed Plate exchanger Level of estimate Detailed
Database code 30001006 Version 3.0.306
Standard API 660 Date Feb. 2014
Gasketed Plate exchanger Costing Parameters
Number of Records: 3,488,640
Header configuration Pipe & bend
Plug box Cover plate
Design Standards API 660 TEMA R TEMA C
ASME Section VIII, Div. 1 Canadian Standards
NACE MR0175 UBC Building Codes
ATEX CE
PED
Area Min 0.5 m^2
Max. 14000 m^2 Step: 300
Internal Pressure Full Vacuum Min. 100 psi Max. 900 psi
step: 50
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3,Part one
Mechanical Equipment
Page 24 of 279
30001007-Shell/Tube, Welded Plate exchanger
Database name Welded Plate exchanger Level of estimate Detailed
Database code 30001007 Version 3.0.306
Standard API 660 Date Feb. 2014
Welded Plate exchanger Costing Parameters
Number of Records: 3,488,640
Header configuration Pipe & bend
Plug box Cover plate
Design Standards API 660 TEMA R TEMA C
ASME Section VIII, Div. 1 Canadian Standards
NACE MR0175 UBC Building Codes
ATEX CE
PED
Area Min 0.5 m^2
Max. 14000 m^2 Step: 300
Internal Pressure Full Vacuum Min. 100 psi Max. 900 psi
step: 50
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3,Part one
Mechanical Equipment
Page 25 of 279
30001008-Spiral Plate Exchanger
Database name Spiral Plate Exchanger Level of estimate Detailed
Database code 30001008 Version 3.0.306
Standard API 660 Date Feb. 2014
Spiral Plate Exchanger Costing Parameters
Number of Records: 3,488,640
Header configuration Pipe & bend
Plug box Cover plate
Design Standards API 660 TEMA R TEMA C
ASME Section VIII, Div. 1 Canadian Standards
NACE MR0175 UBC Building Codes
ATEX CE
PED
Area Min 0.5 m^2
Max. 14000 m^2 Step: 300
Internal Pressure Full Vacuum Min. 100 psi Max. 900 psi
step: 50
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3,Part one
Mechanical Equipment
Page 26 of 279
30001009-Flat Plate Exchanger
Database name Flat Plate Exchanger Level of estimate Detailed
Database code 30001009 Version 3.0.306
Standard API 660 Date Feb. 2014
Flat Plate Exchanger Costing Parameters
Number of Records: 3,488,640
Header configuration Pipe & bend
Plug box Cover plate
Design Standards API 660 TEMA R TEMA C
ASME Section VIII, Div. 1 Canadian Standards
NACE MR0175 UBC Building Codes
ATEX CE
PED
Area Min 0.5 m^2
Max. 14000 m^2 Step: 300
Internal Pressure Full Vacuum Min. 100 psi Max. 900 psi
step: 50
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3,Part one
Mechanical Equipment
Page 27 of 279
30001010-Scraped wall Exchanger
Database name Scraped wall Exchanger Level of estimate Detailed
Database code 30001010 Version 3.0.306
Standard API 660 Date Feb. 2014
Scraped wall Exchanger Costing Parameters
Number of Records: 3,488,640
Header configuration Pipe & bend
Plug box Cover plate
Design Standards API 660 TEMA R TEMA C
ASME Section VIII, Div. 1 Canadian Standards
NACE MR0175 UBC Building Codes
ATEX CE
PED
Area Min 0.5 m^2
Max. 14000 m^2 Step: 300
Internal Pressure Full Vacuum Min. 100 psi Max. 900 psi
step: 50
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3,Part one
Mechanical Equipment
Page 28 of 279
30001011-Spiral Tube Exchanger
Database name Spiral Tube Exchanger Level of estimate Detailed
Database code 30001011 Version 3.0.306
Standard API 660 Date Feb. 2014
Spiral Tube Exchanger Costing Parameters
Number of Records: 3,488,640
Header configuration Pipe & bend
Plug box Cover plate
Design Standards API 660 TEMA R TEMA C
ASME Section VIII, Div. 1 Canadian Standards
NACE MR0175 UBC Building Codes
ATEX CE
PED
Area Min 0.5 m^2
Max. 14000 m^2 Step: 300
Internal Pressure Full Vacuum Min. 100 psi Max. 900 psi
step: 50
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3,Part one
Mechanical Equipment
Page 29 of 279
30001012-Double Pipe
Database name Double Pipe Heat Exchanger Level of estimate Detailed
Database code 30001012 Version 3.0.306
Standard API 663 Date Feb. 2014
Double Pipe Costing Parameters
Number of Records: 3,488,640
Header configuration Pipe & bend
Plug box Cover plate
Design Standards API 663 TEMA R TEMA C
ASME Section VIII, Div. 1 Canadian Standards
NACE MR0175 UBC Building Codes
ATEX CE
PED
Internal Pressure Full Vacuum Min. 100 psi Max. 900 psi
step: 50 Area
Min 10 m^2
Max. 14000 m^2
Step: 300
Type Finning type Extruded/Embedded
L-footed
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3,Part one
Mechanical Equipment
Page 30 of 279
30002-Evaporator Material Specifications which is used in NoDoC for Evaporator Nominal
Composition ASME Code
UNS Number
C Stl , Wld Tube SA-334-6 SA-214
K03006 K01807
C Stl , Smls Tube SA-179 SA-192
K01200 K01201
1 1/4 Cr - 1/2 Mo-Si, Smls tube SA-213-T11 (SA-199-T11) K11597
2 1/4 Cr - 1 Mo, Smls Tube SA-213-T22 (SA-199-T22) K21590
5 Cr - 1/2 Mo, Smls Tube SA-213-T5 (SA-199-T5) K41545
304 S.S. , Smls tube SA-213 TP304 S30400 304 S.S. ,Wld tube SA-249 TP304 S30400 304L S.S. ,Smls tube SA-213 TP304L S30403 304L S.S. ,Wld tube SA-249 TP304L S30403 316 S.S. ,Smls tube SA-213 TP316 S31600 316 S.S. ,Wld tube SA-249 TP316 S31600 316L S.S. ,Smls tube SA-213 TP316L S31603 316L S.S., Wld tube SA-249 TP316L S31603 321 S.S., Smls tube SA-213 TP321 S32100 321 S.S. ,Wld tube SA-249 TP321 S32100 347 S.S. ,Smls tube SA-213 TP347 S34700 347 S.S. ,Wld tube SA-249 TP347 S34700 410 S.S. (Ferritic), Smls or Wld tube SA-268 TP410 S41000 Copper tube SB-111 C12200 Admiralty Brass, Smls tube SB-111 C44300 , C44400, C44500 70-30 CuNi, Smls tube SB-111 C71500 90-10 CuNi, Smls tube SB-111 C70600 Monel 400, Smls Tube SB-163 N04400 Inconel 600, Smls tube SB-163 N06600 Inconel 625, Smls tube SB-444 N06625
Hastelloy C-22 SB-622 (seamless) SB-626 (welded) N06022
Hastelly C-276 SB-622 (seamless) SB-626 (welded) N10276
Duplex 2205 SA-789 SA-790
S31808 S32205
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3,Part one
Mechanical Equipment
Page 31 of 279
UNS ASTM EN no. W.-nr AFNOR Duplex stainless steels
S31500 - 1.4424 1.4417 Z2CND18-05-03 S31803/S32205 - 1.4462 - Z2CND22-05-03
S32304 - 1.4362 1.4362 Z2NC23-04AZ S32707 - - - - S32750 - 1.441 - -
High-alloy austenitic stainless steels and nickel alloys N06600 Alloy 600 - 2.4816 - N06690 Alloy 690 2.4642*** 2.4642 NC30FE(RCCM) N08825 Alloy 825 - 2.4858 - N08028 - 1.4563 1.4563 - N08904 - 1.4539 1.4539 Z1NCDU25-20-4 S31254 - 1.4547 (1.4529)** -
Austenitic stainless steels S30403/S30400 304L/304 1.4306/1.4301 1.4306/1.4301 Z2CN18-10 S31603/S31600 316L/316 1.4435/1.4436 1.4435/1.4436 Z2CND17-13
S31635 316Ti 1.4571 1.4571 (Z6CNDT17-12)** S32100/S32109 321/321H 1.4541/1.4940 1.4541/1.4878 (Z6CNT18-10)**
Titanium Pure titanium and titanium grades: 1, 2, 3, 4, 7, 9, 11, 12, 16, 17, 26 and 28
Zirconium Zirconium 702 (ZR-702) A-789 SA-789 - - - A-789 SA-789 10216-5 VD TÜV Blatt 508 - A-789 SA-789 10216-5 VD TÜV Blatt 418 NFA 49-217 A-789 SA-789 10216-5 - - A-789 SA-789 - - NFA 49-217
B-163 B-167 SB-163 SB-167 - VD TÜV Blatt 305 - B-163 B-167 SB-163 SB-167 - - - B-163 B-423 SB-163 SB-423 10216-5 - -
B-668 SB-668 10216-5 VD TÜV Blatt 483 - A-269 SB-677 10216-5 VD TÜV Blatt 421 NFA 49-217
A-213 A-269 - 10216-5 - - A-213 - - DIN 17458 NFA 49-217
A-213 A-269 SA-213 10216-5 DIN 17458 NFA 49-217
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3,Part one
Mechanical Equipment
Page 32 of 279
Material of construction , H.E parts A 105 A 420 GR.WPL 6 API 5L GRADE C NITRL A 105 GALVANIZED A 516 GR.65 B 444 GR.N006625 SS304 A 106 A 516 GR.X70 B 564 GR. N06625 SS316
A 182 GR. F316L A 53 B366-WPNCMC (UNSN 06625) SS321
A 193 GR.B7 A 671 GR.CC 60 CLASS22 C 20 SS347 A 194 GR.2H A 694 F 53 HASTB SS410 A 20 A 694 F 65 HASTC SS6LC A 216 GR.WCB A 694 F60 HASTELLOY SS304L A 234 GR.WPB A 860 GR. WPHY 52 HYPLN SS316L A 283 GR.C A 860 GR. WPHY 65 I800 TFELS A 312 TP 316L A 860 GR.WPHY60 IN3LC TFESS A 320 GR. L7 A333A INCNL TI A 350 GR. LF2 CLASS 1 A333C INCOLOY ALLOY X42W A 350 GR. LF2 CLASS 1 A335B MONEL X46W A 351 GR. CF8M A335C MONEL ALLOY X52W A 352 GR. LCB A335D NEPNE X56W A 358 GR.316L CL.1 A335F NI200 X60W A 36 A335G NI201 X65W A 360 GR. LF2 CLASS 1 API 5L GRADE A NICKLE ZR A 403 GR.WP316L API 5L GRADE B NICKLE ALLOY
UNS ASTM EN no. W.-nr AFNOR A-213 A-269 SA-213 10216-5 DIN 17458 NFA 49-217
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3,Part one
Mechanical Equipment
Page 33 of 279
30002001-Evaporator, Agitated Film Database name Evaporator, Agitated Film Level of estimate Detailed
Database code 30002001 Version 3.0.306
Standard Date Feb. 2014
Evaporator, Agitated Film Costing Parameters
Number of Records: 3,488,640
Header configuration Pipe & bend
Plug box Cover plate
Finning type Extruded/Embedded
L-footed
Design Standards API
TEMA R TEMA C
ASME Section VIII, Div. 1 Canadian Standards
NACE MR0175 UBC Building Codes
ATEX CE
PED
Area Min 2 m^2
Max. 14000 m^2 Step: 300
Internal Pressure Full Vacuum Min. 100 psi Max. 900 psi
step: 50
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3,Part one
Mechanical Equipment
Page 34 of 279
30002002-Evaporator, Falling Film
Database name Evaporator, Falling Film Level of estimate Detailed
Database code 30002002 Version 3.0.306
Standard Date Feb. 2014
Evaporator, Falling Film Costing Parameters
Number of Records: 3,488,640
Header configuration Pipe & bend
Plug box Cover plate
Finning type Extruded/Embedded
L-footed
Design Standards API
TEMA R TEMA C
ASME Section VIII, Div. 1 Canadian Standards
NACE MR0175 UBC Building Codes
ATEX CE
PED
Area Min 0.5 m^2
Max. 14000 m^2 Step: 300
Internal Pressure Full Vacuum Min. 100 psi Max. 900 psi
step: 50
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3,Part one
Mechanical Equipment
Page 35 of 279
30002003-Evaporator, Forced Circulation
Database name Evaporator, Forced Circulation Level of estimate Detailed
Database code 30002003 Version 3.0.306
Standard Date Feb. 2014
Evaporator, Forced Circulation Costing Parameters
Number of Records: 3,488,640
Header configuration Pipe & bend
Plug box Cover plate
Finning type Extruded/Embedded
L-footed
Design Standards API
TEMA R TEMA C
ASME Section VIII, Div. 1 Canadian Standards
NACE MR0175 UBC Building Codes
ATEX CE
PED
Area Min 14 m^2
Max. 14000 m^2 Step: 300
Internal Pressure Full Vacuum Min. 100 psi Max. 900 psi
step: 50
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3,Part one
Mechanical Equipment
Page 36 of 279
30002004-Evaporator, Horizontal Tube
Database name Evaporator, Horizontal Tube Level of estimate Detailed
Database code 30002004 Version 3.0.306
Standard Date Feb. 2014
Evaporator, Horizontal Tube Costing Parameters
Number of Records: 3,488,640
Header configuration Pipe & bend
Plug box Cover plate
Design Standards API
TEMA R TEMA C
ASME Section VIII, Div. 1 Canadian Standards
NACE MR0175 UBC Building Codes
ATEX CE
PED
Area Min 10 m^2
Max. 14000 m^2 Step: 300
Internal Pressure Full Vacuum Min. 100 psi Max. 900 psi
step: 50
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3,Part one
Mechanical Equipment
Page 37 of 279
30002005-Evaporator, Vertical Tube
Database name Evaporator, Vertical Tube Level of estimate Detailed
Database code 30002005 Version 3.0.306
Standard Date Feb. 2014
Evaporator, Vertical Tube Costing Parameters
Number of Records: 3,488,640
Header configuration Pipe & bend
Plug box Cover plate
Design Standards API
TEMA R TEMA C
ASME Section VIII, Div. 1 Canadian Standards
NACE MR0175 UBC Building Codes
ATEX CE
PED
Area Min 10 m^2
Max. 14000 m^2 Step: 300
Internal Pressure Full Vacuum Min. 100 psi Max. 900 psi
step: 50
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3,Part one
Mechanical Equipment
Page 38 of 279
30003-Condenser Material Specifications which is used in NoDoC for Condenser Nominal
Composition ASME Code
UNS Number
C Stl , Wld Tube SA-334-6 SA-214
K03006 K01807
C Stl , Smls Tube SA-179 SA-192
K01200 K01201
1 1/4 Cr - 1/2 Mo-Si, Smls tube SA-213-T11 (SA-199-T11) K11597
2 1/4 Cr - 1 Mo, Smls Tube SA-213-T22 (SA-199-T22) K21590
5 Cr - 1/2 Mo, Smls Tube SA-213-T5 (SA-199-T5) K41545
304 S.S. , Smls tube SA-213 TP304 S30400 304 S.S. ,Wld tube SA-249 TP304 S30400 304L S.S. ,Smls tube SA-213 TP304L S30403 304L S.S. ,Wld tube SA-249 TP304L S30403 316 S.S. ,Smls tube SA-213 TP316 S31600 316 S.S. ,Wld tube SA-249 TP316 S31600 316L S.S. ,Smls tube SA-213 TP316L S31603 316L S.S., Wld tube SA-249 TP316L S31603 321 S.S., Smls tube SA-213 TP321 S32100 321 S.S. ,Wld tube SA-249 TP321 S32100 347 S.S. ,Smls tube SA-213 TP347 S34700 347 S.S. ,Wld tube SA-249 TP347 S34700 410 S.S. (Ferritic), Smls or Wld tube SA-268 TP410 S41000 Copper tube SB-111 C12200 Admiralty Brass, Smls tube SB-111 C44300 , C44400, C44500 70-30 CuNi, Smls tube SB-111 C71500 90-10 CuNi, Smls tube SB-111 C70600 Monel 400, Smls Tube SB-163 N04400 Inconel 600, Smls tube SB-163 N06600 Inconel 625, Smls tube SB-444 N06625
Hastelloy C-22 SB-622 (seamless) SB-626 (welded) N06022
Hastelly C-276 SB-622 (seamless) SB-626 (welded) N10276
Duplex 2205 SA-789 SA-790
S31808 S32205
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3,Part one
Mechanical Equipment
Page 39 of 279
UNS ASTM EN no. W.-nr AFNOR Duplex stainless steels
S31500 - 1.4424 1.4417 Z2CND18-05-03 S31803/S32205 - 1.4462 - Z2CND22-05-03
S32304 - 1.4362 1.4362 Z2NC23-04AZ S32707 - - - - S32750 - 1.441 - -
High-alloy austenitic stainless steels and nickel alloys N06600 Alloy 600 - 2.4816 - N06690 Alloy 690 2.4642*** 2.4642 NC30FE(RCCM) N08825 Alloy 825 - 2.4858 - N08028 - 1.4563 1.4563 - N08904 - 1.4539 1.4539 Z1NCDU25-20-4 S31254 - 1.4547 (1.4529)** -
Austenitic stainless steels S30403/S30400 304L/304 1.4306/1.4301 1.4306/1.4301 Z2CN18-10 S31603/S31600 316L/316 1.4435/1.4436 1.4435/1.4436 Z2CND17-13
S31635 316Ti 1.4571 1.4571 (Z6CNDT17-12)** S32100/S32109 321/321H 1.4541/1.4940 1.4541/1.4878 (Z6CNT18-10)**
Titanium Pure titanium and titanium grades: 1, 2, 3, 4, 7, 9, 11, 12, 16, 17, 26 and 28
Zirconium Zirconium 702 (ZR-702) A-789 SA-789 - - - A-789 SA-789 10216-5 VD TÜV Blatt 508 - A-789 SA-789 10216-5 VD TÜV Blatt 418 NFA 49-217 A-789 SA-789 10216-5 - - A-789 SA-789 - - NFA 49-217
B-163 B-167 SB-163 SB-167 - VD TÜV Blatt 305 - B-163 B-167 SB-163 SB-167 - - - B-163 B-423 SB-163 SB-423 10216-5 - -
B-668 SB-668 10216-5 VD TÜV Blatt 483 - A-269 SB-677 10216-5 VD TÜV Blatt 421 NFA 49-217
A-213 A-269 - 10216-5 - - A-213 - - DIN 17458 NFA 49-217
A-213 A-269 SA-213 10216-5 DIN 17458 NFA 49-217
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3,Part one
Mechanical Equipment
Page 40 of 279
Material of construction , H.E parts A 105 A 420 GR.WPL 6 API 5L GRADE C NITRL
A 105 GALVANIZED A 516 GR.65 B 444 GR.N006625 SS304 A 106 A 516 GR.X70 B 564 GR. N06625 SS316
A 182 GR. F316L A 53 B366-WPNCMC (UNSN 06625) SS321
A 193 GR.B7 A 671 GR.CC 60 CLASS22 C 20 SS347 A 194 GR.2H A 694 F 53 HASTB SS410
A 20 A 694 F 65 HASTC SS6LC A 216 GR.WCB A 694 F60 HASTELLOY SS304L A 234 GR.WPB A 860 GR. WPHY 52 HYPLN SS316L
A 283 GR.C A 860 GR. WPHY 65 I800 TFELS A 312 TP 316L A 860 GR.WPHY60 IN3LC TFESS A 320 GR. L7 A333A INCNL TI
A 350 GR. LF2 CLASS 1 A333C INCOLOY ALLOY X42W A 350 GR. LF2 CLASS 1 A335B MONEL X46W
A 351 GR. CF8M A335C MONEL ALLOY X52W A 352 GR. LCB A335D NEPNE X56W
A 358 GR.316L CL.1 A335F NI200 X60W A 36 A335G NI201 X65W
A 360 GR. LF2 CLASS 1 API 5L GRADE A NICKLE ZR A 403 GR.WP316L API 5L GRADE B NICKLE ALLOY
UNS ASTM EN no. W.-nr AFNOR A-213 A-269 SA-213 10216-5 DIN 17458 NFA 49-217
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3,Part one
Mechanical Equipment
Page 41 of 279
30003001-Condenser, Vertical Tube
Condenser, Vertical Tube Costing Parameters
Database name Condenser, Vertical Tube Level of estimate Detailed
Database code 30003001 Version 3.0.306
Standard API 660 Date Feb. 2014
Header configuration Pipe & bend
Plug box Cover plate
Design Standards API 660 TEMA R TEMA C
ASME Section VIII, Div. 1 Canadian Standards
NACE MR0175 UBC Building Codes
ATEX CE
PED
Finning type Extruded/Embedded
L-footed
Internal Pressure Full Vacuum Min. 100 psi Max. 900 psi
step: 50 Area
Min 1 m^2
Max. 14000 m^2
Step: 300
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3,Part one
Mechanical Equipment
Page 42 of 279
30003002-Multi jet spray-type Condenser
Database name Multi jet spray-type Condenser Level of estimate Detailed
Database code 30003002 Version 3.0.306
Standard API 660 Date Feb. 2014
Multijet spray-type Condenser Costing Parameters
Header configuration Pipe & bend
Plug box Cover plate
Design Standards API 660 TEMA R TEMA C
ASME Section VIII, Div. 1 Canadian Standards
NACE MR0175 UBC Building Codes
ATEX CE
PED
Internal Pressure Full Vacuum Min. 100 psi Max. 900 psi
step: 50
Area
Min 1 m^2
Max. 14000 m^2
Step: 300
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3,Part one
Mechanical Equipment
Page 43 of 279
30003003-Multi jet Barometric Condenser
Database name Multi jet Barometric Condenser Level of estimate Detailed
Database code 30003003 Version 3.0.306
Standard API 660 Date Feb. 2014
Multijet Barometric Condenser Costing Parameters
Number of Records: 1,744,320
Header configuration Pipe & bend
Plug box Cover plate
Design Standards API 660 TEMA R TEMA C
ASME Section VIII, Div. 1 Canadian Standards
NACE MR0175 UBC Building Codes
ATEX CE
PED
Internal Pressure Full Vacuum Min. 100 psi Max. 900 psi
step: 50
Area
Min 1 m^2
Max. 14000 m^2
Step: 300
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3,Part one
Mechanical Equipment
Page 44 of 279
30004-Vaporizer Material Specifications which is used in NoDoC for Vaporizer
Nominal Composition
ASME Code
UNS Number
C Stl , Wld Tube SA-334-6 SA-214
K03006 K01807
C Stl , Smls Tube SA-179 SA-192
K01200 K01201
1 1/4 Cr - 1/2 Mo-Si, Smls tube SA-213-T11 (SA-199-T11) K11597
2 1/4 Cr - 1 Mo, Smls Tube SA-213-T22 (SA-199-T22) K21590
5 Cr - 1/2 Mo, Smls Tube SA-213-T5 (SA-199-T5) K41545
304 S.S. , Smls tube SA-213 TP304 S30400 304 S.S. ,Wld tube SA-249 TP304 S30400 304L S.S. ,Smls tube SA-213 TP304L S30403 304L S.S. ,Wld tube SA-249 TP304L S30403 316 S.S. ,Smls tube SA-213 TP316 S31600 316 S.S. ,Wld tube SA-249 TP316 S31600 316L S.S. ,Smls tube SA-213 TP316L S31603 316L S.S., Wld tube SA-249 TP316L S31603 321 S.S., Smls tube SA-213 TP321 S32100 321 S.S. ,Wld tube SA-249 TP321 S32100 347 S.S. ,Smls tube SA-213 TP347 S34700 347 S.S. ,Wld tube SA-249 TP347 S34700 410 S.S. (Ferritic), Smls or Wld tube SA-268 TP410 S41000 Copper tube SB-111 C12200 Admiralty Brass, Smls tube SB-111 C44300 , C44400, C44500 70-30 CuNi, Smls tube SB-111 C71500 90-10 CuNi, Smls tube SB-111 C70600 Monel 400, Smls Tube SB-163 N04400 Inconel 600, Smls tube SB-163 N06600 Inconel 625, Smls tube SB-444 N06625
Hastelloy C-22 SB-622 (seamless) SB-626 (welded) N06022
Hastelly C-276 SB-622 (seamless) SB-626 (welded) N10276
Duplex 2205 SA-789 SA-790
S31808 S32205
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3,Part one
Mechanical Equipment
Page 45 of 279
UNS ASTM EN no. W.-nr AFNOR Duplex stainless steels
S31500 - 1.4424 1.4417 Z2CND18-05-03 S31803/S32205 - 1.4462 - Z2CND22-05-03
S32304 - 1.4362 1.4362 Z2NC23-04AZ S32707 - - - - S32750 - 1.441 - -
High-alloy austenitic stainless steels and nickel alloys N06600 Alloy 600 - 2.4816 - N06690 Alloy 690 2.4642*** 2.4642 NC30FE(RCCM) N08825 Alloy 825 - 2.4858 - N08028 - 1.4563 1.4563 - N08904 - 1.4539 1.4539 Z1NCDU25-20-4 S31254 - 1.4547 (1.4529)** -
Austenitic stainless steels S30403/S30400 304L/304 1.4306/1.4301 1.4306/1.4301 Z2CN18-10 S31603/S31600 316L/316 1.4435/1.4436 1.4435/1.4436 Z2CND17-13
S31635 316Ti 1.4571 1.4571 (Z6CNDT17-12)** S32100/S32109 321/321H 1.4541/1.4940 1.4541/1.4878 (Z6CNT18-10)**
Titanium Pure titanium and titanium grades: 1, 2, 3, 4, 7, 9, 11, 12, 16, 17, 26 and 28
Zirconium Zirconium 702 (ZR-702) A-789 SA-789 - - - A-789 SA-789 10216-5 VD TÜV Blatt 508 - A-789 SA-789 10216-5 VD TÜV Blatt 418 NFA 49-217 A-789 SA-789 10216-5 - - A-789 SA-789 - - NFA 49-217
B-163 B-167 SB-163 SB-167 - VD TÜV Blatt 305 - B-163 B-167 SB-163 SB-167 - - - B-163 B-423 SB-163 SB-423 10216-5 - -
B-668 SB-668 10216-5 VD TÜV Blatt 483 - A-269 SB-677 10216-5 VD TÜV Blatt 421 NFA 49-217
A-213 A-269 - 10216-5 - - A-213 - - DIN 17458 NFA 49-217
A-213 A-269 SA-213 10216-5 DIN 17458 NFA 49-217
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3,Part one
Mechanical Equipment
Page 46 of 279
Material of construction , H.E parts A 105 A 420 GR.WPL 6 API 5L GRADE C NITRL
A 105 GALVANIZED A 516 GR.65 B 444 GR.N006625 SS304 A 106 A 516 GR.X70 B 564 GR. N06625 SS316
A 182 GR. F316L A 53 B366-WPNCMC (UNSN 06625) SS321
A 193 GR.B7 A 671 GR.CC 60 CLASS22 C 20 SS347 A 194 GR.2H A 694 F 53 HASTB SS410
A 20 A 694 F 65 HASTC SS6LC A 216 GR.WCB A 694 F60 HASTELLOY SS304L A 234 GR.WPB A 860 GR. WPHY 52 HYPLN SS316L
A 283 GR.C A 860 GR. WPHY 65 I800 TFELS A 312 TP 316L A 860 GR.WPHY60 IN3LC TFESS A 320 GR. L7 A333A INCNL TI
A 350 GR. LF2 CLASS 1 A333C INCOLOY ALLOY X42W A 350 GR. LF2 CLASS 1 A335B MONEL X46W
A 351 GR. CF8M A335C MONEL ALLOY X52W A 352 GR. LCB A335D NEPNE X56W
A 358 GR.316L CL.1 A335F NI200 X60W A 36 A335G NI201 X65W
A 360 GR. LF2 CLASS 1 API 5L GRADE A NICKLE ZR A 403 GR.WP316L API 5L GRADE B NICKLE ALLOY
UNS ASTM EN no. W.-nr AFNOR A-213 A-269 SA-213 10216-5 DIN 17458 NFA 49-217
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3,Part one
Mechanical Equipment
Page 47 of 279
30004001-Vaporizer, Jacketed Vessel
Database name Vaporizer, Jacketed Vessel Level of estimate Detailed
Database code 30004001 Version 3.0.306
Standard Date Feb. 2014
Vaporizer, Jacketed Vessel Costing Parameters
Number of Records: 3,488,640
Header configuration Pipe & bend
Plug box Cover plate
Finning type Extruded/Embedded
L-footed
Design Standards API
TEMA R TEMA C
ASME Section VIII, Div. 1 Canadian Standards
NACE MR0175 UBC Building Codes
ATEX CE
PED
Area Min 2 m^2
Max. 14000 m^2 Step: 300
Internal Pressure Full Vacuum Min. 100 psi Max. 900 psi
step: 50
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3,Part one
Mechanical Equipment
Page 48 of 279
30004002-Vaporizer, Jacketed Vessel with internal coil
Database name Vaporizer, Jacketed Vessel with internal coil Level of estimate Detailed
Database code 30004002 Version 3.0.306
Standard Date Feb. 2014
Vaporizer, Jacketed Vessel with internal coil Costing Parameters
Number of Records: 3,488,640
Header configuration Pipe & bend
Plug box Cover plate
Finning type Extruded/Embedded
L-footed
Design Standards API
TEMA R TEMA C
ASME Section VIII, Div. 1 Canadian Standards
NACE MR0175 UBC Building Codes
ATEX CE
PED
Area Min 2 m^2
Max. 14000 m^2 Step: 300
Internal Pressure Full Vacuum Min. 100 psi Max. 900 psi
step: 50
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3,Part one
Mechanical Equipment
Page 49 of 279
30005-Separator Materials used in NoDoC for costing of Separators which have been extracted from ASME Section VIII Div, are shown in the following table.
Type of material Subsection C Material tables Carbon and Low Alloy Steels
Part UCS UCS 23
Nonferrous Materials Part UNF
UNF 23.1 – Aluminum and Aluminum Alloys UNF 23.2 – Copper and Copper Alloys UNF 23.3 – Nickel, Cobalt and High Nickel Alloys UNF 23.4 – Titanium and Titanium Alloys UNF 23.5 – Zirconium
High Alloy Steels Part UHA UHA 23 Cast Iron Part UCI UCI 23 Cast Ductile Iron Part UCD UCD 23
UNS Series Metal type(s)
A00001 to A99999 Aluminum and aluminum alloys
C00001 to C99999 Copper and copper alloys
F00001 to F99999 Cast irons G00001 to G99999 AISI and SAE carbon and alloy steels (except tool steels) J00001 to J99999 Cast steels (except tool steels) N00001 to N99999 Nickel and nickel alloys R00001 to R99999 Reactive and refractory metals and alloys
S00001 to S99999 Heat and corrosion resistant (stainless) steels
Following tables shows the list of materials that are the detailed list of materials.
