copyright © 2001-2013 anviz global inc. usa anviz overseas technical support team 8/27/2013 lesson...

Copyright © 2001-2013 Anviz Global Inc. USA

Anviz Overseas Technical Support Team 8/27/2013

Lesson 4-Access Control Solution

Access Control Application Area

Residential Security

Public Security

Government Financial Transportation

Healthcare Education Critical Infrastructure

Commercial Hospitality & Gaming

Business Security

Home Residential Security

Retail Chain

Access Control System Block Diagram

ReaderReader

E-LockE-Lock

ComputerComputer

Summary: Also known as access control systems, is the use of computers, access control, power locks, card readers, management software, and information carriers (cards, fingerprints, hand geometry, iris, etc) and other equipment for the implementation of intelligent management entrance channel security systems.

CardCard

ControllerController

Access Control System Components

Finger print Palm print Iris

Face Voice Signature

Biometric Features

Password Barcode Card

Magnetic strip card Proximity Card

Employee Codes

Identification Verification Unit

Process and Control Unit

Controller

Execute Unit

E-Lock

Sensor and Alarm UnitWarning LightSpeakerExit Button Emergency Button

Controller Communication Unit

Manage and Set Unit

1.Set the Verification Mode

2.Set the Privilege

3.Control the door Status

4.Monitor the door’s Status

5.Inquiry all the Records

E-Lock basic working theory

In fact,the NC port is connecting with “+12V”.

When power on, the COM is connected to NC, Powers the Lock and Locks. When verify successfully, the relay jump to NO, Powers off the Lock and unlocks.

Normally, the Access Control Supply’s GND is not connect with the PUSH port;When verify successfully, the COM connected to NO, the GND will be connected to PUSH. Back to the above shot.

How to realise Anti-Pass function

VF30+T5S+AEL201+Exit Button

Features:Anti-Pass Back feature is designed to prevent misuse of the access control system. This feature sets a specific sequence in which users’ credentials must be used in order for the system to grant access.

Interim signal module

Features:1.Even the device outside is broken,the door still keep locked.2.Decrease the load.3.Low the instantaneous to the device when E-Lock power off.

SC011 Authentication

T50M+SC011+AEL201+Exit Button

Case Study

"All in one card” Block Diagram

"All in one card“ Components

Anviz Overseas Technical Support Team

Thank You