CARBON AND LOW ALLOY STEEL
Spec. No. Type/Grade Spec. No. Type/Grade Spec. No. Type/Grade
SA-36 . . . SA-302 A, B, C, D SA-508 1, 1A, 2 Cl. 1, 3 Cl. 1, 3V, 4N Cl. 3, 22 Cl. 3 SA-53 E/A, E/B, S/A, S/B SA-307 B SA-515 60, 65, 70 SA-105 . . . SA-320 L7, L7A, L7M, L43 SA-516 55, 60, 65, 70 SA-106 A, B, C SA-325 1 SA-524 I, II SA-135 A, B SA-333 1, 3, 4, 6, 7, 9 SA-533 A Cl. 1 & 2, B Cl. 1 & 2, SA-178 A, C SA-334 1, 3, 6, 7, 9 C Cl. 1 & 2, D Cl. 2 SA-179 . . . SA-335 P1, P2, P5, P5b, P5c, SA-537 Cl.1, 2, & 3 P9, P11, P12, P15, SA-540 B21, B22, B23, B24, SA-181 . . . P21, P22, P91 B24V
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3,Part one
Mechanical Equipment
Page 50 of 279
CARBON AND LOW ALLOY STEEL
Spec. No. Type/Grade Spec. No. Type/Grade Spec. No. Type/Grade
SA-182 FR, F1, F2, F3V, F5, SA-336 F1, F3V, F5, F5A, F9, F5a, F9, F11 Cl. 1 & F11 Cl. 2 & 3, F12, SA-541 1, 1A, 2 Cl. 1, 3 Cl. 1,
3V, 2, F12 Cl. 1 & 2, F21 Cl. 1 & 3, F22 Cl. 22 Cl. 3, 22V F21, F22 Cl. 1 & 3, 1 & 3, F22V, F91, SA-542 B Cl. 4, C Cl. 4a, D Cl.
4a F22V, F91 F304, F304H, F304L, F304N, F310, F316, SA-556 A2, B2, C2 SA-192 . . . F316H, F316L, SA-557 A2, B2, C2 SA-193 B5, B7, B7M, B16 F316N, F321, F321H, SA-199 T5, T9, T11, T21, T22 F347, F347H, F348, SA-562 . . . F348H, FXM-11, SA-202 A, B FXM-27Cb SA-574 . . . SA-203 A, B, D, E, F SA-204 A, B, C SA-350 LF1, LF2, LF3, LF5,
LF9 SA-587 . . .
SA-209 T1, T1a, T1b SA-210 A-1, C SA-352 LCB, LC1, LC2, LC3 SA-612 . . . SA-354 BC, BD SA-213 T2, T5, T5b, T5c, T9, SA-620 . . . T11, T12, T17, T21, SA-369 FP1, FP2, FP5, FP9, T22, T91 FP11, FP12, FP21, SA-662 A, B, C SA-214 . . . FP22 SA-216 WCA, WCB, WCC SA-675 45, 50, 55, 60, 65, 70 SA-217 C12, C5, WC1, WC4, SA-372 A, B, C, D, E Cl. 65 &
70,
WC5, WC6, WC9 F Cl. 70, G Cl. 70, SA-695 B/35, B/40 H Cl. 70, J Cl. 65, 70,
&
SA-225 C 110, L, M Cl. A & B SA-727 . . . SA-226 . . . SA-387 2, 5, 11, 12, 21, 22,
91 SA-737 B, C
SA-234 WPB, WPC, WPR, WP1, SA-738 A, B, C WP5, WP9, WP11 Cl. 1, SA-414 A, B, C, D, E, F, G SA-739 B11, B22 WP12 Cl. 1, WP22 Cl. 1 SA-420 WPL 3, WPL 6, WPL
9 SA-765 I, II, III
SA-250 T1, T1a, T1b SA-423 1, 2 SA-812 65, 80 SA-266 1, 2, 3, 4 SA-437 B4B, B4C SA-832 21V, 22V SA-283 SA-285
A, B, C, D A, B, C SA-449 . . . SA-836 . . .
SA-455 . . . SA-299 . . . SA/CSA-
G40.21 38W
SA-487 1 Cl. A & B, 2 Cl. A & B,
4 Cl. A, 8 Cl. A
NONFERROUS METALS — ALUMINUM AND ALUMINUM ALLOY PRODUCTS Spec. No.
Alloy Design./UNS No. Spec. No.
Alloy Desig./UNS No.
SB-26 A02040, A03560, A24430 SB-221 A91060, A91100, A92024, A93003, A95083,
A95086, A95154, A95454, A95456, A96061,
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3,Part one
Mechanical Equipment
Page 51 of 279
SB-108 A02040, A03560 A96063
SB-209 Alclad 3003, 3004, 6061; A91060, A91100, SB-234 Alclad 3003; A91060, A93003, A95052, A95454,
A93003, A93004, A95052, A95083, A95086, A96061 A95154, A95254, A95454, A95456, A95652, A96061 SB-241 Alclad 3003; A91060, A91100, A93003,
A95052, A95083, A95086, A95454,A95456, A96061, SB-210 Alclad 3003; A91060, A93003, A95052, A96063 A95154, A96061, A96063 SB-247 A92014, A93003, A95083, A96061 SB-211 A92014, A92024, A96061
SB-308 A96061
NONFERROUS METALS — COPPER AND COPPER ALLOYS
Spec. No. UNS No. Spec. No. UNS No.
SB-42 C10200, C12000, C12200 SB-171 C36500, C44300, C44400, C44500, C46400,
SB-43 C23000 C46500, C61400, C63000, C70600, C71500
SB-61 C92200 SB-187 C10200, C11000
SB-62 C83600 SB-271 C95200
SB-75 C10200, C12000, C12200, C14200 SB-283 C37700, C64200
SB-96 C65500 SB-315 C65500
SB-98 C65100, C65500, C66100 SB-359 C70600
SB-111 C10200,C12000, C12200, C14200, C19200, C23000, C28000, C44300, C44400, C44500, C60800, C68700, C70400, C70600, C71000,
SB-395 C10200, C12000, C12200, C14200, C19200, C23000, C44300, C44400, C44500, C60800, C68700, C70600, C71000, C71500
C71500, C72200 SB-466 C70600, C71000, C71500 SB-135 C23000 SB-467 C70600
SB-148 C95200, C95400 SB-543 C12200, C19400, C23000, C44300, C44400,
SB-150 C61400, C62300, C63000, C64200 C44500, C68700, C70400, C70600, C71500
SB-152 C10200, C10400, C10500, C10700, C11000, SB-584 C92200, C93700, C97600
C12200, C12300
SB-169 C61400
NONFERROUS METALS — NICKEL AND HIGH NICKEL ALLOYS Spec. No. UNS No.
Spec. No. UNS No.
SB-626 N06002, N06007, N06022, N06030,
N06059, SB-677 N08904, N08925
N06455, N06975, N06985, N08320,
N10001,
N10276, N10665, R30556 SB-688 N08366, N08367
SB-637 N07718, N07750 SB-690 N08366, N08367
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3,Part one
Mechanical Equipment
Page 52 of 279
SB-649 N08904, N08925 SB-691 N08366, N08367
SB-668 N08028 SB-704 N06625, N08825
SB-672 N08700 SB-705 N06625, N08825
SB-673 N08904, N08925 SB-709 N08028
SB-674 N08904, N08925 SB-710 N08330
SB-675 N08366, N08367 SB-729 N08020
SB-676 N08366, N08367 SB-804 N08367
NONFERROUS METALS — TITANIUM AND TITANIUM ALLOYS Spec. No. UNS No.
Spec. No. UNS No.
SB-265 R50250, R50400, R50550, R52250, R52252, R52400, SB-363 R50250, R50400, R50550, R52400, R53400
R52402, R53400, R56320 SB-367 R50400, R50550 SB-337 R50250, R50400, R50550, R52400, R53400, R56320 SB-381 R50250, R50400, R50550, R52400,
R52402, SB-338 R50250, R50400, R50550, R52400, R52402, R53400, R53400 R56320
SB-348 R50250, R50400, R50550, R52400, R52402, R53400
NONFERROUS METALS — ZIRCONIUM
Spec. No. UNS No. Spec. No. UNS No.
SB-493 SB-523 SB-550
R60702, R60702, R60702,
R60705 R60705 R60705
SB-551 SB-658 R60702, R60705 R60702, R60705
HIGH ALLOY STEEL Spec. No. UNS
No. Type/Grade Spec. No. UNS
No. Type/Grade Spec. No.
UNS No. Type/Grade
SA-182 S20910 FXM-19 S34800 TP348 S44700 . . .
S21904 FXM-11 S34809 TP348H S44800 . . . S30400 F304 S38100 XM-15 S30403 F304L SA-249 S20910 TPXM-19 S30409 F304H SA-217 J91150 CA15 S24000 TPXM-29 S30815 F45 S30400 TP304
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3,Part one
Mechanical Equipment
Page 53 of 279
HIGH ALLOY STEEL Spec. No. UNS
No. Type/Grade Spec. No. UNS
No. Type/Grade Spec. No.
UNS No. Type/Grade
S31000 S31254 S31600 S31603 S31609 S31700 S31703 S31803 S32100 S32109 S34700 S34709 S34800 S34809 S41000 S44627
F310 F44 F316 F316L F316H F317 F317L F51 F321 F321H F347 F347H F348 F348H F6a Cl. 1 & 2 FXM-27Cb
SA-240 S20100 S20400 S20910 S24000 S30200 S30400 S30403 S30409 S30451 S30815 S30908 S30909 S30940 S31008 S31009 S31040
201-1, 201-2 204 XM-19 XM-29 302 304 304L 304H 304N . . . 309S 309H 309Cb 310S 310H 310Cb
S30403 S30409 S30451 S30815 S30908 S30909 S30940 S31008 S31009 S31040 S31050 S31254 S31600 S31603 S31609 S31651
TP304L TP304H TP304N . . . TP309S TP309H TP309Cb TP310S TP310H TP310Cb TP310MoLN . . . TP316 TP316L TP316H TP316N
S31050 310MoLN S31700 TP317 SA-193 S21800 B8S, B8SA S31200 . . . S31703 TP317L S30400 B8 Cl. 1 & 2 S31254 . . . S31725 . . . S30451 B8NA Cl. 1A S31260 . . . S32100 TP321 S30500 B8P Cl. 1 &
2 S31600 316 S32109 TP321H
S31600 B8M Cl.1& 2,
S31603 316L S34700 TP347
B8M2 Cl. 2 S31609 316H S34709 TP347H S31651 B8MNA Cl.
1A S31635 316Ti S34800 TP348
S32100 B8T Cl. 1 & 2
S31640 316Cb S34809 TP348H
S34700 B8C Cl. 1 & 2
S31651 316N S38100 TPXM-15
S41000 B6 S31700 317 S31703 317L SA-268 S40500 TP405 SA-213 S20910 XM-19 S31725 . . . S40800 . . . S30400 TP304 S31803 . . . S40900 TP409 S30403 TP304L S32100 321 S41000 TP410 S30409 TP304H S32304 . . . S42900 TP429 S30451 TP304N S32550 . . . S43000 TP430 S30815 . . . S32900 329 S43035 TP439 S30908 TP309S S32950 . . . S44400 . . . S30909 TP309H S34700 347 S44600 TP446-1, S30940 TP309Cb S34709 347H TP446-2 S31008 TP310S S34800 348 S44626 XM-33 S31009 TP310H S38100 XM-15 S44627 XM-27 S31040 TP310Cb S40500 405 S44635 . . . S31050 TP310MoLN S40900 409 S44660 26-3-3 S31600 TP316 S41000 410 S44700 29-4 S31603 TP316L S41008 410S S44735 . . . S31609 TP316H S42900 429 S44800 29-4-2 S31651 TP316N S43000 430 S31725 . . . S44000 . . . SA-312 S20910 TPXM-19 S32100 TP321 S44626 XM-33 S21904 TPXM-11
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3,Part one
Mechanical Equipment
Page 54 of 279
HIGH ALLOY STEEL Spec. No. UNS
No. Type/Grade Spec. No. UNS
No. Type/Grade Spec. No.
UNS No. Type/Grade
S32109 TP321H S44627 XM-27 S24000 TPXM-29 S34700 TP347 S44635 . . . S30400 TP304 S34709 TP347H S44660 26-3-3 S30403 TP304L
S30409 TP304H J92600 CF8, CF8A S31600 FP316
S30451 TP304N J92710 CF8C S31609 FP316H S30815 . . . J92800 CF3M S31651 FP316N S30908 TP309S J92900 CF8M S32100 FP321 S30909 TP309H J93000 CG8M S32109 FP321H S30940 TP309Cb J93254 CK3MCuN S34700 FP347 S31008 TP310S J93345 CE8MN S34709 FP347H S31009 TP310H J93400 CH8 S31040 TP310Cb J93402 CH20 SA-452 S30409 TP304H S31050 TP310MoLN J93790 CG6MMN S31609 TP316H S31254 . . . J94202 CK20 S34709 TP347H S31600 TP316 . . . CT15C S31603
S31609 S31651
TP316L TP316H TP316N SA-358
J94651 S31254
CN-3MN . . .
SA-453 S63198 S66286
651 Cl. A & B 660 Cl. A & B
S31700 S31703 S31725 S32100 S32109 S34700 S34709 S34800 S34809 S38100
TP317 TP317L . . . TP321 TP321H TP347 TP347H TP348 TP348H TPXM-15
SA-376 S31725 S30400 S30409 S30451 S31600 S31609 S31651 S31725 S32100
. . . TP304 TP304H TP304N TP316 TP316H TP316N . . . TP321
SA-479 S20910 S24000 S30200 S30400 S30403 S30409 S30815 S30908 S30909 S30940
XM-19 XM-29 302 304 304L 304H . . . 309S 309H 309Cb
SA-320 S30323 S30400 S31600 S32100 S34700
B8F Cl. 1, B8FA Cl. 1A B8 Cl. 1 & 2, B8A Cl. 1A B8M Cl.1& 2, B8MA Cl. 1A B8T Cl. 1 & 2 B8C Cl. 1 & 2, B8CA Cl. 1A
SA-403
S32109 S34700 S34709 S34800 S20910 S30400 S30403 S30409 S30451
TP321H TP347 TP347H TP348 XM-19 304 304L 304H 304N
S31008 S31009 S31040 S31600 S31603 S31725 S32100 S32550 S34700 S34800
310S 310H 310Cb 316 316L . . . 321 . . . 347 348
S30900 309 S40500 405 SA-336 S21904 FXM-11 S31000 310 S41000 410 S30400 F304 S31600 316 S43000 430 S30403 F304L S31603 316L S43035 439 S30409 F304H S31609 316H S44627 XM-27 S30451 F304N S31651 316N S44700 . . . S31000 F310 S31700 317 S44800 . . . S31600 F316 S31703 317L S31603
S31609 F316L F316H
S32100 S32109
321 321H
SA-564 S17400 630
S31651 S32100 S32109
F316N F321 F321H
S34700 S34709 S34800
347 347H 348
SA-666 S20100 S21904
201-1, 201-2 XM-11
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3,Part one
Mechanical Equipment
Page 55 of 279
HIGH ALLOY STEEL Spec. No. UNS
No. Type/Grade Spec. No. UNS
No. Type/Grade Spec. No.
UNS No. Type/Grade
S34700 S34709
F347 F347H
S34809 348H SA-688 S24000 TPXM-29
S34800 S34809
F348 F348H SA-409 S31725 . . . S30400 S30403
TP304 TP304L
S44627 FXM-27Cb SA-430 S30400 FP304 S30451 S31600
TP304N TP316
SA-351 J92500 J92590
CF3, CF3A CF10
S30409 S30451
FP304H FP304N
S31603 TP316L
SA-705 S17400 630 SA-731 S44626 TPXM-33 SA-790 S31260 . . . SA-813 S30908 TP309S
S44627 TPXM-27 S31500 . . . S30940 TP309Cb
S31803 . . . S31008 TP310S SA-747 J92180 CB7Cu-1 S32304 . . . S31040 TP310Cb S32550 . . . SA-789 S31260
S31500 S31803
. . .
. . .
. . .
S32750 S32900 S32950
. . .
. . .
. . .
SA-814 S30908 S30940 S31008
TP309S TP309Cb TP310S
S32304 . . . S31040 TP310Cb S32550 . . . SA-803 S43035 TP439 S32750 . . . S44660 26-3-3 SA-815 S31803 . . . S32900 . . . S32950 . . .
FERRITIC STEELS WITH PROPERTIES ENHANCED BY HEAT TREATMENT Spec. No.
Type/Grade Spec. No.
Type/Grade
SA-333 8
SA-522 I
SA-334 8 SA-533 B Cl. 3,
SA-353 . . . SA-543 B, C
SA-420 WPL8 SA-553 I, II
SA-487 4 Cl. B & E, CA6NM SA-592 A, E, F
SA-508 4N Cls. 1, 2 SA-645 . . .
SA-517 A, B, E, F, J, P SA-724 A, B, C
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3,Part one
Mechanical Equipment
Page 56 of 279
30005001-Air Sweep Separator
Database name Air Sweep Separator Level of estimate Detailed
Database code 30005001 Version 3.0.306
Standard ASME, ISO Date Feb. 2014
Air Sweep Separator Costing Parameters
Number of Records: 201,292
Pressure(Psi) Min 15
Max. 150 Step: 10
Diameter(Inches) Min. 20
Max. 216 step: 2
Standard ASME
ISO
Feed L/h Min 4
Max 220 Step 20
Fins L/h Min 2
Max 150 Step 20
Motor KW Min 4
Max 120 Step 10
Cage Speed rpm
Min 100 Max 2000
Step 20
Air flow m3/hr Min 2
Max 200 Step 20
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3,Part one
Mechanical Equipment
Page 57 of 279
30005002-Cyclone, Wet, Ceramic Lined
Database name Cyclone, Wet, Ceramic Lined Level of estimate Detailed
Database code 30005002 Version 3.0.306
Standard ASME, ISO Date Feb. 2014
Cyclone, Wet, Ceramic Lined Costing Parameters
Number of Records: 65,728
Pressure(Psi) Min 15
Max. 150 Step: 10
Diameter(Inches) Min. 1/4 Max. 30 step: 0.5
Standard ASME
ISO
Connection welded
Screwed Flanged
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3,Part one
Mechanical Equipment
Page 58 of 279
30005003-Cyclone, Wet, Urethane Lined
Database name Cyclone, Wet, Urethane Lined Level of estimate Detailed
Database code 30005003 Version 3.0.306
Standard ASME, ISO Date Feb. 2014
Cyclone, Wet, Urethane Lined Costing Parameters
Pressure(Psi)
Min 15 Max. 150 Step: 10
Diameter(Inches) Min. 13 Max. 50 step: 0.5
Standard ASME
ISO
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3,Part one
Mechanical Equipment
Page 59 of 279
30005004-Cyclone, Wet, Rubber Lined CI
Database name Cyclone, Wet, Rubber Lined CI Level of estimate Detailed
Database code 30005004 Version 3.0.306
Standard ASME, ISO Date Feb. 2014
Cyclone, Wet, Rubber Lined CI Costing Parameters
Number of Records: 82,160
Pressure(Psi) Min 15
Max. 150 Step: 10
Diameter(Inches) Min. 4
Max. 24 step: 0.5
Standard ASME
ISO
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3,Part one
Mechanical Equipment
Page 60 of 279
30005005-Cyclone, Wet, Rubber Lined FRP
Database name Cyclone, Wet, Rubber Lined FRP Level of estimate Detailed
Database code 30005005 Version 3.0.306
Standard ASME, ISO Date Feb. 2014
Cyclone, Wet, Rubber Lined FRP Costing Parameters
Number of Records: 78,052
Pressure(Psi) Min 15
Max. 150 Step: 10
Diameter(Inches) Min. 5
Max. 24 step: 0.5
Standard ASME
ISO
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3,Part one
Mechanical Equipment
Page 61 of 279
30005006-Cyclone, Wet, NiHard Lined
Database name Cyclone, Wet, NiHard Lined Level of estimate Detailed
Database code 30005006 Version 3.0.306
Standard ASME, ISO Date Feb. 2014
Cyclone, Wet, NiHard Lined Costing Parameters
Number of Records: 65,728
Pressure(Psi) Min 15
Max. 150 Step: 10
Diameter(Inches) Min. 14 Max. 30 step: 0.5
Standard ASME
ISO
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3,Part one
Mechanical Equipment
Page 62 of 279
30005007-Gas Liquid Separator, Vane Type
Database name Gas Liquid Separator, Vane Type Level of estimate Detailed
Database code 30005007 Version 3.0.306
Standard ASME, ISO Date Feb. 2014
Gas Liquid Separator, Vane Type Costing Parameters
Number of Records: 41,080
Pressure(Psi)
Min 15 Max. 150 Step: 10
Diameter(Inches) Min. 2
Max. 12 step: 0.5
Standard ASME
ISO
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3,Part one
Mechanical Equipment
Page 63 of 279
30005008-Screw Classifier, 1-Screw
Database name Screw Classifier, 1-Screw Level of estimate Detailed
Database code 30005008 Version 3.0.306
Standard ASME, ISO Date Feb. 2014
Screw Classifier, 1-Screw Costing Parameters
Number of Records: 246,480
Pressure(Psi) Min 15
Max. 150 Step: 10
Diameter(Inches) Min. 24 Max. 84 step: 0.5
Standard ASME
ISO
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3,Part one
Mechanical Equipment
Page 64 of 279
30005009-Screw Classifier, 2-Screw
Database name Screw Classifier, 2-Screw Level of estimate Detailed
Database code 30005009 Version 3.0.306
Standard ASME, ISO Date Feb. 2014
Screw Classifier, 2-Screw Costing Parameters
Number of Records: 123,240
Pressure(Psi) Min 15
Max. 150 Step: 10
Diameter(Inches) Min. 36 Max. 66 step: 0.5
Standard ASME
ISO
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3,Part one
Mechanical Equipment
Page 65 of 279
30005010-Tray Column, Bubble-cap Tray
Database name Tray Column, Bubble-cap Tray Level of estimate Detailed
Database code 30005010 Version 3.0.306
Standard ASME, ISO Date Feb. 2014
Tray Column, Bubble-cap Tray Costing Parameters
Number of Records: 123,240
Pressure(Psi) Min 15
Max. 150 Step: 10
Diameter(Inches) Min. 36 Max. 66 step: 0.5
Standard ASME
ISO
Height(Ft) Min. Max. Step:
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3,Part one
Mechanical Equipment
Page 66 of 279
30005011-Tray Column, Valve Tray
Database name Tray Column, Valve Tray Level of estimate Detailed
Database code 30005011 Version 3.0.306
Standard ASME, ISO Date Feb. 2014
Tray Column, Valve Tray Costing Parameters
Number of Records: 123,240
Pressure(Psi) Min 15
Max. 150 Step: 10
Diameter(Inches) Min. 36 Max. 66 step: 0.5
Standard ASME
ISO
Height(Ft) Min. Max. Step:
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3,Part one
Mechanical Equipment
Page 67 of 279
30005012-Tray Column, Sieve Tray
Database name Tray Column, Sieve Tray Level of estimate Detailed
Database code 30005012 Version 3.0.306
Standard ASME, ISO Date Feb. 2014
Tray Column, Sieve Tray Costing Parameters
Number of Records: 123,240
Pressure(Psi) Min 15
Max. 150 Step: 10
Diameter(Inches) Min. 36 Max. 66 step: 0.5
Standard ASME
ISO
Height(Ft) Min. Max. Step:
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3,Part one
Mechanical Equipment
Page 68 of 279
30005013-Tray Column, TurbogrideTray
Database name Tray Column, Turbogride Tray Level of estimate Detailed
Database code 30005013 Version 3.0.306
Standard ASME, ISO Date Feb. 2014
Tray Column, Turbogride Tray Costing Parameters
Number of Records: 123,240
Pressure(Psi) Min 15
Max. 150 Step: 10
Diameter(Inches) Min. 36 Max. 66 step: 0.5
Standard ASME
ISO
Height(Ft) Min. Max. Step:
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3,Part one
Mechanical Equipment
Page 69 of 279
30005014-Distillation Column, Bubble-plate tower
Database name Distillation Column, Bubble-plate tower Level of estimate Detailed
Database code 30005014 Version 3.0.306
Standard ASME, ISO Date Feb. 2014
Distillation Column, Bubble-plate tower Costing Parameters
Number of Records: 123,240
Pressure(Psi) Min 15
Max. 150 Step: 10
Diameter(Inches) Min. 36 Max. 66 step: 0.5
Standard ASME
ISO
Height(Ft) Min. Max. Step:
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3,Part one
Mechanical Equipment
Page 70 of 279
30005015-Distillation Column, Sieve-tray tower
Database name Distillation Column, Sieve-tray tower Level of estimate Detailed
Database code 30005015 Version 3.0.306
Standard ASME, ISO Date Feb. 2014
Distillation Column, Sieve-tray tower Costing Parameters
Number of Records: 123,240
Pressure(Psi) Min 15
Max. 150 Step: 10
Diameter(Inches) Min. 36 Max. 66 step: 0.5
Standard ASME
ISO
Height(Ft) Min. Max. Step:
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3,Part one
Mechanical Equipment
Page 71 of 279
30005016-Tray Distillation Column,Turbogrid tray tower
Database name Distillation Column, Turbo grid tray tower Level of estimate Detailed
Database code 30005016 Version 3.0.306
Standard ASME, ISO Date Feb. 2014
Distillation Column, Turbogrid tray tower Costing Parameters
Number of Records: 123,240
Pressure(Psi) Min 15
Max. 150 Step: 10
Diameter(Inches) Min. 36 Max. 66 step: 0.5
Standard ASME
ISO
Height(Ft) Min. Max. Step:
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3,Part one
Mechanical Equipment
Page 72 of 279
30005017-Packed Column
Database name Packed Column Level of estimate Detailed
Database code 30005017 Version 3.0.306
Standard ASME, ISO Date Feb. 2014
Packed Column Costing Parameters
Number of Records: 2,095,080
Pressure(Psi) Min 15
Max. 150 Step: 10
Diameter(Inches) Min. 36 Max. 66 step: 0.5
Standard
ASME ISO
Height(Ft) Min. Max. Step:
Packing Type Hy-Pak, Metal Super Intalox Saddles, Ceramic Super Intalox Saddles, Plastic Pall Rings, Plastic Pall Rings, Metal Intalox Saddles, Ceramic Rasching Rings, Ceramic Rasching Rings, Metal, 1/32 in. Rasching Rings, Metal, 1/16 in. Berl Saddles, Ceramic Tellerettes, Plastic Mas Pac, Plastic Quartz Rock Cross Partition, Ceramic Flexipac, Metal Interlox, Metal Chempak, Metal
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3,Part one
Mechanical Equipment
Page 73 of 279
30006-Pumps Table below shows the Materials for Pump Parts that are considered in NoDoC database.
Notes:
The abbreviation above the diagonal line indicates the case material; the abbreviation below the diagonal
line indicates trim material.
1. Abbreviations are as follows: BRZ = bronze, STL = steel, 12% CHR = 12% chrome, AUS =
austenitic stainless steel, CI = cast iron, 316 AUS = Type 316 austenitic stainless steel
2. Austenitic stainless steels include ISO Types 683-13-10/19 (AISI Standard Types 302, 303, 304,
316, 321, and 347).
3. For vertically suspended pumps with shafts exposed to liquid and running in bushings, the
standard shaft material is 12 % chrome, except for Classes S-9, A7, A-8, and D- 1. The standard
shaft material for cantilever pumps (Type VS5) is AISI 4140 where the service liquid allows (see
Annex G, Table G.1).
4. Unless otherwise specified, the need for hard-facing and the specific hard-facing material for each
application is determined by the vendor and described in the proposal. Alternatives to hard-facing
may include opening running clearances (5.7.4) or the use of non-galling materials, such as
Nitronic 60, Waukesha 88, or non-metallic materials, depending on the corrosiveness of the
pumped liquid.
5. For Class S-6, the standard shaft material for boiler feed service and for liquid temperatures
above 175 °C (350 °F) is 12 % chrome (see Annex G. Table G-1).
6. If pumps with axially split casings are furnished, a sheet gasket suitable for the service is
acceptable. Spiral wound gaskets should contain a filler material suitable for the service. Gaskets
other than spiral wound may be proposed and furnished if proven suitable for service and
specifically approved by the purchaser.
7. Alternate materials may be substituted for liquid temperatures greater than 45 °C (110 °F) or for
other special services.
8. Unless otherwise specified, AISI 4140 steel may be used for non-wetted case and gland studs.
9. Some applications may require alloy grades higher than the Duplex materials. “Super Duplex ”
material grades with pitting resistance equivalency values greater than 40 may be necessary.
PRE > 40 Where PRE is based on actual chemical analysis.
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3,Part one
Mechanical Equipment
Page 74 of 279
PRE = Cr free + (3,3 x % Molybdenum) + (2 x % Copper) + (2 x % Tungsten) + (16 x %
Nitrogen)
PRE = [(%Chromium-14,5) x %Carbon] + (3.3 x % Molybdenum) + (2x % Copper) +
(2x % Tungsten) + (16 x % Nitrogen)
Note that alternative materials such as “super austenitic” may also be considered.
10. Non-metallic wear part materials, proven to be compatible with the specified process fluid, may
be proposed within the applicable limits.
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
PART Full Compliance Materials 2
I-1 CI CI
I-2 CI BRZ
S-1 STL CI
S-3 STL NI-RESIST
S-4 STL STL
S-5 STL STL 12% CHR
S-6 STL 12% CHR
S-8 12 STL 316 AUS
S-9 12 STLMONEL
C-6 12% CHR 12% CHR
A-7 AUS AUS 3&4
A-8 316 AUS 316 AUS 4
D-1 10 DUPLEXDUPLEX
D-2 10 Super Duplex Super Duplex
Pressure Casing Yes Cast
Iron Cast Iron
Carbon Steel
Carbon Steel
Carbon Steel
Carbon Steel
Carbon Steel
Carbon Steel Carbon Steel 12% CHR AUS 316 AUS Duplex Super
Duplex
Inner Case parts: ( bowls, diffusers, diaphragms)
No Cast Iron
Bronze
Cast Iron
Ni-Resist
Cast Iron
Carbon Steel
12% CHR 316 AUS Monel 12% CHR AUS 316 AUS Duplex Super
Duplex
Impeller Yes Cast Iron
Bronze
Cast Iron
Ni-Resist
Carbon Steel
Carbon Steel
12% CHR 316 AUS Monel 12% CHR AUS 316 AUS Duplex Super
Duplex
Case Wear Rings 11 No Cast
Iron Bronze
Cast Iron
Ni-Resist
Cast Iron
12% CHR Hardened
12% CHR Hardened
Hard-faced 316AUS 5
Monel 12% CHR Hardened
Hard-faced AUS 5
Hard-faced 316 AUS 5
Hard-faced Duplex 5
Hard-faced Super Duplex 5
Impeller Wear Rings 11 No Cast
Iron Bronze
Cast Iron
Ni-Resist
Cast Iron
12% CHR Hardened
12% CHR Hardened
Hard-faced 316AUS 5
Monel 12% CHR Hardened
Hard-faced AUS 5
Hard-faced 316 AUS 5
Hard-faced Duplex 5
Hard-faced Super Duplex 5
Shaft 4 Yes Carbon Steel
Carbon Steel
Carbon Steel
Carbon Steel
Carbon Steel
AISI 4140
AISI 4140 6 316 AUS K-Monel 12% CHR AUS 316 AUS Duplex Super
Duplex
Throat bushings11 No Cast
Iron Bronze
Cast Iron
Ni-Resist
Cast Iron
12% CHR Hardened
12% CHR Hardened
316 AUS Monel 12% CHR Hardened
AUS 316 AUS Duplex Super Duplex
Interstage Sleeves 11 No Cast
Iron Bronze
Cast Iron
Ni-Resist
Cast Iron
12% CHR Hardened
12% CHR Hardened
Hard-faced 316AUS 5
Monel 12% CHR Hardened
Hard-faced AUS 5
Hard-faced 316 AUS 5
Hard-faced Duplex 5
Hard-faced Super Duplex 5
Interstage Bushings 11 No Cast
Iron Bronze
Cast Iron
Ni-Resist
Cast Iron
12% CHR Hardened
12% CHR Hardened
Hard-faced 316AUS 5
Monel 12% CHR Hardened
Hard-faced AUS 5
Hard-faced 316 AUS 5
Hard-faced Duplex 5
Hard-faced Super Duplex 5
Case and Gland Studs Yes Carbo
n Steel Carbon Steel
AISI 4140 Steel
AISI 4140 Steel
AISI 4140 Steel
AISI 4140 Steel
AISI 4140 Steel
AISI 4140 Steel
K Monel Hardene d 9
AISI 4140 Steel
AISI 4140 Steel
AISI 4140 Steel Duplex 9 Super
Duplex 9
Case Gasket No AUS, Spiral Wound 7
AUS, Spiral Wound 7
AUS, Spiral Wound 7
AUS, Spiral Wound 7
AUS, Spiral Wound 7
AUS, Spiral Wound 7
AUS, Spiral Wound 7
316 AUS Spiral Wound 7
Monel, Spiral Wound, PTFE filled 7
AUS, Spiral Wound 7
AUS, Spiral Wound 7
316 AUS Spiral Wound 7
Duplex SS Spiral Wound 7
Duplex SS Spiral Wound 7
Discharge Head/ Suction Can
Yes Carbon Steel
Carbon Steel
Carbon Steel
Carbon Steel
Carbon Steel
Carbon Steel
Carbon Steel
Carbon Steel Carbon Steel AUS AUS 316 AUS Duplex Super
Duplex
Column / Bowl shaft bushings No Nitrile
8 Bronze
Filled Carbon
Nitrile 8 Filled Carbon
Filled Carbon
Filled Carbon
Filled Carbon
Filled Carbon
Filled Carbon
Filled Carbon
Filled Carbon
Filled Carbon
Filled Carbon
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3,Part one
Mechanical Equipment
Page 76 of 279
Wetted Fasteners(Bolts)
Yes Carbon Steel
Carbon Steel
Carbon Steel
Carbon Steel
Carbon Steel 316 AUS 316 AUS 316 AUS K Monel 316 AUS 316
AUS 316 AUS Duplex Super Duplex
International Standard Materials for Pump Parts Acc. To API used in NoDoC for costing of Pumps
Material Class Applications U.S.A. International
ISO Europe Japan JIS
ASTM UNS EN Std Symbol Material No
Cast Iron Pressure Castings A 278 Class 30 F 12401 185/ Gr. 250 EN 1561 EN-GJL-250 JL 1040 G 5501, FC
300
General Castings A 48 Class 25/30/40
F 11 701/ F 12 101 185/ Gr. 300 EN 1561 EN-GJL-250 EN-
GJL-300 JL 1040 JL 1050
G 5501, FC 250/300
Carbon Steel
Pressure Castings A216 Gr WCB J 03 002 4991 C23-45 AH
EN 10213-2 GP 240 GH 1.0619 G 5151, C1
SCPH 2
Wrought / Forgings A 266 Class 2 K 03506 683-18-C25 EN 10222-2 P 280 GH 1.0426 G3202, C1
SFVC 2A
Bar Stock: Pressure A 696 Gr B40 G 10 200 683-18-C 25 EN 10273 P 295 GH 1.0481 G 4051, C1 S25C
Bar Stock: General A 576 Gr 1045 G 10 450 683-18-C 45e EN 10083-2 C 45 1.0503 G 4051, C1
S45C Bolts and Studs (General) A 193 Gr B7 G 41 400 2604-2-F31 EN 10269 42 Cr Mo 4 1.7225 G 4107, C1
SNB7
Nuts(General) A 194 Gr 2H K 04 002 683-1-C35e EN 10269 C 35 E 1.1181 G 4051, C1 S45C
Plate A 516 Gr 65/70 K 02 403/ K 02 700 EN 10028-
2 P 295 GH 1.0481 G 3106, Gr SM400B
Pipe A 106 GrB K 03 006 EN 10208-1 L 245 GA 1.0459 G3456, Gr.
STPT 370/410
Fittings A 105 K 03 504 See National Standards G 4051, C1
S25C
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3,Part one
Mechanical Equipment
Page 77 of 279
International Standard Materials for Pump Parts Acc. To API used in NoDoC for costing of Pumps
Material Class Applications U.S.A. International
ISO Europe Japan JIS
ASTM UNS EN Std Symbol Material No
AISI 4140 Steel
Bar Stock A 434 Class BB A 434 Class BC G 41 400c 683-2-3 EN 10083-
1 42 Cr Mo 4 1.7225 G 4105, C1 SCM 440
Bolts and Studs A 193 Gr B7 G 41 400 EN 10269 42 Cr Mo 4 1.7225 G 4107, C1 SNB16
Nuts A 194 Gr 2H K 04 002 2604-2-F31 EN 10269 C 35 E 1.1181 G 4051, C1 S45C
12% Chrome Steel
Pressure Castings A 217 Gr CA 15 J 91 150 EN 10213-
2 GX 8 Cr Ni 12 1.4107 G5121, C1 SCS 1
A 487 Gr CA6NM J 91 540 EN 10213-
2 GX 4 Cr Ni 13-4 1.4317 G5121, C1 SCS 6
General casing A 743 Gr CA 15 J 91 150 EN 10283 GX 12 Cr 12 1.4011 A 743 Gr CA6NM J 91 540 EN 10283-
2 GX 4 Cr Ni 13-4 1.4317
Wrought / Forgings: Pressure
A 182 Gr F6a Cl 1 S 41 000 683-13-3 EN 10222-
5 X 3 Cr NiMo 13-4-1 1.4313 G3214, C1 SUS
F6 B A 182 Gr F 6 NM S 41 500 G3214, C1 SUS
F6NM
Wrought / Forgings: General A 473 Type 410 S 41 000 683-13-2 EN 10088-
3 X 12 Cr 13 1.4006 G3214, C1 SUS F6 NM
Bar Stock: Pressure A 479 Type 410 S 41 000 683-13-3 EN 10272 X12 Cr 13 1.4006 G4303 or 410
Bar Stock: General A 276 Type 410 S 41 400 683-13-3 EN 10088-3 X 12 Cr 13 1.4006
G4303, Grl SUS 403 or 420
Bar Stock: Forgings A 276 Type 420 S 42 000 683-13-4 EN 10088-3 X 20 Cr 13 1.4021 G4303, Grl
SUS 403 or
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3,Part one
Mechanical Equipment
Page 78 of 279
International Standard Materials for Pump Parts Acc. To API used in NoDoC for costing of Pumps
Material Class Applications U.S.A. International
ISO Europe Japan JIS
ASTM UNS EN Std Symbol Material No
A 473 Type 416 X 20 Cr S 13 1.4005 420 A582 Type 416 X 20 Cr S 13 1.4005
Bolts and Studs A 193 Gr B6 S 41 000 EN 10269 X22CrMoV 12-1 1.4923 G4303, Gr SUS 403 or 420
Nuts A 194 Gr 6 S 41 000 EN 10269 X22CrMoV 12-1 1.4923 G4303, Gr SUS 403 or 420
Plate A 240 Type 410 S 41 000 683-13-3 EN 10088-2 X 12 Cr 13 1.4006 G4304/4305
or 410
Austenitic Stainless Steel
Pressure Castings A 351 Gr CF3 J 92 500 683-13-10 EN 10213-
4 GX2 Cr Ni 19-11 1.4309 G 5121, C1 SCSI 3A
A 351 Gr CF3M J 92 800 683-13-19 EN 10213-4
GX2 Cr Ni Mo 19-11-2 1.4409 G 5121, C1
SCS I 4A 02M
General Castings A 743 Gr CF3 J 92 500 EN 10283 GX2 Cr Ni 19-11 1.4309
A 743 Gr CF3M J 92 800 EN 10283 GX2 Cr Ni Mo 19-11-2 1.4409
Wrought / Forgings
A 182 Gr F 304L S 30 403 683-13-10
EN 10222-5 EN 10250-4
X2 Cr Ni 19-11 1.4306 G 3214, C1 SUS F 304 L
A 182 Gr F 316L S 31 603 683-13-19
EN 10222-5 EN 10250-4
X2 Cr Ni Mo 17-12-2 1.4404 G 3214, C1
SUS F 316 L
Bar Stock
A 479 Type 304L S 30 403 683-13-10 EN 10088-
3 X2 Cr Ni 19-11 1.4306 G 4303, SUS F 304L
A 479 Type 316L S 31 603 683-13-19 EN 10088-
3 X2 Cr Ni Mo 17-12-2 1.4404 G 4303, SUS F
316L
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3,Part one
Mechanical Equipment
Page 79 of 279
International Standard Materials for Pump Parts Acc. To API used in NoDoC for costing of Pumps
Material Class Applications U.S.A. International
ISO Europe Japan JIS
ASTM UNS EN Std Symbol Material No
A 479 Type XM19d S 20910 See National
Standards
Plate A 240 Gr 304L / 316L
S 30 403 S 31 603
683-13-10 683-13-19
EN 10028-7 EN 10028-7
X2 Cr Ni 19-11 X2 Cr Ni Mo 17-12-2
1.4306 1.4404
G 4304/5, Gr 304L/ 316L
Pipe A 312 Type 304L 316L
S 30 403 S 31 603
683-13-10 683-13-19 See National
Standards G 3459, Gr 304 LTP/ 316LTP
Fittings A 182 Gr F304L Gr 316L
S 30 403 S 31 603
683-13-10 683-13-19
EN 10222-5
X2 Cr Ni 19-11 X2 Cr Ni Mo 17-12-2
1.4306 1.4404
G 3214, Dr SUS 304L 316L
Bolts and Studs A 193 Gr B 8 M S 31 600 683-1-21 EN 10250-4
X6 Cr Ni Mo Ti 17-12-2 1.4571 G 4303, Grl
SUS 316
Nuts A 194 Gr B 8 M S 31 600 682-1-21 EN 10250-4
X6 Cr Ni Mo Ti 17-12-2 1.4571 G 4303, Grl
SUS 316
Duplex Stainless Steel
Pressure Castings
A 351 Gr CD4 MCu A 890 Gr 1 B
J93370 J 93372 EN 10213-
4 GX2 CrNiMoCuN 25-6-3-3 1.4517
A 890 Gr 3A J93371 See National Standards G 5121, C1
SCS 11
A 890 Gr 4A J92205 EN 10213-4
GX2 CrNiMoCuN 25-6-3-3 1.4517
Wrought / Forgings A 182 Gr F 51 S 31803 EN 10250-4 EN 10222-5
X2 Cr Ni Mo N 22-5-3 1.4462 G 4319, C1
SUS 329
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3,Part one
Mechanical Equipment
Page 80 of 279
International Standard Materials for Pump Parts Acc. To API used in NoDoC for costing of Pumps
Material Class Applications U.S.A. International
ISO Europe Japan JIS
ASTM UNS EN Std Symbol Material No
A 479 (German proposal) S 32550 EN 10088-
1 X2 Cr Ni Mo Cu N 25-6-3 1.4507
Bar Stock A276-S31803 S 31 803 EN 10088-3
X2 Cr Ni Mo N 22-5-3 1.4462
G 4303, Grl SUS 329 Gr SUS 329
Plate A240-S31803 S 31 803 EN 10028-7
X2 Cr Ni Mo N 22-5-3 1.4462 G 4303, Gr
SUS 329
Pipe A790-S31803 S 31 803 See National Standards G 3459, Gr
SUS 329
Fittings A 182 Gr F 51 S 31803 EN 10250-4 EN 10222-5
X2 Cr Ni Mo N 22-5-3 1.4462
Bolts and Studs A276-S31803 S 31 803 EN 10088-3
X2 Cr Ni Mo N 22-5-3 1.4462 G 4303, Gr
SUS 329
Nuts A276-S31803 S 31 803 EN 10088-3
X2 Cr Ni Mo N 22-5-3 1.4462 G 4303, Gr
SUS 329
Super Duplex Steel Stainless Steel
Pressure Castings
A 351 Gr CD3MWCuN J93380 See National
Standards
A 890 Gr 5A J93404 EN 10213-4
GX2 Cr Ni Mo N 26-7-4 1.4469
A 890 Gr 6A J93380 See National Standards
Wrought / Forgings A 182 Gr 55 S 32 760 EN 10250-4 EN 10088-3
X2 Cr Ni Mo Cu WN 25-7-4 1.4501
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3,Part one
Mechanical Equipment
Page 81 of 279
International Standard Materials for Pump Parts Acc. To API used in NoDoC for costing of Pumps
Material Class Applications U.S.A. International
ISO Europe Japan JIS
ASTM UNS EN Std Symbol Material No
Bar Stock A276-S32760 A479-S32760 S 32 760 EN 10088-
3 X2 Cr Ni Mo Cu WN 25-7-4 1.4501
Plate A240-S32760 S 32 760 EN 10028-7
X2 Cr Ni Mo Cu WN 25-7-4 1.4501
Pipe A790-S32760 S 32 760 See National Standards
Fittings A 182 Gr F55 S 32 760 EN 10250-4 EN 10088-3
X2 Cr Ni Mo Cu WN 25-7-4 1.4501
Bolts and Studs A276-S32760 S 32 760 EN 10088-3
X2 Cr Ni Mo Cu WN 25-7-4 1.4501
Nuts A276-S32760 S 32 760 EN 10088-3
X2 Cr Ni Mo Cu WN 25-7-4 1.4501
Nonmetallic Wear Part Materials PEEK Chopped carbon fiber
PEEK Continuous carbon fiber wound
Polyamide
Carbon graphite Resin impregnated Babbitt impregnated Nickel impregnated Copper impregnated
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 82 of 279
30006001-Centrifugal Pump
Database name Centrifugal Pump Level of estimate Detailed
Database code 30006001 Version 3.0.306
Standard API 610 Date Feb. 2014
Centrifugal Pump Costing Parameters Seal type Packing
Single mechanical seal Tandem mechanical seal Double mechanical seal
Pump driver type No driver
Standard motor driver Variable frequency motor driver
Turbine driver Gas engine driver
Power Min: 10 kW
Max: 10000 kW Step : 50
Volumetric flow Min: 5 m3/hr
Max: 2000 m3/hr
Step : 50
Delta P Min: 1 bar
Max: 500 bar Step : 50
Services
Sweet
Sour
Number of Records: 220,722,840
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 83 of 279
30006002-Reciprocating Pump
Database name Reciprocating Pump Level of estimate Detailed
Database code 30006002 Version 3.0.306
Standard API 674 Date Feb. 2014
Continue Reciprocating Pump Costing Parameters
Seal type Packing
Single mechanical seal Tandem mechanical seal Double mechanical seal
Pump driver type No driver
Standard motor driver Variable frequency motor driver
Turbine driver Gas engine driver
Power Min: 10 kW
Max: 10000 kW Step : 50
Volumetric flow Min: 5 m3/hr
Max: 2000 m3/hr
Step : 50
Delta P Min: 1 bar
Max: 500 bar Step : 50
Services
Sweet
Sour
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 84 of 279
30006003-Vacuum Pump
Database name Vacuum Pump Level of estimate Detailed
Database code 30006003 Version 3.0.306
Standard API 681 Date Feb. 2014
Vacuum Pump Costing Parameters
Seal type Packing
Single mechanical seal Tandem mechanical seal Double mechanical seal
Pump driver type No driver
Standard motor driver Variable frequency motor driver
Turbine driver Gas engine driver
Power Min: 10 kW
Max: 2000 kW Step : 5
Volumetric flow Min: 5 m3/hr
Max: 350 m3/hr
Step : 5
Delta P Min: 0.5 bar
Max: 100 bar Step : 1
Services
Sweet
Sour
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 85 of 279
30006004-Rotary, Gear Pump
Database name Rotary, Gear Pump Level of estimate Detailed
Database code 30006004 Version 3.0.306
Standard API 676 Date Feb. 2014
Rotary, Gear Pump Costing Parameters
Number of Records: 17,269,204,080
Seal type Packing
Single mechanical seal Tandem mechanical seal Double mechanical seal
Pump driver type No driver
Standard motor driver Variable frequency motor driver
Turbine driver Gas engine driver
Power Min: 10 kW
Max: 2000 kW Step : 5
Volumetric flow Min: 5 m3/hr
Max: 350 m3/hr
Step : 5
Delta P Min: 0.5 bar
Max: 200 bar Step : 1
Services
Sweet
Sour
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 86 of 279
30006005-Vertical Pump
Database name Vertical Pump Level of estimate Detailed
Database code 30006005 Version 3.0.306
Standard API 610 Date Feb. 2014
Vertical Pump Costing Parameters Seal type Packing
Single mechanical seal Tandem mechanical seal Double mechanical seal
Pump driver type No driver
Standard motor driver Variable frequency motor driver
Turbine driver Gas engine driver
Power Min: 10 kW
Max: 2000 kW Step : 5
Volumteric flow Min: 5 m3/hr
Max: 350 m3/hr
Step : 5
Delta P Min: 0.5 bar
Max: 200 bar Step : 1
Services
Sweet
Sour
Number of Records: 17,269,204,080
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 87 of 279
30006006-Sump and Well Pump
Database name Sump and Well Pump Level of estimate Detailed
Database code 30006006 Version 3.0.306
Standard API 610 Date Feb. 2014
Sump and Well Pump Costing Parameters Seal type
Packing Single mechanical seal
Tandem mechanical seal Double mechanical seal
Pump driver type No driver
Standard motor driver Variable frequency motor driver
Turbine driver Gas engine driver
Power Min: 10 kW
Max: 2000 kW Step : 5
Volumteric flow Min: 5 m3/hr
Max: 350 m3/hr
Step : 5
Delta P Min: 0.5 bar
Max: 200 bar Step : 1
Services
Sweet
Sour
Number of Records: 17,269,204,080
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 88 of 279
30006007-Slurry Pump
Database name Slurry Pump Level of estimate Detailed
Database code 30006007 Version 3.0.306
Standard API 610 Date Feb. 2014
Slurry Pump Costing Parameters Seal type Packing
Single mechanical seal Tandem mechanical seal Double mechanical seal
Pump driver type No driver
Standard motor driver Variable frequency motor driver
Turbine driver Gas engine driver
Power Min: 10 kW
Max: 2000 kW Step : 5
Volumteric flow Min: 5 m3/hr
Max: 350 m3/hr
Step : 5
Delta P Min: 0.5 bar
Max: 200 bar Step : 1
Services
Sweet
Sour
Number of Records: 17,269,204,080
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 89 of 279
30006008-Diaphragm, Duplex
Database name Diaphragm,Duplex Level of estimate Detailed
Database code 30006008 Version 3.0.306
Standard API 610 Date Feb. 2014
Diaphragm, Duplex Costing Parameters Seal type
Packing Single mechanical seal
Tandem mechanical seal Double mechanical seal
Pump driver type No driver
Standard motor driver Variable frequency motor driver
Turbine driver Gas engine driver
Power Min: 10 kW
Max: 10000 kW Step : 50
Volumetric flow Min: 5 m3/hr
Max: 2000 m3/hr
Step : 50
Delta P Min: 1 bar
Max: 500 bar Step : 50
Services
Sweet
Sour
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 90 of 279
30006009-Diaphragm, Simplex
Database name Diaphragm, Simplex Level of estimate Detailed
Database code 30006009 Version 3.0.306
Standard API 610 Date Feb. 2014
Diaphragm, Simplex Costing Parameters
Seal type Packing
Single mechanical seal Tandem mechanical seal Double mechanical seal
Pump driver type No driver
Standard motor driver Variable frequency motor driver
Turbine driver Gas engine driver
Power Min: 10 kW
Max: 10000 kW Step : 50
Volumetric flow Min: 5 m3/hr
Max: 2000 m3/hr
Step : 50
Delta P Min: 1 bar
Max: 500 bar Step : 50
Services
Sweet
Sour
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 91 of 279
30006010-Piston Pump
Database name Piston Pump Level of estimate Detailed
Database code 30006010 Version 3.0.306
Standard API 610 Date Feb. 2014
Piston Pump Costing Parameters
Seal type Packing
Single mechanical seal Tandem mechanical seal Double mechanical seal
Pump driver type No driver
Standard motor driver Variable frequency motor driver
Turbine driver Gas engine driver
Power Min: 10 kW
Max: 10000 kW Step : 50
Volumetric flow Min: 5 m3/hr
Max: 2000 m3/hr
Step : 50
Delta P Min: 1 bar
Max: 500 bar Step : 50
Services
Sweet
Sour
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 92 of 279
30006011-Progressive Cavity Pump
Database name Progressive Cavity Pump Level of estimate Detailed
Database code 30006011 Version 3.0.306
Standard API 610 Date Feb. 2014
Progressive Cavity Pump Costing Parameters
Seal type Packing
Single mechanical seal Tandem mechanical seal Double mechanical seal
Pump driver type No driver
Standard motor driver Variable frequency motor driver
Turbine driver Gas engine driver
Power Min: 10 kW
Max: 10000 kW Step : 50
Volumetric flow Min: 5 m3/hr
Max: 2000 m3/hr
Step : 50
Delta P Min: 1 bar
Max: 500 bar Step : 50
Services
Sweet
Sour
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 93 of 279
30006012-Rotary, Sliding Vane Pump
Database name Rotary, Sliding Vane Pump Level of estimate Detailed
Database code 30006012 Version 3.0.306
Standard API 610 Date Feb. 2014
Rotary, Sliding Vane Pump Costing Parameters
Seal type Packing
Single mechanical seal Tandem mechanical seal Double mechanical seal
Pump driver type No driver
Standard motor driver Variable frequency motor driver
Turbine driver Gas engine driver
Power Min: 10 kW
Max: 10000 kW Step : 50
Volumetric flow Min: 5 m3/hr
Max: 2000 m3/hr
Step : 50
Delta P Min: 1 bar
Max: 500 bar Step : 50
Services
Sweet
Sour
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 94 of 279
30007-Storage Tank
Following standards have been considered for costing of storage tank in NoDoC database:
API Standard Title Description
API-620 Design and Construction of Large, Welded, Low Pressure Storage Tanks
Guide for construction of tanks with internal pressures up to 15 psig. For large tanks which are assembled in field and are used for storage of petroleum intermediates and petroleum products.
API 650 Welded Steel Tanks for Oil Storage
This document governs the construction of tanks storing hydrocarbon products at low operating pressure (up to 2.5 psig).
API-651 Cathodic Protection for Above Ground Petroleum Storage Tanks
Discussion on corrosion problems in above ground petroleum storage tanks and associated piping. Plus description of two commonly used methods of providing cathodic protection against corrosion.
API-652 Lining of Above Ground Petroleum Storage Tanks
Guide effectively limiting corrosion by lining the tank bottom, for hydrocarbon storage tank made of steel. Guidelines are given regarding lining materials, their applications, inspection of tank bottom lining etc.
API-653 Tank Inspection, Repair, Alteration, and Reconstruction
Guideline for inspection, repair, alteration, and reconstruction of above ground hydrocarbon and chemical storage tanks, made of steel. Minimum requirements for maintaining the integrity of welded or riveted, non-refrigerated, atmospheric, above ground storage tanks, are discussed.
API-2000 Venting Atmospheric and Low-Pressure Storage Tanks
Guide for normal and emergency vapor venting requirements for above ground petroleum and petroleum product storage tanks, above ground and underground refrigerated storage tanks. The tanks discussed in the document are designed for low pressures ranging from full vacuum through 15 psig.
API-2015 Cleaning Petroleum Storage Tanks
Guide for preparing, emptying, isolating,ventilating, atmospheric testing, cleaning, entering into, hotwork and recommissioning activities in, on and around atmospheric and low-pressure (up to 15 psig) above ground storage tanks containing flammable, combustible or toxic materials.
API-2517 Evaporating Losses from External Floating Roof Tanks
Guide for estimating the total evaporation losses or atmospheric hydrocarbon emissions from external floating roof tanks containing multicomponent hydrocarbon mixtures or single component storage stocks.
API-2519 Evaporating Losses from Internal Floating Roof Tanks
Summary of performances of internal floating covers to prevent evaporation losses. Effects of internal floating covers on tank
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 95 of 279
API Standard Title Description operation as well as the provisions for gaging, sampling, and temperature reading are described in the document.
API-2350 Overfill Protection for Petroleum Storage Tankss
Covers overfill protection for all aboveground storage tanks in petroleum facilities, including refineries, terminals, bulk plants and pipeline terminals that receive Class I (flammable) or Class II (combustible) liquids.
API-2550 Measurements and Calibration of Petroleum Storage Tanks
Procedures for calibrating upright cylindrical tanks which are larger than a drum or a barrel. Procedures for making measurements are discussed in Part I of the document and methods of calculating the tank volume are given in Part II.
Materials considered in the NoDoC database for storage tanks are as follows:
1- Plates
a. ASTM A 36MI A 36 for plates to a maximum thickness of 40 mm (1.5 in b. ASTM A 131M/A 131, Grade A, for plates to a maximum thickness of 13 mm (0.5 in.); Grade B for plates to a maximum thickness of 25 mm (1 in.); and Grade EH36 for plates to a maximum thickness of 45 mm (1.75 in.). c. ASTM A 283MI A 283, Grade C, for plates to a maximum thickness of 25 mm (1 in.). d. ASTM A 285M/A 285, Grade C, for plates to a maximum thickness of 25 mm (1 in.). e. ASTM A 516M Grades 380,415,450, 485/A 516, Grades 55, 60, 65, and 70, for plates to a maximum thickness of 40 mm (1.5 in.). f. ASTM A 537M/A 537, Class 1 and Class 2, for plates to a maximum thickness of 45 mm (1.75 in.). g. ASTM A 573M Grades 400,450, 485/A 573, Grades 58, 65, and 70, for plates to a maximum thickness of 40 mm (1.5 in.). h. ASTM A 633M/A 633, Grades C and D, for plates to a maximum thickness of 45 mm (l.75 in.). i. ASTM A 662M/A 662, Grades Band C, for plates to a maximum thickness of 40 mm (1.5 in.). j. ASTM A 678M/A 678, Grade A, for plates to a maximum thickness of 40 mm (1.5 in.) and Grade B for plates to a maximum thickness of 45 mm (1.75 in.). k. ASTM A 737M/A 737, Grade B, for plates to a maximum thickness of 40 mm (1.5 in.). l. ASTM A 841M/A 841 Grade A, Class 1 and Grade B, Class 2 for plates to a maximum thickness of 40 mm (1.5 in.)
Plate furnished to ISO 630 in Grades E 275 and E 355 is considered within the following materials:
a. Grade E 275 in Qualities C and D for plate to a maximum thickness of 40 mm (1.5 in.).
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 96 of 279
b. Grade E 355 in Qualities C and D for plate to a maximum thickness of 45 mm (l.75 in.) Plate furnished to EN 10025 in Grades S 275 and S 355 is considered within the following materials:
a. Grade S 275 in Qualities 10 and 12 for plate to a maximum thickness of 40 mm (1.5 in.). b. Grade S 355 in Qualities JO, 12 and K2 for plate to a maximum thickness of 45 mm (1.75 in.)
Structural steel considered in NoDoC based on the following standards:
a. ASTM A 36MI A 36. b. ASTM A 131M/A 131. c. ASTM A 992MI A 992. d. Structural Steels listed in AISC Specification for Structural Steel Buildings. e. CSA G40.21, Grades 260W(38W), 300W(44W), 350W(50W), 260WT(38WT), 300\VT(44WT), and 350WT(50WT). f. ISO 630, Grade E 275, Qualities B, C, and D. g. EN 10025, Grade S 275, Qualities JR, JO, and J2.
1- Piping and connections
NoDoC considered following material standards for tank piping and connections:
a. API Spec 5L, Grades A, B, and X42.
Material Groups Group I As Rolled, Semi-
Killed Group II As Rolled, Killed or
Semi-Killed Group III As Rolled, Killed
Fine-Grain Practice Group lIlA Normalized, Killed
Fine-Grain Practice Material Material Material Material
A 283M C 2 A285MC 2
A 131M A 2 A36M 2, 3 Grade 235 3
Grade 250 5 Group IV As Rolled, Killed Fine-Grain
Practice
A 131M B 6 A36M 2, 5
G40.21-260W Grade 250 7
Group IVA As Rolled, Killed Fine-Grain Practice
A 573M-400 A 516M-380 A 516 1-415
G40.21-260W 8 Grade 250 8
Group V Normalized, Killed Firle-Grain Practice
A 573M-400 9 A 516M-380 9 A 516M-415 9
G40.21-260W 8,9 Grade 250 8,9 Group VI
Normalized or Quenched and Tempered, Killed Fine-Grain
Practice Reduced Carbon Material Material Material Material
A 573M-450 A 573M-485 A 516M-450 A 516M-485
A662MB G40,21-300W G40.21-350W
E 275 C E 355 C
A662MC A 573M-485
G40.21-300W G40.21-350W
E 275 D E 355
S 275 JO S 355 JO
A 573M-485 A 516M-450 A 516M-485
G40.21-300W G40.21-350W
A 131M EH 36 A633MC A633MD
A 537M Class 1 A 537M Class 2
A678MA A678MB
A 737M B A841M, Grade A, Class 1
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 97 of 279
b. ASTM A 53MI A 53, Grades A and B. c. ASTM A 106 MIA 106, Grades A and B. d. ASTM A 234M/A 234, Grade WPB. e. ASTM A 333MI A 333, Grades 1 and 6. f. ASTM A 334M/A 334, Grades 1 and 6 g. ASTM A 420MI A 420, Grade WPL6. h. ASTM A 524, Grades I and II. i. ASTM A 105MI A lOS. g. ASTM A 181M/A 18l. k. ASTM A 3S0M/A 3S0, Grades LF1 and LF2. l. ASTM A 671
For flanged and forged materials the same standards have been considered.
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 98 of 279
30007001-API, Cone Roof, Field Fabrication Tank
30007002-Tank API, Cone Roof, Shop Fabrication Tank
30007003-API, Floating Roof Tank
30007004-Horizontal Fuel Storage Tank
30007005-Horizontal Round Ends Tank
30007006-Vertical Cone Roof, Flat Bottom Tank
30007007-Vertical Cone Top & Bottom Tank
30007008-Vertical Shop Fabrication
30007009-Field-erected Tank
30007010-Bullet Tank
30007011-Settle Tank
30007012-Off-Spec Tank
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 99 of 279
Database name Storage Tank Level of estimate Detailed
Database code 30007 Version 3.0.306
Standard API 650 620 Date Feb. 2014
Storage Tank Costing Parameters
Connections Flanged welded
Threaded
Volume, m^3 Min. 10
Max. 210000 Step: 100
Pressure Atmospheric
Number of Courses Min. 2
Max. 16 Step: 2
Fluid Corrosive
Non Corrosive
Fluid Temperature °C Min. 10 Max. 60 Step 10
Consider Cathodic Protection
Yes No
Consider Openings Yes No
Consider Heating Coil Yes No
Consider Connections Yes
No
Consider Tank Anchorage Yes No
Consider Shell Attachments and Tank Appurtenances
Yes No
Consider Top and Intermediate Stiffening
Rings Yes No
Consider instrumentation and
control Yes No
Consider Sealing Yes No
Consider Tset Yes No For i
nformatio
n only
,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 100 of 279
30008-Pressure Vessel Materials used in NoDoC for costing of Pressure Vessels which have been extracted from ASME Section VIII Div, are shown in the following table.
Type of material Subsection C Material tables Carbon and Low Alloy Steels
Part UCS UCS 23
Nonferrous Materials Part UNF
UNF 23.1 – Aluminum and Aluminum Alloys UNF 23.2 – Copper and Copper Alloys UNF 23.3 – Nickel, Cobalt and High Nickel Alloys UNF 23.4 – Titanium and Titanium Alloys UNF 23.5 – Zirconium
High Alloy Steels Part UHA UHA 23 Cast Iron Part UCI UCI 23 Cast Ductile Iron Part UCD UCD 23
UNS Series Metal type(s)
A00001 to A99999 Aluminum and aluminum alloys
C00001 to C99999 Copper and copper alloys
F00001 to F99999 Cast irons G00001 to G99999 AISI and SAE carbon and alloy steels (except tool steels) J00001 to J99999 Cast steels (except tool steels) N00001 to N99999 Nickel and nickel alloys R00001 to R99999 Reactive and refractory metals and alloys
S00001 to S99999 Heat and corrosion resistant (stainless) steels
Following tables shows the list of materials that are the detailed list of materials.
CARBON AND LOW ALLOY STEEL
Spec. No. Type/Grade Spec. No. Type/Grade Spec. No. Type/Grade
SA-36 . . . SA-302 A, B, C, D SA-508 1, 1A, 2 Cl. 1, 3 Cl. 1, 3V, 4N Cl. 3, 22 Cl. 3 SA-53 E/A, E/B, S/A, S/B SA-307 B SA-515 60, 65, 70 SA-105 . . . SA-320 L7, L7A, L7M, L43 SA-516 55, 60, 65, 70 SA-106 A, B, C SA-325 1 SA-524 I, II SA-135 A, B SA-333 1, 3, 4, 6, 7, 9 SA-533 A Cl. 1 & 2, B Cl. 1 & 2, SA-178 A, C SA-334 1, 3, 6, 7, 9 C Cl. 1 & 2, D Cl. 2 SA-179 . . . SA-335 P1, P2, P5, P5b, P5c, SA-537 Cl.1, 2, & 3 P9, P11, P12, P15, SA-540 B21, B22, B23, B24, SA-181 . . . P21, P22, P91 B24V
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 101 of 279
CARBON AND LOW ALLOY STEEL
Spec. No. Type/Grade Spec. No. Type/Grade Spec. No. Type/Grade
SA-182 FR, F1, F2, F3V, F5, SA-336 F1, F3V, F5, F5A, F9,
F5a, F9, F11 Cl. 1 & F11 Cl. 2 & 3, F12, SA-541 1, 1A, 2 Cl. 1, 3 Cl. 1, 3V,
2, F12 Cl. 1 & 2, F21 Cl. 1 & 3, F22 Cl. 22 Cl. 3, 22V
F21, F22 Cl. 1 & 3, 1 & 3, F22V, F91, SA-542 B Cl. 4, C Cl. 4a, D Cl. 4a
F22V, F91 F304, F304H, F304L, F304N, F310, F316, SA-556 A2, B2, C2 SA-192 . . . F316H, F316L, SA-557 A2, B2, C2 SA-193 B5, B7, B7M, B16 F316N, F321, F321H, SA-199 T5, T9, T11, T21, T22 F347, F347H, F348, SA-562 . . . F348H, FXM-11, SA-202 A, B FXM-27Cb SA-574 . . . SA-203 A, B, D, E, F SA-204 A, B, C SA-350 LF1, LF2, LF3, LF5, LF9 SA-587 . . . SA-209 T1, T1a, T1b SA-210 A-1, C SA-352 LCB, LC1, LC2, LC3 SA-612 . . . SA-354 BC, BD SA-213 T2, T5, T5b, T5c, T9, SA-620 . . . T11, T12, T17, T21, SA-369 FP1, FP2, FP5, FP9, T22, T91 FP11, FP12, FP21, SA-662 A, B, C SA-214 . . . FP22 SA-216 WCA, WCB, WCC SA-675 45, 50, 55, 60, 65, 70 SA-217 C12, C5, WC1, WC4, SA-372 A, B, C, D, E Cl. 65 & 70, WC5, WC6, WC9 F Cl. 70, G Cl. 70, SA-695 B/35, B/40 H Cl. 70, J Cl. 65, 70, & SA-225 C 110, L, M Cl. A & B SA-727 . . . SA-226 . . . SA-387 2, 5, 11, 12, 21, 22, 91 SA-737 B, C SA-234 WPB, WPC, WPR, WP1, SA-738 A, B, C WP5, WP9, WP11 Cl. 1, SA-414 A, B, C, D, E, F, G SA-739 B11, B22 WP12 Cl. 1, WP22 Cl. 1 SA-420 WPL 3, WPL 6, WPL 9 SA-765 I, II, III SA-250 T1, T1a, T1b SA-423 1, 2 SA-812 65, 80 SA-266 1, 2, 3, 4 SA-437 B4B, B4C SA-832 21V, 22V SA-283 SA-285
A, B, C, D A, B, C SA-449 . . . SA-836 . . .
SA-455 . . . SA-299 . . . SA/CSA-
G40.21 38W
SA-487 1 Cl. A & B, 2 Cl. A & B, 4 Cl. A, 8 Cl. A
NONFERROUS METALS — ALUMINUM AND ALUMINUM ALLOY PRODUCTS Spec. No.
Alloy Design./UNS No. Spec. No.
Alloy Desig./UNS No.
SB-26 A02040, A03560, A24430 SB-221 A91060, A91100, A92024, A93003, A95083,
A95086, A95154, A95454, A95456, A96061, SB-108 A02040, A03560 A96063
SB-209 Alclad 3003, 3004, 6061; A91060, A91100, SB-234 Alclad 3003; A91060, A93003, A95052, A95454,
A93003, A93004, A95052, A95083, A95086, A96061
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 102 of 279
A95154, A95254, A95454, A95456, A95652, A96061 SB-241 Alclad 3003; A91060, A91100, A93003,
A95052, A95083, A95086, A95454,A95456, A96061, SB-210 Alclad 3003; A91060, A93003, A95052, A96063 A95154, A96061, A96063 SB-247 A92014, A93003, A95083, A96061 SB-211 A92014, A92024, A96061
SB-308 A96061
NONFERROUS METALS — COPPER AND COPPER ALLOYS
Spec. No. UNS No. Spec. No. UNS No.
SB-42 C10200, C12000, C12200 SB-171 C36500, C44300, C44400, C44500, C46400,
SB-43 C23000 C46500, C61400, C63000, C70600, C71500
SB-61 C92200 SB-187 C10200, C11000
SB-62 C83600 SB-271 C95200
SB-75 C10200, C12000, C12200, C14200 SB-283 C37700, C64200
SB-96 C65500 SB-315 C65500
SB-98 C65100, C65500, C66100 SB-359 C70600
SB-111 C10200,C12000, C12200, C14200, C19200, C23000, C28000, C44300, C44400, C44500, C60800, C68700, C70400, C70600, C71000,
SB-395 C10200, C12000, C12200, C14200, C19200, C23000, C44300, C44400, C44500, C60800, C68700, C70600, C71000, C71500
C71500, C72200 SB-466 C70600, C71000, C71500 SB-135 C23000 SB-467 C70600
SB-148 C95200, C95400 SB-543 C12200, C19400, C23000, C44300, C44400,
SB-150 C61400, C62300, C63000, C64200 C44500, C68700, C70400, C70600, C71500
SB-152 C10200, C10400, C10500, C10700, C11000, SB-584 C92200, C93700, C97600
C12200, C12300
SB-169 C61400
NONFERROUS METALS — NICKEL AND HIGH NICKEL ALLOYS Spec. No. UNS No. Spec. No.
UNS No.
SB-626 N06002, N06007, N06022, N06030,
N06059, SB-677 N08904, N08925
N06455, N06975, N06985, N08320,
N10001,
N10276, N10665, R30556 SB-688 N08366, N08367
SB-637 N07718, N07750 SB-690 N08366, N08367
SB-649 N08904, N08925 SB-691 N08366, N08367
SB-668 N08028 SB-704 N06625, N08825
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 103 of 279
SB-672 N08700 SB-705 N06625, N08825
SB-673 N08904, N08925 SB-709 N08028
SB-674 N08904, N08925 SB-710 N08330
SB-675 N08366, N08367 SB-729 N08020
SB-676 N08366, N08367 SB-804 N08367
NONFERROUS METALS — TITANIUM AND TITANIUM ALLOYS
Spec. No. UNS No.
Spec. No. UNS No.
SB-265 R50250, R50400, R50550, R52250, R52252, R52400,
SB-363 R50250, R50400, R50550, R52400, R53400
R52402, R53400, R56320 SB-367 R50400, R50550 SB-337 R50250, R50400, R50550, R52400, R53400,
R56320
SB-381 R50250, R50400, R50550, R52400, R52402, SB-338 R50250, R50400, R50550, R52400, R52402,
R53400, R53400
R56320
SB-348 R50250, R50400, R50550, R52400, R52402, R53400
NONFERROUS METALS — ZIRCONIUM
Spec. No. UNS No. Spec. No. UNS No.
SB-493 SB-523 SB-550
R60702, R60702, R60702,
R60705 R60705 R60705
SB-551 SB-658 R60702, R60705 R60702, R60705
HIGH ALLOY STEEL
Spec. No. UNS No. Type/Grade Spec. No. UNS
No. Type/Grade Spec. No.
UNS No. Type/Grade
SA-182 S20910 FXM-19 S34800 TP348 S44700 . . .
S21904 FXM-11 S34809 TP348H S44800 . . . S30400 F304 S38100 XM-15 S30403 F304L SA-249 S20910 TPXM-19 S30409 F304H SA-217 J91150 CA15 S24000 TPXM-29 S30815 F45 S30400 TP304
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 104 of 279
HIGH ALLOY STEEL
Spec. No. UNS No. Type/Grade Spec. No. UNS
No. Type/Grade Spec. No.
UNS No. Type/Grade
S31000 S31254 S31600 S31603 S31609 S31700 S31703 S31803 S32100 S32109 S34700 S34709 S34800 S34809 S41000 S44627
F310 F44 F316 F316L F316H F317 F317L F51 F321 F321H F347 F347H F348 F348H F6a Cl. 1 & 2 FXM-27Cb
SA-240 S20100 S20400 S20910 S24000 S30200 S30400 S30403 S30409 S30451 S30815 S30908 S30909 S30940 S31008 S31009 S31040
201-1, 201-2 204 XM-19 XM-29 302 304 304L 304H 304N . . . 309S 309H 309Cb 310S 310H 310Cb
S30403 S30409 S30451 S30815 S30908 S30909 S30940 S31008 S31009 S31040 S31050 S31254 S31600 S31603 S31609 S31651
TP304L TP304H TP304N . . . TP309S TP309H TP309Cb TP310S TP310H TP310Cb TP310MoLN . . . TP316 TP316L TP316H TP316N
S31050 310MoLN S31700 TP317 SA-193 S21800 B8S, B8SA S31200 . . . S31703 TP317L S30400 B8 Cl. 1 & 2 S31254 . . . S31725 . . . S30451 B8NA Cl. 1A S31260 . . . S32100 TP321 S30500 B8P Cl. 1 &
2 S31600 316 S32109 TP321H
S31600 B8M Cl.1& 2,
S31603 316L S34700 TP347
B8M2 Cl. 2 S31609 316H S34709 TP347H S31651 B8MNA Cl.
1A S31635 316Ti S34800 TP348
S32100 B8T Cl. 1 & 2
S31640 316Cb S34809 TP348H
S34700 B8C Cl. 1 & 2
S31651 316N S38100 TPXM-15
S41000 B6 S31700 317 S31703 317L SA-268 S40500 TP405 SA-213 S20910 XM-19 S31725 . . . S40800 . . . S30400 TP304 S31803 . . . S40900 TP409 S30403 TP304L S32100 321 S41000 TP410 S30409 TP304H S32304 . . . S42900 TP429 S30451 TP304N S32550 . . . S43000 TP430 S30815 . . . S32900 329 S43035 TP439 S30908 TP309S S32950 . . . S44400 . . . S30909 TP309H S34700 347 S44600 TP446-1, S30940 TP309Cb S34709 347H TP446-2 S31008 TP310S S34800 348 S44626 XM-33 S31009 TP310H S38100 XM-15 S44627 XM-27 S31040 TP310Cb S40500 405 S44635 . . . S31050 TP310MoLN S40900 409 S44660 26-3-3 S31600 TP316 S41000 410 S44700 29-4 S31603 TP316L S41008 410S S44735 . . . S31609 TP316H S42900 429 S44800 29-4-2 S31651 TP316N S43000 430 S31725 . . . S44000 . . . SA-312 S20910 TPXM-19 S32100 TP321 S44626 XM-33 S21904 TPXM-11
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 105 of 279
HIGH ALLOY STEEL
Spec. No. UNS No. Type/Grade Spec. No. UNS
No. Type/Grade Spec. No.
UNS No. Type/Grade
S32109 TP321H S44627 XM-27 S24000 TPXM-29 S34700 TP347 S44635 . . . S30400 TP304 S34709 TP347H S44660 26-3-3 S30403 TP304L
S30409 TP304H J92600 CF8, CF8A S31600 FP316
S30451 TP304N J92710 CF8C S31609 FP316H S30815 . . . J92800 CF3M S31651 FP316N S30908 TP309S J92900 CF8M S32100 FP321 S30909 TP309H J93000 CG8M S32109 FP321H S30940 TP309Cb J93254 CK3MCuN S34700 FP347 S31008 TP310S J93345 CE8MN S34709 FP347H S31009 TP310H J93400 CH8 S31040 TP310Cb J93402 CH20 SA-452 S30409 TP304H S31050 TP310MoLN J93790 CG6MMN S31609 TP316H S31254 . . . J94202 CK20 S34709 TP347H S31600 TP316 . . . CT15C S31603
S31609 S31651
TP316L TP316H TP316N SA-358
J94651 S31254
CN-3MN . . .
SA-453 S63198 S66286
651 Cl. A & B 660 Cl. A & B
S31700 S31703 S31725 S32100 S32109 S34700 S34709 S34800 S34809 S38100
TP317 TP317L . . . TP321 TP321H TP347 TP347H TP348 TP348H TPXM-15
SA-376 S31725 S30400 S30409 S30451 S31600 S31609 S31651 S31725 S32100
. . . TP304 TP304H TP304N TP316 TP316H TP316N . . . TP321
SA-479 S20910 S24000 S30200 S30400 S30403 S30409 S30815 S30908 S30909 S30940
XM-19 XM-29 302 304 304L 304H . . . 309S 309H 309Cb
SA-320 S30323 S30400 S31600 S32100 S34700
B8F Cl. 1, B8FA Cl. 1A B8 Cl. 1 & 2, B8A Cl. 1A B8M Cl.1& 2, B8MA Cl. 1A B8T Cl. 1 & 2 B8C Cl. 1 & 2, B8CA Cl. 1A
SA-403
S32109 S34700 S34709 S34800 S20910 S30400 S30403 S30409 S30451
TP321H TP347 TP347H TP348 XM-19 304 304L 304H 304N
S31008 S31009 S31040 S31600 S31603 S31725 S32100 S32550 S34700 S34800
310S 310H 310Cb 316 316L . . . 321 . . . 347 348
S30900 309 S40500 405 SA-336 S21904 FXM-11 S31000 310 S41000 410 S30400 F304 S31600 316 S43000 430 S30403 F304L S31603 316L S43035 439 S30409 F304H S31609 316H S44627 XM-27 S30451 F304N S31651 316N S44700 . . . S31000 F310 S31700 317 S44800 . . . S31600 F316 S31703 317L S31603
S31609 F316L F316H
S32100 S32109
321 321H
SA-564 S17400 630
S31651 S32100 S32109
F316N F321 F321H
S34700 S34709 S34800
347 347H 348
SA-666 S20100 S21904
201-1, 201-2 XM-11
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 106 of 279
HIGH ALLOY STEEL
Spec. No. UNS No. Type/Grade Spec. No. UNS
No. Type/Grade Spec. No.
UNS No. Type/Grade
S34700 S34709
F347 F347H
S34809 348H SA-688 S24000 TPXM-29
S34800 S34809
F348 F348H SA-409 S31725 . . . S30400 S30403
TP304 TP304L
S44627 FXM-27Cb SA-430 S30400 FP304 S30451 S31600
TP304N TP316
SA-351 J92500 J92590
CF3, CF3A CF10
S30409 S30451
FP304H FP304N
S31603 TP316L
SA-705 S17400 630 SA-731 S44626 TPXM-33 SA-790 S31260 . . . SA-813 S30908 TP309S
S44627 TPXM-27 S31500 . . . S30940 TP309Cb
S31803 . . . S31008 TP310S SA-747 J92180 CB7Cu-1 S32304 . . . S31040 TP310Cb S32550 . . . SA-789 S31260
S31500 S31803
. . .
. . .
. . .
S32750 S32900 S32950
. . .
. . .
. . .
SA-814 S30908 S30940 S31008
TP309S TP309Cb TP310S
S32304 . . . S31040 TP310Cb S32550 . . . SA-803 S43035 TP439 S32750 . . . S44660 26-3-3 SA-815 S31803 . . . S32900 . . . S32950 . . .
FERRITIC STEELS WITH PROPERTIES ENHANCED BY HEAT TREATMENT
Spec. No. Type/Grade Spec. No. Type/Grade
SA-333 8
SA-522 I
SA-334 8 SA-533 B Cl. 3,
SA-353 . . . SA-543 B, C
SA-420 WPL8 SA-553 I, II
SA-487 4 Cl. B & E, CA6NM SA-592 A, E, F
SA-508 4N Cls. 1, 2 SA-645 . . .
SA-517 A, B, E, F, J, P SA-724 A, B, C
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 107 of 279
30008001-Column, No Internal
30008002-Horizontal Vessel, No Internal
30008003-Sphere Vessel
30008004-Stabilizer Column
30008005-K.O Drum
30008006-Air Receiver
30008007-Closed Drain Vessel
30008008-Still Column
30008009-Stripping Column
30008010-Surge Drum
30008011-Flash Drum
30008012-Sump Drum
30008013-Suction Drum
30008014-Settle Vessel
30008015-Pig Launcher
30008016-Pig receiver
30008017-Manifolds
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 108 of 279
Database name Pressure Vessel Level of estimate Detailed
Database code 30008 Version 3.0.306
Standard Date Feb. 2014
Pressure Vessels Costing Parameters
Vessel Height(m) Min. 0.5 Max. 20 Step: 0.5
Pressure (bar) Min. 1
Max. 100 Step: 5
Vessel Diameter(m) Min. 0.25 Max. 10 Step: 0.5
Connections Flanged welded
Threaded
Volume, m^3 Min. 10
Max. 1000 Step: 100
Fluid Type Gas / Air
Liquid
Number of Courses Min. 2
Max. 16 Step: 2
Fluid Corrosive
Non Corrosive
Fluid Temperature °C Min. -10 Max. 60 Step 10
Consider Cathodic Protection
Yes No
Consider Openings Yes No
Consider Heating Coil Yes No
Consider Connections Yes
No
Consider Tank Anchorage Yes No
Consider Shell Attachments and Tank Appurtenances
Yes No
Consider Top and Intermediate Stiffening
Rings Yes No
Consider instrumentation and
control Yes No
Consider Sealing Yes No
Consider Tset Yes No
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 109 of 279
30009-Reactor Materials used in NoDoC for costing of Rectors which have been extracted from ASME Section VIII Div, are shown in the following table.
Type of material Subsection C Material tables Carbon and Low Alloy Steels
Part UCS UCS 23
Nonferrous Materials Part UNF
UNF 23.1 – Aluminum and Aluminum Alloys UNF 23.2 – Copper and Copper Alloys UNF 23.3 – Nickel, Cobalt and High Nickel Alloys UNF 23.4 – Titanium and Titanium Alloys UNF 23.5 – Zirconium
High Alloy Steels Part UHA UHA 23 Cast Iron Part UCI UCI 23 Cast Ductile Iron Part UCD UCD 23
UNS Series Metal type(s)
A00001 to A99999 Aluminum and aluminum alloys
C00001 to C99999 Copper and copper alloys
F00001 to F99999 Cast irons G00001 to G99999 AISI and SAE carbon and alloy steels (except tool steels) J00001 to J99999 Cast steels (except tool steels) N00001 to N99999 Nickel and nickel alloys R00001 to R99999 Reactive and refractory metals and alloys
S00001 to S99999 Heat and corrosion resistant (stainless) steels
Following tables shows the list of materials that are the detailed list of materials.
CARBON AND LOW ALLOY STEEL
Spec. No. Type/Grade Spec. No. Type/Grade Spec. No. Type/Grade
SA-36 . . . SA-302 A, B, C, D SA-508 1, 1A, 2 Cl. 1, 3 Cl. 1, 3V, 4N Cl. 3, 22 Cl. 3 SA-53 E/A, E/B, S/A, S/B SA-307 B SA-515 60, 65, 70 SA-105 . . . SA-320 L7, L7A, L7M, L43 SA-516 55, 60, 65, 70 SA-106 A, B, C SA-325 1 SA-524 I, II SA-135 A, B SA-333 1, 3, 4, 6, 7, 9 SA-533 A Cl. 1 & 2, B Cl. 1 & 2, SA-178 A, C SA-334 1, 3, 6, 7, 9 C Cl. 1 & 2, D Cl. 2 SA-179 . . . SA-335 P1, P2, P5, P5b, P5c, SA-537 Cl.1, 2, & 3 P9, P11, P12, P15, SA-540 B21, B22, B23, B24, SA-181 . . . P21, P22, P91 B24V
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 110 of 279
CARBON AND LOW ALLOY STEEL
Spec. No. Type/Grade Spec. No. Type/Grade Spec. No. Type/Grade
SA-182 FR, F1, F2, F3V, F5, SA-336 F1, F3V, F5, F5A, F9,
F5a, F9, F11 Cl. 1 & F11 Cl. 2 & 3, F12, SA-541 1, 1A, 2 Cl. 1, 3 Cl. 1, 3V,
2, F12 Cl. 1 & 2, F21 Cl. 1 & 3, F22 Cl. 22 Cl. 3, 22V
F21, F22 Cl. 1 & 3, 1 & 3, F22V, F91, SA-542 B Cl. 4, C Cl. 4a, D Cl. 4a
F22V, F91 F304, F304H, F304L, F304N, F310, F316, SA-556 A2, B2, C2 SA-192 . . . F316H, F316L, SA-557 A2, B2, C2 SA-193 B5, B7, B7M, B16 F316N, F321, F321H, SA-199 T5, T9, T11, T21, T22 F347, F347H, F348, SA-562 . . . F348H, FXM-11, SA-202 A, B FXM-27Cb SA-574 . . . SA-203 A, B, D, E, F SA-204 A, B, C SA-350 LF1, LF2, LF3, LF5, LF9 SA-587 . . . SA-209 T1, T1a, T1b SA-210 A-1, C SA-352 LCB, LC1, LC2, LC3 SA-612 . . . SA-354 BC, BD SA-213 T2, T5, T5b, T5c, T9, SA-620 . . . T11, T12, T17, T21, SA-369 FP1, FP2, FP5, FP9, T22, T91 FP11, FP12, FP21, SA-662 A, B, C SA-214 . . . FP22 SA-216 WCA, WCB, WCC SA-675 45, 50, 55, 60, 65, 70 SA-217 C12, C5, WC1, WC4, SA-372 A, B, C, D, E Cl. 65 & 70, WC5, WC6, WC9 F Cl. 70, G Cl. 70, SA-695 B/35, B/40 H Cl. 70, J Cl. 65, 70, & SA-225 C 110, L, M Cl. A & B SA-727 . . . SA-226 . . . SA-387 2, 5, 11, 12, 21, 22, 91 SA-737 B, C SA-234 WPB, WPC, WPR, WP1, SA-738 A, B, C WP5, WP9, WP11 Cl. 1, SA-414 A, B, C, D, E, F, G SA-739 B11, B22 WP12 Cl. 1, WP22 Cl. 1 SA-420 WPL 3, WPL 6, WPL 9 SA-765 I, II, III SA-250 T1, T1a, T1b SA-423 1, 2 SA-812 65, 80 SA-266 1, 2, 3, 4 SA-437 B4B, B4C SA-832 21V, 22V SA-283 SA-285
A, B, C, D A, B, C SA-449 . . . SA-836 . . .
SA-455 . . . SA-299 . . . SA/CSA-
G40.21 38W
SA-487 1 Cl. A & B, 2 Cl. A & B, 4 Cl. A, 8 Cl. A
NONFERROUS METALS — ALUMINUM AND ALUMINUM ALLOY PRODUCTS Spec. No.
Alloy Design./UNS No. Spec. No.
Alloy Desig./UNS No.
SB-26 A02040, A03560, A24430 SB-221 A91060, A91100, A92024, A93003, A95083,
A95086, A95154, A95454, A95456, A96061, SB-108 A02040, A03560 A96063
SB-209 Alclad 3003, 3004, 6061; A91060, A91100, SB-234 Alclad 3003; A91060, A93003, A95052, A95454,
A93003, A93004, A95052, A95083, A95086, A96061
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 111 of 279
A95154, A95254, A95454, A95456, A95652, A96061 SB-241 Alclad 3003; A91060, A91100, A93003,
A95052, A95083, A95086, A95454,A95456, A96061, SB-210 Alclad 3003; A91060, A93003, A95052, A96063 A95154, A96061, A96063 SB-247 A92014, A93003, A95083, A96061 SB-211 A92014, A92024, A96061
SB-308 A96061
NONFERROUS METALS — COPPER AND COPPER ALLOYS
Spec. No. UNS No. Spec. No. UNS No.
SB-42 C10200, C12000, C12200 SB-171 C36500, C44300, C44400, C44500, C46400,
SB-43 C23000 C46500, C61400, C63000, C70600, C71500
SB-61 C92200 SB-187 C10200, C11000
SB-62 C83600 SB-271 C95200
SB-75 C10200, C12000, C12200, C14200 SB-283 C37700, C64200
SB-96 C65500 SB-315 C65500
SB-98 C65100, C65500, C66100 SB-359 C70600
SB-111 C10200,C12000, C12200, C14200, C19200, C23000, C28000, C44300, C44400, C44500, C60800, C68700, C70400, C70600, C71000,
SB-395 C10200, C12000, C12200, C14200, C19200, C23000, C44300, C44400, C44500, C60800, C68700, C70600, C71000, C71500
C71500, C72200 SB-466 C70600, C71000, C71500 SB-135 C23000 SB-467 C70600
SB-148 C95200, C95400 SB-543 C12200, C19400, C23000, C44300, C44400,
SB-150 C61400, C62300, C63000, C64200 C44500, C68700, C70400, C70600, C71500
SB-152 C10200, C10400, C10500, C10700, C11000, SB-584 C92200, C93700, C97600
C12200, C12300
SB-169 C61400
NONFERROUS METALS — NICKEL AND HIGH NICKEL ALLOYS Spec. No. UNS No. Spec. No.
UNS No.
SB-626 N06002, N06007, N06022, N06030,
N06059, SB-677 N08904, N08925
N06455, N06975, N06985, N08320,
N10001,
N10276, N10665, R30556 SB-688 N08366, N08367
SB-637 N07718, N07750 SB-690 N08366, N08367
SB-649 N08904, N08925 SB-691 N08366, N08367
SB-668 N08028 SB-704 N06625, N08825
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 112 of 279
SB-672 N08700 SB-705 N06625, N08825
SB-673 N08904, N08925 SB-709 N08028
SB-674 N08904, N08925 SB-710 N08330
SB-675 N08366, N08367 SB-729 N08020
SB-676 N08366, N08367 SB-804 N08367
NONFERROUS METALS — TITANIUM AND TITANIUM ALLOYS
Spec. No. UNS No.
Spec. No. UNS No.
SB-265 R50250, R50400, R50550, R52250, R52252, R52400,
SB-363 R50250, R50400, R50550, R52400, R53400
R52402, R53400, R56320 SB-367 R50400, R50550 SB-337 R50250, R50400, R50550, R52400, R53400,
R56320
SB-381 R50250, R50400, R50550, R52400, R52402, SB-338 R50250, R50400, R50550, R52400, R52402,
R53400, R53400
R56320
SB-348 R50250, R50400, R50550, R52400, R52402, R53400
NONFERROUS METALS — ZIRCONIUM
Spec. No. UNS No. Spec. No. UNS No.
SB-493 SB-523 SB-550
R60702, R60702, R60702,
R60705 R60705 R60705
SB-551 SB-658 R60702, R60705 R60702, R60705
HIGH ALLOY STEEL
Spec. No. UNS No. Type/Grade Spec. No. UNS
No. Type/Grade Spec. No.
UNS No. Type/Grade
SA-182 S20910 FXM-19 S34800 TP348 S44700 . . .
S21904 FXM-11 S34809 TP348H S44800 . . . S30400 F304 S38100 XM-15 S30403 F304L SA-249 S20910 TPXM-19 S30409 F304H SA-217 J91150 CA15 S24000 TPXM-29 S30815 F45 S30400 TP304
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 113 of 279
HIGH ALLOY STEEL
Spec. No. UNS No. Type/Grade Spec. No. UNS
No. Type/Grade Spec. No.
UNS No. Type/Grade
S31000 S31254 S31600 S31603 S31609 S31700 S31703 S31803 S32100 S32109 S34700 S34709 S34800 S34809 S41000 S44627
F310 F44 F316 F316L F316H F317 F317L F51 F321 F321H F347 F347H F348 F348H F6a Cl. 1 & 2 FXM-27Cb
SA-240 S20100 S20400 S20910 S24000 S30200 S30400 S30403 S30409 S30451 S30815 S30908 S30909 S30940 S31008 S31009 S31040
201-1, 201-2 204 XM-19 XM-29 302 304 304L 304H 304N . . . 309S 309H 309Cb 310S 310H 310Cb
S30403 S30409 S30451 S30815 S30908 S30909 S30940 S31008 S31009 S31040 S31050 S31254 S31600 S31603 S31609 S31651
TP304L TP304H TP304N . . . TP309S TP309H TP309Cb TP310S TP310H TP310Cb TP310MoLN . . . TP316 TP316L TP316H TP316N
S31050 310MoLN S31700 TP317 SA-193 S21800 B8S, B8SA S31200 . . . S31703 TP317L S30400 B8 Cl. 1 & 2 S31254 . . . S31725 . . . S30451 B8NA Cl. 1A S31260 . . . S32100 TP321 S30500 B8P Cl. 1 &
2 S31600 316 S32109 TP321H
S31600 B8M Cl.1& 2,
S31603 316L S34700 TP347
B8M2 Cl. 2 S31609 316H S34709 TP347H S31651 B8MNA Cl.
1A S31635 316Ti S34800 TP348
S32100 B8T Cl. 1 & 2
S31640 316Cb S34809 TP348H
S34700 B8C Cl. 1 & 2
S31651 316N S38100 TPXM-15
S41000 B6 S31700 317 S31703 317L SA-268 S40500 TP405 SA-213 S20910 XM-19 S31725 . . . S40800 . . . S30400 TP304 S31803 . . . S40900 TP409 S30403 TP304L S32100 321 S41000 TP410 S30409 TP304H S32304 . . . S42900 TP429 S30451 TP304N S32550 . . . S43000 TP430 S30815 . . . S32900 329 S43035 TP439 S30908 TP309S S32950 . . . S44400 . . . S30909 TP309H S34700 347 S44600 TP446-1, S30940 TP309Cb S34709 347H TP446-2 S31008 TP310S S34800 348 S44626 XM-33 S31009 TP310H S38100 XM-15 S44627 XM-27 S31040 TP310Cb S40500 405 S44635 . . . S31050 TP310MoLN S40900 409 S44660 26-3-3 S31600 TP316 S41000 410 S44700 29-4 S31603 TP316L S41008 410S S44735 . . . S31609 TP316H S42900 429 S44800 29-4-2 S31651 TP316N S43000 430 S31725 . . . S44000 . . . SA-312 S20910 TPXM-19 S32100 TP321 S44626 XM-33 S21904 TPXM-11
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 114 of 279
HIGH ALLOY STEEL
Spec. No. UNS No. Type/Grade Spec. No. UNS
No. Type/Grade Spec. No.
UNS No. Type/Grade
S32109 TP321H S44627 XM-27 S24000 TPXM-29 S34700 TP347 S44635 . . . S30400 TP304 S34709 TP347H S44660 26-3-3 S30403 TP304L
S30409 TP304H J92600 CF8, CF8A S31600 FP316
S30451 TP304N J92710 CF8C S31609 FP316H S30815 . . . J92800 CF3M S31651 FP316N S30908 TP309S J92900 CF8M S32100 FP321 S30909 TP309H J93000 CG8M S32109 FP321H S30940 TP309Cb J93254 CK3MCuN S34700 FP347 S31008 TP310S J93345 CE8MN S34709 FP347H S31009 TP310H J93400 CH8 S31040 TP310Cb J93402 CH20 SA-452 S30409 TP304H S31050 TP310MoLN J93790 CG6MMN S31609 TP316H S31254 . . . J94202 CK20 S34709 TP347H S31600 TP316 . . . CT15C S31603
S31609 S31651
TP316L TP316H TP316N SA-358
J94651 S31254
CN-3MN . . .
SA-453 S63198 S66286
651 Cl. A & B 660 Cl. A & B
S31700 S31703 S31725 S32100 S32109 S34700 S34709 S34800 S34809 S38100
TP317 TP317L . . . TP321 TP321H TP347 TP347H TP348 TP348H TPXM-15
SA-376 S31725 S30400 S30409 S30451 S31600 S31609 S31651 S31725 S32100
. . . TP304 TP304H TP304N TP316 TP316H TP316N . . . TP321
SA-479 S20910 S24000 S30200 S30400 S30403 S30409 S30815 S30908 S30909 S30940
XM-19 XM-29 302 304 304L 304H . . . 309S 309H 309Cb
SA-320 S30323 S30400 S31600 S32100 S34700
B8F Cl. 1, B8FA Cl. 1A B8 Cl. 1 & 2, B8A Cl. 1A B8M Cl.1& 2, B8MA Cl. 1A B8T Cl. 1 & 2 B8C Cl. 1 & 2, B8CA Cl. 1A
SA-403
S32109 S34700 S34709 S34800 S20910 S30400 S30403 S30409 S30451
TP321H TP347 TP347H TP348 XM-19 304 304L 304H 304N
S31008 S31009 S31040 S31600 S31603 S31725 S32100 S32550 S34700 S34800
310S 310H 310Cb 316 316L . . . 321 . . . 347 348
S30900 309 S40500 405 SA-336 S21904 FXM-11 S31000 310 S41000 410 S30400 F304 S31600 316 S43000 430 S30403 F304L S31603 316L S43035 439 S30409 F304H S31609 316H S44627 XM-27 S30451 F304N S31651 316N S44700 . . . S31000 F310 S31700 317 S44800 . . . S31600 F316 S31703 317L S31603
S31609 F316L F316H
S32100 S32109
321 321H
SA-564 S17400 630
S31651 S32100 S32109
F316N F321 F321H
S34700 S34709 S34800
347 347H 348
SA-666 S20100 S21904
201-1, 201-2 XM-11
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 115 of 279
HIGH ALLOY STEEL
Spec. No. UNS No. Type/Grade Spec. No. UNS
No. Type/Grade Spec. No.
UNS No. Type/Grade
S34700 S34709
F347 F347H
S34809 348H SA-688 S24000 TPXM-29
S34800 S34809
F348 F348H SA-409 S31725 . . . S30400 S30403
TP304 TP304L
S44627 FXM-27Cb SA-430 S30400 FP304 S30451 S31600
TP304N TP316
SA-351 J92500 J92590
CF3, CF3A CF10
S30409 S30451
FP304H FP304N
S31603 TP316L
SA-705 S17400 630 SA-731 S44626 TPXM-33 SA-790 S31260 . . . SA-813 S30908 TP309S
S44627 TPXM-27 S31500 . . . S30940 TP309Cb
S31803 . . . S31008 TP310S SA-747 J92180 CB7Cu-1 S32304 . . . S31040 TP310Cb S32550 . . . SA-789 S31260
S31500 S31803
. . .
. . .
. . .
S32750 S32900 S32950
. . .
. . .
. . .
SA-814 S30908 S30940 S31008
TP309S TP309Cb TP310S
S32304 . . . S31040 TP310Cb S32550 . . . SA-803 S43035 TP439 S32750 . . . S44660 26-3-3 SA-815 S31803 . . . S32900 . . . S32950 . . .
FERRITIC STEELS WITH PROPERTIES ENHANCED BY HEAT TREATMENT
Spec. No. Type/Grade Spec. No. Type/Grade
SA-333 8
SA-522 I
SA-334 8 SA-533 B Cl. 3,
SA-353 . . . SA-543 B, C
SA-420 WPL8 SA-553 I, II
SA-487 4 Cl. B & E, CA6NM SA-592 A, E, F
SA-508 4N Cls. 1, 2 SA-645 . . .
SA-517 A, B, E, F, J, P SA-724 A, B, C
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 116 of 279
30009001-Autoclave Reactor
30009002-Electro winning Cell
30009003-Inoculum Tank
30009004-Jacketed & Agitated Reactor
30009005-Jacketed, Non-Agitated Reactor
30009006-Mixer-Settler
30009007-Propeller mixer, Fixed
30009008-Propeller mixer, Portable
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 117 of 279
Database name Reactor Level of estimate Detailed
Database code 30009 Version 3.0.306
Standard API Date Feb. 2014
Alternative Materials for parts A 105 A 420 GR.WPL 6 API 5L GRADE C NITRL A 105 GALVANIZED A 516 GR.65 B 444 GR.N006625 SS304 A 106 A 516 GR.X70 B 564 GR. N06625 SS316 A 182 GR. F316L A 53 B366-WPNCMC (UNSN 06625) SS321
A 193 GR.B7 A 671 GR.CC 60 CLASS22 C 20 SS347
A 194 GR.2H A 694 F 53 HASTB SS410 A 20 A 694 F 65 HASTC SS6LC A 216 GR.WCB A 694 F60 HASTELLOY SS304L A 234 GR.WPB A 860 GR. WPHY 52 HYPLN SS316L A 283 GR.C A 860 GR. WPHY 65 I800 TFELS A 312 TP 316L A 860 GR.WPHY60 IN3LC TFESS A 320 GR. L7 A333A INCNL TI A 350 GR. LF2 CLASS 1 A333C INCOLOY ALLOY X42W A 350 GR. LF2 CLASS 1 A335B MONEL X46W A 351 GR. CF8M A335C MONEL ALLOY X52W A 352 GR. LCB A335D NEPNE X56W A 358 GR.316L CL.1 A335F NI200 X60W A 36 A335G NI201 X65W A 360 GR. LF2 CLASS 1 API 5L GRADE A NICKLE ZR A 403 GR.WP316L API 5L GRADE B NICKLE ALLOY
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 118 of 279
Corrosion resistance Yes No
Temperature °C
Min. 20 Max. 500 Step: 60
Volume, m^3 Min. 1
Max. 50 Step: 1
Internal Pressure, m^3 (Psi) Full Vacuum
Min. 25 Max. 900 Step: 75
Diameter mm Min. 100
Max. 6000 Step: 100
Height mm Min. 500
Max. 12000 Step: 200
Weather Proof
Yes No
SG f1 / SG f2 Min. 0.001
Max. 1 Step: 0.01
Liner Yes No
Connectors Yes No
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 119 of 279
30010-Blower
30010001-Axial Blower
30010002-Centrifugal Blower
30010003-Rotary Blower
30010004-Rotary,2 Rotor Blower
30010005-Rotary, Sliding Vane Blower
30010006-Rotary, Turbo Blower
30010007-Turbo Blower
30010008-Heavy Duty Blower
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 120 of 279
Database name Blower Level of estimate Detailed
Database code 30010 Version 3.0.306
Standard API Date Feb. 2014
Alternative Materials for parts A 105 A 420 GR.WPL 6 API 5L GRADE C NITRL A 105 GALVANIZED A 516 GR.65 B 444 GR.N006625 SS304 A 106 A 516 GR.X70 B 564 GR. N06625 SS316 A 182 GR. F316L A 53 B366-WPNCMC (UNSN 06625) SS321
A 193 GR.B7 A 671 GR.CC 60 CLASS22 C 20 SS347
A 194 GR.2H A 694 F 53 HASTB SS410 A 20 A 694 F 65 HASTC SS6LC A 216 GR.WCB A 694 F60 HASTELLOY SS304L A 234 GR.WPB A 860 GR. WPHY 52 HYPLN SS316L A 283 GR.C A 860 GR. WPHY 65 I800 TFELS A 312 TP 316L A 860 GR.WPHY60 IN3LC TFESS A 320 GR. L7 A333A INCNL TI A 350 GR. LF2 CLASS 1 A333C INCOLOY ALLOY X42W A 350 GR. LF2 CLASS 1 A335B MONEL X46W A 351 GR. CF8M A335C MONEL ALLOY X52W A 352 GR. LCB A335D NEPNE X56W A 358 GR.316L CL.1 A335F NI200 X60W A 36 A335G NI201 X65W A 360 GR. LF2 CLASS 1 API 5L GRADE A NICKLE ZR A 403 GR.WP316L API 5L GRADE B NICKLE ALLOY
Blower Capacity m^3/min
Min. 20 Max. 2000
Step: 50
Pressure, psi Vacuum Min. 20
Max. 150 Step: 10
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 121 of 279
30011-Fan
30011001-Vane-Axial Fan
30011002-Tube-Axial Fan
30011003-Centrifugal, Backward Curved Fan
30011004-Centrifugal, Radial, to 22 in H2O Fan
30011005-Centrifugal, Radial, to 32 in H2O Fan NoDoC notes:
1. Fan Mechanical parts Material are based on ASME section VIII, ASTM A 278, A 395, or A 536 2. Motor drives are based on API 541 or 546 as applicable, 3. The NoDoC User shall specify the type of motor and its characteristics and accessories, including the following:
a. Electrical characteristics. b. Starting conditions (including the expected voltage drop on starting). c. The type of enclosure. d. The sound pressure level. e. The area classification, based on API 500. f. The type of insulation. g. The required service factor. h. The ambient temperature and elevation above sea level. i. Transmission losses. j. Temperature detectors, vibration sensors, and heaters, if required. k. Auxiliaries (such as motor-generator sets, ventilation blowers, and instrumentation). l. Vibration acceptance criteria. m. Applicability of API 54 1 or IEEE 84 1.
4. Auxiliary systems are defined as piping systems that are in the following services: a. Group I:
1. Sealing fluid. 2. Buffer gas.
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 122 of 279
3. Fuel gas or oil. 4. Drains and vents. 5. Starting gas.
b. Group II: 1. Sealing steam. 2. Steam injection. 3. Water injection. 4. Starting air. 5. Instruments and control air. 6. Drains and vents.
c. Group III: 1. Cooling water. 2. Liquid wash. 3. Drains and vents.
d. Group IV: 1. Lubricating oil. 2. Control oil. 3. Drains and vents.
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 123 of 279
Database name Fans Level of estimate Detailed
Database code 30011 Version 3.0.306
Standard ASTM, AISI, ASME, or SAE, NACE Date Feb. 2014
Alternative Materials for parts A 105 A 420 GR.WPL 6 API 5L GRADE C NITRL A 105 GALVANIZED A 516 GR.65 B 444 GR.N006625 SS304 A 106 A 516 GR.X70 B 564 GR. N06625 SS316 A 182 GR. F316L A 53 B366-WPNCMC (UNSN 06625) SS321
A 193 GR.B7 A 671 GR.CC 60 CLASS22 C 20 SS347
A 194 GR.2H A 694 F 53 HASTB SS410 A 20 A 694 F 65 HASTC SS6LC A 216 GR.WCB A 694 F60 HASTELLOY SS304L A 234 GR.WPB A 860 GR. WPHY 52 HYPLN SS316L A 283 GR.C A 860 GR. WPHY 65 I800 TFELS A 312 TP 316L A 860 GR.WPHY60 IN3LC TFESS A 320 GR. L7 A333A INCNL TI A 350 GR. LF2 CLASS 1 A333C INCOLOY ALLOY X42W A 350 GR. LF2 CLASS 1 A335B MONEL X46W A 351 GR. CF8M A335C MONEL ALLOY X52W A 352 GR. LCB A335D NEPNE X56W A 358 GR.316L CL.1 A335F NI200 X60W A 36 A335G NI201 X65W A 360 GR. LF2 CLASS 1 API 5L GRADE A NICKLE ZR A 403 GR.WP316L API 5L GRADE B NICKLE ALLOY
Diameter (Inch) Min. 12 Max. 64 Step: 5
Rpm Min. 100
Max. 20000 Step. 500
HP Min. 50
Max. 1000 Step. 50
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 124 of 279
30012-Filter
Material Optional Material A 105 A 420 GR.WPL 6 API 5L GRADE C NITRL AL 304P
A 105 GALVANIZED A 516 GR.65 B 444 GR.N006625 SS304 BUTYL 304PG
A 106 A 516 GR.X70 B 564 GR. N06625 SS316 CB3LC 304PS
A 182 GR. F316L A 53 B366-WPNCMC (UNSN 06625) SS321 CB6LC 316LP
A 193 GR.B7 A 671 GR.CC 60 CLASS22 C 20 SS347 CMLCS 316P
A 194 GR.2H A 694 F 53 HASTB SS410 CPVC 316PG A 20 A 694 F 65 HASTC SS6LC CU 316PS A 216 GR.WCB A 694 F60 HASTELLOY SS304L EBONT 317LP A 234 GR.WPB A 860 GR. WPHY 52 HYPLN SS316L EPLCS 321P A 283 GR.C A 860 GR. WPHY 65 I800 TFELS FEP 6MOP A 312 TP 316L A 860 GR.WPHY60 IN3LC TFESS FRP A 320 GR. L7 A333A INCNL TI GRBW A 350 GR. LF2 CLASS 1 A333C INCOLOY ALLOY X42W GSLCS A 350 GR. LF2 CLASS 1 A335B MONEL X46W PPLCS A 351 GR. CF8M A335C MONEL ALLOY X52W PVC A 352 GR. LCB A335D NEPNE X56W PVDC
A 358 GR.316L CL.1 A335F NI200 X60W PVDF A 36 A335G NI201 X65W RBLCS A 360 GR. LF2
CLASS 1 API 5L GRADE A NICKLE ZR 2205P
A 403 GR.WP316L API 5L GRADE B NICKLE ALLOY 304LP
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 125 of 279
30012001-Belt Filter
Database name Belt Filter Level of estimate Detailed
Database code 30012001 Version 3.0.306
Standard API Date Feb 2014
Belt Filter Costing Parameters
Filter Area, m2 Min. 1
Max. 400 Step: 20
Pressure Atmospheric
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 126 of 279
30012002-Cartridge Filter
Database name Cartridge Filter Level of estimate Detailed
Database code 30012002 Version 3.0.306
Standard API Date Feb 2014
Cartridge Filter Costing Parameters
Filter Area, m2 Min. 18
Max. 400 Step: 20
Pressure Atmospheric
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 127 of 279
30012003-Disc Filter
Database name Disc Filter Level of estimate Detailed
Database code 30012003 Version 3.0.306
Standard API Date Feb 2014
Disc Filter Costing Parameters
Filter Area, m2 Min. 10
Max. 400 Step: 20
Pressure Atmospheric
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 128 of 279
30012004-Drum Filter
Database name Drum Filter Level of estimate Detailed
Database code 30012004 Version 3.0.306
Standard API Date Feb 2014
Drum Filter Costing Parameters
Filter Area, m2 Min. 10
Max. 400 Step: 20
Pressure Atmospheric
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 129 of 279
30012005-Gravity Filter
Database name Gravity Filter Level of estimate Detailed
Database code 30012005 Version 3.0.306
Standard API Date Feb 2014
Gravity Filter Costing Parameters
Filter Area, m2 Min. 1
Max. 400 Step: 20
Pressure Atmospheric
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 130 of 279
30012006-Leaf Filter
Database name Leaf Filter Level of estimate Detailed
Database code 30012006 Version 3.0.306
Standard API Date Feb 2014
Leaf Filter Costing Parameters
Filter Area, m2 Min. 2.5 Max. 400 Step: 20
Pressure Atmospheric
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 131 of 279
30012007-Pan Filter
Database name Pan Filter Level of estimate Detailed
Database code 30012007 Version 3.0.306
Standard API Date Feb 2014
Pan Filter Costing Parameters
Filter Area, m2 Min. 9
Max. 400 Step: 20
Pressure Atmospheric
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 132 of 279
30012008-Plate and Frame Filter
Database name Plate and Frame Filter Level of estimate Detailed
Database code 30012008 Version 3.0.306
Standard API Date Feb 2014
Plate and Frame Filter Costing Parameters
Filter Area, m2 Min. 12
Max. 400 Step: 20
Pressure Atmospheric
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 133 of 279
30012009-Table Filter
Database name Table Filter Level of estimate Detailed
Database code 30012009 Version 3.0.306
Standard API Date Feb 2014
Table Filter Costing Parameters
Filter Area, m2 Min. 0.8 Max. 400 Step: 20
Pressure Atmospheric
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 134 of 279
30012010-Tube Filter
Database name Tube Filter Level of estimate Detailed
Database code 30012010 Version 3.0.306
Standard API Date Feb 2014
Tube Filter Costing Parameters
Filter Area, m2 Min. 0.8 Max. 400 Step: 20
Pressure Atmospheric
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 135 of 279
30012011-Centrifugal filter, continuous solid bowl
Database name Centrifugal filter, continuous solid bowl Level of estimate Detailed
Database code 30012011 Version 3.0.306
Standard API Date Feb 2014
Centrifugal filter, continuous solid bowl Costing Parameters
Filter Area, m2 Min. 0.8 Max. 400 Step: 20
Pressure Atmospheric
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 136 of 279
30012012-Sand Filter
Database name Sand Filter Level of estimate Detailed
Database code 30012012 Version 3.0.306
Standard API Date Feb 2014
Sand Filter Costing Parameters
Filter Area, m2 Min. 0.8 Max. 400 Step: 20
Pressure Atmospheric
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 137 of 279
30012013-Charcoal Filter
Database name Charcoal Filter Level of estimate Detailed
Database code 30012013 Version 3.0.306
Standard API Date Feb 2014
Charcoal Filter Costing Parameters
Filter Area, m2 Min. 0.8 Max. 400 Step: 20
Pressure Atmospheric
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 138 of 279
30013-Dryer
Material Optional Material A 105 A 420 GR.WPL 6 API 5L GRADE C NITRL AL 304P A 105 GALVANIZED A 516 GR.65 B 444
GR.N006625 SS304 BUTYL 304PG
A 106 A 516 GR.X70 B 564 GR. N06625 SS316 CB3LC 304PS
A 182 GR. F316L A 53 B366-WPNCMC (UNSN 06625) SS321 CB6LC 316LP
A 193 GR.B7 A 671 GR.CC 60 CLASS22 C 20 SS347 CMLCS 316P
A 194 GR.2H A 694 F 53 HASTB SS410 CPVC 316PG A 20 A 694 F 65 HASTC SS6LC CU 316PS A 216 GR.WCB A 694 F60 HASTELLOY SS304L EBONT 317LP A 234 GR.WPB A 860 GR. WPHY 52 HYPLN SS316L EPLCS 321P A 283 GR.C A 860 GR. WPHY 65 I800 TFELS FEP 6MOP A 312 TP 316L A 860 GR.WPHY60 IN3LC TFESS FRP A 320 GR. L7 A333A INCNL TI GRBW A 350 GR. LF2 CLASS 1 A333C INCOLOY ALLOY X42W GSLCS A 350 GR. LF2 CLASS 1 A335B MONEL X46W PPLCS A 351 GR. CF8M A335C MONEL ALLOY X52W PVC A 352 GR. LCB A335D NEPNE X56W PVDC
A 358 GR.316L CL.1 A335F NI200 X60W PVDF
A 36 A335G NI201 X65W RBLCS A 360 GR. LF2
CLASS 1 API 5L GRADE A NICKLE ZR 2205P
A 403 GR.WP316L API 5L GRADE B NICKLE ALLOY 304LP
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 139 of 279
30013001-Agitated, Hollow-Flight Dryer
Database name Agitated, Hollow-Flight Dryer Level of estimate Detailed
Database code 30013001 Version 3.0.306
Standard ASME/API/ ANSI Date Feb 2014
Agitated, Hollow-Flight Dryer Costing Parameters
Number of Records: 45,030
Pressure, Bar 1
Surface Aria, Ft 2 Min. 10
Max. 200 Step: 2
Design Standard API
ASMI ANSI
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 140 of 279
30013002-Drum, Double, Atmospheric Dryer
Database name Drum, Double, Atmospheric Dryer Level of estimate Detailed
Database code 30013002 Version 3.0.306
Standard ASME/API/ ANSI Date Feb 2014
Drum, Double, Atmospheric Dryer Costing Parameters
Number of Records: 100,725
Pressure, Bar 1
Surface Aria, Ft 2 Min. 55
Max. 480 Step: 1
Design Standard API
ASMI ANSI
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 141 of 279
30013003-Drum, Double, Vacuum Dryer
Database name Drum, Double, Vacuum Dryer Level of estimate Detailed
Database code 30013003 Version 3.0.306
Standard ASME/API/ ANSI Date Feb 2014
Drum, Double, Vacuum Dryer Costing Parameters
Number of Records: 100,725
Pressure, Bar 1
Surface Aria, Ft 2 Min. 55
Max. 480 Step: 1
Design Standard API
ASMI ANSI
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 142 of 279
30013004-Drum, Roto-Louver w/ Fan Dryer
Database name Drum, Roto-Louver w/ Fan Dryer Level of estimate Detailed
Database code 30013004 Version 3.0.306
Standard ASME/API/ ANSI Date Feb 2014
Drum, Roto-Louver w/ Fan Dryer Costing Parameters
Number of Records: 237,000
Pressure, Bar 1
Surface Aria, Ft 2 Min. 50
Max. 1050 Step: 1
Design Standard API
ASMI ANSI
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 143 of 279
30013005-Drum, Single, Atmospheric Dryer
Database name Drum, Single, Atmospheric Dryer Level of estimate Detailed
Database code 30013005 Version 3.0.306
Standard ASME/API/ ANSI Date Feb 2014
Drum, Single, Atmospheric Dryer Costing Parameters
Number of Records: 45,030
Pressure, Bar 1
Surface Aria, Ft 2 Min. 10
Max. 200 Step: 1
Design Standard API
ASMI ANSI
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 144 of 279
30013006-Drum, Single, Vacuum Dryer
Database name Bleed Port Plug Valve Level of estimate Detailed
Database No. 30013006 Version 3.0.306
Standard ANSI Date Feb 2014
Drum, Single, Vacuum Dryer Costing Parameters
Number of Records: 35,550
Pressure, Bar 1
Surface Aria, Ft 2 Min. 10
Max. 160 Step: 1
Design Standard API
ASMI ANSI
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 145 of 279
30013007-Rotary, Direct Gas Fired Dryer
Database name Rotary, Direct Gas Fired Dryer Level of estimate Detailed
Database code 30013007 Version 3.0.306
Standard ASME/API/ ANSI Date Feb 2014
Rotary, Direct Gas Fired Dryer Costing Parameters
Number of Records: 353,130
Pressure, Bar 1
Surface Aria, Ft 2 Min. 200
Max. 30000 Step: 20
Design Standard API
ASMI ANSI
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 146 of 279
30013008-Rotary, Indirect Gas Fired Dryer
Database name Rotary, Indirect Gas Fired Dryer Level of estimate Detailed
Database code 30013008 Version 3.0.306
Standard ASME/API/ ANSI Date Feb 2014
Rotary, Indirect Gas Fired Dryer Costing Parameters
Number of Records: 309,285
Pressure, Bar 1
Surface Aria, Ft 2 Min. 95
Max. 1400 Step: 1
Design Standard API
ASMI ANSI
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 147 of 279
30013009-Rotary, Hot air Dryer
Database name Rotary, Hot air Dryer Level of estimate Detailed
Database code 30013009 Version 3.0.306
Standard ASME/API/ ANSI Date Feb 2014
Rotary, Hot air Dryer Costing Parameters
Number of Records: 309,285
Pressure, Bar 1
Surface Aria, Ft 2 Min. 95
Max. 1400 Step: 1
Design Standard API
ASMI ANSI
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 148 of 279
30013010-Rotary, Vacuum Dryer
Database name Rotary, Vacuum Dryer Level of estimate Detailed
Database code 30013010 Version 3.0.306
Standard ASME/API/ ANSI Date Feb 2014
Rotary, Vacuum Dryer Costing Parameters
Number of Records: 309,285
Pressure, Bar 1
Surface Aria, Ft 2 Min. 95
Max. 1400 Step: 1
Design Standard API
ASMI ANSI
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 149 of 279
30013011-Tray, Atmospheric Dryer
Database name Tray, Atmospheric Dryer Level of estimate Detailed
Database code 30013011 Version 3.0.306
Standard ASME/API/ ANSI Date Feb 2014
Tray-Atmospheric Dryer Costing Parameters
Number of Records: 42,660
Pressure, Bar 1
Surface Aria, Ft 2 Min. 20
Max. 200 Step: 1
Design Standard API
ASMI ANSI
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 150 of 279
30013012-Tray, Vacuum Dryer
Database name Tray, Vacuum Dryer Level of estimate Detailed
Database code 30013012 Version 3.0.306
Standard ASME/API/ ANSI Date Feb 2014
Tray, vacuum Dryer Costing Parameters
Pressure, Bar 1
Surface Aria, Ft 2 Min. 20
Max. 200 Step: 1
Design Standard API
ASMI ANSI
Number of Records: 42,660
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 151 of 279
30013013-Pan Dryer
Database name Pan Dryer Level of estimate Detailed
Database code 30013013 Version 3.0.306
Standard ASME/API/ ANSI Date Feb 2014
Pan Dryer Costing Parameters
Number of Records: 42,660
Pressure, Bar 1
Surface Aria, Ft 2 Min. 20
Max. 200 Step: 1
Design Standard API
ASMI ANSI
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 152 of 279
30013014-Vacuum Tumble Dryer
Database name Vacuum Tumble Dryer Level of estimate Detailed
Database code 30013014 Version 3.0.306
Standard ASME/API/ ANSI Date Feb 2014
Vacuum Tumble Dryer Costing Parameters
Pressure, Bar 1
Surface Aria, Ft 2 Min. 20
Max. 200 Step: 1
Design Standard API
ASMI ANSI
Number of Records: 42,660
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 153 of 279
30013015-Vacuum Shelf Dryer
Database name Vacuum Shelf Dryer Level of estimate Detailed
Database code 30013015 Version 3.0.306
Standard ASME/API/ ANSI Date Feb 2014
Vacuum Self Dryer Costing Parameters
Pressure, Bar 1
Surface Aria, Ft 2 Min. 20
Max. 200 Step: 1
Design Standard API
ASMI ANSI
Number of Records: 42,660
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 154 of 279
30013016-Dyna-Cone Vacuum Dryer
Database name Dyna-Cone Vacuum Dryer Level of estimate Detailed
Database code 30013016 Version 3.0.306
Standard ASME/API/ ANSI Date Feb 2014
Dyna-Cone Vacuum Dryer Costing Parameters
Pressure, Bar 1
Surface Aria, Ft 2 Min. 20
Max. 200 Step: 1
Design Standard API
ASMI ANSI
Number of Records: 42,660
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 155 of 279
30013017-Spray Dryer
Database name Spray Dryer Level of estimate Detailed
Database code 30013017 Version 3.0.306
Standard ASME/API/ ANSI Date Feb 2014
Spray Dryer Costing Parameters
Pressure, Bar 1
Surface Aria, Ft 2 Min. 20
Max. 200 Step: 1
Design Standard API
ASMI ANSI
Number of Records: 42,660
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 156 of 279
30014-Heater
Material Optional Material A 105 A 420 GR.WPL 6 API 5L GRADE C NITRL AL 304P
A 105 GALVANIZED A 516 GR.65 B 444 GR.N006625 SS304 BUTYL 304PG
A 106 A 516 GR.X70 B 564 GR. N06625 SS316 CB3LC 304PS
A 182 GR. F316L A 53 B366-WPNCMC (UNSN 06625) SS321 CB6LC 316LP
A 193 GR.B7 A 671 GR.CC 60 CLASS22 C 20 SS347 CMLCS 316P
A 194 GR.2H A 694 F 53 HASTB SS410 CPVC 316PG A 20 A 694 F 65 HASTC SS6LC CU 316PS A 216 GR.WCB A 694 F60 HASTELLOY SS304L EBONT 317LP A 234 GR.WPB A 860 GR. WPHY 52 HYPLN SS316L EPLCS 321P A 283 GR.C A 860 GR. WPHY 65 I800 TFELS FEP 6MOP A 312 TP 316L A 860 GR.WPHY60 IN3LC TFESS FRP A 320 GR. L7 A333A INCNL TI GRBW A 350 GR. LF2 CLASS 1 A333C INCOLOY ALLOY X42W GSLCS A 350 GR. LF2 CLASS 1 A335B MONEL X46W PPLCS A 351 GR. CF8M A335C MONEL ALLOY X52W PVC A 352 GR. LCB A335D NEPNE X56W PVDC
A 358 GR.316L CL.1 A335F NI200 X60W PVDF A 36 A335G NI201 X65W RBLCS A 360 GR. LF2
CLASS 1 API 5L GRADE A NICKLE ZR 2205P
A 403 GR.WP316L API 5L GRADE B NICKLE ALLOY 304LP
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 157 of 279
30014001-Box Fired Heater
Database name Box Fired Heater Level of estimate Detailed
Database code 30014001 Version 3.0.306
Standard ASME Date Feb 2014
Box Fired Heater Costing Parameters
Number of Records: 283,689
Duty, MBTU/Hr Min. 20
Max. 650 Step: 10
Pressure(Psi) Min. 150
Max. 3000 Step: 50
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 158 of 279
30014002-Cylindrical Fired Heater
Database name Cylindrical Fired Heater Level of estimate Detailed
Database code 30014002 Version 3.0.306
Standard ASME Date Feb 2014
Cylindrical Fired Heater Costing Parameters
Number of Records: 288,192
Duty, MBTU/Hr Min. 2
Max. 650 Step: 10
Pressure(Psi) Min. 150
Max. 3000 Step: 50
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 159 of 279
30014003-Dowtherm Fired Heater
Database name Dowtherm Fired Heater Level of estimate Detailed
Database code 30014003 Version 3.0.306
Standard ASME Date Feb 2014
Dowtherm Fired Heater Costing Parameter
Number of Records: 288,192
Duty, MBTU/Hr Min. 2
Max. 650 Step: 10
Pressure(Psi) Min. 150
Max. 3000 Step: 50
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 160 of 279
30014004-Portable Fired Heater
Database name Portable Fired Heater Level of estimate Detailed
Database code 30014004 Version 3.0.306
Standard ASME Date Feb 2014
Portable Fired Heater Costing Parameters
Number of Records: 288,192
Duty, MBTU/Hr Min. 1
Max. 650 Step: 10
Pressure(Psi) Min. 150
Max. 3000 Step: 50
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 161 of 279
30014005-Solution Heater
Database name Solution Heater Level of estimate Detailed
Database code 30014005 Version 3.0.306
Standard ASME Date Feb 2014
Solution Heater Costing Parameters
Number of Records: 288,192
Duty, MBTU/Hr Min. 1
Max. 650 Step: 10
Pressure(Psi) Min. 150
Max. 3000 Step: 50
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 162 of 279
30014006-Coiled Heater
Database name Coiled Heater Level of estimate Detailed
Database code 30014006 Version 3.0.306
Standard API 560 Date Feb 2014
Coiled Heater Costing Parameters
Number of Records: 581,440
Design Standards API 560 TEMA R TEMA C
ASME Section VIII, Div. 1 Canadian Standards
NACE MR0175 UBC Building Codes
ATEX CE
PED
Area Min 19 m^2
Max. 14000 m^2 Step: 300
Internal Pressure Full Vacuum Min. 100 psi Max. 900 psi
step: 50
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 163 of 279
30014007-Bayonet Heater
Database name Bayonet Heater Level of estimate Detailed
Database code 30014007 Version 3.0.306
Standard API 560 Date Feb 2014
Bayonet Heater Costing Parameters
Number of Records: 581,440
Design Standards API 560 TEMA R TEMA C
ASME Section VIII, Div. 1 Canadian Standards
NACE MR0175 UBC Building Codes
ATEX CE
PED
Area Min 2 m^2
Max. 14000 m^2 Step: 300
Internal Pressure Full Vacuum Min. 100 psi Max. 900 psi
step: 50
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 164 of 279
30014008-Electric Immersion Heater
Database name Electric Immersion Heater Level of estimate Detailed
Database code 30014008 Version 3.0.306
Standard API 560 Date Feb 2014
Electric Immersion Heater Costing Parameters
Number of Records: 581,440
Design Standards API 560 TEMA R TEMA C
ASME Section VIII, Div. 1 Canadian Standards
NACE MR0175 UBC Building Codes
ATEX CE
PED
Area Min 2 m^2
Max. 14000 m^2 Step: 300
Internal Pressure Full Vacuum Min. 100 psi Max. 900 psi
step: 50
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 165 of 279
30014009-Direct Fire Heater
Database name Direct Fire Heater, cylindrical type with vertical tubes Level of estimate Detailed
Database code 30014009 Version 3.0.306
Standard API 560 Date Feb 2014
Direct Fire Heater Costing Parameters
Number of Records: 581,440
Design Standards API 560 TEMA R TEMA C
ASME Section VIII, Div. 1 Canadian Standards
NACE MR0175 UBC Building Codes
ATEX CE
PED
Area Min 2 m^2
Max. 14000 m^2 Step: 300
Internal Pressure Full Vacuum Min. 100 psi Max. 900 psi
step: 50
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 166 of 279
30015-Gas Scrubber
Material Optional Material A 105 A 420 GR.WPL 6 API 5L GRADE C NITRL AL 304P
A 105 GALVANIZED A 516 GR.65 B 444 GR.N006625 SS304 BUTYL 304PG
A 106 A 516 GR.X70 B 564 GR. N06625 SS316 CB3LC 304PS
A 182 GR. F316L A 53 B366-WPNCMC (UNSN 06625) SS321 CB6LC 316LP
A 193 GR.B7 A 671 GR.CC 60 CLASS22 C 20 SS347 CMLCS 316P
A 194 GR.2H A 694 F 53 HASTB SS410 CPVC 316PG A 20 A 694 F 65 HASTC SS6LC CU 316PS A 216 GR.WCB A 694 F60 HASTELLOY SS304L EBONT 317LP A 234 GR.WPB A 860 GR. WPHY 52 HYPLN SS316L EPLCS 321P A 283 GR.C A 860 GR. WPHY 65 I800 TFELS FEP 6MOP A 312 TP 316L A 860 GR.WPHY60 IN3LC TFESS FRP A 320 GR. L7 A333A INCNL TI GRBW A 350 GR. LF2 CLASS 1 A333C INCOLOY ALLOY X42W GSLCS A 350 GR. LF2 CLASS 1 A335B MONEL X46W PPLCS A 351 GR. CF8M A335C MONEL ALLOY X52W PVC A 352 GR. LCB A335D NEPNE X56W PVDC
A 358 GR.316L CL.1 A335F NI200 X60W PVDF A 36 A335G NI201 X65W RBLCS A 360 GR. LF2
CLASS 1 API 5L GRADE A NICKLE ZR 2205P
A 403 GR.WP316L API 5L GRADE B NICKLE ALLOY 304LP
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 167 of 279
30015001-Impingement
Database name Impingement Level of estimate Detailed
Database code 30015001 Version 3.0.306
Standard ASME/API/ ANSI Date Feb 2014
Impingement Costing Parameters
Number of Records: 120,238
Pressure
Atmospheric
Flow Rate,CFM Min. 885
Max.77000 Step: 50
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 168 of 279
30015002-Venturi Scrubber
Database name Venturi Scrubber Level of estimate Detailed
Database code 30015002 Version 3.0.306
Standard ASME/API/ ANSI Date Feb 2014
Venturi Scrubber Costing Parameters
Number of Records: 107,440
Pressure
Atmospheric
Flow Rate,CFM Min. 32000 Max.100000
Step: 50
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 169 of 279
30015003-Wet Centrifugal Scrubber
Database name Wet Centrifugal Scrubber Level of estimate Detailed
Database code 30015003 Version 3.0.306
Standard ASME/API/ ANSI Date Feb 2014
Wet Centrifugal Scrubber Costing Parameters
Number of Records: 15,800
Pressure
Atmospheric
Flow Rate,CFM Min. 2000 Max.12000
Step: 50
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 170 of 279
30015004-Wet Dynamic Scrubber
Database name Wet Dynamic Scrubber Level of estimate Detailed
Database code 30015004 Version 3.0.306
Standard ASME/API/ ANSI Date Feb 2014
Wet Dynamic Scrubber Costing Parameters
Number of Records: 15,800
Pressure
Atmospheric
Flow Rate,CFM Min. 2000 Max.12000
Step: 50
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 171 of 279
30016-Size Reduction
30016001-Ball Mill
30016002-Vibrating Ball Mill
30016003-Ball Mill Dry Grinding, Closed circuit
with air classifiers
30016004-Ball Mill Dry Grinding, Open Circuit
30016005-Ball Mill Wet Grinding, Closed circuit
with air classifiers
30016006-Ball Mill Wet Grinding, Open circuit
30016007-AG/SAG Mill Dry Grinding, Closed circuit
with air classifiers
30016008-AG/SAG Mill Dry Grinding, Open circuit
30016009-AG/SAG Mill Wet Grinding, Closed circuit
with air classifiers
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 172 of 279
30016010-AG/SAG Mill Wet Grinding, Open circuit
30016011-Cage Mill
30016012-Cone Crusher
30016013-Gyratory Crusher
30016014-Jaw Crusher
30016015-Roll Crusher
30016016-Pebble Mill
30016017-Rod Mill
30016018-Pulverizer
30016019-Rolling Grinder
30016020-Rotary Cutter
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 173 of 279
Database name Size Reduction Level of estimate Detailed
Database code 30016 Version 3.0.306
Standard API Date Feb 2014
Material Optional Material A 105 A 420 GR.WPL 6 API 5L GRADE C NITRL AL 304P
A 105 GALVANIZED A 516 GR.65 B 444 GR.N006625 SS304 BUTYL 304PG
A 106 A 516 GR.X70 B 564 GR. N06625 SS316 CB3LC 304PS
A 182 GR. F316L A 53 B366-WPNCMC (UNSN 06625) SS321 CB6LC 316LP
A 193 GR.B7 A 671 GR.CC 60 CLASS22 C 20 SS347 CMLCS 316P
A 194 GR.2H A 694 F 53 HASTB SS410 CPVC 316PG A 20 A 694 F 65 HASTC SS6LC CU 316PS A 216 GR.WCB A 694 F60 HASTELLOY SS304L EBONT 317LP A 234 GR.WPB A 860 GR. WPHY 52 HYPLN SS316L EPLCS 321P A 283 GR.C A 860 GR. WPHY 65 I800 TFELS FEP 6MOP A 312 TP 316L A 860 GR.WPHY60 IN3LC TFESS FRP A 320 GR. L7 A333A INCNL TI GRBW A 350 GR. LF2 CLASS 1 A333C INCOLOY ALLOY X42W GSLCS A 350 GR. LF2 CLASS 1 A335B MONEL X46W PPLCS A 351 GR. CF8M A335C MONEL ALLOY X52W PVC A 352 GR. LCB A335D NEPNE X56W PVDC
A 358 GR.316L CL.1 A335F NI200 X60W PVDF A 36 A335G NI201 X65W RBLCS A 360 GR. LF2
CLASS 1 API 5L GRADE A NICKLE ZR 2205P
A 403 GR.WP316L API 5L GRADE B NICKLE ALLOY 304LP
Diameter (m) Min. 1 Max. 7
Step: 0.5
Pressure Atmospheric
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 174 of 279
30017-Dust Collector
Material Optional Material A 105 A 420 GR.WPL 6 API 5L GRADE C NITRL AL 304P
A 105 GALVANIZED A 516 GR.65 B 444 GR.N006625 SS304 BUTYL 304PG
A 106 A 516 GR.X70 B 564 GR. N06625 SS316 CB3LC 304PS
A 182 GR. F316L A 53 B366-WPNCMC (UNSN 06625) SS321 CB6LC 316LP
A 193 GR.B7 A 671 GR.CC 60 CLASS22 C 20 SS347 CMLCS 316P
A 194 GR.2H A 694 F 53 HASTB SS410 CPVC 316PG A 20 A 694 F 65 HASTC SS6LC CU 316PS A 216 GR.WCB A 694 F60 HASTELLOY SS304L EBONT 317LP A 234 GR.WPB A 860 GR. WPHY 52 HYPLN SS316L EPLCS 321P A 283 GR.C A 860 GR. WPHY 65 I800 TFELS FEP 6MOP A 312 TP 316L A 860 GR.WPHY60 IN3LC TFESS FRP A 320 GR. L7 A333A INCNL TI GRBW A 350 GR. LF2 CLASS 1 A333C INCOLOY ALLOY X42W GSLCS A 350 GR. LF2 CLASS 1 A335B MONEL X46W PPLCS A 351 GR. CF8M A335C MONEL ALLOY X52W PVC A 352 GR. LCB A335D NEPNE X56W PVDC
A 358 GR.316L CL.1 A335F NI200 X60W PVDF A 36 A335G NI201 X65W RBLCS A 360 GR. LF2
CLASS 1 API 5L GRADE A NICKLE ZR 2205P
A 403 GR.WP316L API 5L GRADE B NICKLE ALLOY 304LP
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 175 of 279
30017001-Bag House
Database name Bag House Level of estimate Detailed
Database code 30017001 Version 3.0.306
Standard API Date Feb 2014
Bag House Costing Parameters
Number of Records: 15,721
Gas Flow, m^3/min Min. 5
Max. 20000 Step: 100
Pressure Atmospheric
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 176 of 279
30017002-Centrifugal Scrubber
Database name Centrifugal Scrubber Level of estimate Detailed
Database code 30017002 Version 3.0.306
Standard API Date Feb 2014
Centrifugal Scrubber Costing Parameters
Number of Records: 3,318
Gas Flow, m^3/min Min. 8
Max. 850 Step: 20
Pressure Atmospheric
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 177 of 279
30017003-Cyclone
Database name Cyclone Level of estimate Detailed
Database code 30017003 Version 3.0.306
Standard API Date Feb 2014
Cyclone Costing Parameters
Number of Records: 4,661
Gas Flow, m^3/min Min. 7
Max. 3000 Step: 50
Pressure Atmospheric
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 178 of 279
30017004-Electrostatic Precipitator
Database name Electrostatic Precipitator Level of estimate Detailed
Database code 30017004 Version 3.0.306
Standard API Date Feb 2014
Electrostatic Precipitator Costing Parameters
Number of Records: 26,860
Gas Flow, m^3/min Min. 2000
Max. 19000 Step: 50
Pressure Atmospheric
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 179 of 279
30017005-Gravity Spray Scrubber
Database name Bag House Level of estimate Detailed
Database code 30017005 Version 3.0.306
Standard API Date Feb 2014
Gravity Spray Scrubber Costing Parameters
Number of Records: 18,091
Gas Flow, m^3/min Min. 42
Max. 11500 Step: 50
Pressure Atmospheric
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 180 of 279
30017006-Impingement Scrubber, Wet
Database name Impingement Scrubber, Wet Level of estimate Detailed
Database code 30017006 Version 3.0.306
Standard API Date Feb 2014
Impingement Scrubber, Wet Costing Parameters
Number of Records: 6,083
Gas Flow, m^3/min Min. 45
Max. 1600 Step: 20
Pressure Atmospheric
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 181 of 279
30017007-Scrubber, Wet
Database name Scrubber, Wet Level of estimate Detailed
Database code 30017007 Version 3.0.306
Standard API Date Feb 2014
Scrubber, Wet Costing Parameters
Number of Records: 5,451
Gas Flow, m^3/min Min. 14
Max. 1400 Step: 20
Pressure Atmospheric
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 182 of 279
30017008-Venturi
Database name Venturi Level of estimate Detailed
Database code 30017008 Version 3.0.306
Standard API Date Feb 2014
Venturi Costing Parameters
Number of Records: 9,243
Gas Flow, m^3/min Min. 150
Max. 2500 Step: 20
Pressure Atmospheric
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 183 of 279
30017009-Wet Dynamic Scrubber
Database name Wet Dynamic Scrubber Level of estimate Detailed
Database code 30017009 Version 3.0.306
Standard API Date Feb 2014
Wet Dynamic Scrubber Costing Parameters
Number of Records: 4,977
Gas Flow, m^3/min Min. 35
Max. 1300 Step: 20
Pressure Atmospheric
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 184 of 279
30017010-Louver Collector
Database name Louver Collector Level of estimate Detailed
Database code 30017010 Version 3.0.306
Standard API Date Feb 2014
Louver Collector Costing Parameters
Number of Records: 29,625
Gas Flow, m^3/min Min. 1250
Max. 20000 Step: 50
Pressure Atmospheric
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 185 of 279
30017011-Multiple Cyclone
Database name Multiple Cyclone Level of estimate Detailed
Database code 30017011 Version 3.0.306
Standard API Date Feb 2014
Multiple Cyclone Costing Parameters
Number of Records: 29,625
Gas Flow, m^3/min Min. 1250
Max. 20000 Step: 50
Pressure Atmospheric
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 186 of 279
30017012-Fabric Filter Dust Collector
Database name Fabric Filter Dust Collector Level of estimate Detailed
Database code 30017012 Version 3.0.306
Standard API Date Feb 2014
Fabric Filter Dust Collector Costing Parameters
Number of Records: 29,625
Gas Flow, m^3/min Min. 1250
Max. 20000 Step: 50
Pressure Atmospheric
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 187 of 279
30017013-Submerged nozzle scrubber
Database name Submerged nozzle scrubber Level of estimate Detailed
Database code 30017013 Version 3.0.306
Standard API Date Feb 2014
Submerged nozzle scrubber Costing Parameters
Number of Records: 29,625
Gas Flow, m^3/min Min. 1250
Max. 20000 Step: 50
Pressure Atmospheric
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 188 of 279
30018-Bin
Material Optional Material A 105 A 420 GR.WPL 6 API 5L GRADE C NITRL AL 304P
A 105 GALVANIZED A 516 GR.65 B 444 GR.N006625 SS304 BUTYL 304PG
A 106 A 516 GR.X70 B 564 GR. N06625 SS316 CB3LC 304PS
A 182 GR. F316L A 53 B366-WPNCMC (UNSN 06625) SS321 CB6LC 316LP
A 193 GR.B7 A 671 GR.CC 60 CLASS22 C 20 SS347 CMLCS 316P
A 194 GR.2H A 694 F 53 HASTB SS410 CPVC 316PG A 20 A 694 F 65 HASTC SS6LC CU 316PS A 216 GR.WCB A 694 F60 HASTELLOY SS304L EBONT 317LP A 234 GR.WPB A 860 GR. WPHY 52 HYPLN SS316L EPLCS 321P A 283 GR.C A 860 GR. WPHY 65 I800 TFELS FEP 6MOP A 312 TP 316L A 860 GR.WPHY60 IN3LC TFESS FRP A 320 GR. L7 A333A INCNL TI GRBW A 350 GR. LF2 CLASS 1 A333C INCOLOY ALLOY X42W GSLCS A 350 GR. LF2 CLASS 1 A335B MONEL X46W PPLCS A 351 GR. CF8M A335C MONEL ALLOY X52W PVC A 352 GR. LCB A335D NEPNE X56W PVDC
A 358 GR.316L CL.1 A335F NI200 X60W PVDF A 36 A335G NI201 X65W RBLCS A 360 GR. LF2
CLASS 1 API 5L GRADE A NICKLE ZR 2205P
A 403 GR.WP316L API 5L GRADE B NICKLE ALLOY 304LP
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 189 of 279
30018001-Cone Bottom Bin
Database name Cone Bottom Bin Level of estimate Detailed
Database code 30018001 Version 3.0.306
Standard API Date Feb 2014
Cone Bottom Bin Costing Parameters
Number of Records: 1,501
Volume, m^3 Min. 20
Max. 1000 Step: 50
Pressure Atmospheric
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 190 of 279
30018002- Hopper with Bottom, Bolter
Database name Hopper with Bottom, Bolter Level of estimate Detailed
Database code 30018002 Version 3.0.306
Standard API Date Feb 2014
Hopper with Bottom,Bolter Costing Parameters
Number of Records: 1,501
Volume, m^3 Min. 33
Max. 1000 Step: 50
Pressure Atmospheric
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 191 of 279
30019-Material Handling Equipment
Material Optional Material A 105 A 420 GR.WPL 6 API 5L GRADE C NITRL AL 304P
A 105 GALVANIZED A 516 GR.65 B 444 GR.N006625 SS304 BUTYL 304PG
A 106 A 516 GR.X70 B 564 GR. N06625 SS316 CB3LC 304PS
A 182 GR. F316L A 53 B366-WPNCMC (UNSN 06625) SS321 CB6LC 316LP
A 193 GR.B7 A 671 GR.CC 60 CLASS22 C 20 SS347 CMLCS 316P
A 194 GR.2H A 694 F 53 HASTB SS410 CPVC 316PG A 20 A 694 F 65 HASTC SS6LC CU 316PS A 216 GR.WCB A 694 F60 HASTELLOY SS304L EBONT 317LP A 234 GR.WPB A 860 GR. WPHY 52 HYPLN SS316L EPLCS 321P A 283 GR.C A 860 GR. WPHY 65 I800 TFELS FEP 6MOP A 312 TP 316L A 860 GR.WPHY60 IN3LC TFESS FRP A 320 GR. L7 A333A INCNL TI GRBW A 350 GR. LF2 CLASS 1 A333C INCOLOY ALLOY X42W GSLCS A 350 GR. LF2 CLASS 1 A335B MONEL X46W PPLCS A 351 GR. CF8M A335C MONEL ALLOY X52W PVC A 352 GR. LCB A335D NEPNE X56W PVDC
A 358 GR.316L CL.1 A335F NI200 X60W PVDF A 36 A335G NI201 X65W RBLCS A 360 GR. LF2
CLASS 1 API 5L GRADE A NICKLE ZR 2205P
A 403 GR.WP316L API 5L GRADE B NICKLE ALLOY 304LP
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 192 of 279
30019001-Bin Activator, Vibrating
Database name Bin Activator, Vibrating Level of estimate Detailed
Database code 30019001 Version 3.0.306
Standard API Date Feb 2014
Bin Activator, Vibrating Costing Parameters
Number of Records: 3,634
Diameter (m) Min. 0.7 Max. 10 Step: 0.2
Pressure Atmospheric
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 193 of 279
30019002-Feeder, Rotary Table
Database name Feeder, Rotary Table Level of estimate Detailed
Database code 30019002 Version 3.0.306
Standard API Date Feb 2014
Feeder, Rotary Table Costing Parameters
Number of Records: 3,634
Diameter (m) Min. 0.7 Max. 10 Step: 0.2
Pressure Atmospheric
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 194 of 279
30019003-Rail Car Dumper
Database name Rail Car Dumper Level of estimate Detailed
Database code 30019003 Version 3.0.306
Standard API Date Feb 2014
Rail Car Dumper Costing Parameters
Number of Records: 3,634
Diameter (m) Min. 0.7 Max. 10 Step: 0.2
Pressure Atmospheric
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 195 of 279
30019004-Rotary Air Lock
Database name Rotary Air Lock Level of estimate Detailed
Database code 30019004 Version 3.0.306
Standard API Date Feb 2014
Rotary Air Lock Costing Parameters
Number of Records: 3,871
Diameter (m) Min. 0.2 Max. 10 Step: 0.2
Pressure Atmospheric
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 196 of 279
0019005-Slide Gate
Database name Slide Gate Level of estimate Detailed
Database code 30019005 Version 3.0.306
Standard API Date Feb 2014
Slide Gate Costing Parameters
Number of Records: 3,871
Diameter (m) Min. 0.1 Max. 10 Step: 0.2
Pressure Atmospheric
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 197 of 279
30019006-Chutes
Database name Chutes Level of estimate Detailed
Database code 30019006 Version 3.0.306
Standard API Date Feb 2014
Chutes Costing Parameters
Number of Records: 3,871
Diameter (m) Min. 0.1 Max. 10 Step: 0.2
Pressure Atmospheric
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 198 of 279
30020-Blender
Material Optional Material A 105 A 420 GR.WPL 6 API 5L GRADE C NITRL AL 304P
A 105 GALVANIZED A 516 GR.65 B 444 GR.N006625 SS304 BUTYL 304PG
A 106 A 516 GR.X70 B 564 GR. N06625 SS316 CB3LC 304PS
A 182 GR. F316L A 53 B366-WPNCMC (UNSN 06625) SS321 CB6LC 316LP
A 193 GR.B7 A 671 GR.CC 60 CLASS22 C 20 SS347 CMLCS 316P
A 194 GR.2H A 694 F 53 HASTB SS410 CPVC 316PG A 20 A 694 F 65 HASTC SS6LC CU 316PS A 216 GR.WCB A 694 F60 HASTELLOY SS304L EBONT 317LP A 234 GR.WPB A 860 GR. WPHY 52 HYPLN SS316L EPLCS 321P A 283 GR.C A 860 GR. WPHY 65 I800 TFELS FEP 6MOP A 312 TP 316L A 860 GR.WPHY60 IN3LC TFESS FRP A 320 GR. L7 A333A INCNL TI GRBW A 350 GR. LF2 CLASS 1 A333C INCOLOY ALLOY X42W GSLCS A 350 GR. LF2 CLASS 1 A335B MONEL X46W PPLCS A 351 GR. CF8M A335C MONEL ALLOY X52W PVC A 352 GR. LCB A335D NEPNE X56W PVDC
A 358 GR.316L CL.1 A335F NI200 X60W PVDF A 36 A335G NI201 X65W RBLCS A 360 GR. LF2
CLASS 1 API 5L GRADE A NICKLE ZR 2205P
A 403 GR.WP316L API 5L GRADE B NICKLE ALLOY 304LP
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 199 of 279
30020001-Kneader, Stationary, Double Arm Blender
Database name Kneader, Stationary, Double Arm Blender Level of estimate Detailed
Database code 30020001 Version 3.0.306
Standard API Date Feb 2014
Kneader, Stationary, Double Arm Blender Costing Parameters
Number of Records: 3,081
Volume,M^2 Min. 0.03 Max. 20 Step: 0.5
Pressure Atmospheric
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 200 of 279
30020002-Kneader, Tilting, Double Arm Blender
Database name Kneader, Tilting, Double Arm Blender Level of estimate Detailed
Database code 30020002 Version 3.0.306
Standard API Date Feb 2014
Kneader, Tilting, Double Arm Blender Costing Parameters
Number of Records: 3,081
Volume,M^2 Min. 0.05 Max. 20 Step: 0.5
Pressure Atmospheric
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 201 of 279
30020003-Kneader, Tilting, Vacuum, Double Arm Blender
Database name Kneader, Tilting, Vacuum, Double Arm Blender Level of estimate Detailed
Database code 30020003 Version 3.0.306
Standard API Date Feb 2014
Kneader, Tilting, Vacuum, Double Arm Blender Costing Parameters
Number of Records: 3,081
Volume,M^2 Min. 0.03 Max. 20 Step: 0.5
Pressure Atmospheric
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 202 of 279
30020004-Ribbon Blender
Database name Ribbon Blender Level of estimate Detailed
Database code 30020004 Version 3.0.306
Standard API Date Feb 2014
Ribbon Blender Costing Parameters
Number of Records: 3,002
Volume,M^2 Min. 0.7 Max. 20 Step: 0.5
Pressure Atmospheric
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 203 of 279
30020005-Spiral Ribbon Blender
Database name Spiral Ribbon Blender Level of estimate Detailed
Database code 30020005 Version 3.0.306
Standard API Date Feb 2014
Spiral Ribbon Blender Costing Parameters
Number of Records: 3,002
Volume,M^2 Min. 0.7 Max. 20 Step: 0.5
Pressure Atmospheric
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 204 of 279
30020006-Rotary, Double Cone Blender
Database name Rotary, Double Cone Blender Level of estimate Detailed
Database code 30020006 Version 3.0.306
Standard API Date Feb 2014
Rotary, Double Cone Blender Costing Parameters
Number of Records: 2,923
Volume,M^2 Min. 1.4 Max. 20 Step: 0.5
Pressure Atmospheric
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 205 of 279
30020007-Rotary, Twin Shell Blender
Database name Rotary, Twin Shell Blender Level of estimate Detailed
Database code 30020007 Version 3.0.306
Standard API Date Feb 2014
Rotary, Twin Shell Blender Costing Parameters
Number of Records: 3,002
Volume,M^2 Min. 1
Max. 20 Step: 0.5
Pressure Atmospheric
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 206 of 279
30020008-Sigma, Double Arm Blender
Database name Sigma, Double Arm Blender Level of estimate Detailed
Database code 30020008 Version 3.0.306
Standard API Date Feb 2014
Sigma, Double Arm Blender Costing Parameters
Number of Records: 3,081
Volume,M^2 Min. 0.5 Max. 20 Step: 0.5
Pressure Atmospheric
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 207 of 279
30020009-Two Roll Blender
Database name Two Roll Blender Level of estimate Detailed
Database code 30020009 Version 3.0.306
Standard API Date Feb 2014
Two Roll Blender Costing Parameters
Number of Records: 3,081
Volume,M^2 Min. 0.5 Max. 20 Step: 0.5
Pressure Atmospheric
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 208 of 279
30020010-Muller Blender
Database name Muller Blender Level of estimate Detailed
Database code 30020010 Version 3.0.306
Standard API Date Feb 2014
Muller Blender Costing Parameters
Number of Records: 3,081
Volume,M^2 Min. 0.5 Max. 20 Step: 0.5
Pressure Atmospheric
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 209 of 279
30020011-Roll-type extruder
Database name Roll-type extruder Level of estimate Detailed
Database code 30020011 Version 3.0.306
Standard API Date Feb 2014
Roll-type extruder Costing Parameters
Number of Records: 3,081
Volume,M^2 Min. 0.5 Max. 20 Step: 0.5
Pressure Atmospheric
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 210 of 279
30020012-Screw Extruder
Database name Screw Extruder Level of estimate Detailed
Database code 30020012 Version 3.0.306
Standard API Date Feb 2014
Screw Extruder Costing Parameters
Number of Records: 3,081
Volume,M^2 Min. 0.5 Max. 20 Step: 0.5
Pressure Atmospheric
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 211 of 279
30020013-Screw Press
Database name Screw Press Level of estimate Detailed
Database code 30020013 Version 3.0.306
Standard API Date Feb 2014
Screw Press Costing Parameters
Number of Records: 3,081
Volume,M^2 Min. 0.5 Max. 20 Step: 0.5
Pressure Atmospheric
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 212 of 279
30020014-Pug Mill Extruder
Database name Pug Mill Extruder Level of estimate Detailed
Database code 30020014 Version 3.0.306
Standard API Date Feb 2014
Pug Mill Extruder Costing Parameters
Number of Records: 3,081
Volume,M^2 Min. 0.5 Max. 20 Step: 0.5
Pressure Atmospheric
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 213 of 279
30021-Incinerator
Material Optional Material A 105 A 420 GR.WPL 6 API 5L GRADE C NITRL AL 304P
A 105 GALVANIZED A 516 GR.65 B 444 GR.N006625 SS304 BUTYL 304PG
A 106 A 516 GR.X70 B 564 GR. N06625 SS316 CB3LC 304PS
A 182 GR. F316L A 53 B366-WPNCMC (UNSN 06625) SS321 CB6LC 316LP
A 193 GR.B7 A 671 GR.CC 60 CLASS22 C 20 SS347 CMLCS 316P
A 194 GR.2H A 694 F 53 HASTB SS410 CPVC 316PG A 20 A 694 F 65 HASTC SS6LC CU 316PS A 216 GR.WCB A 694 F60 HASTELLOY SS304L EBONT 317LP A 234 GR.WPB A 860 GR. WPHY 52 HYPLN SS316L EPLCS 321P A 283 GR.C A 860 GR. WPHY 65 I800 TFELS FEP 6MOP A 312 TP 316L A 860 GR.WPHY60 IN3LC TFESS FRP A 320 GR. L7 A333A INCNL TI GRBW A 350 GR. LF2 CLASS 1 A333C INCOLOY ALLOY X42W GSLCS A 350 GR. LF2 CLASS 1 A335B MONEL X46W PPLCS A 351 GR. CF8M A335C MONEL ALLOY X52W PVC A 352 GR. LCB A335D NEPNE X56W PVDC
A 358 GR.316L CL.1 A335F NI200 X60W PVDF A 36 A335G NI201 X65W RBLCS A 360 GR. LF2
CLASS 1 API 5L GRADE A NICKLE ZR 2205P
A 403 GR.WP316L API 5L GRADE B NICKLE ALLOY 304LP
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 214 of 279
30021001-Catalytic Incinerator
Database name Catalytic Incinerator Level of estimate Detailed
Database code Version 3.0.306
Standard ASME/API/ANSI Date Feb 2014
Catalytic Incinerator Costing Parameters
Number of Records: 47,637
Duty, MBTU/Hr Min. 5
Max. 140 Step: 2
Pressure Atmospheric
Design Standard ASME
API ANSI
Feed Material Low-Hazard
Corrosive Hazardous
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 215 of 279
30021002-Cylindrical Incinerator
Database name Catalytic Incinerator Level of estimate Detailed
Database code 30021002 Version 3.0.306
Standard ASME/API/ANSI Date Feb 2014
Cylindrical Incinerator Costing Parameters
Number of Records: 49,059
Duty, MBTU/Hr Min. 1
Max. 140 Step: 2
Pressure Atmospheric
Design Standard ASME
API ANSI
Feed Material Low-Hazard
Corrosive Hazardous
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 216 of 279
30021003-Direct Flame Incinerator
Database name Direct Flame Incinerator Level of estimate Detailed
Database code 30021003 Version 3.0.306
Standard ASME/API/ANSI Date Feb 2014
Direct Flame Incinerator Costing Parameters
Number of Records: 46,215
Duty, MBTU/Hr Min. 10
Max. 140 Step: 2
Pressure Atmospheric
Design Standard ASME
API ANSI
Feed Material Low-Hazard
Corrosive Hazardous
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 217 of 279
30021004-Hearth Incinerator
Database name Hearth Incinerator Level of estimate Detailed
Database code 30021004 Version 3.0.306
Standard ASME/API/ANSI Date Feb 2014
Hearth Incinerator Costing Parameters
Number of Records: 49,059
Duty, MBTU/Hr Min. 1
Max. 140 Step: 2
Pressure Atmospheric
Design Standard ASME
API ANSI
Feed Material Low-Hazard
Corrosive Hazardous
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 218 of 279
30021005-Multi Hearth Incinerator
Database name Multi Hearth Incinerator Level of estimate Detailed
Database code 30021005 Version 3.0.306
Standard ASME/API/ANSI Date Feb 2014
Multi Hearth Incinerator Costing Parameters
Number of Records: 46,215
Duty, MBTU/Hr Min. 10
Max. 140 Step: 2
Pressure Atmospheric
Design Standard ASME
API ANSI
Feed Material Low-Hazard
Corrosive Hazardous
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 219 of 279
30021006-Rotary Kiln
Database name Rotary Kiln Level of estimate Detailed
Database code 30021006 Version 3.0.306
Standard ASME/API/ANSI Date Feb 2014
Rotary Kiln Costing Parameters
Number of Records: 49,059
Duty, MBTU/Hr Min. 1
Max. 140 Step: 2
Pressure Atmospheric
Design Standard ASME
API ANSI
Feed Material Low-Hazard
Corrosive Hazardous
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 220 of 279
30022-Centrifuge
Material Optional Material A 105 A 420 GR.WPL 6 API 5L GRADE C NITRL AL 304P A 105 GALVANIZED A 516 GR.65 B 444
GR.N006625 SS304 BUTYL 304PG
A 106 A 516 GR.X70 B 564 GR. N06625 SS316 CB3LC 304PS
A 182 GR. F316L A 53 B366-WPNCMC (UNSN 06625) SS321 CB6LC 316LP
A 193 GR.B7 A 671 GR.CC 60 CLASS22 C 20 SS347 CMLCS 316P
A 194 GR.2H A 694 F 53 HASTB SS410 CPVC 316PG A 20 A 694 F 65 HASTC SS6LC CU 316PS A 216 GR.WCB A 694 F60 HASTELLOY SS304L EBONT 317LP A 234 GR.WPB A 860 GR. WPHY 52 HYPLN SS316L EPLCS 321P A 283 GR.C A 860 GR. WPHY 65 I800 TFELS FEP 6MOP A 312 TP 316L A 860 GR.WPHY60 IN3LC TFESS FRP A 320 GR. L7 A333A INCNL TI GRBW A 350 GR. LF2 CLASS 1 A333C INCOLOY ALLOY X42W GSLCS A 350 GR. LF2 CLASS 1 A335B MONEL X46W PPLCS A 351 GR. CF8M A335C MONEL ALLOY X52W PVC A 352 GR. LCB A335D NEPNE X56W PVDC
A 358 GR.316L CL.1 A335F NI200 X60W PVDF
A 36 A335G NI201 X65W RBLCS A 360 GR. LF2
CLASS 1 API 5L GRADE A NICKLE ZR 2205P
A 403 GR.WP316L API 5L GRADE B NICKLE ALLOY 304LP
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 221 of 279
30022001-Centrifugal Separator, Bottom Driven
Database name Centrifugal Separator, Bottom Driven Level of estimate Detailed
Database code 30022001 Version 3.0.306
Standard ASME/API/ ANSI Date Feb 2014
Centrifugal Separator, Bottom Driven Costing Parameters
Number of Records: 10,902
Pressure, Bar 1
Diameter, Inch Min. 20 Max. 43 Step 0.5
Design Standard API
ASMI ANSI
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 222 of 279
30022002-Centrifugal Separator, Horizontal, Auto. Batch
Database name Centrifugal Separator, Horizontal, Auto. Batch Level of estimate Detailed
Database code 30022002 Version 3.0.306
Standard ASME/API/ ANSI Date Feb 2014
Centrifugal Separator, Horizontal, Auto. Batch Costing Parameters
Number of Records: 10,902
Pressure, Bar 1
Diameter, Inch Min. 20 Max. 43 Step 0.5
Design Standard API
ASMI ANSI
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 223 of 279
30022003-Centrifugal Separator, Top Suspended
Database name Centrifugal Separator, Top Suspended Level of estimate Detailed
Database code 30022003 Version 3.0.306
Standard ASME/API/ ANSI Date Feb 2014
Centrifugal Separator, Top Suspended Costing Parameters
Number of Records: 10,902
Pressure, Bar 1
Diameter, Inch Min. 20 Max. 43 Step 0.5
Design Standard API
ASMI ANSI
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 224 of 279
30022004-Centrifugal Separator, Vertical, Auto. Batch
Database name Centrifugal Separator, Vertical, Auto. Batch Level of estimate Detailed
Database code 30022004 Version 3.0.306
Standard ASME/API/ ANSI Date Feb 2014
Centrifugal Separator, Vertical, Auto. Batch Costing Parameters
Number of Records: 11,850
Pressure, Bar 1
Diameter, Inch Min. 20 Max. 70 Step: 1
Design Standard API
ASMI ANSI
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 225 of 279
30022005-Oscillating Screen
Database name Oscillating Screen Level of estimate Detailed
Database code 30022005 Version 3.0.306
Standard ASME/API/ ANSI Date Feb 2014
Oscillating Screen Costing Parameters
Number of Records: 4,740
Pressure, Bar 1
Diameter, Inch Min. 22 Max. 42 Step: 1
Design Standard API
ASMI ANSI
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 226 of 279
30022006-Sedimentation, Scroll Conveyor
Database name Sedimentation, Scroll Conveyor Level of estimate Detailed
Database code 30022006 Version 3.0.306
Standard ASME/API/ ANSI Date Feb 2014
Sedimentation, Scroll Conveyor Costing Parameters
Number of Records: 8,769
Pressure, Bar 1
Diameter, Inch Min. 18 Max. 55 Step: 1
Design Standard API
ASMI ANSI
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 227 of 279
30022007-Solid Bowl w/o motor
Database name Solid Bowl w/o motor Level of estimate Detailed
Database code 30022007 Version 3.0.306
Standard ASME/API/ ANSI Date Feb 2014
Solid Bowl w/o motor Costing Parameters
Number of Records: 13,746
Pressure, Bar 1
Diameter, Inch Min. 14 Max. 72 Step: 1
Design Standard API
ASMI ANSI
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 228 of 279
30022008-Disc-nozzle Centrifuge
Database name Disc-nozzle Centrifuge Level of estimate Detailed
Database code 30022008 Version 3.0.306
Standard ASME/API/ ANSI Date Feb 2014
Disc-nozzle Centrifuge Costing Parameters
Number of Records: 13,746
Pressure, Bar 1
Diameter, Inch Min. 14 Max. 72 Step: 1
Design Standard API
ASMI ANSI
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 229 of 279
30022009-Sharpless super D Centrifuge
Database name Sharpless super D Centrifuge Level of estimate Detailed
Database code 30022009 Version 3.0.306
Standard ASME/API/ ANSI Date Feb 2014
Sharpless super D Centrifuge Costing Parameters
Number of Records: 13,746
Pressure, Bar 1
Diameter, Inch Min. 14 Max. 72 Step: 1
Design Standard API
ASMI ANSI
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 230 of 279
30022010-ATM suspended basket centrifuge
Database name ATM suspended basket centrifuge Level of estimate Detailed
Database code 30022010 Version 3.0.306
Standard ASME/API/ ANSI Date Feb 2014
ATM suspended basket centrifuge Costing Parameters
Number of Records: 13,746
Pressure, Bar 1
Diameter, Inch Min. 14 Max. 72 Step: 1
Design Standard API
ASMI ANSI
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 231 of 279
30022011-Screen Bowl
Database name Screen Bowl Level of estimate Detailed
Database code 30022011 Version 3.0.306
Standard ASME/API/ ANSI Date Feb 2014
Screen Bowl Costing Parameters
Number of Records: 13,746
Pressure, Bar 1
Diameter, Inch Min. 14 Max. 72 Step: 1
Design Standard API
ASMI ANSI
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 232 of 279
30022012-Pusher Type
Database name Pusher Type Level of estimate Detailed
Database code 30022012 Version 3.0.306
Standard ASME/API/ ANSI Date Feb 2014
usher Type Costing Parameters
Number of Records: 13,746
Pressure, Bar 1
Diameter, Inch Min. 14 Max. 72 Step: 1
Design Standard API
ASMI ANSI
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 233 of 279
30023-Classifier
Material Optional Material A 105 A 420 GR.WPL 6 API 5L GRADE C NITRL AL 304P A 105 GALVANIZED A 516 GR.65 B 444
GR.N006625 SS304 BUTYL 304PG
A 106 A 516 GR.X70 B 564 GR. N06625 SS316 CB3LC 304PS
A 182 GR. F316L A 53 B366-WPNCMC (UNSN 06625) SS321 CB6LC 316LP
A 193 GR.B7 A 671 GR.CC 60 CLASS22 C 20 SS347 CMLCS 316P
A 194 GR.2H A 694 F 53 HASTB SS410 CPVC 316PG A 20 A 694 F 65 HASTC SS6LC CU 316PS A 216 GR.WCB A 694 F60 HASTELLOY SS304L EBONT 317LP A 234 GR.WPB A 860 GR. WPHY 52 HYPLN SS316L EPLCS 321P A 283 GR.C A 860 GR. WPHY 65 I800 TFELS FEP 6MOP A 312 TP 316L A 860 GR.WPHY60 IN3LC TFESS FRP A 320 GR. L7 A333A INCNL TI GRBW A 350 GR. LF2 CLASS 1 A333C INCOLOY ALLOY X42W GSLCS A 350 GR. LF2 CLASS 1 A335B MONEL X46W PPLCS A 351 GR. CF8M A335C MONEL ALLOY X52W PVC A 352 GR. LCB A335D NEPNE X56W PVDC
A 358 GR.316L CL.1 A335F NI200 X60W PVDF
A 36 A335G NI201 X65W RBLCS A 360 GR. LF2
CLASS 1 API 5L GRADE A NICKLE ZR 2205P
A 403 GR.WP316L API 5L GRADE B NICKLE ALLOY 304LP
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 234 of 279
30023001-Cyclone, Turbo Screen Classifier
Database name Cyclone, Turbo Screen Classifier Level of estimate Detailed
Database code 30023001 Version 3.0.306
Standard ASME/API/ ANSI Date Feb 2014
Cyclone, Turbo Screen Classifier Costing Parameters
Number of Records: 6,636
Pressure, Bar 1
Diameter, Inch Min. 16 Max. 30 Step: 0.5
Design Standard API
ASMI ANSI
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 235 of 279
30023002-Jig, Duplex Classifier
Database name Jig, Duplex Classifier Level of estimate Detailed
Database code 30023002 Version 3.0.306
Standard ASME/API/ ANSI Date Feb 2014
Jig, Duplex Classifier Costing Parameters
Number of Records: 7,110
Pressure, Bar 1
Diameter, Inch Min. 12 Max. 42 Step: 1
Design Standard API
ASMI ANSI
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 236 of 279
30023003-Rake Classifier
Database name Rake Classifier Level of estimate Detailed
Database code 30023003 Version 3.0.306
Standard ASME/API/ ANSI Date Feb 2014
Rake Classifier Costing Parameters
Number of Records: 5,688
Pressure, Bar 1
Diameter, Inch Min. 36 Max. 60 Step: 1
Design Standard API
ASMI ANSI
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 237 of 279
30023004-Spiral, Duplex
Database name Spiral, Duplex Level of estimate Detailed
Database code 30023004 Version 3.0.306
Standard ASME/API/ ANSI Date Feb 2014
Spiral, Duplex Costing Parameters
Number of Records: 12,798
Pressure, Bar 1
Diameter, Inch Min. 24 Max. 78 Step: 1
Design Standard API
ASMI ANSI
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 238 of 279
30023005-Spiral, Simplex
Database name Spiral, Simplex Level of estimate Detailed
Database code 30023005 Version 3.0.306
Standard ASME/API/ ANSI Date Feb 2014
Spiral, Simplex Costing Parameters
Number of Records: 14,220
Pressure, Bar 1
Diameter, Inch Min. 24 Max. 84 Step: 1
Design Standard API
ASMI ANSI
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 239 of 279
30024-Screen
Material Optional Material A 105 A 420 GR.WPL 6 API 5L GRADE C NITRL AL 304P A 105 GALVANIZED A 516 GR.65 B 444
GR.N006625 SS304 BUTYL 304PG
A 106 A 516 GR.X70 B 564 GR. N06625 SS316 CB3LC 304PS
A 182 GR. F316L A 53 B366-WPNCMC (UNSN 06625) SS321 CB6LC 316LP
A 193 GR.B7 A 671 GR.CC 60 CLASS22 C 20 SS347 CMLCS 316P
A 194 GR.2H A 694 F 53 HASTB SS410 CPVC 316PG A 20 A 694 F 65 HASTC SS6LC CU 316PS A 216 GR.WCB A 694 F60 HASTELLOY SS304L EBONT 317LP A 234 GR.WPB A 860 GR. WPHY 52 HYPLN SS316L EPLCS 321P A 283 GR.C A 860 GR. WPHY 65 I800 TFELS FEP 6MOP A 312 TP 316L A 860 GR.WPHY60 IN3LC TFESS FRP A 320 GR. L7 A333A INCNL TI GRBW A 350 GR. LF2 CLASS 1 A333C INCOLOY ALLOY X42W GSLCS A 350 GR. LF2 CLASS 1 A335B MONEL X46W PPLCS A 351 GR. CF8M A335C MONEL ALLOY X52W PVC A 352 GR. LCB A335D NEPNE X56W PVDC
A 358 GR.316L CL.1 A335F NI200 X60W PVDF
A 36 A335G NI201 X65W RBLCS A 360 GR. LF2
CLASS 1 API 5L GRADE A NICKLE ZR 2205P
A 403 GR.WP316L API 5L GRADE B NICKLE ALLOY 304LP
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 240 of 279
30024001-DSM Screen
Database name DSM Screen Level of estimate Detailed
Database code 30024001 Version 3.0.306
Standard ASME/API/ ANSI Date Feb 2014
DSM Screen Costing Parameters
Number of Records: 43,845
Pressure bar 1 bar
Surface Area, ft2 Min. 3 Max.40 Step 1
Cloth Type Heavy Carbon Steel Wire Light Carbon Steel Wire
Medium Carbon Steel Wire Polyurethane Screen
Profile Rod/Wedge Screen
Design Standard API
ASMI ANSI
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 241 of 279
30024002-Grizzly, Vibrating Screen
Database name Grizzly, Vibrating Screen Level of estimate Detailed
Database code 30024002 Version 3.0.306
Standard ASME/API/ ANSI Date Feb 2014
Grizzly, Vibrating Screen Costing Parameters
Number of Records: 40,290
Pressure bar 1 bar
Surface Area, ft2 Min. 6 Max.40 Step 1
Cloth Type Heavy Carbon Steel Wire Light Carbon Steel Wire
Medium Carbon Steel Wire Polyurethane Screen
Profile Rod/Wedge Screen
Design Standard API
ASMI ANSI
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 242 of 279
30024003-Rotary Trommel Screen
Database name Rotary Trommel Screen Level of estimate Detailed
Database code 30024003 Version 3.0.306
Standard ASME/API/ ANSI Date Feb 2014
Rotary Trommel Screen Costing Parameters
Number of Records: 80,580
Pressure bar 1 bar
Surface Area, ft2 Min. 7
Max. 75 Step 1
Cloth Type Heavy Carbon Steel Wire Light Carbon Steel Wire
Medium Carbon Steel Wire Polyurethane Screen
Profile Rod/Wedge Screen
Design Standard API
ASMI ANSI
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 243 of 279
30024004-Stationary Screen
Database name Stationary Screen Level of estimate Detailed
Database code 30024004 Version 3.0.306
Standard ASME/API/ ANSI Date Feb 2014
Stationary Screen Costing Parameters
Number of Records: 175,380
Pressure bar 1 bar
Surface Area, ft2 Min. 12
Max.160 Step 1
Cloth Type Heavy Carbon Steel Wire Light Carbon Steel Wire
Medium Carbon Steel Wire Polyurethane Screen
Profile Rod/Wedge Screen
Design Standard API
ASMI ANSI
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 244 of 279
30024005-Vibratory, 1-Deck Screen
Database name Vibratory, 1-Deck Screen Level of estimate Detailed
Database code 30024005 Version 3.0.306
Standard ASME/API/ ANSI Date Feb 2014
Vibratory, 1-Deck Screen Costing Parameters
Number of Records: 177,750
Pressure bar 1 bar
Surface Area, ft2 Min. 10
Max.160 Step: 1
Cloth Type Heavy Carbon Steel Wire Light Carbon Steel Wire
Medium Carbon Steel Wire Polyurethane Screen
Profile Rod/Wedge Screen
Design Standard API
ASMI ANSI
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 245 of 279
30024006-Vibratory, 2-Deck Screen
Database name Vibratory, 2-Deck Screen Level of estimate Detailed
Database code 30024006 Version 3.0.306
Standard ASME/API/ ANSI Date Feb 2014
Vibratory, 2-Deck Screen Costing Parameters
Number of Records: 189,600
Pressure bar 1 bar
Surface Area, ft2 Min. 32
Max.192 Step: 1
Cloth Type Heavy Carbon Steel Wire Light Carbon Steel Wire
Medium Carbon Steel Wire Polyurethane Screen
Profile Rod/Wedge Screen
Design Standard API
ASMI ANSI
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 246 of 279
30024007-Vibratory, 3-Deck Screen
Database name Vibratory, 3-Deck Screen Level of estimate Detailed
Database code 30024007 Version 3.0.306
Standard ASME/API/ ANSI Date Feb 2014
Vibratory, 3-Deck Screen Costing Parameters
Number of Records: 170,640
Pressure bar 1 bar
Surface Area, ft2 Min. 48
Max.192 Step: 1
Cloth Type Heavy Carbon Steel Wire Light Carbon Steel Wire
Medium Carbon Steel Wire Polyurethane Screen
Profile Rod/Wedge Screen
Design Standard API
ASMI ANSI
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 247 of 279
30025-Ejector
Material Optional Material A 105 A 420 GR.WPL 6 API 5L GRADE C NITRL AL 304P A 105 GALVANIZED A 516 GR.65 B 444
GR.N006625 SS304 BUTYL 304PG
A 106 A 516 GR.X70 B 564 GR. N06625 SS316 CB3LC 304PS
A 182 GR. F316L A 53 B366-WPNCMC (UNSN 06625) SS321 CB6LC 316LP
A 193 GR.B7 A 671 GR.CC 60 CLASS22 C 20 SS347 CMLCS 316P
A 194 GR.2H A 694 F 53 HASTB SS410 CPVC 316PG A 20 A 694 F 65 HASTC SS6LC CU 316PS A 216 GR.WCB A 694 F60 HASTELLOY SS304L EBONT 317LP A 234 GR.WPB A 860 GR. WPHY 52 HYPLN SS316L EPLCS 321P A 283 GR.C A 860 GR. WPHY 65 I800 TFELS FEP 6MOP A 312 TP 316L A 860 GR.WPHY60 IN3LC TFESS FRP A 320 GR. L7 A333A INCNL TI GRBW A 350 GR. LF2 CLASS 1 A333C INCOLOY ALLOY X42W GSLCS A 350 GR. LF2 CLASS 1 A335B MONEL X46W PPLCS A 351 GR. CF8M A335C MONEL ALLOY X52W PVC A 352 GR. LCB A335D NEPNE X56W PVDC
A 358 GR.316L CL.1 A335F NI200 X60W PVDF
A 36 A335G NI201 X65W RBLCS A 360 GR. LF2
CLASS 1 API 5L GRADE A NICKLE ZR 2205P
A 403 GR.WP316L API 5L GRADE B NICKLE ALLOY 304LP
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 248 of 279
30025001-Eductor Mixer
Database name Eductor Mixer Level of estimate Detailed
Database code 30025001 Version 3.0.306
Standard ASME/API/ ANSI Date Feb 2014
Eductor Mixer Costing Parameters
Number of Records: 13,509
Pressure bar 1 bar
Diameter(Inch) Min. 0.5 Max. 12 Step: 0.2
Design Standard API
ASMI ANSI
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 249 of 279
30025002-Ejector
Database name Ejector Level of estimate Detailed
Database code 30025002 Version 3.0.306
Standard ASME/API/ ANSI Date Feb 2014
Ejector Costing Parameters
Number of Records: 11,750
Pressure bar 1 bar
Diameter(Inch) Min. 1
Max. 11 Step: 0.2
Design Standard API
ASMI ANSI
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 250 of 279
30025003-Static Mixer, Jacketed
Database name Static Mixer, Jacketed Level of estimate Detailed
Database code 30025003 Version 3.0.306
Standard ASME/API/ ANSI Date Feb 2014
Static Mixer, Jacketed Costing Parameters
Number of Records: 18,249
Pressure bar 1 bar
Diameter(Inch) Min. 0.5 Max. 16 Step: 0.2
Design Standard API
ASMI ANSI
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 251 of 279
30025004-Static Mixer, Non Jacketed
Database name Static Mixer, Non Jacketed Level of estimate Detailed
Database code 30025004 Version 3.0.306
Standard ASME/API/ ANSI Date Feb 2014
Static Mixer, Non Jacketed Costing Parameters
Number of Records: 18,249
Pressure bar 1 bar
Diameter(Inch) Min. 0.5 Max. 16 Step: 0.2
Design Standard API
ASMI ANSI
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 252 of 279
30025005-Steam-jet, Four Stage with two barometric condenser
Database name Steam-jet, Four Stage with two barometric condenser Level of estimate Detailed
Database code 30025005 Version 3.0.306
Standard ASME/API/ ANSI Date Feb 2014
Steam-jet, Four Stage with two barometric Costing Parameters
Number of Records: 18,249
Pressure bar 1 bar
Diameter(Inch) Min. 0.5 Max. 16 Step: 0.2
Design Standard API
ASMI ANSI
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 253 of 279
30025006-Steam-jet, Two Stage, Non-condensing
Database name Steam-jet, Two Stage, Non-condensing Level of estimate Detailed
Database code 30025006 Version 3.0.306
Standard ASME/API/ ANSI Date Feb 2014
Steam-jet, Two Stage, Non-condensing Costing Parameters
Number of Records: 18,249
Pressure bar 1 bar
Diameter(Inch) Min. 0.5 Max. 16 Step: 0.2
Design Standard API
ASMI ANSI
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 254 of 279
30025007-Steam-jet, One-stage, Non-condensing
Database name Steam-jet, One-stage, Non-condensing Level of estimate Detailed
Database code 30025007 Version 3.0.306
Standard ASME/API/ ANSI Date Feb 2014
Steam-jet, One-stage, Non-condensing Parameters
Number of Records: 18,249
Pressure bar 1 bar
Diameter(Inch) Min. 0.5 Max. 16 Step: 0.2
Design Standard API
ASMI ANSI
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 255 of 279
30026-Agglomerators
30026001-Disk With motor Agglomerator
Database name Agglomerators Level of estimate Detailed
Database code 30026 Version 3.0.306
Standard NORSOK Standard P-100 Date Feb 2014
Disk With motor Agglomerator Costing Parameters
Number of Records: 1,027
Diameter(M) Min. 1
Max. 7.5 step: 0.5
Motor Hp Min. 10 Max. 50 step: 5
Output Kg/hr Min. 30
Max. 200 step: 10
Number of blades Min. 2
Max. 20 step: 4
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 256 of 279
30027-Agitator
30027001-Impeller, Anchor, Top Entering Agitator
30027002-Propeller, Side Entering Agitator
30027003-Propeller, Top Entering Agitator
30027004-Propeller, Closed Tank, Agitator
30027005-Propeller, Open Tank, Agitator
30027006-Turbine, Batch Reactor Agitator
30027007-Turbine, Fermentation Agitator
30027008-Turbine, Single Impeller
30027009-Turbine, Dual Impeller
30027010-Turbine, Top Entering Agitator
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 257 of 279
Database name Agitator Level of estimate Detailed
Database code 33027 Version 3.0.306
Standard API , ISO Date Feb 2014
Agitators Costing Parameters
Material A 105 A 420 GR.WPL 6 API 5L GRADE C NITRL A 105 GALVANIZED A 516 GR.65 B 444 GR.N006625 SS304 A 106 A 516 GR.X70 B 564 GR. N06625 SS316 A 182 GR. F316L A 53 B366-WPNCMC (UNSN 06625) SS321 A 193 GR.B7 A 671 GR.CC 60 CLASS22 C 20 SS347 A 194 GR.2H A 694 F 53 HASTB SS410 A 20 A 694 F 65 HASTC SS6LC A 216 GR.WCB A 694 F60 HASTELLOY SS304L A 234 GR.WPB A 860 GR. WPHY 52 HYPLN SS316L A 283 GR.C A 860 GR. WPHY 65 I800 TFELS A 312 TP 316L A 860 GR.WPHY60 IN3LC TFESS A 320 GR. L7 A333A INCNL TI A 350 GR. LF2 CLASS 1 A333C INCOLOY ALLOY X42W A 350 GR. LF2 CLASS 1 A335B MONEL X46W A 351 GR. CF8M A335C MONEL ALLOY X52W A 352 GR. LCB A335D NEPNE X56W A 358 GR.316L CL.1 A335F NI200 X60W A 36 A335G NI201 X65W A 360 GR. LF2 CLASS 1 API 5L GRADE A NICKLE ZR A 403 GR.WP316L API 5L GRADE B NICKLE ALLOY
HP Min. 3
Max. 200 Step: 20
Internal Pressure (bar) Min. 1
Max. 100 step: 5
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 258 of 279
30028-Conveyor 30028001-Apron Conveyor
30028002-Belt, Closed w/ Walkway Conveyor
30028003-Belt, Open Conveyor
30028004-Belt, Overland, Installed Conveyor
30028005-Pneumatic Conveyor
30028006-Roller Conveyor
30028007-Screw Conveyor
30028008-Vibrating Conveyor
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 259 of 279
Database name Conveyor Level of estimate Detailed
Database code 30028 Version 3.0.306
Standard IECCC Date Feb 2014
Conveyor costing parameters
Material A 105 A 420 GR.WPL 6 API 5L GRADE C NITRL A 105 GALVANIZED A 516 GR.65 B 444 GR.N006625 SS304 A 106 A 516 GR.X70 B 564 GR. N06625 SS316 A 182 GR. F316L A 53 B366-WPNCMC (UNSN 06625) SS321 A 193 GR.B7 A 671 GR.CC 60 CLASS22 C 20 SS347 A 194 GR.2H A 694 F 53 HASTB SS410 A 20 A 694 F 65 HASTC SS6LC A 216 GR.WCB A 694 F60 HASTELLOY SS304L A 234 GR.WPB A 860 GR. WPHY 52 HYPLN SS316L A 283 GR.C A 860 GR. WPHY 65 I800 A 312 TP 316L A 860 GR.WPHY60 IN3LC A 320 GR. L7 A333A INCNL A 350 GR. LF2 CLASS 1 A333C INCOLOY ALLOY A 350 GR. LF2 CLASS 1 A335B MONEL A 351 GR. CF8M A335C MONEL ALLOY A 352 GR. LCB A335D NEPNE A 358 GR.316L CL.1 A335F NI200 A 36 A335G NI201 A 360 GR. LF2 CLASS 1 API 5L GRADE A NICKLE A 403 GR.WP316L API 5L GRADE B NICKLE ALLOY
Conveyor Length(m) Min. 1
Max. 1000 Step: 50
Pressure Atmospheric
Conveyor Width Min. 0.25 Max. 54
Step: 0.25
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 260 of 279
30029-Crystallizer For material see Pressure Vessel material section VIII Div II.
30029001-Batch, Atmospheric, Crystallizer
30029002-Batch, Vacuum, Crystallizer
Database name Batch, Atmospheric, Crystallizer Level of estimate Detailed
Database code 30029 Version 3.0.306
Standard ASME Date Feb 2014
Alternative materials for parts A 105 A 420 GR.WPL 6 API 5L GRADE C NITRL
A 105 GALVANIZED A 516 GR.65 B 444 GR.N006625 SS304 A 106 A 516 GR.X70 B 564 GR. N06625 SS316
A 182 GR. F316L A 53 B366-WPNCMC (UNSN 06625) SS321 A 193 GR.B7 A 671 GR.CC 60 CLASS22 C 20 SS347 A 194 GR.2H A 694 F 53 HASTB SS410
A 20 A 694 F 65 HASTC SS6LC A 216 GR.WCB A 694 F60 HASTELLOY SS304L A 234 GR.WPB A 860 GR. WPHY 52 HYPLN SS316L
A 283 GR.C A 860 GR. WPHY 65 I800 TFELS A 312 TP 316L A 860 GR.WPHY60 IN3LC TFESS A 320 GR. L7 A333A INCNL TI
A 350 GR. LF2 CLASS 1 A333C INCOLOY ALLOY X42W A 350 GR. LF2 CLASS 1 A335B MONEL X46W
A 351 GR. CF8M A335C MONEL ALLOY X52W A 352 GR. LCB A335D NEPNE X56W
A 358 GR.316L CL.1 A335F NI200 X60W A 36 A335G NI201 X65W
A 360 GR. LF2 CLASS 1 API 5L GRADE A NICKLE ZR A 403 GR.WP316L API 5L GRADE B NICKLE ALLOY
Volume, m^3 Min. 1
Max. 30 Step: 1
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 261 of 279
30030-Cooling and Refrigeration
30030001-Air Conditioner Package
Database name Air Conditioner Package Level of estimate Detailed
Database code 30030001 Version 3.0.306
Standard ISO/TC 86, ASHRAE, AHRI Date Feb 2014
Air Conditioner Package Costing Parameters
Number of Records: 419,490
Cooling Load(MBTU/Hr) Min 0.01 Max. 3
Step: 0.05
Temperature(F) Min. 20 Max. 40 step: 2
Standards ISO/TC 86 ASHRAE
AHRI
Pressure Atmospheric
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 262 of 279
30030002-Cooling Pond
Database name Cooling Pond Level of estimate Detailed
Database code 30030002 Version 3.0.306
Standard ISO/TC 86, ASHRAE, AHRI Date Feb 2014
Cooling Pond Costing Parameters
Number of Records: 838,980
Cooling Load(MBTU/Hr) Min 10
Max. 600 Step: 5
Temperature(F) Min. 20 Max. 40 step: 2
Standards ISO/TC 86 ASHRAE
AHRI
Pressure Atmospheric
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 263 of 279
30030003-Cooling Tower, Forced Draft
Database name Cooling Tower, Forced Draft Level of estimate Detailed
Database code 30030003 Version 3.0.306
Standard ISO/TC 86, ASHRAE, AHRI Date Feb 2014
Cooling Tower, Forced Draft Costing parameters
Number of Records: 838,980
Cooling Load(MBTU/Hr) Min 10
Max. 600 Step: 5
Temperature(F) Min. 20 Max. 40 step: 2
Standards ISO/TC 86 ASHRAE
AHRI
Pressure Atmospheric
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 264 of 279
30030004-Cooling Tower, Induced Draft
Database name Cooling Tower, Induced Draft Level of estimate Detailed
Database code 30030004 Version 3.0.306
Standard ISO/TC 86, ASHRAE, AHRI Date Feb 2014
Cooling Tower, Induced Draft Costing Parameters
Number of Records: 838,980
Cooling Load(MBTU/Hr) Min 10
Max. 600 Step: 5
Temperature(F) Min. 20 Max. 40 step: 2
Standards ISO/TC 86 ASHRAE
AHRI
Pressure Atmospheric
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 265 of 279
30030005-Refrigeration
Database name Refrigeration Level of estimate Detailed
Database code 30030005 Version 3.0.306
Standard ISO/TC 86, ASHRAE, AHRI Date Feb 2014
Refrigeration Costing Parameters
Number of Records: 561,690
Cooling Load(MBTU/Hr) Min 0.2
Max. 400 Step: 5
Temperature(F) Min. -20 Max. 40 step: 2
Standards ISO/TC 86 ASHRAE
AHRI
Pressure Atmospheric
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 266 of 279
30031-Reboiler
Materials used in NoDoC for costing of Reboiler which have been extracted from ASME Section VIII Div, are shown in the following table.
Type of material Subsection C Material tables Carbon and Low Alloy Steels
Part UCS UCS 23
Nonferrous Materials Part UNF
UNF 23.1 – Aluminum and Aluminum Alloys UNF 23.2 – Copper and Copper Alloys UNF 23.3 – Nickel, Cobalt and High Nickel Alloys UNF 23.4 – Titanium and Titanium Alloys UNF 23.5 – Zirconium
High Alloy Steels Part UHA UHA 23 Cast Iron Part UCI UCI 23 Cast Ductile Iron Part UCD UCD 23
UNS Series Metal type(s)
A00001 to A99999 Aluminum and aluminum alloys
C00001 to C99999 Copper and copper alloys
F00001 to F99999 Cast irons G00001 to G99999 AISI and SAE carbon and alloy steels (except tool steels) J00001 to J99999 Cast steels (except tool steels) N00001 to N99999 Nickel and nickel alloys R00001 to R99999 Reactive and refractory metals and alloys
S00001 to S99999 Heat and corrosion resistant (stainless) steels
Following tables shows the list of materials that are the detailed list of materials.
CARBON AND LOW ALLOY STEEL
Spec. No. Type/Grade Spec. No. Type/Grade Spec. No. Type/Grade
SA-36 . . . SA-302 A, B, C, D SA-508 1, 1A, 2 Cl. 1, 3 Cl. 1, 3V, 4N Cl. 3, 22 Cl. 3 SA-53 E/A, E/B, S/A, S/B SA-307 B SA-515 60, 65, 70 SA-105 . . . SA-320 L7, L7A, L7M, L43 SA-516 55, 60, 65, 70 SA-106 A, B, C SA-325 1 SA-524 I, II SA-135 A, B SA-333 1, 3, 4, 6, 7, 9 SA-533 A Cl. 1 & 2, B Cl. 1 & 2, SA-178 A, C SA-334 1, 3, 6, 7, 9 C Cl. 1 & 2, D Cl. 2
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 267 of 279
CARBON AND LOW ALLOY STEEL
Spec. No. Type/Grade Spec. No. Type/Grade Spec. No. Type/Grade
SA-179 . . . SA-335 P1, P2, P5, P5b, P5c, SA-537 Cl.1, 2, & 3 P9, P11, P12, P15, SA-540 B21, B22, B23, B24, SA-181 . . . P21, P22, P91 B24V SA-182 FR, F1, F2, F3V, F5, SA-336 F1, F3V, F5, F5A, F9,
F5a, F9, F11 Cl. 1 & F11 Cl. 2 & 3, F12, SA-541 1, 1A, 2 Cl. 1, 3 Cl. 1, 3V,
2, F12 Cl. 1 & 2, F21 Cl. 1 & 3, F22 Cl. 22 Cl. 3, 22V
F21, F22 Cl. 1 & 3, 1 & 3, F22V, F91, SA-542 B Cl. 4, C Cl. 4a, D Cl. 4a
F22V, F91 F304, F304H, F304L, F304N, F310, F316, SA-556 A2, B2, C2 SA-192 . . . F316H, F316L, SA-557 A2, B2, C2 SA-193 B5, B7, B7M, B16 F316N, F321, F321H, SA-199 T5, T9, T11, T21, T22 F347, F347H, F348, SA-562 . . . F348H, FXM-11, SA-202 A, B FXM-27Cb SA-574 . . . SA-203 A, B, D, E, F SA-204 A, B, C SA-350 LF1, LF2, LF3, LF5, LF9 SA-587 . . . SA-209 T1, T1a, T1b SA-210 A-1, C SA-352 LCB, LC1, LC2, LC3 SA-612 . . . SA-354 BC, BD SA-213 T2, T5, T5b, T5c, T9, SA-620 . . . T11, T12, T17, T21, SA-369 FP1, FP2, FP5, FP9, T22, T91 FP11, FP12, FP21, SA-662 A, B, C SA-214 . . . FP22 SA-216 WCA, WCB, WCC SA-675 45, 50, 55, 60, 65, 70 SA-217 C12, C5, WC1, WC4, SA-372 A, B, C, D, E Cl. 65 & 70, WC5, WC6, WC9 F Cl. 70, G Cl. 70, SA-695 B/35, B/40 H Cl. 70, J Cl. 65, 70, & SA-225 C 110, L, M Cl. A & B SA-727 . . . SA-226 . . . SA-387 2, 5, 11, 12, 21, 22, 91 SA-737 B, C SA-234 WPB, WPC, WPR, WP1, SA-738 A, B, C WP5, WP9, WP11 Cl. 1, SA-414 A, B, C, D, E, F, G SA-739 B11, B22 WP12 Cl. 1, WP22 Cl. 1 SA-420 WPL 3, WPL 6, WPL 9 SA-765 I, II, III SA-250 T1, T1a, T1b SA-423 1, 2 SA-812 65, 80 SA-266 1, 2, 3, 4 SA-437 B4B, B4C SA-832 21V, 22V SA-283 SA-285
A, B, C, D A, B, C SA-449 . . . SA-836 . . .
SA-455 . . . SA-299 . . . SA/CSA-
G40.21 38W
SA-487 1 Cl. A & B, 2 Cl. A & B, 4 Cl. A, 8 Cl. A
NONFERROUS METALS — ALUMINUM AND ALUMINUM ALLOY PRODUCTS
Spec. No. Alloy Design./UNS No. Spec. No. Alloy Desig./UNS No.
SB-26 A02040, A03560, A24430 SB-221 A91060, A91100, A92024, A93003, A95083,
A95086, A95154, A95454, A95456, A96061,
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 268 of 279
SB-108 A02040, A03560 A96063
SB-209 Alclad 3003, 3004, 6061; A91060, A91100, SB-234 Alclad 3003; A91060, A93003, A95052, A95454,
A93003, A93004, A95052, A95083, A95086, A96061 A95154, A95254, A95454, A95456, A95652, A96061 SB-241 Alclad 3003; A91060, A91100, A93003,
A95052, A95083, A95086, A95454,A95456, A96061, SB-210 Alclad 3003; A91060, A93003, A95052, A96063 A95154, A96061, A96063 SB-247 A92014, A93003, A95083, A96061 SB-211 A92014, A92024, A96061
SB-308 A96061
NONFERROUS METALS — COPPER AND COPPER ALLOYS
Spec. No. UNS No. Spec. No. UNS No.
SB-42 C10200, C12000, C12200 SB-171 C36500, C44300, C44400, C44500, C46400,
SB-43 C23000 C46500, C61400, C63000, C70600, C71500
SB-61 C92200 SB-187 C10200, C11000
SB-62 C83600 SB-271 C95200
SB-75 C10200, C12000, C12200, C14200 SB-283 C37700, C64200
SB-96 C65500 SB-315 C65500
SB-98 C65100, C65500, C66100 SB-359 C70600
SB-111 C10200,C12000, C12200, C14200, C19200, C23000, C28000, C44300, C44400, C44500, C60800, C68700, C70400, C70600, C71000,
SB-395 C10200, C12000, C12200, C14200, C19200, C23000, C44300, C44400, C44500, C60800, C68700, C70600, C71000, C71500
C71500, C72200 SB-466 C70600, C71000, C71500 SB-135 C23000 SB-467 C70600
SB-148 C95200, C95400 SB-543 C12200, C19400, C23000, C44300, C44400,
SB-150 C61400, C62300, C63000, C64200 C44500, C68700, C70400, C70600, C71500
SB-152 C10200, C10400, C10500, C10700, C11000, SB-584 C92200, C93700, C97600
C12200, C12300
SB-169 C61400
NONFERROUS METALS — NICKEL AND HIGH NICKEL ALLOYS Spec. No. UNS No. Spec. No.
UNS No.
SB-626 N06002, N06007, N06022, N06030,
N06059, SB-677 N08904, N08925
N06455, N06975, N06985, N08320,
N10001,
N10276, N10665, R30556 SB-688 N08366, N08367
SB-637 N07718, N07750 SB-690 N08366, N08367
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 269 of 279
SB-649 N08904, N08925 SB-691 N08366, N08367
SB-668 N08028 SB-704 N06625, N08825
SB-672 N08700 SB-705 N06625, N08825
SB-673 N08904, N08925 SB-709 N08028
SB-674 N08904, N08925 SB-710 N08330
SB-675 N08366, N08367 SB-729 N08020
SB-676 N08366, N08367 SB-804 N08367
NONFERROUS METALS — TITANIUM AND TITANIUM ALLOYS
Spec. No. UNS No.
Spec. No. UNS No.
SB-265 R50250, R50400, R50550, R52250, R52252, R52400,
SB-363 R50250, R50400, R50550, R52400, R53400
R52402, R53400, R56320 SB-367 R50400, R50550 SB-337 R50250, R50400, R50550, R52400, R53400,
R56320
SB-381 R50250, R50400, R50550, R52400, R52402, SB-338 R50250, R50400, R50550, R52400, R52402,
R53400, R53400
R56320
SB-348 R50250, R50400, R50550, R52400, R52402, R53400
NONFERROUS METALS — ZIRCONIUM
Spec. No. UNS No. Spec. No. UNS No.
SB-493 SB-523 SB-550
R60702, R60702, R60702,
R60705 R60705 R60705
SB-551 SB-658 R60702, R60705 R60702, R60705
HIGH ALLOY STEEL
Spec. No. UNS No. Type/Grade Spec. No. UNS
No. Type/Grade Spec. No.
UNS No. Type/Grade
SA-182 S20910 FXM-19 S34800 TP348 S44700 . . .
S21904 FXM-11 S34809 TP348H S44800 . . . S30400 F304 S38100 XM-15 S30403 F304L SA-249 S20910 TPXM-19 S30409 F304H SA-217 J91150 CA15 S24000 TPXM-29 S30815 F45 S30400 TP304
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 270 of 279
HIGH ALLOY STEEL
Spec. No. UNS No. Type/Grade Spec. No. UNS
No. Type/Grade Spec. No.
UNS No. Type/Grade
S31000 S31254 S31600 S31603 S31609 S31700 S31703 S31803 S32100 S32109 S34700 S34709 S34800 S34809 S41000 S44627
F310 F44 F316 F316L F316H F317 F317L F51 F321 F321H F347 F347H F348 F348H F6a Cl. 1 & 2 FXM-27Cb
SA-240 S20100 S20400 S20910 S24000 S30200 S30400 S30403 S30409 S30451 S30815 S30908 S30909 S30940 S31008 S31009 S31040
201-1, 201-2 204 XM-19 XM-29 302 304 304L 304H 304N . . . 309S 309H 309Cb 310S 310H 310Cb
S30403 S30409 S30451 S30815 S30908 S30909 S30940 S31008 S31009 S31040 S31050 S31254 S31600 S31603 S31609 S31651
TP304L TP304H TP304N . . . TP309S TP309H TP309Cb TP310S TP310H TP310Cb TP310MoLN . . . TP316 TP316L TP316H TP316N
S31050 310MoLN S31700 TP317 SA-193 S21800 B8S, B8SA S31200 . . . S31703 TP317L S30400 B8 Cl. 1 & 2 S31254 . . . S31725 . . . S30451 B8NA Cl. 1A S31260 . . . S32100 TP321 S30500 B8P Cl. 1 &
2 S31600 316 S32109 TP321H
S31600 B8M Cl.1& 2,
S31603 316L S34700 TP347
B8M2 Cl. 2 S31609 316H S34709 TP347H S31651 B8MNA Cl.
1A S31635 316Ti S34800 TP348
S32100 B8T Cl. 1 & 2
S31640 316Cb S34809 TP348H
S34700 B8C Cl. 1 & 2
S31651 316N S38100 TPXM-15
S41000 B6 S31700 317 S31703 317L SA-268 S40500 TP405 SA-213 S20910 XM-19 S31725 . . . S40800 . . . S30400 TP304 S31803 . . . S40900 TP409 S30403 TP304L S32100 321 S41000 TP410 S30409 TP304H S32304 . . . S42900 TP429 S30451 TP304N S32550 . . . S43000 TP430 S30815 . . . S32900 329 S43035 TP439 S30908 TP309S S32950 . . . S44400 . . . S30909 TP309H S34700 347 S44600 TP446-1, S30940 TP309Cb S34709 347H TP446-2 S31008 TP310S S34800 348 S44626 XM-33 S31009 TP310H S38100 XM-15 S44627 XM-27 S31040 TP310Cb S40500 405 S44635 . . . S31050 TP310MoLN S40900 409 S44660 26-3-3 S31600 TP316 S41000 410 S44700 29-4 S31603 TP316L S41008 410S S44735 . . . S31609 TP316H S42900 429 S44800 29-4-2 S31651 TP316N S43000 430 S31725 . . . S44000 . . . SA-312 S20910 TPXM-19 S32100 TP321 S44626 XM-33 S21904 TPXM-11
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 271 of 279
HIGH ALLOY STEEL
Spec. No. UNS No. Type/Grade Spec. No. UNS
No. Type/Grade Spec. No.
UNS No. Type/Grade
S32109 TP321H S44627 XM-27 S24000 TPXM-29 S34700 TP347 S44635 . . . S30400 TP304 S34709 TP347H S44660 26-3-3 S30403 TP304L
S30409 TP304H J92600 CF8, CF8A S31600 FP316
S30451 TP304N J92710 CF8C S31609 FP316H S30815 . . . J92800 CF3M S31651 FP316N S30908 TP309S J92900 CF8M S32100 FP321 S30909 TP309H J93000 CG8M S32109 FP321H S30940 TP309Cb J93254 CK3MCuN S34700 FP347 S31008 TP310S J93345 CE8MN S34709 FP347H S31009 TP310H J93400 CH8 S31040 TP310Cb J93402 CH20 SA-452 S30409 TP304H S31050 TP310MoLN J93790 CG6MMN S31609 TP316H S31254 . . . J94202 CK20 S34709 TP347H S31600 TP316 . . . CT15C S31603
S31609 S31651
TP316L TP316H TP316N SA-358
J94651 S31254
CN-3MN . . .
SA-453 S63198 S66286
651 Cl. A & B 660 Cl. A & B
S31700 S31703 S31725 S32100 S32109 S34700 S34709 S34800 S34809 S38100
TP317 TP317L . . . TP321 TP321H TP347 TP347H TP348 TP348H TPXM-15
SA-376 S31725 S30400 S30409 S30451 S31600 S31609 S31651 S31725 S32100
. . . TP304 TP304H TP304N TP316 TP316H TP316N . . . TP321
SA-479 S20910 S24000 S30200 S30400 S30403 S30409 S30815 S30908 S30909 S30940
XM-19 XM-29 302 304 304L 304H . . . 309S 309H 309Cb
SA-320 S30323 S30400 S31600 S32100 S34700
B8F Cl. 1, B8FA Cl. 1A B8 Cl. 1 & 2, B8A Cl. 1A B8M Cl.1& 2, B8MA Cl. 1A B8T Cl. 1 & 2 B8C Cl. 1 & 2, B8CA Cl. 1A
SA-403
S32109 S34700 S34709 S34800 S20910 S30400 S30403 S30409 S30451
TP321H TP347 TP347H TP348 XM-19 304 304L 304H 304N
S31008 S31009 S31040 S31600 S31603 S31725 S32100 S32550 S34700 S34800
310S 310H 310Cb 316 316L . . . 321 . . . 347 348
S30900 309 S40500 405 SA-336 S21904 FXM-11 S31000 310 S41000 410 S30400 F304 S31600 316 S43000 430 S30403 F304L S31603 316L S43035 439 S30409 F304H S31609 316H S44627 XM-27 S30451 F304N S31651 316N S44700 . . . S31000 F310 S31700 317 S44800 . . . S31600 F316 S31703 317L S31603
S31609 F316L F316H
S32100 S32109
321 321H
SA-564 S17400 630
S31651 S32100 S32109
F316N F321 F321H
S34700 S34709 S34800
347 347H 348
SA-666 S20100 S21904
201-1, 201-2 XM-11
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 272 of 279
HIGH ALLOY STEEL
Spec. No. UNS No. Type/Grade Spec. No. UNS
No. Type/Grade Spec. No.
UNS No. Type/Grade
S34700 S34709
F347 F347H
S34809 348H SA-688 S24000 TPXM-29
S34800 S34809
F348 F348H SA-409 S31725 . . . S30400 S30403
TP304 TP304L
S44627 FXM-27Cb SA-430 S30400 FP304 S30451 S31600
TP304N TP316
SA-351 J92500 J92590
CF3, CF3A CF10
S30409 S30451
FP304H FP304N
S31603 TP316L
SA-705 S17400 630 SA-731 S44626 TPXM-33 SA-790 S31260 . . . SA-813 S30908 TP309S
S44627 TPXM-27 S31500 . . . S30940 TP309Cb
S31803 . . . S31008 TP310S SA-747 J92180 CB7Cu-1 S32304 . . . S31040 TP310Cb S32550 . . . SA-789 S31260
S31500 S31803
. . .
. . .
. . .
S32750 S32900 S32950
. . .
. . .
. . .
SA-814 S30908 S30940 S31008
TP309S TP309Cb TP310S
S32304 . . . S31040 TP310Cb S32550 . . . SA-803 S43035 TP439 S32750 . . . S44660 26-3-3 SA-815 S31803 . . . S32900 . . . S32950 . . .
FERRITIC STEELS WITH PROPERTIES ENHANCED BY HEAT TREATMENT
Spec. No. Type/Grade Spec. No. Type/Grade
SA-333 8
SA-522 I
SA-334 8 SA-533 B Cl. 3,
SA-353 . . . SA-543 B, C
SA-420 WPL8 SA-553 I, II
SA-487 4 Cl. B & E, CA6NM SA-592 A, E, F
SA-508 4N Cls. 1, 2 SA-645 . . .
SA-517 A, B, E, F, J, P SA-724 A, B, C
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 273 of 279
Alternative material for reboiler parts
A 105 A 420 GR.WPL 6 API 5L GRADE C NITRL A 105 GALVANIZED A 516 GR.65 B 444 GR.N006625 SS304 A 106 A 516 GR.X70 B 564 GR. N06625 SS316 A 182 GR. F316L A 53 B366-WPNCMC (UNSN 06625) SS321 A 193 GR.B7 A 671 GR.CC 60 CLASS22 C 20 SS347 A 194 GR.2H A 694 F 53 HASTB SS410 A 20 A 694 F 65 HASTC SS6LC A 216 GR.WCB A 694 F60 HASTELLOY SS304L A 234 GR.WPB A 860 GR. WPHY 52 HYPLN SS316L A 283 GR.C A 860 GR. WPHY 65 I800 TFELS A 312 TP 316L A 860 GR.WPHY60 IN3LC TFESS A 320 GR. L7 A333A INCNL TI A 350 GR. LF2 CLASS 1 A333C INCOLOY ALLOY X42W
A 350 GR. LF2 CLASS 1 A335B MONEL X46W
A 351 GR. CF8M A335C MONEL ALLOY X52W A 352 GR. LCB A335D NEPNE X56W A 358 GR.316L CL.1 A335F NI200 X60W A 36 A335G NI201 X65W A 360 GR. LF2 CLASS 1 API 5L GRADE A NICKLE ZR
A 403 GR.WP316L API 5L GRADE B NICKLE ALLOY For i
nformatio
n only
,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 274 of 279
30031001-Kettle Reboiler
Database name Kettle Reboiler Level of estimate Detailed
Database code 30031001 Version 3.0.306
Standard ASME Section VIII Div I, II Date Feb 2014
Kettle Reboiler Costing Parameters
Number of Records: 3,488,640
Header configuration Pipe & bend
Plug box Cover plate
Design Standards API
TEMA R TEMA C
ASME Section VIII, Div. 1 Canadian Standards
NACE MR0175 UBC Building Codes
ATEX CE
PED
Area Min 10 m^2
Max. 14000 m^2 Step: 300
Internal Pressure Full Vacuum Min. 100 psi Max. 900 psi
step: 50
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 275 of 279
30032-Compressor
30032001-Centrifugal Compressor
30032002-Centrifugal-Rotary Compressor
30032003-Centrifugal-Turbine Compressor
30032004-Centrifugal-Motor Compressor
30032005-Axial Compressor
30032006-Reciprocating, single acting Compressor
30032007-Reciprocating, double acting Compressor
30032008-Reciprocating, Diaphragm Compressor
30032009-Reciprocating-Gas Engine Compressor
30032010-Reciprocating-Motor Compressor
30032011-Reciprocating-Steam Compressor
30032012-Rotary, lobe Compressor
30032013-Rotary, liquid ring Compressor
30032014-Rotary, Screw Compressor
30032015-Rotary, scroll Compressor
30032016-Rotary, vane Compressor
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 276 of 279
30032017-Reciprocating, Water Cooled Compressor
30032018-Reciprocating, Water Cooled Compressor
30032019-Reciprocating, Water Cooled Compressor
30032020-Reciprocating, Air Cooled Compressor
30032021-Rotary Sliding Vane Compressor
30032022-Rotary, Helical Screw Compressor
30032023-Rotary, Straight Lobe Compressor
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 277 of 279
Database name Centrifugal Compressor Level of estimate Detailed
Database code 30032 Version 3.0.306
Standard API 617,618,619,672,681 Date Feb. 2014
Material for Compressor parts Shaft Impeller/Body
ASTM A 470, Class 1 ASTM B 26, Alloy C355 ASTM B 221, Alloy 6061 or 7075 ASTM A 473 Type 410
ASTM A 470, Class 7 ASTM A 747, Type CB7CU-1 or CB7CU-2
ASTM B 247, Alloy 2618,6061 or 7075
ASTM A 240 Type 304, 304L, 316 or 316L
AISI Types 1040 – 1050c ASTM A 148 AMS 4108, Alloy 7050 ASTM A 473 Type 304, 304L, 316, or 316L
AISI Types 4140 – 4150c ASTM A 487 Gs 4Q AISI Types 4130 – 4140c UNS S42400
AISI Type 2320c ASTM A 743/744 or A 351, Grade CA15 or CA6NM AISI Types 4320 – 4345c ASTM A 705, Type 630
or XM-12
ASTM A 522, Type 1 ASTM A 743/744 or A 351, Grade CF3, CF3M, CF8 or CF8M AISI Type 3140c ASTM A 693, Type 630
or XM-12 ASTM 4340 – 4345 ASTM A 356 or A 357 ASTM A 543 SAE AMS 4646 ASTM A 336, Grade F6 ASTM B 367, Grade C3 or C4 ASTM A 522, Type I ASTM B 127 ASTM A 473, Type 410 ASTM B 367, Grade C5 ASTM A 522, Type II QQ-N-286 ASTM A 705, Types 630 or XM-12 ASTM B 209, Alloy 6061 or 7075 ASTM A 353 AISI Type 403c
ASTM A 564, Type 630 or XM-12 ASTM B 211, Alloy 6061 or 7075
Labyrinths Impeller inter stage shaft seal and balance piston Balance piston Shaft sleeves
ASTM B 26, Alloy 443, 335, 850,A850 or B850 ASTM A 470, Class 1 AISI Types 4130 – 4150c
6061-T6 or 1100 ASTM A 470, Class 7 AISI Types 4320 – 4345c ASTM B 23 AISI Types, 1040 – 1050c ASTM A 470, Class 7 ASTM B 16 or B 21 AISI Types, 4130 – 4145c ASTM A 522, Type I ASTM B 36 AISI Types 4330, 4345c ASTM A 106 ASTM B 171 AISI Type 2320c ASTM A 350 AISI Type 403, 410, 416, 303,304 or 316 ASTM A 522, Type I ASTM A 350, Grade LF-3 ASTM B 462 ASTM A 336, Grade F6 AISI Types 403 or 410c ASTM A 240, Type 304, 304L, 316 or 316L ASTM A 473, Type 410 ASTM B 164 or SAE AMS 4676 ASTM B 164 AISI Type 403 or 410c ASTM B 574, Alloy N10276 ASTM B 29 ASTM A 705, Type 630 or XM-12 ASTM A 494, Grade CW-12M-1 Micarta, NEMA, Grade LE SAE AMS 4676 A 705 Type 630 or XM-12
Micarta, NEMA, Grade G10 or G9
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 278 of 279
Alternative Material for parts
A 105 A 420 GR.WPL 6 API 5L GRADE C NITRL A 105 GALVANIZED A 516 GR.65 B 444 GR.N006625 SS304
A 106 A 516 GR.X70 B 564 GR. N06625 SS316 A 182 GR. F316L A 53 B366-WPNCMC (UNSN 06625) SS321 A 193 GR.B7 A 671 GR.CC 60 CLASS22 C 20 SS347 A 194 GR.2H A 694 F 53 HASTB SS410 A 20 A 694 F 65 HASTC SS6LC A 216 GR.WCB A 694 F60 HASTELLOY SS304L A 234 GR.WPB A 860 GR. WPHY 52 HYPLN SS316L A 283 GR.C A 860 GR. WPHY 65 I800 TFELS A 312 TP 316L A 860 GR.WPHY60 IN3LC TFESS A 320 GR. L7 A333A INCNL TI A 350 GR. LF2 CLASS 1 A333C INCOLOY ALLOY X42W
A 350 GR. LF2 CLASS 1 A335B MONEL X46W
A 351 GR. CF8M A335C MONEL ALLOY X52W A 352 GR. LCB A335D NEPNE X56W A 358 GR.316L CL.1 A335F NI200 X60W
A 36 A335G NI201 X65W A 360 GR. LF2 CLASS 1 API 5L GRADE A NICKLE ZR
A 403 GR.WP316L API 5L GRADE B NICKLE ALLOY
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
NoDoC Database Data Sheet Volume I, Chapter 3, Part One
Mechanical Equipment
Page 279 of 279
Number of Records: 220,722,840
Delta P Min: 0.5 bar Max: 500 bar
Step : 50
Power Min: 10 kW
Max: 10000 kW Step : 50
Number of Stage
One
Two
Three
Four
Five
Six
Seven
Eight
Nine
Ten
Services
Sweet
Sour
Compressor driver type No driver
Standard motor driver Turbine driver
Gas turbine driver Gas engine driver
Volumetric flow
Min: 5 m3/hr
Max: 2000 m3/hr Step : 50
Seal type Packing
Single mechanical seal Tandem mechanical seal Double mechanical seal
Cooling
Water
Air
Fluid
Air
Gas
Other Intake Temp °C
Min: 10 bar Max: 140 Step : 20
Instrumentation & control Yes No
For info
rmation o
nly,
DIONE OIL Ltd.
COPYRIGHT @ 20
14-201
5
top related